aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.4/950-0413-ARM-dts-Add-minimal-Raspberry-Pi-4-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0413-ARM-dts-Add-minimal-Raspberry-Pi-4-support.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.4/950-0413-ARM-dts-Add-minimal-Raspberry-Pi-4-support.patch1024
1 files changed, 0 insertions, 1024 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0413-ARM-dts-Add-minimal-Raspberry-Pi-4-support.patch b/target/linux/bcm27xx/patches-5.4/950-0413-ARM-dts-Add-minimal-Raspberry-Pi-4-support.patch
deleted file mode 100644
index 15e4f53a0a..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0413-ARM-dts-Add-minimal-Raspberry-Pi-4-support.patch
+++ /dev/null
@@ -1,1024 +0,0 @@
-From 19a0ac654994661f63f7c9e099ed91a1210af161 Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <wahrenst@gmx.net>
-Date: Sun, 6 Oct 2019 15:41:25 +0200
-Subject: [PATCH] ARM: dts: Add minimal Raspberry Pi 4 support
-
-This adds minimal support for the new Raspberry Pi 4 without the
-fancy stuff like GENET, PCIe, xHCI, 40 bit DMA and V3D. The RPi 4 is
-available in 3 different variants (1, 2 and 4 GB RAM), so leave the memory
-size to zero and let the bootloader take care of it. The DWC2 is still
-usable as peripheral via the USB-C port.
-
-Other differences to the Raspberry Pi 3:
-- additional GIC 400 Interrupt controller
-- new thermal IP and HWRNG
-- additional MMC interface (emmc2)
-- additional UART, I2C, SPI and PWM interfaces
-- clock stretching bug in I2C IP has been fixed
-
-Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
-Acked-by: Eric Anholt <eric@anholt.net>
-Acked-by: Florian Fanelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 123 +++
- arch/arm/boot/dts/bcm2711.dtsi | 844 ++++++++++++++++++
- .../boot/dts/bcm283x-rpi-usb-peripheral.dtsi | 7 +
- 4 files changed, 975 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts
- create mode 100644 arch/arm/boot/dts/bcm2711.dtsi
- create mode 100644 arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -97,6 +97,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
- bcm2837-rpi-3-b.dtb \
- bcm2837-rpi-3-b-plus.dtb \
- bcm2837-rpi-cm3-io3.dtb \
-+ bcm2711-rpi-4-b.dtb \
- bcm2835-rpi-zero.dtb \
- bcm2835-rpi-zero-w.dtb
- dtb-$(CONFIG_ARCH_BCM_5301X) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
-@@ -0,0 +1,123 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/dts-v1/;
-+#include "bcm2711.dtsi"
-+#include "bcm2835-rpi.dtsi"
-+#include "bcm283x-rpi-usb-peripheral.dtsi"
-+
-+/ {
-+ compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
-+ model = "Raspberry Pi 4 Model B";
-+
-+ chosen {
-+ /* 8250 auxiliary UART instead of pl011 */
-+ stdout-path = "serial1:115200n8";
-+ };
-+
-+ /* Will be filled by the bootloader */
-+ memory@0 {
-+ device_type = "memory";
-+ reg = <0 0 0>;
-+ };
-+
-+ leds {
-+ act {
-+ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ pwr {
-+ label = "PWR";
-+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ wifi_pwrseq: wifi-pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ sd_io_1v8_reg: sd_io_1v8_reg {
-+ compatible = "regulator-gpio";
-+ regulator-name = "vdd-sd-io";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-settling-time-us = <5000>;
-+ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-+ states = <1800000 0x1
-+ 3300000 0x0>;
-+ status = "okay";
-+ };
-+};
-+
-+&firmware {
-+ expgpio: gpio {
-+ compatible = "raspberrypi,firmware-gpio";
