diff options
Diffstat (limited to 'target/linux/bcm27xx/patches-5.4/950-0053-BCM2708-Add-core-Device-Tree-support.patch')
-rw-r--r-- | target/linux/bcm27xx/patches-5.4/950-0053-BCM2708-Add-core-Device-Tree-support.patch | 22612 |
1 files changed, 0 insertions, 22612 deletions
diff --git a/target/linux/bcm27xx/patches-5.4/950-0053-BCM2708-Add-core-Device-Tree-support.patch b/target/linux/bcm27xx/patches-5.4/950-0053-BCM2708-Add-core-Device-Tree-support.patch deleted file mode 100644 index 89ce98a498..0000000000 --- a/target/linux/bcm27xx/patches-5.4/950-0053-BCM2708-Add-core-Device-Tree-support.patch +++ /dev/null @@ -1,22612 +0,0 @@ -From 1a6116aa1fc2a19a001fbffffb196bcc9f5d0e39 Mon Sep 17 00:00:00 2001 -From: notro <notro@tronnes.org> -Date: Wed, 9 Jul 2014 14:46:08 +0200 -Subject: [PATCH] BCM2708: Add core Device Tree support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add the bare minimum needed to boot BCM2708 from a Device Tree. - -Signed-off-by: Noralf Tronnes <notro@tronnes.org> - -BCM2708: DT: change 'axi' nodename to 'soc' - -Change DT node named 'axi' to 'soc' so it matches ARCH_BCM2835. -The VC4 bootloader fills in certain properties in the 'axi' subtree, -but since this is part of an upstreaming effort, the name is changed. - -Signed-off-by: Noralf Tronnes notro@tronnes.org - -BCM2708_DT: Correct length of the peripheral space - -Use dts-dirs feature for overlays. - -The kernel makefiles have a dts-dirs target that is for vendor subdirectories. - -Using this fixes the install_dtbs target, which previously did not install the overlays. - -BCM270X_DT: configure I2S DMA channels - -Signed-off-by: Matthias Reichl <hias@horus.com> - -BCM270X_DT: switch to bcm2835-i2s - -I2S soundcard drivers with proper devicetree support (i.e. not linking -to the cpu_dai/platform via name but to cpu/platform via of_node) -will work out of the box without any modifications. - -When the kernel is compiled without devicetree support the platform -code will instantiate the bcm2708-i2s driver and I2S soundcard drivers -will link to it via name, as before. - -Signed-off-by: Matthias Reichl <hias@horus.com> - -SDIO-overlay: add poll_once-boolean parameter - -Add paramter to toggle sdio-device-polling -done every second or once at boot-time. - -Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de> - -BCM270X_DT: Make mmc overlay compatible with current firmware - -The original DT overlay logic followed a merge-then-patch procedure, -i.e. parameters are applied to the loaded overlay before the overlay -is merged into the base DTB. This sequence has been changed to -patch-then-merge, in order to support parameterised node names, and -to protect against bad overlays. As a result, overrides (parameters) -must only target labels in the overlay, but the overlay can obviously target nodes in the base DTB. - -mmc-overlay.dts (that switches back to the original mmc sdcard -driver) is the only overlay violating that rule, and this patch -fixes it. - -bcm270x_dt: Use the sdhost MMC controller by default - -The "mmc" overlay reverts to using the other controller. - -squash: Add cprman to dt - -BCM270X_DT: Use clk_core for I2C interfaces - -BCM270X_DT: Use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi - -The mainline Device Tree files are quite close to downstream now. -Let's use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi as base files -for our dts files. - -Mainline dts files are based on these files: - - bcm2835-rpi.dtsi - bcm2835.dtsi bcm2836.dtsi - bcm283x.dtsi - -Current downstream are based on these: - - bcm2708.dtsi bcm2709.dtsi bcm2710.dtsi - bcm2708_common.dtsi - -This patch introduces this dependency: - - bcm2708.dtsi bcm2709.dtsi - bcm2708-rpi.dtsi - bcm270x.dtsi - bcm2835.dtsi bcm2836.dtsi - bcm283x.dtsi - -And: - bcm2710.dtsi - bcm2708-rpi.dtsi - bcm270x.dtsi - bcm283x.dtsi - -bcm270x.dtsi contains the downstream bcm283x.dtsi diff. -bcm2708-rpi.dtsi is the downstream version of bcm2835-rpi.dtsi. - -Other changes: -- The led node has moved from /soc/leds to /leds. This is not a problem - since the label is used to reference it. -- The clk_osc reg property changes from 6 to 3. -- The gpu nodes has their interrupt property set in the base file. -- the clocks label does not point to the /clocks node anymore, but - points to the cprman node. This is not a problem since the overlays - that use the clock node refer to it directly: target-path = "/clocks"; -- some nodes now have 2 labels since mainline and downstream differs in - this respect: cprman/clocks, spi0/spi, gpu/vc4. -- some nodes doesn't have an explicit status = "okay" since they're not - disabled in the base file: watchdog and random. -- gpiomem doesn't need an explicit status = "okay". -- bcm2708-rpi-cm.dts got the hpd-gpios property from bcm2708_common.dtsi, - it's now set directly in that file. -- bcm2709-rpi-2-b.dts has the timer node moved from /soc/timer to /timer. -- Removed clock-frequency property on the bcm{2709,2710}.dtsi timer nodes. - -Signed-off-by: Noralf Trønnes <noralf@tronnes.org> - -BCM270X_DT: Use raspberrypi-power to turn on USB power - -Use the raspberrypi-power driver to turn on USB power. - -Signed-off-by: Noralf Trønnes <noralf@tronnes.org> - -BCM270X_DT: Add a .dtbo target, use for overlays - -Change the filenames and extensions to keep the pre-DDT style of -overlay (<name>-overlay.dtb) distinct from new ones that use a -different style of local fixups (<name>.dtbo), and to match other -platforms. - -The RPi firmware uses the DDTK trailer atom to choose which type of -overlay to use for each kernel. - -Signed-off-by: Phil Elwell <phil@raspberrypi.org> - -BCM270X_DT: Don't generate "linux,phandle" props - -The EPAPR standard says to use "phandle" properties to store phandles, -rather than the deprecated "linux,phandle" version. By default, dtc -generates both, but adding "-H epapr" causes it to only generate -"phandle"s, saving some space and clutter. - -Signed-off-by: Phil Elwell <phil@raspberrypi.org> - -BCM270X_DT: Add overlay for enc28j60 on SPI2 - -Works on SPI2 for compute module - -BCM270X_DT: Add midi-uart0 overlay - -MIDI requires 31.25kbaud, a baudrate unsupported by Linux. The -midi-uart0 overlay configures uart0 (ttyAMA0) to use a fake clock -so that requesting 38.4kbaud actually gets 31.25kbaud. - -Signed-off-by: Phil Elwell <phil@raspberrypi.org> - -BCM270X_DT: Add i2c-sensor overlay - -The i2c-sensor overlay is a container for various pressure and -temperature sensors, currently bmp085 and bmp280. The standalone -bmp085_i2c-sensor overlay is now deprecated. - -Signed-off-by: Phil Elwell <phil@raspberrypi.org> - -BCM270X_DT: overlays/*-overlay.dtb -> overlays/*.dtbo (#1752) - -We now create overlays as .dtbo files. - -build: support for .dtbo files for dtb overlays - -Kernel 4.4.6+ on RaspberryPi support .dtbo files for overlays, instead of .dtb. -Patch the kernel, which has faulty rules to generate .dtbo the way yocto does - -Signed-off-by: Herve Jourdain <herve.jourdain@neuf.fr> -Signed-off-by: Khem Raj <raj.khem@gmail.com> - -BCM270X: Drop position requirement for CMA in VC4 overlay. - -No longer necessary since 2aefcd576195a739a7a256099571c9c4a401005f, -and will probably let peeople that want to choose a larger CMA -allocation (particularly on pi0/1). - -Signed-off-by: Eric Anholt <eric@anholt.net> - -BCM270X_DT: RPi Device Tree tidy - -Use the upstream sdhost node, add thermal-zones, and factor out some -common elements. - -Signed-off-by: Phil Elwell <phil@raspberrypi.org> - -kbuild: Silence unhelpful DTC warnings - -Signed-off-by: Phil Elwell <phil@raspberrypi.org> - -BCM270X_DT: DT build rules no longer arch-specific - -Signed-off-by: Phil Elwell <phil@raspberrypi.org> ---- - .gitignore | 1 + - arch/arm/boot/dts/Makefile | 25 + - arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 125 + - arch/arm/boot/dts/bcm2708-rpi-b.dts | 115 + - arch/arm/boot/dts/bcm2708-rpi-cm.dts | 98 + - arch/arm/boot/dts/bcm2708-rpi-cm.dtsi | 18 + - arch/arm/boot/dts/bcm2708-rpi-zero-w.dts | 163 ++ - arch/arm/boot/dts/bcm2708-rpi-zero.dts | 118 + - arch/arm/boot/dts/bcm2708-rpi.dtsi | 154 + - arch/arm/boot/dts/bcm2708.dtsi | 10 + - arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 125 + - arch/arm/boot/dts/bcm2709-rpi.dtsi | 5 + - arch/arm/boot/dts/bcm2709.dtsi | 18 + - arch/arm/boot/dts/bcm270x.dtsi | 165 ++ - arch/arm/boot/dts/bcm2710-rpi-2-b.dts | 125 + - arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 183 ++ - arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 194 ++ - arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 135 + - arch/arm/boot/dts/bcm2710.dtsi | 25 + - arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 338 +++ - arch/arm/boot/dts/bcm2711-rpi.dtsi | 7 + - arch/arm/boot/dts/bcm2711.dtsi | 44 + - arch/arm/boot/dts/bcm2835-common.dtsi | 54 + - arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 1 + - arch/arm/boot/dts/bcm2835-rpi-a.dts | 1 + - arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 + - arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 + - arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 + - arch/arm/boot/dts/bcm2835-rpi-zero.dts | 1 + - arch/arm/boot/dts/bcm2835-rpi.dtsi | 33 + - arch/arm/boot/dts/bcm2835.dtsi | 1 + - arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 + - arch/arm/boot/dts/bcm2836.dtsi | 1 + - arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 1 + - arch/arm/boot/dts/bcm2837.dtsi | 1 + - arch/arm/boot/dts/bcm2838-rpi-4-b.dts | 118 + - arch/arm/boot/dts/bcm2838-rpi.dtsi | 25 + - arch/arm/boot/dts/bcm2838.dtsi | 746 +++++ - arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi | 8 + - arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi | 8 + - arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi | 8 + - arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 15 + - arch/arm/boot/dts/bcm283x.dtsi | 76 +- - arch/arm/boot/dts/overlays/Makefile | 194 ++ - arch/arm/boot/dts/overlays/README | 2591 +++++++++++++++++ - .../arm/boot/dts/overlays/act-led-overlay.dts | 27 + - .../dts/overlays/adau1977-adc-overlay.dts | 40 + - .../dts/overlays/adau7002-simple-overlay.dts | 52 + - .../arm/boot/dts/overlays/ads1015-overlay.dts | 98 + - .../arm/boot/dts/overlays/ads1115-overlay.dts | 103 + - .../arm/boot/dts/overlays/ads7846-overlay.dts | 89 + - .../boot/dts/overlays/adv7282m-overlay.dts | 81 + - .../boot/dts/overlays/adv728x-m-overlay.dts | 37 + - .../overlays/akkordion-iqdacplus-overlay.dts | 49 + - .../allo-boss-dac-pcm512x-audio-overlay.dts | 59 + - .../dts/overlays/allo-digione-overlay.dts | 44 + - .../allo-katana-dac-audio-overlay.dts | 57 + - .../allo-piano-dac-pcm512x-audio-overlay.dts | 54 + - ...o-piano-dac-plus-pcm512x-audio-overlay.dts | 55 + - .../boot/dts/overlays/applepi-dac-overlay.dts | 57 + - .../boot/dts/overlays/at86rf233-overlay.dts | 57 + - .../overlays/audioinjector-addons-overlay.dts | 60 + - .../overlays/audioinjector-ultra-overlay.dts | 71 + - .../audioinjector-wm8731-audio-overlay.dts | 39 + - .../dts/overlays/audiosense-pi-overlay.dts | 82 + - .../boot/dts/overlays/audremap-overlay.dts | 35 + - .../boot/dts/overlays/balena-fin-overlay.dts | 122 + - .../overlays/bmp085_i2c-sensor-overlay.dts | 23 + - arch/arm/boot/dts/overlays/dht11-overlay.dts | 39 + - .../dts/overlays/dionaudio-loco-overlay.dts | 39 + - .../overlays/dionaudio-loco-v2-overlay.dts | 49 + - .../boot/dts/overlays/disable-bt-overlay.dts | 55 + - .../dts/overlays/disable-wifi-overlay.dts | 20 + - arch/arm/boot/dts/overlays/dpi18-overlay.dts | 39 + - arch/arm/boot/dts/overlays/dpi24-overlay.dts | 39 + - arch/arm/boot/dts/overlays/draws-overlay.dts | 200 ++ - .../arm/boot/dts/overlays/dwc-otg-overlay.dts | 14 + - arch/arm/boot/dts/overlays/dwc2-overlay.dts | 26 + - .../boot/dts/overlays/enc28j60-overlay.dts | 53 + - .../dts/overlays/enc28j60-spi2-overlay.dts | 47 + - .../arm/boot/dts/overlays/exc3000-overlay.dts | 48 + - .../boot/dts/overlays/fe-pi-audio-overlay.dts | 70 + - arch/arm/boot/dts/overlays/goodix-overlay.dts | 46 + - .../googlevoicehat-soundcard-overlay.dts | 49 + - .../boot/dts/overlays/gpio-fan-overlay.dts | 79 + - .../arm/boot/dts/overlays/gpio-ir-overlay.dts | 48 + - .../boot/dts/overlays/gpio-ir-tx-overlay.dts | 36 + - .../boot/dts/overlays/gpio-key-overlay.dts | 48 + - .../overlays/gpio-no-bank0-irq-overlay.dts | 14 + - .../boot/dts/overlays/gpio-no-irq-overlay.dts | 14 + - .../dts/overlays/gpio-poweroff-overlay.dts | 36 + - .../dts/overlays/gpio-shutdown-overlay.dts | 82 + - .../boot/dts/overlays/hd44780-lcd-overlay.dts | 46 + - .../dts/overlays/hifiberry-amp-overlay.dts | 39 + - .../dts/overlays/hifiberry-dac-overlay.dts | 34 + - .../overlays/hifiberry-dacplus-overlay.dts | 59 + - .../overlays/hifiberry-dacplusadc-overlay.dts | 71 + - .../hifiberry-dacplusadcpro-overlay.dts | 64 + - .../overlays/hifiberry-dacplusdsp-overlay.dts | 34 + - .../dts/overlays/hifiberry-digi-overlay.dts | 41 + - .../overlays/hifiberry-digi-pro-overlay.dts | 43 + - arch/arm/boot/dts/overlays/hy28a-overlay.dts | 93 + - .../boot/dts/overlays/hy28b-2017-overlay.dts | 152 + - arch/arm/boot/dts/overlays/hy28b-overlay.dts | 148 + - .../boot/dts/overlays/i-sabre-q2m-overlay.dts | 39 + - .../boot/dts/overlays/i2c-bcm2708-overlay.dts | 13 + - .../boot/dts/overlays/i2c-gpio-overlay.dts | 45 + - .../arm/boot/dts/overlays/i2c-mux-overlay.dts | 139 + - .../dts/overlays/i2c-pwm-pca9685a-overlay.dts | 26 + - .../dts/overlays/i2c-rtc-gpio-overlay.dts | 244 ++ - .../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 225 ++ - .../boot/dts/overlays/i2c-sensor-overlay.dts | 239 ++ - .../dts/overlays/i2c0-bcm2708-overlay.dts | 14 + - arch/arm/boot/dts/overlays/i2c0-overlay.dts | 61 + - .../dts/overlays/i2c1-bcm2708-overlay.dts | 9 + - arch/arm/boot/dts/overlays/i2c1-overlay.dts | 44 + - arch/arm/boot/dts/overlays/i2c3-overlay.dts | 36 + - arch/arm/boot/dts/overlays/i2c4-overlay.dts | 36 + - arch/arm/boot/dts/overlays/i2c5-overlay.dts | 36 + - arch/arm/boot/dts/overlays/i2c6-overlay.dts | 36 + - .../dts/overlays/i2s-gpio28-31-overlay.dts | 18 + - .../boot/dts/overlays/ilitek251x-overlay.dts | 45 + - arch/arm/boot/dts/overlays/imx219-overlay.dts | 129 + - .../dts/overlays/iqaudio-codec-overlay.dts | 42 + - .../boot/dts/overlays/iqaudio-dac-overlay.dts | 46 + - .../dts/overlays/iqaudio-dacplus-overlay.dts | 49 + - .../iqaudio-digi-wm8804-audio-overlay.dts | 47 + - .../arm/boot/dts/overlays/irs1125-overlay.dts | 97 + - .../dts/overlays/jedec-spi-nor-overlay.dts | 309 ++ - .../dts/overlays/justboom-dac-overlay.dts | 46 + - .../dts/overlays/justboom-digi-overlay.dts | 41 + - .../arm/boot/dts/overlays/ltc294x-overlay.dts | 86 + - .../boot/dts/overlays/max98357a-overlay.dts | 84 + - .../boot/dts/overlays/mbed-dac-overlay.dts | 64 + - .../boot/dts/overlays/mcp23017-overlay.dts | 71 + - .../boot/dts/overlays/mcp23s17-overlay.dts | 732 +++++ - .../dts/overlays/mcp2515-can0-overlay.dts | 73 + - .../dts/overlays/mcp2515-can1-overlay.dts | 73 + - .../arm/boot/dts/overlays/mcp3008-overlay.dts | 205 ++ - .../arm/boot/dts/overlays/mcp3202-overlay.dts | 205 ++ - .../arm/boot/dts/overlays/mcp342x-overlay.dts | 93 + - .../dts/overlays/media-center-overlay.dts | 134 + - .../boot/dts/overlays/midi-uart0-overlay.dts | 36 + - .../boot/dts/overlays/midi-uart1-overlay.dts | 43 + - .../boot/dts/overlays/miniuart-bt-overlay.dts | 74 + - arch/arm/boot/dts/overlays/mmc-overlay.dts | 46 + - .../arm/boot/dts/overlays/mpu6050-overlay.dts | 28 + - .../arm/boot/dts/overlays/mz61581-overlay.dts | 117 + - arch/arm/boot/dts/overlays/ov5647-overlay.dts | 99 + - .../arm/boot/dts/overlays/papirus-overlay.dts | 89 + - .../boot/dts/overlays/pi3-act-led-overlay.dts | 1 + - .../dts/overlays/pi3-disable-bt-overlay.dts | 1 + - .../dts/overlays/pi3-disable-wifi-overlay.dts | 1 + - .../dts/overlays/pi3-miniuart-bt-overlay.dts | 1 + - arch/arm/boot/dts/overlays/pibell-overlay.dts | 81 + - arch/arm/boot/dts/overlays/piglow-overlay.dts | 97 + - .../boot/dts/overlays/piscreen-overlay.dts | 102 + - .../boot/dts/overlays/piscreen2r-overlay.dts | 106 + - .../arm/boot/dts/overlays/pisound-overlay.dts | 120 + - .../arm/boot/dts/overlays/pitft22-overlay.dts | 69 + - .../overlays/pitft28-capacitive-overlay.dts | 91 + - .../overlays/pitft28-resistive-overlay.dts | 119 + - .../overlays/pitft35-resistive-overlay.dts | 119 + - .../boot/dts/overlays/pps-gpio-overlay.dts | 38 + - .../boot/dts/overlays/pwm-2chan-overlay.dts | 47 + - .../boot/dts/overlays/pwm-ir-tx-overlay.dts | 40 + - arch/arm/boot/dts/overlays/pwm-overlay.dts | 43 + - .../arm/boot/dts/overlays/qca7000-overlay.dts | 55 + - .../dts/overlays/rotary-encoder-overlay.dts | 59 + - .../dts/overlays/rpi-backlight-overlay.dts | 21 + - .../overlays/rpi-cirrus-wm5102-overlay.dts | 152 + - .../arm/boot/dts/overlays/rpi-dac-overlay.dts | 34 + - .../boot/dts/overlays/rpi-display-overlay.dts | 91 + - .../boot/dts/overlays/rpi-ft5406-overlay.dts | 25 + - .../arm/boot/dts/overlays/rpi-poe-overlay.dts | 70 + - .../boot/dts/overlays/rpi-proto-overlay.dts | 39 + - .../boot/dts/overlays/rpi-sense-overlay.dts | 47 + - arch/arm/boot/dts/overlays/rpi-tv-overlay.dts | 34 + - .../rra-digidac1-wm8741-audio-overlay.dts | 49 + - .../dts/overlays/sc16is750-i2c-overlay.dts | 38 + - .../dts/overlays/sc16is752-i2c-overlay.dts | 40 + - .../dts/overlays/sc16is752-spi1-overlay.dts | 61 + - arch/arm/boot/dts/overlays/sdhost-overlay.dts | 38 + - arch/arm/boot/dts/overlays/sdio-overlay.dts | 77 + - .../arm/boot/dts/overlays/sdtweak-overlay.dts | 25 + - .../arm/boot/dts/overlays/smi-dev-overlay.dts | 18 + - .../boot/dts/overlays/smi-nand-overlay.dts | 66 + - arch/arm/boot/dts/overlays/smi-overlay.dts | 37 + - .../dts/overlays/spi-gpio35-39-overlay.dts | 31 + - .../dts/overlays/spi-gpio40-45-overlay.dts | 36 + - .../arm/boot/dts/overlays/spi-rtc-overlay.dts | 33 + - .../arm/boot/dts/overlays/spi0-cs-overlay.dts | 29 + - .../boot/dts/overlays/spi0-hw-cs-overlay.dts | 26 + - .../boot/dts/overlays/spi1-1cs-overlay.dts | 57 + - .../boot/dts/overlays/spi1-2cs-overlay.dts | 69 + - .../boot/dts/overlays/spi1-3cs-overlay.dts | 81 + - .../boot/dts/overlays/spi2-1cs-overlay.dts | 57 + - .../boot/dts/overlays/spi2-2cs-overlay.dts | 69 + - .../boot/dts/overlays/spi2-3cs-overlay.dts | 81 + - .../boot/dts/overlays/spi3-1cs-overlay.dts | 44 + - .../boot/dts/overlays/spi3-2cs-overlay.dts | 56 + - .../boot/dts/overlays/spi4-1cs-overlay.dts | 44 + - .../boot/dts/overlays/spi4-2cs-overlay.dts | 56 + - .../boot/dts/overlays/spi5-1cs-overlay.dts | 44 + - .../boot/dts/overlays/spi5-2cs-overlay.dts | 56 + - .../boot/dts/overlays/spi6-1cs-overlay.dts | 44 + - .../boot/dts/overlays/spi6-2cs-overlay.dts | 56 + - .../arm/boot/dts/overlays/ssd1306-overlay.dts | 36 + - .../dts/overlays/superaudioboard-overlay.dts | 73 + - arch/arm/boot/dts/overlays/sx150x-overlay.dts | 1706 +++++++++++ - .../dts/overlays/tc358743-audio-overlay.dts | 52 + - .../boot/dts/overlays/tc358743-overlay.dts | 116 + - .../boot/dts/overlays/tinylcd35-overlay.dts | 222 ++ - .../boot/dts/overlays/tpm-slb9670-overlay.dts | 44 + - arch/arm/boot/dts/overlays/uart0-overlay.dts | 33 + - arch/arm/boot/dts/overlays/uart1-overlay.dts | 38 + - arch/arm/boot/dts/overlays/uart2-overlay.dts | 27 + - arch/arm/boot/dts/overlays/uart3-overlay.dts | 27 + - arch/arm/boot/dts/overlays/uart4-overlay.dts | 27 + - arch/arm/boot/dts/overlays/uart5-overlay.dts | 27 + - arch/arm/boot/dts/overlays/udrc-overlay.dts | 128 + - .../boot/dts/overlays/upstream-overlay.dts | 131 + - .../dts/overlays/vc4-fkms-v3d-overlay.dts | 81 + - .../overlays/vc4-kms-kippah-7inch-overlay.dts | 43 + - .../boot/dts/overlays/vc4-kms-v3d-overlay.dts | 152 + - arch/arm/boot/dts/overlays/vga666-overlay.dts | 30 + - .../arm/boot/dts/overlays/w1-gpio-overlay.dts | 40 + - .../dts/overlays/w1-gpio-pullup-overlay.dts | 42 + - arch/arm/boot/dts/overlays/w5500-overlay.dts | 63 + - .../arm/boot/dts/overlays/wittypi-overlay.dts | 44 + - arch/arm64/boot/dts/Makefile | 2 + - arch/arm64/boot/dts/broadcom/Makefile | 11 + - .../dts/broadcom/bcm2710-rpi-3-b-plus.dts | 3 + - .../boot/dts/broadcom/bcm2710-rpi-3-b.dts | 3 + - .../boot/dts/broadcom/bcm2710-rpi-cm3.dts | 3 + - .../boot/dts/broadcom/bcm2711-rpi-4-b.dts | 3 + - .../dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi | 1 + - .../dts/broadcom/bcm283x-rpi-lan7515.dtsi | 1 + - arch/arm64/boot/dts/overlays | 1 + - scripts/Makefile.dtbinst | 8 +- - scripts/Makefile.lib | 13 + - 241 files changed, 20250 insertions(+), 48 deletions(-) - create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b-plus.dts - create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b.dts - create mode 100644 arch/arm/boot/dts/bcm2708-rpi-cm.dts - create mode 100644 arch/arm/boot/dts/bcm2708-rpi-cm.dtsi - create mode 100644 arch/arm/boot/dts/bcm2708-rpi-zero-w.dts - create mode 100644 arch/arm/boot/dts/bcm2708-rpi-zero.dts - create mode 100644 arch/arm/boot/dts/bcm2708-rpi.dtsi - create mode 100644 arch/arm/boot/dts/bcm2708.dtsi - create mode 100644 arch/arm/boot/dts/bcm2709-rpi-2-b.dts - create mode 100644 arch/arm/boot/dts/bcm2709-rpi.dtsi - create mode 100644 arch/arm/boot/dts/bcm2709.dtsi - create mode 100644 arch/arm/boot/dts/bcm270x.dtsi - create mode 100644 arch/arm/boot/dts/bcm2710-rpi-2-b.dts - create mode 100644 arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts - create mode 100644 arch/arm/boot/dts/bcm2710-rpi-3-b.dts - create mode 100644 arch/arm/boot/dts/bcm2710-rpi-cm3.dts - create mode 100644 arch/arm/boot/dts/bcm2710.dtsi - create mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts - create mode 100644 arch/arm/boot/dts/bcm2711-rpi.dtsi - create mode 100644 arch/arm/boot/dts/bcm2711.dtsi - create mode 100644 arch/arm/boot/dts/bcm2835-common.dtsi - create mode 100644 arch/arm/boot/dts/bcm2838-rpi-4-b.dts - create mode 100644 arch/arm/boot/dts/bcm2838-rpi.dtsi - create mode 100644 arch/arm/boot/dts/bcm2838.dtsi - create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi - create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi - create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi - create mode 100644 arch/arm/boot/dts/overlays/Makefile - create mode 100644 arch/arm/boot/dts/overlays/README - create mode 100644 arch/arm/boot/dts/overlays/act-led-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/ads1015-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/ads1115-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/ads7846-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/adv7282m-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/adv728x-m-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/allo-digione-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/applepi-dac-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/at86rf233-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/audremap-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/balena-fin-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dht11-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/disable-bt-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/disable-wifi-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dpi18-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dpi24-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/draws-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dwc-otg-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/dwc2-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/enc28j60-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/exc3000-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/goodix-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/gpio-fan-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/gpio-ir-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/gpio-key-overlay.dts - create mode 100755 arch/arm/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/gpio-no-irq-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hd44780-lcd-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hy28a-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/hy28b-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-mux-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c0-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c1-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c3-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c4-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c5-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2c6-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/ilitek251x-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/imx219-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/irs1125-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/justboom-dac-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/justboom-digi-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/ltc294x-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/max98357a-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mbed-dac-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mcp23017-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mcp23s17-overlay.dts - create mode 100755 arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts - create mode 100755 arch/arm/boot/dts/overlays/mcp3008-overlay.dts - create mode 100755 arch/arm/boot/dts/overlays/mcp3202-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mcp342x-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/media-center-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/midi-uart0-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/midi-uart1-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mmc-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mpu6050-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/mz61581-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/ov5647-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/papirus-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pibell-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/piglow-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/piscreen-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/piscreen2r-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pisound-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pitft22-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pps-gpio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pwm-ir-tx-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/pwm-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/qca7000-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-dac-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-display-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-poe-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-proto-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-sense-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rpi-tv-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sdhost-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sdio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sdtweak-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/smi-dev-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/smi-nand-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/smi-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi-gpio40-45-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi-rtc-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi0-cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/ssd1306-overlay.dts - create mode 100755 arch/arm/boot/dts/overlays/superaudioboard-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/sx150x-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/tc358743-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/tinylcd35-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts - create mode 100755 arch/arm/boot/dts/overlays/uart0-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/uart1-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/uart2-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/uart3-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/uart4-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/uart5-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/udrc-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/upstream-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/vga666-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/w1-gpio-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/w5500-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/wittypi-overlay.dts - create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts - create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts - create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts - create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts - create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi - create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi - create mode 120000 arch/arm64/boot/dts/overlays - -diff --git a/.gitignore b/.gitignore -index 70580bdd352c..a0cf56d7d0d2 100644 ---- a/.gitignore -+++ b/.gitignore -@@ -17,6 +17,7 @@ - *.c.[012]*.* - *.dt.yaml - *.dtb -+*.dtbo - *.dtb.S - *.dwo - *.elf -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index b21b3a64641a..e6832866849d 100644 ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -1,4 +1,18 @@ - # SPDX-License-Identifier: GPL-2.0 -+ -+dtb-$(CONFIG_ARCH_BCM2835) += \ -+ bcm2708-rpi-b.dtb \ -+ bcm2708-rpi-b-plus.dtb \ -+ bcm2708-rpi-cm.dtb \ -+ bcm2708-rpi-zero.dtb \ -+ bcm2708-rpi-zero-w.dtb \ -+ bcm2709-rpi-2-b.dtb \ -+ bcm2710-rpi-2-b.dtb \ -+ bcm2710-rpi-3-b.dtb \ -+ bcm2711-rpi-4-b.dtb \ -+ bcm2710-rpi-3-b-plus.dtb \ -+ bcm2710-rpi-cm3.dtb -+ - dtb-$(CONFIG_ARCH_ALPINE) += \ - alpine-db.dtb - dtb-$(CONFIG_MACH_ARTPEC6) += \ -@@ -83,6 +97,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ - bcm2837-rpi-3-b.dtb \ - bcm2837-rpi-3-b-plus.dtb \ - bcm2837-rpi-cm3-io3.dtb \ -+ bcm2838-rpi-4-b.dtb \ - bcm2835-rpi-zero.dtb \ - bcm2835-rpi-zero-w.dtb - dtb-$(CONFIG_ARCH_BCM_5301X) += \ -@@ -1303,3 +1318,13 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ - aspeed-bmc-opp-zaius.dtb \ - aspeed-bmc-portwell-neptune.dtb \ - aspeed-bmc-quanta-q71l.dtb -+ -+targets += dtbs dtbs_install -+targets += $(dtb-y) -+ -+subdir-y := overlays -+ -+# Enable fixups to support overlays on BCM2835 platforms -+ifeq ($(CONFIG_ARCH_BCM2835),y) -+ DTC_FLAGS ?= -@ -+endif -diff --git a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -new file mode 100644 -index 000000000000..b800699a03fb ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -@@ -0,0 +1,125 @@ -+/dts-v1/; -+ -+#include "bcm2708.dtsi" -+#include "bcm2708-rpi.dtsi" -+#include "bcm283x-rpi-smsc9514.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; -+ model = "Raspberry Pi Model B+"; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 45>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+ -+ pwr_led: pwr { -+ label = "led1"; -+ linux,default-trigger = "input"; -+ gpios = <&gpio 35 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ pwr_led_gpio = <&pwr_led>,"gpios:4"; -+ pwr_led_activelow = <&pwr_led>,"gpios:8"; -+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2708-rpi-b.dts b/arch/arm/boot/dts/bcm2708-rpi-b.dts -new file mode 100644 -index 000000000000..ef47775692ce ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts -@@ -0,0 +1,115 @@ -+/dts-v1/; -+ -+#include "bcm2708.dtsi" -+#include "bcm2708-rpi.dtsi" -+#include "bcm283x-rpi-smsc9512.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,model-b", "brcm,bcm2835"; -+ model = "Raspberry Pi Model B"; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <28 29 30 31>; -+ brcm,function = <6>; /* alt2 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 45>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 16 1>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2708-rpi-cm.dts b/arch/arm/boot/dts/bcm2708-rpi-cm.dts -new file mode 100644 -index 000000000000..64809aee5c0c ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts -@@ -0,0 +1,98 @@ -+/dts-v1/; -+ -+#include "bcm2708-rpi-cm.dtsi" -+#include "bcm283x-rpi-csi0-2lane.dtsi" -+#include "bcm283x-rpi-csi1-4lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,compute-module", "brcm,bcm2835"; -+ model = "Raspberry Pi Compute Module"; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins; -+ brcm,function; -+ }; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; -+}; -diff --git a/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi -new file mode 100644 -index 000000000000..dce160f420fd ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi -@@ -0,0 +1,18 @@ -+#include "bcm2708.dtsi" -+#include "bcm2708-rpi.dtsi" -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts -new file mode 100644 -index 000000000000..92f780a3e557 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts -@@ -0,0 +1,163 @@ -+/dts-v1/; -+ -+#include "bcm2708.dtsi" -+#include "bcm2708-rpi.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; -+ model = "Raspberry Pi Zero W"; -+ -+ chosen { -+ bootargs = "coherent_pool=1M 8250.nr_uarts=1"; -+ }; -+ -+ aliases { -+ serial0 = &uart1; -+ serial1 = &uart0; -+ mmc1 = &mmcnr; -+ }; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ sdio_pins: sdio_pins { -+ brcm,pins = <34 35 36 37 38 39>; -+ brcm,function = <7>; /* ALT3 = SD1 */ -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ -+ bt_pins: bt_pins { -+ brcm,pins = <43>; -+ brcm,function = <4>; /* alt0:GPCLK2 */ -+ brcm,pull = <0>; /* none */ -+ }; -+ -+ uart0_pins: uart0_pins { -+ brcm,pins = <30 31 32 33>; -+ brcm,function = <7>; /* alt3=UART0 */ -+ brcm,pull = <2 0 0 2>; /* up none none up */ -+ }; -+ -+ uart1_pins: uart1_pins { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <>; -+ brcm,function = <>; -+ }; -+}; -+ -+&mmcnr { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins &bt_pins>; -+ status = "okay"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2708-rpi-zero.dts b/arch/arm/boot/dts/bcm2708-rpi-zero.dts -new file mode 100644 -index 000000000000..2909ddeafc83 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi-zero.dts -@@ -0,0 +1,118 @@ -+/dts-v1/; -+ -+#include "bcm2708.dtsi" -+#include "bcm2708-rpi.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,model-zero", "brcm,bcm2835"; -+ model = "Raspberry Pi Zero"; -+ -+ chosen { -+ bootargs = "coherent_pool=1M"; -+ }; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <>; -+ brcm,function = <>; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2708-rpi.dtsi b/arch/arm/boot/dts/bcm2708-rpi.dtsi -new file mode 100644 -index 000000000000..ce9795dad99f ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi -@@ -0,0 +1,154 @@ -+/* Downstream modifications to bcm2835-rpi.dtsi */ -+ -+#include "bcm2835-rpi.dtsi" -+ -+/ { -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x0 0x0>; -+ }; -+ -+ aliases { -+ audio = &audio; -+ aux = &aux; -+ sound = &sound; -+ soc = &soc; -+ dma = &dma; -+ intc = &intc; -+ watchdog = &watchdog; -+ random = &random; -+ mailbox = &mailbox; -+ gpio = &gpio; -+ uart0 = &uart0; -+ sdhost = &sdhost; -+ mmc0 = &sdhost; -+ i2s = &i2s; -+ spi0 = &spi0; -+ i2c0 = &i2c0; -+ uart1 = &uart1; -+ spi1 = &spi1; -+ spi2 = &spi2; -+ mmc = &mmc; -+ mmc1 = &mmc; -+ i2c1 = &i2c1; -+ i2c2 = &i2c2; -+ usb = &usb; -+ leds = &leds; -+ fb = &fb; -+ thermal = &thermal; -+ axiperf = &axiperf; -+ }; -+ -+ leds: leds { -+ compatible = "gpio-leds"; -+ }; -+ -+ soc { -+ gpiomem { -+ compatible = "brcm,bcm2835-gpiomem"; -+ reg = <0x7e200000 0x1000>; -+ }; -+ -+ fb: fb { -+ compatible = "brcm,bcm2708-fb"; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; -+ -+ vcsm: vcsm { -+ compatible = "raspberrypi,bcm2835-vcsm"; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; -+ -+ /* Onboard audio */ -+ audio: audio { -+ compatible = "brcm,bcm2835-audio"; -+ brcm,pwm-channels = <8>; -+ status = "disabled"; -+ }; -+ -+ /* External sound card */ -+ sound: sound { -+ status = "disabled"; -+ }; -+ }; -+ -+ __overrides__ { -+ cache_line_size; -+ -+ uart0 = <&uart0>,"status"; -+ uart1 = <&uart1>,"status"; -+ i2s = <&i2s>,"status"; -+ spi = <&spi0>,"status"; -+ i2c0 = <&i2c0>,"status"; -+ i2c1 = <&i2c1>,"status"; -+ i2c2_iknowwhatimdoing = <&i2c2>,"status"; -+ i2c0_baudrate = <&i2c0>,"clock-frequency:0"; -+ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; -+ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; -+ -+ audio = <&audio>,"status"; -+ watchdog = <&watchdog>,"status"; -+ random = <&random>,"status"; -+ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; -+ sd_force_pio = <&sdhost>,"brcm,force-pio?"; -+ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; -+ sd_debug = <&sdhost>,"brcm,debug"; -+ sdio_overclock = <&mmc>,"brcm,overclock-50:0", -+ <&mmcnr>,"brcm,overclock-50:0"; -+ axiperf = <&axiperf>,"status"; -+ }; -+}; -+ -+&hdmi { -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "disabled"; -+}; -+ -+&txp { -+ status = "disabled"; -+}; -+ -+&i2c0 { -+ status = "disabled"; -+}; -+ -+&i2c1 { -+ status = "disabled"; -+}; -+ -+&i2c2 { -+ status = "disabled"; -+}; -+ -+&clocks { -+ firmware = <&firmware>; -+}; -+ -+&sdhci { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emmc_gpio48>; -+ bus-width = <4>; -+}; -+ -+sdhost_pins: &sdhost_gpio48 { -+ /* Add alias */ -+}; -+ -+&sdhost { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdhost_gpio48>; -+ bus-width = <4>; -+ brcm,overclock-50 = <0>; -+ brcm,pio-limit = <1>; -+ status = "okay"; -+}; -+ -+&cpu_thermal { -+ /delete-node/ trips; -+}; -+ -+&vec { -+ status = "disabled"; -+}; -diff --git a/arch/arm/boot/dts/bcm2708.dtsi b/arch/arm/boot/dts/bcm2708.dtsi -new file mode 100644 -index 000000000000..16a637363b5d ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2708.dtsi -@@ -0,0 +1,10 @@ -+#include "bcm2835.dtsi" -+#include "bcm270x.dtsi" -+ -+/ { -+ /delete-node/ cpus; -+ -+ __overrides__ { -+ arm_freq; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -new file mode 100644 -index 000000000000..4d2262f8d376 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -@@ -0,0 +1,125 @@ -+/dts-v1/; -+ -+#include "bcm2709.dtsi" -+#include "bcm2709-rpi.dtsi" -+#include "bcm283x-rpi-smsc9514.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; -+ model = "Raspberry Pi 2 Model B"; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 45>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+ -+ pwr_led: pwr { -+ label = "led1"; -+ linux,default-trigger = "input"; -+ gpios = <&gpio 35 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ pwr_led_gpio = <&pwr_led>,"gpios:4"; -+ pwr_led_activelow = <&pwr_led>,"gpios:8"; -+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2709-rpi.dtsi b/arch/arm/boot/dts/bcm2709-rpi.dtsi -new file mode 100644 -index 000000000000..babfa41cd9f7 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2709-rpi.dtsi -@@ -0,0 +1,5 @@ -+#include "bcm2708-rpi.dtsi" -+ -+&vchiq { -+ compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq"; -+}; -diff --git a/arch/arm/boot/dts/bcm2709.dtsi b/arch/arm/boot/dts/bcm2709.dtsi -new file mode 100644 -index 000000000000..8bc67c0aaff1 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2709.dtsi -@@ -0,0 +1,18 @@ -+#include "bcm2836.dtsi" -+#include "bcm270x.dtsi" -+ -+/ { -+ soc { -+ ranges = <0x7e000000 0x3f000000 0x01000000>, -+ <0x40000000 0x40000000 0x00040000>; -+ -+ /delete-node/ timer@7e003000; -+ }; -+ -+ __overrides__ { -+ arm_freq = <&v7_cpu0>, "clock-frequency:0", -+ <&v7_cpu1>, "clock-frequency:0", -+ <&v7_cpu2>, "clock-frequency:0", -+ <&v7_cpu3>, "clock-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm270x.dtsi b/arch/arm/boot/dts/bcm270x.dtsi -new file mode 100644 -index 000000000000..9eb6becfbe41 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -0,0 +1,165 @@ -+/* Downstream bcm283x.dtsi diff */ -+#include <dt-bindings/power/raspberrypi-power.h> -+ -+/ { -+ chosen { -+ bootargs = "coherent_pool=1M"; -+ /delete-property/ stdout-path; -+ }; -+ -+ soc: soc { -+ -+ watchdog: watchdog@7e100000 { -+ /* Add label */ -+ }; -+ -+ random: rng@7e104000 { -+ /* Add label */ -+ }; -+ -+ gpio@7e200000 { /* gpio */ -+ interrupts = <2 17>, <2 18>; -+ -+ dpi_18bit_gpio0: dpi_18bit_gpio0 { -+ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 -+ 12 13 14 15 16 17 18 19 -+ 20 21>; -+ brcm,function = <BCM2835_FSEL_ALT2>; -+ }; -+ }; -+ -+ serial@7e201000 { /* uart0 */ -+ /* Enable CTS bug workaround */ -+ cts-event-workaround; -+ }; -+ -+ i2s@7e203000 { /* i2s */ -+ #sound-dai-cells = <0>; -+ reg = <0x7e203000 0x24>; -+ clocks = <&clocks BCM2835_CLOCK_PCM>; -+ }; -+ -+ spi0: spi@7e204000 { -+ /* Add label */ -+ dmas = <&dma 6>, <&dma 7>; -+ dma-names = "tx", "rx"; -+ }; -+ -+ pixelvalve0: pixelvalve@7e206000 { -+ /* Add label */ -+ status = "disabled"; -+ }; -+ -+ pixelvalve1: pixelvalve@7e207000 { -+ /* Add label */ -+ status = "disabled"; -+ }; -+ -+ dpi: dpi@7e208000 { -+ compatible = "brcm,bcm2835-dpi"; -+ reg = <0x7e208000 0x8c>; -+ clocks = <&clocks BCM2835_CLOCK_VPU>, -+ <&clocks BCM2835_CLOCK_DPI>; -+ clock-names = "core", "pixel"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ /delete-node/ sdhci@7e300000; -+ -+ sdhci: mmc: mmc@7e300000 { -+ compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci"; -+ reg = <0x7e300000 0x100>; -+ interrupts = <2 30>; -+ clocks = <&clocks BCM2835_CLOCK_EMMC>; -+ dmas = <&dma 11>; -+ dma-names = "rx-tx"; -+ brcm,overclock-50 = <0>; -+ status = "disabled"; -+ }; -+ -+ /* A clone of mmc but with non-removable set */ -+ mmcnr: mmcnr@7e300000 { -+ compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci"; -+ reg = <0x7e300000 0x100>; -+ interrupts = <2 30>; -+ clocks = <&clocks BCM2835_CLOCK_EMMC>; -+ dmas = <&dma 11>; -+ dma-names = "rx-tx"; -+ brcm,overclock-50 = <0>; -+ non-removable; -+ status = "disabled"; -+ }; -+ -+ hvs: hvs@7e400000 { -+ /* Add label */ -+ status = "disabled"; -+ }; -+ -+ firmwarekms: firmwarekms@7e600000 { -+ compatible = "raspberrypi,rpi-firmware-kms"; -+ /* SMI interrupt reg */ -+ reg = <0x7e600000 0x100>; -+ interrupts = <2 16>; -+ brcm,firmware = <&firmware>; -+ status = "disabled"; -+ }; -+ -+ smi: smi@7e600000 { -+ compatible = "brcm,bcm2835-smi"; -+ reg = <0x7e600000 0x100>; -+ interrupts = <2 16>; -+ clocks = <&clocks BCM2835_CLOCK_SMI>; -+ assigned-clocks = <&clocks BCM2835_CLOCK_SMI>; -+ assigned-clock-rates = <125000000>; -+ dmas = <&dma 4>; -+ dma-names = "rx-tx"; -+ status = "disabled"; -+ }; -+ -+ pixelvalve2: pixelvalve@7e807000 { -+ /* Add label */ -+ status = "disabled"; -+ }; -+ -+ hdmi@7e902000 { /* hdmi */ -+ status = "disabled"; -+ }; -+ -+ usb@7e980000 { /* usb */ -+ compatible = "brcm,bcm2708-usb"; -+ reg = <0x7e980000 0x10000>, -+ <0x7e006000 0x1000>; -+ interrupt-names = "usb", -+ "soft"; -+ interrupts = <1 9>, -+ <2 0>; -+ }; -+ -+ v3d@7ec00000 { /* vd3 */ -+ compatible = "brcm,vc4-v3d"; -+ power-domains = <&power RPI_POWER_DOMAIN_V3D>; -+ status = "disabled"; -+ }; -+ -+ axiperf: axiperf { -+ compatible = "brcm,bcm2835-axiperf"; -+ reg = <0x7e009800 0x100>, -+ <0x7ee08000 0x100>; -+ firmware = <&firmware>; -+ status = "disabled"; -+ }; -+ }; -+ -+ __overrides__ { -+ cam0-pwdn-ctrl; -+ cam0-pwdn; -+ cam0-led-ctrl; -+ cam0-led; -+ }; -+}; -+ -+&vc4 { -+ status = "disabled"; -+}; -diff --git a/arch/arm/boot/dts/bcm2710-rpi-2-b.dts b/arch/arm/boot/dts/bcm2710-rpi-2-b.dts -new file mode 100644 -index 000000000000..65a6f4d06866 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2710-rpi-2-b.dts -@@ -0,0 +1,125 @@ -+/dts-v1/; -+ -+#include "bcm2710.dtsi" -+#include "bcm2709-rpi.dtsi" -+#include "bcm283x-rpi-smsc9514.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837"; -+ model = "Raspberry Pi 2 Model B rev 1.2"; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 45>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 47 0>; -+ }; -+ -+ pwr_led: pwr { -+ label = "led1"; -+ linux,default-trigger = "input"; -+ gpios = <&gpio 35 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ pwr_led_gpio = <&pwr_led>,"gpios:4"; -+ pwr_led_activelow = <&pwr_led>,"gpios:8"; -+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -new file mode 100644 -index 000000000000..55420ac94dcf ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts -@@ -0,0 +1,183 @@ -+/dts-v1/; -+ -+#include "bcm2710.dtsi" -+#include "bcm2709-rpi.dtsi" -+#include "bcm283x-rpi-lan7515.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837"; -+ model = "Raspberry Pi 3 Model B+"; -+ -+ chosen { -+ bootargs = "coherent_pool=1M 8250.nr_uarts=1"; -+ }; -+ -+ aliases { -+ serial0 = &uart1; -+ serial1 = &uart0; -+ mmc1 = &mmcnr; -+ }; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ sdio_pins: sdio_pins { -+ brcm,pins = <34 35 36 37 38 39>; -+ brcm,function = <7>; // alt3 = SD1 -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ -+ bt_pins: bt_pins { -+ brcm,pins = <43>; -+ brcm,function = <4>; /* alt0:GPCLK2 */ -+ brcm,pull = <0>; -+ }; -+ -+ uart0_pins: uart0_pins { -+ brcm,pins = <32 33>; -+ brcm,function = <7>; /* alt3=UART0 */ -+ brcm,pull = <0 2>; -+ }; -+ -+ uart1_pins: uart1_pins { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 41>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&mmcnr { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&firmware { -+ expgpio: expgpio { -+ compatible = "raspberrypi,firmware-gpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ status = "okay"; -+ }; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins &bt_pins>; -+ status = "okay"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 29 0>; -+ }; -+ -+ pwr_led: pwr { -+ label = "led1"; -+ linux,default-trigger = "default-on"; -+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ pwr_led_gpio = <&pwr_led>,"gpios:4"; -+ pwr_led_activelow = <&pwr_led>,"gpios:8"; -+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -new file mode 100644 -index 000000000000..261827cdb957 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -@@ -0,0 +1,194 @@ -+/dts-v1/; -+ -+#include "bcm2710.dtsi" -+#include "bcm2709-rpi.dtsi" -+#include "bcm283x-rpi-smsc9514.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; -+ model = "Raspberry Pi 3 Model B"; -+ -+ chosen { -+ bootargs = "coherent_pool=1M 8250.nr_uarts=1"; -+ }; -+ -+ aliases { -+ serial0 = &uart1; -+ serial1 = &uart0; -+ mmc1 = &mmcnr; -+ }; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ sdio_pins: sdio_pins { -+ brcm,pins = <34 35 36 37 38 39>; -+ brcm,function = <7>; // alt3 = SD1 -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ -+ bt_pins: bt_pins { -+ brcm,pins = <43>; -+ brcm,function = <4>; /* alt0:GPCLK2 */ -+ brcm,pull = <0>; -+ }; -+ -+ uart0_pins: uart0_pins { -+ brcm,pins = <32 33>; -+ brcm,function = <7>; /* alt3=UART0 */ -+ brcm,pull = <0 2>; -+ }; -+ -+ uart1_pins: uart1_pins { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 41>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&mmcnr { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&soc { -+ virtgpio: virtgpio { -+ compatible = "brcm,bcm2835-virtgpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; -+ -+}; -+ -+&firmware { -+ expgpio: expgpio { -+ compatible = "raspberrypi,firmware-gpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ status = "okay"; -+ }; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins &bt_pins>; -+ status = "okay"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&virtgpio 0 0>; -+ }; -+ -+ pwr_led: pwr { -+ label = "led1"; -+ linux,default-trigger = "input"; -+ gpios = <&expgpio 7 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ pwr_led_gpio = <&pwr_led>,"gpios:4"; -+ pwr_led_activelow = <&pwr_led>,"gpios:8"; -+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -new file mode 100644 -index 000000000000..addebe448e32 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts -@@ -0,0 +1,135 @@ -+/dts-v1/; -+ -+#include "bcm2710.dtsi" -+#include "bcm2709-rpi.dtsi" -+#include "bcm283x-rpi-csi0-2lane.dtsi" -+#include "bcm283x-rpi-csi1-4lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,3-compute-module", "brcm,bcm2837"; -+ model = "Raspberry Pi Compute Module 3"; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <1>; /* output */ -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins; -+ brcm,function; -+ }; -+}; -+ -+&soc { -+ virtgpio: virtgpio { -+ compatible = "brcm,bcm2835-virtgpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; -+ -+}; -+ -+&firmware { -+ expgpio: expgpio { -+ compatible = "raspberrypi,firmware-gpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ status = "okay"; -+ }; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&virtgpio 0 0>; -+ }; -+}; -+ -+&hdmi { -+ hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2710.dtsi b/arch/arm/boot/dts/bcm2710.dtsi -new file mode 100644 -index 000000000000..5c45ded273fe ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2710.dtsi -@@ -0,0 +1,25 @@ -+#include "bcm2837.dtsi" -+#include "bcm270x.dtsi" -+ -+/ { -+ compatible = "brcm,bcm2837", "brcm,bcm2836"; -+ -+ arm-pmu { -+#ifdef RPI364 -+ compatible = "arm,armv8-pmuv3", "arm,cortex-a7-pmu"; -+#else -+ compatible = "arm,cortex-a7-pmu"; -+#endif -+ }; -+ -+ soc { -+ /delete-node/ timer@7e003000; -+ }; -+ -+ __overrides__ { -+ arm_freq = <&cpu0>, "clock-frequency:0", -+ <&cpu1>, "clock-frequency:0", -+ <&cpu2>, "clock-frequency:0", -+ <&cpu3>, "clock-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -new file mode 100644 -index 000000000000..ccdc274665c0 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -@@ -0,0 +1,338 @@ -+/dts-v1/; -+ -+#include "bcm2711.dtsi" -+#include "bcm2711-rpi.