aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.4/950-0412-ARM-dts-Clean-out-downstream-BCM2711-2838-files.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0412-ARM-dts-Clean-out-downstream-BCM2711-2838-files.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.4/950-0412-ARM-dts-Clean-out-downstream-BCM2711-2838-files.patch1846
1 files changed, 0 insertions, 1846 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0412-ARM-dts-Clean-out-downstream-BCM2711-2838-files.patch b/target/linux/bcm27xx/patches-5.4/950-0412-ARM-dts-Clean-out-downstream-BCM2711-2838-files.patch
deleted file mode 100644
index a66202a2c9..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0412-ARM-dts-Clean-out-downstream-BCM2711-2838-files.patch
+++ /dev/null
@@ -1,1846 +0,0 @@
-From 134e06abd2d002edfdac3561656ab9e8161b29a3 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.com>
-Date: Fri, 31 Jan 2020 16:53:13 +0000
-Subject: [PATCH] ARM: dts: Clean out downstream BCM2711/2838 files
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.com>
----
- arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 157 -----
- arch/arm/boot/dts/bcm2711-rpi.dtsi | 7 -
- arch/arm/boot/dts/bcm2711.dtsi | 890 --------------------------
- arch/arm/boot/dts/bcm2838-rpi.dtsi | 25 -
- arch/arm/boot/dts/bcm2838.dtsi | 733 ---------------------
- 5 files changed, 1812 deletions(-)
- delete mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts
- delete mode 100644 arch/arm/boot/dts/bcm2711-rpi.dtsi
- delete mode 100644 arch/arm/boot/dts/bcm2711.dtsi
- delete mode 100644 arch/arm/boot/dts/bcm2838-rpi.dtsi
- delete mode 100644 arch/arm/boot/dts/bcm2838.dtsi
-
---- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
-+++ /dev/null
-@@ -1,157 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0
--/dts-v1/;
--#include "bcm2711.dtsi"
--#include "bcm2835-rpi.dtsi"
--#include "bcm283x-rpi-usb-peripheral.dtsi"
--
--/ {
-- compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
-- model = "Raspberry Pi 4 Model B";
--
-- chosen {
-- /* 8250 auxiliary UART instead of pl011 */
-- stdout-path = "serial1:115200n8";
-- };
--
-- /* Will be filled by the bootloader */
-- memory@0 {
-- device_type = "memory";
-- reg = <0 0 0>;
-- };
--
-- aliases {
-- ethernet0 = &genet;
-- };
--
-- leds {
-- act {
-- gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-- };
--
-- pwr {
-- label = "PWR";
-- gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-- };
-- };
--
-- wifi_pwrseq: wifi-pwrseq {
-- compatible = "mmc-pwrseq-simple";
-- reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-- };
--
-- sd_io_1v8_reg: sd_io_1v8_reg {
-- compatible = "regulator-gpio";
-- regulator-name = "vdd-sd-io";
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <3300000>;
-- regulator-boot-on;
-- regulator-always-on;
-- regulator-settling-time-us = <5000>;
-- gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-- states = <1800000 0x1
-- 3300000 0x0>;
-- status = "okay";
-- };
--};
--
--&firmware {
-- expgpio: gpio {
-- compatible = "raspberrypi,firmware-gpio";
-- gpio-controller;
-- #gpio-cells = <2>;
-- gpio-line-names = "BT_ON",
-- "WL_ON",
-- "PWR_LED_OFF",
-- "GLOBAL_RESET",
-- "VDD_SD_IO_SEL",
-- "CAM_GPIO",
-- "",
-- "";
-- status = "okay";
-- };
--};
--
--&pwm1 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
-- status = "okay";
--};
--
--/* SDHCI is used to control the SDIO for wireless */
--&sdhci {
-- #address-cells = <1>;
-- #size-cells = <0>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&emmc_gpio34>;
-- bus-width = <4>;
-- non-removable;
-- mmc-pwrseq = <&wifi_pwrseq>;
-- status = "okay";
--
-- brcmf: wifi@1 {
-- reg = <1>;
-- compatible = "brcm,bcm4329-fmac";
-- };
--};
--
--/* EMMC2 is used to drive the SD card */
--&emmc2 {
-- vqmmc-supply = <&sd_io_1v8_reg>;
-- broken-cd;
-- status = "okay";
--};
--
--&genet {
-- phy-handle = <&phy1>;
-- phy-mode = "rgmii-rxid";
-- status = "okay";
--};
--
--&genet_mdio {
-- phy1: ethernet-phy@1 {
-- /* No PHY interrupt */
-- reg = <0x1>;
-- };
--};
--
--/* uart0 communicates with the BT module */
--&uart0 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
-- uart-has-rtscts;
-- status = "okay";
--
-- bluetooth {
-- compatible = "brcm,bcm43438-bt";
-- max-speed = <2000000>;
-- shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-- };
--};
--
--/* uart1 is mapped to the pin header */
--&uart1 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&uart1_gpio14>;
-- status = "okay";
--};
--
--&vchiq {
-- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--/ {
-- __overrides__ {
-- act_led_gpio = <&act_led>,"gpios:4";
-- act_led_activelow = <&act_led>,"gpios:8";
-- act_led_trigger = <&act_led>,"linux,default-trigger";
--
-- pwr_led_gpio = <&pwr_led>,"gpios:4";
-- pwr_led_activelow = <&pwr_led>,"gpios:8";
-- pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
--
-- eth_led0 = <&phy1>,"led-modes:0";
-- eth_led1 = <&phy1>,"led-modes:4";
--
-- sd_poll_once = <&emmc2>, "non-removable?";
-- };
--};
---- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
-+++ /dev/null
-@@ -1,7 +0,0 @@
--#include "bcm2708-rpi.dtsi"
--#include "bcm2838-rpi.dtsi"
--
--&v3d {
-- /* Undo the overwriting by bcm270x.dtsi */
-- power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
--};
---- a/arch/arm/boot/dts/bcm2711.dtsi
-+++ /dev/null
-@@ -1,890 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0
--#include "bcm283x.dtsi"
--
--#include <dt-bindings/interrupt-controller/arm-gic.h>
--#include <dt-bindings/soc/bcm2835-pm.h>
--
--/ {
-- compatible = "brcm,bcm2711";
--
-- #address-cells = <2>;
-- #size-cells = <1>;
--
-- interrupt-parent = <&gicv2>;
--
-- reserved-memory {
-- #address-cells = <2>;
-- #size-cells = <1>;
-- ranges;
--
-- /*
-- * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
-- * that's not good enough for the BCM2711 as some devices can
-- * only address the lower 1G of memory (ZONE_DMA).
