aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.4/950-0515-i2c-brcmstb-Support-BCM2711-HDMI-BSC-controllers.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0515-i2c-brcmstb-Support-BCM2711-HDMI-BSC-controllers.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.4/950-0515-i2c-brcmstb-Support-BCM2711-HDMI-BSC-controllers.patch87
1 files changed, 87 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0515-i2c-brcmstb-Support-BCM2711-HDMI-BSC-controllers.patch b/target/linux/bcm27xx/patches-5.4/950-0515-i2c-brcmstb-Support-BCM2711-HDMI-BSC-controllers.patch
new file mode 100644
index 0000000000..76ce7403da
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.4/950-0515-i2c-brcmstb-Support-BCM2711-HDMI-BSC-controllers.patch
@@ -0,0 +1,87 @@
+From 4633a7bc5ffc15fe24c05e52f17a72c346baab6b Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime@cerno.tech>
+Date: Tue, 17 Dec 2019 09:58:34 +0100
+Subject: [PATCH] i2c: brcmstb: Support BCM2711 HDMI BSC controllers
+
+The HDMI blocks in the BCM2771 have an i2c controller to retrieve the
+EDID. This block is split into two parts, the BSC and the AUTO_I2C,
+lying in two separate register areas.
+
+The AUTO_I2C block has a mailbox-like interface and will take away the
+BSC control from the CPU if enabled. However, the BSC is the actually
+the same controller than the one supported by the brcmstb driver, and
+the AUTO_I2C doesn't really bring any immediate benefit.
+
+Let's use the BSC then, but let's also tie the AUTO_I2C registers with a
+separate compatible so that we can enable AUTO_I2C if needed in the
+future.
+
+The AUTO_I2C is enabled by default at boot though, so we first need to
+release the BSC from the AUTO_I2C control.
+
+Cc: Kamal Dasu <kdasu.kdev@gmail.com>
+Cc: Wolfram Sang <wsa@the-dreams.de>
+Cc: bcm-kernel-feedback-list@broadcom.com
+Cc: linux-i2c@vger.kernel.org
+Acked-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Maxime Ripard <maxime@cerno.tech>
+---
+ drivers/i2c/busses/i2c-brcmstb.c | 33 ++++++++++++++++++++++++++++++++
+ 1 file changed, 33 insertions(+)
+
+--- a/drivers/i2c/busses/i2c-brcmstb.c
++++ b/drivers/i2c/busses/i2c-brcmstb.c
+@@ -580,6 +580,31 @@ static void brcmstb_i2c_set_bsc_reg_defa
+ brcmstb_i2c_set_bus_speed(dev);
+ }
+
++#define AUTOI2C_CTRL0 0x26c
++#define AUTOI2C_CTRL0_RELEASE_BSC BIT(1)
++
++static int bcm2711_release_bsc(struct brcmstb_i2c_dev *dev)
++{
++ struct platform_device *pdev = to_platform_device(dev->device);
++ struct resource *iomem;
++ void __iomem *autoi2c;
++
++ /* Map hardware registers */
++ iomem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "auto-i2c");
++ autoi2c = devm_ioremap_resource(&pdev->dev, iomem);
++ if (IS_ERR(autoi2c))
++ return PTR_ERR(autoi2c);
++
++ writel(AUTOI2C_CTRL0_RELEASE_BSC, autoi2c + AUTOI2C_CTRL0);
++ devm_iounmap(&pdev->dev, autoi2c);
++
++ /* We need to reset the controller after the release */
++ dev->bsc_regmap->iic_enable = 0;
++ bsc_writel(dev, dev->bsc_regmap->iic_enable, iic_enable);
++
++ return 0;
++}
++
+ static int brcmstb_i2c_probe(struct platform_device *pdev)
+ {
+ int rc = 0;
+@@ -609,6 +634,13 @@ static int brcmstb_i2c_probe(struct plat
+ goto probe_errorout;
+ }
+
++ if (of_device_is_compatible(dev->device->of_node,
++ "brcm,bcm2711-hdmi-i2c")) {
++ rc = bcm2711_release_bsc(dev);
++ if (rc)
++ goto probe_errorout;
++ }
++
+ rc = of_property_read_string(dev->device->of_node, "interrupt-names",
+ &int_name);
+ if (rc < 0)
+@@ -705,6 +737,7 @@ static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm,
+ static const struct of_device_id brcmstb_i2c_of_match[] = {
+ {.compatible = "brcm,brcmstb-i2c"},
+ {.compatible = "brcm,brcmper-i2c"},
++ {.compatible = "brcm,bcm2711-hdmi-i2c"},
+ {},
+ };
+ MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match);