diff options
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0455-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch')
-rw-r--r-- | target/linux/bcm27xx/patches-5.4/950-0455-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch | 810 |
1 files changed, 810 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0455-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch b/target/linux/bcm27xx/patches-5.4/950-0455-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch new file mode 100644 index 0000000000..ca97a1966e --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0455-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch @@ -0,0 +1,810 @@ +From 4d9470c29736bf81bdb0d21da24cf350b1e99402 Mon Sep 17 00:00:00 2001 +From: Jim Quinlan <james.quinlan@broadcom.com> +Date: Mon, 16 Dec 2019 12:01:09 +0100 +Subject: [PATCH] PCI: brcmstb: Add Broadcom STB PCIe host controller + driver + +commit c0452137034bda8f686dd9a2e167949bfffd6776 upstream. + +This adds a basic driver for Broadcom's STB PCIe controller, for now +aimed at Raspberry Pi 4's SoC, bcm2711. + +Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> +Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> +Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> +[lorenzo.pieralisi@arm.com: updated brcm_pcie_get_rc_bar2_size_and_offset()according to https://lore.kernel.org/linux-pci/be8ddb33a7360af1815cf686f77f3f0913d02be3.camel@suse.de] +Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> +Reviewed-by: Andrew Murray <andrew.murray@arm.com> +Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> +--- + drivers/pci/controller/Kconfig | 8 + + drivers/pci/controller/Makefile | 1 + + drivers/pci/controller/pcie-brcmstb.c | 755 ++++++++++++++++++++++++++ + 3 files changed, 764 insertions(+) + create mode 100644 drivers/pci/controller/pcie-brcmstb.c + +--- a/drivers/pci/controller/Kconfig ++++ b/drivers/pci/controller/Kconfig +@@ -281,6 +281,14 @@ config VMD + To compile this driver as a module, choose M here: the + module will be called vmd. + ++config PCIE_BRCMSTB ++ tristate "Broadcom Brcmstb PCIe host controller" ++ depends on ARCH_BCM2835 || COMPILE_TEST ++ depends on OF ++ help ++ Say Y here to enable PCIe host controller support for ++ Broadcom STB based SoCs, like the Raspberry Pi 4. ++ + config PCI_HYPERV_INTERFACE + tristate "Hyper-V PCI Interface" + depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64 +--- a/drivers/pci/controller/Makefile ++++ b/drivers/pci/controller/Makefile +@@ -30,6 +30,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-medi + obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o + obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o + obj-$(CONFIG_VMD) += vmd.o ++obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o + # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW + obj-y += dwc/ + +--- /dev/null ++++ b/drivers/pci/controller/pcie-brcmstb.c +@@ -0,0 +1,755 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* Copyright (C) 2009 - 2019 Broadcom */ ++ ++#include <linux/bitfield.h> ++#include <linux/clk.h> ++#include <linux/compiler.h> ++#include <linux/delay.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/io.h> ++#include <linux/ioport.h> ++#include <linux/irqdomain.h> ++#include <linux/kernel.h> ++#include <linux/list.h> ++#include <linux/log2.h> ++#include <linux/module.h> ++#include <linux/of_address.h> ++#include <linux/of_irq.h> ++#include <linux/of_pci.h> ++#include <linux/of_platform.h> ++#include <linux/pci.h> ++#include <linux/printk.h> ++#include <linux/sizes.h> ++#include <linux/slab.h> ++#include <linux/string.h> ++#include <linux/types.h> ++ ++#include "../pci.h" ++ ++/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ ++#define BRCM_PCIE_CAP_REGS 0x00ac ++ ++/* Broadcom STB PCIe Register Offsets */ ++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1 0x0188 ++#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc ++#define PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN 0x0 ++ ++#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c ++#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff ++ ++#define PCIE_RC_DL_MDIO_ADDR 0x1100 ++#define PCIE_RC_DL_MDIO_WR_DATA 0x1104 ++#define PCIE_RC_DL_MDIO_RD_DATA 0x1108 ++ ++#define PCIE_MISC_MISC_CTRL 0x4008 ++#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000 ++#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000 ++#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000 ++#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128 0x0 ++#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK 0xf8000000 ++ ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c ++#define PCIE_MEM_WIN0_LO(win) \ ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 4) ++ ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010 ++#define PCIE_MEM_WIN0_HI(win) \ ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 4) ++ ++#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c ++#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f ++ ++#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034 ++#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f ++#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038 ++ ++#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c ++#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f ++ ++#define PCIE_MISC_PCIE_CTRL 0x4064 ++#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1 ++ ++#define PCIE_MISC_PCIE_STATUS 0x4068 ++#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80 ++#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK 0x20 ++#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK 0x10 ++#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK 0x40 ++ ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0 ++#define PCIE_MEM_WIN0_BASE_LIMIT(win) \ ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT + ((win) * 4) ++ ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK 0xff ++#define PCIE_MEM_WIN0_BASE_HI(win) \ ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI + ((win) * 8) ++ ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084 ++#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff ++#define PCIE_MEM_WIN0_LIMIT_HI(win) \ ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8) ++ ++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204 ++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2 ++#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000 ++ ++#define PCIE_MSI_INTR2_STATUS 0x4500 ++#define PCIE_MSI_INTR2_CLR 0x4508 ++#define PCIE_MSI_INTR2_MASK_SET 0x4510 ++#define PCIE_MSI_INTR2_MASK_CLR 0x4514 ++ ++#define PCIE_EXT_CFG_DATA 0x8000 ++ ++#define PCIE_EXT_CFG_INDEX 0x9000 ++#define PCIE_EXT_BUSNUM_SHIFT 20 ++#define PCIE_EXT_SLOT_SHIFT 15 ++#define PCIE_EXT_FUNC_SHIFT 12 ++ ++#define PCIE_RGR1_SW_INIT_1 0x9210 ++#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1 ++#define PCIE_RGR1_SW_INIT_1_INIT_MASK 0x2 ++ ++/* PCIe parameters */ ++#define BRCM_NUM_PCIE_OUT_WINS 0x4 ++ ++/* MDIO registers */ ++#define MDIO_PORT0 0x0 ++#define MDIO_DATA_MASK 0x7fffffff ++#define MDIO_PORT_MASK 0xf0000 ++#define MDIO_REGAD_MASK 0xffff ++#define MDIO_CMD_MASK 0xfff00000 ++#define MDIO_CMD_READ 0x1 ++#define MDIO_CMD_WRITE 0x0 ++#define MDIO_DATA_DONE_MASK 0x80000000 ++#define MDIO_RD_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 1 : 0) ++#define MDIO_WT_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 0 : 1) ++#define SSC_REGS_ADDR 0x1100 ++#define SET_ADDR_OFFSET 0x1f ++#define SSC_CNTL_OFFSET 0x2 ++#define SSC_CNTL_OVRD_EN_MASK 0x8000 ++#define SSC_CNTL_OVRD_VAL_MASK 0x4000 ++#define SSC_STATUS_OFFSET 0x1 ++#define SSC_STATUS_SSC_MASK 0x400 ++#define SSC_STATUS_PLL_LOCK_MASK 0x800 ++ ++/* Internal PCIe Host Controller Information.