-- */
-- linux,cma {
-- compatible = "shared-dma-pool";
-- size = <0x2000000>; /* 32MB */
-- alloc-ranges = <0x0 0x00000000 0x40000000>;
-- reusable;
-- linux,cma-default;
-- };
-- };
--
--
-- soc {
-- /*
-- * Defined ranges:
-- * Common BCM283x peripherals
-- * BCM2711-specific peripherals
-- * ARM-local peripherals
-- */
-- ranges = <0x7e000000 0x0 0xfe000000 0x01800000>,
-- <0x7c000000 0x0 0xfc000000 0x02000000>,
-- <0x40000000 0x0 0xff800000 0x00800000>;
-- /* Emulate a contiguous 30-bit address range for DMA */
-- dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>;
--
-- /*
-- * This node is the provider for the enable-method for
-- * bringing up secondary cores.
-- */
-- local_intc: local_intc@40000000 {
-- compatible = "brcm,bcm2836-l1-intc";
-- reg = <0x40000000 0x100>;
-- };
--
-- gicv2: interrupt-controller@40041000 {
-- interrupt-controller;
-- #interrupt-cells = <3>;
-- compatible = "arm,gic-400";
-- reg = <0x40041000 0x1000>,
-- <0x40042000 0x2000>,
-- <0x40044000 0x2000>,
-- <0x40046000 0x2000>;
-- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-- IRQ_TYPE_LEVEL_HIGH)>;
-- };
--
-- dma: dma@7e007000 {
-- compatible = "brcm,bcm2835-dma";
-- reg = <0x7e007000 0xb00>;
-- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-- /* DMA lite 7 - 10 */
-- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-- interrupt-names = "dma0",
-- "dma1",
-- "dma2",
-- "dma3",
-- "dma4",
-- "dma5",
-- "dma6",
-- "dma7",
-- "dma8",
-- "dma9",
-- "dma10";
-- #dma-cells = <1>;
-- brcm,dma-channel-mask = <0x07f5>;
-- };
--
-- pm: watchdog@7e100000 {
-- compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
-- #power-domain-cells = <1>;
-- #reset-cells = <1>;
-- reg = <0x7e100000 0x114>,
-- <0x7e00a000 0x24>,
-- <0x7ec11000 0x20>;
-- clocks = <&clocks BCM2835_CLOCK_V3D>,
-- <&clocks BCM2835_CLOCK_PERI_IMAGE>,
-- <&clocks BCM2835_CLOCK_H264>,
-- <&clocks BCM2835_CLOCK_ISP>;
-- clock-names = "v3d", "peri_image", "h264", "isp";
-- system-power-controller;
-- };
--
-- rng@7e104000 {
-- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
--
-- /* RNG is incompatible with brcm,bcm2835-rng */
-- status = "disabled";
-- };
--
-- uart2: serial@7e201400 {
-- compatible = "arm,pl011", "arm,primecell";
-- reg = <0x7e201400 0x200>;
-- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_UART>,
-- <&clocks BCM2835_CLOCK_VPU>;
-- clock-names = "uartclk", "apb_pclk";
-- arm,primecell-periphid = <0x00241011>;
-- status = "disabled";
-- };
--
-- uart3: serial@7e201600 {
-- compatible = "arm,pl011", "arm,primecell";
-- reg = <0x7e201600 0x200>;
-- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_UART>,
-- <&clocks BCM2835_CLOCK_VPU>;
-- clock-names = "uartclk", "apb_pclk";
-- arm,primecell-periphid = <0x00241011>;
-- status = "disabled";
-- };
--
-- uart4: serial@7e201800 {
-- compatible = "arm,pl011", "arm,primecell";
-- reg = <0x7e201800 0x200>;
-- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_UART>,
-- <&clocks BCM2835_CLOCK_VPU>;
-- clock-names = "uartclk", "apb_pclk";
-- arm,primecell-periphid = <0x00241011>;
-- status = "disabled";
-- };
--
-- uart5: serial@7e201a00 {
-- compatible = "arm,pl011", "arm,primecell";
-- reg = <0x7e201a00 0x200>;
-- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_UART>,
-- <&clocks BCM2835_CLOCK_VPU>;
-- clock-names = "uartclk", "apb_pclk";
-- arm,primecell-periphid = <0x00241011>;
-- status = "disabled";
-- };
--
-- spi3: spi@7e204600 {
-- compatible = "brcm,bcm2835-spi";
-- reg = <0x7e204600 0x0200>;
-- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- spi4: spi@7e204800 {
-- compatible = "brcm,bcm2835-spi";
-- reg = <0x7e204800 0x0200>;
-- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- spi5: spi@7e204a00 {
-- compatible = "brcm,bcm2835-spi";
-- reg = <0x7e204a00 0x0200>;
-- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- spi6: spi@7e204c00 {
-- compatible = "brcm,bcm2835-spi";
-- reg = <0x7e204c00 0x0200>;
-- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- i2c3: i2c@7e205600 {
-- compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-- reg = <0x7e205600 0x200>;
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- i2c4: i2c@7e205800 {
-- compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-- reg = <0x7e205800 0x200>;
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- i2c5: i2c@7e205a00 {
-- compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-- reg = <0x7e205a00 0x200>;
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- i2c6: i2c@7e205c00 {
-- compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-- reg = <0x7e205c00 0x200>;
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- pwm1: pwm@7e20c800 {
-- compatible = "brcm,bcm2835-pwm";
-- reg = <0x7e20c800 0x28>;