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ gpio-line-names = "BT_ON",
-+ "WL_ON",
-+ "PWR_LED_OFF",
-+ "GLOBAL_RESET",
-+ "VDD_SD_IO_SEL",
-+ "CAM_GPIO",
-+ "",
-+ "";
-+ status = "okay";
-+ };
-+};
-+
-+&pwm1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
-+ status = "okay";
-+};
-+
-+/* SDHCI is used to control the SDIO for wireless */
-+&sdhci {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emmc_gpio34>;
-+ bus-width = <4>;
-+ non-removable;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ status = "okay";
-+
-+ brcmf: wifi@1 {
-+ reg = <1>;
-+ compatible = "brcm,bcm4329-fmac";
-+ };
-+};
-+
-+/* EMMC2 is used to drive the SD card */
-+&emmc2 {
-+ vqmmc-supply = <&sd_io_1v8_reg>;
-+ broken-cd;
-+ status = "okay";
-+};
-+
-+/* uart0 communicates with the BT module */
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
-+ uart-has-rtscts;
-+ status = "okay";
-+
-+ bluetooth {
-+ compatible = "brcm,bcm43438-bt";
-+ max-speed = <2000000>;
-+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-+ };
-+};
-+
-+/* uart1 is mapped to the pin header */
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart1_gpio14>;
-+ status = "okay";
-+};
-+
-+&vchiq {
-+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm2711.dtsi
-@@ -0,0 +1,844 @@
-+// SPDX-License-Identifier: GPL-2.0
-+#include "bcm283x.dtsi"
-+
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/soc/bcm2835-pm.h>
-+
-+/ {
-+ compatible = "brcm,bcm2711";
-+
-+ #address-cells = <2>;
-+ #size-cells = <1>;
-+
-+ interrupt-parent = <&gicv2>;
-+
-+ soc {
-+ /*
-+ * Defined ranges:
-+ * Common BCM283x peripherals
-+ * BCM2711-specific peripherals
-+ * ARM-local peripherals
-+ */
-+ ranges = <0x7e000000 0x0 0xfe000000 0x01800000>,
-+ <0x7c000000 0x0 0xfc000000 0x02000000>,
-+ <0x40000000 0x0 0xff800000 0x00800000>;
-+ /* Emulate a contiguous 30-bit address range for DMA */
-+ dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>;
-+
-+ /*
-+ * This node is the provider for the enable-method for
-+ * bringing up secondary cores.
-+ */
-+ local_intc: local_intc@40000000 {
-+ compatible = "brcm,bcm2836-l1-intc";
-+ reg = <0x40000000 0x100>;
-+ };
-+
-+ gicv2: interrupt-controller@40041000 {
-+ interrupt-controller;
-+ #interrupt-cells = <3>;
-+ compatible = "arm,gic-400";
-+ reg = <0x40041000 0x1000>,
-+ <0x40042000 0x2000>,
-+ <0x40044000 0x2000>,
-+ <0x40046000 0x2000>;
-+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-+ IRQ_TYPE_LEVEL_HIGH)>;
-+ };
-+
-+ dma: dma@7e007000 {
-+ compatible = "brcm,bcm2835-dma";
-+ reg = <0x7e007000 0xb00>;
-+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-+ /* DMA lite 7 - 10 */
-+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "dma0",
-+ "dma1",
-+ "dma2",
-+ "dma3",
-+ "dma4",
-+ "dma5",
-+ "dma6",
-+ "dma7",
-+ "dma8",
-+ "dma9",
-+ "dma10";
-+ #dma-cells = <1>;
-+ brcm,dma-channel-mask = <0x07f5>;
-+ };
-+
-+ pm: watchdog@7e100000 {
-+ compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
-+ #power-domain-cells = <1>;
-+ #reset-cells = <1>;
-+ reg = <0x7e100000 0x114>,
-+ <0x7e00a000 0x24>,
-+ <0x7ec11000 0x20>;
-+ clocks = <&clocks BCM2835_CLOCK_V3D>,
-+ <&clocks BCM2835_CLOCK_PERI_IMAGE>,
-+ <&clocks BCM2835_CLOCK_H264>,
-+ <&clocks BCM2835_CLOCK_ISP>;
-+ clock-names = "v3d", "peri_image", "h264", "isp";
-+ system-power-controller;
-+ };
-+
-+ rng@7e104000 {
-+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ /* RNG is incompatible with brcm,bcm2835-rng */