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" -+ -+/ { -+ compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; -+ model = "Raspberry Pi 4 Model B"; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x0 0x0 0x0>; -+ }; -+ -+ chosen { -+ bootargs = "coherent_pool=1M 8250.nr_uarts=1 cma=64M"; -+ }; -+ -+ aliases { -+ serial0 = &uart1; -+ serial1 = &uart0; -+ mmc0 = &emmc2; -+ mmc1 = &mmcnr; -+ mmc2 = &sdhost; -+ i2c3 = &i2c3; -+ i2c4 = &i2c4; -+ i2c5 = &i2c5; -+ i2c6 = &i2c6; -+ /delete-property/ ethernet; -+ /delete-property/ intc; -+ ethernet0 = &genet; -+ }; -+}; -+ -+&soc { -+ virtgpio: virtgpio { -+ compatible = "brcm,bcm2835-virtgpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; -+}; -+ -+&mmcnr { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&firmware { -+ expgpio: gpio { -+ compatible = "raspberrypi,firmware-gpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ gpio-line-names = "BT_ON", -+ "WL_ON", -+ "PWR_LED_OFF", -+ "GLOBAL_RESET", -+ "VDD_SD_IO_SEL", -+ "CAM_GPIO", -+ "", -+ ""; -+ status = "okay"; -+ }; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins &bt_pins>; -+ status = "okay"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ -+ spidev0: spidev@0{ -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+ -+ spidev1: spidev@1{ -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ }; -+}; -+ -+// ============================================= -+// Board specific stuff here -+ -+/ { -+ -+ sd_io_1v8_reg: sd_io_1v8_reg { -+ status = "okay"; -+ compatible = "regulator-gpio"; -+ vin-supply = <&vdd_5v0_reg>; -+ regulator-name = "vdd-sd-io"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-boot-on; -+ regulator-always-on; -+ regulator-settling-time-us = <5000>; -+ -+ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; -+ states = <1800000 0x1 -+ 3300000 0x0>; -+ }; -+}; -+ -+&sdhost { -+ status = "disabled"; -+}; -+ -+&emmc2 { -+ status = "okay"; -+ broken-cd; -+ vqmmc-supply = <&sd_io_1v8_reg>; -+}; -+ -+&leds { -+ act_led: act { -+ label = "led0"; -+ linux,default-trigger = "mmc0"; -+ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ pwr_led: pwr { -+ label = "led1"; -+ linux,default-trigger = "default-on"; -+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; -+ }; -+}; -+ -+&audio { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&audio_pins>; -+}; -+ -+&sdhost_gpio48 { -+ brcm,pins = <22 23 24 25 26 27>; -+ brcm,function = <BCM2835_FSEL_ALT0>; -+}; -+ -+&gpio { -+ spi0_pins: spi0_pins { -+ brcm,pins = <9 10 11>; -+ brcm,function = <BCM2835_FSEL_ALT0>; -+ }; -+ -+ spi0_cs_pins: spi0_cs_pins { -+ brcm,pins = <8 7>; -+ brcm,function = <BCM2835_FSEL_GPIO_OUT>; -+ }; -+ -+ spi3_pins: spi3_pins { -+ brcm,pins = <1 2 3>; -+ brcm,function = <BCM2835_FSEL_ALT3>; -+ }; -+ -+ spi3_cs_pins: spi3_cs_pins { -+ brcm,pins = <0 24>; -+ brcm,function = <BCM2835_FSEL_GPIO_OUT>; -+ }; -+ -+ spi4_pins: spi4_pins { -+ brcm,pins = <5 6 7>; -+ brcm,function = <BCM2835_FSEL_ALT3>; -+ }; -+ -+ spi4_cs_pins: spi4_cs_pins { -+ brcm,pins = <4 25>; -+ brcm,function = <BCM2835_FSEL_GPIO_OUT>; -+ }; -+ -+ spi5_pins: spi5_pins { -+ brcm,pins = <13 14 15>; -+ brcm,function = <BCM2835_FSEL_ALT3>; -+ }; -+ -+ spi5_cs_pins: spi5_cs_pins { -+ brcm,pins = <12 26>; -+ brcm,function = <BCM2835_FSEL_GPIO_OUT>; -+ }; -+ -+ spi6_pins: spi6_pins { -+ brcm,pins = <19 20 21>; -+ brcm,function = <BCM2835_FSEL_ALT3>; -+ }; -+ -+ spi6_cs_pins: spi6_cs_pins { -+ brcm,pins = <18 27>; -+ brcm,function = <BCM2835_FSEL_GPIO_OUT>; -+ }; -+ -+ i2c0_pins: i2c0 { -+ brcm,pins = <0 1>; -+ brcm,function = <BCM2835_FSEL_ALT0>; -+ brcm,pull = <BCM2835_PUD_UP>; -+ }; -+ -+ i2c1_pins: i2c1 { -+ brcm,pins = <2 3>; -+ brcm,function = <BCM2835_FSEL_ALT0>; -+ brcm,pull = <BCM2835_PUD_UP>; -+ }; -+ -+ i2c3_pins: i2c3 { -+ brcm,pins = <4 5>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ brcm,pull = <BCM2835_PUD_UP>; -+ }; -+ -+ i2c4_pins: i2c4 { -+ brcm,pins = <8 9>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ brcm,pull = <BCM2835_PUD_UP>; -+ }; -+ -+ i2c5_pins: i2c5 { -+ brcm,pins = <12 13>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ brcm,pull = <BCM2835_PUD_UP>; -+ }; -+ -+ i2c6_pins: i2c6 { -+ brcm,pins = <22 23>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ brcm,pull = <BCM2835_PUD_UP>; -+ }; -+ -+ i2s_pins: i2s { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <BCM2835_FSEL_ALT0>; -+ }; -+ -+ sdio_pins: sdio_pins { -+ brcm,pins = <34 35 36 37 38 39>; -+ brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1 -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ -+ bt_pins: bt_pins { -+ brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0 -+ // to fool pinctrl -+ brcm,function = <0>; -+ brcm,pull = <2>; -+ }; -+ -+ uart0_pins: uart0_pins { -+ brcm,pins = <32 33>; -+ brcm,function = <BCM2835_FSEL_ALT3>; -+ brcm,pull = <0 2>; -+ }; -+ -+ uart1_pins: uart1_pins { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ -+ uart2_pins: uart2_pins { -+ brcm,pins = <0 1>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ brcm,pull = <0 2>; -+ }; -+ -+ uart3_pins: uart3_pins { -+ brcm,pins = <4 5>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ brcm,pull = <0 2>; -+ }; -+ -+ uart4_pins: uart4_pins { -+ brcm,pins = <8 9>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ brcm,pull = <0 2>; -+ }; -+ -+ uart5_pins: uart5_pins { -+ brcm,pins = <12 13>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ brcm,pull = <0 2>; -+ }; -+ -+ audio_pins: audio_pins { -+ brcm,pins = <40 41>; -+ brcm,function = <4>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ clock-frequency = <100000>; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+}; -+ -+&i2s { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2s_pins>; -+}; -+ -+/ { -+ __overrides__ { -+ act_led_gpio = <&act_led>,"gpios:4"; -+ act_led_activelow = <&act_led>,"gpios:8"; -+ act_led_trigger = <&act_led>,"linux,default-trigger"; -+ -+ pwr_led_gpio = <&pwr_led>,"gpios:4"; -+ pwr_led_activelow = <&pwr_led>,"gpios:8"; -+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi -new file mode 100644 -index 000000000000..d8ffaab8e86a ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi -@@ -0,0 +1,7 @@ -+#include "bcm2708-rpi.dtsi" -+#include "bcm2838-rpi.dtsi" -+ -+&v3d { -+ /* Undo the overwriting by bcm270x.dtsi */ -+ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; -+}; -diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi -new file mode 100644 -index 000000000000..f134aba2badb ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2711.dtsi -@@ -0,0 +1,44 @@ -+#include "bcm2838.dtsi" -+#include "bcm270x.dtsi" -+ -+/ { -+ soc { -+ /delete-node/ v3d@7ec00000; -+ }; -+ -+ __overrides__ { -+ arm_freq; -+ }; -+}; -+ -+&v3d { -+ status = "disabled"; -+}; -+ -+&firmwarekms { -+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&smi { -+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&mmc { -+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&mmcnr { -+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&usb { -+ reg = <0x7e980000 0x10000>, -+ <0x7e00b200 0x200>; -+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&gpio { -+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; -+}; -diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi -new file mode 100644 -index 000000000000..eceb170fd5b7 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2835-common.dtsi -@@ -0,0 +1,54 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+/* This include file covers the common peripherals and configuration between -+ * bcm2835, bcm2836 and bcm2837 implementations. -+ */ -+ -+/ { -+ soc { -+ timer@7e003000 { -+ compatible = "brcm,bcm2835-system-timer"; -+ reg = <0x7e003000 0x1000>; -+ interrupts = <1 0>, <1 1>, <1 2>, <1 3>; -+ /* This could be a reference to BCM2835_CLOCK_TIMER, -+ * but we don't have the driver using the common clock -+ * support yet. -+ */ -+ clock-frequency = <1000000>; -+ }; -+ -+ intc: interrupt-controller@7e00b200 { -+ compatible = "brcm,bcm2835-armctrl-ic"; -+ reg = <0x7e00b200 0x200>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ }; -+ -+ thermal: thermal@7e212000 { -+ compatible = "brcm,bcm2835-thermal"; -+ reg = <0x7e212000 0x8>; -+ clocks = <&clocks BCM2835_CLOCK_TSENS>; -+ #thermal-sensor-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ v3d: v3d@7ec00000 { -+ compatible = "brcm,bcm2835-v3d"; -+ reg = <0x7ec00000 0x1000>; -+ interrupts = <1 10>; -+ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; -+ }; -+ }; -+}; -+ -+&gpio { -+ i2c_slave_gpio18: i2c_slave_gpio18 { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <BCM2835_FSEL_ALT3>; -+ }; -+ -+ jtag_gpio4: jtag_gpio4 { -+ brcm,pins = <4 5 6 12 13>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts -index 6c8ce39833bf..0cc6355a8c06 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts -@@ -3,6 +3,7 @@ - #include "bcm2835.dtsi" - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-a-plus", "brcm,bcm2835"; -diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts -index 17fdd48346ff..21593978e851 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi-a.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts -@@ -3,6 +3,7 @@ - #include "bcm2835.dtsi" - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-a", "brcm,bcm2835"; -diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts -index b0355c229cdc..7c63ba90b827 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts -@@ -4,6 +4,7 @@ - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; -diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts -index 33b3b5c02521..83e54a5fa3b4 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts -@@ -4,6 +4,7 @@ - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-smsc9512.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; -diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts -index 2b69957e0113..c9d04b1f14fd 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi-b.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts -@@ -4,6 +4,7 @@ - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-smsc9512.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-b", "brcm,bcm2835"; -diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts -index 6dd93c6f4966..42ce8b606354 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts -@@ -7,6 +7,7 @@ - #include "bcm2835.dtsi" - #include "bcm2835-rpi.dtsi" - #include "bcm283x-rpi-usb-otg.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,model-zero", "brcm,bcm2835"; -diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi -index 6c6a7f620d8b..c77971e27175 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi -@@ -29,6 +29,22 @@ - interrupts = <0 2>; - }; - }; -+ -+ vdd_3v3_reg: fixedregulator_3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ vdd_5v0_reg: fixedregulator_5v0 { -+ compatible = "regulator-fixed"; -+ regulator-name = "5v0"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; - }; - - &gpio { -@@ -67,6 +83,15 @@ - power-domains = <&power RPI_POWER_DOMAIN_USB>; - }; - -+&hdmi { -+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; -+ status = "okay"; -+}; -+ -+&v3d { -+ power-domains = <&power RPI_POWER_DOMAIN_V3D>; -+}; -+ - &vec { - power-domains = <&power RPI_POWER_DOMAIN_VEC>; - status = "okay"; -@@ -79,3 +104,11 @@ - &dsi1 { - power-domains = <&power RPI_POWER_DOMAIN_DSI1>; - }; -+ -+&csi0 { -+ power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>; -+}; -+ -+&csi1 { -+ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>; -+}; -diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi -index a5c3824c8056..53bf4579cc22 100644 ---- a/arch/arm/boot/dts/bcm2835.dtsi -+++ b/arch/arm/boot/dts/bcm2835.dtsi -@@ -1,5 +1,6 @@ - // SPDX-License-Identifier: GPL-2.0 - #include "bcm283x.dtsi" -+#include "bcm2835-common.dtsi" - - / { - compatible = "brcm,bcm2835"; -diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts -index 0455a680394a..6b0a6d5d5ca4 100644 ---- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts -+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts -@@ -4,6 +4,7 @@ - #include "bcm2836-rpi.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; -diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi -index c933e8413884..82d6c4662ae4 100644 ---- a/arch/arm/boot/dts/bcm2836.dtsi -+++ b/arch/arm/boot/dts/bcm2836.dtsi -@@ -1,5 +1,6 @@ - // SPDX-License-Identifier: GPL-2.0 - #include "bcm283x.dtsi" -+#include "bcm2835-common.dtsi" - - / { - compatible = "brcm,bcm2836"; -diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -index 054ecaa355c9..3d03e7d0fbf0 100644 ---- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -@@ -4,6 +4,7 @@ - #include "bcm2836-rpi.dtsi" - #include "bcm283x-rpi-smsc9514.dtsi" - #include "bcm283x-rpi-usb-host.dtsi" -+#include "bcm283x-rpi-csi1-2lane.dtsi" - - / { - compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; -diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi -index beb6c502dadc..9e95fee78e19 100644 ---- a/arch/arm/boot/dts/bcm2837.dtsi -+++ b/arch/arm/boot/dts/bcm2837.dtsi -@@ -1,4 +1,5 @@ - #include "bcm283x.dtsi" -+#include "bcm2835-common.dtsi" - - / { - compatible = "brcm,bcm2837"; -diff --git a/arch/arm/boot/dts/bcm2838-rpi-4-b.dts b/arch/arm/boot/dts/bcm2838-rpi-4-b.dts -new file mode 100644 -index 000000000000..7170a97bd3e4 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2838-rpi-4-b.dts -@@ -0,0 +1,118 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/dts-v1/; -+#include "bcm2838.dtsi" -+#include "bcm2835-rpi.dtsi" -+#include "bcm2838-rpi.dtsi" -+ -+/ { -+ compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; -+ model = "Raspberry Pi 4 Model B"; -+ -+ chosen { -+ /* 8250 auxiliary UART instead of pl011 */ -+ stdout-path = "serial1:115200n8"; -+ }; -+ -+ memory@0 { -+ reg = <0 0 0x40000000>; -+ }; -+ -+ leds { -+ act { -+ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ pwr { -+ label = "PWR"; -+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ wifi_pwrseq: wifi-pwrseq { -+ compatible = "mmc-pwrseq-simple"; -+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; -+ }; -+ -+ sd_io_1v8_reg: sd_io_1v8_reg { -+ status = "okay"; -+ compatible = "regulator-gpio"; -+ vin-supply = <&vdd_5v0_reg>; -+ regulator-name = "vdd-sd-io"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-boot-on; -+ regulator-always-on; -+ regulator-settling-time-us = <5000>; -+ -+ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; -+ states = <1800000 0x1 -+ 3300000 0x0>; -+ }; -+}; -+ -+&firmware { -+ expgpio: gpio { -+ compatible = "raspberrypi,firmware-gpio"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ gpio-line-names = "BT_ON", -+ "WL_ON", -+ "PWR_LED_OFF", -+ "GLOBAL_RESET", -+ "VDD_SD_IO_SEL", -+ "CAM_GPIO", -+ "", -+ ""; -+ status = "okay"; -+ }; -+}; -+ -+&pwm1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; -+ status = "okay"; -+}; -+ -+/* SDHCI is used to control the SDIO for wireless */ -+&sdhci { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emmc_gpio34>; -+ status = "okay"; -+ bus-width = <4>; -+ non-removable; -+ mmc-pwrseq = <&wifi_pwrseq>; -+ -+ brcmf: wifi@1 { -+ reg = <1>; -+ compatible = "brcm,bcm4329-fmac"; -+ }; -+}; -+ -+/* EMMC2 is used to drive the SD card */ -+&emmc2 { -+ status = "okay"; -+ broken-cd; -+ vqmmc-supply = <&sd_io_1v8_reg>; -+}; -+ -+/* uart0 communicates with the BT module */ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; -+ status = "okay"; -+ -+ bluetooth { -+ compatible = "brcm,bcm43438-bt"; -+ max-speed = <2000000>; -+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; -+ }; -+}; -+ -+/* uart1 is mapped to the pin header */ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_gpio14>; -+ status = "okay"; -+}; -diff --git a/arch/arm/boot/dts/bcm2838-rpi.dtsi b/arch/arm/boot/dts/bcm2838-rpi.dtsi -new file mode 100644 -index 000000000000..140cfa312d1a ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2838-rpi.dtsi -@@ -0,0 +1,25 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+/ { -+ soc { -+ /delete-node/ mailbox@7e00b840; -+ }; -+}; -+ -+&scb { -+ vchiq: mailbox@7e00b840 { -+ compatible = "brcm,bcm2838-vchiq"; -+ reg = <0 0x7e00b840 0x3c>; -+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; -+ }; -+}; -+ -+&dma { -+ /* The VPU firmware uses DMA channel 11 for VCHIQ */ -+ brcm,dma-channel-mask = <0x1f5>; -+}; -+ -+&dma40 { -+ /* The VPU firmware DMA channel 11 for VCHIQ */ -+ brcm,dma-channel-mask = <0x7000>; -+}; -diff --git a/arch/arm/boot/dts/bcm2838.dtsi b/arch/arm/boot/dts/bcm2838.dtsi -new file mode 100644 -index 000000000000..a8614cc3ad6a ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2838.dtsi -@@ -0,0 +1,746 @@ -+// SPDX-License-Identifier: GPL-2.0 -+#include "bcm283x.dtsi" -+ -+#include <dt-bindings/interrupt-controller/arm-gic.h> -+#include <dt-bindings/soc/bcm2835-pm.h> -+ -+/ { -+ compatible = "brcm,bcm2838"; -+ -+ #address-cells = <2>; -+ #size-cells = <1>; -+ -+ interrupt-parent = <&gicv2>; -+ -+ soc { -+ ranges = <0x7e000000 0x0 0xfe000000 0x01800000>, -+ <0x7c000000 0x0 0xfc000000 0x02000000>, -+ <0x40000000 0x0 0xff800000 0x00800000>; -+ /* Emulate a contiguous 30-bit address range for DMA */ -+ dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>; -+ -+ /delete-node/ interrupt-controller@7e00f300; -+ /delete-node/ v3d@7ec00000; -+ -+ local_intc: local_intc@40000000 { -+ compatible = "brcm,bcm2836-l1-intc"; -+ reg = <0x40000000 0x100>; -+ }; -+ -+ gicv2: gic400@40041000 { -+ interrupt-controller; -+ #interrupt-cells = <3>; -+ compatible = "arm,gic-400"; -+ reg = <0x40041000 0x1000>, -+ <0x40042000 0x2000>, -+ <0x40044000 0x2000>, -+ <0x40046000 0x2000>; -+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | -+ IRQ_TYPE_LEVEL_HIGH)>; -+ }; -+ -+ thermal: thermal@7d5d2200 { -+ compatible = "brcm,avs-tmon-bcm2838"; -+ reg = <0x7d5d2200 0x2c>; -+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-names = "tmon"; -+ clocks = <&clocks BCM2835_CLOCK_TSENS>; -+ #thermal-sensor-cells = <0>; -+ status = "okay"; -+ }; -+ -+ pm: watchdog@7e100000 { -+ reg = <0x7e100000 0x114>, -+ <0x7e00a000 0x24>, -+ <0x7ec11000 0x20>; -+ }; -+ -+ rng@7e104000 { -+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; -+ }; -+ -+ uart2: serial@7e201400 { -+ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; -+ reg = <0x7e201400 0x200>; -+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2835_CLOCK_UART>, -+ <&clocks BCM2835_CLOCK_VPU>; -+ clock-names = "uartclk", "apb_pclk"; -+ arm,primecell-periphid = <0x00241011>; -+ status = "disabled"; -+ }; -+ -+ uart3: serial@7e201600 { -+ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; -+ reg = <0x7e201600 0x200>; -+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2835_CLOCK_UART>, -+ <&clocks BCM2835_CLOCK_VPU>; -+ clock-names = "uartclk", "apb_pclk"; -+ arm,primecell-periphid = <0x00241011>; -+ status = "disabled"; -+ }; -+ -+ uart4: serial@7e201800 { -+ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; -+ reg = <0x7e201800 0x200>; -+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2835_CLOCK_UART>, -+ <&clocks BCM2835_CLOCK_VPU>; -+ clock-names = "uartclk", "apb_pclk"; -+ arm,primecell-periphid = <0x00241011>; -+ status = "disabled"; -+ }; -+ -+ uart5: serial@7e201a00 { -+ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; -+ reg = <0x7e201a00 0x200>; -+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2835_CLOCK_UART>, -+ <&clocks BCM2835_CLOCK_VPU>; -+ clock-names = "uartclk", "apb_pclk"; -+ arm,primecell-periphid = <0x00241011>; -+ status = "disabled"; -+ }; -+ -+ spi@7e204000 { -+ reg = <0x7e204000 0x0200>; -+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; -+ }; -+ -+ spi3: spi@7e204600 { -+ compatible = "brcm,bcm2835-spi"; -+ reg = <0x7e204600 0x0200>; -+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ spi4: spi@7e204800 { -+ compatible = "brcm,bcm2835-spi"; -+ reg = <0x7e204800 0x0200>; -+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ spi5: spi@7e204a00 { -+ compatible = "brcm,bcm2835-spi"; -+ reg = <0x7e204a00 0x0200>; -+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ spi6: spi@7e204c00 { -+ compatible = "brcm,bcm2835-spi"; -+ reg = <0x7e204c00 0x0200>; -+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ i2c3: i2c@7e205600 { -+ compatible = "brcm,bcm2835-i2c"; -+ reg = <0x7e205600 0x200>; -+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ i2c4: i2c@7e205800 { -+ compatible = "brcm,bcm2835-i2c"; -+ reg = <0x7e205800 0x200>; -+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ i2c5: i2c@7e205a00 { -+ compatible = "brcm,bcm2835-i2c"; -+ reg = <0x7e205a00 0x200>; -+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ i2c6: i2c@7e205c00 { -+ compatible = "brcm,bcm2835-i2c"; -+ reg = <0x7e205c00 0x200>; -+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ pixelvalve@7e206000 { -+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; -+ }; -+ -+ pixelvalve@7e207000 { -+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; -+ }; -+ -+ pwm1: pwm@7e20c800 { -+ compatible = "brcm,bcm2835-pwm"; -+ reg = <0x7e20c800 0x28>; -+ clocks = <&clocks BCM2835_CLOCK_PWM>; -+ assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; -+ assigned-clock-rates = <10000000>; -+ #pwm-cells = <2>; -+ status = "disabled"; -+ }; -+ -+ emmc2: emmc2@7e340000 { -+ compatible = "brcm,bcm2711-emmc2"; -+ status = "okay"; -+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clocks BCM2711_CLOCK_EMMC2>; -+ reg = <0x7e340000 0x100>; -+ }; -+ -+ hvs@7e400000 { -+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; -+ }; -+ -+ pixelvalve@7e807000 { -+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; -+ }; -+ }; -+ -+ arm-pmu { -+ compatible = "arm,cortex-a72-pmu"; -+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; -+ }; -+ -+ timer { -+ compatible = "arm,armv7-timer"; -+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | -+ IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | -+ IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | -+ IRQ_TYPE_LEVEL_LOW)>, -+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | -+ IRQ_TYPE_LEVEL_LOW)>; -+ arm,cpu-registers-not-fw-configured; -+ always-on; -+ }; -+ -+ cpus: cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit -+ -+ cpu0: cpu@0 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a72"; -+ reg = <0>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000d8>; -+ }; -+ -+ cpu1: cpu@1 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a72"; -+ reg = <1>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000e0>; -+ }; -+ -+ cpu2: cpu@2 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a72"; -+ reg = <2>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000e8>; -+ }; -+ -+ cpu3: cpu@3 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a72"; -+ reg = <3>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000f0>; -+ }; -+ }; -+ -+ v3dbus { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <2>; -+ ranges = <0x7c500000 0x0 0xfc500000 0x0 0x03300000>, -+ <0x40000000 0x0 0xff800000 0x0 0x00800000>; -+ dma-ranges = <0x00000000 0x0 0x00000000 0x4 0x00000000>; -+ -+ v3d: v3d@7ec04000 { -+ compatible = "brcm,2711-v3d"; -+ reg = -+ <0x7ec00000 0x0 0x4000>, -+ <0x7ec04000 0x0 0x4000>; -+ reg-names = "hub", "core0"; -+ -+ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; -+ resets = <&pm BCM2835_RESET_V3D>; -+ clocks = <&clocks BCM2835_CLOCK_V3D>; -+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; -+ status = "okay"; -+ }; -+ }; -+ -+ scb: scb { -+ compatible = "simple-bus"; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ -+ ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>, -+ <0x0 0x40000000 0x0 0xff800000 0x00800000>, -+ <0x6 0x00000000 0x6 0x00000000 0x40000000>, -+ <0x0 0x00000000 0x0 0x00000000 0xfc000000>; -+ dma-ranges = <0x0 0x00000000 0x0 0x00000000 0xfc000000>; -+ -+ pcie_0: pcie@7d500000 { -+ reg = <0x0 0x7d500000 0x9310>, -+ <0x0 0x7e00f300 0x20>; -+ msi-controller; -+ msi-parent = <&pcie_0>; -+ #address-cells = <3>; -+ #interrupt-cells = <1>; -+ #size-cells = <2>; -+ bus-range = <0x0 0x01>; -+ compatible = "brcm,bcm7211-pcie", "brcm,bcm7445-pcie", -+ "brcm,pci-plat-dev"; -+ max-link-speed = <2>; -+ tot-num-pcie = <1>; -+ linux,pci-domain = <0>; -+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-names = "pcie", "msi"; -+ interrupt-map-mask = <0x0 0x0 0x0 0x7>; -+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 -+ IRQ_TYPE_LEVEL_HIGH -+ 0 0 0 2 &gicv2 GIC_SPI 144 -+ IRQ_TYPE_LEVEL_HIGH -+ 0 0 0 3 &gicv2 GIC_SPI 145 -+ IRQ_TYPE_LEVEL_HIGH -+ 0 0 0 4 &gicv2 GIC_SPI 146 -+ IRQ_TYPE_LEVEL_HIGH>; -+ -+ /* Map outbound accesses from scb:0x6_00000000-03ffffff -+ * to pci:0x0_f8000000-fbffffff -+ */ -+ ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 -+ 0x0 0x04000000>; -+ /* Map inbound accesses from pci:0x0_00000000..ffffffff -+ * to scb:0x0_00000000-ffffffff -+ */ -+ dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 -+ 0x1 0x00000000>; -+ status = "okay"; -+ }; -+ -+ genet: genet@7d580000 { -+ compatible = "brcm,genet-v5"; -+ reg = <0x0 0x7d580000 0x10000>; -+ status = "okay"; -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; -+ phy-handle = <&phy1>; -+ phy-mode = "rgmii"; -+ mdio@e14 { -+ #address-cells = <0x0>; -+ #size-cells = <0x1>; -+ compatible = "brcm,genet-mdio-v5"; -+ reg = <0xe14 0x8>; -+ reg-names = "mdio"; -+ phy1: genet-phy@0 { -+ compatible = -+ "ethernet-phy-ieee802.3-c22"; -+ /* No interrupts - use PHY_POLL */ -+ max-speed = <1000>; -+ reg = <0x1>; -+ }; -+ }; -+ }; -+ -+ dma40: dma@7e007b00 { -+ compatible = "brcm,bcm2838-dma"; -+ reg = <0x0 0x7e007b00 0x400>; -+ interrupts = -+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, /* dma4 11 */ -+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, /* dma4 12 */ -+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, /* dma4 13 */ -+ <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; /* dma4 14 */ -+ interrupt-names = "dma11", -+ "dma12", -+ "dma13", -+ "dma14"; -+ #dma-cells = <1>; -+ brcm,dma-channel-mask = <0x7800>; -+ }; -+ /* DMA4 - 40 bit DMA engines */ -+ -+ xhci: xhci@7e9c0000 { -+ compatible = "generic-xhci"; -+ status = "disabled"; -+ reg = <0x0 0x7e9c0000 0x100000>; -+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; -+ }; -+ -+ hevc-decoder@7eb00000 { -+ compatible = "raspberrypi,rpivid-hevc-decoder"; -+ reg = <0x0 0x7eb00000 0x10000>; -+ status = "okay"; -+ }; -+ -+ rpivid-local-intc@7eb10000 { -+ compatible = "raspberrypi,rpivid-local-intc"; -+ reg = <0x0 0x7eb10000 0x1000>; -+ status = "okay"; -+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; -+ }; -+ -+ h264-decoder@7eb20000 { -+ compatible = "raspberrypi,rpivid-h264-decoder"; -+ reg = <0x0 0x7eb20000 0x10000>; -+ status = "okay"; -+ }; -+ -+ vp9-decoder@7eb30000 { -+ compatible = "raspberrypi,rpivid-vp9-decoder"; -+ reg = <0x0 0x7eb30000 0x10000>; -+ status = "okay"; -+ }; -+ }; -+}; -+ -+&clk_osc { -+ clock-frequency = <54000000>; -+}; -+ -+&clocks { -+ compatible = "brcm,bcm2711-cprman"; -+}; -+ -+&cpu_thermal { -+ coefficients = <(-487) 410040>; -+}; -+ -+&dsi0 { -+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&dsi1 { -+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&gpio { -+ compatible = "brcm,bcm2711-gpio", "brcm,bcm2835-gpio"; -+ -+ gpclk0_gpio49: gpclk0_gpio49 { -+ brcm,pins = <49>; -+ brcm,function = <BCM2835_FSEL_ALT1>; -+ brcm,pull = <BCM2835_PUD_OFF>; -+ }; -+ gpclk1_gpio50: gpclk1_gpio50 { -+ brcm,pins = <50>; -+ brcm,function = <BCM2835_FSEL_ALT1>; -+ brcm,pull = <BCM2835_PUD_OFF>; -+ }; -+ gpclk2_gpio51: gpclk2_gpio51 { -+ brcm,pins = <51>; -+ brcm,function = <BCM2835_FSEL_ALT1>; -+ brcm,pull = <BCM2835_PUD_OFF>; -+ }; -+ -+ i2c0_gpio46: i2c0_gpio46 { -+ brcm,pins = <46 47>; -+ brcm,function = <BCM2835_FSEL_ALT0>; -+ }; -+ i2c1_gpio46: i2c1_gpio46 { -+ brcm,pins = <46 47>; -+ brcm,function = <BCM2835_FSEL_ALT1>; -+ }; -+ i2c3_gpio2: i2c3_gpio2 { -+ brcm,pins = <2 3>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+ i2c3_gpio4: i2c3_gpio4 { -+ brcm,pins = <4 5>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+ i2c4_gpio6: i2c4_gpio6 { -+ brcm,pins = <6 7>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+ i2c4_gpio8: i2c4_gpio8 { -+ brcm,pins = <8 9>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+ i2c5_gpio10: i2c5_gpio10 { -+ brcm,pins = <10 11>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+ i2c5_gpio12: i2c5_gpio12 { -+ brcm,pins = <12 13>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+ i2c6_gpio0: i2c6_gpio0 { -+ brcm,pins = <0 1>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+ i2c6_gpio22: i2c6_gpio22 { -+ brcm,pins = <22 23>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+ i2c_slave_gpio8: i2c_slave_gpio8 { -+ brcm,pins = <8 9 10 11>; -+ brcm,function = <BCM2835_FSEL_ALT3>; -+ }; -+ -+ jtag_gpio48: jtag_gpio48 { -+ brcm,pins = <48 49 50 51 52 53>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ }; -+ -+ mii_gpio28: mii_gpio28 { -+ brcm,pins = <28 29 30 31>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ }; -+ mii_gpio36: mii_gpio36 { -+ brcm,pins = <36 37 38 39>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+ -+ pcm_gpio50: pcm_gpio50 { -+ brcm,pins = <50 51 52 53>; -+ brcm,function = <BCM2835_FSEL_ALT2>; -+ }; -+ -+ pwm0_gpio52: pwm0_gpio52 { -+ brcm,pins = <52>; -+ brcm,function = <BCM2835_FSEL_ALT1>; -+ brcm,pull = <BCM2835_PUD_OFF>; -+ }; -+ pwm1_gpio53: pwm1_gpio53 { -+ brcm,pins = <53>; -+ brcm,function = <BCM2835_FSEL_ALT1>; -+ brcm,pull = <BCM2835_PUD_OFF>; -+ }; -+ -+ /* The following group consists of: -+ * RGMII_START_STOP -+ * RGMII_RX_OK -+ */ -+ rgmii_gpio35: rgmii_gpio35 { -+ brcm,pins = <35 36>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ }; -+ rgmii_irq_gpio34: rgmii_irq_gpio34 { -+ brcm,pins = <34>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+ rgmii_irq_gpio39: rgmii_irq_gpio39 { -+ brcm,pins = <39>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ }; -+ rgmii_mdio_gpio28: rgmii_mdio_gpio28 { -+ brcm,pins = <28 29>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+ rgmii_mdio_gpio37: rgmii_mdio_gpio37 { -+ brcm,pins = <37 38>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ }; -+ -+ spi0_gpio46: spi0_gpio46 { -+ brcm,pins = <46 47 48 49>; -+ brcm,function = <BCM2835_FSEL_ALT2>; -+ }; -+ spi2_gpio46: spi2_gpio46 { -+ brcm,pins = <46 47 48 49 50>; -+ brcm,function = <BCM2835_FSEL_ALT5>; -+ }; -+ spi3_gpio0: spi3_gpio0 { -+ brcm,pins = <0 1 2 3>; -+ brcm,function = <BCM2835_FSEL_ALT3>; -+ }; -+ spi4_gpio4: spi4_gpio4 { -+ brcm,pins = <4 5 6 7>; -+ brcm,function = <BCM2835_FSEL_ALT3>; -+ }; -+ spi5_gpio12: spi5_gpio12 { -+ brcm,pins = <12 13 14 15>; -+ brcm,function = <BCM2835_FSEL_ALT3>; -+ }; -+ spi6_gpio18: spi6_gpio18 { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = <BCM2835_FSEL_ALT3>; -+ }; -+ -+ uart2_gpio0: uart2_gpio0 { -+ brcm,pins = <0 1>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; -+ }; -+ uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 { -+ brcm,pins = <2 3>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; -+ }; -+ uart3_gpio4: uart3_gpio4 { -+ brcm,pins = <4 5>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; -+ }; -+ uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 { -+ brcm,pins = <6 7>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; -+ }; -+ uart4_gpio8: uart4_gpio8 { -+ brcm,pins = <8 9>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; -+ }; -+ uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 { -+ brcm,pins = <10 11>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; -+ }; -+ uart5_gpio12: uart5_gpio12 { -+ brcm,pins = <12 13>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; -+ }; -+ uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 { -+ brcm,pins = <14 15>; -+ brcm,function = <BCM2835_FSEL_ALT4>; -+ brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; -+ }; -+}; -+ -+&vec { -+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&usb { -+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; -+ status = "disabled"; -+}; -+ -+&hdmi { -+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&uart1 { -+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&spi1 { -+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&spi2 { -+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&csi0 { -+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&csi1 { -+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&sdhci { -+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&i2c0 { -+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&i2c1 { -+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&i2c2 { -+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&gpio { -+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&mailbox { -+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&rng { -+ compatible = "brcm,bcm2838-rng200"; -+}; -+ -+&sdhost { -+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&uart0 { -+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; -+}; -+ -+&dma { -+ reg = <0x7e007000 0xb00>; -+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 7 */ -+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 8 */ -+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 9 */ -+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; /* dmalite 10 */ -+ interrupt-names = "dma0", -+ "dma1", -+ "dma2", -+ "dma3", -+ "dma4", -+ "dma5", -+ "dma6", -+ "dma7", -+ "dma8", -+ "dma9", -+ "dma10"; -+ brcm,dma-channel-mask = <0x07f5>; -+}; -+ -+&txp { -+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; -+}; -diff --git a/arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi b/arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi -new file mode 100644 -index 000000000000..952a28eaf616 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi -@@ -0,0 +1,8 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+&csi0 { -+ port { -+ endpoint { -+ data-lanes = <1 2>; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi b/arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi -new file mode 100644 -index 000000000000..451fb4bb4ab8 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi -@@ -0,0 +1,8 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+&csi1 { -+ port { -+ endpoint { -+ data-lanes = <1 2>; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi b/arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi -new file mode 100644 -index 000000000000..9279d4b0bfae ---- /dev/null -+++ b/arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi -@@ -0,0 +1,8 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+&csi1 { -+ port { -+ endpoint { -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi -index 70bece63f9a7..7c6c054459b7 100644 ---- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi -+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi -@@ -29,6 +29,9 @@ - #size-cells = <0x0>; - eth_phy: ethernet-phy@1 { - reg = <1>; -+ microchip,eee-enabled; -+ microchip,tx-lpi-timer = <600>; /* non-aggressive*/ -+ microchip,downshift-after = <2>; - microchip,led-modes = < - LAN78XX_LINK_1000_ACTIVITY - LAN78XX_LINK_10_100_ACTIVITY -@@ -39,3 +42,15 @@ - }; - }; - }; -+ -+ -+/ { -+ __overrides__ { -+ eee = <ð_phy>,"microchip,eee-enabled?"; -+ tx_lpi_timer = <ð_phy>,"microchip,tx-lpi-timer:0"; -+ eth_led0 = <ð_phy>,"microchip,led-modes:0"; -+ eth_led1 = <ð_phy>,"microchip,led-modes:4"; -+ eth_downshift_after = <ð_phy>,"microchip,downshift-after:0"; -+ eth_max_speed = <ð_phy>,"max-speed:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi -index 90125ce19a1b..d7c955443138 100644 ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -56,18 +56,7 @@ - #address-cells = <1>; - #size-cells = <1>; - -- timer@7e003000 { -- compatible = "brcm,bcm2835-system-timer"; -- reg = <0x7e003000 0x1000>; -- interrupts = <1 0>, <1 1>, <1 2>, <1 3>; -- /* This could be a reference to BCM2835_CLOCK_TIMER, -- * but we don't have the driver using the common clock -- * support yet. -- */ -- clock-frequency = <1000000>; -- }; -- -- txp@7e004000 { -+ txp: txp@7e004000 { - compatible = "brcm,bcm2835-txp"; - reg = <0x7e004000 0x20>; - interrupts = <1 11>; -@@ -114,13 +103,6 @@ - brcm,dma-channel-mask = <0x7f35>; - }; - -- intc: interrupt-controller@7e00b200 { -- compatible = "brcm,bcm2835-armctrl-ic"; -- reg = <0x7e00b200 0x200>; -- interrupt-controller; -- #interrupt-cells = <2>; -- }; -- - pm: watchdog@7e100000 { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; - #power-domain-cells = <1>; -@@ -149,7 +131,7 @@ - <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; - }; - -- rng@7e104000 { -+ rng: rng@7e104000 { - compatible = "brcm,bcm2835-rng"; - reg = <0x7e104000 0x10>; - interrupts = <2 29>; -@@ -184,8 +166,7 @@ - interrupt-controller; - #interrupt-cells = <2>; - -- /* Defines pin muxing groups according to -- * BCM2835-ARM-Peripherals.pdf page 102. -+ /* Defines common pin muxing groups - * - * While each pin can have its mux selected - * for various functions individually, some -@@ -263,15 +244,7 @@ - brcm,pins = <44 45>; - brcm,function = <BCM2835_FSEL_ALT2>; - }; -- i2c_slave_gpio18: i2c_slave_gpio18 { -- brcm,pins = <18 19 20 21>; -- brcm,function = <BCM2835_FSEL_ALT3>; -- }; - -- jtag_gpio4: jtag_gpio4 { -- brcm,pins = <4 5 6 12 13>; -- brcm,function = <BCM2835_FSEL_ALT5>; -- }; - jtag_gpio22: jtag_gpio22 { - brcm,pins = <22 23 24 25 26 27>; - brcm,function = <BCM2835_FSEL_ALT4>; -@@ -410,7 +383,7 @@ - reg = <0x7e202000 0x100>; - interrupts = <2 24>; - clocks = <&clocks BCM2835_CLOCK_VPU>; -- dmas = <&dma 13>; -+ dmas = <&dma (13|(1<<29))>; - dma-names = "rx-tx"; - status = "disabled"; - }; -@@ -490,14 +463,6 @@ - - }; - -- thermal: thermal@7e212000 { -- compatible = "brcm,bcm2835-thermal"; -- reg = <0x7e212000 0x8>; -- clocks = <&clocks BCM2835_CLOCK_TSENS>; -- #thermal-sensor-cells = <0>; -- status = "disabled"; -- }; -- - aux: aux@7e215000 { - compatible = "brcm,bcm2835-aux"; - #clock-cells = <1>; -@@ -577,6 +542,32 @@ - status = "disabled"; - }; - -+ csi0: csi@7e800000 { -+ compatible = "brcm,bcm2835-unicam"; -+ reg = <0x7e800000 0x800>, -+ <0x7e802000 0x4>; -+ interrupts = <2 6>; -+ clocks = <&clocks BCM2835_CLOCK_CAM0>; -+ clock-names = "lp"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #clock-cells = <1>; -+ status = "disabled"; -+ }; -+ -+ csi1: csi@7e801000 { -+ compatible = "brcm,bcm2835-unicam"; -+ reg = <0x7e801000 0x800>, -+ <0x7e802004 0x4>; -+ interrupts = <2 7>; -+ clocks = <&clocks BCM2835_CLOCK_CAM1>; -+ clock-names = "lp"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #clock-cells = <1>; -+ status = "disabled"; -+ }; -+ - i2c1: i2c@7e804000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e804000 0x1000>; -@@ -637,13 +628,6 @@ - phy-names = "usb2-phy"; - }; - -- v3d: v3d@7ec00000 { -- compatible = "brcm,bcm2835-v3d"; -- reg = <0x7ec00000 0x1000>; -- interrupts = <1 10>; -- power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; -- }; -- - vc4: gpu { - compatible = "brcm,bcm2835-vc4"; - }; -diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile -new file mode 100644 -index 000000000000..e9cd9722bb94 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -0,0 +1,194 @@ -+# Overlays for the Raspberry Pi platform -+ -+dtbo-$(CONFIG_ARCH_BCM2835) += \ -+ act-led.dtbo \ -+ adau1977-adc.dtbo \ -+ adau7002-simple.dtbo \ -+ ads1015.dtbo \ -+ ads1115.dtbo \ -+ ads7846.dtbo \ -+ adv7282m.dtbo \ -+ adv728x-m.dtbo \ -+ akkordion-iqdacplus.dtbo \ -+ allo-boss-dac-pcm512x-audio.dtbo \ -+ allo-digione.dtbo \ -+ allo-katana-dac-audio.dtbo \ -+ allo-piano-dac-pcm512x-audio.dtbo \ -+ allo-piano-dac-plus-pcm512x-audio.dtbo \ -+ applepi-dac.dtbo \ -+ at86rf233.dtbo \ -+ audioinjector-addons.dtbo \ -+ audioinjector-ultra.dtbo \ -+ audioinjector-wm8731-audio.dtbo \ -+ audiosense-pi.dtbo \ -+ audremap.dtbo \ -+ balena-fin.dtbo \ -+ bmp085_i2c-sensor.dtbo \ -+ dht11.dtbo \ -+ dionaudio-loco.dtbo \ -+ dionaudio-loco-v2.dtbo \ -+ disable-bt.dtbo \ -+ disable-wifi.dtbo \ -+ dpi18.dtbo \ -+ dpi24.dtbo \ -+ draws.dtbo \ -+ dwc-otg.dtbo \ -+ dwc2.dtbo \ -+ enc28j60.dtbo \ -+ enc28j60-spi2.dtbo \ -+ exc3000.dtbo \ -+ fe-pi-audio.dtbo \ -+ goodix.dtbo \ -+ googlevoicehat-soundcard.dtbo \ -+ gpio-fan.dtbo \ -+ gpio-ir.dtbo \ -+ gpio-ir-tx.dtbo \ -+ gpio-key.dtbo \ -+ gpio-no-bank0-irq.dtbo \ -+ gpio-no-irq.dtbo \ -+ gpio-poweroff.dtbo \ -+ gpio-shutdown.dtbo \ -+ hd44780-lcd.dtbo \ -+ hifiberry-amp.dtbo \ -+ hifiberry-dac.dtbo \ -+ hifiberry-dacplus.dtbo \ -+ hifiberry-dacplusadc.dtbo \ -+ hifiberry-dacplusadcpro.dtbo \ -+ hifiberry-dacplusdsp.dtbo \ -+ hifiberry-digi.dtbo \ -+ hifiberry-digi-pro.dtbo \ -+ hy28a.dtbo \ -+ hy28b.dtbo \ -+ hy28b-2017.dtbo \ -+ i-sabre-q2m.dtbo \ -+ i2c-bcm2708.dtbo \ -+ i2c-gpio.dtbo \ -+ i2c-mux.dtbo \ -+ i2c-pwm-pca9685a.dtbo \ -+ i2c-rtc.dtbo \ -+ i2c-rtc-gpio.dtbo \ -+ i2c-sensor.dtbo \ -+ i2c0.dtbo \ -+ i2c0-bcm2708.dtbo \ -+ i2c1.dtbo \ -+ i2c1-bcm2708.dtbo \ -+ i2c3.dtbo \ -+ i2c4.dtbo \ -+ i2c5.dtbo \ -+ i2c6.dtbo \ -+ i2s-gpio28-31.dtbo \ -+ ilitek251x.dtbo \ -+ imx219.dtbo \ -+ iqaudio-codec.dtbo \ -+ iqaudio-dac.dtbo \ -+ iqaudio-dacplus.dtbo \ -+ iqaudio-digi-wm8804-audio.dtbo \ -+ irs1125.dtbo \ -+ jedec-spi-nor.dtbo \ -+ justboom-dac.dtbo \ -+ justboom-digi.dtbo \ -+ ltc294x.dtbo \ -+ max98357a.dtbo \ -+ mbed-dac.dtbo \ -+ mcp23017.dtbo \ -+ mcp23s17.dtbo \ -+ mcp2515-can0.dtbo \ -+ mcp2515-can1.dtbo \ -+ mcp3008.dtbo \ -+ mcp3202.dtbo \ -+ mcp342x.dtbo \ -+ media-center.dtbo \ -+ midi-uart0.dtbo \ -+ midi-uart1.dtbo \ -+ miniuart-bt.dtbo \ -+ mmc.dtbo \ -+ mpu6050.dtbo \ -+ mz61581.dtbo \ -+ ov5647.dtbo \ -+ papirus.dtbo \ -+ pi3-act-led.dtbo \ -+ pi3-disable-bt.dtbo \ -+ pi3-disable-wifi.dtbo \ -+ pi3-miniuart-bt.dtbo \ -+ pibell.dtbo \ -+ piglow.dtbo \ -+ piscreen.dtbo \ -+ piscreen2r.dtbo \ -+ pisound.dtbo \ -+ pitft22.dtbo \ -+ pitft28-capacitive.dtbo \ -+ pitft28-resistive.dtbo \ -+ pitft35-resistive.dtbo \ -+ pps-gpio.dtbo \ -+ pwm.dtbo \ -+ pwm-2chan.dtbo \ -+ pwm-ir-tx.dtbo \ -+ qca7000.dtbo \ -+ rotary-encoder.dtbo \ -+ rpi-backlight.dtbo \ -+ rpi-cirrus-wm5102.dtbo \ -+ rpi-dac.dtbo \ -+ rpi-display.dtbo \ -+ rpi-ft5406.dtbo \ -+ rpi-poe.dtbo \ -+ rpi-proto.dtbo \ -+ rpi-sense.dtbo \ -+ rpi-tv.dtbo \ -+ rra-digidac1-wm8741-audio.dtbo \ -+ sc16is750-i2c.dtbo \ -+ sc16is752-i2c.dtbo \ -+ sc16is752-spi1.dtbo \ -+ sdhost.dtbo \ -+ sdio.dtbo \ -+ sdtweak.dtbo \ -+ smi.dtbo \ -+ smi-dev.dtbo \ -+ smi-nand.dtbo \ -+ spi-gpio35-39.dtbo \ -+ spi-gpio40-45.dtbo \ -+ spi-rtc.dtbo \ -+ spi0-cs.dtbo \ -+ spi0-hw-cs.dtbo \ -+ spi1-1cs.dtbo \ -+ spi1-2cs.dtbo \ -+ spi1-3cs.dtbo \ -+ spi2-1cs.dtbo \ -+ spi2-2cs.dtbo \ -+ spi2-3cs.dtbo \ -+ spi3-1cs.dtbo \ -+ spi3-2cs.dtbo \ -+ spi4-1cs.dtbo \ -+ spi4-2cs.dtbo \ -+ spi5-1cs.dtbo \ -+ spi5-2cs.dtbo \ -+ spi6-1cs.dtbo \ -+ spi6-2cs.dtbo \ -+ ssd1306.dtbo \ -+ superaudioboard.dtbo \ -+ sx150x.dtbo \ -+ tc358743.dtbo \ -+ tc358743-audio.dtbo \ -+ tinylcd35.dtbo \ -+ tpm-slb9670.dtbo \ -+ uart0.dtbo \ -+ uart1.dtbo \ -+ uart2.dtbo \ -+ uart3.dtbo \ -+ uart4.dtbo \ -+ uart5.dtbo \ -+ udrc.dtbo \ -+ upstream.dtbo \ -+ vc4-fkms-v3d.dtbo \ -+ vc4-kms-kippah-7inch.dtbo \ -+ vc4-kms-v3d.dtbo \ -+ vga666.dtbo \ -+ w1-gpio.dtbo \ -+ w1-gpio-pullup.dtbo \ -+ w5500.dtbo \ -+ wittypi.dtbo -+ -+targets += dtbs dtbs_install -+targets += $(dtbo-y) -+ -+always := $(dtbo-y) -+clean-files := *.dtbo -diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README -new file mode 100644 -index 000000000000..8ce8cf05a2c8 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/README -@@ -0,0 +1,2591 @@ -+Introduction -+============ -+ -+This directory contains Device Tree overlays. Device Tree makes it possible -+to support many hardware configurations with a single kernel and without the -+need to explicitly load or blacklist kernel modules. Note that this isn't a -+"pure" Device Tree configuration (c.f. MACH_BCM2835) - some on-board devices -+are still configured by the board support code, but the intention is to -+eventually reach that goal. -+ -+On Raspberry Pi, Device Tree usage is controlled from /boot/config.txt. By -+default, the Raspberry Pi kernel boots with device tree enabled. You can -+completely disable DT usage (for now) by adding: -+ -+ device_tree= -+ -+to your config.txt, which should cause your Pi to revert to the old way of -+doing things after a reboot. -+ -+In /boot you will find a .dtb for each base platform. This describes the -+hardware that is part of the Raspberry Pi board. The loader (start.elf and its -+siblings) selects the .dtb file appropriate for the platform by name, and reads -+it into memory. At this point, all of the optional interfaces (i2c, i2s, spi) -+are disabled, but they can be enabled using Device Tree parameters: -+ -+ dtparam=i2c=on,i2s=on,spi=on -+ -+However, this shouldn't be necessary in many use cases because loading an -+overlay that requires one of those interfaces will cause it to be enabled -+automatically, and it is advisable to only enable interfaces if they are -+needed. -+ -+Configuring additional, optional hardware is done using Device Tree overlays -+(see below). -+ -+GPIO numbering uses the hardware pin numbering scheme (aka BCM scheme) and -+not the physical pin numbers. -+ -+raspi-config -+============ -+ -+The Advanced Options section of the raspi-config utility can enable and disable -+Device Tree use, as well as toggling the I2C and SPI interfaces. Note that it -+is possible to both enable an interface and blacklist the driver, if for some -+reason you should want to defer the loading. -+ -+Modules -+======= -+ -+As well as describing the hardware, Device Tree also gives enough information -+to allow suitable driver modules to be located and loaded, with the corollary -+that unneeded modules are not loaded. As a result it should be possible to -+remove lines from /etc/modules, and /etc/modprobe.d/raspi-blacklist.conf can -+have its contents deleted (or commented out). -+ -+Using Overlays -+============== -+ -+Overlays are loaded using the "dtoverlay" config.txt setting. As an example, -+consider I2C Real Time Clock drivers. In the pre-DT world these would be loaded -+by writing a magic string comprising a device identifier and an I2C address to -+a special file in /sys/class/i2c-adapter, having first loaded the driver for -+the I2C interface and the RTC device - something like this: -+ -+ modprobe i2c-bcm2835 -+ modprobe rtc-ds1307 -+ echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device -+ -+With DT enabled, this becomes a line in config.txt: -+ -+ dtoverlay=i2c-rtc,ds1307 -+ -+This causes the file /boot/overlays/i2c-rtc.dtbo to be loaded and a "node" -+describing the DS1307 I2C device to be added to the Device Tree for the Pi. By -+default it usees address 0x68, but this can be modified with an additional DT -+parameter: -+ -+ dtoverlay=i2c-rtc,ds1307,addr=0x68 -+ -+Parameters usually have default values, although certain parameters are -+mandatory. See the list of overlays below for a description of the parameters -+and their defaults. -+ -+The Overlay and Parameter Reference -+=================================== -+ -+N.B. When editing this file, please preserve the indentation levels to make it -+simple to parse programmatically. NO HARD TABS. -+ -+ -+Name: <The base DTB> -+Info: Configures the base Raspberry Pi hardware -+Load: <loaded automatically> -+Params: -+ audio Set to "on" to enable the onboard ALSA audio -+ interface (default "off") -+ -+ axiperf Set to "on" to enable the AXI bus performance -+ monitors. -+ See /sys/kernel/debug/raspberrypi_axi_monitor -+ for the results. -+ -+ eee Enable Energy Efficient Ethernet support for -+ compatible devices (default "on"). See also -+ "tx_lpi_timer". -+ -+ eth_downshift_after Set the number of auto-negotiation failures -+ after which the 1000Mbps modes are disabled. -+ Legal values are 2, 3, 4, 5 and 0, where -+ 0 means never downshift (default 2). -+ -+ eth_led0 Set mode of LED0 (usually orange) (default -+ "1"). The legal values are: -+ 0=link/activity 1=link1000/activity -+ 2=link100/activity 3=link10/activity -+ 4=link100/1000/activity 5=link10/1000/activity -+ 6=link10/100/activity 14=off 15=on -+ -+ eth_led1 Set mode of LED1 (usually green) (default -+ "6"). See eth_led0 for legal values. -+ -+ eth_max_speed Set the maximum speed a link is allowed -+ to negotiate. Legal values are 10, 100 and -+ 1000 (default 1000). -+ -+ i2c_arm Set to "on" to enable the ARM's i2c interface -+ (default "off") -+ -+ i2c_vc Set to "on" to enable the i2c interface -+ usually reserved for the VideoCore processor -+ (default "off") -+ -+ i2c An alias for i2c_arm -+ -+ i2c_arm_baudrate Set the baudrate of the ARM's i2c interface -+ (default "100000") -+ -+ i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface -+ (default "100000") -+ -+ i2c_baudrate An alias for i2c_arm_baudrate -+ -+ i2s Set to "on" to enable the i2s interface -+ (default "off") -+ -+ spi Set to "on" to enable the spi interfaces -+ (default "off") -+ -+ random Set to "on" to enable the hardware random -+ number generator (default "on") -+ -+ sd_overclock Clock (in MHz) to use when the MMC framework -+ requests 50MHz -+ -+ sd_force_pio Disable DMA support for SD driver (default off) -+ -+ sd_pio_limit Number of blocks above which to use DMA for -+ SD card (default 1) -+ -+ sd_debug Enable debug output from SD driver (default off) -+ -+ sdio_overclock Clock (in MHz) to use when the MMC framework -+ requests 50MHz for the SDIO/WiFi interface. -+ -+ tx_lpi_timer Set the delay in microseconds between going idle -+ and entering the low power state (default 600). -+ Requires EEE to be enabled - see "eee". -+ -+ uart0 Set to "off" to disable uart0 (default "on") -+ -+ uart1 Set to "on" or "off" to enable or disable uart1 -+ (default varies) -+ -+ watchdog Set to "on" to enable the hardware watchdog -+ (default "off") -+ -+ act_led_trigger Choose which activity the LED tracks. -+ Use "heartbeat" for a nice load indicator. -+ (default "mmc") -+ -+ act_led_activelow Set to "on" to invert the sense of the LED -+ (default "off") -+ N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led -+ overlay. -+ -+ act_led_gpio Set which GPIO to use for the activity LED -+ (in case you want to connect it to an external -+ device) -+ (default "16" on a non-Plus board, "47" on a -+ Plus or Pi 2) -+ N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led -+ overlay. -+ -+ pwr_led_trigger -+ pwr_led_activelow -+ pwr_led_gpio -+ As for act_led_*, but using the PWR LED. -+ Not available on Model A/B boards. -+ -+ N.B. It is recommended to only enable those interfaces that are needed. -+ Leaving all interfaces enabled can lead to unwanted behaviour (i2c_vc -+ interfering with Pi Camera, I2S and SPI hogging GPIO pins, etc.) -+ Note also that i2c, i2c_arm and i2c_vc are aliases for the physical -+ interfaces i2c0 and i2c1. Use of the numeric variants is still possible -+ but deprecated because the ARM/VC assignments differ between board -+ revisions. The same board-specific mapping applies to i2c_baudrate, -+ and the other i2c baudrate parameters. -+ -+ -+Name: act-led -+Info: Pi 3B, 3B+, 3A+ and 4B use a GPIO expander to drive the LEDs which can -+ only be accessed from the VPU. There is a special driver for this with a -+ separate DT node, which has the unfortunate consequence of breaking the -+ act_led_gpio and act_led_activelow dtparams. -+ This overlay changes the GPIO controller back to the standard one and -+ restores the dtparams. -+Load: dtoverlay=act-led,<param>=<val> -+Params: activelow Set to "on" to invert the sense of the LED -+ (default "off") -+ -+ gpio