diff options
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0415-ARM-dts-bcm2711-rpi-4-Enable-GENET-support.patch')
| -rw-r--r-- | target/linux/bcm27xx/patches-5.4/950-0415-ARM-dts-bcm2711-rpi-4-Enable-GENET-support.patch | 86 |
1 files changed, 0 insertions, 86 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0415-ARM-dts-bcm2711-rpi-4-Enable-GENET-support.patch b/target/linux/bcm27xx/patches-5.4/950-0415-ARM-dts-bcm2711-rpi-4-Enable-GENET-support.patch deleted file mode 100644 index e204859fbd..0000000000 --- a/target/linux/bcm27xx/patches-5.4/950-0415-ARM-dts-bcm2711-rpi-4-Enable-GENET-support.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 32847947e1d1e1ac2a73c7ea8ad47cca49aef5d4 Mon Sep 17 00:00:00 2001 -From: Stefan Wahren <wahrenst@gmx.net> -Date: Mon, 11 Nov 2019 20:49:26 +0100 -Subject: [PATCH] ARM: dts: bcm2711-rpi-4: Enable GENET support - -This enables the Gigabit Ethernet support on the Raspberry Pi 4. -The defined PHY mode is equivalent to the default register settings -in the downstream tree. - -Signed-off-by: Matthias Brugger <mbrugger@suse.com> -Signed-off-by: Stefan Wahren <wahrenst@gmx.net> -Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 17 +++++++++++++++++ - arch/arm/boot/dts/bcm2711.dtsi | 26 ++++++++++++++++++++++++++ - 2 files changed, 43 insertions(+) - ---- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -@@ -19,6 +19,10 @@ - reg = <0 0 0>; - }; - -+ aliases { -+ ethernet0 = &genet; -+ }; -+ - leds { - act { - gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; -@@ -97,6 +101,19 @@ - status = "okay"; - }; - -+&genet { -+ phy-handle = <&phy1>; -+ phy-mode = "rgmii-rxid"; -+ status = "okay"; -+}; -+ -+&genet_mdio { -+ phy1: ethernet-phy@1 { -+ /* No PHY interrupt */ -+ reg = <0x1>; -+ }; -+}; -+ - /* uart0 communicates with the BT module */ - &uart0 { - pinctrl-names = "default"; ---- a/arch/arm/boot/dts/bcm2711.dtsi -+++ b/arch/arm/boot/dts/bcm2711.dtsi -@@ -325,6 +325,32 @@ - cpu-release-addr = <0x0 0x000000f0>; - }; - }; -+ -+ scb { -+ compatible = "simple-bus"; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ -+ ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>; -+ -+ genet: ethernet@7d580000 { -+ compatible = "brcm,bcm2711-genet-v5"; -+ reg = <0x0 0x7d580000 0x10000>; -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; -+ status = "disabled"; -+ -+ genet_mdio: mdio@e14 { -+ compatible = "brcm,genet-mdio-v5"; -+ reg = <0xe14 0x8>; -+ reg-names = "mdio"; -+ #address-cells = <0x0>; -+ #size-cells = <0x1>; -+ }; -+ }; -+ }; - }; - - &clk_osc { |