-+ status = "disabled";
-+ };
-+
-+ uart2: serial@7e201400 {
-+ compatible = "arm,pl011", "arm,primecell";
-+ reg = <0x7e201400 0x200>;
-+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2835_CLOCK_UART>,
-+ <&clocks BCM2835_CLOCK_VPU>;
-+ clock-names = "uartclk", "apb_pclk";
-+ arm,primecell-periphid = <0x00241011>;
-+ status = "disabled";
-+ };
-+
-+ uart3: serial@7e201600 {
-+ compatible = "arm,pl011", "arm,primecell";
-+ reg = <0x7e201600 0x200>;
-+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2835_CLOCK_UART>,
-+ <&clocks BCM2835_CLOCK_VPU>;
-+ clock-names = "uartclk", "apb_pclk";
-+ arm,primecell-periphid = <0x00241011>;
-+ status = "disabled";
-+ };
-+
-+ uart4: serial@7e201800 {
-+ compatible = "arm,pl011", "arm,primecell";
-+ reg = <0x7e201800 0x200>;
-+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2835_CLOCK_UART>,
-+ <&clocks BCM2835_CLOCK_VPU>;
-+ clock-names = "uartclk", "apb_pclk";
-+ arm,primecell-periphid = <0x00241011>;
-+ status = "disabled";
-+ };
-+
-+ uart5: serial@7e201a00 {
-+ compatible = "arm,pl011", "arm,primecell";
-+ reg = <0x7e201a00 0x200>;
-+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2835_CLOCK_UART>,
-+ <&clocks BCM2835_CLOCK_VPU>;
-+ clock-names = "uartclk", "apb_pclk";
-+ arm,primecell-periphid = <0x00241011>;
-+ status = "disabled";
-+ };
-+
-+ spi3: spi@7e204600 {
-+ compatible = "brcm,bcm2835-spi";
-+ reg = <0x7e204600 0x0200>;
-+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2835_CLOCK_VPU>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ spi4: spi@7e204800 {
-+ compatible = "brcm,bcm2835-spi";
-+ reg = <0x7e204800 0x0200>;
-+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2835_CLOCK_VPU>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ spi5: spi@7e204a00 {
-+ compatible = "brcm,bcm2835-spi";
-+ reg = <0x7e204a00 0x0200>;
-+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2835_CLOCK_VPU>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ spi6: spi@7e204c00 {
-+ compatible = "brcm,bcm2835-spi";
-+ reg = <0x7e204c00 0x0200>;
-+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2835_CLOCK_VPU>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ i2c3: i2c@7e205600 {
-+ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-+ reg = <0x7e205600 0x200>;
-+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2835_CLOCK_VPU>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ i2c4: i2c@7e205800 {
-+ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-+ reg = <0x7e205800 0x200>;
-+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2835_CLOCK_VPU>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ i2c5: i2c@7e205a00 {
-+ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-+ reg = <0x7e205a00 0x200>;
-+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2835_CLOCK_VPU>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ i2c6: i2c@7e205c00 {
-+ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-+ reg = <0x7e205c00 0x200>;
-+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2835_CLOCK_VPU>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
-+ pwm1: pwm@7e20c800 {
-+ compatible = "brcm,bcm2835-pwm";
-+ reg = <0x7e20c800 0x28>;
-+ clocks = <&clocks BCM2835_CLOCK_PWM>;
-+ assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
-+ assigned-clock-rates = <10000000>;
-+ #pwm-cells = <2>;
-+ status = "disabled";
-+ };
-+
-+ emmc2: emmc2@7e340000 {