-- clocks = <&clocks BCM2835_CLOCK_PWM>;
-- assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
-- assigned-clock-rates = <10000000>;
-- #pwm-cells = <2>;
-- status = "disabled";
-- };
--
-- emmc2: emmc2@7e340000 {
-- compatible = "brcm,bcm2711-emmc2";
-- reg = <0x7e340000 0x100>;
-- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2711_CLOCK_EMMC2>;
-- status = "disabled";
-- };
--
-- hvs@7e400000 {
-- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-- };
-- };
--
-- arm-pmu {
-- compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
-- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-- };
--
-- timer {
-- compatible = "arm,armv8-timer";
-- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
-- IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
-- IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
-- IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
-- IRQ_TYPE_LEVEL_LOW)>;
-- /* This only applies to the ARMv7 stub */
-- arm,cpu-registers-not-fw-configured;
-- };
--
-- cpus: cpus {
-- #address-cells = <1>;
-- #size-cells = <0>;
-- enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
--
-- cpu0: cpu@0 {
-- device_type = "cpu";
-- compatible = "arm,cortex-a72";
-- reg = <0>;
-- enable-method = "spin-table";
-- cpu-release-addr = <0x0 0x000000d8>;
-- };
--
-- cpu1: cpu@1 {
-- device_type = "cpu";
-- compatible = "arm,cortex-a72";
-- reg = <1>;
-- enable-method = "spin-table";
-- cpu-release-addr = <0x0 0x000000e0>;
-- };
--
-- cpu2: cpu@2 {
-- device_type = "cpu";
-- compatible = "arm,cortex-a72";
-- reg = <2>;
-- enable-method = "spin-table";
-- cpu-release-addr = <0x0 0x000000e8>;
-- };
--
-- cpu3: cpu@3 {
-- device_type = "cpu";
-- compatible = "arm,cortex-a72";
-- reg = <3>;
-- enable-method = "spin-table";
-- cpu-release-addr = <0x0 0x000000f0>;
-- };
-- };
--
-- scb {
-- compatible = "simple-bus";
-- #address-cells = <2>;
-- #size-cells = <1>;
--
-- ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>;
--
-- genet: ethernet@7d580000 {
-- compatible = "brcm,bcm2711-genet-v5";
-- reg = <0x0 0x7d580000 0x10000>;
-- #address-cells = <0x1>;
-- #size-cells = <0x1>;
-- interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-- status = "disabled";
--
-- genet_mdio: mdio@e14 {
-- compatible = "brcm,genet-mdio-v5";
-- reg = <0xe14 0x8>;
-- reg-names = "mdio";
-- #address-cells = <0x0>;
-- #size-cells = <0x1>;
-- };
-- };
-- };
--};
--
--&clk_osc {
-- clock-frequency = <54000000>;
--};
--
--&clocks {
-- compatible = "brcm,bcm2711-cprman";
--};
--
--&cpu_thermal {
-- coefficients = <(-487) 410040>;
--};
--
--&dsi0 {
-- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&dsi1 {
-- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&gpio {
-- compatible = "brcm,bcm2711-gpio";
-- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
--
-- gpclk0_gpio49: gpclk0_gpio49 {
-- pin-gpclk {
-- pins = "gpio49";
-- function = "alt1";
-- bias-disable;
-- };
-- };
-- gpclk1_gpio50: gpclk1_gpio50 {
-- pin-gpclk {
-- pins = "gpio50";
-- function = "alt1";
-- bias-disable;
-- };
-- };
-- gpclk2_gpio51: gpclk2_gpio51 {
-- pin-gpclk {
-- pins = "gpio51";
-- function = "alt1";
-- bias-disable;
-- };
-- };
--
-- i2c0_gpio46: i2c0_gpio46 {
-- pin-sda {
-- function = "alt0";
-- pins = "gpio46";
-- bias-pull-up;
-- };
-- pin-scl {
-- function = "alt0";
-- pins = "gpio47";
-- bias-disable;
-- };
-- };
-- i2c1_gpio46: i2c1_gpio46 {
-- pin-sda {
-- function = "alt1";
-- pins = "gpio46";
-- bias-pull-up;
-- };
-- pin-scl {
-- function = "alt1";
-- pins = "gpio47";
-- bias-disable;
-- };
-- };
-- i2c3_gpio2: i2c3_gpio2 {
-- pin-sda {
-- function = "alt5";
-- pins = "gpio2";
-- bias-pull-up;
-- };
-- pin-scl {
-- function = "alt5";
-- pins = "gpio3";
-- bias-disable;
-- };
-- };
-- i2c3_gpio4: i2c3_gpio4 {
-- pin-sda {
-- function = "alt5";
-- pins = "gpio4";
-- bias-pull-up;
-- };
-- pin-scl {
-- function = "alt5";
-- pins = "gpio5";
-- bias-disable;
-- };
-- };
-- i2c4_gpio6: i2c4_gpio6 {
-- pin-sda {
-- function = "alt5";
-- pins = "gpio6";
-- bias-pull-up;
-- };
-- pin-scl {
-- function = "alt5";
-- pins = "gpio7";
-- bias-disable;
-- };
-- };
-- i2c4_gpio8: i2c4_gpio8 {
-- pin-sda {
-- function = "alt5";
-- pins = "gpio8";
-- bias-pull-up;
-- };
-- pin-scl {
-- function = "alt5";
-- pins = "gpio9";
-- bias-disable;
-- };
-- };
-- i2c5_gpio10: i2c5_gpio10 {
-- pin-sda {
-- function = "alt5";
-- pins = "gpio10";
-- bias-pull-up;
-- };
-- pin-scl {
-- function = "alt5";
-- pins = "gpio11";
-- bias-disable;
-- };
-- };
-- i2c5_gpio12: i2c5_gpio12 {
-- pin-sda {
-- function = "alt5";
-- pins = "gpio12";
-- bias-pull-up;
-- };
-- pin-scl {
-- function = "alt5";
-- pins = "gpio13";
-- bias-disable;
-- };
-- };
-- i2c6_gpio0: i2c6_gpio0 {
-- pin-sda {