Set which GPIO to use for the activity LED -+ (in case you want to connect it to an external -+ device) -+ REQUIRED -+ -+ -+Name: adau1977-adc -+Info: Overlay for activation of ADAU1977 ADC codec over I2C for control -+ and I2S for data. -+Load: dtoverlay=adau1977-adc -+Params: <None> -+ -+ -+Name: adau7002-simple -+Info: Overlay for the activation of ADAU7002 stereo PDM to I2S converter. -+Load: dtoverlay=adau7002-simple,<param>=<val> -+Params: card-name Override the default, "adau7002", card name. -+ -+ -+Name: ads1015 -+Info: Overlay for activation of Texas Instruments ADS1015 ADC over I2C -+Load: dtoverlay=ads1015,<param>=<val> -+Params: addr I2C bus address of device. Set based on how the -+ addr pin is wired. (default=0x48 assumes addr -+ is pulled to GND) -+ cha_enable Enable virtual channel a. (default=true) -+ cha_cfg Set the configuration for virtual channel a. -+ (default=4 configures this channel for the -+ voltage at A0 with respect to GND) -+ cha_datarate Set the datarate (samples/sec) for this channel. -+ (default=4 sets 1600 sps) -+ cha_gain Set the gain of the Programmable Gain -+ Amplifier for this channel. (default=2 sets the -+ full scale of the channel to 2.048 Volts) -+ -+ Channel (ch) parameters can be set for each enabled channel. -+ A maximum of 4 channels can be enabled (letters a thru d). -+ For more information refer to the device datasheet at: -+ http://www.ti.com/lit/ds/symlink/ads1015.pdf -+ -+ -+Name: ads1115 -+Info: Texas Instruments ADS1115 ADC -+Load: dtoverlay=ads1115,<param>[=<val>] -+Params: addr I2C bus address of device. Set based on how the -+ addr pin is wired. (default=0x48 assumes addr -+ is pulled to GND) -+ cha_enable Enable virtual channel a. -+ cha_cfg Set the configuration for virtual channel a. -+ (default=4 configures this channel for the -+ voltage at A0 with respect to GND) -+ cha_datarate Set the datarate (samples/sec) for this channel. -+ (default=7 sets 860 sps) -+ cha_gain Set the gain of the Programmable Gain -+ Amplifier for this channel. (Default 1 sets the -+ full scale of the channel to 4.096 Volts) -+ -+ Channel parameters can be set for each enabled channel. -+ A maximum of 4 channels can be enabled (letters a thru d). -+ For more information refer to the device datasheet at: -+ http://www.ti.com/lit/ds/symlink/ads1115.pdf -+ -+ -+Name: ads7846 -+Info: ADS7846 Touch controller -+Load: dtoverlay=ads7846,<param>=<val> -+Params: cs SPI bus Chip Select (default 1) -+ speed SPI bus speed (default 2MHz, max 3.25MHz) -+ penirq GPIO used for PENIRQ. REQUIRED -+ penirq_pull Set GPIO pull (default 0=none, 2=pullup) -+ swapxy Swap x and y axis -+ xmin Minimum value on the X axis (default 0) -+ ymin Minimum value on the Y axis (default 0) -+ xmax Maximum value on the X axis (default 4095) -+ ymax Maximum value on the Y axis (default 4095) -+ pmin Minimum reported pressure value (default 0) -+ pmax Maximum reported pressure value (default 65535) -+ xohms Touchpanel sensitivity (X-plate resistance) -+ (default 400) -+ -+ penirq is required and usually xohms (60-100) has to be set as well. -+ Apart from that, pmax (255) and swapxy are also common. -+ The rest of the calibration can be done with xinput-calibrator. -+ See: github.com/notro/fbtft/wiki/FBTFT-on-Raspian -+ Device Tree binding document: -+ www.kernel.org/doc/Documentation/devicetree/bindings/input/ads7846.txt -+ -+ -+Name: adv7282m -+Info: Analog Devices ADV7282M analogue video to CSI2 bridge. -+ Uses Unicam1, which is the standard camera connector on most Pi -+ variants. -+Load: dtoverlay=adv7282m,<param>=<val> -+Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. -+ Useful on Compute Modules. -+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+ This is required for Pi B+, 2, 0, and 0W. -+ addr Overrides the I2C address (default 0x21) -+ -+ -+Name: adv728x-m -+Info: Analog Devices ADV728[0|1|2]-M analogue video to CSI2 bridges. -+ This is a wrapper for adv7282m, and defaults to ADV7282M. -+Load: dtoverlay=adv728x-m,<param>=<val> -+Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. -+ Useful on Compute Modules. -+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+ This is required for Pi B+, 2, 0, and 0W. -+ addr Overrides the I2C address (default 0x21) -+ adv7280m Select ADV7280-M. -+ adv7281m Select ADV7281-M. -+ adv7281ma Select ADV7281-MA. -+ -+ -+Name: akkordion-iqdacplus -+Info: Configures the Digital Dreamtime Akkordion Music Player (based on the -+ OEM IQAudIO DAC+ or DAC Zero module). -+Load: dtoverlay=akkordion-iqdacplus,<param>=<val> -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ dtoverlay=akkordion-iqdacplus,24db_digital_gain -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24db_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ -+ -+Name: allo-boss-dac-pcm512x-audio -+Info: Configures the Allo Boss DAC audio cards. -+Load: dtoverlay=allo-boss-dac-pcm512x-audio,<param> -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=allo-boss-dac-pcm512x-audio, -+ 24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24db_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ slave Force Boss DAC into slave mode, using Pi a -+ master for bit clock and frame clock. Enable -+ with "dtoverlay=allo-boss-dac-pcm512x-audio, -+ slave" -+ -+ -+Name: allo-digione -+Info: Configures the Allo Digione audio card -+Load: dtoverlay=allo-digione -+Params: <None> -+ -+ -+Name: allo-katana-dac-audio -+Info: Configures the Allo Katana DAC audio card -+Load: dtoverlay=allo-katana-dac-audio -+Params: <None> -+ -+ -+Name: allo-piano-dac-pcm512x-audio -+Info: Configures the Allo Piano DAC (2.0/2.1) audio cards. -+ (NB. This initial support is for 2.0 channel audio ONLY! ie. stereo. -+ The subwoofer outputs on the Piano 2.1 are not currently supported!) -+Load: dtoverlay=allo-piano-dac-pcm512x-audio,<param> -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24db_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ -+ -+Name: allo-piano-dac-plus-pcm512x-audio -+Info: Configures the Allo Piano DAC (2.1) audio cards. -+Load: dtoverlay=allo-piano-dac-plus-pcm512x-audio,<param> -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24db_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ glb_mclk This option is only with Kali board. If enabled, -+ MCLK for Kali is used and PLL is disabled for -+ better voice quality. (default Off) -+ -+ -+Name: applepi-dac -+Info: Configures the Orchard Audio ApplePi-DAC audio card -+Load: dtoverlay=applepi-dac -+Params: <None> -+ -+ -+Name: at86rf233 -+Info: Configures the Atmel AT86RF233 802.15.4 low-power WPAN transceiver, -+ connected to spi0.0 -+Load: dtoverlay=at86rf233,<param>=<val> -+Params: interrupt GPIO used for INT (default 23) -+ reset GPIO used for Reset (default 24) -+ sleep GPIO used for Sleep (default 25) -+ speed SPI bus speed in Hz (default 3000000) -+ trim Fine tuning of the internal capacitance -+ arrays (0=+0pF, 15=+4.5pF, default 15) -+ -+ -+Name: audioinjector-addons -+Info: Configures the audioinjector.net audio add on soundcards -+Load: dtoverlay=audioinjector-addons,<param>=<val> -+Params: non-stop-clocks Keeps the clocks running even when the stream -+ is paused or stopped (default off) -+ -+ -+Name: audioinjector-ultra -+Info: Configures the audioinjector.net ultra soundcard -+Load: dtoverlay=audioinjector-ultra -+Params: <None> -+ -+ -+Name: audioinjector-wm8731-audio -+Info: Configures the audioinjector.net audio add on soundcard -+Load: dtoverlay=audioinjector-wm8731-audio -+Params: <None> -+ -+ -+Name: audiosense-pi -+Info: Configures the audiosense-pi add on soundcard -+ For more information refer to -+ https://gitlab.com/kakar0t/audiosense-pi -+Load: dtoverlay=audiosense-pi -+Params: <None> -+ -+ -+Name: audremap -+Info: Switches PWM sound output to GPIOs on the 40-pin header -+Load: dtoverlay=audremap,<param>=<val> -+Params: swap_lr Reverse the channel allocation, which will also -+ swap the audio jack outputs (default off) -+ enable_jack Don't switch off the audio jack output -+ (default off) -+ pins_12_13 Select GPIOs 12 & 13 (default) -+ pins_18_19 Select GPIOs 18 & 19 -+ -+ -+Name: balena-fin -+Info: Overlay that enables WiFi, Bluetooth and the GPIO expander on the -+ balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite. -+Load: dtoverlay=balena-fin -+Params: <None> -+ -+ -+Name: bmp085_i2c-sensor -+Info: This overlay is now deprecated - see i2c-sensor -+Load: <Deprecated> -+ -+ -+Name: dht11 -+Info: Overlay for the DHT11/DHT21/DHT22 humidity/temperature sensors -+ Also sometimes found with the part number(s) AM230x. -+Load: dtoverlay=dht11,<param>=<val> -+Params: gpiopin GPIO connected to the sensor's DATA output. -+ (default 4) -+ -+ -+Name: dionaudio-loco -+Info: Configures the Dion Audio LOCO DAC-AMP -+Load: dtoverlay=dionaudio-loco -+Params: <None> -+ -+ -+Name: dionaudio-loco-v2 -+Info: Configures the Dion Audio LOCO-V2 DAC-AMP -+Load: dtoverlay=dionaudio-loco-v2,<param>=<val> -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=hifiberry-dacplus,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24dB_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ -+ -+Name: disable-bt -+Info: Disable onboard Bluetooth on Pi 3B, 3B+, 3A+, 4B and Zero W, restoring -+ UART0/ttyAMA0 over GPIOs 14 & 15. -+ N.B. To disable the systemd service that initialises the modem so it -+ doesn't use the UART, use 'sudo systemctl disable hciuart'. -+Load: dtoverlay=disable-bt -+Params: <None> -+ -+ -+Name: disable-wifi -+Info: Disable onboard WiFi on Pi 3B, 3B+, 3A+, 4B and Zero W. -+Load: dtoverlay=disable-wifi -+Params: <None> -+ -+ -+Name: dpi18 -+Info: Overlay for a generic 18-bit DPI display -+ This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output -+ 2-3 seconds after the kernel has started. -+Load: dtoverlay=dpi18 -+Params: <None> -+ -+ -+Name: dpi24 -+Info: Overlay for a generic 24-bit DPI display -+ This uses GPIOs 0-27 (so no I2C, uart etc.), and activates the output -+ 2-3 seconds after the kernel has started. -+Load: dtoverlay=dpi24 -+Params: <None> -+ -+ -+Name: draws -+Info: Configures the NW Digital Radio DRAWS Hat -+ -+ The board includes an ADC to measure various board values and also -+ provides two analog user inputs on the expansion header. The ADC -+ can be configured for various sample rates and gain values to adjust -+ the input range. Tables describing the two parameters follow. -+ -+ ADC Gain Values: -+ 0 = +/- 6.144V -+ 1 = +/- 4.096V -+ 2 = +/- 2.048V -+ 3 = +/- 1.024V -+ 4 = +/- 0.512V -+ 5 = +/- 0.256V -+ 6 = +/- 0.256V -+ 7 = +/- 0.256V -+ -+ ADC Datarate Values: -+ 0 = 128sps -+ 1 = 250sps -+ 2 = 490sps -+ 3 = 920sps -+ 4 = 1600sps (default) -+ 5 = 2400sps -+ 6 = 3300sps -+ 7 = 3300sps -+Load: dtoverlay=draws,<param>=<val> -+Params: draws_adc_ch4_gain Sets the full scale resolution of the ADCs -+ input voltage sensor (default 1) -+ -+ draws_adc_ch4_datarate Sets the datarate of the ADCs input voltage -+ sensor -+ -+ draws_adc_ch5_gain Sets the full scale resolution of the ADCs -+ 5V rail voltage sensor (default 1) -+ -+ draws_adc_ch5_datarate Sets the datarate of the ADCs 4V rail voltage -+ sensor -+ -+ draws_adc_ch6_gain Sets the full scale resolution of the ADCs -+ AIN2 input (default 2) -+ -+ draws_adc_ch6_datarate Sets the datarate of the ADCs AIN2 input -+ -+ draws_adc_ch7_gain Sets the full scale resolution of the ADCs -+ AIN3 input (default 2) -+ -+ draws_adc_ch7_datarate Sets the datarate of the ADCs AIN3 input -+ -+ alsaname Name of the ALSA audio device (default "draws") -+ -+ -+Name: dwc-otg -+Info: Selects the dwc_otg USB controller driver which has fiq support. This -+ is the default on all except the Pi Zero which defaults to dwc2. -+Load: dtoverlay=dwc-otg -+Params: <None> -+ -+ -+Name: dwc2 -+Info: Selects the dwc2 USB controller driver -+Load: dtoverlay=dwc2,<param>=<val> -+Params: dr_mode Dual role mode: "host", "peripheral" or "otg" -+ -+ g-rx-fifo-size Size of rx fifo size in gadget mode -+ -+ g-np-tx-fifo-size Size of non-periodic tx fifo size in gadget -+ mode -+ -+ -+[ The ds1307-rtc overlay has been deleted. See i2c-rtc. ] -+ -+ -+Name: enc28j60 -+Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI0 -+Load: dtoverlay=enc28j60,<param>=<val> -+Params: int_pin GPIO used for INT (default 25) -+ -+ speed SPI bus speed (default 12000000) -+ -+ -+Name: enc28j60-spi2 -+Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI2 -+Load: dtoverlay=enc28j60-spi2,<param>=<val> -+Params: int_pin GPIO used for INT (default 39) -+ -+ speed SPI bus speed (default 12000000) -+ -+ -+Name: exc3000 -+Info: Enables I2C connected EETI EXC3000 multiple touch controller using -+ GPIO 4 (pin 7 on GPIO header) for interrupt. -+Load: dtoverlay=exc3000,<param>=<val> -+Params: interrupt GPIO used for interrupt (default 4) -+ sizex Touchscreen size x (default 4096) -+ sizey Touchscreen size y (default 4096) -+ invx Touchscreen inverted x axis -+ invy Touchscreen inverted y axis -+ swapxy Touchscreen swapped x y axis -+ -+ -+Name: fe-pi-audio -+Info: Configures the Fe-Pi Audio Sound Card -+Load: dtoverlay=fe-pi-audio -+Params: <None> -+ -+ -+Name: goodix -+Info: Enables I2C connected Goodix gt9271 multiple touch controller using -+ GPIOs 4 and 17 (pins 7 and 11 on GPIO header) for interrupt and reset. -+Load: dtoverlay=goodix,<param>=<val> -+Params: interrupt GPIO used for interrupt (default 4) -+ reset GPIO used for reset (default 17) -+ -+ -+Name: googlevoicehat-soundcard -+Info: Configures the Google voiceHAT soundcard -+Load: dtoverlay=googlevoicehat-soundcard -+Params: <None> -+ -+ -+Name: gpio-fan -+Info: Configure a GPIO pin to control a cooling fan. -+Load: dtoverlay=gpio-fan,<param>=<val> -+Params: gpiopin GPIO used to control the fan (default 12) -+ temp Temperature at which the fan switches on, in -+ millicelcius (default 55000) -+ -+ -+Name: gpio-ir -+Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- -+ based gpio_ir_recv driver maps received keys directly to a -+ /dev/input/event* device, all decoding is done by the kernel - LIRC is -+ not required! The key mapping and other decoding parameters can be -+ configured by "ir-keytable" tool. -+Load: dtoverlay=gpio-ir,<param>=<val> -+Params: gpio_pin Input pin number. Default is 18. -+ -+ gpio_pull Desired pull-up/down state (off, down, up) -+ Default is "up". -+ -+ rc-map-name Default rc keymap (can also be changed by -+ ir-keytable), defaults to "rc-rc6-mce" -+ -+ -+Name: gpio-ir-tx -+Info: Use GPIO pin as bit-banged infrared transmitter output. -+ This is an alternative to "pwm-ir-tx". gpio-ir-tx doesn't require -+ a PWM so it can be used together with onboard analog audio. -+Load: dtoverlay=gpio-ir-tx,<param>=<val> -+Params: gpio_pin Output GPIO (default 18) -+ -+ invert "1" = invert the output (make it active-low). -+ Default is "0" (active-high). -+ -+ -+Name: gpio-key -+Info: This is a generic overlay for activating GPIO keypresses using -+ the gpio-keys library and this dtoverlay. Multiple keys can be -+ set up using multiple calls to the overlay for configuring -+ additional buttons or joysticks. You can see available keycodes -+ at https://github.com/torvalds/linux/blob/v4.12/include/uapi/ -+ linux/input-event-codes.h#L64 -+Load: dtoverlay=gpio-key,<param>=<val> -+Params: gpio GPIO pin to trigger on (default 3) -+ active_low When this is 1 (active low), a falling -+ edge generates a key down event and a -+ rising edge generates a key up event. -+ When this is 0 (active high), this is -+ reversed. The default is 1 (active low) -+ gpio_pull Desired pull-up/down state (off, down, up) -+ Default is "up". Note that the default pin -+ (GPIO3) has an external pullup -+ label Set a label for the key -+ keycode Set the key code for the button -+ -+ -+Name: gpio-no-bank0-irq -+Info: Use this overlay to disable GPIO interrupts for GPIOs in bank 0 (0-27), -+ which can be useful for UIO drivers. -+ N.B. Using this overlay will trigger a kernel WARN during booting, but -+ this can safely be ignored - the system should work as expected. -+Load: dtoverlay=gpio-no-bank0-irq -+Params: <None> -+ -+ -+Name: gpio-no-irq -+Info: Use this overlay to disable all GPIO interrupts, which can be useful -+ for user-space GPIO edge detection systems. -+Load: dtoverlay=gpio-no-irq -+Params: <None> -+ -+ -+Name: gpio-poweroff -+Info: Drives a GPIO high or low on poweroff (including halt). Enabling this -+ overlay will prevent the ability to boot by driving GPIO3 low. -+Load: dtoverlay=gpio-poweroff,<param>=<val> -+Params: gpiopin GPIO for signalling (default 26) -+ -+ active_low Set if the power control device requires a -+ high->low transition to trigger a power-down. -+ Note that this will require the support of a -+ custom dt-blob.bin to prevent a power-down -+ during the boot process, and that a reboot -+ will also cause the pin to go low. -+ input Set if the gpio pin should be configured as -+ an input. -+ export Set to export the configured pin to sysfs -+ -+ -+Name: gpio-shutdown -+Info: Initiates a shutdown when GPIO pin changes. The given GPIO pin -+ is configured as an input key that generates KEY_POWER events. -+ This event is handled by systemd-logind by initiating a -+ shutdown. Systemd versions older than 225 need an udev rule -+ enable listening to the input device: -+ -+ ACTION!="REMOVE", SUBSYSTEM=="input", KERNEL=="event*", \ -+ SUBSYSTEMS=="platform", DRIVERS=="gpio-keys", \ -+ ATTRS{keys}=="116", TAG+="power-switch" -+ -+ This overlay only handles shutdown. After shutdown, the system -+ can be powered up again by driving GPIO3 low. The default -+ configuration uses GPIO3 with a pullup, so if you connect a -+ button between GPIO3 and GND (pin 5 and 6 on the 40-pin header), -+ you get a shutdown and power-up button. -+Load: dtoverlay=gpio-shutdown,<param>=<val> -+Params: gpio_pin GPIO pin to trigger on (default 3) -+ -+ active_low When this is 1 (active low), a falling -+ edge generates a key down event and a -+ rising edge generates a key up event. -+ When this is 0 (active high), this is -+ reversed. The default is 1 (active low). -+ -+ gpio_pull Desired pull-up/down state (off, down, up) -+ Default is "up". -+ -+ Note that the default pin (GPIO3) has an -+ external pullup. -+ -+ debounce Specify the debounce interval in milliseconds -+ (default 100) -+ -+ -+Name: hd44780-lcd -+Info: Configures an HD44780 compatible LCD display. Uses 4 gpio pins for -+ data, 2 gpio pins for enable and register select and 1 optional pin -+ for enabling/disabling the backlight display. -+Load: dtoverlay=hd44780-lcd,<param>=<val> -+Params: pin_d4 GPIO pin for data pin D4 (default 6) -+ -+ pin_d5 GPIO pin for data pin D5 (default 13) -+ -+ pin_d6 GPIO pin for data pin D6 (default 19) -+ -+ pin_d7 GPIO pin for data pin D7 (default 26) -+ -+ pin_en GPIO pin for "Enable" (default 21) -+ -+ pin_rs GPIO pin for "Register Select" (default 20) -+ -+ pin_bl Optional pin for enabling/disabling the -+ display backlight. (default disabled) -+ -+ display_height Height of the display in characters -+ -+ display_width Width of the display in characters -+ -+ -+Name: hifiberry-amp -+Info: Configures the HifiBerry Amp and Amp+ audio cards -+Load: dtoverlay=hifiberry-amp -+Params: <None> -+ -+ -+Name: hifiberry-dac -+Info: Configures the HifiBerry DAC audio card -+Load: dtoverlay=hifiberry-dac -+Params: <None> -+ -+ -+Name: hifiberry-dacplus -+Info: Configures the HifiBerry DAC+ audio card -+Load: dtoverlay=hifiberry-dacplus,<param>=<val> -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=hifiberry-dacplus,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24dB_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ slave Force DAC+ Pro into slave mode, using Pi as -+ master for bit clock and frame clock. -+ -+ -+Name: hifiberry-dacplusadc -+Info: Configures the HifiBerry DAC+ADC audio card -+Load: dtoverlay=hifiberry-dacplusadc,<param>=<val> -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=hifiberry-dacplus,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24dB_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ slave Force DAC+ Pro into slave mode, using Pi as -+ master for bit clock and frame clock. -+ -+ -+Name: hifiberry-dacplusadcpro -+Info: Configures the HifiBerry DAC+ADC PRO audio card -+Load: dtoverlay=hifiberry-dacplusadcpro,<param>=<val> -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=hifiberry-dacplusadcpro,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24dB_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ slave Force DAC+ADC Pro into slave mode, using Pi as -+ master for bit clock and frame clock. -+ -+ -+Name: hifiberry-dacplusdsp -+Info: Configures the HifiBerry DAC+DSP audio card -+Load: dtoverlay=hifiberry-dacplusdsp -+Params: <None> -+ -+ -+Name: hifiberry-digi -+Info: Configures the HifiBerry Digi and Digi+ audio card -+Load: dtoverlay=hifiberry-digi -+Params: <None> -+ -+ -+Name: hifiberry-digi-pro -+Info: Configures the HifiBerry Digi+ Pro audio card -+Load: dtoverlay=hifiberry-digi-pro -+Params: <None> -+ -+ -+Name: hy28a -+Info: HY28A - 2.8" TFT LCD Display Module by HAOYU Electronics -+ Default values match Texy's display shield -+Load: dtoverlay=hy28a,<param>=<val> -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ xohms Touchpanel sensitivity (X-plate resistance) -+ -+ resetgpio GPIO used to reset controller -+ -+ ledgpio GPIO used to control backlight -+ -+ -+Name: hy28b -+Info: HY28B - 2.8" TFT LCD Display Module by HAOYU Electronics -+ Default values match Texy's display shield -+Load: dtoverlay=hy28b,<param>=<val> -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ xohms Touchpanel sensitivity (X-plate resistance) -+ -+ resetgpio GPIO used to reset controller -+ -+ ledgpio GPIO used to control backlight -+ -+ -+Name: hy28b-2017 -+Info: HY28B 2017 version - 2.8" TFT LCD Display Module by HAOYU Electronics -+ Default values match Texy's display shield -+Load: dtoverlay=hy28b-2017,<param>=<val> -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ xohms Touchpanel sensitivity (X-plate resistance) -+ -+ resetgpio GPIO used to reset controller -+ -+ ledgpio GPIO used to control backlight -+ -+ -+Name: i-sabre-q2m -+Info: Configures the Audiophonics I-SABRE Q2M DAC -+Load: dtoverlay=i-sabre-q2m -+Params: <None> -+ -+ -+Name: i2c-bcm2708 -+Info: Fall back to the i2c_bcm2708 driver for the i2c_arm bus. -+Load: dtoverlay=i2c-bcm2708 -+Params: <None> -+ -+ -+Name: i2c-gpio -+Info: Adds support for software i2c controller on gpio pins -+Load: dtoverlay=i2c-gpio,<param>=<val> -+Params: i2c_gpio_sda GPIO used for I2C data (default "23") -+ -+ i2c_gpio_scl GPIO used for I2C clock (default "24") -+ -+ i2c_gpio_delay_us Clock delay in microseconds -+ (default "2" = ~100kHz) -+ -+ bus Set to a unique, non-zero value if wanting -+ multiple i2c-gpio busses. If set, will be used -+ as the preferred bus number (/dev/i2c-<n>). If -+ not set, the default value is 0, but the bus -+ number will be dynamically assigned - probably -+ 3. -+ -+ -+Name: i2c-mux -+Info: Adds support for a number of I2C bus multiplexers on i2c_arm -+Load: dtoverlay=i2c-mux,<param>=<val> -+Params: pca9542 Select the NXP PCA9542 device -+ -+ pca9545 Select the NXP PCA9545 device -+ -+ pca9548 Select the NXP PCA9548 device -+ -+ addr Change I2C address of the device (default 0x70) -+ -+ -+[ The i2c-mux-pca9548a overlay has been deleted. See i2c-mux. ] -+ -+ -+Name: i2c-pwm-pca9685a -+Info: Adds support for an NXP PCA9685A I2C PWM controller on i2c_arm -+Load: dtoverlay=i2c-pwm-pca9685a,<param>=<val> -+Params: addr I2C address of PCA9685A (default 0x40) -+ -+ -+Name: i2c-rtc -+Info: Adds support for a number of I2C Real Time Clock devices -+Load: dtoverlay=i2c-rtc,<param>=<val> -+Params: abx80x Select one of the ABx80x family: -+ AB0801, AB0803, AB0804, AB0805, -+ AB1801, AB1803, AB1804, AB1805 -+ -+ ds1307 Select the DS1307 device -+ -+ ds1339 Select the DS1339 device -+ -+ ds3231 Select the DS3231 device -+ -+ m41t62 Select the M41T62 device -+ -+ mcp7940x Select the MCP7940x device -+ -+ mcp7941x Select the MCP7941x device -+ -+ pcf2127 Select the PCF2127 device -+ -+ pcf2129 Select the PCF2129 device -+ -+ pcf8523 Select the PCF8523 device -+ -+ pcf8563 Select the PCF8563 device -+ -+ rv3028 Select the Micro Crystal RV3028 device -+ -+ addr Sets the address for the RTC. Note that the -+ device must be configured to use the specified -+ address. -+ -+ trickle-diode-type Diode type for trickle charge - "standard" or -+ "schottky" (ABx80x only) -+ -+ trickle-resistor-ohms Resistor value for trickle charge (DS1339, -+ ABx80x, RV3028) -+ -+ wakeup-source Specify that the RTC can be used as a wakeup -+ source -+ -+ backup-switchover-mode Backup power supply switch mode. Must be 0 for -+ off or 1 for Vdd < VBackup (RV3028 only) -+ -+ -+Name: i2c-rtc-gpio -+Info: Adds support for a number of I2C Real Time Clock devices -+ using the software i2c controller -+Load: dtoverlay=i2c-rtc-gpio,<param>=<val> -+Params: abx80x Select one of the ABx80x family: -+ AB0801, AB0803, AB0804, AB0805, -+ AB1801, AB1803, AB1804, AB1805 -+ -+ ds1307 Select the DS1307 device -+ -+ ds1339 Select the DS1339 device -+ -+ ds3231 Select the DS3231 device -+ -+ m41t62 Select the M41T62 device -+ -+ mcp7940x Select the MCP7940x device -+ -+ mcp7941x Select the MCP7941x device -+ -+ pcf2127 Select the PCF2127 device -+ -+ pcf2129 Select the PCF2129 device -+ -+ pcf8523 Select the PCF8523 device -+ -+ pcf8563 Select the PCF8563 device -+ -+ rv3028 Select the Micro Crystal RV3028 device -+ -+ addr Sets the address for the RTC. Note that the -+ device must be configured to use the specified -+ address. -+ -+ trickle-diode-type Diode type for trickle charge - "standard" or -+ "schottky" (ABx80x only) -+ -+ trickle-resistor-ohms Resistor value for trickle charge (DS1339, -+ ABx80x, RV3028) -+ -+ wakeup-source Specify that the RTC can be used as a wakeup -+ source -+ -+ backup-switchover-mode Backup power supply switch mode. Must be 0 for -+ off or 1 for Vdd < VBackup (RV3028 only) -+ -+ i2c_gpio_sda GPIO used for I2C data (default "23") -+ -+ i2c_gpio_scl GPIO used for I2C clock (default "24") -+ -+ i2c_gpio_delay_us Clock delay in microseconds -+ (default "2" = ~100kHz) -+ -+ -+Name: i2c-sensor -+Info: Adds support for a number of I2C barometric pressure and temperature -+ sensors on i2c_arm -+Load: dtoverlay=i2c-sensor,<param>=<val> -+Params: addr Set the address for the BME280, BMP280, DS1621, -+ HDC100X, LM75, SHT3x or TMP102 -+ -+ bme280 Select the Bosch Sensortronic BME280 -+ Valid addresses 0x76-0x77, default 0x76 -+ -+ bmp085 Select the Bosch Sensortronic BMP085 -+ -+ bmp180 Select the Bosch Sensortronic BMP180 -+ -+ bmp280 Select the Bosch Sensortronic BMP280 -+ Valid addresses 0x76-0x77, default 0x76 -+ -+ ds1621 Select the Dallas Semiconductors DS1621 temp -+ sensor. Valid addresses 0x48-0x4f, default 0x48 -+ -+ hdc100x Select the Texas Instruments HDC100x temp sensor -+ Valid addresses 0x40-0x43, default 0x40 -+ -+ htu21 Select the HTU21 temperature and humidity sensor -+ -+ lm75 Select the Maxim LM75 temperature sensor -+ Valid addresses 0x48-0x4f, default 0x4f -+ -+ lm75addr Deprecated - use addr parameter instead -+ -+ max17040 Select the Maxim Integrated MAX17040 battery -+ monitor -+ -+ sht3x Select the Sensiron SHT3x temperature and -+ humidity sensor. Valid addresses 0x44-0x45, -+ default 0x44 -+ -+ si7020 Select the Silicon Labs Si7013/20/21 humidity/ -+ temperature sensor -+ -+ tmp102 Select the Texas Instruments TMP102 temp sensor -+ Valid addresses 0x48-0x4b, default 0x48 -+ -+ tsl4531 Select the AMS TSL4531 digital ambient light -+ sensor -+ -+ veml6070 Select the Vishay VEML6070 ultraviolet light -+ sensor -+ -+ -+Name: i2c0 -+Info: Change i2c0 pin usage. Not all pin combinations are usable on all -+ platforms - platforms other then Compute Modules can only use this -+ to disable transaction combining. -+Load: dtoverlay=i2c0,<param>=<val> -+Params: pins_0_1 Use pins 0 and 1 (default) -+ pins_28_29 Use pins 28 and 29 -+ pins_44_45 Use pins 44 and 45 -+ pins_46_47 Use pins 46 and 47 -+ combine Allow transactions to be combined (default -+ "yes") -+ -+ -+Name: i2c0-bcm2708 -+Info: Deprecated, legacy version of i2c0, from which it inherits its -+ parameters, just adding the explicit individual pin specifiers. -+Load: <Deprecated> -+Params: sda0_pin GPIO pin for SDA0 (deprecated - use pins_*) -+ scl0_pin GPIO pin for SCL0 (deprecated - use pins_*) -+ -+ -+Name: i2c1 -+Info: Change i2c1 pin usage. Not all pin combinations are usable on all -+ platforms - platforms other then Compute Modules can only use this -+ to disable transaction combining. -+Load: dtoverlay=i2c1,<param>=<val> -+Params: pins_2_3 Use pins 2 and 3 (default) -+ pins_44_45 Use pins 44 and 45 -+ combine Allow transactions to be combined (default -+ "yes") -+ -+ -+Name: i2c1-bcm2708 -+Info: Deprecated, legacy version of i2c1, from which it inherits its -+ parameters, just adding the explicit individual pin specifiers. -+Load: <Deprecated> -+Params: sda1_pin GPIO pin for SDA1 (2 or 44 - default 2) -+ scl1_pin GPIO pin for SCL1 (3 or 45 - default 3) -+ pin_func Alternative pin function (4 (alt0), 6 (alt2) - -+ default 4) -+ -+ -+Name: i2c3 -+Info: Enable the i2c3 bus -+Load: dtoverlay=i2c3,<param> -+Params: pins_2_3 Use GPIOs 2 and 3 -+ pins_4_5 Use GPIOs 4 and 5 (default) -+ baudrate Set the baudrate for the interface (default -+ "100000") -+ -+ -+Name: i2c4 -+Info: Enable the i2c4 bus -+Load: dtoverlay=i2c4,<param> -+Params: pins_6_7 Use GPIOs 6 and 7 -+ pins_8_9 Use GPIOs 8 and 9 (default) -+ baudrate Set the baudrate for the interface (default -+ "100000") -+ -+ -+Name: i2c5 -+Info: Enable the i2c5 bus -+Load: dtoverlay=i2c5,<param> -+Params: pins_10_11 Use GPIOs 10 and 11 -+ pins_12_13 Use GPIOs 12 and 13 (default) -+ baudrate Set the baudrate for the interface (default -+ "100000") -+ -+ -+Name: i2c6 -+Info: Enable the i2c6 bus -+Load: dtoverlay=i2c6,<param> -+Params: pins_0_1 Use GPIOs 0 and 1 -+ pins_22_23 Use GPIOs 22 and 23 (default) -+ baudrate Set the baudrate for the interface (default -+ "100000") -+ -+ -+Name: i2s-gpio28-31 -+Info: move I2S function block to GPIO 28 to 31 -+Load: dtoverlay=i2s-gpio28-31 -+Params: <None> -+ -+ -+Name: ilitek251x -+Info: Enables I2C connected Ilitek 251x multiple touch controller using -+ GPIO 4 (pin 7 on GPIO header) for interrupt. -+Load: dtoverlay=ilitek251x,<param>=<val> -+Params: interrupt GPIO used for interrupt (default 4) -+ sizex Touchscreen size x, horizontal resolution of -+ touchscreen (in pixels) -+ sizey Touchscreen size y, vertical resolution of -+ touchscreen (in pixels) -+ -+ -+Name: imx219 -+Info: Sony IMX219 camera module. -+ Uses Unicam 1, which is the standard camera connector on most Pi -+ variants. -+Load: dtoverlay=imx219,<param>=<val> -+Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. -+ Useful on Compute Modules. -+ -+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+ This is required for Pi B+, 2, 0, and 0W. -+ -+ -+Name: iqaudio-codec -+Info: Configures the IQaudio Codec audio card -+Load: dtoverlay=iqaudio-codec -+Params: <None> -+ -+ -+Name: iqaudio-dac -+Info: Configures the IQaudio DAC audio card -+Load: dtoverlay=iqaudio-dac,<param> -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=iqaudio-dac,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24db_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ -+ -+Name: iqaudio-dacplus -+Info: Configures the IQaudio DAC+ audio card -+Load: dtoverlay=iqaudio-dacplus,<param>=<val> -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=iqaudio-dacplus,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24db_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ auto_mute_amp If specified, unmute/mute the IQaudIO amp when -+ starting/stopping audio playback. -+ unmute_amp If specified, unmute the IQaudIO amp once when -+ the DAC driver module loads. -+ -+ -+Name: iqaudio-digi-wm8804-audio -+Info: Configures the IQAudIO Digi WM8804 audio card -+Load: dtoverlay=iqaudio-digi-wm8804-audio,<param>=<val> -+Params: card_name Override the default, "IQAudIODigi", card name. -+ dai_name Override the default, "IQAudIO Digi", dai name. -+ dai_stream_name Override the default, "IQAudIO Digi HiFi", -+ dai stream name. -+ -+ -+Name: irs1125 -+Info: Infineon irs1125 TOF camera module. -+ Uses Unicam 1, which is the standard camera connector on most Pi -+ variants. -+Load: dtoverlay=irs1125,<param>=<val> -+Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. -+ Useful on Compute Modules. -+ -+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+ This is required for Pi B+, 2, 0, and 0W. -+ -+ -+Name: jedec-spi-nor -+Info: Adds support for JEDEC-compliant SPI NOR flash devices. (Note: The -+ "jedec,spi-nor" kernel driver was formerly known as "m25p80".) -+Load: dtoverlay=jedec-spi-nor,<param>=<val> -+Params: flash-spi<n>-<m> Enables flash device on SPI<n>, CS#<m>. -+ flash-fastr-spi<n>-<m> Enables flash device with fast read capability -+ on SPI<n>, CS#<m>. -+ -+ -+Name: justboom-dac -+Info: Configures the JustBoom DAC HAT, Amp HAT, DAC Zero and Amp Zero audio -+ cards -+Load: dtoverlay=justboom-dac,<param>=<val> -+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec -+ Digital volume control. Enable with -+ "dtoverlay=justboom-dac,24db_digital_gain" -+ (The default behaviour is that the Digital -+ volume control is limited to a maximum of -+ 0dB. ie. it can attenuate but not provide -+ gain. For most users, this will be desired -+ as it will prevent clipping. By appending -+ the 24dB_digital_gain parameter, the Digital -+ volume control will allow up to 24dB of -+ gain. If this parameter is enabled, it is the -+ responsibility of the user to ensure that -+ the Digital volume control is set to a value -+ that does not result in clipping/distortion!) -+ -+ -+Name: justboom-digi -+Info: Configures the JustBoom Digi HAT and Digi Zero audio cards -+Load: dtoverlay=justboom-digi -+Params: <None> -+ -+ -+Name: lirc-rpi -+Info: This overlay has been deprecated and removed - see gpio-ir -+Load: <Deprecated> -+ -+ -+Name: ltc294x -+Info: Adds support for the ltc294x family of battery gauges -+Load: dtoverlay=ltc294x,<param>=<val> -+Params: ltc2941 Select the ltc2941 device -+ -+ ltc2942 Select the ltc2942 device -+ -+ ltc2943 Select the ltc2943 device -+ -+ ltc2944 Select the ltc2944 device -+ -+ resistor-sense The sense resistor value in milli-ohms. -+ Can be a 32-bit negative value when the battery -+ has been connected to the wrong end of the -+ resistor. -+ -+ prescaler-exponent Range and accuracy of the gauge. The value is -+ programmed into the chip only if it differs -+ from the current setting. -+ For LTC2941 only: -+ - Default value is 128 -+ - the exponent is in the range 0-7 (default 7) -+ See the datasheet for more information. -+ -+ -+Name: max98357a -+Info: Configures the Maxim MAX98357A I2S DAC -+Load: dtoverlay=max98357a,<param>=<val> -+Params: no-sdmode Driver does not manage the state of the DAC's -+ SD_MODE pin (i.e. chip is always on). -+ sdmode-pin integer, GPIO pin connected to the SD_MODE input -+ of the DAC (default GPIO4 if parameter omitted). -+ -+ -+Name: mbed-dac -+Info: Configures the mbed AudioCODEC (TLV320AIC23B) -+Load: dtoverlay=mbed-dac -+Params: <None> -+ -+ -+Name: mcp23017 -+Info: Configures the MCP23017 I2C GPIO expander -+Load: dtoverlay=mcp23017,<param>=<val> -+Params: gpiopin Gpio pin connected to the INTA output of the -+ MCP23017 (default: 4) -+ -+ addr I2C address of the MCP23017 (default: 0x20) -+ -+ mcp23008 Configure an MCP23008 instead. -+ noints Disable the interrupt GPIO line. -+ -+ -+Name: mcp23s17 -+Info: Configures the MCP23S08/17 SPI GPIO expanders. -+ If devices are present on SPI1 or SPI2, those interfaces must be enabled -+ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -+ If interrupts are enabled for a device on a given CS# on a SPI bus, that -+ device must be the only one present on that SPI bus/CS#. -+Load: dtoverlay=mcp23s17,<param>=<val> -+Params: s08-spi<n>-<m>-present 4-bit integer, bitmap indicating MCP23S08 -+ devices present on SPI<n>, CS#<m> -+ -+ s17-spi<n>-<m>-present 8-bit integer, bitmap indicating MCP23S17 -+ devices present on SPI<n>, CS#<m> -+ -+ s08-spi<n>-<m>-int-gpio integer, enables interrupts on a single -+ MCP23S08 device on SPI<n>, CS#<m>, specifies -+ the GPIO pin to which INT output of MCP23S08 -+ is connected. -+ -+ s17-spi<n>-<m>-int-gpio integer, enables mirrored interrupts on a -+ single MCP23S17 device on SPI<n>, CS#<m>, -+ specifies the GPIO pin to which either INTA -+ or INTB output of MCP23S17 is connected. -+ -+ -+Name: mcp2515-can0 -+Info: Configures the MCP2515 CAN controller on spi0.0 -+Load: dtoverlay=mcp2515-can0,<param>=<val> -+Params: oscillator Clock frequency for the CAN controller (Hz) -+ -+ spimaxfrequency Maximum SPI frequence (Hz) -+ -+ interrupt GPIO for interrupt signal -+ -+ -+Name: mcp2515-can1 -+Info: Configures the MCP2515 CAN controller on spi0.1 -+Load: dtoverlay=mcp2515-can1,<param>=<val> -+Params: oscillator Clock frequency for the CAN controller (Hz) -+ -+ spimaxfrequency Maximum SPI frequence (Hz) -+ -+ interrupt GPIO for interrupt signal -+ -+ -+Name: mcp3008 -+Info: Configures MCP3008 A/D converters -+ For devices on spi1 or spi2, the interfaces should be enabled -+ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -+Load: dtoverlay=mcp3008,<param>[=<val>] -+Params: spi<n>-<m>-present boolean, configure device at spi<n>, cs<m> -+ spi<n>-<m>-speed integer, set the spi bus speed for this device -+ -+ -+Name: mcp3202 -+Info: Configures MCP3202 A/D converters -+ For devices on spi1 or spi2, the interfaces should be enabled -+ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -+Load: dtoverlay=mcp3202,<param>[=<val>] -+Params: spi<n>-<m>-present boolean, configure device at spi<n>, cs<m> -+ spi<n>-<m>-speed integer, set the spi bus speed for this device -+ -+ -+Name: mcp342x -+Info: Overlay for activation of Microchip MCP3421-3428 ADCs over I2C -+Load: dtoverlay=mcp342x,<param>=<val> -+Params: addr I2C bus address of device, for devices with -+ addresses that are configurable, e.g. by -+ hardware links (default=0x68) -+ mcp3421 The device is an MCP3421 -+ mcp3422 The device is an MCP3422 -+ mcp3423 The device is an MCP3423 -+ mcp3424 The device is an MCP3424 -+ mcp3425 The device is an MCP3425 -+ mcp3426 The device is an MCP3426 -+ mcp3427 The device is an MCP3427 -+ mcp3428 The device is an MCP3428 -+ -+ -+Name: media-center -+Info: Media Center HAT - 2.83" Touch Display + extras by Pi Supply -+Load: dtoverlay=media-center,<param>=<val> -+Params: speed Display SPI bus speed -+ rotate Display rotation {0,90,180,270} -+ fps Delay between frame updates -+ xohms Touchpanel sensitivity (X-plate resistance) -+ swapxy Swap x and y axis -+ backlight Change backlight GPIO pin {e.g. 12, 18} -+ gpio_out_pin GPIO for output (default "17") -+ gpio_in_pin GPIO for input (default "18") -+ gpio_in_pull Pull up/down/off on the input pin -+ (default "down") -+ sense Override the IR receive auto-detection logic: -+ "0" = force active-high -+ "1" = force active-low -+ "-1" = use auto-detection -+ (default "-1") -+ softcarrier Turn the software carrier "on" or "off" -+ (default "on") -+ invert "on" = invert the output pin (default "off") -+ debug "on" = enable additional debug messages -+ (default "off") -+ -+ -+Name: midi-uart0 -+Info: Configures UART0 (ttyAMA0) so that a requested 38.4kbaud actually gets -+ 31.25kbaud, the frequency required for MIDI -+Load: dtoverlay=midi-uart0 -+Params: <None> -+ -+ -+Name: midi-uart1 -+Info: Configures UART1 (ttyS0) so that a requested 38.4kbaud actually gets -+ 31.25kbaud, the frequency required for MIDI -+Load: dtoverlay=midi-uart1 -+Params: <None> -+ -+ -+Name: miniuart-bt -+Info: Switch the onboard Bluetooth function on Pi 3B, 3B+, 3A+, 4B and Zero W -+ to use the mini-UART (ttyS0) and restore UART0/ttyAMA0 over GPIOs 14 & -+ 15. Note that this may reduce the maximum usable baudrate. -+ N.B. It is also necessary to edit /lib/systemd/system/hciuart.service -+ and replace ttyAMA0 with ttyS0, unless using Raspbian or another -+ distribution with udev rules that create /dev/serial0 and /dev/serial1, -+ in which case use /dev/serial1 instead because it will always be -+ correct. Furthermore, you must also set core_freq and core_freq_min to -+ the same value in config.txt or the miniuart will not work. -+Load: dtoverlay=miniuart-bt -+Params: <None> -+ -+ -+Name: mmc -+Info: Selects the bcm2835-mmc SD/MMC driver, optionally with overclock -+Load: dtoverlay=mmc,<param>=<val> -+Params: overclock_50 Clock (in MHz) to use when the MMC framework -+ requests 50MHz -+ -+ -+Name: mpu6050 -+Info: Overlay for i2c connected mpu6050 imu -+Load: dtoverlay=mpu6050,<param>=<val> -+Params: interrupt GPIO pin for interrupt (default 4) -+ -+ -+Name: mz61581 -+Info: MZ61581 display by Tontec -+Load: dtoverlay=mz61581,<param>=<val> -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ txbuflen Transmit buffer length (default 32768) -+ -+ debug Debug output level {0-7} -+ -+ xohms Touchpanel sensitivity (X-plate resistance) -+ -+ -+Name: ov5647 -+Info: Omnivision OV5647 camera module. -+ Uses Unicam 1, which is the standard camera connector on most Pi -+ variants. -+Load: dtoverlay=ov5647,<param>=<val> -+Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. -+ Useful on Compute Modules. -+ -+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+ This is required for Pi B+, 2, 0, and 0W. -+ -+ -+Name: papirus -+Info: PaPiRus ePaper Screen by Pi Supply (both HAT and pHAT) -+Load: dtoverlay=papirus,<param>=<val> -+Params: panel Display panel (required): -+ 1.44": e1144cs021 -+ 2.0": e2200cs021 -+ 2.7": e2271cs021 -+ -+ speed Display SPI bus speed -+ -+ -+[ The pcf2127-rtc overlay has been deleted. See i2c-rtc. ] -+ -+ -+[ The pcf8523-rtc overlay has been deleted. See i2c-rtc. ] -+ -+ -+[ The pcf8563-rtc overlay has been deleted. See i2c-rtc. ] -+ -+ -+Name: pi3-act-led -+Info: This overlay has been renamed act-led, keeping pi3-act-led as an alias -+ for backwards compatibility. -+Load: <Deprecated> -+ -+ -+Name: pi3-disable-bt -+Info: This overlay has been renamed disable-bt, keeping pi3-disable-bt as an -+ alias for backwards compatibility. -+Load: <Deprecated> -+ -+ -+Name: pi3-disable-wifi -+Info: This overlay has been renamed disable-wifi, keeping pi3-disable-wifi as -+ an alias for backwards compatibility. -+Load: <Deprecated> -+ -+ -+Name: pi3-miniuart-bt -+Info: This overlay has been renamed miniuart-bt, keeping pi3-miniuart-bt as -+ an alias for backwards compatibility. -+Load: <Deprecated> -+ -+ -+Name: pibell -+Info: Configures the pibell audio card. -+Load: dtoverlay=pibell,<param>=<val> -+Params: alsaname Set the name as it appears in ALSA (default -+ "PiBell") -+ -+ -+Name: piglow -+Info: Configures the PiGlow by pimoroni.com -+Load: dtoverlay=piglow -+Params: <None> -+ -+ -+Name: piscreen -+Info: PiScreen display by OzzMaker.com -+Load: dtoverlay=piscreen,<param>=<val> -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ xohms Touchpanel sensitivity (X-plate resistance) -+ -+ -+Name: piscreen2r -+Info: PiScreen 2 with resistive TP display by OzzMaker.com -+Load: dtoverlay=piscreen2r,<param>=<val> -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ xohms Touchpanel sensitivity (X-plate resistance) -+ -+ -+Name: pisound -+Info: Configures the Blokas Labs pisound card -+Load: dtoverlay=pisound -+Params: <None> -+ -+ -+Name: pitft22 -+Info: Adafruit PiTFT 2.2" screen -+Load: dtoverlay=pitft22,<param>=<val> -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ -+Name: pitft28-capacitive -+Info: Adafruit PiTFT 2.8" capacitive touch screen -+Load: dtoverlay=pitft28-capacitive,<param>=<val> -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ touch-sizex Touchscreen size x (default 240) -+ -+ touch-sizey Touchscreen size y (default 320) -+ -+ touch-invx Touchscreen inverted x axis -+ -+ touch-invy Touchscreen inverted y axis -+ -+ touch-swapxy Touchscreen swapped x y axis -+ -+ -+Name: pitft28-resistive -+Info: Adafruit PiTFT 2.8" resistive touch screen -+Load: dtoverlay=pitft28-resistive,<param>=<val> -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ -+Name: pitft35-resistive -+Info: Adafruit PiTFT 3.5" resistive touch screen -+Load: dtoverlay=pitft35-resistive,<param>=<val> -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ -+Name: pps-gpio -+Info: Configures the pps-gpio (pulse-per-second time signal via GPIO). -+Load: dtoverlay=pps-gpio,<param>=<val> -+Params: gpiopin Input GPIO (default "18") -+ assert_falling_edge When present, assert is indicated by a falling -+ edge, rather than by a rising edge (default -+ off) -+ capture_clear Generate clear events on the trailing edge -+ (default off) -+ -+ -+Name: pwm -+Info: Configures a single PWM channel -+ Legal pin,function combinations for each channel: -+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) -+ N.B.: -+ 1) Pin 18 is the only one available on all platforms, and -+ it is the one used by the I2S audio interface. -+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. -+ 2) The onboard analogue audio output uses both PWM channels. -+ 3) So be careful mixing audio and PWM. -+ 4) Currently the clock must have been enabled and configured -+ by other means. -+Load: dtoverlay=pwm,<param>=<val> -+Params: pin Output pin (default 18) - see table -+ func Pin function (default 2 = Alt5) - see above -+ clock PWM clock frequency (informational) -+ -+ -+Name: pwm-2chan -+Info: Configures both PWM channels -+ Legal pin,function combinations for each channel: -+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) -+ N.B.: -+ 1) Pin 18 is the only one available on all platforms, and -+ it is the one used by the I2S audio interface. -+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. -+ 2) The onboard analogue audio output uses both PWM channels. -+ 3) So be careful mixing audio and PWM. -+ 4) Currently the clock must have been enabled and configured -+ by other means. -+Load: dtoverlay=pwm-2chan,<param>=<val> -+Params: pin Output pin (default 18) - see table -+ pin2 Output pin for other channel (default 19) -+ func Pin function (default 2 = Alt5) - see above -+ func2 Function for pin2 (default 2 = Alt5) -+ clock PWM clock frequency (informational) -+ -+ -+Name: pwm-ir-tx -+Info: Use GPIO pin as pwm-assisted infrared transmitter output. -+ This is an alternative to "gpio-ir-tx". pwm-ir-tx makes use -+ of PWM0 to reduce the CPU load during transmission compared to -+ gpio-ir-tx which uses bit-banging. -+ Legal pin,function combinations are: -+ 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+Load: dtoverlay=pwm-ir-tx,<param>=<val> -+Params: gpio_pin Output GPIO (default 18) -+ -+ func Pin function (default 2 = Alt5) -+ -+ -+Name: qca7000 -+Info: I2SE's Evaluation Board for PLC Stamp micro -+Load: dtoverlay=qca7000,<param>=<val> -+Params: int_pin GPIO pin for interrupt signal (default 23) -+ -+ speed SPI bus speed (default 12 MHz) -+ -+ -+Name: rotary-encoder -+Info: Overlay for GPIO connected rotary encoder. -+Load: dtoverlay=rotary-encoder,<param>=<val> -+Params: pin_a GPIO connected to rotary encoder channel A -+ (default 4). -+ pin_b GPIO connected to rotary encoder channel B -+ (default 17). -+ relative_axis register a relative axis rather than an -+ absolute one. Relative axis will only -+ generate +1/-1 events on the input device, -+ hence no steps need to be passed. -+ linux_axis the input subsystem axis to map to this -+ rotary encoder. Defaults to 0 (ABS_X / REL_X) -+ rollover Automatic rollover when the rotary value -+ becomes greater than the specified steps or -+ smaller than 0. For absolute axis only. -+ steps-per-period Number of steps (stable states) per period. -+ The values have the following meaning: -+ 1: Full-period mode (default) -+ 2: Half-period mode -+ 4: Quarter-period mode -+ steps Number of steps in a full turnaround of the -+ encoder. Only relevant for absolute axis. -+ Defaults to 24 which is a typical value for -+ such devices. -+ wakeup Boolean, rotary encoder can wake up the -+ system. -+ encoding String, the method used to encode steps. -+ Supported are "gray" (the default and more -+ common) and "binary". -+ -+ -+Name: rpi-backlight -+Info: Raspberry Pi official display backlight driver -+Load: dtoverlay=rpi-backlight -+Params: <None> -+ -+ -+Name: rpi-cirrus-wm5102 -+Info: Configures the Cirrus Logic Audio Card -+Load: dtoverlay=rpi-cirrus-wm5102 -+Params: <None> -+ -+ -+Name: rpi-dac -+Info: Configures the RPi DAC audio card -+Load: dtoverlay=rpi-dac -+Params: <None> -+ -+ -+Name: rpi-display -+Info: RPi-Display - 2.8" Touch Display by Watterott -+Load: dtoverlay=rpi-display,<param>=<val> -+Params: speed Display SPI bus speed -+ rotate Display rotation {0,90,180,270} -+ fps Delay between frame updates -+ debug Debug output level {0-7} -+ xohms Touchpanel sensitivity (X-plate resistance) -+ swapxy Swap x and y axis -+ backlight Change backlight GPIO pin {e.g. 12, 18} -+ -+ -+Name: rpi-ft5406 -+Info: Official Raspberry Pi display touchscreen -+Load: dtoverlay=rpi-ft5406,<param>=<val> -+Params: touchscreen-size-x Touchscreen X resolution (default 800) -+ touchscreen-size-y Touchscreen Y resolution (default 600); -+ touchscreen-inverted-x Invert touchscreen X coordinates (default 0); -+ touchscreen-inverted-y Invert touchscreen Y coordinates (default 0); -+ touchscreen-swapped-x-y Swap X and Y cordinates (default 0); -+ -+ -+Name: rpi-poe -+Info: Raspberry Pi PoE HAT fan -+Load: dtoverlay=rpi-poe,<param>[=<val>] -+Params: poe_fan_temp0 Temperature (in millicelcius) at which the fan -+ turns on (default 50000) -+ poe_fan_temp0_hyst Temperature delta (in millicelcius) at which -+ the fan turns off (default 5000) -+ poe_fan_temp1 Temperature (in millicelcius) at which the fan -+ speeds up (default 55000) -+ poe_fan_temp1_hyst Temperature delta (in millicelcius) at which -+ the fan slows down (default 5000) -+ -+ -+Name: rpi-proto -+Info: Configures the RPi Proto audio card -+Load: dtoverlay=rpi-proto -+Params: <None> -+ -+ -+Name: rpi-sense -+Info: Raspberry Pi Sense HAT -+Load: dtoverlay=rpi-sense -+Params: <None> -+ -+ -+Name: rpi-tv -+Info: Raspberry Pi TV HAT -+Load: dtoverlay=rpi-tv -+Params: <None> -+ -+ -+Name: rra-digidac1-wm8741-audio -+Info: Configures the Red Rocks Audio DigiDAC1 soundcard -+Load: dtoverlay=rra-digidac1-wm8741-audio -+Params: <None> -+ -+ -+Name: sc16is750-i2c -+Info: Overlay for the NXP SC16IS750 UART with I2C Interface -+ Enables the chip on I2C1 at 0x48 (or the "addr" parameter value). To -+ select another address, please refer to table 10 in reference manual. -+Load: dtoverlay=sc16is750-i2c,<param>=<val> -+Params: int_pin GPIO used for IRQ (default 24) -+ addr Address (default 0x48) -+ xtal On-board crystal frequency (default 14745600) -+ -+ -+Name: sc16is752-i2c -+Info: Overlay for the NXP SC16IS752 dual UART with I2C Interface -+ Enables the chip on I2C1 at 0x48 (or the "addr" parameter value). To -+ select another address, please refer to table 10 in reference manual. -+Load: dtoverlay=sc16is752-i2c,<param>=<val> -+Params: int_pin GPIO used for IRQ (default 24) -+ addr Address (default 0x48) -+ xtal On-board crystal frequency (default 14745600) -+ -+ -+Name: sc16is752-spi1 -+Info: Overlay for the NXP SC16IS752 Dual UART with SPI Interface -+ Enables the chip on SPI1. -+ N.B.: spi1 is only accessible on devices with a 40pin header, eg: -+ A+, B+, Zero and PI2 B; as well as the Compute Module. -+ -+Load: dtoverlay=sc16is752-spi1,<param>=<val> -+Params: int_pin GPIO used for IRQ (default 24) -+ -+ -+Name: sdhost -+Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock. -+ N.B. This overlay is designed for situations where the mmc driver is -+ the default, so it disables the other (mmc) interface - this will kill -+ WiFi on a Pi3. If this isn't what you want, either use the sdtweak -+ overlay or the new sd_* dtparams of the base DTBs. -+Load: dtoverlay=sdhost,<param>=<val> -+Params: overclock_50 Clock (in MHz) to use when the MMC framework -+ requests 50MHz -+ -+ force_pio Disable DMA support (default off) -+ -+ pio_limit Number of blocks above which to use DMA -+ (default 1) -+ -+ debug Enable debug output (default off) -+ -+ -+Name: sdio -+Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, -+ and enables SDIO via GPIOs 22-27. An example of use in 1-bit mode is -+ "dtoverlay=sdio,bus_width=1,gpios_22_25" -+Load: dtoverlay=sdio,<param>=<val> -+Params: sdio_overclock SDIO Clock (in MHz) to use when the MMC -+ framework requests 50MHz -+ -+ poll_once Disable SDIO-device polling every second -+ (default on: polling once at boot-time) -+ -+ bus_width Set the SDIO host bus width (default 4 bits) -+ -+ gpios_22_25 Select GPIOs 22-25 for 1-bit mode. Must be used -+ with bus_width=1. This replaces the sdio-1bit -+ overlay, which is now deprecated. -+ -+ gpios_34_37 Select GPIOs 34-37 for 1-bit mode. Must be used -+ with bus_width=1. -+ -+ gpios_34_39 Select GPIOs 34-39 for 4-bit mode. Must be used -+ with bus_width=4 (the default). -+ -+ -+Name: sdio-1bit -+Info: This overlay is now deprecated. Use -+ "dtoverlay=sdio,bus_width=1,gpios_22_25" instead. -+Load: <Deprecated> -+ -+ -+Name: sdtweak -+Info: Tunes the bcm2835-sdhost SD/MMC driver -+ N.B. This functionality is now available via the sd_* dtparams in the -+ base DTB. -+Load: dtoverlay=sdtweak,<param>=<val> -+Params: overclock_50 Clock (in MHz) to use when the MMC framework -+ requests 50MHz -+ -+ force_pio Disable DMA support (default off) -+ -+ pio_limit Number of blocks above which to use DMA -+ (default 1) -+ -+ debug Enable debug output (default off) -+ -+ poll_once Looks for a card once after booting. Useful -+ for network booting scenarios to avoid the -+ overhead of continuous polling. N.B. Using -+ this option restricts the system to using a -+ single card per boot (or none at all). -+ (default off) -+ -+ enable Set to off to completely disable the interface -+ (default on) -+ -+ -+Name: smi -+Info: Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25! -+Load: dtoverlay=smi -+Params: <None> -+ -+ -+Name: smi-dev -+Info: Enables the userspace interface for the SMI driver -+Load: dtoverlay=smi-dev -+Params: <None> -+ -+ -+Name: smi-nand -+Info: Enables access to NAND flash via the SMI interface -+Load: dtoverlay=smi-nand -+Params: <None> -+ -+ -+Name: spi-gpio35-39 -+Info: Move SPI function block to GPIO 35 to 39 -+Load: dtoverlay=spi-gpio35-39 -+Params: <None> -+ -+ -+Name: spi-gpio40-45 -+Info: Move SPI function block to GPIOs 40 to 45 -+Load: dtoverlay=spi-gpio40-45 -+Params: <None> -+ -+ -+Name: spi-rtc -+Info: Adds support for a number of SPI Real Time Clock devices -+Load: dtoverlay=spi-rtc,<param>=<val> -+Params: pcf2123 Select the PCF2123 device -+ -+ -+Name: spi0-cs -+Info: Allows the (software) CS pins for SPI0 to be changed -+Load: dtoverlay=spi0-cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 8) -+ cs1_pin GPIO pin for CS1 (default 7) -+ -+ -+Name: spi0-hw-cs -+Info: Re-enables hardware CS/CE (chip selects) for SPI0 -+Load: dtoverlay=spi0-hw-cs -+Params: <None> -+ -+ -+Name: spi1-1cs -+Info: Enables spi1 with a single chip select (CS) line and associated spidev -+ dev node. The gpio pin number for the CS line and spidev device node -+ creation are configurable. -+ N.B.: spi1 is only accessible on devices with a 40pin header, eg: -+ A+, B+, Zero and PI2 B; as well as the Compute Module. -+Load: dtoverlay=spi1-1cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). -+ cs0_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev1.0 (default -+ is 'okay' or enabled). -+ -+ -+Name: spi1-2cs -+Info: Enables spi1 with two chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+ N.B.: spi1 is only accessible on devices with a 40pin header, eg: -+ A+, B+, Zero and PI2 B; as well as the Compute Module. -+Load: dtoverlay=spi1-2cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). -+ cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). -+ cs0_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev1.0 (default -+ is 'okay' or enabled). -+ cs1_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev1.1 (default -+ is 'okay' or enabled). -+ -+ -+Name: spi1-3cs -+Info: Enables spi1 with three chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+ N.B.: spi1 is only accessible on devices with a 40pin header, eg: -+ A+, B+, Zero and PI2 B; as well as the Compute Module. -+Load: dtoverlay=spi1-3cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). -+ cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). -+ cs2_pin GPIO pin for CS2 (default 16 - BCM SPI1_CE2). -+ cs0_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev1.0 (default -+ is 'okay' or enabled). -+ cs1_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev1.1 (default -+ is 'okay' or enabled). -+ cs2_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev1.2 (default -+ is 'okay' or enabled). -+ -+ -+Name: spi2-1cs -+Info: Enables spi2 with a single chip select (CS) line and associated spidev -+ dev node. The gpio pin number for the CS line and spidev device node -+ creation are configurable. -+ N.B.: spi2 is only accessible with the Compute Module. -+Load: dtoverlay=spi2-1cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). -+ cs0_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev2.0 (default -+ is 'okay' or enabled). -+ -+ -+Name: spi2-2cs -+Info: Enables spi2 with two chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+ N.B.: spi2 is only accessible with the Compute Module. -+Load: dtoverlay=spi2-2cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). -+ cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). -+ cs0_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev2.0 (default -+ is 'okay' or enabled). -+ cs1_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev2.1 (default -+ is 'okay' or enabled). -+ -+ -+Name: spi2-3cs -+Info: Enables spi2 with three chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+ N.B.: spi2 is only accessible with the Compute Module. -+Load: dtoverlay=spi2-3cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). -+ cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). -+ cs2_pin GPIO pin for CS2 (default 45 - BCM SPI2_CE2). -+ cs0_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev2.0 (default -+ is 'okay' or enabled). -+ cs1_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev2.1 (default -+ is 'okay' or enabled). -+ cs2_spidev Set to 'disabled' to stop the creation of a -+ userspace device node /dev/spidev2.2 (default -+ is 'okay' or enabled). -+ -+ -+Name: spi3-1cs -+Info: Enables spi3 with a single chip select (CS) line and associated spidev -+ dev node. The gpio pin number for the CS line and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi3-1cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev3.0 (default -+ is 'on' or enabled). -+ -+ -+Name: spi3-2cs -+Info: Enables spi3 with two chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi3-2cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0). -+ cs1_pin GPIO pin for CS1 (default 24 - BCM SPI3_CE1). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev3.0 (default -+ is 'on' or enabled). -+ cs1_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev3.1 (default -+ is 'on' or enabled). -+ -+ -+Name: spi4-1cs -+Info: Enables spi4 with a single chip select (CS) line and associated spidev -+ dev node. The gpio pin number for the CS line and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi4-1cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev4.0 (default -+ is 'on' or enabled). -+ -+ -+Name: spi4-2cs -+Info: Enables spi4 with two chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi4-2cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0). -+ cs1_pin GPIO pin for CS1 (default 25 - BCM SPI4_CE1). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev4.0 (default -+ is 'on' or enabled). -+ cs1_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev4.1 (default -+ is 'on' or enabled). -+ -+ -+Name: spi5-1cs -+Info: Enables spi5 with a single chip select (CS) line and associated spidev -+ dev node. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi5-1cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev5.0 (default -+ is 'on' or enabled). -+ -+ -+Name: spi5-2cs -+Info: Enables spi5 with two chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi5-2cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0). -+ cs1_pin GPIO pin for CS1 (default 26 - BCM SPI5_CE1). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev5.0 (default -+ is 'on' or enabled). -+ cs1_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev5.1 (default -+ is 'on' or enabled). -+ -+ -+Name: spi6-1cs -+Info: Enables spi6 with a single chip select (CS) line and associated spidev -+ dev node. The gpio pin number for the CS line and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi6-1cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI6_CE0). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev6.0 (default -+ is 'on' or enabled). -+ -+ -+Name: spi6-2cs -+Info: Enables spi6 with two chip select (CS) lines and associated spidev -+ dev nodes. The gpio pin numbers for the CS lines and spidev device node -+ creation are configurable. -+Load: dtoverlay=spi6-2cs,<param>=<val> -+Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI6_CE0). -+ cs1_pin GPIO pin for CS1 (default 27 - BCM SPI6_CE1). -+ cs0_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev6.0 (default -+ is 'on' or enabled). -+ cs1_spidev Set to 'off' to prevent the creation of a -+ userspace device node /dev/spidev6.1 (default -+ is 'on' or enabled). -+ -+ -+Name: ssd1306 -+Info: Overlay for activation of SSD1306 over I2C OLED display framebuffer. -+Load: dtoverlay=ssd1306,<param>=<val> -+Params: address Location in display memory of first character. -+ (default=0) -+ width Width of display. (default=128) -+ height Height of display. (default=64) -+ offset virtual channel a. (default=0) -+ normal Has no effect on displays tested. (default=not -+ set) -+ sequential Set this if every other scan line is missing. -+ (default=not set) -+ remapped Set this if display is garbled. (default=not -+ set) -+ inverted Set this if display is inverted and mirrored. -+ (default=not set) -+ -+ Examples: -+ Typical usage for 128x64 display: dtoverlay=ssd1306,inverted -+ -+ Typical usage for 128x32 display: dtoverlay=ssd1306,inverted,sequential -+ -+ i2c_baudrate=400000 will speed up the display. -+ -+ i2c_baudrate=1000000 seems to work even though it's not officially -+ supported by the hardware, and is faster still. -+ -+ For more information refer to the device datasheet at: -+ https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf -+ -+ -+Name: superaudioboard -+Info: Configures the SuperAudioBoard sound card -+Load: dtoverlay=superaudioboard,<param>=<val> -+Params: gpiopin GPIO pin for codec reset -+ -+ -+Name: sx150x -+Info: Configures the Semtech SX150X I2C GPIO expanders. -+Load: dtoverlay=sx150x,<param>=<val> -+Params: sx150<x>-<n>-<m> Enables SX150X device on I2C#<n> with slave -+ address <m>. <x> may be 1-9. <n> may be 0 or 1. -+ Permissible values of <m> (which is denoted in -+ hex) depend on the device variant. For SX1501, -+ SX1502, SX1504 and SX1505, <m> may be 20 or 21. -+ For SX1503 and SX1506, <m> may be 20. For -+ SX1507 and SX1509, <m> may be 3E, 3F, 70 or 71. -+ For SX1508, <m> may be 20, 21, 22 or 23. -+ -+ sx150<x>-<n>-<m>-int-gpio -+ Integer, enables interrupts on SX150X device on -+ I2C#<n> with slave address <m>, specifies -+ the GPIO pin to which NINT output of SX150X is -+ connected. -+ -+ -+Name: tc358743 -+Info: Toshiba TC358743 HDMI to CSI-2 bridge chip. -+ Uses Unicam 1, which is the standard camera connector on most Pi -+ variants. -+Load: dtoverlay=tc358743,<param>=<val> -+Params: 4lane Use 4 lanes (only applicable to Compute Modules -+ CAM1 connector). -+ -+ link-frequency Set the link frequency. Only values of 297000000 -+ (574Mbit/s) and 486000000 (972Mbit/s - default) -+ are supported by the driver. -+ -+ i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. -+ Useful on Compute Modules. -+ -+ i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. -+ This is required for Pi B+, 2, 0, and 0W. -+ -+ -+Name: tc358743-audio -+Info: Used in combination with the tc358743-fast overlay to route the audio -+ from the TC358743 over I2S to the Pi. -+ Wiring is LRCK/WFS to GPIO 19, BCK/SCK to GPIO 18, and DATA/SD to GPIO -+ 20. -+Load: dtoverlay=tc358743-audio,<param>=<val> -+Params: card-name Override the default, "tc358743", card name. -+ -+ -+Name: tinylcd35 -+Info: 3.5" Color TFT Display by www.tinylcd.com -+ Options: Touch, RTC, keypad -+Load: dtoverlay=tinylcd35,<param>=<val> -+Params: speed Display SPI bus speed -+ -+ rotate Display rotation {0,90,180,270} -+ -+ fps Delay between frame updates -+ -+ debug Debug output level {0-7} -+ -+ touch Enable touch panel -+ -+ touchgpio Touch controller IRQ GPIO -+ -+ xohms Touchpanel: Resistance of X-plate in ohms -+ -+ rtc-pcf PCF8563 Real Time Clock -+ -+ rtc-ds DS1307 Real Time Clock -+ -+ keypad Enable keypad -+ -+ Examples: -+ Display with touchpanel, PCF8563 RTC and keypad: -+ dtoverlay=tinylcd35,touch,rtc-pcf,keypad -+ Old touch display: -+ dtoverlay=tinylcd35,touch,touchgpio=3 -+ -+ -+Name: tpm-slb9670 -+Info: Enables support for Infineon SLB9670 Trusted Platform Module add-on -+ boards, which can be used as a secure key storage and hwrng, -+ available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by pi3g. -+Load: dtoverlay=tpm-slb9670 -+Params: <None> -+ -+ -+Name: uart0 -+Info: Change the pin usage of uart0 -+Load: dtoverlay=uart0,<param>=<val> -+Params: txd0_pin GPIO pin for TXD0 (14, 32 or 36 - default 14) -+ -+ rxd0_pin GPIO pin for RXD0 (15, 33 or 37 - default 15) -+ -+ pin_func Alternative pin function - 4(Alt0) for 14&15, -+ 7(Alt3) for 32&33, 6(Alt2) for 36&37 -+ -+ -+Name: uart1 -+Info: Change the pin usage of uart1 -+Load: dtoverlay=uart1,<param>=<val> -+Params: txd1_pin GPIO pin for TXD1 (14, 32 or 40 - default 14) -+ -+ rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) -+ -+ -+Name: uart2 -+Info: Enable uart 2 on GPIOs 0-3 -+Load: dtoverlay=uart2,<param> -+Params: ctsrts Enable CTS/RTS on GPIOs 2-3 (default off) -+ -+ -+Name: uart3 -+Info: Enable uart 3 on GPIOs 4-7 -+Load: dtoverlay=uart3,<param> -+Params: ctsrts Enable CTS/RTS on GPIOs 6-7 (default off) -+ -+ -+Name: uart4 -+Info: Enable uart 4 on GPIOs 8-11 -+Load: dtoverlay=uart4,<param> -+Params: ctsrts Enable CTS/RTS on GPIOs 10-11 (default off) -+ -+ -+Name: uart5 -+Info: Enable uart 5 on GPIOs 12-15 -+Load: dtoverlay=uart5,<param> -+Params: ctsrts Enable CTS/RTS on GPIOs 14-15 (default off) -+ -+ -+Name: udrc -+Info: Configures the NW Digital Radio UDRC Hat -+Load: dtoverlay=udrc,<param>=<val> -+Params: alsaname Name of the ALSA audio device (default "udrc") -+ -+ -+Name: upstream -+Info: Allow usage of downstream .dtb with upstream kernel. Comprises the -+ vc4-kms-v3d and dwc2 overlays. -+Load: dtoverlay=upstream -+Params: <None> -+ -+ -+Name: upstream-aux-interrupt -+Info: This overlay has been deprecated and removed because it is no longer -+ necessary. -+Load: <Deprecated> -+ -+ -+Name: vc4-fkms-v3d -+Info: Enable Eric Anholt's DRM VC4 V3D driver on top of the dispmanx -+ display stack. -+Load: dtoverlay=vc4-fkms-v3d,<param> -+Params: cma-256 CMA is 256MB (needs 1GB) -+ cma-192 CMA is 192MB (needs 1GB) -+ cma-128 CMA is 128MB -+ cma-96 CMA is 96MB -+ cma-64 CMA is 64MB -+ -+ -+Name: vc4-kms-kippah-7inch -+Info: Enable the Adafruit DPI Kippah with the 7" Ontat panel attached. -+ Requires vc4-kms-v3d to be loaded. -+Load: dtoverlay=vc4-kms-kippah-7inch -+Params: <None> -+ -+ -+Name: vc4-kms-v3d -+Info: Enable Eric Anholt's DRM VC4 HDMI/HVS/V3D driver. Running startx or -+ booting to GUI while this overlay is in use will cause interesting -+ lockups. -+Load: dtoverlay=vc4-kms-v3d,<param> -+Params: cma-256 CMA is 256MB (needs 1GB) -+ cma-192 CMA is 192MB (needs 1GB) -+ cma-128 CMA is 128MB -+ cma-96 CMA is 96MB -+ cma-64 CMA is 64MB -+ audio Enable or disable audio over HDMI (default "on") -+ -+ -+Name: vga666 -+Info: Overlay for the Fen Logic VGA666 board -+ This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds -+ after the kernel has started. -+Load: dtoverlay=vga666 -+Params: <None> -+ -+ -+Name: w1-gpio -+Info: Configures the w1-gpio Onewire interface module. -+ Use this overlay if you *don't* need a GPIO to drive an external pullup. -+Load: dtoverlay=w1-gpio,<param>=<val> -+Params: gpiopin GPIO for I/O (default "4") -+ pullup Now enabled by default (ignored) -+ -+ -+Name: w1-gpio-pullup -+Info: Configures the w1-gpio Onewire interface module. -+ Use this overlay if you *do* need a GPIO to drive an external pullup. -+Load: dtoverlay=w1-gpio-pullup,<param>=<val> -+Params: gpiopin GPIO for I/O (default "4") -+ extpullup GPIO for external pullup (default "5") -+ pullup Now enabled by default (ignored) -+ -+ -+Name: w5500 -+Info: Overlay for the Wiznet W5500 Ethernet Controller on SPI0 -+Load: dtoverlay=w5500,<param>=<val> -+Params: int_pin GPIO used for INT (default 25) -+ -+ speed SPI bus speed (default 30000000) -+ -+ cs SPI bus Chip Select (default 0) -+ -+ -+Name: wittypi -+Info: Configures the wittypi RTC module. -+Load: dtoverlay=wittypi,<param>=<val> -+Params: led_gpio GPIO for LED (default "17") -+ led_trigger Choose which activity the LED tracks (default -+ "default-on") -+ -+ -+Troubleshooting -+=============== -+ -+If you are experiencing problems that you think are DT-related, enable DT -+diagnostic output by adding this to /boot/config.txt: -+ -+ dtdebug=on -+ -+and rebooting. Then run: -+ -+ sudo vcdbg log msg -+ -+and look for relevant messages. -+ -+Further reading -+=============== -+ -+This is only meant to be a quick introduction to the subject of Device Tree on -+Raspberry Pi. There is a more complete explanation here: -+ -+http://www.raspberrypi.org/documentation/configuration/device-tree.md -diff --git a/arch/arm/boot/dts/overlays/act-led-overlay.dts b/arch/arm/boot/dts/overlays/act-led-overlay.dts -new file mode 100644 -index 000000000000..2f4bbb407f89 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/act-led-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed -+ from the VPU. There is a special driver for this with a separate DT node, -+ which has the unfortunate consequence of breaking the act_led_gpio and -+ act_led_activelow dtparams. -+ -+ This overlay changes the GPIO controller back to the standard one and -+ restores the dtparams. -+*/ -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&act_led>; -+ frag0: __overlay__ { -+ gpios = <&gpio 0 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ gpio = <&frag0>,"gpios:4"; -+ activelow = <&frag0>,"gpios:8"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts -new file mode 100644 -index 000000000000..298488e19156 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts -@@ -0,0 +1,40 @@ -+// Definitions for ADAU1977 ADC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c>; -+ -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ adau1977: codec@11 { -+ compatible = "adi,adau1977"; -+ reg = <0x11>; -+ reset-gpios = <&gpio 5 0>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "adi,adau1977-adc"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts b/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts -new file mode 100644 -index 000000000000..5fed769d2526 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts -@@ -0,0 +1,52 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ adau7002_codec: adau7002-codec { -+ #sound-dai-cells = <0>; -+ compatible = "adi,adau7002"; -+/* IOVDD-supply = <&supply>;*/ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ sound_overlay: __overlay__ { -+ compatible = "simple-audio-card"; -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,name = "adau7002"; -+ simple-audio-card,bitclock-slave = <&dailink0_slave>; -+ simple-audio-card,frame-slave = <&dailink0_slave>; -+ simple-audio-card,widgets = -+ "Microphone", "Microphone Jack"; -+ simple-audio-card,routing = -+ "PDM_DAT", "Microphone Jack"; -+ status = "okay"; -+ simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ }; -+ dailink0_slave: simple-audio-card,codec { -+ sound-dai = <&adau7002_codec>; -+ }; -+ }; -+ }; -+ -+ -+ __overrides__ { -+ card-name = <&sound_overlay>,"simple-audio-card,name"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/ads1015-overlay.dts b/arch/arm/boot/dts/overlays/ads1015-overlay.dts -new file mode 100644 -index 000000000000..26d68fccc6a8 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ads1015-overlay.dts -@@ -0,0 +1,98 @@ -+/* -+ * 2016 - Erik Sejr -+ */ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ /* ----------- ADS1015 ------------ */ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ ads1015: ads1015 { -+ compatible = "ti,ads1015"; -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x48>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "i2c_arm/ads1015"; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ channel_a: channel_a { -+ reg = <4>; -+ ti,gain = <2>; -+ ti,datarate = <4>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "i2c_arm/ads1015"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ channel_b: channel_b { -+ reg = <5>; -+ ti,gain = <2>; -+ ti,datarate = <4>; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "i2c_arm/ads1015"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ channel_c: channel_c { -+ reg = <6>; -+ ti,gain = <2>; -+ ti,datarate = <4>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "i2c_arm/ads1015"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ channel_d: channel_d { -+ reg = <7>; -+ ti,gain = <2>; -+ ti,datarate = <4>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ addr = <&ads1015>,"reg:0"; -+ cha_enable = <0>,"=1"; -+ cha_cfg = <&channel_a>,"reg:0"; -+ cha_gain = <&channel_a>,"ti,gain:0"; -+ cha_datarate = <&channel_a>,"ti,datarate:0"; -+ chb_enable = <0>,"=2"; -+ chb_cfg = <&channel_b>,"reg:0"; -+ chb_gain = <&channel_b>,"ti,gain:0"; -+ chb_datarate = <&channel_b>,"ti,datarate:0"; -+ chc_enable = <0>,"=3"; -+ chc_cfg = <&channel_c>,"reg:0"; -+ chc_gain = <&channel_c>,"ti,gain:0"; -+ chc_datarate = <&channel_c>,"ti,datarate:0"; -+ chd_enable = <0>,"=4"; -+ chd_cfg = <&channel_d>,"reg:0"; -+ chd_gain = <&channel_d>,"ti,gain:0"; -+ chd_datarate = <&channel_d>,"ti,datarate:0"; -+ }; -+ -+}; -diff --git a/arch/arm/boot/dts/overlays/ads1115-overlay.dts b/arch/arm/boot/dts/overlays/ads1115-overlay.dts -new file mode 100644 -index 000000000000..b380d925f0a5 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ads1115-overlay.dts -@@ -0,0 +1,103 @@ -+/* -+ * TI ADS1115 multi-channel ADC overlay -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ads1115: ads1115 { -+ compatible = "ti,ads1115"; -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x48>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "i2c_arm/ads1115"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ channel_a: channel_a { -+ reg = <4>; -+ ti,gain = <1>; -+ ti,datarate = <7>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "i2c_arm/ads1115"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ channel_b: channel_b { -+ reg = <5>; -+ ti,gain = <1>; -+ ti,datarate = <7>; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "i2c_arm/ads1115"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ channel_c: channel_c { -+ reg = <6>; -+ ti,gain = <1>; -+ ti,datarate = <7>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "i2c_arm/ads1115"; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ channel_d: channel_d { -+ reg = <7>; -+ ti,gain = <1>; -+ ti,datarate = <7>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ addr = <&ads1115>,"reg:0"; -+ cha_enable = <0>,"=1"; -+ cha_cfg = <&channel_a>,"reg:0"; -+ cha_gain = <&channel_a>,"ti,gain:0"; -+ cha_datarate = <&channel_a>,"ti,datarate:0"; -+ chb_enable = <0>,"=2"; -+ chb_cfg = <&channel_b>,"reg:0"; -+ chb_gain = <&channel_b>,"ti,gain:0"; -+ chb_datarate = <&channel_b>,"ti,datarate:0"; -+ chc_enable = <0>,"=3"; -+ chc_cfg = <&channel_c>,"reg:0"; -+ chc_gain = <&channel_c>,"ti,gain:0"; -+ chc_datarate = <&channel_c>,"ti,datarate:0"; -+ chd_enable = <0>,"=4"; -+ chd_cfg = <&channel_d>,"reg:0"; -+ chd_gain = <&channel_d>,"ti,gain:0"; -+ chd_datarate = <&channel_d>,"ti,datarate:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/ads7846-overlay.dts b/arch/arm/boot/dts/overlays/ads7846-overlay.dts -new file mode 100644 -index 000000000000..1c5c9b6bb6ff ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ads7846-overlay.dts -@@ -0,0 +1,89 @@ -+/* -+ * Generic Device Tree overlay for the ADS7846 touch controller -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ ads7846_pins: ads7846_pins { -+ brcm,pins = <255>; /* illegal default value */ -+ brcm,function = <0>; /* in */ -+ brcm,pull = <0>; /* none */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ads7846: ads7846@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ads7846_pins>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <255 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 255 0>; -+ -+ /* driver defaults */ -+ ti,x-min = /bits/ 16 <0>; -+ ti,y-min = /bits/ 16 <0>; -+ ti,x-max = /bits/ 16 <0x0FFF>; -+ ti,y-max = /bits/ 16 <0x0FFF>; -+ ti,pressure-min = /bits/ 16 <0>; -+ ti,pressure-max = /bits/ 16 <0xFFFF>; -+ ti,x-plate-ohms = /bits/ 16 <400>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ cs = <&ads7846>,"reg:0"; -+ speed = <&ads7846>,"spi-max-frequency:0"; -+ penirq = <&ads7846_pins>,"brcm,pins:0", /* REQUIRED */ -+ <&ads7846>,"interrupts:0", -+ <&ads7846>,"pendown-gpio:4"; -+ penirq_pull = <&ads7846_pins>,"brcm,pull:0"; -+ swapxy = <&ads7846>,"ti,swap-xy?"; -+ xmin = <&ads7846>,"ti,x-min;0"; -+ ymin = <&ads7846>,"ti,y-min;0"; -+ xmax = <&ads7846>,"ti,x-max;0"; -+ ymax = <&ads7846>,"ti,y-max;0"; -+ pmin = <&ads7846>,"ti,pressure-min;0"; -+ pmax = <&ads7846>,"ti,pressure-max;0"; -+ xohms = <&ads7846>,"ti,x-plate-ohms;0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/adv7282m-overlay.dts b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts -new file mode 100644 -index 000000000000..197c8f41a265 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/adv7282m-overlay.dts -@@ -0,0 +1,81 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions for Analog Devices ADV7282-M video to CSI2 bridge on VC I2C bus -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ adv728x: adv728x@21 { -+ compatible = "adi,adv7282-m"; -+ reg = <0x21>; -+ status = "okay"; -+ clock-frequency = <24000000>; -+ port { -+ adv728x_0: endpoint { -+ remote-endpoint = <&csi1_ep>; -+ clock-lanes = <0>; -+ data-lanes = <1>; -+ link-frequencies = -+ /bits/ 64 <297000000>; -+ -+ mclk-frequency = <12000000>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ fragment@1 { -+ target = <&csi1>; -+ __overlay__ { -+ status = "okay"; -+ -+ port { -+ csi1_ep: endpoint { -+ remote-endpoint = <&adv728x_0>; -+ }; -+ }; -+ }; -+ }; -+ fragment@2 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <28 29>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ -+ }; -+ fragment@3 { -+ target = <&i2c0_pins>; -+ __overlay__ { -+ brcm,pins = <44 45>; -+ brcm,function = <5>; /* alt1 */ -+ }; -+ }; -+ fragment@4 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@5 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ i2c_pins_0_1 = <0>,"-2-3+4"; -+ i2c_pins_28_29 = <0>,"+2-3-4"; -+ addr = <&adv728x>,"reg:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/adv728x-m-overlay.dts b/arch/arm/boot/dts/overlays/adv728x-m-overlay.dts -new file mode 100644 -index 000000000000..ea392e886984 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/adv728x-m-overlay.dts -@@ -0,0 +1,37 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions for Analog Devices ADV728[0|1|2]-M video to CSI2 bridges on VC -+// I2C bus -+ -+#include "adv7282m-overlay.dts" -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ // Fragment numbers deliberately high to avoid conflicts with the -+ // included adv7282m overlay file. -+ -+ fragment@101 { -+ target = <&adv728x>; -+ __dormant__ { -+ compatible = "adi,adv7280-m"; -+ }; -+ }; -+ fragment@102 { -+ target = <&adv728x>; -+ __dormant__ { -+ compatible = "adi,adv7281-m"; -+ }; -+ }; -+ fragment@103 { -+ target = <&adv728x>; -+ __dormant__ { -+ compatible = "adi,adv7281-ma"; -+ }; -+ }; -+ -+ __overrides__ { -+ adv7280m = <0>, "+101"; -+ adv7281m = <0>, "+102"; -+ adv7281ma = <0>, "+103"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts -new file mode 100644 -index 000000000000..82f9b3734fb1 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts -@@ -0,0 +1,49 @@ -+// Definitions for Digital Dreamtime Akkordion using IQaudIO DAC+ or DACZero -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4c { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4c>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ frag2: __overlay__ { -+ compatible = "iqaudio,iqaudio-dac"; -+ card_name = "Akkordion"; -+ dai_name = "IQaudIO DAC"; -+ dai_stream_name = "IQaudIO DAC HiFi"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts b/arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts -new file mode 100644 -index 000000000000..dd69916fcb3c ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts -@@ -0,0 +1,59 @@ -+/* -+ * Definitions for Allo Boss DAC board -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/clocks"; -+ __overlay__ { -+ boss_osc: boss_osc { -+ compatible = "allo,dac-clk"; -+ #clock-cells = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4d { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ clocks = <&boss_osc>; -+ reg = <0x4d>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ boss_dac: __overlay__ { -+ compatible = "allo,boss-dac"; -+ i2s-controller = <&i2s>; -+ mute-gpios = <&gpio 6 1>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = <&boss_dac>,"allo,24db_digital_gain?"; -+ slave = <&boss_dac>,"allo,slave?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/allo-digione-overlay.dts b/arch/arm/boot/dts/overlays/allo-digione-overlay.dts -new file mode 100644 -index 000000000000..ea018ace34d4 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/allo-digione-overlay.dts -@@ -0,0 +1,44 @@ -+// Definitions for Allo DigiOne -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8804@3b { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ PVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ status = "okay"; -+ wlf,reset-gpio = <&gpio 17 0>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "allo,allo-digione"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ clock44-gpio = <&gpio 5 0>; -+ clock48-gpio = <&gpio 6 0>; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts b/arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts -new file mode 100644 -index 000000000000..b25fd681f09f ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts -@@ -0,0 +1,57 @@ -+/* -+ * Definitions for Allo Katana DAC boards -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ #sound-dai-cells = <0>; -+ status = "okay"; -+ cpu_port: port { -+ cpu_endpoint: endpoint { -+ remote-endpoint = <&codec_endpoint>; -+ bitclock-master = <&codec_endpoint>; -+ frame-master = <&codec_endpoint>; -+ dai-format = "i2s"; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ allo-katana-codec@30 { -+ #sound-dai-cells = <0>; -+ compatible = "allo,allo-katana-codec"; -+ reg = <0x30>; -+ port { -+ codec_endpoint: endpoint { -+ remote-endpoint = <&cpu_endpoint>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ katana_dac: __overlay__ { -+ compatible = "audio-graph-card"; -+ label = "Allo Katana"; -+ dais = <&cpu_port>; -+ status = "okay"; -+ }; -+ }; -+}; -+ -diff --git a/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts b/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts -new file mode 100644 -index 000000000000..bfc66da6295a ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts -@@ -0,0 +1,54 @@ -+/* -+ * Definitions for Allo Piano DAC (2.0/2.1) boards -+ * -+ * NB. The Piano DAC 2.1 board contains 2x TI PCM5142 DAC's. One DAC is stereo -+ * (left/right) and the other provides a subwoofer output, using DSP on the -+ * chip for digital high/low pass crossover. -+ * The initial support for this hardware, that doesn't require any codec driver -+ * modifications, uses only one DAC chip for stereo (left/right) output, the -+ * chip with 0x4c slave address. The other chip at 0x4d is currently ignored! -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5142@4c { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5142"; -+ reg = <0x4c>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ piano_dac: __overlay__ { -+ compatible = "allo,piano-dac"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = -+ <&piano_dac>,"allo,24db_digital_gain?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts b/arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts -new file mode 100644 -index 000000000000..374c553db062 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts -@@ -0,0 +1,55 @@ -+// Definitions for Piano DAC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ allo_pcm5122_4c: pcm5122@4c { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4c>; -+ status = "okay"; -+ }; -+ allo_pcm5122_4d: pcm5122@4d { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4d>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ piano_dac: __overlay__ { -+ compatible = "allo,piano-dac-plus"; -+ audio-codec = <&allo_pcm5122_4c &allo_pcm5122_4d>; -+ i2s-controller = <&i2s>; -+ mute1-gpios = <&gpio 6 1>; -+ mute2-gpios = <&gpio 25 1>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = -+ <&piano_dac>,"allo,24db_digital_gain?"; -+ glb_mclk = -+ <&piano_dac>,"allo,glb_mclk?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/applepi-dac-overlay.dts b/arch/arm/boot/dts/overlays/applepi-dac-overlay.dts -new file mode 100644 -index 000000000000..4769296ec9d6 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/applepi-dac-overlay.dts -@@ -0,0 +1,57 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "simple-audio-card"; -+ simple-audio-card,name = "ApplePi-DAC"; -+ -+ status = "okay"; -+ -+ playback_link: simple-audio-card,dai-link@1 { -+ format = "i2s"; -+ -+ p_cpu_dai: cpu { -+ sound-dai = <&i2s>; -+ dai-tdm-slot-num = <2>; -+ dai-tdm-slot-width = <32>; -+ }; -+ -+ p_codec_dai: codec { -+ sound-dai = <&codec_out>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ codec_out: pcm1794a-codec { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm1794a"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2s>; -+ __overlay__ { -+ #sound-dai-cells = <0>; -+ status = "okay"; -+ }; -+ }; -+}; -+ -+/* -+ Written by: Leonid Ayzenshtat -+ Company: Orchard Audio (www.orchardaudio.com) -+ -+ compile with: -+ dtc -@ -H epapr -O dtb -o ApplePi-DAC.dtbo -W no-unit_address_vs_reg ApplePi-DAC.dts -+*/ -diff --git a/arch/arm/boot/dts/overlays/at86rf233-overlay.dts b/arch/arm/boot/dts/overlays/at86rf233-overlay.dts -new file mode 100644 -index 000000000000..5a3f4571ee78 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/at86rf233-overlay.dts -@@ -0,0 +1,57 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Overlay for Atmel AT86RF233 IEEE 802.15.4 WPAN transceiver on spi0.0 */ -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ lowpan0: at86rf233@0 { -+ compatible = "atmel,at86rf233"; -+ reg = <0>; -+ interrupt-parent = <&gpio>; -+ interrupts = <23 4>; /* active high */ -+ reset-gpio = <&gpio 24 1>; -+ sleep-gpio = <&gpio 25 1>; -+ spi-max-frequency = <3000000>; -+ xtal-trim = /bits/ 8 <0xf>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ lowpan0_pins: lowpan0_pins { -+ brcm,pins = <23 24 25>; -+ brcm,function = <0 1 1>; /* in out out */ -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ interrupt = <&lowpan0>, "interrupts:0", -+ <&lowpan0_pins>, "brcm,pins:0"; -+ reset = <&lowpan0>, "reset-gpio:4", -+ <&lowpan0_pins>, "brcm,pins:4"; -+ sleep = <&lowpan0>, "sleep-gpio:4", -+ <&lowpan0_pins>, "brcm,pins:8"; -+ speed = <&lowpan0>, "spi-max-frequency:0"; -+ trim = <&lowpan0>, "xtal-trim.0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts b/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts -new file mode 100644 -index 000000000000..57a66eac8e9b ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts -@@ -0,0 +1,60 @@ -+// Definitions for audioinjector.net audio add on soundcard -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ cs42448_mclk: codec-mclk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <49152000>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ cs42448: cs42448@48 { -+ #sound-dai-cells = <0>; -+ compatible = "cirrus,cs42448"; -+ reg = <0x48>; -+ clocks = <&cs42448_mclk>; -+ clock-names = "mclk"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ snd: __overlay__ { -+ compatible = "ai,audioinjector-octo-soundcard"; -+ mult-gpios = <&gpio 27 0>, <&gpio 22 0>, <&gpio 23 0>, -+ <&gpio 24 0>; -+ reset-gpios = <&gpio 5 0>; -+ i2s-controller = <&i2s>; -+ codec = <&cs42448>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ non-stop-clocks = <&snd>, "non-stop-clocks?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts b/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts -new file mode 100644 -index 000000000000..fb4a4678a17a ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts -@@ -0,0 +1,71 @@ -+// Definitions for audioinjector.net audio add on soundcard -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ cs4265: cs4265@4e { -+ #sound-dai-cells = <0>; -+ compatible = "cirrus,cs4265"; -+ reg = <0x4e>; -+ reset-gpios = <&gpio 5 0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "simple-audio-card"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ -+ simple-audio-card,name = "audioinjector-ultra"; -+ -+ simple-audio-card,widgets = -+ "Line", "OUTPUTS", -+ "Line", "INPUTS"; -+ -+ simple-audio-card,routing = -+ "OUTPUTS","LINEOUTL", -+ "OUTPUTS","LINEOUTR", -+ "OUTPUTS","SPDIFOUT", -+ "LINEINL","INPUTS", -+ "LINEINR","INPUTS", -+ "MICL","INPUTS", -+ "MICR","INPUTS"; -+ -+ simple-audio-card,format = "i2s"; -+ -+ simple-audio-card,bitclock-master = <&sound_master>; -+ simple-audio-card,frame-master = <&sound_master>; -+ -+ simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ dai-tdm-slot-num = <2>; -+ dai-tdm-slot-width = <32>; -+ }; -+ -+ sound_master: simple-audio-card,codec { -+ sound-dai = <&cs4265>; -+ system-clock-frequency = <12288000>; -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts b/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts -new file mode 100644 -index 000000000000..68f4427d86c3 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for audioinjector.net audio add on soundcard -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8731@1a { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8731"; -+ reg = <0x1a>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "ai,audioinjector-pi-soundcard"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts b/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts -new file mode 100644 -index 000000000000..4b96a3a8a14a ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts -@@ -0,0 +1,82 @@ -+// Definitions for audiosense add on soundcard -+/dts-v1/; -+/plugin/; -+#include <dt-bindings/pinctrl/bcm2835.h> -+#include <dt-bindings/gpio/gpio.h> -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ codec_reg_1v8: codec-reg-1v8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "tlv320aic3204_1v8"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-always-on; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ codec_rst: codec-rst { -+ brcm,pins = <26>; -+ brcm,function = <BCM2835_FSEL_GPIO_OUT>; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ /* audio external oscillator */ -+ codec_osc: codec_osc { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <12000000>; /* 12 MHz */ -+ }; -+ -+ codec: tlv320aic32x4@18 { -+ #sound-dai-cells = <0>; -+ compatible = "ti,tlv320aic32x4"; -+ reg = <0x18>; -+ -+ clocks = <&codec_osc>; -+ clock-names = "mclk"; -+ -+ iov-supply = <&vdd_3v3_reg>; -+ ldoin-supply = <&vdd_3v3_reg>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ reset-gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; -+ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "as,audiosense-pi"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/audremap-overlay.dts b/arch/arm/boot/dts/overlays/audremap-overlay.dts -new file mode 100644 -index 000000000000..d624bb3a3fea ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/audremap-overlay.dts -@@ -0,0 +1,35 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&audio_pins>; -+ frag0: __overlay__ { -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&audio_pins>; -+ __overlay__ { -+ brcm,pins = < 12 13 >; -+ brcm,function = < 4 >; /* alt0 alt0 */ -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&audio_pins>; -+ __dormant__ { -+ brcm,pins = < 18 19 >; -+ brcm,function = < 2 >; /* alt5 alt5 */ -+ }; -+ }; -+ -+ __overrides__ { -+ swap_lr = <&frag0>, "swap_lr?"; -+ enable_jack = <&frag0>, "enable_jack?"; -+ pins_12_13 = <0>,"+1-2"; -+ pins_18_19 = <0>,"-1+2"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts -new file mode 100644 -index 000000000000..249c8202b2ed ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts -@@ -0,0 +1,122 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&mmcnr>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdio_pins>; -+ bus-width = <4>; -+ brcm,overclock-50 = <35>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ sdio_pins: sdio_pins { -+ brcm,pins = <34 35 36 37 38 39>; -+ brcm,function = <7>; /* ALT3 = SD1 */ -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ -+ power_ctrl_pins: power_ctrl_pins { -+ brcm,pins = <40>; -+ brcm,function = <1>; // out -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/"; -+ __overlay__ { -+ // We should switch to mmc-pwrseq-sd8787 after making it -+ // compatible with sd8887 -+ // Currently that module requires two GPIOs to function since it -+ // targets a slightly different chip -+ power_ctrl: power_ctrl { -+ compatible = "gpio-poweroff"; -+ gpios = <&gpio 40 1>; -+ force; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&power_ctrl_pins>; -+ }; -+ -+ i2c_soft: i2c@0 { -+ compatible = "i2c-gpio"; -+ gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>; -+ i2c-gpio,delay-us = <5>; -+ i2c-gpio,scl-open-drain; -+ i2c-gpio,sda-open-drain; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ sd8xxx-wlan { -+ drvdbg = <0x6>; -+ drv_mode = <0x1>; -+ cfg80211_wext = <0xf>; -+ sta_name = "wlan"; -+ wfd_name = "p2p"; -+ cal_data_cfg = "none"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c_soft>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ gpio_expander: gpio_expander@20 { -+ compatible = "nxp,pca9554"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ reg = <0x20>; -+ status = "okay"; -+ }; -+ -+ // rtc clock -+ ds1307: ds1307@68 { -+ compatible = "dallas,ds1307"; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ -+ // RGB LEDs (>= v1.1.0) -+ pca9633: pca9633@62 { -+ compatible = "nxp,pca9633"; -+ reg = <0x62>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ red@0 { -+ label = "red"; -+ reg = <0>; -+ linux,default-trigger = "none"; -+ }; -+ green@1 { -+ label = "green"; -+ reg = <1>; -+ linux,default-trigger = "none"; -+ }; -+ blue@2 { -+ label = "blue"; -+ reg = <2>; -+ linux,default-trigger = "none"; -+ }; -+ unused@3 { -+ label = "unused"; -+ reg = <3>; -+ linux,default-trigger = "none"; -+ }; -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts b/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts -new file mode 100644 -index 000000000000..26dbbdd03ce5 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts -@@ -0,0 +1,23 @@ -+// Definitions for BMP085/BMP180 digital barometric pressure and temperature sensors from Bosch Sensortec -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ bmp085@77 { -+ compatible = "bosch,bmp085"; -+ reg = <0x77>; -+ default-oversampling = <3>; -+ status = "okay"; -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/dht11-overlay.dts b/arch/arm/boot/dts/overlays/dht11-overlay.dts -new file mode 100644 -index 000000000000..8de67527e317 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dht11-overlay.dts -@@ -0,0 +1,39 @@ -+/* -+ * Overlay for the DHT11/21/22 humidity/temperature sensor modules. -+ */ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ -+ dht11: dht11@0 { -+ compatible = "dht11"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&dht11_pins>; -+ gpios = <&gpio 4 0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ dht11_pins: dht11_pins { -+ brcm,pins = <4>; -+ brcm,function = <0>; // in -+ brcm,pull = <0>; // off -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpiopin = <&dht11_pins>,"brcm,pins:0", -+ <&dht11>,"gpios:4"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts b/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts -new file mode 100644 -index 000000000000..d863e5c167cc ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for Dion Audio LOCO DAC-AMP -+ -+/* -+ * PCM5242 DAC (in hardware mode) and TPA3118 AMP. -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ pcm5102a-codec { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5102a"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "dionaudio,loco-pcm5242-tpa3118"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts b/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts -new file mode 100644 -index 000000000000..dfb8922a654b ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts -@@ -0,0 +1,49 @@ -+/* -+ * Definitions for Dion Audio LOCO-V2 DAC-AMP -+ * eg. dtoverlay=dionaudio-loco-v2 -+ * -+ * PCM5242 DAC (in software mode) and TPA3255 AMP. -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&sound>; -+ frag0: __overlay__ { -+ compatible = "dionaudio,dionaudio-loco-v2"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4c { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4d>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = <&frag0>,"dionaudio,24db_digital_gain?