-+ compatible = "brcm,bcm2711-emmc2";
-+ reg = <0x7e340000 0x100>;
-+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&clocks BCM2711_CLOCK_EMMC2>;
-+ status = "disabled";
-+ };
-+
-+ hvs@7e400000 {
-+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+ };
-+
-+ arm-pmu {
-+ compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
-+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-+ };
-+
-+ timer {
-+ compatible = "arm,armv8-timer";
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
-+ IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
-+ IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
-+ IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
-+ IRQ_TYPE_LEVEL_LOW)>;
-+ /* This only applies to the ARMv7 stub */
-+ arm,cpu-registers-not-fw-configured;
-+ };
-+
-+ cpus: cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
-+
-+ cpu0: cpu@0 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a72";
-+ reg = <0>;
-+ enable-method = "spin-table";
-+ cpu-release-addr = <0x0 0x000000d8>;
-+ };
-+
-+ cpu1: cpu@1 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a72";
-+ reg = <1>;
-+ enable-method = "spin-table";
-+ cpu-release-addr = <0x0 0x000000e0>;
-+ };
-+
-+ cpu2: cpu@2 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a72";
-+ reg = <2>;
-+ enable-method = "spin-table";
-+ cpu-release-addr = <0x0 0x000000e8>;
-+ };
-+
-+ cpu3: cpu@3 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a72";
-+ reg = <3>;
-+ enable-method = "spin-table";
-+ cpu-release-addr = <0x0 0x000000f0>;
-+ };
-+ };
-+};
-+
-+&clk_osc {
-+ clock-frequency = <54000000>;
-+};
-+
-+&clocks {
-+ compatible = "brcm,bcm2711-cprman";
-+};
-+
-+&cpu_thermal {
-+ coefficients = <(-487) 410040>;
-+};
-+
-+&dsi0 {
-+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&dsi1 {
-+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&gpio {
-+ compatible = "brcm,bcm2711-gpio";
-+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ gpclk0_gpio49: gpclk0_gpio49 {
-+ pin-gpclk {
-+ pins = "gpio49";
-+ function = "alt1";
-+ bias-disable;
-+ };
-+ };
-+ gpclk1_gpio50: gpclk1_gpio50 {
-+ pin-gpclk {
-+ pins = "gpio50";
-+ function = "alt1";
-+ bias-disable;
-+ };
-+ };
-+ gpclk2_gpio51: gpclk2_gpio51 {
-+ pin-gpclk {
-+ pins = "gpio51";
-+ function = "alt1";
-+ bias-disable;
-+ };
-+ };
-+
-+ i2c0_gpio46: i2c0_gpio46 {
-+ pin-sda {
-+ function = "alt0";
-+ pins = "gpio46";
-+ bias-pull-up;
-+ };
-+ pin-scl {
-+ function = "alt0";
-+ pins = "gpio47";
-+ bias-disable;
-+ };
-+ };
-+ i2c1_gpio46: i2c1_gpio46 {
-+ pin-sda {
-+ function = "alt1";
-+ pins = "gpio46";
-+ bias-pull-up;
-+ };
-+ pin-scl {
-+ function = "alt1";
-+ pins = "gpio47";
-+ bias-disable;
-+ };
-+ };
-+ i2c3_gpio2: i2c3_gpio2 {
-+ pin-sda {
-+ function = "alt5";
-+ pins = "gpio2";
-+ bias-pull-up;
-+ };
-+ pin-scl {
-+ function = "alt5";
-+ pins = "gpio3";
-+ bias-disable;
-+ };
-+ };
-+ i2c3_gpio4: i2c3_gpio4 {
-+ pin-sda {
-+ function = "alt5";
-+ pins = "gpio4";
-+ bias-pull-up;
-+ };
-+ pin-scl {
-+ function = "alt5";
-+ pins = "gpio5";
-+ bias-disable;
-+ };
-+ };
-+ i2c4_gpio6: i2c4_gpio6 {
-+ pin-sda {
-+ function = "alt5";
-+ pins = "gpio6";
-+ bias-pull-up;
-+ };
-+ pin-scl {
-+ function = "alt5";
-+ pins = "gpio7";
-+ bias-disable;
-+ };
-+ };
-+ i2c4_gpio8: i2c4_gpio8 {
-+ pin-sda {
-+ function = "alt5";
-+ pins = "gpio8";
-+ bias-pull-up;
-+ };
-+ pin-scl {
-+ function = "alt5";
-+ pins = "gpio9";
-+ bias-disable;