-- function = "alt5";
-- pins = "gpio0";
-- bias-pull-up;
-- };
-- pin-scl {
-- function = "alt5";
-- pins = "gpio1";
-- bias-disable;
-- };
-- };
-- i2c6_gpio22: i2c6_gpio22 {
-- pin-sda {
-- function = "alt5";
-- pins = "gpio22";
-- bias-pull-up;
-- };
-- pin-scl {
-- function = "alt5";
-- pins = "gpio23";
-- bias-disable;
-- };
-- };
-- i2c_slave_gpio8: i2c_slave_gpio8 {
-- pins-i2c-slave {
-- pins = "gpio8",
-- "gpio9",
-- "gpio10",
-- "gpio11";
-- function = "alt3";
-- };
-- };
--
-- jtag_gpio48: jtag_gpio48 {
-- pins-jtag {
-- pins = "gpio48",
-- "gpio49",
-- "gpio50",
-- "gpio51",
-- "gpio52",
-- "gpio53";
-- function = "alt4";
-- };
-- };
--
-- mii_gpio28: mii_gpio28 {
-- pins-mii {
-- pins = "gpio28",
-- "gpio29",
-- "gpio30",
-- "gpio31";
-- function = "alt4";
-- };
-- };
-- mii_gpio36: mii_gpio36 {
-- pins-mii {
-- pins = "gpio36",
-- "gpio37",
-- "gpio38",
-- "gpio39";
-- function = "alt5";
-- };
-- };
--
-- pcm_gpio50: pcm_gpio50 {
-- pins-pcm {
-- pins = "gpio50",
-- "gpio51",
-- "gpio52",
-- "gpio53";
-- function = "alt2";
-- };
-- };
--
-- pwm0_0_gpio12: pwm0_0_gpio12 {
-- pin-pwm {
-- pins = "gpio12";
-- function = "alt0";
-- bias-disable;
-- };
-- };
-- pwm0_0_gpio18: pwm0_0_gpio18 {
-- pin-pwm {
-- pins = "gpio18";
-- function = "alt5";
-- bias-disable;
-- };
-- };
-- pwm1_0_gpio40: pwm1_0_gpio40 {
-- pin-pwm {
-- pins = "gpio40";
-- function = "alt0";
-- bias-disable;
-- };
-- };
-- pwm0_1_gpio13: pwm0_1_gpio13 {
-- pin-pwm {
-- pins = "gpio13";
-- function = "alt0";
-- bias-disable;
-- };
-- };
-- pwm0_1_gpio19: pwm0_1_gpio19 {
-- pin-pwm {
-- pins = "gpio19";
-- function = "alt5";
-- bias-disable;
-- };
-- };
-- pwm1_1_gpio41: pwm1_1_gpio41 {
-- pin-pwm {
-- pins = "gpio41";
-- function = "alt0";
-- bias-disable;
-- };
-- };
-- pwm0_1_gpio45: pwm0_1_gpio45 {
-- pin-pwm {
-- pins = "gpio45";
-- function = "alt0";
-- bias-disable;
-- };
-- };
-- pwm0_0_gpio52: pwm0_0_gpio52 {
-- pin-pwm {
-- pins = "gpio52";
-- function = "alt1";
-- bias-disable;
-- };
-- };
-- pwm0_1_gpio53: pwm0_1_gpio53 {
-- pin-pwm {
-- pins = "gpio53";
-- function = "alt1";
-- bias-disable;
-- };
-- };
--
-- rgmii_gpio35: rgmii_gpio35 {
-- pin-start-stop {
-- pins = "gpio35";
-- function = "alt4";
-- };
-- pin-rx-ok {
-- pins = "gpio36";
-- function = "alt4";
-- };
-- };
-- rgmii_irq_gpio34: rgmii_irq_gpio34 {
-- pin-irq {
-- pins = "gpio34";
-- function = "alt5";
-- };
-- };
-- rgmii_irq_gpio39: rgmii_irq_gpio39 {
-- pin-irq {
-- pins = "gpio39";
-- function = "alt4";
-- };
-- };
-- rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
-- pins-mdio {
-- pins = "gpio28",
-- "gpio29";
-- function = "alt5";
-- };
-- };
-- rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
-- pins-mdio {
-- pins = "gpio37",
-- "gpio38";
-- function = "alt4";
-- };
-- };
--
-- spi0_gpio46: spi0_gpio46 {
-- pins-spi {
-- pins = "gpio46",
-- "gpio47",
-- "gpio48",
-- "gpio49";
-- function = "alt2";
-- };
-- };
-- spi2_gpio46: spi2_gpio46 {
-- pins-spi {
-- pins = "gpio46",
-- "gpio47",
-- "gpio48",
-- "gpio49",
-- "gpio50";
-- function = "alt5";
-- };
-- };
-- spi3_gpio0: spi3_gpio0 {
-- pins-spi {
-- pins = "gpio0",
-- "gpio1",
-- "gpio2",
-- "gpio3";
-- function = "alt3";
-- };
-- };
-- spi4_gpio4: spi4_gpio4 {
-- pins-spi {
-- pins = "gpio4",
-- "gpio5",
-- "gpio6",
-- "gpio7";
-- function = "alt3";
-- };
-- };
-- spi5_gpio12: spi5_gpio12 {
-- pins-spi {
-- pins = "gpio12",
-- "gpio13",
-- "gpio14",
-- "gpio15";
-- function = "alt3";
-- };
-- };
-- spi6_gpio18: spi6_gpio18 {
-- pins-spi {
-- pins = "gpio18",
-- "gpio19",
-- "gpio20",
-- "gpio21";
-- function = "alt3";
-- };
-- };
--
-- uart2_gpio0: uart2_gpio0 {
-- pin-tx {
-- pins = "gpio0";
-- function = "alt4";
-- bias-disable;
-- };
-- pin-rx {
-- pins = "gpio1";
-- function = "alt4";
-- bias-pull-up;
-- };
-- };
-- uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
-- pin-cts {
-- pins = "gpio2";
-- function = "alt4";
-- bias-pull-up;
-- };
-- pin-rts {
-- pins = "gpio3";
-- function = "alt4";
-- bias-disable;
-- };
-- };
-- uart3_gpio4: uart3_gpio4 {
-- pin-tx {
-- pins = "gpio4";
-- function = "alt4";
-- bias-disable;
-- };
-- pin-rx {
-- pins = "gpio5";
-- function = "alt4";
-- bias-pull-up;
-- };
-- };
-- uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
-- pin-cts {
-- pins = "gpio6";
-- function = "alt4";
-- bias-pull-up;
-- };
-- pin-rts {
-- pins = "gpio7";
-- function = "alt4";
-- bias-disable;
-- };
-- };
-- uart4_gpio8: uart4_gpio8 {
-- pin-tx {
-- pins = "gpio8";
-- function = "alt4";
-- bias-disable;
-- };
-- pin-rx {
-- pins = "gpio9";
-- function = "alt4";
-- bias-pull-up;
-- };
-- };
-- uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
-- pin-cts {
-- pins = "gpio10";
-- function = "alt4";