*/ ++struct brcm_pcie { ++ struct device *dev; ++ void __iomem *base; ++ struct clk *clk; ++ struct pci_bus *root_bus; ++ struct device_node *np; ++ bool ssc; ++ int gen; ++}; ++ ++/* ++ * This is to convert the size of the inbound "BAR" region to the ++ * non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE ++ */ ++static int brcm_pcie_encode_ibar_size(u64 size) ++{ ++ int log2_in = ilog2(size); ++ ++ if (log2_in >= 12 && log2_in <= 15) ++ /* Covers 4KB to 32KB (inclusive) */ ++ return (log2_in - 12) + 0x1c; ++ else if (log2_in >= 16 && log2_in <= 35) ++ /* Covers 64KB to 32GB, (inclusive) */ ++ return log2_in - 15; ++ /* Something is awry so disable */ ++ return 0; ++} ++ ++static u32 brcm_pcie_mdio_form_pkt(int port, int regad, int cmd) ++{ ++ u32 pkt = 0; ++ ++ pkt |= FIELD_PREP(MDIO_PORT_MASK, port); ++ pkt |= FIELD_PREP(MDIO_REGAD_MASK, regad); ++ pkt |= FIELD_PREP(MDIO_CMD_MASK, cmd); ++ ++ return pkt; ++} ++ ++/* negative return value indicates error */ ++static int brcm_pcie_mdio_read(void __iomem *base, u8 port, u8 regad, u32 *val) ++{ ++ int tries; ++ u32 data; ++ ++ writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_READ), ++ base + PCIE_RC_DL_MDIO_ADDR); ++ readl(base + PCIE_RC_DL_MDIO_ADDR); ++ ++ data = readl(base + PCIE_RC_DL_MDIO_RD_DATA); ++ for (tries = 0; !MDIO_RD_DONE(data) && tries < 10; tries++) { ++ udelay(10); ++ data = readl(base + PCIE_RC_DL_MDIO_RD_DATA); ++ } ++ ++ *val = FIELD_GET(MDIO_DATA_MASK, data); ++ return MDIO_RD_DONE(data) ? 0 : -EIO; ++} ++ ++/* negative return value indicates error */ ++static int brcm_pcie_mdio_write(void __iomem *base, u8 port, ++ u8 regad, u16 wrdata) ++{ ++ int tries; ++ u32 data; ++ ++ writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_WRITE), ++ base + PCIE_RC_DL_MDIO_ADDR); ++ readl(base + PCIE_RC_DL_MDIO_ADDR); ++ writel(MDIO_DATA_DONE_MASK | wrdata, base + PCIE_RC_DL_MDIO_WR_DATA); ++ ++ data = readl(base + PCIE_RC_DL_MDIO_WR_DATA); ++ for (tries = 0; !MDIO_WT_DONE(data) && tries < 10; tries++) { ++ udelay(10); ++ data = readl(base + PCIE_RC_DL_MDIO_WR_DATA); ++ } ++ ++ return MDIO_WT_DONE(data) ? 0 : -EIO; ++} ++ ++/* ++ * Configures device for Spread Spectrum Clocking (SSC) mode; a negative ++ * return value indicates error. ++ */ ++static int brcm_pcie_set_ssc(struct brcm_pcie *pcie) ++{ ++ int pll, ssc; ++ int ret; ++ u32 tmp; ++ ++ ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0, SET_ADDR_OFFSET, ++ SSC_REGS_ADDR); ++ if (ret < 0) ++ return ret; ++ ++ ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0, ++ SSC_CNTL_OFFSET, &tmp); ++ if (ret < 0) ++ return ret; ++ ++ u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_EN_MASK); ++ u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_VAL_MASK); ++ ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0, ++ SSC_CNTL_OFFSET, tmp); ++ if (ret < 0) ++ return ret; ++ ++ usleep_range(1000, 2000); ++ ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0, ++ SSC_STATUS_OFFSET, &tmp); ++ if (ret < 0) ++ return ret; ++ ++ ssc = FIELD_GET(SSC_STATUS_SSC_MASK, tmp); ++ pll = FIELD_GET(SSC_STATUS_PLL_LOCK_MASK, tmp); ++ ++ return ssc && pll ? 0 : -EIO; ++} ++ ++/* Limits operation to a specific generation (1, 2, or 3) */ ++static void brcm_pcie_set_gen(struct brcm_pcie *pcie, int gen) ++{ ++ u16 lnkctl2 = readw(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2); ++ u32 lnkcap = readl(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP); ++ ++ lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen; ++ writel(lnkcap, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP); ++ ++ lnkctl2 = (lnkctl2 & ~0xf) | gen; ++ writew(lnkctl2, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2); ++} ++ ++static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie, ++ unsigned int win, u64 cpu_addr, ++ u64 pcie_addr, u64 size) ++{ ++ u32 cpu_addr_mb_high, limit_addr_mb_high; ++ phys_addr_t cpu_addr_mb, limit_addr_mb; ++ int high_addr_shift; ++ u32 tmp; ++ ++ /* Set the base of the pcie_addr window */ ++ writel(lower_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_LO(win)); ++ writel(upper_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_HI(win)); ++ ++ /* Write the addr base & limit lower bits (in MBs) */ ++ cpu_addr_mb = cpu_addr / SZ_1M; ++ limit_addr_mb = (cpu_addr + size - 1) / SZ_1M; ++ ++ tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win)); ++ u32p_replace_bits(&tmp, cpu_addr_mb, ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK); ++ u32p_replace_bits(&tmp, limit_addr_mb, ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK); ++ writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win)); ++ ++ /* Write the cpu & limit addr upper bits */ ++ high_addr_shift = ++ HWEIGHT32(PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK); ++ ++ cpu_addr_mb_high = cpu_addr_mb >> high_addr_shift; ++ tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_HI(win)); ++ u32p_replace_bits(&tmp, cpu_addr_mb_high, ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK); ++ writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_HI(win)); ++ ++ limit_addr_mb_high = limit_addr_mb >> high_addr_shift; ++ tmp = readl(pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win)); ++ u32p_replace_bits(&tmp, limit_addr_mb_high, ++ PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK); ++ writel(tmp, pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win)); ++} ++ ++/* The controller is capable of serving in both RC and EP roles */ ++static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie) ++{ ++ void __iomem *base = pcie->base; ++ u32 val = readl(base + PCIE_MISC_PCIE_STATUS); ++ ++ return !!FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK, val); ++} ++ ++static bool brcm_pcie_link_up(struct brcm_pcie *pcie) ++{ ++ u32 val = readl(pcie->base + PCIE_MISC_PCIE_STATUS); ++ u32 dla = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK, val); ++ u32 plu = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK, val); ++ ++ return dla && plu; ++} ++ ++/* Configuration space read/write support */ ++static inline int brcm_pcie_cfg_index(int busnr, int devfn, int reg) ++{ ++ return ((PCI_SLOT(devfn) & 0x1f) << PCIE_EXT_SLOT_SHIFT) ++ | ((PCI_FUNC(devfn) & 0x07) << PCIE_EXT_FUNC_SHIFT) ++ | (busnr << PCIE_EXT_BUSNUM_SHIFT) ++ | (reg & ~3); ++} ++ ++static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn, ++ int where) ++{ ++ struct brcm_pcie *pcie = bus->sysdata; ++ void __iomem *base = pcie->base; ++ int idx; ++ ++ /* Accesses to the RC go right to the RC registers if slot==0 */ ++ if (pci_is_root_bus(bus)) ++ return PCI_SLOT(devfn) ? NULL : base + where; ++ ++ /* For devices, write to the config space index register */ ++ idx = brcm_pcie_cfg_index(bus->number, devfn, 0); ++ writel(idx, pcie->base + PCIE_EXT_CFG_INDEX); ++ return base + PCIE_EXT_CFG_DATA + where; ++} ++ ++static struct pci_ops brcm_pcie_ops = { ++ .map_bus = brcm_pcie_map_conf, ++ .read = pci_generic_config_read, ++ .write = pci_generic_config_write, ++}; ++ ++static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, u32 val) ++{ ++ u32 tmp; ++ ++ tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1); ++ u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_INIT_MASK); ++ writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1); ++} ++ ++static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, u32 val) ++{ ++ u32 tmp; ++ ++ tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1); ++ u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK); ++ writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1); ++} ++ ++static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie, ++ u64 *rc_bar2_size, ++ u64 *rc_bar2_offset) ++{ ++ struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); ++ struct device *dev = pcie->dev; ++ struct resource_entry *entry; ++ ++ entry = resource_list_first_type(&bridge->dma_ranges, IORESOURCE_MEM); ++ if (!entry) ++ return -ENODEV; ++ ++ ++ /* ++ * The controller expects the inbound