1 files changed, 0 insertions, 123 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0351-rpi-cirrus-wm5102-overlay-fix-pinctrl-configuration.patch b/target/linux/bcm27xx/patches-5.4/950-0351-rpi-cirrus-wm5102-overlay-fix-pinctrl-configuration.patch
deleted file mode 100644
index 61f49d5ae4..0000000000
--- a/target/linux/bcm27xx/patches-5.4/950-0351-rpi-cirrus-wm5102-overlay-fix-pinctrl-configuration.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From 01f45f7d4403e40f28f626296bec3ccae1b1f65b Mon Sep 17 00:00:00 2001
-From: Matthias Reichl <hias@horus.com>
-Date: Sat, 30 Nov 2019 23:10:26 +0100
-Subject: [PATCH] rpi-cirrus-wm5102-overlay: fix pinctrl configuration
-
-Separate GPIOs connected to wm5102 and wm8804 into 2 pinctrl
-blocks and properly reference them from the DT nodes to have
-correct pinmux owners.
-
-Setup spi0 to use only one CS line on GPIO7 so that GPIO8 is
-no longer claimed by spi0 but can be used by wm8804.
-
-Signed-off-by: Matthias Reichl <hias@horus.com>
----
- .../overlays/rpi-cirrus-wm5102-overlay.dts    | 40 ++++++++++++++-----
- 1 file changed, 30 insertions(+), 10 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts
-@@ -18,19 +18,31 @@
- 	fragment@1 {
- 		target = <&gpio>;
- 		__overlay__ {
--			wlf_pins: wlf_pins {
--				brcm,pins = <17 22 27 8>;
-+			wlf_5102_pins: wlf_5102_pins {
-+				brcm,pins = <17 22 27>;
- 				brcm,function = <
- 					BCM2835_FSEL_GPIO_OUT
- 					BCM2835_FSEL_GPIO_OUT
- 					BCM2835_FSEL_GPIO_IN
--					BCM2835_FSEL_GPIO_OUT
- 				>;
- 			};
-+			wlf_8804_pins: wlf_8804_pins {
-+				brcm,pins = <8>;
-+				brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-+			};
- 		};
- 	};
- 
- 	fragment@2 {
-+		target = <&spi0_cs_pins>;
-+		__overlay__ {
-+			brcm,pins = <7>;
-+			brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-+		};
-+	};
-+
-+
-+	fragment@3 {
- 		target-path = "/";
- 		__overlay__ {
- 			rpi_cirrus_reg_1v8: rpi_cirrus_reg_1v8 {
-@@ -43,30 +55,34 @@
- 		};
- 	};
- 
--	fragment@3 {
-+	fragment@4 {
- 		target = <&spidev0>;
- 		__overlay__ {
- 			status = "disabled";
- 		};
- 	};
- 
--	fragment@4 {
-+	fragment@5 {
- 		target = <&spidev1>;
- 		__overlay__ {
- 			status = "disabled";
- 		};
- 	};
- 
--	fragment@5 {
-+	fragment@6 {
- 		target = <&spi0>;
- 		__overlay__ {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			status = "okay";
-+			cs-gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- 
--			wm5102@1{
-+			wm5102@0{
- 				compatible = "wlf,wm5102";
--				reg = <1>;
-+				reg = <0>;
-+
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&wlf_5102_pins>;
- 
- 				spi-max-frequency = <500000>;
- 
-@@ -123,7 +139,7 @@
- 		};
- 	};
- 
--	fragment@6 {
-+	fragment@7 {
- 		target = <&i2c1>;
- 		__overlay__ {
- 			status = "okay";
-@@ -134,6 +150,10 @@
- 				compatible = "wlf,wm8804";
- 				reg = <0x3b>;
- 				status = "okay";
-+
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&wlf_8804_pins>;
-+
- 				PVDD-supply = <&vdd_3v3_reg>;
- 				DVDD-supply = <&vdd_3v3_reg>;
- 				wlf,reset-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
-@@ -141,7 +161,7 @@
- 		};
- 	};
- 
--	fragment@7 {
-+	fragment@8 {
- 		target = <&sound>;
- 		__overlay__ {
- 			compatible = "wlf,rpi-cirrus";