1 files changed, 0 insertions, 140 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0663-dts-bcm2711-add-High-Peripheral-mode-overlay.patch b/target/linux/bcm27xx/patches-5.4/950-0663-dts-bcm2711-add-High-Peripheral-mode-overlay.patch
deleted file mode 100644
index e24f5de000..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0663-dts-bcm2711-add-High-Peripheral-mode-overlay.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From f6d6731d8e896ab029466547dfa66d91a9a6b73a Mon Sep 17 00:00:00 2001
-From: Hristo Venev <hristo@venev.name>
-Date: Wed, 22 Apr 2020 16:34:59 +0300
-Subject: [PATCH] dts: bcm2711: add "High Peripheral" mode overlay
-
-The following addresses change:
-
- - 0xfc00_0000 -> 0x4_7c00_0000
- - 0xff80_0000 -> 0x4_c000_0000
-
-The range 0xfc00_0000-0xffff_ffff becomes available as system RAM on
-devices with >= 4 GiB of RAM. Firmware should initialize the memory node
-appropriately.
-
-Signed-off-by: Hristo Venev <hristo@venev.name>
----
- arch/arm/boot/dts/bcm2711-rpi.dtsi            |  2 +-
- arch/arm/boot/dts/overlays/Makefile           |  1 +
- arch/arm/boot/dts/overlays/README             |  6 ++
- .../boot/dts/overlays/highperi-overlay.dts    | 64 +++++++++++++++++++
- arch/arm/boot/dts/overlays/overlay_map.dts    |  4 ++
- 5 files changed, 76 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/overlays/highperi-overlay.dts
-
---- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
-+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
-@@ -16,7 +16,7 @@
- 		compatible = "arm,cortex-a72-pmu", "arm,cortex-a15-pmu";
- 	};
- 
--	v3dbus {
-+	v3dbus: v3dbus {
- 		compatible = "simple-bus";
- 		#address-cells = <1>;
- 		#size-cells = <2>;
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -64,6 +64,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- 	hifiberry-dacplushd.dtbo \
- 	hifiberry-digi.dtbo \
- 	hifiberry-digi-pro.dtbo \
-+	highperi.dtbo \
- 	hy28a.dtbo \
- 	hy28b.dtbo \
- 	hy28b-2017.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1019,6 +1019,12 @@ Load:   dtoverlay=hifiberry-digi-pro
- Params: <None>
- 
- 
-+Name:   highperi
-+Info:   Enables "High Peripheral" mode
-+Load:   dtoverlay=highperi
-+Params: <None>
-+
-+
- Name:   hy28a
- Info:   HY28A - 2.8" TFT LCD Display Module by HAOYU Electronics
-         Default values match Texy's display shield
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/highperi-overlay.dts
-@@ -0,0 +1,64 @@
-+/*
-+ * highperi.dts
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2711";
-+
-+	fragment@0 {
-+		target = <&soc>;
-+		#address-cells = <2>;
-+		#size-cells = <1>;
-+
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges = <0x7c000000  0x4 0x7c000000  0x04000000>,
-+				 <0x40000000  0x4 0xc0000000  0x00800000>;
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&scb>;
-+		#address-cells = <2>;
-+		#size-cells = <1>;
-+
-+		__overlay__ {
-+			#address-cells = <2>;
-+			#size-cells = <2>;
-+			ranges = <0x0 0x7c000000  0x4 0x7c000000  0x0 0x04000000>,
-+				 <0x0 0x40000000  0x4 0xc0000000  0x0 0x00800000>,
-+				 <0x6 0x00000000  0x6 0x00000000  0x0 0x40000000>,
-+				 <0x0 0x00000000  0x0 0x00000000  0x1 0x00000000>;
-+			dma-ranges = <0x0 0x00000000  0x0 0x00000000  0x2 0x00000000>;
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&v3dbus>;
-+		#address-cells = <2>;
-+		#size-cells = <1>;
-+
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <2>;
-+			ranges = <0x7c500000  0x4 0x7c500000  0x0 0x03300000>,
-+				 <0x40000000  0x4 0xc0000000  0x0 0x00800000>;
-+		};
-+	};
-+
-+	fragment@3 {
-+		target = <&emmc2bus>;
-+		#address-cells = <2>;
-+		#size-cells = <1>;
-+
-+		__overlay__ {
-+			#address-cells = <2>;
-+			#size-cells = <1>;
-+			ranges = <0x0 0x7e000000  0x4 0x7e000000  0x01800000>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/overlays/overlay_map.dts
-+++ b/arch/arm/boot/dts/overlays/overlay_map.dts
-@@ -5,6 +5,10 @@
- 		deprecated = "use i2c-sensor,bmp085";
- 	};
- 
-+	highperi {
-+		bcm2711;
-+	};
-+
- 	i2c0-bcm2708 {
- 		deprecated = "use i2c0";
- 	};