aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.4/950-0411-overlays-Add-ssd1306-spi-ssh1106-spi-ssd-1351-spi.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0411-overlays-Add-ssd1306-spi-ssh1106-spi-ssd-1351-spi.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.4/950-0411-overlays-Add-ssd1306-spi-ssh1106-spi-ssd-1351-spi.patch353
1 files changed, 353 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0411-overlays-Add-ssd1306-spi-ssh1106-spi-ssd-1351-spi.patch b/target/linux/bcm27xx/patches-5.4/950-0411-overlays-Add-ssd1306-spi-ssh1106-spi-ssd-1351-spi.patch
new file mode 100644
index 0000000000..77bf63e2e2
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.4/950-0411-overlays-Add-ssd1306-spi-ssh1106-spi-ssd-1351-spi.patch
@@ -0,0 +1,353 @@
+From fe90ee51b283f7cbbce9980b76b3da8b31d39c60 Mon Sep 17 00:00:00 2001
+From: MikeDK <m.kaplan@evva.com>
+Date: Fri, 31 Jan 2020 10:57:21 +0100
+Subject: [PATCH] overlays: Add ssd1306-spi, ssh1106-spi, ssd-1351-spi
+
+Add overlays for SSD1306, SH1106 and SSD1351 based OLED displays.
+SH1106 is present in many 1.3 inch OLEDs and SSD1351 is present in
+1.5 inch RGB OLEDs from AliExpress.
+
+This will load the staging fbtft drivers.
+
+Signed-off-by: Michael Kaplan <m.kaplan@evva.com>
+---
+ arch/arm/boot/dts/overlays/Makefile | 3 +
+ arch/arm/boot/dts/overlays/README | 35 ++++++++
+ .../boot/dts/overlays/sh1106-spi-overlay.dts | 84 +++++++++++++++++++
+ .../boot/dts/overlays/ssd1306-spi-overlay.dts | 84 +++++++++++++++++++
+ .../boot/dts/overlays/ssd1351-spi-overlay.dts | 83 ++++++++++++++++++
+ 5 files changed, 289 insertions(+)
+ create mode 100644 arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts
+ create mode 100644 arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts
+ create mode 100644 arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -145,6 +145,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ sdhost.dtbo \
+ sdio.dtbo \
+ sdtweak.dtbo \
++ sh1106-spi.dtbo \
+ smi.dtbo \
+ smi-dev.dtbo \
+ smi-nand.dtbo \
+@@ -168,6 +169,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ spi6-1cs.dtbo \
+ spi6-2cs.dtbo \
+ ssd1306.dtbo \
++ ssd1306-spi.dtbo \
++ ssd1351-spi.dtbo \
+ superaudioboard.dtbo \
+ sx150x.dtbo \
+ tc358743.dtbo \
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -2145,6 +2145,18 @@ Params: overclock_50 Clock (i
+ (default on)
+
+
++Name: sh1106-spi
++Info: Overlay for SH1106 OLED via SPI using fbtft staging driver.
++Load: dtoverlay=sh1106-spi,<param>=<val>
++Params: speed SPI bus speed (default 4000000)
++ rotate Display rotation (0, 90, 180 or 270; default 0)
++ fps Delay between frame updates (default 25)
++ debug Debug output level (0-7; default 0)
++ dc_pin GPIO pin for D/C (default 24)
++ reset_pin GPIO pin for RESET (default 25)
++ height Display height (32 or 64; default 64)
++
++
+ Name: smi
+ Info: Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25!
+ Load: dtoverlay=smi
+@@ -2428,6 +2440,29 @@ Params: address Location
+ https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
+
+
++Name: ssd1306-spi
++Info: Overlay for SSD1306 OLED via SPI using fbtft staging driver.
++Load: dtoverlay=ssd1306-spi,<param>=<val>
++Params: speed SPI bus speed (default 10000000)
++ rotate Display rotation (0, 90, 180 or 270; default 0)
++ fps Delay between frame updates (default 25)
++ debug Debug output level (0-7; default 0)
++ dc_pin GPIO pin for D/C (default 24)
++ reset_pin GPIO pin for RESET (default 25)
++ height Display height (32 or 64; default 64)
++
++
++Name: ssd1351-spi
++Info: Overlay for SSD1351 OLED via SPI using fbtft staging driver.