-- bias-pull-up;
-- };
-- pin-rts {
-- pins = "gpio11";
-- function = "alt4";
-- bias-disable;
-- };
-- };
-- uart5_gpio12: uart5_gpio12 {
-- pin-tx {
-- pins = "gpio12";
-- function = "alt4";
-- bias-disable;
-- };
-- pin-rx {
-- pins = "gpio13";
-- function = "alt4";
-- bias-pull-up;
-- };
-- };
-- uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
-- pin-cts {
-- pins = "gpio14";
-- function = "alt4";
-- bias-pull-up;
-- };
-- pin-rts {
-- pins = "gpio15";
-- function = "alt4";
-- bias-disable;
-- };
-- };
--};
--
--&i2c0 {
-- compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&i2c1 {
-- compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&mailbox {
-- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&sdhci {
-- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&sdhost {
-- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&spi {
-- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&spi1 {
-- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&spi2 {
-- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&system_timer {
-- interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&txp {
-- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&uart0 {
-- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&uart1 {
-- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&usb {
-- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&vec {
-- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
--};
---- a/arch/arm/boot/dts/bcm2838-rpi.dtsi
-+++ /dev/null
-@@ -1,25 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0
--
--/ {
-- soc {
-- /delete-node/ mailbox@7e00b840;
-- };
--};
--
--&scb {
-- vchiq: mailbox@7e00b840 {
-- compatible = "brcm,bcm2838-vchiq";
-- reg = <0 0x7e00b840 0x3c>;
-- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-- };
--};
--
--&dma {
-- /* The VPU firmware uses DMA channel 11 for VCHIQ */
-- brcm,dma-channel-mask = <0x1f5>;
--};
--
--&dma40 {
-- /* The VPU firmware DMA channel 11 for VCHIQ */
-- brcm,dma-channel-mask = <0x7000>;
--};
---- a/arch/arm/boot/dts/bcm2838.dtsi
-+++ /dev/null
-@@ -1,733 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0
--#include "bcm283x.dtsi"
--
--#include <dt-bindings/interrupt-controller/arm-gic.h>
--#include <dt-bindings/soc/bcm2835-pm.h>
--
--/ {
-- compatible = "brcm,bcm2838";
--
-- #address-cells = <2>;
-- #size-cells = <1>;
--
-- interrupt-parent = <&gicv2>;
--
-- soc {
-- ranges = <0x7e000000 0x0 0xfe000000 0x01800000>,
-- <0x7c000000 0x0 0xfc000000 0x02000000>,
-- <0x40000000 0x0 0xff800000 0x00800000>;
-- /* Emulate a contiguous 30-bit address range for DMA */
-- dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>;
--
-- /delete-node/ interrupt-controller@7e00f300;
-- /delete-node/ v3d@7ec00000;
--
-- local_intc: local_intc@40000000 {
-- compatible = "brcm,bcm2836-l1-intc";
-- reg = <0x40000000 0x100>;
-- };
--
-- gicv2: interrupt-controller@40041000 {
-- interrupt-controller;
-- #interrupt-cells = <3>;
-- compatible = "arm,gic-400";
-- reg = <0x40041000 0x1000>,
-- <0x40042000 0x2000>,
-- <0x40044000 0x2000>,
-- <0x40046000 0x2000>;
-- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-- IRQ_TYPE_LEVEL_HIGH)>;
-- };
--
-- thermal: thermal@7d5d2200 {
-- compatible = "brcm,avs-tmon-bcm2838";
-- reg = <0x7d5d2200 0x2c>;
-- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-- interrupt-names = "tmon";
-- clocks = <&clocks BCM2835_CLOCK_TSENS>;
-- #thermal-sensor-cells = <0>;
-- status = "okay";
-- };
--
-- pm: watchdog@7e100000 {
-- reg = <0x7e100000 0x114>,
-- <0x7e00a000 0x24>,
-- <0x7ec11000 0x20>;
-- };
--
-- rng@7e104000 {
-- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-- };
--
-- uart2: serial@7e201400 {
-- compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-- reg = <0x7e201400 0x200>;
-- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_UART>,
-- <&clocks BCM2835_CLOCK_VPU>;
-- clock-names = "uartclk", "apb_pclk";
-- arm,primecell-periphid = <0x00241011>;
-- status = "disabled";
-- };
--
-- uart3: serial@7e201600 {
-- compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-- reg = <0x7e201600 0x200>;
-- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_UART>,
-- <&clocks BCM2835_CLOCK_VPU>;
-- clock-names = "uartclk", "apb_pclk";
-- arm,primecell-periphid = <0x00241011>;
-- status = "disabled";
-- };
--
-- uart4: serial@7e201800 {
-- compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-- reg = <0x7e201800 0x200>;
-- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_UART>,
-- <&clocks BCM2835_CLOCK_VPU>;
-- clock-names = "uartclk", "apb_pclk";
-- arm,primecell-periphid = <0x00241011>;
-- status = "disabled";
-- };
--
-- uart5: serial@7e201a00 {
-- compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-- reg = <0x7e201a00 0x200>;
-- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_UART>,
-- <&clocks BCM2835_CLOCK_VPU>;
-- clock-names = "uartclk", "apb_pclk";
-- arm,primecell-periphid = <0x00241011>;
-- status = "disabled";
-- };
--
-- spi@7e204000 {
-- reg = <0x7e204000 0x0200>;
-- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-- };
--
-- spi3: spi@7e204600 {
-- compatible = "brcm,bcm2835-spi";
-- reg = <0x7e204600 0x0200>;
-- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- spi4: spi@7e204800 {
-- compatible = "brcm,bcm2835-spi";
-- reg = <0x7e204800 0x0200>;
-- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- spi5: spi@7e204a00 {
-- compatible = "brcm,bcm2835-spi";
-- reg = <0x7e204a00 0x0200>;
-- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- spi6: spi@7e204c00 {
-- compatible = "brcm,bcm2835-spi";
-- reg = <0x7e204c00 0x0200>;
-- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- i2c3: i2c@7e205600 {
-- compatible = "brcm,bcm2835-i2c";
-- reg = <0x7e205600 0x200>;
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- i2c4: i2c@7e205800 {
-- compatible = "brcm,bcm2835-i2c";
-- reg = <0x7e205800 0x200>;
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- i2c5: i2c@7e205a00 {
-- compatible = "brcm,bcm2835-i2c";
-- reg = <0x7e205a00 0x200>;
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- i2c6: i2c@7e205c00 {
-- compatible = "brcm,bcm2835-i2c";
-- reg = <0x7e205c00 0x200>;
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2835_CLOCK_VPU>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
-- };
--
-- pwm1: pwm@7e20c800 {
-- compatible = "brcm,bcm2835-pwm";
-- reg = <0x7e20c800 0x28>;
-- clocks = <&clocks BCM2835_CLOCK_PWM>;
-- assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
-- assigned-clock-rates = <10000000>;
-- #pwm-cells = <2>;
-- status = "disabled";
-- };
--
-- emmc2: emmc2@7e340000 {
-- compatible = "brcm,bcm2711-emmc2";
-- status = "okay";
-- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&clocks BCM2711_CLOCK_EMMC2>;
-- reg = <0x7e340000 0x100>;
-- };
--
-- hvs@7e400000 {
-- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-- };
-- };
--
-- arm-pmu {
-- compatible = "arm,cortex-a72-pmu";
-- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-- };
--
-- timer {
-- compatible = "arm,armv7-timer";
-- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
-- IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
-- IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
-- IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
-- IRQ_TYPE_LEVEL_LOW)>;
-- arm,cpu-registers-not-fw-configured;
-- };
--
-- cpus: cpus {
-- #address-cells = <1>;
-- #size-cells = <0>;
-- enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
--
-- cpu0: cpu@0 {
-- device_type = "cpu";
-- compatible = "arm,cortex-a72";
-- reg = <0>;
-- enable-method = "spin-table";
-- cpu-release-addr = <0x0 0x000000d8>;
-- };
--
-- cpu1: cpu@1 {
-- device_type = "cpu";
-- compatible = "arm,cortex-a72";
-- reg = <1>;
-- enable-method = "spin-table";
-- cpu-release-addr = <0x0 0x000000e0>;
-- };
--
-- cpu2: cpu@2 {
-- device_type = "cpu";
-- compatible = "arm,cortex-a72";
-- reg = <2>;
-- enable-method = "spin-table";
-- cpu-release-addr = <0x0 0x000000e8>;
-- };
--
-- cpu3: cpu@3 {
-- device_type = "cpu";
-- compatible = "arm,cortex-a72";
-- reg = <3>;
-- enable-method = "spin-table";
-- cpu-release-addr = <0x0 0x000000f0>;
-- };
-- };
--
-- v3dbus {
-- compatible = "simple-bus";
-- #address-cells = <1>;
-- #size-cells = <2>;
-- ranges = <0x7c500000 0x0 0xfc500000 0x0 0x03300000>,
-- <0x40000000 0x0 0xff800000 0x0 0x00800000>;
-- dma-ranges = <0x00000000 0x0 0x00000000 0x4 0x00000000>;
--
-- v3d: v3d@7ec04000 {
-- compatible = "brcm,2711-v3d";
-- reg =
-- <0x7ec00000 0x0 0x4000>,
-- <0x7ec04000 0x0 0x4000>;
-- reg-names = "hub", "core0";
--
-- power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
-- resets = <&pm BCM2835_RESET_V3D>;
-- clocks = <&clocks BCM2835_CLOCK_V3D>;
-- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-- status = "okay";
-- };
-- };
--
-- scb: scb {
-- compatible = "simple-bus";
-- #address-cells = <2>;
-- #size-cells = <1>;
--
-- ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>,
-- <0x0 0x40000000 0x0 0xff800000 0x00800000>,
-- <0x6 0x00000000 0x6 0x00000000 0x40000000>,
-- <0x0 0x00000000 0x0 0x00000000 0xfc000000>;
-- dma-ranges = <0x0 0x00000000 0x0 0x00000000 0xfc000000>;
--
-- pcie_0: pcie@7d500000 {
-- reg = <0x0 0x7d500000 0x9310>,
-- <0x0 0x7e00f300 0x20>;
-- msi-controller;
-- msi-parent = <&pcie_0>;
-- #address-cells = <3>;
-- #interrupt-cells = <1>;
-- #size-cells = <2>;
-- bus-range = <0x0 0x01>;
-- compatible = "brcm,bcm2711b0-pcie", // Safe value
-- "brcm,bcm2711-pcie",
-- "brcm,pci-plat-dev";