-+ };
-+ };
-+ i2c5_gpio10: i2c5_gpio10 {
-+ pin-sda {
-+ function = "alt5";
-+ pins = "gpio10";
-+ bias-pull-up;
-+ };
-+ pin-scl {
-+ function = "alt5";
-+ pins = "gpio11";
-+ bias-disable;
-+ };
-+ };
-+ i2c5_gpio12: i2c5_gpio12 {
-+ pin-sda {
-+ function = "alt5";
-+ pins = "gpio12";
-+ bias-pull-up;
-+ };
-+ pin-scl {
-+ function = "alt5";
-+ pins = "gpio13";
-+ bias-disable;
-+ };
-+ };
-+ i2c6_gpio0: i2c6_gpio0 {
-+ pin-sda {
-+ function = "alt5";
-+ pins = "gpio0";
-+ bias-pull-up;
-+ };
-+ pin-scl {
-+ function = "alt5";
-+ pins = "gpio1";
-+ bias-disable;
-+ };
-+ };
-+ i2c6_gpio22: i2c6_gpio22 {
-+ pin-sda {
-+ function = "alt5";
-+ pins = "gpio22";
-+ bias-pull-up;
-+ };
-+ pin-scl {
-+ function = "alt5";
-+ pins = "gpio23";
-+ bias-disable;
-+ };
-+ };
-+ i2c_slave_gpio8: i2c_slave_gpio8 {
-+ pins-i2c-slave {
-+ pins = "gpio8",
-+ "gpio9",
-+ "gpio10",
-+ "gpio11";
-+ function = "alt3";
-+ };
-+ };
-+
-+ jtag_gpio48: jtag_gpio48 {
-+ pins-jtag {
-+ pins = "gpio48",
-+ "gpio49",
-+ "gpio50",
-+ "gpio51",
-+ "gpio52",
-+ "gpio53";
-+ function = "alt4";
-+ };
-+ };
-+
-+ mii_gpio28: mii_gpio28 {
-+ pins-mii {
-+ pins = "gpio28",
-+ "gpio29",
-+ "gpio30",
-+ "gpio31";
-+ function = "alt4";
-+ };
-+ };
-+ mii_gpio36: mii_gpio36 {
-+ pins-mii {
-+ pins = "gpio36",
-+ "gpio37",
-+ "gpio38",
-+ "gpio39";
-+ function = "alt5";
-+ };
-+ };
-+
-+ pcm_gpio50: pcm_gpio50 {
-+ pins-pcm {
-+ pins = "gpio50",
-+ "gpio51",
-+ "gpio52",
-+ "gpio53";
-+ function = "alt2";
-+ };
-+ };
-+
-+ pwm0_0_gpio12: pwm0_0_gpio12 {
-+ pin-pwm {
-+ pins = "gpio12";
-+ function = "alt0";
-+ bias-disable;
-+ };
-+ };
-+ pwm0_0_gpio18: pwm0_0_gpio18 {
-+ pin-pwm {
-+ pins = "gpio18";
-+ function = "alt5";
-+ bias-disable;
-+ };
-+ };
-+ pwm1_0_gpio40: pwm1_0_gpio40 {
-+ pin-pwm {
-+ pins = "gpio40";
-+ function = "alt0";
-+ bias-disable;
-+ };
-+ };
-+ pwm0_1_gpio13: pwm0_1_gpio13 {
-+ pin-pwm {
-+ pins = "gpio13";
-+ function = "alt0";
-+ bias-disable;
-+ };
-+ };
-+ pwm0_1_gpio19: pwm0_1_gpio19 {
-+ pin-pwm {
-+ pins = "gpio19";
-+ function = "alt5";
-+ bias-disable;
-+ };
-+ };
-+ pwm1_1_gpio41: pwm1_1_gpio41 {
-+ pin-pwm {
-+ pins = "gpio41";
-+ function = "alt0";
-+ bias-disable;
-+ };
-+ };
-+ pwm0_1_gpio45: pwm0_1_gpio45 {
-+ pin-pwm {
-+ pins = "gpio45";
-+ function = "alt0";
-+ bias-disable;
-+ };
-+ };
-+ pwm0_0_gpio52: pwm0_0_gpio52 {
-+ pin-pwm {
-+ pins = "gpio52";
-+ function = "alt1";
-+ bias-disable;
-+ };
-+ };
-+ pwm0_1_gpio53: pwm0_1_gpio53 {
-+ pin-pwm {
-+ pins = "gpio53";
-+ function = "alt1";
-+ bias-disable;
-+ };
-+ };
-+
-+ rgmii_gpio35: rgmii_gpio35 {
-+ pin-start-stop {
-+ pins = "gpio35";
-+ function = "alt4";
-+ };
-+ pin-rx-ok {
-+ pins = "gpio36";
-+ function = "alt4";
-+ };
-+ };
-+ rgmii_irq_gpio34: rgmii_irq_gpio34 {
-+ pin-irq {
-+ pins = "gpio34";
-+ function = "alt5";
-+ };
-+ };
-+ rgmii_irq_gpio39: rgmii_irq_gpio39 {
-+ pin-irq {
-+ pins = "gpio39";
-+ function = "alt4";
-+ };
-+ };
-+ rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
-+ pins-mdio {
-+ pins = "gpio28",
-+ "gpio29";
-+ function = "alt5";
-+ };
-+ };
-+ rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
-+ pins-mdio {
-+ pins = "gpio37",
-+ "gpio38";
-+ function = "alt4";
-+ };
-+ };
-+
-+ spi0_gpio46: spi0_gpio46 {
-+ pins-spi {
-+ pins = "gpio46",
-+ "gpio47",
-+ "gpio48",
-+ "gpio49";
-+ function = "alt2";
-+ };
-+ };
-+ spi2_gpio46: spi2_gpio46 {
-+ pins-spi {
-+ pins = "gpio46",