window offset to be calculated as ++ * the difference between PCIe's address space and CPU's. The offset ++ * provided by the firmware is calculated the opposite way, so we ++ * negate it. ++ */ ++ *rc_bar2_offset = -entry->offset; ++ *rc_bar2_size = 1ULL << fls64(entry->res->end - entry->res->start); ++ ++ /* ++ * We validate the inbound memory view even though we should trust ++ * whatever the device-tree provides. This is because of an HW issue on ++ * early Raspberry Pi 4's revisions (bcm2711). It turns out its ++ * firmware has to dynamically edit dma-ranges due to a bug on the ++ * PCIe controller integration, which prohibits any access above the ++ * lower 3GB of memory. Given this, we decided to keep the dma-ranges ++ * in check, avoiding hard to debug device-tree related issues in the ++ * future: ++ * ++ * The PCIe host controller by design must set the inbound viewport to ++ * be a contiguous arrangement of all of the system's memory. In ++ * addition, its size mut be a power of two. To further complicate ++ * matters, the viewport must start on a pcie-address that is aligned ++ * on a multiple of its size. If a portion of the viewport does not ++ * represent system memory -- e.g. 3GB of memory requires a 4GB ++ * viewport -- we can map the outbound memory in or after 3GB and even ++ * though the viewport will overlap the outbound memory the controller ++ * will know to send outbound memory downstream and everything else ++ * upstream. ++ * ++ * For example: ++ * ++ * - The best-case scenario, memory up to 3GB, is to place the inbound ++ * region in the first 4GB of pcie-space, as some legacy devices can ++ * only address 32bits. We would also like to put the MSI under 4GB ++ * as well, since some devices require a 32bit MSI target address. ++ * ++ * - If the system memory is 4GB or larger we cannot start the inbound ++ * region at location 0 (since we have to allow some space for ++ * outbound memory @ 3GB). So instead it will start at the 1x ++ * multiple of its size ++ */ ++ if (!*rc_bar2_size || *rc_bar2_offset % *rc_bar2_size || ++ (*rc_bar2_offset < SZ_4G && *rc_bar2_offset > SZ_2G)) { ++ dev_err(dev, "Invalid rc_bar2_offset/size: size 0x%llx, off 0x%llx\n", ++ *rc_bar2_size, *rc_bar2_offset); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int brcm_pcie_setup(struct brcm_pcie *pcie) ++{ ++ struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); ++ u64 rc_bar2_offset, rc_bar2_size; ++ void __iomem *base = pcie->base; ++ struct device *dev = pcie->dev; ++ struct resource_entry *entry; ++ unsigned int scb_size_val; ++ bool ssc_good = false; ++ struct resource *res; ++ int num_out_wins = 0; ++ u16 nlw, cls, lnksta; ++ int i, ret; ++ u32 tmp; ++ ++ /* Reset the bridge */ ++ brcm_pcie_bridge_sw_init_set(pcie, 1); ++ ++ usleep_range(100, 200); ++ ++ /* Take the bridge out of reset */ ++ brcm_pcie_bridge_sw_init_set(pcie, 0); ++ ++ tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); ++ tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK; ++ writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); ++ /* Wait for SerDes to be stable */ ++ usleep_range(100, 200); ++ ++ /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */ ++ u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK); ++ u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK); ++ u32p_replace_bits(&tmp, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128, ++ PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK); ++ writel(tmp, base + PCIE_MISC_MISC_CTRL); ++ ++ ret = brcm_pcie_get_rc_bar2_size_and_offset(pcie, &rc_bar2_size, ++ &rc_bar2_offset); ++ if (ret) ++ return ret; ++ ++ tmp = lower_32_bits(rc_bar2_offset); ++ u32p_replace_bits(&tmp, brcm_pcie_encode_ibar_size(rc_bar2_size), ++ PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK); ++ writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO); ++ writel(upper_32_bits(rc_bar2_offset), ++ base + PCIE_MISC_RC_BAR2_CONFIG_HI); ++ ++ scb_size_val = rc_bar2_size ? ++ ilog2(rc_bar2_size) - 15 : 0xf; /* 0xf is 1GB */ ++ tmp = readl(base + PCIE_MISC_MISC_CTRL); ++ u32p_replace_bits(&tmp, scb_size_val, ++ PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK); ++ writel(tmp, base + PCIE_MISC_MISC_CTRL); ++ ++ /* disable the PCIe->GISB memory window (RC_BAR1) */ ++ tmp = readl(base + PCIE_MISC_RC_BAR1_CONFIG_LO); ++ tmp &= ~PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK; ++ writel(tmp, base + PCIE_MISC_RC_BAR1_CONFIG_LO); ++ ++ /* disable the PCIe->SCB memory window (RC_BAR3) */ ++ tmp = readl(base + PCIE_MISC_RC_BAR3_CONFIG_LO); ++ tmp &= ~PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK; ++ writel(tmp, base + PCIE_MISC_RC_BAR3_CONFIG_LO); ++ ++ /* Mask all interrupts since we are not handling any yet */ ++ writel(0xffffffff, pcie->base + PCIE_MSI_INTR2_MASK_SET); ++ ++ /* clear any interrupts we find on boot */ ++ writel(0xffffffff, pcie->base + PCIE_MSI_INTR2_CLR); ++ ++ if (pcie->gen) ++ brcm_pcie_set_gen(pcie, pcie->gen); ++ ++ /* Unassert the fundamental reset */ ++ brcm_pcie_perst_set(pcie, 0); ++ ++ /* ++ * Give the RC/EP time to wake up, before trying to configure RC. ++ * Intermittently check status for link-up, up to a total of 100ms. ++ */ ++ for (i = 0; i < 100 && !brcm_pcie_link_up(pcie); i += 5) ++ msleep(5); ++ ++ if (!brcm_pcie_link_up(pcie)) { ++ dev_err(dev, "link down\n"); ++ return -ENODEV; ++ } ++ ++ if (!brcm_pcie_rc_mode(pcie)) { ++ dev_err(dev, "PCIe misconfigured; is in EP mode\n"); ++ return -EINVAL; ++ } ++ ++ resource_list_for_each_entry(entry, &bridge->windows) { ++ res = entry->res; ++ ++ if (resource_type(res) != IORESOURCE_MEM) ++ continue; ++ ++ if (num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) { ++ dev_err(pcie->dev, "too many outbound wins\n"); ++ return -EINVAL; ++ } ++ ++ brcm_pcie_set_outbound_win(pcie, num_out_wins, res->start, ++ res->start - entry->offset, ++ resource_size(res)); ++ num_out_wins++; ++ } ++ ++ /* ++ * For config space accesses on the RC, show the right class for ++ * a PCIe-PCIe bridge (the default setting is to be EP mode). ++ */ ++ tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3); ++ u32p_replace_bits(&tmp, 0x060400, ++ PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK); ++ writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3); ++ ++ if (pcie->ssc) { ++ ret = brcm_pcie_set_ssc(pcie); ++ if (ret == 0) ++ ssc_good = true; ++ else ++ dev_err(dev, "failed attempt to enter ssc mode\n"); ++ } ++ ++ lnksta = readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA); ++ cls = FIELD_GET(PCI_EXP_LNKSTA_CLS, lnksta); ++ nlw = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta); ++ dev_info(dev, "link up, %s x%u %s\n", ++ PCIE_SPEED2STR(cls + PCI_SPEED_133MHz_PCIX_533), ++ nlw, ssc_good ? "(SSC)" : "(!SSC)"); ++ ++ /* PCIe->SCB endian mode for BAR */ ++ tmp = readl(base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1); ++ u32p_replace_bits(&tmp, PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN, ++ PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK); ++ writel(tmp, base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1); ++ ++ /* ++ * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1 ++ * is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1. ++ */ ++ tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); ++ tmp |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK; ++ writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); ++ ++ return 0; ++} ++ ++/* L23 is a low-power PCIe link state */ ++static void brcm_pcie_enter_l23(struct brcm_pcie *pcie) ++{ ++ void __iomem *base = pcie->base; ++ int l23, i; ++ u32 tmp; ++ ++ /* Assert request for L23 */ ++ tmp = readl(base + PCIE_MISC_PCIE_CTRL); ++ u32p_replace_bits(&tmp, 1, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK); ++ writel(tmp, base + PCIE_MISC_PCIE_CTRL); ++ ++ /* Wait up to 36 