-- max-link-speed = <2>;
-- tot-num-pcie = <1>;
-- linux,pci-domain = <0>;
-- interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-- interrupt-names = "pcie", "msi";
-- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-- interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
-- IRQ_TYPE_LEVEL_HIGH
-- 0 0 0 2 &gicv2 GIC_SPI 144
-- IRQ_TYPE_LEVEL_HIGH
-- 0 0 0 3 &gicv2 GIC_SPI 145
-- IRQ_TYPE_LEVEL_HIGH
-- 0 0 0 4 &gicv2 GIC_SPI 146
-- IRQ_TYPE_LEVEL_HIGH>;
--
-- /* Map outbound accesses from scb:0x6_00000000-03ffffff
-- * to pci:0x0_f8000000-fbffffff
-- */
-- ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
-- 0x0 0x04000000>;
-- /* Map inbound accesses from pci:0x0_00000000..ffffffff
-- * to scb:0x0_00000000-ffffffff
-- */
-- dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
-- 0x1 0x00000000>;
-- status = "okay";
-- };
--
-- genet: ethernet@7d580000 {
-- compatible = "brcm,bcm2711-genet-v5", "brcm,genet-v5";
-- reg = <0x0 0x7d580000 0x10000>;
-- #address-cells = <0x1>;
-- #size-cells = <0x1>;
-- interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-- status = "disabled";
--
-- genet_mdio: mdio@e14 {
-- #address-cells = <0x0>;
-- #size-cells = <0x1>;
-- compatible = "brcm,genet-mdio-v5";
-- reg = <0xe14 0x8>;
-- reg-names = "mdio";
-- };
-- };
--
-- dma40: dma@7e007b00 {
-- compatible = "brcm,bcm2838-dma";
-- reg = <0x0 0x7e007b00 0x400>;
-- interrupts =
-- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, /* dma4 11 */
-- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, /* dma4 12 */
-- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, /* dma4 13 */
-- <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; /* dma4 14 */
-- interrupt-names = "dma11",
-- "dma12",
-- "dma13",
-- "dma14";
-- #dma-cells = <1>;
-- brcm,dma-channel-mask = <0x7800>;
-- };
-- /* DMA4 - 40 bit DMA engines */
--
-- xhci: xhci@7e9c0000 {
-- compatible = "generic-xhci";
-- status = "disabled";
-- reg = <0x0 0x7e9c0000 0x100000>;
-- interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-- };
--
-- hevc-decoder@7eb00000 {
-- compatible = "raspberrypi,rpivid-hevc-decoder";
-- reg = <0x0 0x7eb00000 0x10000>;
-- status = "okay";
-- };
--
-- rpivid-local-intc@7eb10000 {
-- compatible = "raspberrypi,rpivid-local-intc";
-- reg = <0x0 0x7eb10000 0x1000>;
-- status = "okay";
-- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-- };
--
-- h264-decoder@7eb20000 {
-- compatible = "raspberrypi,rpivid-h264-decoder";
-- reg = <0x0 0x7eb20000 0x10000>;
-- status = "okay";
-- };
--
-- vp9-decoder@7eb30000 {
-- compatible = "raspberrypi,rpivid-vp9-decoder";
-- reg = <0x0 0x7eb30000 0x10000>;
-- status = "okay";
-- };
-- };
--};
--
--&clk_osc {
-- clock-frequency = <54000000>;
--};
--
--&clocks {
-- compatible = "brcm,bcm2711-cprman";
--};
--
--&cpu_thermal {
-- coefficients = <(-487) 410040>;
--};
--
--&dsi0 {
-- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&dsi1 {
-- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&gpio {
-- compatible = "brcm,bcm2711-gpio", "brcm,bcm2835-gpio";
--
-- gpclk0_gpio49: gpclk0_gpio49 {
-- brcm,pins = <49>;
-- brcm,function = <BCM2835_FSEL_ALT1>;
-- brcm,pull = <BCM2835_PUD_OFF>;
-- };
-- gpclk1_gpio50: gpclk1_gpio50 {
-- brcm,pins = <50>;
-- brcm,function = <BCM2835_FSEL_ALT1>;
-- brcm,pull = <BCM2835_PUD_OFF>;
-- };
-- gpclk2_gpio51: gpclk2_gpio51 {
-- brcm,pins = <51>;
-- brcm,function = <BCM2835_FSEL_ALT1>;
-- brcm,pull = <BCM2835_PUD_OFF>;
-- };
--
-- i2c0_gpio46: i2c0_gpio46 {
-- brcm,pins = <46 47>;
-- brcm,function = <BCM2835_FSEL_ALT0>;
-- };
-- i2c1_gpio46: i2c1_gpio46 {
-- brcm,pins = <46 47>;
-- brcm,function = <BCM2835_FSEL_ALT1>;
-- };
-- i2c3_gpio2: i2c3_gpio2 {
-- brcm,pins = <2 3>;
-- brcm,function = <BCM2835_FSEL_ALT5>;
-- };
-- i2c3_gpio4: i2c3_gpio4 {
-- brcm,pins = <4 5>;
-- brcm,function = <BCM2835_FSEL_ALT5>;
-- };
-- i2c4_gpio6: i2c4_gpio6 {
-- brcm,pins = <6 7>;
-- brcm,function = <BCM2835_FSEL_ALT5>;
-- };
-- i2c4_gpio8: i2c4_gpio8 {
-- brcm,pins = <8 9>;
-- brcm,function = <BCM2835_FSEL_ALT5>;
-- };
-- i2c5_gpio10: i2c5_gpio10 {
-- brcm,pins = <10 11>;
-- brcm,function = <BCM2835_FSEL_ALT5>;
-- };
-- i2c5_gpio12: i2c5_gpio12 {
-- brcm,pins = <12 13>;
-- brcm,function = <BCM2835_FSEL_ALT5>;
-- };
-- i2c6_gpio0: i2c6_gpio0 {
-- brcm,pins = <0 1>;
-- brcm,function = <BCM2835_FSEL_ALT5>;
-- };
-- i2c6_gpio22: i2c6_gpio22 {
-- brcm,pins = <22 23>;
-- brcm,function = <BCM2835_FSEL_ALT5>;
-- };
-- i2c_slave_gpio8: i2c_slave_gpio8 {
-- brcm,pins = <8 9 10 11>;
-- brcm,function = <BCM2835_FSEL_ALT3>;
-- };
--
-- jtag_gpio48: jtag_gpio48 {
-- brcm,pins = <48 49 50 51 52 53>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- };
--
-- mii_gpio28: mii_gpio28 {