-+ "gpio47",
-+ "gpio48",
-+ "gpio49",
-+ "gpio50";
-+ function = "alt5";
-+ };
-+ };
-+ spi3_gpio0: spi3_gpio0 {
-+ pins-spi {
-+ pins = "gpio0",
-+ "gpio1",
-+ "gpio2",
-+ "gpio3";
-+ function = "alt3";
-+ };
-+ };
-+ spi4_gpio4: spi4_gpio4 {
-+ pins-spi {
-+ pins = "gpio4",
-+ "gpio5",
-+ "gpio6",
-+ "gpio7";
-+ function = "alt3";
-+ };
-+ };
-+ spi5_gpio12: spi5_gpio12 {
-+ pins-spi {
-+ pins = "gpio12",
-+ "gpio13",
-+ "gpio14",
-+ "gpio15";
-+ function = "alt3";
-+ };
-+ };
-+ spi6_gpio18: spi6_gpio18 {
-+ pins-spi {
-+ pins = "gpio18",
-+ "gpio19",
-+ "gpio20",
-+ "gpio21";
-+ function = "alt3";
-+ };
-+ };
-+
-+ uart2_gpio0: uart2_gpio0 {
-+ pin-tx {
-+ pins = "gpio0";
-+ function = "alt4";
-+ bias-disable;
-+ };
-+ pin-rx {
-+ pins = "gpio1";
-+ function = "alt4";
-+ bias-pull-up;
-+ };
-+ };
-+ uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
-+ pin-cts {
-+ pins = "gpio2";
-+ function = "alt4";
-+ bias-pull-up;
-+ };
-+ pin-rts {
-+ pins = "gpio3";
-+ function = "alt4";
-+ bias-disable;
-+ };
-+ };
-+ uart3_gpio4: uart3_gpio4 {
-+ pin-tx {
-+ pins = "gpio4";
-+ function = "alt4";
-+ bias-disable;
-+ };
-+ pin-rx {
-+ pins = "gpio5";
-+ function = "alt4";
-+ bias-pull-up;
-+ };
-+ };
-+ uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
-+ pin-cts {
-+ pins = "gpio6";
-+ function = "alt4";
-+ bias-pull-up;
-+ };
-+ pin-rts {
-+ pins = "gpio7";
-+ function = "alt4";
-+ bias-disable;
-+ };
-+ };
-+ uart4_gpio8: uart4_gpio8 {
-+ pin-tx {
-+ pins = "gpio8";
-+ function = "alt4";
-+ bias-disable;
-+ };
-+ pin-rx {
-+ pins = "gpio9";
-+ function = "alt4";
-+ bias-pull-up;
-+ };
-+ };
-+ uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
-+ pin-cts {
-+ pins = "gpio10";
-+ function = "alt4";
-+ bias-pull-up;
-+ };
-+ pin-rts {
-+ pins = "gpio11";
-+ function = "alt4";
-+ bias-disable;
-+ };
-+ };
-+ uart5_gpio12: uart5_gpio12 {
-+ pin-tx {
-+ pins = "gpio12";
-+ function = "alt4";
-+ bias-disable;
-+ };
-+ pin-rx {
-+ pins = "gpio13";
-+ function = "alt4";
-+ bias-pull-up;
-+ };
-+ };
-+ uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
-+ pin-cts {
-+ pins = "gpio14";
-+ function = "alt4";
-+ bias-pull-up;
-+ };
-+ pin-rts {
-+ pins = "gpio15";
-+ function = "alt4";
-+ bias-disable;
-+ };
-+ };
-+};
-+
-+&i2c0 {
-+ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&i2c1 {
-+ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&mailbox {
-+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&sdhci {
-+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&sdhost {
-+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&spi {
-+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&spi1 {
-+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&spi2 {
-+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&system_timer {
-+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&txp {
-+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&uart0 {
-+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&uart1 {
-+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&usb {
-+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-+};
-+
-+&vec {
-+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
-@@ -0,0 +1,7 @@
-+// SPDX-License-Identifier: GPL-2.0
-+&usb {
-+ dr_mode = "peripheral";
-+ g-rx-fifo-size = <256>;
-+ g-np-tx-fifo-size = <32>;
-+ g-tx-fifo-size = <256 256 512 512 512 768 768>;
-+};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 17:54:54 +0000