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/disable-bt-overlay.dts b/arch/arm/boot/dts/overlays/disable-bt-overlay.dts -new file mode 100644 -index 000000000000..2f1b655a133c ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/disable-bt-overlay.dts -@@ -0,0 +1,55 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15. -+ To disable the systemd service that initialises the modem so it doesn't use -+ the UART: -+ -+ sudo systemctl disable hciuart -+*/ -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&uart1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart0>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&uart0_pins>; -+ __overlay__ { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&bt_pins>; -+ __overlay__ { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "/aliases"; -+ __overlay__ { -+ serial0 = "/soc/serial@7e201000"; -+ serial1 = "/soc/serial@7e215040"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/disable-wifi-overlay.dts b/arch/arm/boot/dts/overlays/disable-wifi-overlay.dts -new file mode 100644 -index 000000000000..75e046463900 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/disable-wifi-overlay.dts -@@ -0,0 +1,20 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&mmc>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&mmcnr>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/dpi18-overlay.dts b/arch/arm/boot/dts/overlays/dpi18-overlay.dts -new file mode 100644 -index 000000000000..4abe5be744db ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dpi18-overlay.dts -@@ -0,0 +1,39 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ // There is no DPI driver module, but we need a platform device -+ // node (that doesn't already use pinctrl) to hang the pinctrl -+ // reference on - leds will do -+ -+ fragment@0 { -+ target = <&fb>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&dpi18_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&vc4>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&dpi18_pins>; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ dpi18_pins: dpi18_pins { -+ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 -+ 12 13 14 15 16 17 18 19 20 -+ 21>; -+ brcm,function = <6>; /* alt2 */ -+ brcm,pull = <0>; /* no pull */ -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/dpi24-overlay.dts b/arch/arm/boot/dts/overlays/dpi24-overlay.dts -new file mode 100644 -index 000000000000..44335cc81277 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dpi24-overlay.dts -@@ -0,0 +1,39 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ // There is no DPI driver module, but we need a platform device -+ // node (that doesn't already use pinctrl) to hang the pinctrl -+ // reference on - leds will do -+ -+ fragment@0 { -+ target = <&fb>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&dpi24_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&vc4>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&dpi24_pins>; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ dpi24_pins: dpi24_pins { -+ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 -+ 12 13 14 15 16 17 18 19 20 -+ 21 22 23 24 25 26 27>; -+ brcm,function = <6>; /* alt2 */ -+ brcm,pull = <0>; /* no pull */ -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/draws-overlay.dts b/arch/arm/boot/dts/overlays/draws-overlay.dts -new file mode 100644 -index 000000000000..32b665c3934b ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/draws-overlay.dts -@@ -0,0 +1,200 @@ -+#include <dt-bindings/clock/bcm2835.h> -+/* -+ * Device tree overlay for the DRAWS Hardware -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ regulators { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ udrc0_ldoin: udrc0_ldoin { -+ compatible = "regulator-fixed"; -+ regulator-name = "ldoin"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ }; -+ -+ pps: pps { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pps_pins>; -+ gpios = <&gpio 7 0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ tlv320aic32x4: tlv320aic32x4@18 { -+ compatible = "ti,tlv320aic32x4"; -+ reg = <0x18>; -+ #sound-dai-cells = <0>; -+ status = "okay"; -+ -+ clocks = <&clocks BCM2835_CLOCK_GP0>; -+ clock-names = "mclk"; -+ assigned-clocks = <&clocks BCM2835_CLOCK_GP0>; -+ assigned-clock-rates = <25000000>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gpclk0_pin &aic3204_reset>; -+ -+ reset-gpios = <&gpio 13 0>; -+ -+ iov-supply = <&udrc0_ldoin>; -+ ldoin-supply = <&udrc0_ldoin>; -+ }; -+ -+ sc16is752: sc16is752@50 { -+ compatible = "nxp,sc16is752"; -+ reg = <0x50>; -+ clocks = <&sc16is752_clk>; -+ interrupt-parent = <&gpio>; -+ interrupts = <17 2>; /* IRQ_TYPE_EDGE_FALLING */ -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sc16is752_irq>; -+ -+ sc16is752_clk: sc16is752_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <1843200>; -+ }; -+ }; -+ -+ tla2024: tla2024@48 { -+ compatible = "ti,ads1015"; -+ reg = <0x48>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ adc_ch4: channel@4 { -+ reg = <4>; -+ ti,gain = <1>; -+ ti,datarate = <4>; -+ }; -+ -+ adc_ch5: channel@5 { -+ reg = <5>; -+ ti,gain = <1>; -+ ti,datarate = <4>; -+ }; -+ -+ adc_ch6: channel@6 { -+ reg = <6>; -+ ti,gain = <2>; -+ ti,datarate = <4>; -+ }; -+ -+ adc_ch7: channel@7 { -+ reg = <7>; -+ ti,gain = <2>; -+ ti,datarate = <4>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ snd: __overlay__ { -+ compatible = "simple-audio-card"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ -+ simple-audio-card,name = "draws"; -+ simple-audio-card,format = "i2s"; -+ -+ simple-audio-card,bitclock-master = <&dailink0_master>; -+ simple-audio-card,frame-master = <&dailink0_master>; -+ -+ simple-audio-card,widgets = -+ "Line", "Line In", -+ "Line", "Line Out"; -+ -+ simple-audio-card,routing = -+ "IN1_R", "Line In", -+ "IN1_L", "Line In", -+ "CM_L", "Line In", -+ "CM_R", "Line In", -+ "Line Out", "LOR", -+ "Line Out", "LOL"; -+ -+ dailink0_master: simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ }; -+ -+ simple-audio-card,codec { -+ sound-dai = <&tlv320aic32x4>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&gpio>; -+ __overlay__ { -+ gpclk0_pin: gpclk0_pin { -+ brcm,pins = <4>; -+ brcm,function = <4>; -+ }; -+ -+ aic3204_reset: aic3204_reset { -+ brcm,pins = <13>; -+ brcm,function = <1>; -+ brcm,pull = <1>; -+ }; -+ -+ aic3204_gpio: aic3204_gpio { -+ brcm,pins = <26>; -+ }; -+ -+ sc16is752_irq: sc16is752_irq { -+ brcm,pins = <17>; -+ brcm,function = <0>; -+ brcm,pull = <2>; -+ }; -+ -+ pps_pins: pps_pins { -+ brcm,pins = <7>; -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ draws_adc_ch4_gain = <&adc_ch4>,"ti,gain:0"; -+ draws_adc_ch4_datarate = <&adc_ch4>,"ti,datarate:0"; -+ draws_adc_ch5_gain = <&adc_ch5>,"ti,gain:0"; -+ draws_adc_ch5_datarate = <&adc_ch5>,"ti,datarate:0"; -+ draws_adc_ch6_gain = <&adc_ch6>,"ti,gain:0"; -+ draws_adc_ch6_datarate = <&adc_ch6>,"ti,datarate:0"; -+ draws_adc_ch7_gain = <&adc_ch7>,"ti,gain:0"; -+ draws_adc_ch7_datarate = <&adc_ch7>,"ti,datarate:0"; -+ alsaname = <&snd>, "simple-audio-card,name"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts b/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts -new file mode 100644 -index 000000000000..78c5e9f85048 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts -@@ -0,0 +1,14 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&usb>; -+ __overlay__ { -+ compatible = "brcm,bcm2708-usb"; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/dwc2-overlay.dts b/arch/arm/boot/dts/overlays/dwc2-overlay.dts -new file mode 100644 -index 000000000000..732adbe3faaf ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/dwc2-overlay.dts -@@ -0,0 +1,26 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&usb>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ dwc2_usb: __overlay__ { -+ compatible = "brcm,bcm2835-usb"; -+ dr_mode = "otg"; -+ g-np-tx-fifo-size = <32>; -+ g-rx-fifo-size = <256>; -+ g-tx-fifo-size = <512 512 512 512 512 256 256>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ dr_mode = <&dwc2_usb>, "dr_mode"; -+ g-np-tx-fifo-size = <&dwc2_usb>,"g-np-tx-fifo-size:0"; -+ g-rx-fifo-size = <&dwc2_usb>,"g-rx-fifo-size:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/enc28j60-overlay.dts b/arch/arm/boot/dts/overlays/enc28j60-overlay.dts -new file mode 100644 -index 000000000000..7af5c2e607ea ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/enc28j60-overlay.dts -@@ -0,0 +1,53 @@ -+// Overlay for the Microchip ENC28J60 Ethernet Controller -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ eth1: enc28j60@0{ -+ compatible = "microchip,enc28j60"; -+ reg = <0>; /* CE0 */ -+ pinctrl-names = "default"; -+ pinctrl-0 = <ð1_pins>; -+ interrupt-parent = <&gpio>; -+ interrupts = <25 0x2>; /* falling edge */ -+ spi-max-frequency = <12000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ eth1_pins: eth1_pins { -+ brcm,pins = <25>; -+ brcm,function = <0>; /* in */ -+ brcm,pull = <0>; /* none */ -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ int_pin = <ð1>, "interrupts:0", -+ <ð1_pins>, "brcm,pins:0"; -+ speed = <ð1>, "spi-max-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts b/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts -new file mode 100644 -index 000000000000..17cb5b8fa485 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts -@@ -0,0 +1,47 @@ -+// Overlay for the Microchip ENC28J60 Ethernet Controller - SPI2 Compute Module -+// Interrupt pin: 39 -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi2>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ eth1: enc28j60@0{ -+ compatible = "microchip,enc28j60"; -+ reg = <0>; /* CE0 */ -+ pinctrl-names = "default"; -+ pinctrl-0 = <ð1_pins>; -+ interrupt-parent = <&gpio>; -+ interrupts = <39 0x2>; /* falling edge */ -+ spi-max-frequency = <12000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ eth1_pins: eth1_pins { -+ brcm,pins = <39>; -+ brcm,function = <0>; /* in */ -+ brcm,pull = <0>; /* none */ -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ int_pin = <ð1>, "interrupts:0", -+ <ð1_pins>, "brcm,pins:0"; -+ speed = <ð1>, "spi-max-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/exc3000-overlay.dts b/arch/arm/boot/dts/overlays/exc3000-overlay.dts -new file mode 100644 -index 000000000000..6f087fb20661 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/exc3000-overlay.dts -@@ -0,0 +1,48 @@ -+// Device tree overlay for I2C connected EETI EXC3000 multiple touch controller -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ exc3000_pins: exc3000_pins { -+ brcm,pins = <4>; // interrupt -+ brcm,function = <0>; // in -+ brcm,pull = <2>; // pull-up -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ exc3000: exc3000@2a { -+ compatible = "eeti,exc3000"; -+ reg = <0x2a>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&exc3000_pins>; -+ interrupt-parent = <&gpio>; -+ interrupts = <4 8>; // active low level-sensitive -+ touchscreen-size-x = <4096>; -+ touchscreen-size-y = <4096>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ interrupt = <&exc3000_pins>,"brcm,pins:0", -+ <&exc3000>,"interrupts:0"; -+ sizex = <&exc3000>,"touchscreen-size-x:0"; -+ sizey = <&exc3000>,"touchscreen-size-y:0"; -+ invx = <&exc3000>,"touchscreen-inverted-x?"; -+ invy = <&exc3000>,"touchscreen-inverted-y?"; -+ swapxy = <&exc3000>,"touchscreen-swapped-x-y?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts -new file mode 100644 -index 000000000000..1c3ec3e21a18 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts -@@ -0,0 +1,70 @@ -+// Definitions for Fe-Pi Audio -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&clocks>; -+ __overlay__ { -+ sgtl5000_mclk: sgtl5000_mclk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <12288000>; -+ clock-output-names = "sgtl5000-mclk"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&soc>; -+ __overlay__ { -+ reg_1v8: reg_1v8@0 { -+ compatible = "regulator-fixed"; -+ regulator-name = "1V8"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-always-on; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ sgtl5000@0a { -+ #sound-dai-cells = <0>; -+ compatible = "fsl,sgtl5000"; -+ reg = <0x0a>; -+ clocks = <&sgtl5000_mclk>; -+ micbias-resistor-k-ohms = <2>; -+ micbias-voltage-m-volts = <3000>; -+ VDDA-supply = <&vdd_3v3_reg>; -+ VDDIO-supply = <&vdd_3v3_reg>; -+ VDDD-supply = <®_1v8>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "fe-pi,fe-pi-audio"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/goodix-overlay.dts b/arch/arm/boot/dts/overlays/goodix-overlay.dts -new file mode 100644 -index 000000000000..8571527de49a ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/goodix-overlay.dts -@@ -0,0 +1,46 @@ -+// Device tree overlay for I2C connected Goodix gt9271 multiple touch controller -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ goodix_pins: goodix_pins { -+ brcm,pins = <4 17>; // interrupt and reset -+ brcm,function = <0 0>; // in -+ brcm,pull = <2 2>; // pull-up -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ gt9271: gt9271@14 { -+ compatible = "goodix,gt9271"; -+ reg = <0x14>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&goodix_pins>; -+ interrupt-parent = <&gpio>; -+ interrupts = <4 2>; // high-to-low edge triggered -+ irq-gpios = <&gpio 4 0>; // Pin7 on GPIO header -+ reset-gpios = <&gpio 17 0>; // Pin11 on GPIO header -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ interrupt = <&goodix_pins>,"brcm,pins:0", -+ <>9271>,"interrupts:0", -+ <>9271>,"irq-gpios:4"; -+ reset = <&goodix_pins>,"brcm,pins:4", -+ <>9271>,"reset-gpios:4"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts b/arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts -new file mode 100644 -index 000000000000..e443be1f9a0e ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts -@@ -0,0 +1,49 @@ -+// Definitions for Google voiceHAT v1 soundcard overlay -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ googlevoicehat_pins: googlevoicehat_pins { -+ brcm,pins = <16>; -+ brcm,function = <1>; /* out */ -+ brcm,pull = <0>; /* up */ -+ }; -+ }; -+ }; -+ -+ -+ fragment@2 { -+ target-path = "/"; -+ __overlay__ { -+ voicehat-codec { -+ #sound-dai-cells = <0>; -+ compatible = "google,voicehat"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&googlevoicehat_pins>; -+ sdmode-gpios= <&gpio 16 0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "googlevoicehat,googlevoicehat-soundcard"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts b/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts -new file mode 100644 -index 000000000000..0b14981b4824 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/gpio-fan-overlay.dts -@@ -0,0 +1,79 @@ -+/* -+ * Overlay for the Raspberry Pi GPIO Fan @ BCM GPIO12. -+ * References: -+ * - https://www.raspberrypi.org/forums/viewtopic.php?f=107&p=1367135#p1365084 -+ * -+ * Optional parameters: -+ * - "gpiopin" - BCM number of the pin driving the fan, default 12 (GPIO12); -+ * - "temp" - CPU temperature at which fan is started in millicelsius, default 55000; -+ * -+ * Requires: -+ * - kernel configurations: CONFIG_SENSORS_GPIO_FAN=m; -+ * - kernel rebuild; -+ * - N-MOSFET connected to gpiopin, 2N7002-[https://en.wikipedia.org/wiki/2N7000]; -+ * - DC Fan connected to N-MOSFET Drain terminal, a 12V fan is working fine and quite silently; -+ * [https://www.tme.eu/en/details/ee40101s1-999-a/dc12v-fans/sunon/ee40101s1-1000u-999/] -+ * -+ * ┌─────────────────────┐ -+ * │Fan negative terminal│ -+ * └┬────────────────────┘ -+ * │D -+ * G │──┘ -+ * [GPIO12]──────┤ │<─┐ 2N7002 -+ * │──┤ -+ * │S -+ * ─┴─ -+ * GND -+ * -+ * Build: -+ * - `sudo dtc -W no-unit_address_vs_reg -@ -I dts -O dtb -o /boot/overlays/gpio-fan.dtbo gpio-fan-overlay.dts` -+ * Activate: -+ * - sudo nano /boot/config.txt add "dtoverlay=gpio-fan" or "dtoverlay=gpio-fan,gpiopin=12,temp=45000" -+ * or -+ * - sudo sh -c 'printf "\n# Enable PI GPIO-Fan Default\ndtoverlay=gpio-fan\n" >> /boot/config.txt' -+ * - sudo sh -c 'printf "\n# Enable PI GPIO-Fan Custom\ntoverlay=gpio-fan,gpiopin=12,temp=45000\n" >> /boot/config.txt' -+ * -+ */ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ fan0: gpio-fan@0 { -+ compatible = "gpio-fan"; -+ gpios = <&gpio 12 0>; -+ gpio-fan,speed-map = <0 0>, -+ <5000 1>; -+ #cooling-cells = <2>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&cpu_thermal>; -+ polling-delay = <2000>; /* milliseconds */ -+ __overlay__ { -+ trips { -+ cpu_hot: trip-point@0 { -+ temperature = <55000>; /* (millicelsius) Fan started at 55°C */ -+ hysteresis = <10000>; /* (millicelsius) Fan stopped at 45°C */ -+ type = "active"; -+ }; -+ }; -+ cooling-maps { -+ map0 { -+ trip = <&cpu_hot>; -+ cooling-device = <&fan0 1 1>; -+ }; -+ }; -+ }; -+ }; -+ __overrides__ { -+ gpiopin = <&fan0>,"gpios:4", <&fan0>,"brcm,pins:0"; -+ temp = <&cpu_hot>,"temperature:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts -new file mode 100644 -index 000000000000..58f588498d68 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts -@@ -0,0 +1,48 @@ -+// Definitions for ir-gpio module -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ gpio_ir: ir-receiver@12 { -+ compatible = "gpio-ir-receiver"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gpio_ir_pins>; -+ -+ // pin number, high or low -+ gpios = <&gpio 18 1>; -+ -+ // parameter for keymap name -+ linux,rc-map-name = "rc-rc6-mce"; -+ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ gpio_ir_pins: gpio_ir_pins@12 { -+ brcm,pins = <18>; // pin 18 -+ brcm,function = <0>; // in -+ brcm,pull = <2>; // up -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ // parameters -+ gpio_pin = <&gpio_ir>,"gpios:4", // pin number -+ <&gpio_ir>,"reg:0", -+ <&gpio_ir_pins>,"brcm,pins:0", -+ <&gpio_ir_pins>,"reg:0"; -+ gpio_pull = <&gpio_ir_pins>,"brcm,pull:0"; // pull-up/down state -+ -+ rc-map-name = <&gpio_ir>,"linux,rc-map-name"; // default rc map -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts b/arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts -new file mode 100644 -index 000000000000..3625431b7560 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts -@@ -0,0 +1,36 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ gpio_ir_tx_pins: gpio_ir_tx_pins@12 { -+ brcm,pins = <18>; -+ brcm,function = <1>; // out -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ gpio_ir_tx: gpio-ir-transmitter@12 { -+ compatible = "gpio-ir-tx"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gpio_ir_tx_pins>; -+ gpios = <&gpio 18 0>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpio_pin = <&gpio_ir_tx>, "gpios:4", // pin number -+ <&gpio_ir_tx>, "reg:0", -+ <&gpio_ir_tx_pins>, "brcm,pins:0", -+ <&gpio_ir_tx_pins>, "reg:0"; -+ invert = <&gpio_ir_tx>, "gpios:8"; // 1 = active low -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/gpio-key-overlay.dts b/arch/arm/boot/dts/overlays/gpio-key-overlay.dts -new file mode 100644 -index 000000000000..2e7253d1d0ab ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/gpio-key-overlay.dts -@@ -0,0 +1,48 @@ -+// Definitions for gpio-key module -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ // Configure the gpio pin controller -+ target = <&gpio>; -+ __overlay__ { -+ pin_state: button_pins@0 { -+ brcm,pins = <3>; // gpio number -+ brcm,function = <0>; // 0 = input, 1 = output -+ brcm,pull = <2>; // 0 = none, 1 = pull down, 2 = pull up -+ }; -+ }; -+ }; -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ button: button@0 { -+ compatible = "gpio-keys"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pin_state>; -+ status = "okay"; -+ -+ key: key { -+ linux,code = <116>; -+ gpios = <&gpio 3 1>; -+ label = "KEY_POWER"; -+ }; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpio = <&key>,"gpios:4", -+ <&button>,"reg:0", -+ <&pin_state>,"brcm,pins:0", -+ <&pin_state>,"reg:0"; -+ label = <&key>,"label"; -+ keycode = <&key>,"linux,code:0"; -+ gpio_pull = <&pin_state>,"brcm,pull:0"; -+ active_low = <&key>,"gpios:8"; -+ }; -+ -+}; -diff --git a/arch/arm/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts b/arch/arm/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts -new file mode 100755 -index 000000000000..96cbe80820b7 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts -@@ -0,0 +1,14 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ // Configure the gpio pin controller -+ target = <&gpio>; -+ __overlay__ { -+ interrupts = <255 255>, <2 18>; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/gpio-no-irq-overlay.dts b/arch/arm/boot/dts/overlays/gpio-no-irq-overlay.dts -new file mode 100644 -index 000000000000..55f9bff3a8f6 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/gpio-no-irq-overlay.dts -@@ -0,0 +1,14 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ // Configure the gpio pin controller -+ target = <&gpio>; -+ __overlay__ { -+ interrupts; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts b/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts -new file mode 100644 -index 000000000000..bb8cd3bf264d ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts -@@ -0,0 +1,36 @@ -+// Definitions for gpio-poweroff module -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ power_ctrl: power_ctrl { -+ compatible = "gpio-poweroff"; -+ gpios = <&gpio 26 0>; -+ force; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ power_ctrl_pins: power_ctrl_pins { -+ brcm,pins = <26>; -+ brcm,function = <1>; // out -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpiopin = <&power_ctrl>,"gpios:4", -+ <&power_ctrl_pins>,"brcm,pins:0"; -+ active_low = <&power_ctrl>,"gpios:8"; -+ input = <&power_ctrl>,"input?"; -+ export = <&power_ctrl>,"export?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts b/arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts -new file mode 100644 -index 000000000000..db07ba67781d ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts -@@ -0,0 +1,82 @@ -+// Definitions for gpio-poweroff module -+/dts-v1/; -+/plugin/; -+ -+// This overlay sets up an input device that generates KEY_POWER events -+// when a given GPIO pin changes. It defaults to using GPIO3, which can -+// also be used to wake up (start) the Rpi again after shutdown. Since -+// wakeup is active-low, this defaults to active-low with a pullup -+// enabled, but all of this can be changed using overlay parameters (but -+// note that GPIO3 has an external pullup on at least some boards). -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ // Configure the gpio pin controller -+ target = <&gpio>; -+ __overlay__ { -+ // Define a pinctrl state, that sets up the gpio -+ // as an input with a pullup enabled. This does -+ // not take effect by itself, only when referenced -+ // by a "pinctrl client", as is done below. See: -+ // https://www.kernel.org/doc/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt -+ // https://www.kernel.org/doc/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt -+ pin_state: shutdown_button_pins { -+ brcm,pins = <3>; // gpio number -+ brcm,function = <0>; // 0 = input, 1 = output -+ brcm,pull = <2>; // 0 = none, 1 = pull down, 2 = pull up -+ }; -+ }; -+ }; -+ fragment@1 { -+ // Add a new device to the /soc devicetree node -+ target-path = "/soc"; -+ __overlay__ { -+ shutdown_button { -+ // Let the gpio-keys driver handle this device. See: -+ // https://www.kernel.org/doc/Documentation/devicetree/bindings/input/gpio-keys.txt -+ compatible = "gpio-keys"; -+ -+ // Declare a single pinctrl state (referencing the one declared above) and name it -+ // default, so it is activated automatically. -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pin_state>; -+ -+ // Enable this device -+ status = "okay"; -+ -+ // Define a single key, called "shutdown" that monitors the gpio and sends KEY_POWER -+ // (keycode 116, see -+ // https://github.com/torvalds/linux/blob/v4.12/include/uapi/linux/input-event-codes.h#L190) -+ button: shutdown { -+ label = "shutdown"; -+ linux,code = <116>; // KEY_POWER -+ gpios = <&gpio 3 1>; -+ debounce-interval = <100>; // ms -+ }; -+ }; -+ }; -+ }; -+ -+ // This defines parameters that can be specified when loading -+ // the overlay. Each foo = line specifies one parameter, named -+ // foo. The rest of the specification gives properties where the -+ // parameter value is inserted into (changing the values above -+ // or adding new ones). -+ __overrides__ { -+ // Allow overriding the GPIO number. -+ gpio_pin = <&button>,"gpios:4", -+ <&pin_state>,"brcm,pins:0"; -+ -+ // Allow changing the internal pullup/down state. 0 = none, 1 = pulldown, 2 = pullup -+ // Note that GPIO3 and GPIO2 are the I2c pins and have an external pullup (at least -+ // on some boards). -+ gpio_pull = <&pin_state>,"brcm,pull:0"; -+ -+ // Allow setting the active_low flag. 0 = active high, 1 = active low -+ active_low = <&button>,"gpios:8"; -+ debounce = <&button>,"debounce-interval:0"; -+ }; -+ -+}; -diff --git a/arch/arm/boot/dts/overlays/hd44780-lcd-overlay.dts b/arch/arm/boot/dts/overlays/hd44780-lcd-overlay.dts -new file mode 100644 -index 000000000000..ee726669ff51 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hd44780-lcd-overlay.dts -@@ -0,0 +1,46 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ lcd_screen: auxdisplay { -+ compatible = "hit,hd44780"; -+ -+ data-gpios = <&gpio 6 0>, -+ <&gpio 13 0>, -+ <&gpio 19 0>, -+ <&gpio 26 0>; -+ enable-gpios = <&gpio 21 0>; -+ rs-gpios = <&gpio 20 0>; -+ -+ display-height-chars = <2>; -+ display-width-chars = <16>; -+ }; -+ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&lcd_screen>; -+ __dormant__ { -+ backlight-gpios = <&gpio 12 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ pin_d4 = <&lcd_screen>,"data-gpios:4"; -+ pin_d5 = <&lcd_screen>,"data-gpios:16"; -+ pin_d6 = <&lcd_screen>,"data-gpios:28"; -+ pin_d7 = <&lcd_screen>,"data-gpios:40"; -+ pin_en = <&lcd_screen>,"enable-gpios:4"; -+ pin_rs = <&lcd_screen>,"rs-gpios:4"; -+ pin_bl = <0>,"+1", <&lcd_screen>,"backlight-gpios:4"; -+ display_height = <&lcd_screen>,"display-height-chars:0"; -+ display_width = <&lcd_screen>,"display-width-chars:0"; -+ }; -+ -+}; -diff --git a/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts -new file mode 100644 -index 000000000000..142518ab348b ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for HiFiBerry Amp/Amp+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ tas5713@1b { -+ #sound-dai-cells = <0>; -+ compatible = "ti,tas5713"; -+ reg = <0x1b>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "hifiberry,hifiberry-amp"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts -new file mode 100644 -index 000000000000..ea8a6c8f36c0 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts -@@ -0,0 +1,34 @@ -+// Definitions for HiFiBerry DAC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ pcm5102a-codec { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5102a"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "hifiberry,hifiberry-dac"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts -new file mode 100644 -index 000000000000..5cd14aac3e45 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts -@@ -0,0 +1,59 @@ -+// Definitions for HiFiBerry DAC+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/clocks"; -+ __overlay__ { -+ dacpro_osc: dacpro_osc { -+ compatible = "hifiberry,dacpro-clk"; -+ #clock-cells = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4d { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4d>; -+ clocks = <&dacpro_osc>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ hifiberry_dacplus: __overlay__ { -+ compatible = "hifiberry,hifiberry-dacplus"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = -+ <&hifiberry_dacplus>,"hifiberry,24db_digital_gain?"; -+ slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts -new file mode 100644 -index 000000000000..09adcea8fd37 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts -@@ -0,0 +1,71 @@ -+// Definitions for HiFiBerry DAC+ADC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/clocks"; -+ __overlay__ { -+ dacpro_osc: dacpro_osc { -+ compatible = "hifiberry,dacpro-clk"; -+ #clock-cells = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm_codec: pcm5122@4d { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4d>; -+ clocks = <&dacpro_osc>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "/"; -+ __overlay__ { -+ dmic { -+ #sound-dai-cells = <0>; -+ compatible = "dmic-codec"; -+ num-channels = <2>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&sound>; -+ hifiberry_dacplusadc: __overlay__ { -+ compatible = "hifiberry,hifiberry-dacplusadc"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = -+ <&hifiberry_dacplusadc>,"hifiberry,24db_digital_gain?"; -+ slave = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,slave?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts -new file mode 100644 -index 000000000000..00e5d450a88b ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts -@@ -0,0 +1,64 @@ -+// Definitions for HiFiBerry DAC+ADC PRO -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target-path = "/clocks"; -+ __overlay__ { -+ dacpro_osc: dacpro_osc { -+ compatible = "hifiberry,dacpro-clk"; -+ #clock-cells = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ hb_dac: pcm5122@4d { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4d>; -+ clocks = <&dacpro_osc>; -+ status = "okay"; -+ }; -+ hb_adc: pcm186x@4a { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm1863"; -+ reg = <0x4a>; -+ clocks = <&dacpro_osc>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ hifiberry_dacplusadcpro: __overlay__ { -+ compatible = "hifiberry,hifiberry-dacplusadcpro"; -+ audio-codec = <&hb_dac &hb_adc>; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = -+ <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,24db_digital_gain?"; -+ slave = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,slave?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts -new file mode 100644 -index 000000000000..63432e8b983f ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts -@@ -0,0 +1,34 @@ -+// Definitions for hifiberry DAC+DSP soundcard overlay -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ dacplusdsp-codec { -+ #sound-dai-cells = <0>; -+ compatible = "hifiberry,dacplusdsp"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "hifiberrydacplusdsp,hifiberrydacplusdsp-soundcard"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts -new file mode 100644 -index 000000000000..a2309a50e8d8 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts -@@ -0,0 +1,41 @@ -+// Definitions for HiFiBerry Digi -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8804@3b { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ PVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "hifiberry,hifiberry-digi"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts -new file mode 100644 -index 000000000000..83de602e76ba ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts -@@ -0,0 +1,43 @@ -+// Definitions for HiFiBerry Digi Pro -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8804@3b { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ PVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "hifiberry,hifiberry-digi"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ clock44-gpio = <&gpio 5 0>; -+ clock48-gpio = <&gpio 6 0>; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/hy28a-overlay.dts b/arch/arm/boot/dts/overlays/hy28a-overlay.dts -new file mode 100644 -index 000000000000..aa6463e6e749 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hy28a-overlay.dts -@@ -0,0 +1,93 @@ -+/* -+ * Device Tree overlay for HY28A display -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ hy28a_pins: hy28a_pins { -+ brcm,pins = <17 25 18>; -+ brcm,function = <0 1 1>; /* in out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hy28a: hy28a@0{ -+ compatible = "ilitek,ili9320"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&hy28a_pins>; -+ -+ spi-max-frequency = <32000000>; -+ spi-cpol; -+ spi-cpha; -+ rotate = <270>; -+ bgr; -+ fps = <50>; -+ buswidth = <8>; -+ startbyte = <0x70>; -+ reset-gpios = <&gpio 25 0>; -+ led-gpios = <&gpio 18 1>; -+ debug = <0>; -+ }; -+ -+ hy28a_ts: hy28a-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <17 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 17 0>; -+ ti,x-plate-ohms = /bits/ 16 <100>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&hy28a>,"spi-max-frequency:0"; -+ rotate = <&hy28a>,"rotate:0"; -+ fps = <&hy28a>,"fps:0"; -+ debug = <&hy28a>,"debug:0"; -+ xohms = <&hy28a_ts>,"ti,x-plate-ohms;0"; -+ resetgpio = <&hy28a>,"reset-gpios:4", -+ <&hy28a_pins>, "brcm,pins:4"; -+ ledgpio = <&hy28a>,"led-gpios:4", -+ <&hy28a_pins>, "brcm,pins:8"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts b/arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts -new file mode 100644 -index 000000000000..42b68b684bd0 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts -@@ -0,0 +1,152 @@ -+/* -+ * Device Tree overlay for HY28b display shield by Texy. -+ * Modified for 2017 version with ILI9325 D chip -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ hy28b_pins: hy28b_pins { -+ brcm,pins = <17 25 18>; -+ brcm,function = <0 1 1>; /* in out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hy28b: hy28b@0{ -+ compatible = "ilitek,ili9325"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&hy28b_pins>; -+ -+ spi-max-frequency = <48000000>; -+ spi-cpol; -+ spi-cpha; -+ rotate = <270>; -+ bgr; -+ fps = <50>; -+ buswidth = <8>; -+ startbyte = <0x70>; -+ reset-gpios = <&gpio 25 0>; -+ led-gpios = <&gpio 18 1>; -+ -+ init = <0x10000e5 0x78F0 -+ 0x1000001 0x0100 -+ 0x1000002 0x0700 -+ 0x1000003 0x1030 -+ 0x1000004 0x0000 -+ 0x1000008 0x0207 -+ 0x1000009 0x0000 -+ 0x100000a 0x0000 -+ 0x100000c 0x0000 -+ 0x100000d 0x0000 -+ 0x100000f 0x0000 -+ 0x1000010 0x0000 -+ 0x1000011 0x0007 -+ 0x1000012 0x0000 -+ 0x1000013 0x0000 -+ 0x1000007 0x0001 -+ 0x2000032 -+ 0x2000032 -+ 0x2000032 -+ 0x2000032 -+ 0x1000010 0x1090 -+ 0x1000011 0x0227 -+ 0x2000032 -+ 0x1000012 0x001f -+ 0x2000032 -+ 0x1000013 0x1500 -+ 0x1000029 0x0027 -+ 0x100002b 0x000d -+ 0x2000032 -+ 0x1000020 0x0000 -+ 0x1000021 0x0000 -+ 0x2000032 -+ 0x1000030 0x0000 -+ 0x1000031 0x0707 -+ 0x1000032 0x0307 -+ 0x1000035 0x0200 -+ 0x1000036 0x0008 -+ 0x1000037 0x0004 -+ 0x1000038 0x0000 -+ 0x1000039 0x0707 -+ 0x100003c 0x0002 -+ 0x100003d 0x1d04 -+ 0x1000050 0x0000 -+ 0x1000051 0x00ef -+ 0x1000052 0x0000 -+ 0x1000053 0x013f -+ 0x1000060 0xa700 -+ 0x1000061 0x0001 -+ 0x100006a 0x0000 -+ 0x1000080 0x0000 -+ 0x1000081 0x0000 -+ 0x1000082 0x0000 -+ 0x1000083 0x0000 -+ 0x1000084 0x0000 -+ 0x1000085 0x0000 -+ 0x1000090 0x0010 -+ 0x1000092 0x0600 -+ 0x1000007 0x0133>; -+ debug = <0>; -+ }; -+ -+ hy28b_ts: hy28b-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <17 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 17 0>; -+ ti,x-plate-ohms = /bits/ 16 <100>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&hy28b>,"spi-max-frequency:0"; -+ rotate = <&hy28b>,"rotate:0"; -+ fps = <&hy28b>,"fps:0"; -+ debug = <&hy28b>,"debug:0"; -+ xohms = <&hy28b_ts>,"ti,x-plate-ohms;0"; -+ resetgpio = <&hy28b>,"reset-gpios:4", -+ <&hy28b_pins>, "brcm,pins:4"; -+ ledgpio = <&hy28b>,"led-gpios:4", -+ <&hy28b_pins>, "brcm,pins:8"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/hy28b-overlay.dts b/arch/arm/boot/dts/overlays/hy28b-overlay.dts -new file mode 100644 -index 000000000000..2e5e20f327a3 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hy28b-overlay.dts -@@ -0,0 +1,148 @@ -+/* -+ * Device Tree overlay for HY28b display shield by Texy -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ hy28b_pins: hy28b_pins { -+ brcm,pins = <17 25 18>; -+ brcm,function = <0 1 1>; /* in out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hy28b: hy28b@0{ -+ compatible = "ilitek,ili9325"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&hy28b_pins>; -+ -+ spi-max-frequency = <48000000>; -+ spi-cpol; -+ spi-cpha; -+ rotate = <270>; -+ bgr; -+ fps = <50>; -+ buswidth = <8>; -+ startbyte = <0x70>; -+ reset-gpios = <&gpio 25 0>; -+ led-gpios = <&gpio 18 1>; -+ -+ gamma = "04 1F 4 7 7 0 7 7 6 0\n0F 00 1 7 4 0 0 0 6 7"; -+ -+ init = <0x10000e7 0x0010 -+ 0x1000000 0x0001 -+ 0x1000001 0x0100 -+ 0x1000002 0x0700 -+ 0x1000003 0x1030 -+ 0x1000004 0x0000 -+ 0x1000008 0x0207 -+ 0x1000009 0x0000 -+ 0x100000a 0x0000 -+ 0x100000c 0x0001 -+ 0x100000d 0x0000 -+ 0x100000f 0x0000 -+ 0x1000010 0x0000 -+ 0x1000011 0x0007 -+ 0x1000012 0x0000 -+ 0x1000013 0x0000 -+ 0x2000032 -+ 0x1000010 0x1590 -+ 0x1000011 0x0227 -+ 0x2000032 -+ 0x1000012 0x009c -+ 0x2000032 -+ 0x1000013 0x1900 -+ 0x1000029 0x0023 -+ 0x100002b 0x000e -+ 0x2000032 -+ 0x1000020 0x0000 -+ 0x1000021 0x0000 -+ 0x2000032 -+ 0x1000050 0x0000 -+ 0x1000051 0x00ef -+ 0x1000052 0x0000 -+ 0x1000053 0x013f -+ 0x1000060 0xa700 -+ 0x1000061 0x0001 -+ 0x100006a 0x0000 -+ 0x1000080 0x0000 -+ 0x1000081 0x0000 -+ 0x1000082 0x0000 -+ 0x1000083 0x0000 -+ 0x1000084 0x0000 -+ 0x1000085 0x0000 -+ 0x1000090 0x0010 -+ 0x1000092 0x0000 -+ 0x1000093 0x0003 -+ 0x1000095 0x0110 -+ 0x1000097 0x0000 -+ 0x1000098 0x0000 -+ 0x1000007 0x0133 -+ 0x1000020 0x0000 -+ 0x1000021 0x0000 -+ 0x2000064>; -+ debug = <0>; -+ }; -+ -+ hy28b_ts: hy28b-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <17 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 17 0>; -+ ti,x-plate-ohms = /bits/ 16 <100>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&hy28b>,"spi-max-frequency:0"; -+ rotate = <&hy28b>,"rotate:0"; -+ fps = <&hy28b>,"fps:0"; -+ debug = <&hy28b>,"debug:0"; -+ xohms = <&hy28b_ts>,"ti,x-plate-ohms;0"; -+ resetgpio = <&hy28b>,"reset-gpios:4", -+ <&hy28b_pins>, "brcm,pins:4"; -+ ledgpio = <&hy28b>,"led-gpios:4", -+ <&hy28b_pins>, "brcm,pins:8"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts b/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts -new file mode 100644 -index 000000000000..0c4cff354674 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for I-Sabre Q2M -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&sound>; -+ frag0: __overlay__ { -+ compatible = "audiophonics,i-sabre-q2m"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ i-sabre-codec@48 { -+ #sound-dai-cells = <0>; -+ compatible = "audiophonics,i-sabre-codec"; -+ reg = <0x48>; -+ status = "okay"; -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts b/arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts -new file mode 100644 -index 000000000000..8204b6b3aef8 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts -@@ -0,0 +1,13 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ compatible = "brcm,bcm2708-i2c"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts b/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts -new file mode 100644 -index 000000000000..39e7bc5fa9d8 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts -@@ -0,0 +1,45 @@ -+// Overlay for i2c_gpio bitbanging host bus. -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ -+ __overlay__ { -+ i2c_gpio: i2c@0 { -+ reg = <0xffffffff>; -+ compatible = "i2c-gpio"; -+ gpios = <&gpio 23 0 /* sda */ -+ &gpio 24 0 /* scl */ -+ >; -+ i2c-gpio,delay-us = <2>; /* ~100 kHz */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/aliases"; -+ __overlay__ { -+ i2c_gpio = "/i2c@0"; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/__symbols__"; -+ __overlay__ { -+ i2c_gpio = "/i2c@0"; -+ }; -+ }; -+ -+ __overrides__ { -+ i2c_gpio_sda = <&i2c_gpio>,"gpios:4"; -+ i2c_gpio_scl = <&i2c_gpio>,"gpios:16"; -+ i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0"; -+ bus = <&i2c_gpio>, "reg:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c-mux-overlay.dts b/arch/arm/boot/dts/overlays/i2c-mux-overlay.dts -new file mode 100644 -index 000000000000..112aed91ecb2 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-mux-overlay.dts -@@ -0,0 +1,139 @@ -+// Umbrella I2C Mux overlay -+ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pca9542: mux@70 { -+ compatible = "nxp,pca9542"; -+ reg = <0x70>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ }; -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pca9545: mux@70 { -+ compatible = "nxp,pca9545"; -+ reg = <0x70>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ }; -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ }; -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ }; -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pca9548: mux@70 { -+ compatible = "nxp,pca9548"; -+ reg = <0x70>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ }; -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ }; -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ }; -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ }; -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ }; -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ }; -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ }; -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ }; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ pca9542 = <0>, "+0"; -+ pca9545 = <0>, "+1"; -+ pca9548 = <0>, "+2"; -+ -+ addr = <&pca9542>,"reg:0", -+ <&pca9545>,"reg:0", -+ <&pca9548>,"reg:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts b/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts -new file mode 100644 -index 000000000000..108165df165e ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts -@@ -0,0 +1,26 @@ -+// Definitions for NXP PCA9685A I2C PWM controller on ARM I2C bus. -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pca: pca@40 { -+ compatible = "nxp,pca9685"; -+ #pwm-cells = <2>; -+ reg = <0x40>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ __overrides__ { -+ addr = <&pca>,"reg:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts -new file mode 100644 -index 000000000000..44df77459520 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts -@@ -0,0 +1,244 @@ -+// Definitions for several I2C based Real Time Clocks -+// Available through i2c-gpio -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ i2c_gpio: i2c-gpio-rtc@0 { -+ compatible = "i2c-gpio"; -+ gpios = <&gpio 23 0 /* sda */ -+ &gpio 24 0 /* scl */ -+ >; -+ i2c-gpio,delay-us = <2>; /* ~100 kHz */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ abx80x: abx80x@69 { -+ compatible = "abracon,abx80x"; -+ reg = <0x69>; -+ abracon,tc-diode = "standard"; -+ abracon,tc-resistor = <0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ds1307: ds1307@68 { -+ compatible = "dallas,ds1307"; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ds1339: ds1339@68 { -+ compatible = "dallas,ds1339"; -+ trickle-resistor-ohms = <0>; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ds3231: ds3231@68 { -+ compatible = "maxim,ds3231"; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ mcp7940x: mcp7940x@6f { -+ compatible = "microchip,mcp7940x"; -+ reg = <0x6f>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ mcp7941x: mcp7941x@6f { -+ compatible = "microchip,mcp7941x"; -+ reg = <0x6f>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@7 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcf2127@51 { -+ compatible = "nxp,pcf2127"; -+ reg = <0x51>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcf8523: pcf8523@68 { -+ compatible = "nxp,pcf8523"; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@9 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcf8563: pcf8563@51 { -+ compatible = "nxp,pcf8563"; -+ reg = <0x51>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@10 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ m41t62: m41t62@68 { -+ compatible = "st,m41t62"; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@11 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ rv3028: rv3028@52 { -+ compatible = "microcrystal,rv3028"; -+ reg = <0x52>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@12 { -+ target = <&i2c_gpio>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcf2129@51 { -+ compatible = "nxp,pcf2129"; -+ reg = <0x51>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ abx80x = <0>,"+1"; -+ ds1307 = <0>,"+2"; -+ ds1339 = <0>,"+3"; -+ ds3231 = <0>,"+4"; -+ mcp7940x = <0>,"+5"; -+ mcp7941x = <0>,"+6"; -+ pcf2127 = <0>,"+7"; -+ pcf8523 = <0>,"+8"; -+ pcf8563 = <0>,"+9"; -+ m41t62 = <0>,"+10"; -+ rv3028 = <0>,"+11"; -+ pcf2129 = <0>,"+12"; -+ -+ addr = <&abx80x>, "reg:0", -+ <&ds1307>, "reg:0", -+ <&ds1339>, "reg:0", -+ <&ds3231>, "reg:0", -+ <&mcp7940x>, "reg:0", -+ <&mcp7941x>, "reg:0", -+ <&pcf8523>, "reg:0", -+ <&pcf8563>, "reg:0", -+ <&m41t62>, "reg:0"; -+ -+ trickle-diode-type = <&abx80x>,"abracon,tc-diode"; -+ trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", -+ <&abx80x>,"abracon,tc-resistor", -+ <&rv3028>,"trickle-resistor-ohms:0"; -+ backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0"; -+ wakeup-source = <&ds1339>,"wakeup-source?", -+ <&ds3231>,"wakeup-source?", -+ <&mcp7940x>,"wakeup-source?", -+ <&mcp7941x>,"wakeup-source?"; -+ i2c_gpio_sda = <&i2c_gpio>,"gpios:4"; -+ i2c_gpio_scl = <&i2c_gpio>,"gpios:16"; -+ i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -new file mode 100644 -index 000000000000..af5ca042de75 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts -@@ -0,0 +1,225 @@ -+// Definitions for several I2C based Real Time Clocks -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ abx80x: abx80x@69 { -+ compatible = "abracon,abx80x"; -+ reg = <0x69>; -+ abracon,tc-diode = "standard"; -+ abracon,tc-resistor = <0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ds1307: ds1307@68 { -+ compatible = "dallas,ds1307"; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ds1339: ds1339@68 { -+ compatible = "dallas,ds1339"; -+ trickle-resistor-ohms = <0>; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ds3231: ds3231@68 { -+ compatible = "maxim,ds3231"; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ mcp7940x: mcp7940x@6f { -+ compatible = "microchip,mcp7940x"; -+ reg = <0x6f>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ mcp7941x: mcp7941x@6f { -+ compatible = "microchip,mcp7941x"; -+ reg = <0x6f>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcf2127@51 { -+ compatible = "nxp,pcf2127"; -+ reg = <0x51>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@7 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcf8523: pcf8523@68 { -+ compatible = "nxp,pcf8523"; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcf8563: pcf8563@51 { -+ compatible = "nxp,pcf8563"; -+ reg = <0x51>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@9 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ m41t62: m41t62@68 { -+ compatible = "st,m41t62"; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@10 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ rv3028: rv3028@52 { -+ compatible = "microcrystal,rv3028"; -+ reg = <0x52>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@11 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcf2129@51 { -+ compatible = "nxp,pcf2129"; -+ reg = <0x51>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ abx80x = <0>,"+0"; -+ ds1307 = <0>,"+1"; -+ ds1339 = <0>,"+2"; -+ ds3231 = <0>,"+3"; -+ mcp7940x = <0>,"+4"; -+ mcp7941x = <0>,"+5"; -+ pcf2127 = <0>,"+6"; -+ pcf8523 = <0>,"+7"; -+ pcf8563 = <0>,"+8"; -+ m41t62 = <0>,"+9"; -+ rv3028 = <0>,"+10"; -+ pcf2129 = <0>,"+11"; -+ -+ addr = <&abx80x>, "reg:0", -+ <&ds1307>, "reg:0", -+ <&ds1339>, "reg:0", -+ <&ds3231>, "reg:0", -+ <&mcp7940x>, "reg:0", -+ <&mcp7941x>, "reg:0", -+ <&pcf8523>, "reg:0", -+ <&pcf8563>, "reg:0", -+ <&m41t62>, "reg:0"; -+ trickle-diode-type = <&abx80x>,"abracon,tc-diode"; -+ trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", -+ <&abx80x>,"abracon,tc-resistor", -+ <&rv3028>,"trickle-resistor-ohms:0"; -+ backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0"; -+ wakeup-source = <&ds1339>,"wakeup-source?", -+ <&ds3231>,"wakeup-source?", -+ <&mcp7940x>,"wakeup-source?", -+ <&mcp7941x>,"wakeup-source?", -+ <&m41t62>,"wakeup-source?