msec for L23 */ ++ tmp = readl(base + PCIE_MISC_PCIE_STATUS); ++ l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK, tmp); ++ for (i = 0; i < 15 && !l23; i++) { ++ usleep_range(2000, 2400); ++ tmp = readl(base + PCIE_MISC_PCIE_STATUS); ++ l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK, ++ tmp); ++ } ++ ++ if (!l23) ++ dev_err(pcie->dev, "failed to enter low-power link state\n"); ++} ++ ++static void brcm_pcie_turn_off(struct brcm_pcie *pcie) ++{ ++ void __iomem *base = pcie->base; ++ int tmp; ++ ++ if (brcm_pcie_link_up(pcie)) ++ brcm_pcie_enter_l23(pcie); ++ /* Assert fundamental reset */ ++ brcm_pcie_perst_set(pcie, 1); ++ ++ /* Deassert request for L23 in case it was asserted */ ++ tmp = readl(base + PCIE_MISC_PCIE_CTRL); ++ u32p_replace_bits(&tmp, 0, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK); ++ writel(tmp, base + PCIE_MISC_PCIE_CTRL); ++ ++ /* Turn off SerDes */ ++ tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); ++ u32p_replace_bits(&tmp, 1, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK); ++ writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); ++ ++ /* Shutdown PCIe bridge */ ++ brcm_pcie_bridge_sw_init_set(pcie, 1); ++} ++ ++static void __brcm_pcie_remove(struct brcm_pcie *pcie) ++{ ++ brcm_pcie_turn_off(pcie); ++ clk_disable_unprepare(pcie->clk); ++ clk_put(pcie->clk); ++} ++ ++static int brcm_pcie_remove(struct platform_device *pdev) ++{ ++ struct brcm_pcie *pcie = platform_get_drvdata(pdev); ++ ++ pci_stop_root_bus(pcie->root_bus); ++ pci_remove_root_bus(pcie->root_bus); ++ __brcm_pcie_remove(pcie); ++ ++ return 0; ++} ++ ++static int brcm_pcie_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct pci_host_bridge *bridge; ++ struct brcm_pcie *pcie; ++ struct pci_bus *child; ++ struct resource *res; ++ int ret; ++ ++ bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); ++ if (!bridge) ++ return -ENOMEM; ++ ++ pcie = pci_host_bridge_priv(bridge); ++ pcie->dev = &pdev->dev; ++ pcie->np = np; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ pcie->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(pcie->base)) ++ return PTR_ERR(pcie->base); ++ ++ pcie->clk = devm_clk_get_optional(&pdev->dev, "sw_pcie"); ++ if (IS_ERR(pcie->clk)) ++ return PTR_ERR(pcie->clk); ++ ++ ret = of_pci_get_max_link_speed(np); ++ pcie->gen = (ret < 0) ? 0 : ret; ++ ++ pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc"); ++ ++ ret = pci_parse_request_of_pci_ranges(pcie->dev, &bridge->windows, ++ &bridge->dma_ranges, NULL); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(pcie->clk); ++ if (ret) { ++ dev_err(&pdev->dev, "could not enable clock\n"); ++ return ret; ++ } ++ ++ ret = brcm_pcie_setup(pcie); ++ if (ret) ++ goto fail; ++ ++ bridge->dev.parent = &pdev->dev; ++ bridge->busnr = 0; ++ bridge->ops = &brcm_pcie_ops; ++ bridge->sysdata = pcie; ++ bridge->map_irq = of_irq_parse_and_map_pci; ++ bridge->swizzle_irq = pci_common_swizzle; ++ ++ ret = pci_scan_root_bus_bridge(bridge); ++ if (ret < 0) { ++ dev_err(pcie->dev, "Scanning root bridge failed\n"); ++ goto fail; ++ } ++ ++ pci_assign_unassigned_bus_resources(bridge->bus); ++ list_for_each_entry(child, &bridge->bus->children, node) ++ pcie_bus_configure_settings(child); ++ pci_bus_add_devices(bridge->bus); ++ platform_set_drvdata(pdev, pcie); ++ pcie->root_bus = bridge->bus; ++ ++ return 0; ++fail: ++ __brcm_pcie_remove(pcie); ++ return ret; ++} ++ ++static const struct of_device_id brcm_pcie_match[] = { ++ { .compatible = "brcm,bcm2711-pcie" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, brcm_pcie_match); ++ ++static struct platform_driver brcm_pcie_driver = { ++ .probe = brcm_pcie_probe, ++ .remove = brcm_pcie_remove, ++ .driver = { ++ .name = "brcm-pcie", ++ .of_match_table = brcm_pcie_match, ++ }, ++}; ++module_platform_driver(brcm_pcie_driver); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Broadcom STB PCIe RC driver"); ++MODULE_AUTHOR("Broadcom"); |