-- brcm,pins = <28 29 30 31>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- };
-- mii_gpio36: mii_gpio36 {
-- brcm,pins = <36 37 38 39>;
-- brcm,function = <BCM2835_FSEL_ALT5>;
-- };
--
-- pcm_gpio50: pcm_gpio50 {
-- brcm,pins = <50 51 52 53>;
-- brcm,function = <BCM2835_FSEL_ALT2>;
-- };
--
-- pwm0_gpio52: pwm0_gpio52 {
-- brcm,pins = <52>;
-- brcm,function = <BCM2835_FSEL_ALT1>;
-- brcm,pull = <BCM2835_PUD_OFF>;
-- };
-- pwm1_gpio53: pwm1_gpio53 {
-- brcm,pins = <53>;
-- brcm,function = <BCM2835_FSEL_ALT1>;
-- brcm,pull = <BCM2835_PUD_OFF>;
-- };
--
-- /* The following group consists of:
-- * RGMII_START_STOP
-- * RGMII_RX_OK
-- */
-- rgmii_gpio35: rgmii_gpio35 {
-- brcm,pins = <35 36>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- };
-- rgmii_irq_gpio34: rgmii_irq_gpio34 {
-- brcm,pins = <34>;
-- brcm,function = <BCM2835_FSEL_ALT5>;
-- };
-- rgmii_irq_gpio39: rgmii_irq_gpio39 {
-- brcm,pins = <39>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- };
-- rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
-- brcm,pins = <28 29>;
-- brcm,function = <BCM2835_FSEL_ALT5>;
-- };
-- rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
-- brcm,pins = <37 38>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- };
--
-- spi0_gpio46: spi0_gpio46 {
-- brcm,pins = <46 47 48 49>;
-- brcm,function = <BCM2835_FSEL_ALT2>;
-- };
-- spi2_gpio46: spi2_gpio46 {
-- brcm,pins = <46 47 48 49 50>;
-- brcm,function = <BCM2835_FSEL_ALT5>;
-- };
-- spi3_gpio0: spi3_gpio0 {
-- brcm,pins = <0 1 2 3>;
-- brcm,function = <BCM2835_FSEL_ALT3>;
-- };
-- spi4_gpio4: spi4_gpio4 {
-- brcm,pins = <4 5 6 7>;
-- brcm,function = <BCM2835_FSEL_ALT3>;
-- };
-- spi5_gpio12: spi5_gpio12 {
-- brcm,pins = <12 13 14 15>;
-- brcm,function = <BCM2835_FSEL_ALT3>;
-- };
-- spi6_gpio18: spi6_gpio18 {
-- brcm,pins = <18 19 20 21>;
-- brcm,function = <BCM2835_FSEL_ALT3>;
-- };
--
-- uart2_gpio0: uart2_gpio0 {
-- brcm,pins = <0 1>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-- };
-- uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
-- brcm,pins = <2 3>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-- };
-- uart3_gpio4: uart3_gpio4 {
-- brcm,pins = <4 5>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-- };
-- uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
-- brcm,pins = <6 7>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-- };
-- uart4_gpio8: uart4_gpio8 {
-- brcm,pins = <8 9>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-- };
-- uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
-- brcm,pins = <10 11>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-- };
-- uart5_gpio12: uart5_gpio12 {
-- brcm,pins = <12 13>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-- };
-- uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
-- brcm,pins = <14 15>;
-- brcm,function = <BCM2835_FSEL_ALT4>;
-- brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-- };
--};
--
--&vec {
-- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&usb {
-- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-- status = "disabled";
--};
--
--&hdmi {
-- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&uart1 {
-- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&spi1 {
-- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&spi2 {
-- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&csi0 {
-- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&csi1 {
-- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&sdhci {
-- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&i2c0 {
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&i2c1 {
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&i2c2 {
-- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&gpio {
-- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&mailbox {
-- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&rng {
-- compatible = "brcm,bcm2711-rng200", "brcm,bcm2838-rng200";
--};
--
--&sdhost {
-- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&system_timer {
-- interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&uart0 {
-- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
--};
--
--&dma {
-- reg = <0x7e007000 0xb00>;
-- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 7 */
-- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 8 */
-- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 9 */
-- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; /* dmalite 10 */
-- interrupt-names = "dma0",
-- "dma1",
-- "dma2",
-- "dma3",
-- "dma4",
-- "dma5",
-- "dma6",
-- "dma7",
-- "dma8",
-- "dma9",
-- "dma10";
-- brcm,dma-channel-mask = <0x07f5>;
--};
--
--&txp {
-- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
--};
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-23 04:30:13 +0000