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -new file mode 100644 -index 000000000000..777e4a68190a ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -@@ -0,0 +1,239 @@ -+// Definitions for I2C based sensors using the Industrial IO or HWMON interface. -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ bme280: bme280@76 { -+ compatible = "bosch,bme280"; -+ reg = <0x76>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ bmp085: bmp085@77 { -+ compatible = "bosch,bmp085"; -+ reg = <0x77>; -+ default-oversampling = <3>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ bmp180: bmp180@77 { -+ compatible = "bosch,bmp180"; -+ reg = <0x77>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ bmp280: bmp280@76 { -+ compatible = "bosch,bmp280"; -+ reg = <0x76>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ htu21: htu21@40 { -+ compatible = "htu21"; -+ reg = <0x40>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ lm75: lm75@4f { -+ compatible = "lm75"; -+ reg = <0x4f>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ si7020: si7020@40 { -+ compatible = "si7020"; -+ reg = <0x40>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@7 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ tmp102: tmp102@48 { -+ compatible = "ti,tmp102"; -+ reg = <0x48>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ hdc100x: hdc100x@40 { -+ compatible = "hdc100x"; -+ reg = <0x40>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@9 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ tsl4531: tsl4531@29 { -+ compatible = "tsl4531"; -+ reg = <0x29>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@10 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ veml6070: veml6070@38 { -+ compatible = "veml6070"; -+ reg = <0x38>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@11 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ sht3x: sht3x@44 { -+ compatible = "sht3x"; -+ reg = <0x44>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@12 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ds1621: ds1621@48 { -+ compatible = "ds1621"; -+ reg = <0x48>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@13 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ max17040: max17040@36 { -+ compatible = "maxim,max17040"; -+ reg = <0x36>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ addr = <&bme280>,"reg:0", <&bmp280>,"reg:0", <&tmp102>,"reg:0", -+ <&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0", -+ <&ds1621>,"reg:0"; -+ bme280 = <0>,"+0"; -+ bmp085 = <0>,"+1"; -+ bmp180 = <0>,"+2"; -+ bmp280 = <0>,"+3"; -+ htu21 = <0>,"+4"; -+ lm75 = <0>,"+5"; -+ lm75addr = <&lm75>,"reg:0"; -+ si7020 = <0>,"+6"; -+ tmp102 = <0>,"+7"; -+ hdc100x = <0>,"+8"; -+ tsl4531 = <0>,"+9"; -+ veml6070 = <0>,"+10"; -+ sht3x = <0>,"+11"; -+ ds1621 = <0>,"+12"; -+ max17040 = <0>,"+13"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts b/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts -new file mode 100644 -index 000000000000..02f7dca9b71e ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c0-bcm2708-overlay.dts -@@ -0,0 +1,14 @@ -+#include "i2c0-overlay.dts" -+ -+/{ -+ __overrides__ { -+ sda0_pin = <&pins1>,"brcm,pins:0", -+ <&pins2>,"brcm,pins:0", -+ <&pins3>,"brcm,pins:0", -+ <&pins4>,"brcm,pins:0"; -+ scl0_pin = <&pins1>,"brcm,pins:4", -+ <&pins2>,"brcm,pins:4", -+ <&pins3>,"brcm,pins:4", -+ <&pins4>,"brcm,pins:4"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c0-overlay.dts b/arch/arm/boot/dts/overlays/i2c0-overlay.dts -new file mode 100644 -index 000000000000..6b1f9ec6c878 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c0-overlay.dts -@@ -0,0 +1,61 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c0>; -+ __overlay__ { -+ status = "okay"; -+ pinctrl-0 = <&i2c0_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c0_pins>; -+ pins1: __overlay__ { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c0_pins>; -+ pins2: __dormant__ { -+ brcm,pins = <28 29>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c0_pins>; -+ pins3: __dormant__ { -+ brcm,pins = <44 45>; -+ brcm,function = <5>; /* alt1 */ -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&i2c0_pins>; -+ pins4: __dormant__ { -+ brcm,pins = <46 47>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&i2c0>; -+ __dormant__ { -+ compatible = "brcm,bcm2708-i2c"; -+ }; -+ }; -+ -+ __overrides__ { -+ pins_0_1 = <0>,"+1-2-3-4"; -+ pins_28_29 = <0>,"-1+2-3-4"; -+ pins_44_45 = <0>,"-1-2+3-4"; -+ pins_46_47 = <0>,"-1-2-3+4"; -+ combine = <0>, "!5"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts b/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts -new file mode 100644 -index 000000000000..09d8b16a6256 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c1-bcm2708-overlay.dts -@@ -0,0 +1,9 @@ -+#include "i2c1-overlay.dts" -+ -+/{ -+ __overrides__ { -+ sda1_pin = <&pins1>,"brcm,pins:0", <&pins2>,"brcm,pins:0"; -+ scl1_pin = <&pins1>,"brcm,pins:4", <&pins1>,"brcm,pins:4"; -+ pin_func = <&pins1>,"brcm,function:0", <&pins2>,"brcm,function:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c1-overlay.dts b/arch/arm/boot/dts/overlays/i2c1-overlay.dts -new file mode 100644 -index 000000000000..addaed73e665 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c1-overlay.dts -@@ -0,0 +1,44 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ __overlay__ { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1_pins>; -+ pins1: __overlay__ { -+ brcm,pins = <2 3>; -+ brcm,function = <4>; /* alt 0 */ -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1_pins>; -+ pins2: __dormant__ { -+ brcm,pins = <44 45>; -+ brcm,function = <6>; /* alt 2 */ -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c1>; -+ __dormant__ { -+ compatible = "brcm,bcm2708-i2c"; -+ }; -+ }; -+ -+ __overrides__ { -+ pins_2_3 = <0>,"=1!2"; -+ pins_44_45 = <0>,"!1=2"; -+ combine = <0>, "!3"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c3-overlay.dts b/arch/arm/boot/dts/overlays/i2c3-overlay.dts -new file mode 100644 -index 000000000000..e24a1df21f99 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c3-overlay.dts -@@ -0,0 +1,36 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&i2c3>; -+ frag0: __overlay__ { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c3_pins>; -+ clock-frequency = <100000>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c3_pins>; -+ __dormant__ { -+ brcm,pins = <2 3>; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c3_pins>; -+ __overlay__ { -+ brcm,pins = <4 5>; -+ }; -+ }; -+ -+ __overrides__ { -+ pins_2_3 = <0>,"=1!2"; -+ pins_4_5 = <0>,"!1=2"; -+ baudrate = <&frag0>, "clock-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c4-overlay.dts b/arch/arm/boot/dts/overlays/i2c4-overlay.dts -new file mode 100644 -index 000000000000..14c7f4d1da4c ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c4-overlay.dts -@@ -0,0 +1,36 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&i2c4>; -+ frag0: __overlay__ { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c4_pins>; -+ clock-frequency = <100000>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c4_pins>; -+ __dormant__ { -+ brcm,pins = <6 7>; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c4_pins>; -+ __overlay__ { -+ brcm,pins = <8 9>; -+ }; -+ }; -+ -+ __overrides__ { -+ pins_6_7 = <0>,"=1!2"; -+ pins_8_9 = <0>,"!1=2"; -+ baudrate = <&frag0>, "clock-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c5-overlay.dts b/arch/arm/boot/dts/overlays/i2c5-overlay.dts -new file mode 100644 -index 000000000000..7953621112de ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c5-overlay.dts -@@ -0,0 +1,36 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&i2c5>; -+ frag0: __overlay__ { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c5_pins>; -+ clock-frequency = <100000>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c5_pins>; -+ __dormant__ { -+ brcm,pins = <10 11>; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c5_pins>; -+ __overlay__ { -+ brcm,pins = <12 13>; -+ }; -+ }; -+ -+ __overrides__ { -+ pins_10_11 = <0>,"=1!2"; -+ pins_12_13 = <0>,"!1=2"; -+ baudrate = <&frag0>, "clock-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2c6-overlay.dts b/arch/arm/boot/dts/overlays/i2c6-overlay.dts -new file mode 100644 -index 000000000000..555305a7ee1f ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2c6-overlay.dts -@@ -0,0 +1,36 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&i2c6>; -+ frag0: __overlay__ { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c6_pins>; -+ clock-frequency = <100000>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c6_pins>; -+ __dormant__ { -+ brcm,pins = <0 1>; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c6_pins>; -+ __overlay__ { -+ brcm,pins = <22 23>; -+ }; -+ }; -+ -+ __overrides__ { -+ pins_0_1 = <0>,"=1!2"; -+ pins_22_23 = <0>,"!1=2"; -+ baudrate = <&frag0>, "clock-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts b/arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts -new file mode 100644 -index 000000000000..cf43094c6ff4 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts -@@ -0,0 +1,18 @@ -+/* -+ * Device tree overlay to move i2s to gpio 28 to 31 on CM -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s_pins>; -+ __overlay__ { -+ brcm,pins = <28 29 30 31>; -+ brcm,function = <6>; /* alt2 */ -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/ilitek251x-overlay.dts b/arch/arm/boot/dts/overlays/ilitek251x-overlay.dts -new file mode 100644 -index 000000000000..551aba591d26 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ilitek251x-overlay.dts -@@ -0,0 +1,45 @@ -+// Device tree overlay for I2C connected Ilitek multiple touch controller -+/dts-v1/; -+/plugin/; -+ -+ / { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ ili251x_pins: ili251x_pins { -+ brcm,pins = <4>; // interrupt -+ brcm,function = <0>; // in -+ brcm,pull = <2>; // pull-up // -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ili251x: ili251x@41 { -+ compatible = "ilitek,ili251x"; -+ reg = <0x41>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ili251x_pins>; -+ interrupt-parent = <&gpio>; -+ interrupts = <4 8>; // high-to-low edge triggered -+ touchscreen-size-x = <16384>; -+ touchscreen-size-y = <9600>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ interrupt = <&ili251x_pins>,"brcm,pins:0", -+ <&ili251x>,"interrupts:0"; -+ sizex = <&ili251x>,"touchscreen-size-x:0"; -+ sizey = <&ili251x>,"touchscreen-size-y:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/imx219-overlay.dts b/arch/arm/boot/dts/overlays/imx219-overlay.dts -new file mode 100644 -index 000000000000..2a1500d07b68 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/imx219-overlay.dts -@@ -0,0 +1,129 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions for IMX219 camera module on VC I2C bus -+/dts-v1/; -+/plugin/; -+ -+#include <dt-bindings/gpio/gpio.h> -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ imx219: imx219@10 { -+ compatible = "sony,imx219"; -+ reg = <0x10>; -+ status = "okay"; -+ -+ clocks = <&imx219_clk>; -+ clock-names = "xclk"; -+ -+ VANA-supply = <&imx219_vana>; /* 2.8v */ -+ VDIG-supply = <&imx219_vdig>; /* 1.8v */ -+ VDDL-supply = <&imx219_vddl>; /* 1.2v */ -+ -+ imx219_clk: camera-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <24000000>; -+ }; -+ -+ port { -+ imx219_0: endpoint { -+ remote-endpoint = <&csi1_ep>; -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ clock-noncontinuous; -+ link-frequencies = -+ /bits/ 64 <297000000>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&csi1>; -+ __overlay__ { -+ status = "okay"; -+ -+ port { -+ csi1_ep: endpoint { -+ remote-endpoint = <&imx219_0>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <28 29>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@3 { -+ target = <&i2c0_pins>; -+ __overlay__ { -+ brcm,pins = <44 45>; -+ brcm,function = <5>; /* alt1 */ -+ }; -+ }; -+ fragment@4 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@5 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@6 { -+ target-path="/"; -+ __overlay__ { -+ imx219_vana: fixedregulator@0 { -+ compatible = "regulator-fixed"; -+ regulator-name = "imx219_vana"; -+ regulator-min-microvolt = <2800000>; -+ regulator-max-microvolt = <2800000>; -+ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ imx219_vdig: fixedregulator@1 { -+ compatible = "regulator-fixed"; -+ regulator-name = "imx219_vdig"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ }; -+ imx219_vddl: fixedregulator@2 { -+ compatible = "regulator-fixed"; -+ regulator-name = "imx219_vddl"; -+ regulator-min-microvolt = <1200000>; -+ regulator-max-microvolt = <1200000>; -+ }; -+ }; -+ }; -+ -+ fragment@7 { -+ target-path="/__overrides__"; -+ __overlay__ { -+ cam0-pwdn-ctrl = <&imx219_vana>,"gpio:0"; -+ cam0-pwdn = <&imx219_vana>,"gpio:4"; -+ }; -+ }; -+ -+ __overrides__ { -+ i2c_pins_0_1 = <0>,"-2-3+4"; -+ i2c_pins_28_29 = <0>,"+2-3-4"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts b/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts -new file mode 100644 -index 000000000000..ff3ef3942c6c ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts -@@ -0,0 +1,42 @@ -+// Definitions for IQaudIO CODEC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2708"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ da2713@1a { -+ #sound-dai-cells = <0>; -+ compatible = "dlg,da7213"; -+ reg = <0x1a>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ iqaudio_dac: __overlay__ { -+ compatible = "iqaudio,iqaudio-codec"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts -new file mode 100644 -index 000000000000..24073cadd0ef ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts -@@ -0,0 +1,46 @@ -+// Definitions for IQaudIO DAC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4c { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4c>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ frag2: __overlay__ { -+ compatible = "iqaudio,iqaudio-dac"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts -new file mode 100644 -index 000000000000..7c70b25e58d7 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts -@@ -0,0 +1,49 @@ -+// Definitions for IQaudIO DAC+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4c { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4c>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ iqaudio_dac: __overlay__ { -+ compatible = "iqaudio,iqaudio-dac"; -+ i2s-controller = <&i2s>; -+ mute-gpios = <&gpio 22 0>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = <&iqaudio_dac>,"iqaudio,24db_digital_gain?"; -+ auto_mute_amp = <&iqaudio_dac>,"iqaudio-dac,auto-mute-amp?"; -+ unmute_amp = <&iqaudio_dac>,"iqaudio-dac,unmute-amp?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts -new file mode 100644 -index 000000000000..ee54095c869b ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts -@@ -0,0 +1,47 @@ -+// Definitions for IQAudIO Digi WM8804 audio board -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8804@3b { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ status = "okay"; -+ DVDD-supply = <&vdd_3v3_reg>; -+ PVDD-supply = <&vdd_3v3_reg>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ wm8804_digi: __overlay__ { -+ compatible = "iqaudio,wm8804-digi"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ card_name = <&wm8804_digi>,"wm8804-digi,card-name"; -+ dai_name = <&wm8804_digi>,"wm8804-digi,dai-name"; -+ dai_stream_name = <&wm8804_digi>,"wm8804-digi,dai-stream-name"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/irs1125-overlay.dts b/arch/arm/boot/dts/overlays/irs1125-overlay.dts -new file mode 100644 -index 000000000000..b9006715a539 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/irs1125-overlay.dts -@@ -0,0 +1,97 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions for IRS1125 camera module on VC I2C bus -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ irs1125: irs1125@3D { -+ compatible = "infineon,irs1125"; -+ reg = <0x3D>; -+ status = "okay"; -+ -+ pwdn-gpios = <&gpio 5 0>; -+ clocks = <&irs1125_clk>; -+ -+ irs1125_clk: camera-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <26000000>; -+ }; -+ -+ port { -+ irs1125_0: endpoint { -+ remote-endpoint = <&csi1_ep>; -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ clock-noncontinuous; -+ link-frequencies = -+ /bits/ 64 <297000000>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&csi1>; -+ __overlay__ { -+ status = "okay"; -+ -+ port { -+ csi1_ep: endpoint { -+ remote-endpoint = <&irs1125_0>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <28 29>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@3 { -+ target = <&i2c0_pins>; -+ __overlay__ { -+ brcm,pins = <44 45>; -+ brcm,function = <5>; /* alt1 */ -+ }; -+ }; -+ fragment@4 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@5 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@6 { -+ target-path="/__overrides__"; -+ __overlay__ { -+ cam0-pwdn-ctrl = <&irs1125>,"pwdn-gpios:0"; -+ cam0-pwdn = <&irs1125>,"pwdn-gpios:4"; -+ }; -+ }; -+ -+ __overrides__ { -+ i2c_pins_0_1 = <0>,"-2-3+4"; -+ i2c_pins_28_29 = <0>,"+2-3-4"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts b/arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts -new file mode 100644 -index 000000000000..585c7dbcdf7f ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts -@@ -0,0 +1,309 @@ -+// Overlay for JEDEC SPI-NOR Flash Devices (aka m25p80) -+ -+// dtparams: -+// flash-spi<n>-<m> - Enables flash device on SPI<n>, CS#<m>. -+// flash-fastr-spi<n>-<m> - Enables flash device with fast read capability on SPI<n>, CS#<m>. -+// -+// If devices are present on SPI1 or SPI2, those interfaces must be enabled with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -+// -+// Example: A single flash device with fast read capability on SPI0, CS#0: -+// dtoverlay=jedec-spi-nor:flash-fastr-spi0-0 -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ // disable spi-dev on spi0.0 -+ fragment@0 { -+ target = <&spidev0>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi0.1 -+ fragment@1 { -+ target = <&spidev1>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi1.0 -+ fragment@2 { -+ target-path = "spi1/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi1.1 -+ fragment@3 { -+ target-path = "spi1/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi1.2 -+ fragment@4 { -+ target-path = "spi1/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi2.0 -+ fragment@5 { -+ target-path = "spi2/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi2.1 -+ fragment@6 { -+ target-path = "spi2/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi2.2 -+ fragment@7 { -+ target-path = "spi2/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // enable flash on spi0.0 -+ fragment@8 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi_nor_00: spi_nor@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ // enable flash on spi0.1 -+ fragment@9 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi_nor_01: spi_nor@1 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "jedec,spi-nor"; -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ // enable flash on spi1.0 -+ fragment@10 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi_nor_10: spi_nor@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ // enable flash on spi1.1 -+ fragment@11 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi_nor_11: spi_nor@1 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "jedec,spi-nor"; -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ // enable flash on spi1.2 -+ fragment@12 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi_nor_12: spi_nor@2 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "jedec,spi-nor"; -+ reg = <2>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ // enable flash on spi2.0 -+ fragment@13 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi_nor_20: spi_nor@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ // enable flash on spi2.1 -+ fragment@14 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi_nor_21: spi_nor@1 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "jedec,spi-nor"; -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ // enable flash on spi2.2 -+ fragment@15 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi_nor_22: spi_nor@2 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "jedec,spi-nor"; -+ reg = <2>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ // Enable fast read for device on spi0.0. -+ // Use default active low interrupt signalling. -+ fragment@16 { -+ target = <&spi_nor_00>; -+ __dormant__ { -+ m25p,fast-read; -+ }; -+ }; -+ -+ // Enable fast read for device on spi0.1. -+ // Use default active low interrupt signalling. -+ fragment@17 { -+ target = <&spi_nor_01>; -+ __dormant__ { -+ m25p,fast-read; -+ }; -+ }; -+ -+ // Enable fast read for device on spi1.0. -+ // Use default active low interrupt signalling. -+ fragment@18 { -+ target = <&spi_nor_10>; -+ __dormant__ { -+ m25p,fast-read; -+ }; -+ }; -+ -+ // Enable fast read for device on spi1.1. -+ // Use default active low interrupt signalling. -+ fragment@19 { -+ target = <&spi_nor_11>; -+ __dormant__ { -+ m25p,fast-read; -+ }; -+ }; -+ -+ // Enable fast read for device on spi1.2. -+ // Use default active low interrupt signalling. -+ fragment@20 { -+ target = <&spi_nor_12>; -+ __dormant__ { -+ m25p,fast-read; -+ }; -+ }; -+ -+ // Enable fast read for device on spi2.0. -+ // Use default active low interrupt signalling. -+ fragment@21 { -+ target = <&spi_nor_20>; -+ __dormant__ { -+ m25p,fast-read; -+ }; -+ }; -+ -+ // Enable fast read for device on spi2.1. -+ // Use default active low interrupt signalling. -+ fragment@22 { -+ target = <&spi_nor_21>; -+ __dormant__ { -+ m25p,fast-read; -+ }; -+ }; -+ -+ // Enable fast read for device on spi2.2. -+ // Use default active low interrupt signalling. -+ fragment@23 { -+ target = <&spi_nor_22>; -+ __dormant__ { -+ m25p,fast-read; -+ }; -+ }; -+ -+ __overrides__ { -+ flash-spi0-0 = <0>,"+0+8"; -+ flash-spi0-1 = <0>,"+1+9"; -+ flash-spi1-0 = <0>,"+2+10"; -+ flash-spi1-1 = <0>,"+3+11"; -+ flash-spi1-2 = <0>,"+4+12"; -+ flash-spi2-0 = <0>,"+5+13"; -+ flash-spi2-1 = <0>,"+6+14"; -+ flash-spi2-2 = <0>,"+7+15"; -+ flash-fastr-spi0-0 = <0>,"+0+8+16"; -+ flash-fastr-spi0-1 = <0>,"+1+9+17"; -+ flash-fastr-spi1-0 = <0>,"+2+10+18"; -+ flash-fastr-spi1-1 = <0>,"+3+11+19"; -+ flash-fastr-spi1-2 = <0>,"+4+12+20"; -+ flash-fastr-spi2-0 = <0>,"+5+13+21"; -+ flash-fastr-spi2-1 = <0>,"+6+14+22"; -+ flash-fastr-spi2-2 = <0>,"+7+15+23"; -+ }; -+}; -+ -diff --git a/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts -new file mode 100644 -index 000000000000..d00515dca419 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts -@@ -0,0 +1,46 @@ -+// Definitions for JustBoom DAC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm5122@4d { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5122"; -+ reg = <0x4d>; -+ AVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&vdd_3v3_reg>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ frag2: __overlay__ { -+ compatible = "justboom,justboom-dac"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ 24db_digital_gain = <&frag2>,"justboom,24db_digital_gain?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts -new file mode 100644 -index 000000000000..e73336029c54 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts -@@ -0,0 +1,41 @@ -+// Definitions for JustBoom Digi -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8804@3b { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ PVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "justboom,justboom-digi"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/ltc294x-overlay.dts b/arch/arm/boot/dts/overlays/ltc294x-overlay.dts -new file mode 100644 -index 000000000000..6d971f3649ca ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ltc294x-overlay.dts -@@ -0,0 +1,86 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ltc2941: ltc2941@64 { -+ compatible = "lltc,ltc2941"; -+ reg = <0x64>; -+ lltc,resistor-sense = <50>; -+ lltc,prescaler-exponent = <7>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ltc2942: ltc2942@64 { -+ compatible = "lltc,ltc2942"; -+ reg = <0x64>; -+ lltc,resistor-sense = <50>; -+ lltc,prescaler-exponent = <7>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ltc2943: ltc2943@64 { -+ compatible = "lltc,ltc2943"; -+ reg = <0x64>; -+ lltc,resistor-sense = <50>; -+ lltc,prescaler-exponent = <7>; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ltc2944: ltc2944@64 { -+ compatible = "lltc,ltc2944"; -+ reg = <0x64>; -+ lltc,resistor-sense = <50>; -+ lltc,prescaler-exponent = <7>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ ltc2941 = <0>,"+0"; -+ ltc2942 = <0>,"+1"; -+ ltc2943 = <0>,"+2"; -+ ltc2944 = <0>,"+3"; -+ resistor-sense = <<c2941>, "lltc,resistor-sense:0", -+ <<c2942>, "lltc,resistor-sense:0", -+ <<c2943>, "lltc,resistor-sense:0", -+ <<c2944>, "lltc,resistor-sense:0"; -+ prescaler-exponent = <<c2941>, "lltc,prescaler-exponent:0", -+ <<c2942>, "lltc,prescaler-exponent:0", -+ <<c2943>, "lltc,prescaler-exponent:0", -+ <<c2944>, "lltc,prescaler-exponent:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/max98357a-overlay.dts b/arch/arm/boot/dts/overlays/max98357a-overlay.dts -new file mode 100644 -index 000000000000..9e2afb05b7cb ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/max98357a-overlay.dts -@@ -0,0 +1,84 @@ -+// Overlay for Maxim MAX98357A audio DAC -+ -+// dtparams: -+// no-sdmode - SD_MODE pin not managed by driver. -+// sdmode-pin - Specify GPIO pin to which SD_MODE is connected (default 4). -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ /* Enable I2S */ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ /* DAC whose SD_MODE pin is managed by driver (via GPIO pin) */ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ max98357a_dac: max98357a { -+ compatible = "maxim,max98357a"; -+ #sound-dai-cells = <0>; -+ sdmode-gpios = <&gpio 4 0>; /* 2nd word overwritten by sdmode-pin parameter */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ /* DAC whose SD_MODE pin is not managed by driver */ -+ fragment@2 { -+ target-path = "/"; -+ __dormant__ { -+ max98357a_nsd: max98357a { -+ compatible = "maxim,max98357a"; -+ #sound-dai-cells = <0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ /* Soundcard connecting I2S to DAC with SD_MODE */ -+ fragment@3 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "simple-audio-card"; -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,name = "MAX98357A"; -+ status = "okay"; -+ simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ }; -+ simple-audio-card,codec { -+ sound-dai = <&max98357a_dac>; -+ }; -+ }; -+ }; -+ -+ /* Soundcard connecting I2S to DAC without SD_MODE */ -+ fragment@4 { -+ target = <&sound>; -+ __dormant__ { -+ compatible = "simple-audio-card"; -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,name = "MAX98357A"; -+ status = "okay"; -+ simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ }; -+ simple-audio-card,codec { -+ sound-dai = <&max98357a_nsd>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ no-sdmode = <0>,"-1+2-3+4"; -+ sdmode-pin = <&max98357a_dac>,"sdmode-gpios:4"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/mbed-dac-overlay.dts b/arch/arm/boot/dts/overlays/mbed-dac-overlay.dts -new file mode 100644 -index 000000000000..840dd9b31db4 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mbed-dac-overlay.dts -@@ -0,0 +1,64 @@ -+// Definitions for mbed DAC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ tlv320aic23: codec@1a { -+ #sound-dai-cells = <0>; -+ reg = <0x1a>; -+ compatible = "ti,tlv320aic23"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "simple-audio-card"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ -+ simple-audio-card,name = "mbed-DAC"; -+ -+ simple-audio-card,widgets = -+ "Microphone", "Mic Jack", -+ "Line", "Line In", -+ "Headphone", "Headphone Jack"; -+ -+ simple-audio-card,routing = -+ "Headphone Jack", "LHPOUT", -+ "Headphone Jack", "RHPOUT", -+ "LLINEIN", "Line In", -+ "RLINEIN", "Line In", -+ "MICIN", "Mic Jack"; -+ -+ simple-audio-card,format = "i2s"; -+ -+ simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ }; -+ -+ sound_master: simple-audio-card,codec { -+ sound-dai = <&tlv320aic23>; -+ system-clock-frequency = <12288000>; -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/mcp23017-overlay.dts b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -new file mode 100644 -index 000000000000..16af971c3bdb ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -@@ -0,0 +1,71 @@ -+// Definitions for MCP23017 Gpio Extender from Microchip Semiconductor -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ mcp23017_pins: mcp23017_pins@20 { -+ brcm,pins = <4>; -+ brcm,function = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp23017: mcp@20 { -+ compatible = "microchip,mcp23017"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&mcp23017>; -+ __dormant__ { -+ compatible = "microchip,mcp23008"; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&i2c1>; -+ __overlay__ { -+ mcp23017_irq: mcp@20 { -+ #interrupt-cells=<2>; -+ interrupt-parent = <&gpio>; -+ interrupts = <4 2>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpiopin = <&mcp23017_pins>,"brcm,pins:0", -+ <&mcp23017_irq>,"interrupts:0"; -+ addr = <&mcp23017>,"reg:0", <&mcp23017_pins>,"reg:0"; -+ mcp23008 = <0>,"=3"; -+ noints = <0>,"!1!4"; -+ }; -+}; -+ -diff --git a/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts b/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts -new file mode 100644 -index 000000000000..484d64b225fb ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp23s17-overlay.dts -@@ -0,0 +1,732 @@ -+// Overlay for MCP23S08/17 GPIO Extenders from Microchip Semiconductor -+ -+// dtparams: -+// s08-spi<n>-<m>-present - 4-bit integer, bitmap indicating MCP23S08 devices present on SPI<n>, CS#<m>. -+// s17-spi<n>-<m>-present - 8-bit integer, bitmap indicating MCP23S17 devices present on SPI<n>, CS#<m>. -+// s08-spi<n>-<m>-int-gpio - integer, enables interrupts on a single MCP23S08 device on SPI<n>, CS#<m>, specifies the GPIO pin to which INT output is connected. -+// s17-spi<n>-<m>-int-gpio - integer, enables mirrored interrupts on a single MCP23S17 device on SPI<n>, CS#<m>, specifies the GPIO pin to which either INTA or INTB output is connected. -+// -+// If devices are present on SPI1 or SPI2, those interfaces must be enabled with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -+// If interrupts are enabled for a device on a given CS# on a SPI bus, that device must be the only one present on that SPI bus/CS#. -+// -+// Example 1: A single MCP23S17 device on SPI0, CS#0 with its SPI addr set to 0 and INTA output connected to GPIO25: -+// dtoverlay=mcp23s17:s17-spi0-0-present=1,s17-spi0-0-int-gpio=25 -+// -+// Example 2: Two MCP23S08 devices on SPI1, CS#0 with their addrs set to 2 and 3. Three MCP23S17 devices on SPI1, CS#1 with their addrs set to 0, 1 and 7: -+// dtoverlay=spi1-2cs -+// dtoverlay=mcp23s17:s08-spi1-0-present=12,s17-spi1-1-present=131 -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ // disable spi-dev on spi0.0 -+ fragment@0 { -+ target = <&spidev0>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi0.1 -+ fragment@1 { -+ target = <&spidev1>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi1.0 -+ fragment@2 { -+ target-path = "spi1/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi1.1 -+ fragment@3 { -+ target-path = "spi1/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi1.2 -+ fragment@4 { -+ target-path = "spi1/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi2.0 -+ fragment@5 { -+ target-path = "spi2/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi2.1 -+ fragment@6 { -+ target-path = "spi2/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // disable spi-dev on spi2.2 -+ fragment@7 { -+ target-path = "spi2/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi0.0 -+ fragment@8 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_00: mcp23s08@0 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi0-0-present parameter */ -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi0-0-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi0.1 -+ fragment@9 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_01: mcp23s08@1 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi0-1-present parameter */ -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi0-1-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi1.0 -+ fragment@10 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_10: mcp23s08@0 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-0-present parameter */ -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-0-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi1.1 -+ fragment@11 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_11: mcp23s08@1 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-1-present parameter */ -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-1-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi1.2 -+ fragment@12 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_12: mcp23s08@2 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-2-present parameter */ -+ reg = <2>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-2-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi2.0 -+ fragment@13 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_20: mcp23s08@0 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-0-present parameter */ -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-0-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi2.1 -+ fragment@14 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_21: mcp23s08@1 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-1-present parameter */ -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-1-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s08s on spi2.2 -+ fragment@15 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s08_22: mcp23s08@2 { -+ compatible = "microchip,mcp23s08"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-2-present parameter */ -+ reg = <2>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-2-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi0.0 -+ fragment@16 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_00: mcp23s17@0 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi0-0-present parameter */ -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi0-0-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi0.1 -+ fragment@17 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_01: mcp23s17@1 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi0-1-present parameter */ -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi0-1-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi1.0 -+ fragment@18 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_10: mcp23s17@0 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-0-present parameter */ -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-0-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi1.1 -+ fragment@19 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_11: mcp23s17@1 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-1-present parameter */ -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-1-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi1.2 -+ fragment@20 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_12: mcp23s17@2 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-2-present parameter */ -+ reg = <2>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-2-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi2.0 -+ fragment@21 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_20: mcp23s17@0 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-0-present parameter */ -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-0-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi2.1 -+ fragment@22 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_21: mcp23s17@1 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-1-present parameter */ -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-1-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // enable one or more mcp23s17s on spi2.2 -+ fragment@23 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ mcp23s17_22: mcp23s17@2 { -+ compatible = "microchip,mcp23s17"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-2-present parameter */ -+ reg = <2>; -+ spi-max-frequency = <500000>; -+ status = "okay"; -+ #interrupt-cells=<2>; -+ interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-2-int-gpio parameter */ -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi0.0 as a input with no pull-up/down -+ fragment@24 { -+ target = <&gpio>; -+ __dormant__ { -+ spi0_0_int_pins: spi0_0_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi0-0-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi0.1 as a input with no pull-up/down -+ fragment@25 { -+ target = <&gpio>; -+ __dormant__ { -+ spi0_1_int_pins: spi0_1_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi0-1-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.0 as a input with no pull-up/down -+ fragment@26 { -+ target = <&gpio>; -+ __dormant__ { -+ spi1_0_int_pins: spi1_0_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-0-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.1 as a input with no pull-up/down -+ fragment@27 { -+ target = <&gpio>; -+ __dormant__ { -+ spi1_1_int_pins: spi1_1_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-1-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.2 as a input with no pull-up/down -+ fragment@28 { -+ target = <&gpio>; -+ __dormant__ { -+ spi1_2_int_pins: spi1_2_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-2-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.0 as a input with no pull-up/down -+ fragment@29 { -+ target = <&gpio>; -+ __dormant__ { -+ spi2_0_int_pins: spi2_0_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-0-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.1 as a input with no pull-up/down -+ fragment@30 { -+ target = <&gpio>; -+ __dormant__ { -+ spi2_1_int_pins: spi2_1_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-1-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.2 as a input with no pull-up/down -+ fragment@31 { -+ target = <&gpio>; -+ __dormant__ { -+ spi2_2_int_pins: spi2_2_int_pins { -+ brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-2-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi0.0. -+ // Use default active low interrupt signalling. -+ fragment@32 { -+ target = <&mcp23s08_00>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi0.1. -+ // Use default active low interrupt signalling. -+ fragment@33 { -+ target = <&mcp23s08_01>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi1.0. -+ // Use default active low interrupt signalling. -+ fragment@34 { -+ target = <&mcp23s08_10>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi1.1. -+ // Use default active low interrupt signalling. -+ fragment@35 { -+ target = <&mcp23s08_11>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi1.2. -+ // Use default active low interrupt signalling. -+ fragment@36 { -+ target = <&mcp23s08_12>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi2.0. -+ // Use default active low interrupt signalling. -+ fragment@37 { -+ target = <&mcp23s08_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi2.1. -+ // Use default active low interrupt signalling. -+ fragment@38 { -+ target = <&mcp23s08_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s08 on spi2.2. -+ // Use default active low interrupt signalling. -+ fragment@39 { -+ target = <&mcp23s08_22>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi0.0. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Use default active low interrupt signalling. -+ fragment@40 { -+ target = <&mcp23s17_00>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi0.1. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@41 { -+ target = <&mcp23s17_01>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi1.0. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@42 { -+ target = <&mcp23s17_10>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi1.1. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@43 { -+ target = <&mcp23s17_11>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi1.2. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@44 { -+ target = <&mcp23s17_12>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi2.0. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@45 { -+ target = <&mcp23s17_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi2.1. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@46 { -+ target = <&mcp23s17_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ // Enable interrupts for a mcp23s17 on spi2.2. -+ // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. -+ // Configure INTA/B outputs of mcp23s08/17 as active low. -+ fragment@47 { -+ target = <&mcp23s17_22>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ microchip,irq-mirror; -+ }; -+ }; -+ -+ __overrides__ { -+ s08-spi0-0-present = <0>,"+0+8", <&mcp23s08_00>,"microchip,spi-present-mask:0"; -+ s08-spi0-1-present = <0>,"+1+9", <&mcp23s08_01>,"microchip,spi-present-mask:0"; -+ s08-spi1-0-present = <0>,"+2+10", <&mcp23s08_10>,"microchip,spi-present-mask:0"; -+ s08-spi1-1-present = <0>,"+3+11", <&mcp23s08_11>,"microchip,spi-present-mask:0"; -+ s08-spi1-2-present = <0>,"+4+12", <&mcp23s08_12>,"microchip,spi-present-mask:0"; -+ s08-spi2-0-present = <0>,"+5+13", <&mcp23s08_20>,"microchip,spi-present-mask:0"; -+ s08-spi2-1-present = <0>,"+6+14", <&mcp23s08_21>,"microchip,spi-present-mask:0"; -+ s08-spi2-2-present = <0>,"+7+15", <&mcp23s08_22>,"microchip,spi-present-mask:0"; -+ s17-spi0-0-present = <0>,"+0+16", <&mcp23s17_00>,"microchip,spi-present-mask:0"; -+ s17-spi0-1-present = <0>,"+1+17", <&mcp23s17_01>,"microchip,spi-present-mask:0"; -+ s17-spi1-0-present = <0>,"+2+18", <&mcp23s17_10>,"microchip,spi-present-mask:0"; -+ s17-spi1-1-present = <0>,"+3+19", <&mcp23s17_11>,"microchip,spi-present-mask:0"; -+ s17-spi1-2-present = <0>,"+4+20", <&mcp23s17_12>,"microchip,spi-present-mask:0"; -+ s17-spi2-0-present = <0>,"+5+21", <&mcp23s17_20>,"microchip,spi-present-mask:0"; -+ s17-spi2-1-present = <0>,"+6+22", <&mcp23s17_21>,"microchip,spi-present-mask:0"; -+ s17-spi2-2-present = <0>,"+7+23", <&mcp23s17_22>,"microchip,spi-present-mask:0"; -+ s08-spi0-0-int-gpio = <0>,"+24+32", <&spi0_0_int_pins>,"brcm,pins:0", <&mcp23s08_00>,"interrupts:0"; -+ s08-spi0-1-int-gpio = <0>,"+25+33", <&spi0_1_int_pins>,"brcm,pins:0", <&mcp23s08_01>,"interrupts:0"; -+ s08-spi1-0-int-gpio = <0>,"+26+34", <&spi1_0_int_pins>,"brcm,pins:0", <&mcp23s08_10>,"interrupts:0"; -+ s08-spi1-1-int-gpio = <0>,"+27+35", <&spi1_1_int_pins>,"brcm,pins:0", <&mcp23s08_11>,"interrupts:0"; -+ s08-spi1-2-int-gpio = <0>,"+28+36", <&spi1_2_int_pins>,"brcm,pins:0", <&mcp23s08_12>,"interrupts:0"; -+ s08-spi2-0-int-gpio = <0>,"+29+37", <&spi2_0_int_pins>,"brcm,pins:0", <&mcp23s08_20>,"interrupts:0"; -+ s08-spi2-1-int-gpio = <0>,"+30+38", <&spi2_1_int_pins>,"brcm,pins:0", <&mcp23s08_21>,"interrupts:0"; -+ s08-spi2-2-int-gpio = <0>,"+31+39", <&spi2_2_int_pins>,"brcm,pins:0", <&mcp23s08_22>,"interrupts:0"; -+ s17-spi0-0-int-gpio = <0>,"+24+40", <&spi0_0_int_pins>,"brcm,pins:0", <&mcp23s17_00>,"interrupts:0"; -+ s17-spi0-1-int-gpio = <0>,"+25+41", <&spi0_1_int_pins>,"brcm,pins:0", <&mcp23s17_01>,"interrupts:0"; -+ s17-spi1-0-int-gpio = <0>,"+26+42", <&spi1_0_int_pins>,"brcm,pins:0", <&mcp23s17_10>,"interrupts:0"; -+ s17-spi1-1-int-gpio = <0>,"+27+43", <&spi1_1_int_pins>,"brcm,pins:0", <&mcp23s17_11>,"interrupts:0"; -+ s17-spi1-2-int-gpio = <0>,"+28+44", <&spi1_2_int_pins>,"brcm,pins:0", <&mcp23s17_12>,"interrupts:0"; -+ s17-spi2-0-int-gpio = <0>,"+29+45", <&spi2_0_int_pins>,"brcm,pins:0", <&mcp23s17_20>,"interrupts:0"; -+ s17-spi2-1-int-gpio = <0>,"+30+46", <&spi2_1_int_pins>,"brcm,pins:0", <&mcp23s17_21>,"interrupts:0"; -+ s17-spi2-2-int-gpio = <0>,"+31+47", <&spi2_2_int_pins>,"brcm,pins:0", <&mcp23s17_22>,"interrupts:0"; -+ }; -+}; -+ -diff --git a/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts b/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts -new file mode 100755 -index 000000000000..0dae8053a9a9 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts -@@ -0,0 +1,73 @@ -+/* -+ * Device tree overlay for mcp251x/can0 on spi0.0 -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ /* disable spi-dev for spi0.0 */ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ /* the interrupt pin of the can-controller */ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ can0_pins: can0_pins { -+ brcm,pins = <25>; -+ brcm,function = <0>; /* input */ -+ }; -+ }; -+ }; -+ -+ /* the clock/oscillator of the can-controller */ -+ fragment@3 { -+ target-path = "/clocks"; -+ __overlay__ { -+ /* external oscillator of mcp2515 on SPI0.0 */ -+ can0_osc: can0_osc { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <16000000>; -+ }; -+ }; -+ }; -+ -+ /* the spi config of the can-controller itself binding everything together */ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ can0: mcp2515@0 { -+ reg = <0>; -+ compatible = "microchip,mcp2515"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&can0_pins>; -+ spi-max-frequency = <10000000>; -+ interrupt-parent = <&gpio>; -+ interrupts = <25 8>; /* IRQ_TYPE_LEVEL_LOW */ -+ clocks = <&can0_osc>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ oscillator = <&can0_osc>,"clock-frequency:0"; -+ spimaxfrequency = <&can0>,"spi-max-frequency:0"; -+ interrupt = <&can0_pins>,"brcm,pins:0",<&can0>,"interrupts:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts b/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts -new file mode 100644 -index 000000000000..c70dc3d05ebf ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts -@@ -0,0 +1,73 @@ -+/* -+ * Device tree overlay for mcp251x/can1 on spi0.1 edited by petit_miner -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ /* disable spi-dev for spi0.1 */ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ /* the interrupt pin of the can-controller */ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ can1_pins: can1_pins { -+ brcm,pins = <25>; -+ brcm,function = <0>; /* input */ -+ }; -+ }; -+ }; -+ -+ /* the clock/oscillator of the can-controller */ -+ fragment@3 { -+ target-path = "/clocks"; -+ __overlay__ { -+ /* external oscillator of mcp2515 on spi0.1 */ -+ can1_osc: can1_osc { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <16000000>; -+ }; -+ }; -+ }; -+ -+ /* the spi config of the can-controller itself binding everything together */ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ can1: mcp2515@1 { -+ reg = <1>; -+ compatible = "microchip,mcp2515"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&can1_pins>; -+ spi-max-frequency = <10000000>; -+ interrupt-parent = <&gpio>; -+ interrupts = <25 8>; /* IRQ_TYPE_LEVEL_LOW */ -+ clocks = <&can1_osc>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ oscillator = <&can1_osc>,"clock-frequency:0"; -+ spimaxfrequency = <&can1>,"spi-max-frequency:0"; -+ interrupt = <&can1_pins>,"brcm,pins:0",<&can1>,"interrupts:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/mcp3008-overlay.dts b/arch/arm/boot/dts/overlays/mcp3008-overlay.dts -new file mode 100755 -index 000000000000..0b7d9f75546e ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp3008-overlay.dts -@@ -0,0 +1,205 @@ -+/* -+ * Device tree overlay for Microchip mcp3008 10-Bit A/D Converters -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spidev0>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev1>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "spi1/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "spi1/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "spi1/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@5 { -+ target-path = "spi2/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@6 { -+ target-path = "spi2/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@7 { -+ target-path = "spi2/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_00: mcp3008@0 { -+ compatible = "mcp3008"; -+ reg = <0>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@9 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_01: mcp3008@1 { -+ compatible = "mcp3008"; -+ reg = <1>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@10 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_10: mcp3008@0 { -+ compatible = "mcp3008"; -+ reg = <0>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@11 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_11: mcp3008@1 { -+ compatible = "mcp3008"; -+ reg = <1>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@12 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_12: mcp3008@2 { -+ compatible = "mcp3008"; -+ reg = <2>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@13 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_20: mcp3008@0 { -+ compatible = "mcp3008"; -+ reg = <0>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@14 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_21: mcp3008@1 { -+ compatible = "mcp3008"; -+ reg = <1>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@15 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3008_22: mcp3008@2 { -+ compatible = "mcp3008"; -+ reg = <2>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ spi0-0-present = <0>, "+0+8"; -+ spi0-1-present = <0>, "+1+9"; -+ spi1-0-present = <0>, "+2+10"; -+ spi1-1-present = <0>, "+3+11"; -+ spi1-2-present = <0>, "+4+12"; -+ spi2-0-present = <0>, "+5+13"; -+ spi2-1-present = <0>, "+6+14"; -+ spi2-2-present = <0>, "+7+15"; -+ spi0-0-speed = <&mcp3008_00>, "spi-max-frequency:0"; -+ spi0-1-speed = <&mcp3008_01>, "spi-max-frequency:0"; -+ spi1-0-speed = <&mcp3008_10>, "spi-max-frequency:0"; -+ spi1-1-speed = <&mcp3008_11>, "spi-max-frequency:0"; -+ spi1-2-speed = <&mcp3008_12>, "spi-max-frequency:0"; -+ spi2-0-speed = <&mcp3008_20>, "spi-max-frequency:0"; -+ spi2-1-speed = <&mcp3008_21>, "spi-max-frequency:0"; -+ spi2-2-speed = <&mcp3008_22>, "spi-max-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/mcp3202-overlay.dts b/arch/arm/boot/dts/overlays/mcp3202-overlay.dts -new file mode 100755 -index 000000000000..8e4e9f60f285 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp3202-overlay.dts -@@ -0,0 +1,205 @@ -+/* -+ * Device tree overlay for Microchip mcp3202 12-Bit A/D Converters -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spidev0>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev1>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "spi1/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "spi1/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "spi1/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@5 { -+ target-path = "spi2/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@6 { -+ target-path = "spi2/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@7 { -+ target-path = "spi2/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3202_00: mcp3202@0 { -+ compatible = "mcp3202"; -+ reg = <0>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@9 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3202_01: mcp3202@1 { -+ compatible = "mcp3202"; -+ reg = <1>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@10 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3202_10: mcp3202@0 { -+ compatible = "mcp3202"; -+ reg = <0>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@11 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3202_11: mcp3202@1 { -+ compatible = "mcp3202"; -+ reg = <1>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@12 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3202_12: mcp3202@2 { -+ compatible = "mcp3202"; -+ reg = <2>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@13 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3202_20: mcp3202@0 { -+ compatible = "mcp3202"; -+ reg = <0>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@14 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3202_21: mcp3202@1 { -+ compatible = "mcp3202"; -+ reg = <1>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ fragment@15 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mcp3202_22: mcp3202@2 { -+ compatible = "mcp3202"; -+ reg = <2>; -+ spi-max-frequency = <1600000>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ spi0-0-present = <0>, "+0+8"; -+ spi0-1-present = <0>, "+1+9"; -+ spi1-0-present = <0>, "+2+10"; -+ spi1-1-present = <0>, "+3+11"; -+ spi1-2-present = <0>, "+4+12"; -+ spi2-0-present = <0>, "+5+13"; -+ spi2-1-present = <0>, "+6+14"; -+ spi2-2-present = <0>, "+7+15"; -+ spi0-0-speed = <&mcp3202_00>, "spi-max-frequency:0"; -+ spi0-1-speed = <&mcp3202_01>, "spi-max-frequency:0"; -+ spi1-0-speed = <&mcp3202_10>, "spi-max-frequency:0"; -+ spi1-1-speed = <&mcp3202_11>, "spi-max-frequency:0"; -+ spi1-2-speed = <&mcp3202_12>, "spi-max-frequency:0"; -+ spi2-0-speed = <&mcp3202_20>, "spi-max-frequency:0"; -+ spi2-1-speed = <&mcp3202_21>, "spi-max-frequency:0"; -+ spi2-2-speed = <&mcp3202_22>, "spi-max-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/mcp342x-overlay.dts b/arch/arm/boot/dts/overlays/mcp342x-overlay.dts -new file mode 100644 -index 000000000000..7bbb528f804f ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mcp342x-overlay.dts -@@ -0,0 +1,93 @@ -+// Overlay for MCP3421-8 ADCs from Microchip Semiconductor -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ mcp342x: mcp@68 { -+ reg = <0x68>; -+ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3421"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3422"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3423"; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3424"; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3425"; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3426"; -+ }; -+ }; -+ -+ fragment@7 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3427"; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&mcp342x>; -+ __dormant__ { -+ compatible = "microchip,mcp3428"; -+ }; -+ }; -+ -+ __overrides__ { -+ addr = <&mcp342x>,"reg:0"; -+ mcp3421 = <0>,"=1"; -+ mcp3422 = <0>,"=2"; -+ mcp3423 = <0>,"=3"; -+ mcp3424 = <0>,"=4"; -+ mcp3425 = <0>,"=5"; -+ mcp3426 = <0>,"=6"; -+ mcp3427 = <0>,"=7"; -+ mcp3428 = <0>,"=8"; -+ }; -+}; -+ -diff --git a/arch/arm/boot/dts/overlays/media-center-overlay.dts b/arch/arm/boot/dts/overlays/media-center-overlay.dts -new file mode 100644 -index 000000000000..0fcdcfa18eb3 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/media-center-overlay.dts -@@ -0,0 +1,134 @@ -+/* -+ * Device Tree overlay for Media Center HAT by Pi Supply -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ -+ spidev@0{ -+ status = "disabled"; -+ }; -+ -+ spidev@1{ -+ status = "disabled"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ rpi_display_pins: rpi_display_pins { -+ brcm,pins = <12 23 24 25>; -+ brcm,function = <1 1 1 0>; /* out out out in */ -+ brcm,pull = <0 0 0 2>; /* - - - up */ -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rpidisplay: rpi-display@0{ -+ compatible = "ilitek,ili9341"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&rpi_display_pins>; -+ -+ spi-max-frequency = <32000000>; -+ rotate = <90>; -+ bgr; -+ fps = <30>; -+ buswidth = <8>; -+ reset-gpios = <&gpio 23 0>; -+ dc-gpios = <&gpio 24 0>; -+ led-gpios = <&gpio 12 1>; -+ debug = <0>; -+ }; -+ -+ rpidisplay_ts: rpi-display-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <25 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 25 0>; -+ ti,x-plate-ohms = /bits/ 16 <60>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "/"; -+ __overlay__ { -+ lirc_rpi: lirc_rpi { -+ compatible = "rpi,lirc-rpi"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&lirc_pins>; -+ status = "okay"; -+ -+ // Override autodetection of IR receiver circuit -+ // (0 = active high, 1 = active low, -1 = no override ) -+ rpi,sense = <0xffffffff>; -+ -+ // Software carrier -+ // (0 = off, 1 = on) -+ rpi,softcarrier = <1>; -+ -+ // Invert output -+ // (0 = off, 1 = on) -+ rpi,invert = <0>; -+ -+ // Enable debugging messages -+ // (0 = off, 1 = on) -+ rpi,debug = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&gpio>; -+ __overlay__ { -+ lirc_pins: lirc_pins { -+ brcm,pins = <6 5>; -+ brcm,function = <1 0>; // out in -+ brcm,pull = <0 1>; // off down -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&rpidisplay>,"spi-max-frequency:0"; -+ rotate = <&rpidisplay>,"rotate:0"; -+ fps = <&rpidisplay>,"fps:0"; -+ debug = <&rpidisplay>,"debug:0", -+ <&lirc_rpi>,"rpi,debug:0"; -+ xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0"; -+ swapxy = <&rpidisplay_ts>,"ti,swap-xy?"; -+ backlight = <&rpidisplay>,"led-gpios:4", -+ <&rpi_display_pins>,"brcm,pins:0"; -+ -+ gpio_out_pin = <&lirc_pins>,"brcm,pins:0"; -+ gpio_in_pin = <&lirc_pins>,"brcm,pins:4"; -+ gpio_in_pull = <&lirc_pins>,"brcm,pull:4"; -+ -+ sense = <&lirc_rpi>,"rpi,sense:0"; -+ softcarrier = <&lirc_rpi>,"rpi,softcarrier:0"; -+ invert = <&lirc_rpi>,"rpi,invert:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/midi-uart0-overlay.dts b/arch/arm/boot/dts/overlays/midi-uart0-overlay.dts -new file mode 100644 -index 000000000000..565af7cf79d7 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/midi-uart0-overlay.dts -@@ -0,0 +1,36 @@ -+/dts-v1/; -+/plugin/; -+ -+#include <dt-bindings/clock/bcm2835.h> -+ -+/* -+ * Fake a higher clock rate to get a larger divisor, and thereby a lower -+ * baudrate. The real clock is 48MHz, which we scale so that requesting -+ * 38.4kHz results in an actual 31.25kHz. -+ * -+ * 48000000*38400/31250 = 58982400 -+ */ -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/clocks"; -+ __overlay__ { -+ midi_clk: midi_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-output-names = "uart0_pclk"; -+ clock-frequency = <58982400>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart0>; -+ __overlay__ { -+ clocks = <&midi_clk>, -+ <&clocks BCM2835_CLOCK_VPU>; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/midi-uart1-overlay.dts b/arch/arm/boot/dts/overlays/midi-uart1-overlay.dts -new file mode 100644 -index 000000000000..e0bc410acbff ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/midi-uart1-overlay.dts -@@ -0,0 +1,43 @@ -+/dts-v1/; -+/plugin/; -+ -+#include <dt-bindings/clock/bcm2835-aux.h> -+ -+/* -+ * Fake a higher clock rate to get a larger divisor, and thereby a lower -+ * baudrate. The real clock is 48MHz, which we scale so that requesting -+ * 38.4kHz results in an actual 31.25kHz. -+ * -+ * 48000000*38400/31250 = 58982400 -+ */ -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/clocks"; -+ __overlay__ { -+ midi_clk: clock@5 { -+ compatible = "fixed-factor-clock"; -+ #clock-cells = <0>; -+ clocks = <&aux BCM2835_AUX_CLOCK_UART>; -+ clock-mult = <38400>; -+ clock-div = <31250>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart1>; -+ __overlay__ { -+ clocks = <&midi_clk>; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ clock-output-names = "aux_uart", "aux_spi1", "aux_spi2"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts b/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts -new file mode 100644 -index 000000000000..30d3d8549da0 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts -@@ -0,0 +1,74 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore -+ UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum -+ usable baudrate. -+ -+ It is also necessary to edit /lib/systemd/system/hciuart.service and -+ replace ttyAMA0 with ttyS0, unless you have a system with udev rules -+ that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1 -+ instead because it will always be correct. -+ -+ If cmdline.txt uses the alias serial0 to refer to the user-accessable port -+ then the firmware will replace with the appropriate port whether or not -+ this overlay is used. -+*/ -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&uart0>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart1>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins &bt_pins &fake_bt_cts>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&uart0_pins>; -+ __overlay__ { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&uart1_pins>; -+ __overlay__ { -+ brcm,pins = <32 33>; -+ brcm,function = <2>; /* alt5=UART1 */ -+ brcm,pull = <0 2>; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&gpio>; -+ __overlay__ { -+ fake_bt_cts: fake_bt_cts { -+ brcm,pins = <31>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@5 { -+ target-path = "/aliases"; -+ __overlay__ { -+ serial0 = "/soc/serial@7e201000"; -+ serial1 = "/soc/serial@7e215040"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/mmc-overlay.dts b/arch/arm/boot/dts/overlays/mmc-overlay.dts -new file mode 100644 -index 000000000000..c1a2f691aa1e ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mmc-overlay.dts -@@ -0,0 +1,46 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&mmc>; -+ frag0: __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc_pins>; -+ bus-width = <4>; -+ brcm,overclock-50 = <0>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ mmc_pins: mmc_pins { -+ brcm,pins = <48 49 50 51 52 53>; -+ brcm,function = <7>; /* alt3 */ -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sdhost>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&mmcnr>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ __overrides__ { -+ overclock_50 = <&frag0>,"brcm,overclock-50:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/mpu6050-overlay.dts b/arch/arm/boot/dts/overlays/mpu6050-overlay.dts -new file mode 100644 -index 000000000000..3109d90562ae ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mpu6050-overlay.dts -@@ -0,0 +1,28 @@ -+// Definitions for MPU6050 -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ clock-frequency = <400000>; -+ -+ mpu6050: mpu6050@68 { -+ compatible = "invensense,mpu6050"; -+ reg = <0x68>; -+ interrupt-parent = <&gpio>; -+ interrupts = <4 1>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ interrupt = <&mpu6050>,"interrupts:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/mz61581-overlay.dts b/arch/arm/boot/dts/overlays/mz61581-overlay.dts -new file mode 100644 -index 000000000000..32686968c0d6 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/mz61581-overlay.dts -@@ -0,0 +1,117 @@ -+/* -+ * Device Tree overlay for MZ61581-PI-EXT 2014.12.28 by Tontec -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ mz61581_pins: mz61581_pins { -+ brcm,pins = <4 15 18 25>; -+ brcm,function = <0 1 1 1>; /* in out out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ mz61581: mz61581@0{ -+ compatible = "samsung,s6d02a1"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mz61581_pins>; -+ -+ spi-max-frequency = <128000000>; -+ spi-cpol; -+ spi-cpha; -+ -+ width = <320>; -+ height = <480>; -+ rotate = <270>; -+ bgr; -+ fps = <30>; -+ buswidth = <8>; -+ txbuflen = <32768>; -+ -+ reset-gpios = <&gpio 15 0>; -+ dc-gpios = <&gpio 25 0>; -+ led-gpios = <&gpio 18 0>; -+ -+ init = <0x10000b0 00 -+ 0x1000011 -+ 0x20000ff -+ 0x10000b3 0x02 0x00 0x00 0x00 -+ 0x10000c0 0x13 0x3b 0x00 0x02 0x00 0x01 0x00 0x43 -+ 0x10000c1 0x08 0x16 0x08 0x08 -+ 0x10000c4 0x11 0x07 0x03 0x03 -+ 0x10000c6 0x00 -+ 0x10000c8 0x03 0x03 0x13 0x5c 0x03 0x07 0x14 0x08 0x00 0x21 0x08 0x14 0x07 0x53 0x0c 0x13 0x03 0x03 0x21 0x00 -+ 0x1000035 0x00 -+ 0x1000036 0xa0 -+ 0x100003a 0x55 -+ 0x1000044 0x00 0x01 -+ 0x10000d0 0x07 0x07 0x1d 0x03 -+ 0x10000d1 0x03 0x30 0x10 -+ 0x10000d2 0x03 0x14 0x04 -+ 0x1000029 -+ 0x100002c>; -+ -+ /* This is a workaround to make sure the init sequence slows down and doesn't fail */ -+ debug = <3>; -+ }; -+ -+ mz61581_ts: mz61581_ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <4 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 4 0>; -+ -+ ti,x-plate-ohms = /bits/ 16 <60>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&mz61581>, "spi-max-frequency:0"; -+ rotate = <&mz61581>, "rotate:0"; -+ fps = <&mz61581>, "fps:0"; -+ txbuflen = <&mz61581>, "txbuflen:0"; -+ debug = <&mz61581>, "debug:0"; -+ xohms = <&mz61581_ts>,"ti,x-plate-ohms;0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/ov5647-overlay.dts b/arch/arm/boot/dts/overlays/ov5647-overlay.dts -new file mode 100644 -index 000000000000..5266d4b8758d ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts -@@ -0,0 +1,99 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions for OV5647 camera module on VC I2C bus -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ ov5647: ov5647@36 { -+ compatible = "ovti,ov5647"; -+ reg = <0x36>; -+ status = "okay"; -+ -+ pwdn-gpios = <&gpio 41 1>, <&gpio 32 1>; -+ clocks = <&ov5647_clk>; -+ -+ ov5647_clk: camera-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <25000000>; -+ }; -+ -+ port { -+ ov5647_0: endpoint { -+ remote-endpoint = <&csi1_ep>; -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ clock-noncontinuous; -+ link-frequencies = -+ /bits/ 64 <297000000>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&csi1>; -+ __overlay__ { -+ status = "okay"; -+ -+ port { -+ csi1_ep: endpoint { -+ remote-endpoint = <&ov5647_0>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <28 29>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@3 { -+ target = <&i2c0_pins>; -+ __overlay__ { -+ brcm,pins = <44 45>; -+ brcm,function = <5>; /* alt1 */ -+ }; -+ }; -+ fragment@4 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@5 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@6 { -+ target-path="/__overrides__"; -+ __overlay__ { -+ cam0-pwdn-ctrl = <&ov5647>,"pwdn-gpios:0"; -+ cam0-pwdn = <&ov5647>,"pwdn-gpios:4"; -+ cam0-led-ctrl = <&ov5647>,"pwdn-gpios:12"; -+ cam0-led = <&ov5647>,"pwdn-gpios:16"; -+ }; -+ }; -+ -+ __overrides__ { -+ i2c_pins_0_1 = <0>,"-2-3+4"; -+ i2c_pins_28_29 = <0>,"+2-3-4"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/papirus-overlay.dts b/arch/arm/boot/dts/overlays/papirus-overlay.dts -new file mode 100644 -index 000000000000..7b6bcfd49c86 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/papirus-overlay.dts -@@ -0,0 +1,89 @@ -+/* PaPiRus ePaper Screen by Pi Supply */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ display_temp: lm75@48 { -+ compatible = "lm75b"; -+ reg = <0x48>; -+ status = "okay"; -+ #thermal-sensor-cells = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ thermal-zones { -+ display { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&display_temp>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ -+ spidev@0{ -+ status = "disabled"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ repaper_pins: repaper_pins { -+ brcm,pins = <14 15 23 24 25>; -+ brcm,function = <1 1 1 1 0>; /* out out out out in */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ repaper: repaper@0{ -+ compatible = "not_set"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&repaper_pins>; -+ -+ spi-max-frequency = <8000000>; -+ -+ panel-on-gpios = <&gpio 23 0>; -+ border-gpios = <&gpio 14 0>; -+ discharge-gpios = <&gpio 15 0>; -+ reset-gpios = <&gpio 24 0>; -+ busy-gpios = <&gpio 25 0>; -+ -+ repaper-thermal-zone = "display"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ panel = <&repaper>, "compatible"; -+ speed = <&repaper>, "spi-max-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts b/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts -new file mode 100644 -index 000000000000..aedfc90e8a31 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts -@@ -0,0 +1 @@ -+#include "act-led-overlay.dts" -diff --git a/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts -new file mode 100644 -index 000000000000..e09a49295236 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts -@@ -0,0 +1 @@ -+#include "disable-bt-overlay.dts" -diff --git a/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts -new file mode 100644 -index 000000000000..b61b69c14f37 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts -@@ -0,0 +1 @@ -+#include "disable-wifi-overlay.dts" -diff --git a/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts -new file mode 100644 -index 000000000000..94c14267716e ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts -@@ -0,0 +1 @@ -+#include "miniuart-bt-overlay.dts" -diff --git a/arch/arm/boot/dts/overlays/pibell-overlay.dts b/arch/arm/boot/dts/overlays/pibell-overlay.dts -new file mode 100644 -index 000000000000..9333a9b09772 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pibell-overlay.dts -@@ -0,0 +1,81 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ codec_out: spdif-transmitter { -+ #address-cells = <0>; -+ #size-cells = <0>; -+ #sound-dai-cells = <0>; -+ compatible = "linux,spdif-dit"; -+ status = "okay"; -+ }; -+ -+ codec_in: card-codec { -+ #sound-dai-cells = <0>; -+ compatible = "invensense,ics43432"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ #sound-dai-cells = <0>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ snd: __overlay__ { -+ compatible = "simple-audio-card"; -+ simple-audio-card,name = "PiBell"; -+ -+ status="okay"; -+ -+ capture_link: simple-audio-card,dai-link@0 { -+ format = "i2s"; -+ -+ r_cpu_dai: cpu { -+ sound-dai = <&i2s>; -+ -+/* example TDM slot configuration -+ dai-tdm-slot-num = <2>; -+ dai-tdm-slot-width = <32>; -+*/ -+ }; -+ -+ r_codec_dai: codec { -+ sound-dai = <&codec_in>; -+ }; -+ }; -+ -+ playback_link: simple-audio-card,dai-link@1 { -+ format = "i2s"; -+ -+ p_cpu_dai: cpu { -+ sound-dai = <&i2s>; -+ -+/* example TDM slot configuration -+ dai-tdm-slot-num = <2>; -+ dai-tdm-slot-width = <32>; -+*/ -+ }; -+ -+ p_codec_dai: codec { -+ sound-dai = <&codec_out>; -+ }; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ alsaname = <&snd>, "simple-audio-card,name"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/piglow-overlay.dts b/arch/arm/boot/dts/overlays/piglow-overlay.dts -new file mode 100644 -index 000000000000..075bceef158c ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/piglow-overlay.dts -@@ -0,0 +1,97 @@ -+// Definitions for SN3218 LED driver from Si-En Technology on PiGlow -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ sn3218@54 { -+ compatible = "si-en,sn3218"; -+ reg = <0x54>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ led@1 { -+ reg = <1>; -+ label = "piglow:red:led1"; -+ }; -+ led@2 { -+ reg = <2>; -+ label = "piglow:orange:led2"; -+ }; -+ led@3 { -+ reg = <3>; -+ label = "piglow:yellow:led3"; -+ }; -+ led@4 { -+ reg = <4>; -+ label = "piglow:green:led4"; -+ }; -+ led@5 { -+ reg = <5>; -+ label = "piglow:blue:led5"; -+ }; -+ led@6 { -+ reg = <6>; -+ label = "piglow:green:led6"; -+ }; -+ led@7 { -+ reg = <7>; -+ label = "piglow:red:led7"; -+ }; -+ led@8 { -+ reg = <8>; -+ label = "piglow:orange:led8"; -+ }; -+ led@9 { -+ reg = <9>; -+ label = "piglow:yellow:led9"; -+ }; -+ led@10 { -+ reg = <10>; -+ label = "piglow:white:led10"; -+ }; -+ led@11 { -+ reg = <11>; -+ label = "piglow:white:led11"; -+ }; -+ led@12 { -+ reg = <12>; -+ label = "piglow:blue:led12"; -+ }; -+ led@13 { -+ reg = <13>; -+ label = "piglow:white:led13"; -+ }; -+ led@14 { -+ reg = <14>; -+ label = "piglow:green:led14"; -+ }; -+ led@15 { -+ reg = <15>; -+ label = "piglow:blue:led15"; -+ }; -+ led@16 { -+ reg = <16>; -+ label = "piglow:yellow:led16"; -+ }; -+ led@17 { -+ reg = <17>; -+ label = "piglow:orange:led17"; -+ }; -+ led@18 { -+ reg = <18>; -+ label = "piglow:red:led18"; -+ }; -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/piscreen-overlay.dts b/arch/arm/boot/dts/overlays/piscreen-overlay.dts -new file mode 100644 -index 000000000000..ae1af76d3923 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/piscreen-overlay.dts -@@ -0,0 +1,102 @@ -+/* -+ * Device Tree overlay for PiScreen 3.5" display shield by Ozzmaker -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ piscreen_pins: piscreen_pins { -+ brcm,pins = <17 25 24 22>; -+ brcm,function = <0 1 1 1>; /* in out out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ piscreen: piscreen@0{ -+ compatible = "ilitek,ili9486"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&piscreen_pins>; -+ -+ spi-max-frequency = <24000000>; -+ rotate = <270>; -+ bgr; -+ fps = <30>; -+ buswidth = <8>; -+ regwidth = <16>; -+ reset-gpios = <&gpio 25 0>; -+ dc-gpios = <&gpio 24 0>; -+ led-gpios = <&gpio 22 1>; -+ debug = <0>; -+ -+ init = <0x10000b0 0x00 -+ 0x1000011 -+ 0x20000ff -+ 0x100003a 0x55 -+ 0x1000036 0x28 -+ 0x10000c2 0x44 -+ 0x10000c5 0x00 0x00 0x00 0x00 -+ 0x10000e0 0x0f 0x1f 0x1c 0x0c 0x0f 0x08 0x48 0x98 0x37 0x0a 0x13 0x04 0x11 0x0d 0x00 -+ 0x10000e1 0x0f 0x32 0x2e 0x0b 0x0d 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00 -+ 0x10000e2 0x0f 0x32 0x2e 0x0b 0x0d 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00 -+ 0x1000011 -+ 0x1000029>; -+ }; -+ -+ piscreen_ts: piscreen-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <17 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 17 0>; -+ ti,swap-xy; -+ ti,x-plate-ohms = /bits/ 16 <100>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&piscreen>,"spi-max-frequency:0"; -+ rotate = <&piscreen>,"rotate:0"; -+ fps = <&piscreen>,"fps:0"; -+ debug = <&piscreen>,"debug:0"; -+ xohms = <&piscreen_ts>,"ti,x-plate-ohms;0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts b/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts -new file mode 100644 -index 000000000000..93b85be3f7c1 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/piscreen2r-overlay.dts -@@ -0,0 +1,106 @@ -+ /* -+ * Device Tree overlay for PiScreen2 3.5" TFT with resistive touch by Ozzmaker.com -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ piscreen2_pins: piscreen2_pins { -+ brcm,pins = <17 25 24 22>; -+ brcm,function = <0 1 1 1>; /* in out out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ piscreen2: piscreen2@0{ -+ compatible = "ilitek,ili9486"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&piscreen2_pins>; -+ bgr; -+ spi-max-frequency = <64000000>; -+ rotate = <90>; -+ fps = <30>; -+ buswidth = <8>; -+ regwidth = <16>; -+ txbuflen = <32768>; -+ reset-gpios = <&gpio 25 0>; -+ dc-gpios = <&gpio 24 0>; -+ led-gpios = <&gpio 22 1>; -+ debug = <0>; -+ -+ init = <0x10000b0 0x00 -+ 0x1000011 -+ 0x20000ff -+ 0x100003a 0x55 -+ 0x1000036 0x28 -+ 0x10000c0 0x11 0x09 -+ 0x10000c1 0x41 -+ 0x10000c5 0x00 0x00 0x00 0x00 -+ 0x10000b6 0x00 0x02 -+ 0x10000f7 0xa9 0x51 0x2c 0x2 -+ 0x10000be 0x00 0x04 -+ 0x10000e9 0x00 -+ 0x1000011 -+ 0x1000029>; -+ -+ }; -+ -+ piscreen2_ts: piscreen2-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <17 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 17 0>; -+ ti,swap-xy; -+ ti,x-plate-ohms = /bits/ 16 <100>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&piscreen2>,"spi-max-frequency:0"; -+ rotate = <&piscreen2>,"rotate:0"; -+ fps = <&piscreen2>,"fps:0"; -+ debug = <&piscreen2>,"debug:0"; -+ xohms = <&piscreen2_ts>,"ti,x-plate-ohms;0"; -+ }; -+}; -+ -diff --git a/arch/arm/boot/dts/overlays/pisound-overlay.dts b/arch/arm/boot/dts/overlays/pisound-overlay.dts -new file mode 100644 -index 000000000000..49efb2b768fb ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pisound-overlay.dts -@@ -0,0 +1,120 @@ -+/* -+ * Pisound Linux kernel module. -+ * Copyright (C) 2016-2017 Vilniaus Blokas UAB, https://blokas.io/pisound -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; version 2 of the -+ * License. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+#include <dt-bindings/gpio/gpio.h> -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&spi0>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pisound_spi: pisound_spi@0{ -+ compatible = "blokaslabs,pisound-spi"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins>; -+ spi-max-frequency = <1000000>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "/"; -+ __overlay__ { -+ pcm5102a-codec { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm5102a"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "blokaslabs,pisound"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ -+ pinctrl-0 = <&pisound_button_pins>; -+ -+ osr-gpios = -+ <&gpio 13 GPIO_ACTIVE_HIGH>, -+ <&gpio 26 GPIO_ACTIVE_HIGH>, -+ <&gpio 16 GPIO_ACTIVE_HIGH>; -+ -+ reset-gpios = -+ <&gpio 12 GPIO_ACTIVE_HIGH>, -+ <&gpio 24 GPIO_ACTIVE_HIGH>; -+ -+ data_available-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; -+ -+ button-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&gpio>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pisound_button_pins>; -+ -+ pisound_button_pins: pisound_button_pins { -+ brcm,pins = <17>; -+ brcm,function = <0>; // Input -+ brcm,pull = <2>; // Pull-Up -+ }; -+ }; -+ }; -+ -+ fragment@7 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/pitft22-overlay.dts b/arch/arm/boot/dts/overlays/pitft22-overlay.dts -new file mode 100644 -index 000000000000..589ad13795b1 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pitft22-overlay.dts -@@ -0,0 +1,69 @@ -+/* -+ * Device Tree overlay for pitft by Adafruit -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ -+ spidev@0{ -+ status = "disabled"; -+ }; -+ -+ spidev@1{ -+ status = "disabled"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ pitft_pins: pitft_pins { -+ brcm,pins = <25>; -+ brcm,function = <1>; /* out */ -+ brcm,pull = <0>; /* none */ -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pitft: pitft@0{ -+ compatible = "ilitek,ili9340"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pitft_pins>; -+ -+ spi-max-frequency = <32000000>; -+ rotate = <90>; -+ fps = <25>; -+ bgr; -+ buswidth = <8>; -+ dc-gpios = <&gpio 25 0>; -+ debug = <0>; -+ }; -+ -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&pitft>,"spi-max-frequency:0"; -+ rotate = <&pitft>,"rotate:0"; -+ fps = <&pitft>,"fps:0"; -+ debug = <&pitft>,"debug:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts b/arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts -new file mode 100644 -index 000000000000..33901ee1db7a ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts -@@ -0,0 +1,91 @@ -+/* -+ * Device Tree overlay for Adafruit PiTFT 2.8" capacitive touch screen -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ pitft_pins: pitft_pins { -+ brcm,pins = <24 25>; -+ brcm,function = <0 1>; /* in out */ -+ brcm,pull = <2 0>; /* pullup none */ -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pitft: pitft@0{ -+ compatible = "ilitek,ili9340"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pitft_pins>; -+ -+ spi-max-frequency = <32000000>; -+ rotate = <90>; -+ fps = <25>; -+ bgr; -+ buswidth = <8>; -+ dc-gpios = <&gpio 25 0>; -+ debug = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&i2c1>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ft6236: ft6236@38 { -+ compatible = "focaltech,ft6236"; -+ reg = <0x38>; -+ -+ interrupt-parent = <&gpio>; -+ interrupts = <24 2>; -+ touchscreen-size-x = <240>; -+ touchscreen-size-y = <320>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&pitft>,"spi-max-frequency:0"; -+ rotate = <&pitft>,"rotate:0"; -+ fps = <&pitft>,"fps:0"; -+ debug = <&pitft>,"debug:0"; -+ touch-sizex = <&ft6236>,"touchscreen-size-x?"; -+ touch-sizey = <&ft6236>,"touchscreen-size-y?"; -+ touch-invx = <&ft6236>,"touchscreen-inverted-x?"; -+ touch-invy = <&ft6236>,"touchscreen-inverted-y?"; -+ touch-swapxy = <&ft6236>,"touchscreen-swapped-x-y?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts -new file mode 100644 -index 000000000000..4a4a3f44c29d ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts -@@ -0,0 +1,119 @@ -+/* -+ * Device Tree overlay for Adafruit PiTFT 2.8" resistive touch screen -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ pitft_pins: pitft_pins { -+ brcm,pins = <24 25>; -+ brcm,function = <0 1>; /* in out */ -+ brcm,pull = <2 0>; /* pullup none */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pitft: pitft@0{ -+ compatible = "ilitek,ili9340"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pitft_pins>; -+ -+ spi-max-frequency = <32000000>; -+ rotate = <90>; -+ fps = <25>; -+ bgr; -+ buswidth = <8>; -+ dc-gpios = <&gpio 25 0>; -+ debug = <0>; -+ }; -+ -+ pitft_ts@1 { -+ compatible = "st,stmpe610"; -+ reg = <1>; -+ -+ spi-max-frequency = <500000>; -+ irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */ -+ interrupts = <24 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ -+ stmpe_touchscreen { -+ compatible = "st,stmpe-ts"; -+ st,sample-time = <4>; -+ st,mod-12b = <1>; -+ st,ref-sel = <0>; -+ st,adc-freq = <2>; -+ st,ave-ctrl = <3>; -+ st,touch-det-delay = <4>; -+ st,settling = <2>; -+ st,fraction-z = <7>; -+ st,i-drive = <0>; -+ }; -+ -+ stmpe_gpio: stmpe_gpio { -+ #gpio-cells = <2>; -+ compatible = "st,stmpe-gpio"; -+ /* -+ * only GPIO2 is wired/available -+ * and it is wired to the backlight -+ */ -+ st,norequest-mask = <0x7b>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@5 { -+ target-path = "/soc"; -+ __overlay__ { -+ backlight { -+ compatible = "gpio-backlight"; -+ gpios = <&stmpe_gpio 2 0>; -+ default-on; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&pitft>,"spi-max-frequency:0"; -+ rotate = <&pitft>,"rotate:0"; -+ fps = <&pitft>,"fps:0"; -+ debug = <&pitft>,"debug:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts b/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts -new file mode 100644 -index 000000000000..a69b6c2c7608 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts -@@ -0,0 +1,119 @@ -+/* -+ * Device Tree overlay for Adafruit PiTFT 3.5" resistive touch screen -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ pitft_pins: pitft_pins { -+ brcm,pins = <24 25>; -+ brcm,function = <0 1>; /* in out */ -+ brcm,pull = <2 0>; /* pullup none */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pitft: pitft@0{ -+ compatible = "himax,hx8357d"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pitft_pins>; -+ -+ spi-max-frequency = <32000000>; -+ rotate = <90>; -+ fps = <25>; -+ bgr; -+ buswidth = <8>; -+ dc-gpios = <&gpio 25 0>; -+ debug = <0>; -+ }; -+ -+ pitft_ts@1 { -+ compatible = "st,stmpe610"; -+ reg = <1>; -+ -+ spi-max-frequency = <500000>; -+ irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */ -+ interrupts = <24 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ -+ stmpe_touchscreen { -+ compatible = "st,stmpe-ts"; -+ st,sample-time = <4>; -+ st,mod-12b = <1>; -+ st,ref-sel = <0>; -+ st,adc-freq = <2>; -+ st,ave-ctrl = <3>; -+ st,touch-det-delay = <4>; -+ st,settling = <2>; -+ st,fraction-z = <7>; -+ st,i-drive = <0>; -+ }; -+ -+ stmpe_gpio: stmpe_gpio { -+ #gpio-cells = <2>; -+ compatible = "st,stmpe-gpio"; -+ /* -+ * only GPIO2 is wired/available -+ * and it is wired to the backlight -+ */ -+ st,norequest-mask = <0x7b>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@5 { -+ target-path = "/soc"; -+ __overlay__ { -+ backlight { -+ compatible = "gpio-backlight"; -+ gpios = <&stmpe_gpio 2 0>; -+ default-on; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&pitft>,"spi-max-frequency:0"; -+ rotate = <&pitft>,"rotate:0"; -+ fps = <&pitft>,"fps:0"; -+ debug = <&pitft>,"debug:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts b/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts -new file mode 100644 -index 000000000000..524a1c1d3670 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts -@@ -0,0 +1,38 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ pps: pps@12 { -+ compatible = "pps-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pps_pins>; -+ gpios = <&gpio 18 0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ pps_pins: pps_pins@12 { -+ brcm,pins = <18>; -+ brcm,function = <0>; // in -+ brcm,pull = <0>; // off -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpiopin = <&pps>,"gpios:4", -+ <&pps>,"reg:0", -+ <&pps_pins>,"brcm,pins:0", -+ <&pps_pins>,"reg:0"; -+ assert_falling_edge = <&pps>,"assert-falling-edge?"; -+ capture_clear = <&pps>,"capture-clear?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts b/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts -new file mode 100644 -index 000000000000..abdeddd0f2c8 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts -@@ -0,0 +1,47 @@ -+/dts-v1/; -+/plugin/; -+ -+/* -+This is the 2-channel overlay - only use it if you need both channels. -+ -+Legal pin,function combinations for each channel: -+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) -+ -+N.B.: -+ 1) Pin 18 is the only one available on all platforms, and -+ it is the one used by the I2S audio interface. -+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. -+ 2) The onboard analogue audio output uses both PWM channels. -+ 3) So be careful mixing audio and PWM. -+*/ -+ -+/ { -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ pwm_pins: pwm_pins { -+ brcm,pins = <18 19>; -+ brcm,function = <2 2>; /* Alt5 */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&pwm>; -+ frag1: __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pwm_pins>; -+ assigned-clock-rates = <100000000>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ pin = <&pwm_pins>,"brcm,pins:0"; -+ pin2 = <&pwm_pins>,"brcm,pins:4"; -+ func = <&pwm_pins>,"brcm,function:0"; -+ func2 = <&pwm_pins>,"brcm,function:4"; -+ clock = <&frag1>,"assigned-clock-rates:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/pwm-ir-tx-overlay.dts b/arch/arm/boot/dts/overlays/pwm-ir-tx-overlay.dts -new file mode 100644 -index 000000000000..119caf746b3b ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pwm-ir-tx-overlay.dts -@@ -0,0 +1,40 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ pwm0_pins: pwm0_pins { -+ brcm,pins = <18>; -+ brcm,function = <2>; /* Alt5 */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&pwm>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pwm0_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/"; -+ __overlay__ { -+ pwm-ir-transmitter { -+ compatible = "pwm-ir-tx"; -+ pwms = <&pwm 0 100>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpio_pin = <&pwm0_pins>, "brcm,pins:0"; -+ func = <&pwm0_pins>,"brcm,function:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/pwm-overlay.dts b/arch/arm/boot/dts/overlays/pwm-overlay.dts -new file mode 100644 -index 000000000000..27809e8dc746 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/pwm-overlay.dts -@@ -0,0 +1,43 @@ -+/dts-v1/; -+/plugin/; -+ -+/* -+Legal pin,function combinations for each channel: -+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) -+ -+N.B.: -+ 1) Pin 18 is the only one available on all platforms, and -+ it is the one used by the I2S audio interface. -+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2. -+ 2) The onboard analogue audio output uses both PWM channels. -+ 3) So be careful mixing audio and PWM. -+*/ -+ -+/ { -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ pwm_pins: pwm_pins { -+ brcm,pins = <18>; -+ brcm,function = <2>; /* Alt5 */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&pwm>; -+ frag1: __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pwm_pins>; -+ assigned-clock-rates = <100000000>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ pin = <&pwm_pins>,"brcm,pins:0"; -+ func = <&pwm_pins>,"brcm,function:0"; -+ clock = <&frag1>,"assigned-clock-rates:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/qca7000-overlay.dts b/arch/arm/boot/dts/overlays/qca7000-overlay.dts -new file mode 100644 -index 000000000000..9a451202a2eb ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/qca7000-overlay.dts -@@ -0,0 +1,55 @@ -+// Overlay for the Qualcomm Atheros QCA7000 on I2SE's PLC Stamp micro EVK -+// Visit: https://www.i2se.com/product/plc-stamp-micro-evk for details -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ eth1: qca7000@0 { -+ compatible = "qca,qca7000"; -+ reg = <0>; /* CE0 */ -+ pinctrl-names = "default"; -+ pinctrl-0 = <ð1_pins>; -+ interrupt-parent = <&gpio>; -+ interrupts = <23 0x1>; /* rising edge */ -+ spi-max-frequency = <12000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ eth1_pins: eth1_pins { -+ brcm,pins = <23>; -+ brcm,function = <0>; /* in */ -+ brcm,pull = <0>; /* none */ -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ int_pin = <ð1>, "interrupts:0", -+ <ð1_pins>, "brcm,pins:0"; -+ speed = <ð1>, "spi-max-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts b/arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts -new file mode 100644 -index 000000000000..ea1d952734e9 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts -@@ -0,0 +1,59 @@ -+// Device tree overlay for GPIO connected rotary encoder. -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ rotary_pins: rotary_pins@4 { -+ brcm,pins = <4 17>; /* gpio 4 17 */ -+ brcm,function = <0 0>; /* input */ -+ brcm,pull = <2 2>; /* pull-up */ -+ }; -+ -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ rotary: rotary@4 { -+ compatible = "rotary-encoder"; -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&rotary_pins>; -+ gpios = <&gpio 4 0>, <&gpio 17 0>; -+ linux,axis = <0>; /* REL_X */ -+ rotary-encoder,encoding = "gray"; -+ rotary-encoder,steps = <24>; /* 24 default */ -+ rotary-encoder,steps-per-period = <1>; /* corresponds to full period mode. See README */ -+ }; -+ }; -+ -+ }; -+ -+ __overrides__ { -+ pin_a = <&rotary>,"gpios:4", -+ <&rotary_pins>,"brcm,pins:0", -+ /* modify reg values to allow multiple instantiation */ -+ <&rotary>,"reg:0", -+ <&rotary_pins>,"reg:0"; -+ pin_b = <&rotary>,"gpios:16", -+ <&rotary_pins>,"brcm,pins:4"; -+ relative_axis = <&rotary>,"rotary-encoder,relative-axis?"; -+ linux_axis = <&rotary>,"linux,axis:0"; -+ rollover = <&rotary>,"rotary-encoder,rollover?"; -+ steps-per-period = <&rotary>,"rotary-encoder,steps-per-period:0"; -+ steps = <&rotary>,"rotary-encoder,steps:0"; -+ wakeup = <&rotary>,"wakeup-source?"; -+ encoding = <&rotary>,"rotary-encoder,encoding"; -+ /* legacy parameters*/ -+ rotary0_pin_a = <&rotary>,"gpios:4", -+ <&rotary_pins>,"brcm,pins:0"; -+ rotary0_pin_b = <&rotary>,"gpios:16", -+ <&rotary_pins>,"brcm,pins:4"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts b/arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts -new file mode 100644 -index 000000000000..cac5e44c6ec5 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts -@@ -0,0 +1,21 @@ -+/* -+ * Devicetree overlay for mailbox-driven Raspberry Pi DSI Display -+ * backlight controller -+ */ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ rpi_backlight: rpi_backlight { -+ compatible = "raspberrypi,rpi-backlight"; -+ firmware = <&firmware>; -+ status = "okay"; -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts -new file mode 100644 -index 000000000000..e2c25a0535e6 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts -@@ -0,0 +1,152 @@ -+// Definitions for the Cirrus Logic Audio Card -+/dts-v1/; -+/plugin/; -+#include <dt-bindings/pinctrl/bcm2835.h> -+#include <dt-bindings/gpio/gpio.h> -+#include <dt-bindings/mfd/arizona.h> -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ wlf_pins: wlf_pins { -+ brcm,pins = <17 22 27 8>; -+ brcm,function = < -+ BCM2835_FSEL_GPIO_OUT -+ BCM2835_FSEL_GPIO_OUT -+ BCM2835_FSEL_GPIO_IN -+ BCM2835_FSEL_GPIO_OUT -+ >; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/"; -+ __overlay__ { -+ rpi_cirrus_reg_1v8: rpi_cirrus_reg_1v8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "RPi-Cirrus 1v8"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-always-on; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&spi0>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm5102@1{ -+ compatible = "wlf,wm5102"; -+ reg = <1>; -+ -+ spi-max-frequency = <500000>; -+ -+ interrupt-parent = <&gpio>; -+ interrupts = <27 8>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ LDOVDD-supply = <&rpi_cirrus_reg_1v8>; -+ AVDD-supply = <&rpi_cirrus_reg_1v8>; -+ DBVDD1-supply = <&rpi_cirrus_reg_1v8>; -+ DBVDD2-supply = <&vdd_3v3_reg>; -+ DBVDD3-supply = <&vdd_3v3_reg>; -+ CPVDD-supply = <&rpi_cirrus_reg_1v8>; -+ SPKVDDL-supply = <&vdd_5v0_reg>; -+ SPKVDDR-supply = <&vdd_5v0_reg>; -+ DCVDD-supply = <&arizona_ldo1>; -+ -+ wlf,reset = <&gpio 17 GPIO_ACTIVE_HIGH>; -+ wlf,ldoena = <&gpio 22 GPIO_ACTIVE_HIGH>; -+ wlf,gpio-defaults = < -+ ARIZONA_GP_DEFAULT -+ ARIZONA_GP_DEFAULT -+ ARIZONA_GP_DEFAULT -+ ARIZONA_GP_DEFAULT -+ ARIZONA_GP_DEFAULT -+ >; -+ wlf,micd-configs = <0 1 0>; -+ wlf,dmic-ref = < -+ ARIZONA_DMIC_MICVDD -+ ARIZONA_DMIC_MICBIAS2 -+ ARIZONA_DMIC_MICVDD -+ ARIZONA_DMIC_MICVDD -+ >; -+ wlf,inmode = < -+ ARIZONA_INMODE_DIFF -+ ARIZONA_INMODE_DMIC -+ ARIZONA_INMODE_SE -+ ARIZONA_INMODE_DIFF -+ >; -+ status = "okay"; -+ -+ arizona_ldo1: ldo1 { -+ regulator-name = "LDO1"; -+ // default constraints as in -+ // arizona-ldo1.c -+ regulator-min-microvolt = <1200000>; -+ regulator-max-microvolt = <1800000>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&i2c1>; -+ __overlay__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ wm8804@3b { -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ status = "okay"; -+ PVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ wlf,reset-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ }; -+ -+ fragment@7 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "wlf,rpi-cirrus"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts b/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts -new file mode 100644 -index 000000000000..07a915342702 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-dac-overlay.dts -@@ -0,0 +1,34 @@ -+// Definitions for RPi DAC -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ pcm1794a-codec { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm1794a"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "rpi,rpi-dac"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/rpi-display-overlay.dts b/arch/arm/boot/dts/overlays/rpi-display-overlay.dts -new file mode 100644 -index 000000000000..a5eed07d6a4b ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-display-overlay.dts -@@ -0,0 +1,91 @@ -+/* -+ * Device Tree overlay for rpi-display by Watterott -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ rpi_display_pins: rpi_display_pins { -+ brcm,pins = <18 23 24 25>; -+ brcm,function = <1 1 1 0>; /* out out out in */ -+ brcm,pull = <0 0 0 2>; /* - - - up */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rpidisplay: rpi-display@0{ -+ compatible = "ilitek,ili9341"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&rpi_display_pins>; -+ -+ spi-max-frequency = <32000000>; -+ rotate = <270>; -+ bgr; -+ fps = <30>; -+ buswidth = <8>; -+ reset-gpios = <&gpio 23 0>; -+ dc-gpios = <&gpio 24 0>; -+ led-gpios = <&gpio 18 1>; -+ debug = <0>; -+ }; -+ -+ rpidisplay_ts: rpi-display-ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <25 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 25 0>; -+ ti,x-plate-ohms = /bits/ 16 <60>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ __overrides__ { -+ speed = <&rpidisplay>,"spi-max-frequency:0"; -+ rotate = <&rpidisplay>,"rotate:0"; -+ fps = <&rpidisplay>,"fps:0"; -+ debug = <&rpidisplay>,"debug:0"; -+ xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0"; -+ swapxy = <&rpidisplay_ts>,"ti,swap-xy?"; -+ backlight = <&rpidisplay>,"led-gpios:4", -+ <&rpi_display_pins>,"brcm,pins:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts b/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts -new file mode 100644 -index 000000000000..4dcb490f04b6 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts -@@ -0,0 +1,25 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/soc/firmware"; -+ __overlay__ { -+ ts: touchscreen { -+ compatible = "raspberrypi,firmware-ts"; -+ touchscreen-size-x = <800>; -+ touchscreen-size-y = <480>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ touchscreen-size-x = <&ts>,"touchscreen-size-x:0"; -+ touchscreen-size-y = <&ts>,"touchscreen-size-y:0"; -+ touchscreen-inverted-x = <&ts>,"touchscreen-inverted-x:?"; -+ touchscreen-inverted-y = <&ts>,"touchscreen-inverted-y:?"; -+ touchscreen-swapped-x-y = <&ts>,"touchscreen-swapped-x-y:?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts -new file mode 100644 -index 000000000000..21f8fe6f1229 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts -@@ -0,0 +1,70 @@ -+/* -+ * Overlay for the Raspberry Pi POE HAT. -+ */ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ fan0: rpi-poe-fan@0 { -+ compatible = "raspberrypi,rpi-poe-fan"; -+ firmware = <&firmware>; -+ cooling-min-state = <0>; -+ cooling-max-state = <2>; -+ #cooling-cells = <2>; -+ cooling-levels = <0 150 255>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&cpu_thermal>; -+ __overlay__ { -+ trips { -+ trip0: trip0 { -+ temperature = <50000>; -+ hysteresis = <5000>; -+ type = "active"; -+ }; -+ trip1: trip1 { -+ -+ temperature = <55000>; -+ hysteresis = <5000>; -+ type = "active"; -+ }; -+ }; -+ cooling-maps { -+ map0 { -+ trip = <&trip0>; -+ cooling-device = <&fan0 0 1>; -+ }; -+ map1 { -+ trip = <&trip1>; -+ cooling-device = <&fan0 1 2>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/__overrides__"; -+ __overlay__ { -+ poe_fan_temp0 = <&trip0>,"temperature:0"; -+ poe_fan_temp0_hyst = <&trip0>,"hysteresis:0"; -+ poe_fan_temp1 = <&trip1>,"temperature:0"; -+ poe_fan_temp1_hyst = <&trip1>,"hysteresis:0"; -+ }; -+ }; -+ -+ __overrides__ { -+ poe_fan_temp0 = <&trip0>,"temperature:0"; -+ poe_fan_temp0_hyst = <&trip0>,"hysteresis:0"; -+ poe_fan_temp1 = <&trip1>,"temperature:0"; -+ poe_fan_temp1_hyst = <&trip1>,"hysteresis:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts b/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts -new file mode 100644 -index 000000000000..9cda044a0f62 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-proto-overlay.dts -@@ -0,0 +1,39 @@ -+// Definitions for Rpi-Proto -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8731@1a { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8731"; -+ reg = <0x1a>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "rpi,rpi-proto"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts b/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts -new file mode 100644 -index 000000000000..89d8d2ea6b2e ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-sense-overlay.dts -@@ -0,0 +1,47 @@ -+// rpi-sense HAT -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ rpi-sense@46 { -+ compatible = "rpi,rpi-sense"; -+ reg = <0x46>; -+ keys-int-gpios = <&gpio 23 1>; -+ status = "okay"; -+ }; -+ -+ lsm9ds1-magn@1c { -+ compatible = "st,lsm9ds1-magn"; -+ reg = <0x1c>; -+ status = "okay"; -+ }; -+ -+ lsm9ds1-accel6a { -+ compatible = "st,lsm9ds1-accel"; -+ reg = <0x6a>; -+ status = "okay"; -+ }; -+ -+ lps25h-press@5c { -+ compatible = "st,lps25h-press"; -+ reg = <0x5c>; -+ status = "okay"; -+ }; -+ -+ hts221-humid@5f { -+ compatible = "st,hts221-humid", "st,hts221"; -+ reg = <0x5f>; -+ status = "okay"; -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts b/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts -new file mode 100644 -index 000000000000..3c97a545d820 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-tv-overlay.dts -@@ -0,0 +1,34 @@ -+// rpi-tv HAT -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ cxd2880@0 { -+ compatible = "sony,cxd2880"; -+ reg = <0>; /* CE0 */ -+ spi-max-frequency = <50000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+}; -diff --git a/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts -new file mode 100644 -index 000000000000..87e9a326eff1 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts -@@ -0,0 +1,49 @@ -+// Definitions for RRA DigiDAC1 Audio card -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ wm8804@3b { -+ #sound-dai-cells = <0>; -+ compatible = "wlf,wm8804"; -+ reg = <0x3b>; -+ status = "okay"; -+ PVDD-supply = <&vdd_3v3_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ }; -+ -+ wm8742: wm8741@1a { -+ compatible = "wlf,wm8741"; -+ reg = <0x1a>; -+ status = "okay"; -+ AVDD-supply = <&vdd_5v0_reg>; -+ DVDD-supply = <&vdd_3v3_reg>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "rra,digidac1-soundcard"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts -new file mode 100644 -index 000000000000..5fbff2e6c02d ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts -@@ -0,0 +1,38 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_arm>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ sc16is750: sc16is750@48 { -+ compatible = "nxp,sc16is750"; -+ reg = <0x48>; /* address */ -+ clocks = <&sc16is750_clk>; -+ interrupt-parent = <&gpio>; -+ interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */ -+ #gpio-cells = <2>; -+ -+ sc16is750_clk: sc16is750_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <14745600>; -+ }; -+ }; -+ }; -+ }; -+ -+ -+ __overrides__ { -+ int_pin = <&sc16is750>,"interrupts:0"; -+ addr = <&sc16is750>,"reg:0",<&sc16is750_clk>,"name"; -+ xtal = <&sc16is750>,"clock-frequency:0"; -+ }; -+ -+}; -diff --git a/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts b/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts -new file mode 100644 -index 000000000000..57ae35c38442 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts -@@ -0,0 +1,40 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ -+ frag1: __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ sc16is752: sc16is752@48 { -+ compatible = "nxp,sc16is752"; -+ reg = <0x48>; // i2c address -+ clocks = <&sc16is752_clk>; -+ interrupt-parent = <&gpio>; -+ interrupts = <24 0x2>; /* IRQ_TYPE_EDGE_FALLING */ -+ gpio-controller; -+ #gpio-cells = <0>; -+ i2c-max-frequency = <400000>; -+ status = "okay"; -+ -+ sc16is752_clk: sc16is752_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <14745600>; -+ }; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ int_pin = <&sc16is752>,"interrupts:0"; -+ addr = <&sc16is752>,"reg:0",<&sc16is752_clk>,"name"; -+ xtal = <&sc16is752_clk>,"clock-frequency:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts b/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts -new file mode 100644 -index 000000000000..4e33b14afc78 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts -@@ -0,0 +1,61 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi1_pins: spi1_pins { -+ brcm,pins = <19 20 21>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi1_cs_pins: spi1_cs_pins { -+ brcm,pins = <18>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi1>; -+ frag1: __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; -+ cs-gpios = <&gpio 18 1>; -+ status = "okay"; -+ -+ sc16is752: sc16is752@0 { -+ compatible = "nxp,sc16is752"; -+ reg = <0>; /* CE0 */ -+ clocks = <&sc16is752_clk>; -+ interrupt-parent = <&gpio>; -+ interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */ -+ #gpio-controller; -+ #gpio-cells = <2>; -+ spi-max-frequency = <4000000>; -+ -+ sc16is752_clk: sc16is752_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <14745600>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ int_pin = <&sc16is752>,"interrupts:0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/sdhost-overlay.dts b/arch/arm/boot/dts/overlays/sdhost-overlay.dts -new file mode 100644 -index 000000000000..0b72b4eeac88 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sdhost-overlay.dts -@@ -0,0 +1,38 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Provide backwards compatible aliases for the old sdhost dtparams. */ -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&sdhost>; -+ frag0: __overlay__ { -+ brcm,overclock-50 = <0>; -+ brcm,pio-limit = <1>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&mmc>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&mmcnr>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ __overrides__ { -+ overclock_50 = <&frag0>,"brcm,overclock-50:0"; -+ force_pio = <&frag0>,"brcm,force-pio?"; -+ pio_limit = <&frag0>,"brcm,pio-limit:0"; -+ debug = <&frag0>,"brcm,debug?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/sdio-overlay.dts b/arch/arm/boot/dts/overlays/sdio-overlay.dts -new file mode 100644 -index 000000000000..873e49056379 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts -@@ -0,0 +1,77 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Enable SDIO from MMC interface via various GPIO groups */ -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&mmcnr>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&mmc>; -+ sdio_ovl: __overlay__ { -+ pinctrl-0 = <&sdio_ovl_pins>; -+ pinctrl-names = "default"; -+ non-removable; -+ bus-width = <4>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ sdio_ovl_pins: sdio_ovl_pins { -+ brcm,pins = <22 23 24 25 26 27>; -+ brcm,function = <7>; /* ALT3 = SD1 */ -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sdio_ovl_pins>; -+ __dormant__ { -+ brcm,pins = <22 23 24 25>; -+ brcm,pull = <0 2 2 2>; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&sdio_ovl_pins>; -+ __dormant__ { -+ brcm,pins = <34 35 36 37>; -+ brcm,pull = <0 2 2 2>; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&sdio_ovl_pins>; -+ __dormant__ { -+ brcm,pins = <34 35 36 37 38 39>; -+ brcm,pull = <0 2 2 2 2 2>; -+ }; -+ }; -+ -+ fragment@6 { -+ target-path = "/aliases"; -+ __overlay__ { -+ mmc1 = "/soc/mmc@7e300000"; -+ }; -+ }; -+ -+ __overrides__ { -+ poll_once = <&sdio_ovl>,"non-removable?"; -+ bus_width = <&sdio_ovl>,"bus-width:0"; -+ sdio_overclock = <&sdio_ovl>,"brcm,overclock-50:0"; -+ gpios_22_25 = <0>,"=3"; -+ gpios_34_37 = <0>,"=4"; -+ gpios_34_39 = <0>,"=5"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/sdtweak-overlay.dts b/arch/arm/boot/dts/overlays/sdtweak-overlay.dts -new file mode 100644 -index 000000000000..38157d2f9bf3 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sdtweak-overlay.dts -@@ -0,0 +1,25 @@ -+/dts-v1/; -+/plugin/; -+ -+/* Provide backwards compatible aliases for the old sdhost dtparams. */ -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&sdhost>; -+ frag0: __overlay__ { -+ brcm,overclock-50 = <0>; -+ brcm,pio-limit = <1>; -+ }; -+ }; -+ -+ __overrides__ { -+ overclock_50 = <&frag0>,"brcm,overclock-50:0"; -+ force_pio = <&frag0>,"brcm,force-pio?"; -+ pio_limit = <&frag0>,"brcm,pio-limit:0"; -+ debug = <&frag0>,"brcm,debug?"; -+ enable = <&frag0>,"status"; -+ poll_once = <&frag0>,"non-removable?