1 files changed, 201 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0660-dt-Update-all-mainline-bcm283x-dt-files-for-i2c0-pin.patch b/target/linux/bcm27xx/patches-5.4/950-0660-dt-Update-all-mainline-bcm283x-dt-files-for-i2c0-pin.patch
new file mode 100644
index 0000000000..f5e4e4b008
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.4/950-0660-dt-Update-all-mainline-bcm283x-dt-files-for-i2c0-pin.patch
@@ -0,0 +1,201 @@
+From 393b01ee7330723b5f27b86d1b03bed88f8a8ffa Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson@raspberrypi.com>
+Date: Thu, 9 Apr 2020 17:26:13 +0100
+Subject: [PATCH] dt: Update all mainline bcm283x dt files for i2c0
+ pinctrl mux
+
+BSC0 (aka i2c0) can me muxed via pinctrl to GPIOs 0&1, 28&29, or
+44&45. These have different uses based on the platform (40pin header,
+and CSI/DSI connectors), so add a pinctrl I2C mux between the
+different options.
+
+Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
+---
+ arch/arm/boot/dts/bcm2835-rpi-a-plus.dts   |  5 +++++
+ arch/arm/boot/dts/bcm2835-rpi-a.dts        |  7 +++++++
+ arch/arm/boot/dts/bcm2835-rpi-b-plus.dts   |  5 +++++
+ arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts   |  7 +++++++
+ arch/arm/boot/dts/bcm2835-rpi-b.dts        |  7 +++++++
+ arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts  |  5 +++++
+ arch/arm/boot/dts/bcm2835-rpi-zero-w.dts   |  5 +++++
+ arch/arm/boot/dts/bcm2835-rpi-zero.dts     |  5 +++++
+ arch/arm/boot/dts/bcm2835-rpi.dtsi         | 10 +++++++---
+ arch/arm/boot/dts/bcm2836-rpi-2-b.dts      |  5 +++++
+ arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts |  5 +++++
+ arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts |  5 +++++
+ arch/arm/boot/dts/bcm2837-rpi-3-b.dts      |  5 +++++
+ arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts  |  5 +++++
+ 14 files changed, 78 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+@@ -126,3 +126,8 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++/* i2c on camera/display connector is gpio 28&29 */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio28>;
++};
+--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
+@@ -121,3 +121,10 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++/* i2c0 on camera/display connector is gpio 0&1. Not exposed on header.
++ * To avoid having to remap everything, map both ports to gpios 0&1
++ */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio0>;
++};
+--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+@@ -128,3 +128,8 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++/* i2c on camera/display connector is gpio 28&29 */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio28>;
++};
+--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+@@ -121,3 +121,10 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++/* i2c0 on camera/display connector is gpio 0&1. Not exposed on header.
++ * To avoid having to remap everything, map both ports to gpios 0&1
++ */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio0>;
++};
+--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
+@@ -116,3 +116,10 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++/* camera/display connector use BSC1 on GPIOS 2&3.
++ * To avoid having to remap everything, map both ports to gpios 0&1
++ */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio0>;
++};
+--- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
+@@ -95,3 +95,8 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++/* WHAT TO DO HERE? */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio28>;
++};
+--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+@@ -149,3 +149,8 @@
+ 	pinctrl-0 = <&uart1_gpio14>;
+ 	status = "okay";
+ };
++
++/* i2c on camera/display connector is gpio 28&29 */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio28>;
++};
+--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+@@ -117,3 +117,8 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++/* i2c on camera/display connector is gpio 28&29 */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio28>;
++};
+--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
+@@ -46,13 +46,17 @@
+ 	};
+ };
+ 
+-&i2c0 {
+-	pinctrl-names = "default";
+-	pinctrl-0 = <&i2c0_gpio0>;
++&i2c0if {
+ 	status = "okay";
+ 	clock-frequency = <100000>;
+ };
+ 
++&i2c0mux {
++	pinctrl-0 = <&i2c0_gpio0>;
++	/* pinctrl-1 varies based on platform */
++	status = "okay";
++};
++
+ &i2c1 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&i2c1_gpio2>;
+--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
++++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+@@ -128,3 +128,8 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++/* i2c on camera/display connector is gpio 28&29 */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio28>;
++};
+--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
++++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+@@ -176,3 +176,8 @@
+ 	pinctrl-0 = <&uart1_gpio14>;
+ 	status = "okay";
+ };
++
++/* i2c on camera/display connector is gpio 44&45 */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio44>;
++};
+--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+@@ -179,3 +179,8 @@
+ 	pinctrl-0 = <&uart1_gpio14>;
+ 	status = "okay";
+ };
++
++/* i2c on camera/display connector is gpio 44&45 */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio44>;
++};
+--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+@@ -174,3 +174,8 @@
+ 	status = "okay";
+ 	bus-width = <4>;
+ };
++
++/* i2c on camera/display connector is gpio 44&45 */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio44>;
++};
+--- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
++++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+@@ -94,3 +94,8 @@
+ 	pinctrl-0 = <&uart0_gpio14>;
+ 	status = "okay";
+ };
++
++/* WHAT TO DO HERE? */
++&i2c0mux {
++	pinctrl-1 = <&i2c0_gpio28>;
++};