++Load: dtoverlay=ssd1351-spi,<param>=<val>
++Params: speed SPI bus speed (default 4500000)
++ rotate Display rotation (0, 90, 180 or 270; default 0)
++ fps Delay between frame updates (default 25)
++ debug Debug output level (0-7; default 0)
++ dc_pin GPIO pin for D/C (default 24)
++ reset_pin GPIO pin for RESET (default 25)
++
++
+ Name: superaudioboard
+ Info: Configures the SuperAudioBoard sound card
+ Load: dtoverlay=superaudioboard,<param>=<val>
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts
+@@ -0,0 +1,84 @@
++/*
++ * Device Tree overlay for SH1106 based SPI OLED display
++ *
++ */
++
++/dts-v1/;
++/plugin/;
++
++/ {
++ compatible = "brcm,bcm2835";
++
++ fragment@0 {
++ target = <&spi0>;
++ __overlay__ {
++ status = "okay";
++ };
++ };
++
++ fragment@1 {
++ target = <&spidev0>;
++ __overlay__ {
++ status = "disabled";
++ };
++ };
++
++ fragment@2 {
++ target = <&spidev1>;
++ __overlay__ {
++ status = "disabled";
++ };
++ };
++
++ fragment@3 {
++ target = <&gpio>;
++ __overlay__ {
++ sh1106_pins: sh1106_pins {
++ brcm,pins = <25 24>;
++ brcm,function = <1 1>; /* out out */
++ };
++ };
++ };
++
++ fragment@4 {
++ target = <&spi0>;
++ __overlay__ {
++ /* needed to avoid dtc warning */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ sh1106: sh1106@0{
++ compatible = "sinowealth,sh1106";
++ reg = <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sh1106_pins>;
++
++ spi-max-frequency = <4000000>;
++ bgr = <0>;
++ bpp = <1>;
++ rotate = <0>;
++ fps = <25>;
++ buswidth = <8>;
++ reset-gpios = <&gpio 25 0>;
++ dc-gpios = <&gpio 24 0>;
++ debug = <0>;
++
++ sinowealth,height = <64>;
++ sinowealth,width = <128>;
++ sinowealth,page-offset = <0>;
++ };
++ };
++ };
++
++ __overrides__ {
++ speed = <&sh1106>,"spi-max-frequency:0";
++ rotate = <&sh1106>,"rotate:0";
++ fps = <&sh1106>,"fps:0";
++ debug = <&sh1106>,"debug:0";
++ dc_pin = <&sh1106>,"dc-gpios:4",
++ <&sh1106_pins>,"brcm,pins:4";
++ reset_pin = <&sh1106>,"reset-gpios:4",
++ <&sh1106_pins>,"brcm,pins:0";
++ height = <&sh1106>,"sinowealth,height:0";
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts
+@@ -0,0 +1,84 @@
++/*
++ * Device Tree overlay for SSD1306 based SPI OLED display
++ *
++ */
++
++/dts-v1/;
++/plugin/;
++
++/ {
++ compatible = "brcm,bcm2835";
++
++ fragment@0 {
++ target = <&spi0>;
++ __overlay__ {
++ status = "okay";
++ };
++ };
++
++ fragment@1 {
++ target = <&spidev0>;
++ __overlay__ {
++ status = "disabled";
++ };
++ };
++
++ fragment@2 {
++ target = <&spidev1>;
++ __overlay__ {
++ status = "disabled";
++ };
++ };
++
++ fragment@3 {
++ target = <&gpio>;
++ __overlay__ {
++ ssd1306_pins: ssd1306_pins {
++ brcm,pins = <25 24>;
++ brcm,function = <1 1>; /* out out */
++ };
++ };
++ };
++
++ fragment@4 {
++ target = <&spi0>;
++ __overlay__ {
++ /* needed to avoid dtc warning */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ ssd1306: ssd1306@0{
++ compatible = "solomon,ssd1306";
++ reg = <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&ssd1306_pins>;
++
++ spi-max-frequency = <10000000>;
++ bgr = <0>;
++ bpp = <1>;
++ rotate = <0>;
++ fps = <25>;
++ buswidth = <8>;
++ reset-gpios = <&gpio 25 0>;
++ dc-gpios = <&gpio 24 0>;
++ debug = <0>;
++
++ solomon,height = <64>;
++ solomon,width = <128>;
++ solomon,page-offset = <0>;
++ };
++ };
++ };
++
++ __overrides__ {
++ speed = <&ssd1306>,"spi-max-frequency:0";
++ rotate = <&ssd1306>,"rotate:0";
++ fps = <&ssd1306>,"fps:0";
++ debug = <&ssd1306>,"debug:0";
++ dc_pin = <&ssd1306>,"dc-gpios:4",
++ <&ssd1306_pins>,"brcm,pins:4";
++ reset_pin = <&ssd1306>,"reset-gpios:4",
++ <&ssd1306_pins>,"brcm,pins:0";
++ height = <&ssd1306>,"solomon,height:0";
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts
+@@ -0,0 +1,83 @@
++/*
++ * Device Tree overlay for SSD1351 based SPI OLED display
++ *
++ */
++
++/dts-v1/;
++/plugin/;
++
++/ {
++ compatible = "brcm,bcm2835";
++
++ fragment@0 {
++ target = <&spi0>;
++ __overlay__ {
++ status = "okay";
++ };
++ };
++
++ fragment@1 {
++ target = <&spidev0>;
++ __overlay__ {
++ status = "disabled";
++ };
++ };
++
++ fragment@2 {
++ target = <&spidev1>;
++ __overlay__ {
++ status = "disabled";
++ };
++ };
++
++ fragment@3 {
++ target = <&gpio>;
++ __overlay__ {
++ ssd1351_pins: ssd1351_pins {
++ brcm,pins = <25 24>;
++ brcm,function = <1 1>; /* out out */
++ };
++ };
++ };
++
++ fragment@4 {
++ target = <&spi0>;
++ __overlay__ {
++ /* needed to avoid dtc warning */
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ ssd1351: ssd1351@0{
++ compatible = "solomon,ssd1351";
++ reg = <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&ssd1351_pins>;
++
++ spi-max-frequency = <4500000>;
++ bgr = <0>;
++ bpp = <16>;
++ rotate = <0>;
++ fps = <25>;
++ buswidth = <8>;
++ reset-gpios = <&gpio 25 0>;
++ dc-gpios = <&gpio 24 0>;
++ debug = <0>;
++
++ solomon,height = <128>;
++ solomon,width = <128>;
++ solomon,page-offset = <0>;
++ };
++ };
++ };
++
++ __overrides__ {
++ speed = <&ssd1351>,"spi-max-frequency:0";
++ rotate = <&ssd1351>,"rotate:0";
++ fps = <&ssd1351>,"fps:0";
++ debug = <&ssd1351>,"debug:0";
++ dc_pin = <&ssd1351>,"dc-gpios:4",
++ <&ssd1351_pins>,"brcm,pins:4";
++ reset_pin = <&ssd1351>,"reset-gpios:4",
++ <&ssd1351_pins>,"brcm,pins:0";
++ };
++};