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/smi-dev-overlay.dts b/arch/arm/boot/dts/overlays/smi-dev-overlay.dts -new file mode 100644 -index 000000000000..b610d8283608 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/smi-dev-overlay.dts -@@ -0,0 +1,18 @@ -+// Description: Overlay to enable character device interface for SMI. -+// Author: Luke Wren <luke@raspberrypi.org> -+ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ fragment@0 { -+ target = <&soc>; -+ __overlay__ { -+ smi_dev { -+ compatible = "brcm,bcm2835-smi-dev"; -+ smi_handle = <&smi>; -+ status = "okay"; -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/smi-nand-overlay.dts b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts -new file mode 100644 -index 000000000000..ae1e50329d66 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/smi-nand-overlay.dts -@@ -0,0 +1,66 @@ -+// Description: Overlay to enable NAND flash through -+// the secondary memory interface -+// Author: Luke Wren -+ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&smi>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&smi_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&soc>; -+ __overlay__ { -+ nand: flash@0 { -+ compatible = "brcm,bcm2835-smi-nand"; -+ smi_handle = <&smi>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ status = "okay"; -+ -+ partition@0 { -+ label = "stage2"; -+ // 128k -+ reg = <0 0x20000>; -+ read-only; -+ }; -+ partition@1 { -+ label = "firmware"; -+ // 16M -+ reg = <0x20000 0x1000000>; -+ read-only; -+ }; -+ partition@2 { -+ label = "root"; -+ // 2G (will need to use 64 bit for >=4G) -+ reg = <0x1020000 0x80000000>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&gpio>; -+ __overlay__ { -+ smi_pins: smi_pins { -+ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 -+ 12 13 14 15>; -+ /* Alt 1: SMI */ -+ brcm,function = <5 5 5 5 5 5 5 5 5 5 5 -+ 5 5 5 5 5>; -+ /* /CS, /WE and /OE are pulled high, as they are -+ generally active low signals */ -+ brcm,pull = <2 2 2 2 2 2 2 2 0 0 0 0 0 0 0 0>; -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/smi-overlay.dts b/arch/arm/boot/dts/overlays/smi-overlay.dts -new file mode 100644 -index 000000000000..70104c11627c ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/smi-overlay.dts -@@ -0,0 +1,37 @@ -+// Description: Overlay to enable the secondary memory interface peripheral -+// Author: Luke Wren -+ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&smi>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&smi_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ smi_pins: smi_pins { -+ /* Don't configure the top two address bits, as -+ these are already used as ID_SD and ID_SC */ -+ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 13 14 15 -+ 16 17 18 19 20 21 22 23 24 25>; -+ /* Alt 0: SMI */ -+ brcm,function = <5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 -+ 5 5 5 5 5 5 5 5 5>; -+ /* /CS, /WE and /OE are pulled high, as they are -+ generally active low signals */ -+ brcm,pull = <2 2 2 2 2 2 0 0 0 0 0 0 0 0 0 0 0 -+ 0 0 0 0 0 0 0>; -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts b/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts -new file mode 100644 -index 000000000000..a132b8637c31 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts -@@ -0,0 +1,31 @@ -+/* -+ * Device tree overlay to move spi0 to gpio 35 to 39 on CM -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ cs-gpios = <&gpio 36 1>, <&gpio 35 1>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi0_cs_pins>; -+ __overlay__ { -+ brcm,pins = <36 35>; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spi0_pins>; -+ __overlay__ { -+ brcm,pins = <37 38 39>; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi-gpio40-45-overlay.dts b/arch/arm/boot/dts/overlays/spi-gpio40-45-overlay.dts -new file mode 100644 -index 000000000000..9ebcaf1b5ea0 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi-gpio40-45-overlay.dts -@@ -0,0 +1,36 @@ -+/* -+ * Boot EEPROM overlay -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi0_cs_pins>; -+ __overlay__ { -+ brcm,pins = <45 44 43>; -+ brcm,function = <1>; /* output */ -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spi0_pins>; -+ __overlay__ { -+ brcm,pins = <40 41 42>; -+ brcm,function = <3>; /* alt4 */ -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi-rtc-overlay.dts b/arch/arm/boot/dts/overlays/spi-rtc-overlay.dts -new file mode 100644 -index 000000000000..9664afc9845c ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi-rtc-overlay.dts -@@ -0,0 +1,33 @@ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spidev0>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ rtc-pcf2123@0 { -+ compatible = "nxp,rtc-pcf2123"; -+ spi-max-frequency = <5000000>; -+ spi-cs-high = <1>; -+ reg = <0>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ pcf2123 = <0>, "=0=1"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts b/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts -new file mode 100644 -index 000000000000..ff41439a483a ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts -@@ -0,0 +1,29 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <8 7>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi0>; -+ frag1: __overlay__ { -+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&frag0>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts b/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts -new file mode 100644 -index 000000000000..168a0dc80ad1 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi0-hw-cs-overlay.dts -@@ -0,0 +1,26 @@ -+/* -+ * Device tree overlay to re-enable hardware CS for SPI0 -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ cs-gpios = <0>, <0>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi0_cs_pins>; -+ __overlay__ { -+ brcm,pins = <8 7>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts -new file mode 100644 -index 000000000000..ea2794bc5fd5 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts -@@ -0,0 +1,57 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi1_pins: spi1_pins { -+ brcm,pins = <19 20 21>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi1_cs_pins: spi1_cs_pins { -+ brcm,pins = <18>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi1>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; -+ cs-gpios = <&gpio 18 1>; -+ status = "okay"; -+ -+ spidev1_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs0_spidev = <&spidev1_0>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts -new file mode 100644 -index 000000000000..dab34ee79ae2 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts -@@ -0,0 +1,69 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi1_pins: spi1_pins { -+ brcm,pins = <19 20 21>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi1_cs_pins: spi1_cs_pins { -+ brcm,pins = <18 17>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi1>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; -+ cs-gpios = <&gpio 18 1>, <&gpio 17 1>; -+ status = "okay"; -+ -+ spidev1_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev1_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&spi1_cs_pins>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs0_spidev = <&spidev1_0>,"status"; -+ cs1_spidev = <&spidev1_1>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts -new file mode 100644 -index 000000000000..bc7e7d04324b ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts -@@ -0,0 +1,81 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi1_pins: spi1_pins { -+ brcm,pins = <19 20 21>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi1_cs_pins: spi1_cs_pins { -+ brcm,pins = <18 17 16>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi1>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>; -+ cs-gpios = <&gpio 18 1>, <&gpio 17 1>, <&gpio 16 1>; -+ status = "okay"; -+ -+ spidev1_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev1_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev1_2: spidev@2 { -+ compatible = "spidev"; -+ reg = <2>; /* CE2 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&spi1_cs_pins>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs2_pin = <&spi1_cs_pins>,"brcm,pins:8", -+ <&frag1>,"cs-gpios:28"; -+ cs0_spidev = <&spidev1_0>,"status"; -+ cs1_spidev = <&spidev1_1>,"status"; -+ cs2_spidev = <&spidev1_2>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts -new file mode 100644 -index 000000000000..2a29750462af ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts -@@ -0,0 +1,57 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi2_pins: spi2_pins { -+ brcm,pins = <40 41 42>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi2_cs_pins: spi2_cs_pins { -+ brcm,pins = <43>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi2>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi2_pins &spi2_cs_pins>; -+ cs-gpios = <&gpio 43 1>; -+ status = "okay"; -+ -+ spidev2_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs0_spidev = <&spidev2_0>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts -new file mode 100644 -index 000000000000..642678fc9ddd ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts -@@ -0,0 +1,69 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi2_pins: spi2_pins { -+ brcm,pins = <40 41 42>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi2_cs_pins: spi2_cs_pins { -+ brcm,pins = <43 44>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi2>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi2_pins &spi2_cs_pins>; -+ cs-gpios = <&gpio 43 1>, <&gpio 44 1>; -+ status = "okay"; -+ -+ spidev2_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev2_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&spi2_cs_pins>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs0_spidev = <&spidev2_0>,"status"; -+ cs1_spidev = <&spidev2_1>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts -new file mode 100644 -index 000000000000..28d40c6c3c37 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts -@@ -0,0 +1,81 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&gpio>; -+ __overlay__ { -+ spi2_pins: spi2_pins { -+ brcm,pins = <40 41 42>; -+ brcm,function = <3>; /* alt4 */ -+ }; -+ -+ spi2_cs_pins: spi2_cs_pins { -+ brcm,pins = <43 44 45>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi2>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi2_pins &spi2_cs_pins>; -+ cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>; -+ status = "okay"; -+ -+ spidev2_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev2_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev2_2: spidev@2 { -+ compatible = "spidev"; -+ reg = <2>; /* CE2 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&aux>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&spi2_cs_pins>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs2_pin = <&spi2_cs_pins>,"brcm,pins:8", -+ <&frag1>,"cs-gpios:28"; -+ cs0_spidev = <&spidev2_0>,"status"; -+ cs1_spidev = <&spidev2_1>,"status"; -+ cs2_spidev = <&spidev2_2>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts b/arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts -new file mode 100644 -index 000000000000..335af8637051 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts -@@ -0,0 +1,44 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&spi3_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <0>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi3>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi3_pins &spi3_cs_pins>; -+ cs-gpios = <&gpio 0 1>; -+ status = "okay"; -+ -+ spidev3_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs0_spidev = <&spidev3_0>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts b/arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts -new file mode 100644 -index 000000000000..ce65da27f767 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts -@@ -0,0 +1,56 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&spi3_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <0 24>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi3>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi3_pins &spi3_cs_pins>; -+ cs-gpios = <&gpio 0 1>, <&gpio 24 1>; -+ status = "okay"; -+ -+ spidev3_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev3_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&frag0>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs0_spidev = <&spidev3_0>,"status"; -+ cs1_spidev = <&spidev3_1>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts b/arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts -new file mode 100644 -index 000000000000..85d70b40352b ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts -@@ -0,0 +1,44 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&spi4_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <4>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi4>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi4_pins &spi4_cs_pins>; -+ cs-gpios = <&gpio 4 1>; -+ status = "okay"; -+ -+ spidev4_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs0_spidev = <&spidev4_0>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts b/arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts -new file mode 100644 -index 000000000000..8bc2215a6a7e ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts -@@ -0,0 +1,56 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&spi4_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <4 25>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi4>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi4_pins &spi4_cs_pins>; -+ cs-gpios = <&gpio 4 1>, <&gpio 25 1>; -+ status = "okay"; -+ -+ spidev4_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev4_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&frag0>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs0_spidev = <&spidev4_0>,"status"; -+ cs1_spidev = <&spidev4_1>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts b/arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts -new file mode 100644 -index 000000000000..c0f8cb8510ee ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts -@@ -0,0 +1,44 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&spi5_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <12>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi5>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi5_pins &spi5_cs_pins>; -+ cs-gpios = <&gpio 12 1>; -+ status = "okay"; -+ -+ spidev5_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs0_spidev = <&spidev5_0>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts b/arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts -new file mode 100644 -index 000000000000..7758b9c00b4e ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts -@@ -0,0 +1,56 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&spi5_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <12 26>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi5>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi5_pins &spi5_cs_pins>; -+ cs-gpios = <&gpio 12 1>, <&gpio 26 1>; -+ status = "okay"; -+ -+ spidev5_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev5_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&frag0>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs0_spidev = <&spidev5_0>,"status"; -+ cs1_spidev = <&spidev5_1>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts b/arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts -new file mode 100644 -index 000000000000..8c8a953eca01 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts -@@ -0,0 +1,44 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&spi6_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <18>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi6>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi6_pins &spi6_cs_pins>; -+ cs-gpios = <&gpio 18 1>; -+ status = "okay"; -+ -+ spidev6_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs0_spidev = <&spidev6_0>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts b/arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts -new file mode 100644 -index 000000000000..2ff897f21aed ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts -@@ -0,0 +1,56 @@ -+/dts-v1/; -+/plugin/; -+ -+ -+/ { -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&spi6_cs_pins>; -+ frag0: __overlay__ { -+ brcm,pins = <18 27>; -+ brcm,function = <1>; /* output */ -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spi6>; -+ frag1: __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi6_pins &spi6_cs_pins>; -+ cs-gpios = <&gpio 18 1>, <&gpio 27 1>; -+ status = "okay"; -+ -+ spidev6_0: spidev@0 { -+ compatible = "spidev"; -+ reg = <0>; /* CE0 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ -+ spidev6_1: spidev@1 { -+ compatible = "spidev"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <125000000>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ cs0_pin = <&frag0>,"brcm,pins:0", -+ <&frag1>,"cs-gpios:4"; -+ cs1_pin = <&frag0>,"brcm,pins:4", -+ <&frag1>,"cs-gpios:16"; -+ cs0_spidev = <&spidev6_0>,"status"; -+ cs1_spidev = <&spidev6_1>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/ssd1306-overlay.dts b/arch/arm/boot/dts/overlays/ssd1306-overlay.dts -new file mode 100644 -index 000000000000..84cf10e489d3 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ssd1306-overlay.dts -@@ -0,0 +1,36 @@ -+// Overlay for SSD1306 128x64 and 128x32 OLED displays -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c1>; -+ __overlay__ { -+ status = "okay"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ssd1306: oled@3c{ -+ compatible = "solomon,ssd1306fb-i2c"; -+ reg = <0x3c>; -+ solomon,width = <128>; -+ solomon,height = <64>; -+ solomon,page-offset = <0>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ address = <&ssd1306>,"reg:0"; -+ width = <&ssd1306>,"solomon,width:0"; -+ height = <&ssd1306>,"solomon,height:0"; -+ offset = <&ssd1306>,"solomon,page-offset:0"; -+ normal = <&ssd1306>,"solomon,segment-no-remap?"; -+ sequential = <&ssd1306>,"solomon,com-seq?"; -+ remapped = <&ssd1306>,"solomon,com-lrremap?"; -+ inverted = <&ssd1306>,"solomon,com-invdir?"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/superaudioboard-overlay.dts b/arch/arm/boot/dts/overlays/superaudioboard-overlay.dts -new file mode 100755 -index 000000000000..bad61535981e ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/superaudioboard-overlay.dts -@@ -0,0 +1,73 @@ -+// Definitions for SuperAudioBoard -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "simple-audio-card"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ -+ simple-audio-card,name = "SuperAudioBoard"; -+ -+ simple-audio-card,widgets = -+ "Line", "Line In", -+ "Line", "Line Out"; -+ -+ simple-audio-card,routing = -+ "Line Out","AOUTA+", -+ "Line Out","AOUTA-", -+ "Line Out","AOUTB+", -+ "Line Out","AOUTB-", -+ "AINA","Line In", -+ "AINB","Line In"; -+ -+ simple-audio-card,format = "i2s"; -+ -+ simple-audio-card,bitclock-master = <&sound_master>; -+ simple-audio-card,frame-master = <&sound_master>; -+ -+ simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ dai-tdm-slot-num = <2>; -+ dai-tdm-slot-width = <32>; -+ }; -+ -+ sound_master: simple-audio-card,codec { -+ sound-dai = <&cs4271>; -+ system-clock-frequency = <24576000>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ cs4271: cs4271@10 { -+ #sound-dai-cells = <0>; -+ compatible = "cirrus,cs4271"; -+ reg = <0x10>; -+ status = "okay"; -+ reset-gpio = <&gpio 26 0>; /* Pin 26, active high */ -+ }; -+ }; -+ }; -+ __overrides__ { -+ gpiopin = <&cs4271>,"reset-gpio:4"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/sx150x-overlay.dts b/arch/arm/boot/dts/overlays/sx150x-overlay.dts -new file mode 100644 -index 000000000000..1d1069345da2 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sx150x-overlay.dts -@@ -0,0 +1,1706 @@ -+// Definitions for SX150x I2C GPIO Expanders from Semtech -+ -+// dtparams: -+// sx150<x>-<n>-<m> - Enables SX150X device on I2C#<n> with slave address <m>. <x> may be 1-9. -+// <n> may be 0 or 1. Permissible values of <m> (which is denoted in hex) -+// depend on the device variant. -+// For SX1501, SX1502, SX1504 and SX1505, <m> may be 20 or 21. -+// For SX1503 and SX1506, <m> may be 20. -+// For SX1507 and SX1509, <m> may be 3E, 3F, 70 or 71. -+// For SX1508, <m> may be 20, 21, 22 or 23. -+// sx150<x>-<n>-<m>-int-gpio - Integer, enables interrupts on SX150X device on I2C#<n> with slave address <m>, -+// specifies the GPIO pin to which NINT output of SX150X is connected. -+// -+// -+// Example 1: A single SX1505 device on I2C#1 with its slave address set to 0x20 and NINT output connected to GPIO25: -+// dtoverlay=sx150x:sx1505-1-20,sx1505-1-20-int-gpio=25 -+// -+// Example 2: Two SX1507 devices on I2C#0 with their slave addresses set to 0x3E and 0x70 (interrupts not used): -+// dtoverlay=sx150x:sx1507-0-3E,sx1507-0-70 -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ // Enable I2C#0 interface -+ fragment@0 { -+ target = <&i2c0>; -+ __dormant__ { -+ status = "okay"; -+ }; -+ }; -+ -+ // Enable I2C#1 interface -+ fragment@1 { -+ target = <&i2c1>; -+ __dormant__ { -+ status = "okay"; -+ }; -+ }; -+ -+ // Enable a SX1501 on I2C#0 at slave addr 0x20 -+ fragment@2 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1501_0_20: sx150x@20 { -+ compatible = "semtech,sx1501q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1501-0-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1501 on I2C#1 at slave addr 0x20 -+ fragment@3 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1501_1_20: sx150x@20 { -+ compatible = "semtech,sx1501q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1501-1-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1501 on I2C#0 at slave addr 0x21 -+ fragment@4 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1501_0_21: sx150x@21 { -+ compatible = "semtech,sx1501q"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1501-0-21-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1501 on I2C#1 at slave addr 0x21 -+ fragment@5 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1501_1_21: sx150x@21 { -+ compatible = "semtech,sx1501q"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1501-1-21-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1502 on I2C#0 at slave addr 0x20 -+ fragment@6 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1502_0_20: sx150x@20 { -+ compatible = "semtech,sx1502q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1502-0-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1502 on I2C#1 at slave addr 0x20 -+ fragment@7 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1502_1_20: sx150x@20 { -+ compatible = "semtech,sx1502q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1502-1-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1502 on I2C#0 at slave addr 0x21 -+ fragment@8 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1502_0_21: sx150x@21 { -+ compatible = "semtech,sx1502q"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1502-0-21-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1502 on I2C#1 at slave addr 0x21 -+ fragment@9 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1502_1_21: sx150x@21 { -+ compatible = "semtech,sx1502q"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1501-1-21-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1503 on I2C#0 at slave addr 0x20 -+ fragment@10 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1503_0_20: sx150x@20 { -+ compatible = "semtech,sx1503q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1503-0-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1503 on I2C#1 at slave addr 0x20 -+ fragment@11 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1503_1_20: sx150x@20 { -+ compatible = "semtech,sx1503q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1503-1-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1504 on I2C#0 at slave addr 0x20 -+ fragment@12 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1504_0_20: sx150x@20 { -+ compatible = "semtech,sx1504q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1504-0-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1504 on I2C#1 at slave addr 0x20 -+ fragment@13 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1504_1_20: sx150x@20 { -+ compatible = "semtech,sx1504q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1504-1-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1504 on I2C#0 at slave addr 0x21 -+ fragment@14 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1504_0_21: sx150x@21 { -+ compatible = "semtech,sx1504q"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1504-0-21-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1504 on I2C#1 at slave addr 0x21 -+ fragment@15 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1504_1_21: sx150x@21 { -+ compatible = "semtech,sx1504q"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1504-1-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1505 on I2C#0 at slave addr 0x20 -+ fragment@16 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1505_0_20: sx150x@20 { -+ compatible = "semtech,sx1505q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1505-0-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1505 on I2C#1 at slave addr 0x20 -+ fragment@17 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1505_1_20: sx150x@20 { -+ compatible = "semtech,sx1505q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1505-1-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1505 on I2C#0 at slave addr 0x21 -+ fragment@18 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1505_0_21: sx150x@21 { -+ compatible = "semtech,sx1505q"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1505-0-21-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1505 on I2C#1 at slave addr 0x21 -+ fragment@19 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1505_1_21: sx150x@21 { -+ compatible = "semtech,sx1505q"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1505-1-21-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1506 on I2C#0 at slave addr 0x20 -+ fragment@20 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1506_0_20: sx150x@20 { -+ compatible = "semtech,sx1506q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1506-0-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1506 on I2C#1 at slave addr 0x20 -+ fragment@21 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1506_1_20: sx150x@20 { -+ compatible = "semtech,sx1506q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1506-1-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1507 on I2C#0 at slave addr 0x3E -+ fragment@22 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1507_0_3E: sx150x@3E { -+ compatible = "semtech,sx1507q"; -+ reg = <0x3E>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1507_0_3E-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1507 on I2C#1 at slave addr 0x3E -+ fragment@23 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1507_1_3E: sx150x@3E { -+ compatible = "semtech,sx1507q"; -+ reg = <0x3E>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1507_1_3E-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1507 on I2C#0 at slave addr 0x3F -+ fragment@24 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1507_0_3F: sx150x@3F { -+ compatible = "semtech,sx1507q"; -+ reg = <0x3F>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1507_0_3F-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1507 on I2C#1 at slave addr 0x3F -+ fragment@25 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1507_1_3F: sx150x@3F { -+ compatible = "semtech,sx1507q"; -+ reg = <0x3F>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1507_1_3F-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1507 on I2C#0 at slave addr 0x70 -+ fragment@26 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1507_0_70: sx150x@70 { -+ compatible = "semtech,sx1507q"; -+ reg = <0x70>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1507-0-70-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1507 on I2C#1 at slave addr 0x70 -+ fragment@27 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1507_1_70: sx150x@70 { -+ compatible = "semtech,sx1507q"; -+ reg = <0x70>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1507-1-70-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1507 on I2C#0 at slave addr 0x71 -+ fragment@28 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1507_0_71: sx150x@71 { -+ compatible = "semtech,sx1507q"; -+ reg = <0x71>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1507-0-71-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1507 on I2C#1 at slave addr 0x71 -+ fragment@29 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1507_1_71: sx150x@71 { -+ compatible = "semtech,sx1507q"; -+ reg = <0x71>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1507-1-71-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1508 on I2C#0 at slave addr 0x20 -+ fragment@30 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1508_0_20: sx150x@20 { -+ compatible = "semtech,sx1508q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1508-0-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1508 on I2C#1 at slave addr 0x20 -+ fragment@31 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1508_1_20: sx150x@20 { -+ compatible = "semtech,sx1508q"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1508-1-20-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1508 on I2C#0 at slave addr 0x21 -+ fragment@32 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1508_0_21: sx150x@21 { -+ compatible = "semtech,sx1508q"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1508-0-21-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1508 on I2C#1 at slave addr 0x21 -+ fragment@33 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1508_1_21: sx150x@21 { -+ compatible = "semtech,sx1508q"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1508-1-21-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1508 on I2C#0 at slave addr 0x22 -+ fragment@34 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1508_0_22: sx150x@22 { -+ compatible = "semtech,sx1508q"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1508-0-22-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1508 on I2C#1 at slave addr 0x22 -+ fragment@35 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1508_1_22: sx150x@22 { -+ compatible = "semtech,sx1508q"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1508-1-22-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1508 on I2C#0 at slave addr 0x23 -+ fragment@36 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1508_0_23: sx150x@23 { -+ compatible = "semtech,sx1508q"; -+ reg = <0x23>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1508-0-23-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1508 on I2C#1 at slave addr 0x23 -+ fragment@37 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1508_1_23: sx150x@23 { -+ compatible = "semtech,sx1508q"; -+ reg = <0x23>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1508-1-23-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1509 on I2C#0 at slave addr 0x3E -+ fragment@38 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1509_0_3E: sx150x@3E { -+ compatible = "semtech,sx1509q"; -+ reg = <0x3E>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1509_0_3E-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1509 on I2C#1 at slave addr 0x3E -+ fragment@39 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1509_1_3E: sx150x@3E { -+ compatible = "semtech,sx1509q"; -+ reg = <0x3E>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1509_1_3E-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1509 on I2C#0 at slave addr 0x3F -+ fragment@40 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1509_0_3F: sx150x@3F { -+ compatible = "semtech,sx1509q"; -+ reg = <0x3F>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1509_0_3F-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1509 on I2C#1 at slave addr 0x3F -+ fragment@41 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1509_1_3F: sx150x@3F { -+ compatible = "semtech,sx1509q"; -+ reg = <0x3F>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1509_1_3F-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1509 on I2C#0 at slave addr 0x70 -+ fragment@42 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1509_0_70: sx150x@70 { -+ compatible = "semtech,sx1509q"; -+ reg = <0x70>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1509-0-70-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1509 on I2C#1 at slave addr 0x70 -+ fragment@43 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1509_1_70: sx150x@70 { -+ compatible = "semtech,sx1509q"; -+ reg = <0x70>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1509-1-70-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1509 on I2C#0 at slave addr 0x71 -+ fragment@44 { -+ target = <&i2c0>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1509_0_71: sx150x@71 { -+ compatible = "semtech,sx1509q"; -+ reg = <0x71>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1509-0-71-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable a SX1509 on I2C#1 at slave addr 0x71 -+ fragment@45 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sx1509_1_71: sx150x@71 { -+ compatible = "semtech,sx1509q"; -+ reg = <0x71>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ interrupts = <25 2>; /* 1st word overwritten by sx1509-1-71-int-gpio parameter -+ 2nd word is 2 for falling-edge triggered */ -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1501 on I2C#0 at slave addr 0x20 -+ fragment@46 { -+ target = <&sx1501_0_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1501 on I2C#1 at slave addr 0x20 -+ fragment@47 { -+ target = <&sx1501_1_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1501 on I2C#0 at slave addr 0x21 -+ fragment@48 { -+ target = <&sx1501_0_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_21_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1501 on I2C#1 at slave addr 0x21 -+ fragment@49 { -+ target = <&sx1501_1_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_21_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1502 on I2C#0 at slave addr 0x20 -+ fragment@50 { -+ target = <&sx1502_0_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1502 on I2C#1 at slave addr 0x20 -+ fragment@51 { -+ target = <&sx1502_1_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1502 on I2C#0 at slave addr 0x21 -+ fragment@52 { -+ target = <&sx1502_0_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_21_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1502 on I2C#1 at slave addr 0x21 -+ fragment@53 { -+ target = <&sx1502_1_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_21_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1503 on I2C#0 at slave addr 0x20 -+ fragment@54 { -+ target = <&sx1503_0_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1503 on I2C#1 at slave addr 0x20 -+ fragment@55 { -+ target = <&sx1503_1_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1504 on I2C#0 at slave addr 0x20 -+ fragment@56 { -+ target = <&sx1504_0_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1504 on I2C#1 at slave addr 0x20 -+ fragment@57 { -+ target = <&sx1504_1_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1504 on I2C#0 at slave addr 0x21 -+ fragment@58 { -+ target = <&sx1504_0_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_21_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1504 on I2C#1 at slave addr 0x21 -+ fragment@59 { -+ target = <&sx1504_1_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_21_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1505 on I2C#0 at slave addr 0x20 -+ fragment@60 { -+ target = <&sx1505_0_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1505 on I2C#1 at slave addr 0x20 -+ fragment@61 { -+ target = <&sx1505_1_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1505 on I2C#0 at slave addr 0x21 -+ fragment@62 { -+ target = <&sx1505_0_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_21_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1505 on I2C#1 at slave addr 0x21 -+ fragment@63 { -+ target = <&sx1505_1_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_21_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1506 on I2C#0 at slave addr 0x20 -+ fragment@64 { -+ target = <&sx1506_0_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1506 on I2C#1 at slave addr 0x20 -+ fragment@65 { -+ target = <&sx1506_1_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x3E -+ fragment@66 { -+ target = <&sx1507_0_3E>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_3E_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x3E -+ fragment@67 { -+ target = <&sx1507_1_3E>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_3E_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x3F -+ fragment@68 { -+ target = <&sx1507_0_3F>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_3F_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x3F -+ fragment@69 { -+ target = <&sx1507_1_3F>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_3F_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x70 -+ fragment@70 { -+ target = <&sx1507_0_70>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_70_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x70 -+ fragment@71 { -+ target = <&sx1507_1_70>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_70_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x71 -+ fragment@72 { -+ target = <&sx1507_0_71>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_71_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x71 -+ fragment@73 { -+ target = <&sx1507_1_71>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_71_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x20 -+ fragment@74 { -+ target = <&sx1508_0_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x20 -+ fragment@75 { -+ target = <&sx1508_1_20>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_20_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x21 -+ fragment@76 { -+ target = <&sx1508_0_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_21_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x21 -+ fragment@77 { -+ target = <&sx1508_1_21>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_21_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x22 -+ fragment@78 { -+ target = <&sx1508_0_22>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_22_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x22 -+ fragment@79 { -+ target = <&sx1508_1_22>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_22_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x23 -+ fragment@80 { -+ target = <&sx1508_0_23>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_23_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x23 -+ fragment@81 { -+ target = <&sx1508_1_23>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_23_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x3E -+ fragment@82 { -+ target = <&sx1509_0_3E>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_3E_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x3E -+ fragment@83 { -+ target = <&sx1509_1_3E>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_3E_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x3F -+ fragment@84 { -+ target = <&sx1509_0_3F>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_3F_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x3F -+ fragment@85 { -+ target = <&sx1509_1_3F>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_3F_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x70 -+ fragment@86 { -+ target = <&sx1509_0_70>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_70_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x70 -+ fragment@87 { -+ target = <&sx1509_1_70>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_70_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x71 -+ fragment@88 { -+ target = <&sx1509_0_71>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_0_71_pins>; -+ }; -+ }; -+ -+ // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x71 -+ fragment@89 { -+ target = <&sx1509_1_71>; -+ __dormant__ { -+ interrupt-parent = <&gpio>; -+ interrupt-controller; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sx150x_1_71_pins>; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x20 -+ // Configure as a input with no pull-up/down -+ fragment@90 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_0_20_pins: sx150x_0_20_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-0-20-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x20 -+ // Configure as a input with no pull-up/down -+ fragment@91 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_1_20_pins: sx150x_1_20_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-1-20-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x21 -+ // Configure as a input with no pull-up/down -+ fragment@92 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_0_21_pins: sx150x_0_21_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-0-21-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x21 -+ // Configure as a input with no pull-up/down -+ fragment@93 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_1_21_pins: sx150x_1_21_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-1-21-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x22 -+ // Configure as a input with no pull-up/down -+ fragment@94 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_0_22_pins: sx150x_0_22_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-0-22-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x22 -+ // Configure as a input with no pull-up/down -+ fragment@95 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_1_22_pins: sx150x_1_22_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-1-22-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x23 -+ // Configure as a input with no pull-up/down -+ fragment@96 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_0_23_pins: sx150x_0_23_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-0-23-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x23 -+ // Configure as a input with no pull-up/down -+ fragment@97 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_1_23_pins: sx150x_1_23_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-1-23-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x3E -+ // Configure as a input with no pull-up/down -+ fragment@98 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_0_3E_pins: sx150x_0_3E_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-0-3E-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x3E -+ // Configure as a input with no pull-up/down -+ fragment@99 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_1_3E_pins: sx150x_1_3E_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-1-3E-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x3F -+ // Configure as a input with no pull-up/down -+ fragment@100 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_0_3F_pins: sx150x_0_3F_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-0-3F-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x3F -+ // Configure as a input with no pull-up/down -+ fragment@101 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_1_3F_pins: sx150x_1_3F_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-1-3F-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x70 -+ // Configure as a input with no pull-up/down -+ fragment@102 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_0_70_pins: sx150x_0_70_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-0-70-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x70 -+ // Configure as a input with no pull-up/down -+ fragment@103 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_1_70_pins: sx150x_1_70_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-1-70-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x71 -+ // Configure as a input with no pull-up/down -+ fragment@104 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_0_71_pins: sx150x_0_71_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-0-71-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x71 -+ // Configure as a input with no pull-up/down -+ fragment@105 { -+ target = <&gpio>; -+ __dormant__ { -+ sx150x_1_71_pins: sx150x_1_71_pins { -+ brcm,pins = <0>; /* overwritten by sx150x-1-71-int-gpio parameter */ -+ brcm,function = <0>; -+ brcm,pull = <0>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ sx1501-0-20 = <0>,"+0+2"; -+ sx1501-1-20 = <0>,"+1+3"; -+ sx1501-0-21 = <0>,"+0+4"; -+ sx1501-1-21 = <0>,"+1+5"; -+ sx1502-0-20 = <0>,"+0+6"; -+ sx1502-1-20 = <0>,"+1+7"; -+ sx1502-0-21 = <0>,"+0+8"; -+ sx1502-1-21 = <0>,"+1+9"; -+ sx1503-0-20 = <0>,"+0+10"; -+ sx1503-1-20 = <0>,"+1+11"; -+ sx1504-0-20 = <0>,"+0+12"; -+ sx1504-1-20 = <0>,"+1+13"; -+ sx1504-0-21 = <0>,"+0+14"; -+ sx1504-1-21 = <0>,"+1+15"; -+ sx1505-0-20 = <0>,"+0+16"; -+ sx1505-1-20 = <0>,"+1+17"; -+ sx1505-0-21 = <0>,"+0+18"; -+ sx1505-1-21 = <0>,"+1+19"; -+ sx1506-0-20 = <0>,"+0+20"; -+ sx1506-1-20 = <0>,"+1+21"; -+ sx1507-0-3E = <0>,"+0+22"; -+ sx1507-1-3E = <0>,"+1+23"; -+ sx1507-0-3F = <0>,"+0+24"; -+ sx1507-1-3F = <0>,"+1+25"; -+ sx1507-0-70 = <0>,"+0+26"; -+ sx1507-1-70 = <0>,"+1+27"; -+ sx1507-0-71 = <0>,"+0+28"; -+ sx1507-1-71 = <0>,"+1+29"; -+ sx1508-0-20 = <0>,"+0+30"; -+ sx1508-1-20 = <0>,"+1+31"; -+ sx1508-0-21 = <0>,"+0+32"; -+ sx1508-1-21 = <0>,"+1+33"; -+ sx1508-0-22 = <0>,"+0+34"; -+ sx1508-1-22 = <0>,"+1+35"; -+ sx1508-0-23 = <0>,"+0+36"; -+ sx1508-1-23 = <0>,"+1+37"; -+ sx1509-0-3E = <0>,"+0+38"; -+ sx1509-1-3E = <0>,"+1+39"; -+ sx1509-0-3F = <0>,"+0+40"; -+ sx1509-1-3F = <0>,"+1+41"; -+ sx1509-0-70 = <0>,"+0+42"; -+ sx1509-1-70 = <0>,"+1+43"; -+ sx1509-0-71 = <0>,"+0+44"; -+ sx1509-1-71 = <0>,"+1+45"; -+ sx1501-0-20-int-gpio = <0>,"+46+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1501_0_20>,"interrupts:0"; -+ sx1501-1-20-int-gpio = <0>,"+47+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1501_1_20>,"interrupts:0"; -+ sx1501-0-21-int-gpio = <0>,"+48+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1501_0_21>,"interrupts:0"; -+ sx1501-1-21-int-gpio = <0>,"+49+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1501_1_21>,"interrupts:0"; -+ sx1502-0-20-int-gpio = <0>,"+50+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1502_0_20>,"interrupts:0"; -+ sx1502-1-20-int-gpio = <0>,"+51+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1502_1_20>,"interrupts:0"; -+ sx1502-0-21-int-gpio = <0>,"+52+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1502_0_21>,"interrupts:0"; -+ sx1502-1-21-int-gpio = <0>,"+53+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1502_1_21>,"interrupts:0"; -+ sx1503-0-20-int-gpio = <0>,"+54+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1503_0_20>,"interrupts:0"; -+ sx1503-1-20-int-gpio = <0>,"+55+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1503_1_20>,"interrupts:0"; -+ sx1504-0-20-int-gpio = <0>,"+56+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1504_0_20>,"interrupts:0"; -+ sx1504-1-20-int-gpio = <0>,"+57+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1504_1_20>,"interrupts:0"; -+ sx1504-0-21-int-gpio = <0>,"+58+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1504_0_21>,"interrupts:0"; -+ sx1504-1-21-int-gpio = <0>,"+59+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1504_1_21>,"interrupts:0"; -+ sx1505-0-20-int-gpio = <0>,"+60+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1505_0_20>,"interrupts:0"; -+ sx1505-1-20-int-gpio = <0>,"+61+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1505_1_20>,"interrupts:0"; -+ sx1505-0-21-int-gpio = <0>,"+62+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1505_0_21>,"interrupts:0"; -+ sx1505-1-21-int-gpio = <0>,"+63+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1505_1_21>,"interrupts:0"; -+ sx1506-0-20-int-gpio = <0>,"+64+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1506_0_20>,"interrupts:0"; -+ sx1506-1-20-int-gpio = <0>,"+65+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1506_1_20>,"interrupts:0"; -+ sx1507-0-3E-int-gpio = <0>,"+66+98", <&sx150x_0_3E_pins>,"brcm,pins:0", <&sx1507_0_3E>,"interrupts:0"; -+ sx1507-1-3E-int-gpio = <0>,"+67+99", <&sx150x_1_3E_pins>,"brcm,pins:0", <&sx1507_1_3E>,"interrupts:0"; -+ sx1507-0-3F-int-gpio = <0>,"+68+100", <&sx150x_0_3F_pins>,"brcm,pins:0", <&sx1507_0_3F>,"interrupts:0"; -+ sx1507-1-3F-int-gpio = <0>,"+69+101", <&sx150x_1_3F_pins>,"brcm,pins:0", <&sx1507_1_3F>,"interrupts:0"; -+ sx1507-0-70-int-gpio = <0>,"+60+102", <&sx150x_0_70_pins>,"brcm,pins:0", <&sx1507_0_70>,"interrupts:0"; -+ sx1507-1-70-int-gpio = <0>,"+71+103", <&sx150x_1_70_pins>,"brcm,pins:0", <&sx1507_1_70>,"interrupts:0"; -+ sx1507-0-71-int-gpio = <0>,"+72+104", <&sx150x_0_71_pins>,"brcm,pins:0", <&sx1507_0_71>,"interrupts:0"; -+ sx1507-1-71-int-gpio = <0>,"+73+105", <&sx150x_1_71_pins>,"brcm,pins:0", <&sx1507_1_71>,"interrupts:0"; -+ sx1508-0-20-int-gpio = <0>,"+74+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1508_0_20>,"interrupts:0"; -+ sx1508-1-20-int-gpio = <0>,"+75+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1508_1_20>,"interrupts:0"; -+ sx1508-0-21-int-gpio = <0>,"+76+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1508_0_21>,"interrupts:0"; -+ sx1508-1-21-int-gpio = <0>,"+77+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1508_1_21>,"interrupts:0"; -+ sx1508-0-22-int-gpio = <0>,"+78+94", <&sx150x_0_22_pins>,"brcm,pins:0", <&sx1508_0_22>,"interrupts:0"; -+ sx1508-1-22-int-gpio = <0>,"+79+95", <&sx150x_1_22_pins>,"brcm,pins:0", <&sx1508_1_22>,"interrupts:0"; -+ sx1508-0-23-int-gpio = <0>,"+80+96", <&sx150x_0_23_pins>,"brcm,pins:0", <&sx1508_0_23>,"interrupts:0"; -+ sx1508-1-23-int-gpio = <0>,"+81+97", <&sx150x_1_23_pins>,"brcm,pins:0", <&sx1508_1_23>,"interrupts:0"; -+ sx1509-0-3E-int-gpio = <0>,"+82+98", <&sx150x_0_3E_pins>,"brcm,pins:0", <&sx1509_0_3E>,"interrupts:0"; -+ sx1509-1-3E-int-gpio = <0>,"+83+99", <&sx150x_1_3E_pins>,"brcm,pins:0", <&sx1509_1_3E>,"interrupts:0"; -+ sx1509-0-3F-int-gpio = <0>,"+84+100", <&sx150x_0_3F_pins>,"brcm,pins:0", <&sx1509_0_3F>,"interrupts:0"; -+ sx1509-1-3F-int-gpio = <0>,"+85+101", <&sx150x_1_3F_pins>,"brcm,pins:0", <&sx1509_1_3F>,"interrupts:0"; -+ sx1509-0-70-int-gpio = <0>,"+86+102", <&sx150x_0_70_pins>,"brcm,pins:0", <&sx1509_0_70>,"interrupts:0"; -+ sx1509-1-70-int-gpio = <0>,"+87+103", <&sx150x_1_70_pins>,"brcm,pins:0", <&sx1509_1_70>,"interrupts:0"; -+ sx1509-0-71-int-gpio = <0>,"+88+104", <&sx150x_0_71_pins>,"brcm,pins:0", <&sx1509_0_71>,"interrupts:0"; -+ sx1509-1-71-int-gpio = <0>,"+89+105", <&sx150x_1_71_pins>,"brcm,pins:0", <&sx1509_1_71>,"interrupts:0"; -+ }; -+}; -+ -diff --git a/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts b/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts -new file mode 100644 -index 000000000000..047695bb0c71 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts -@@ -0,0 +1,52 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions to add I2S audio from the Toshiba TC358743 HDMI to CSI2 bridge. -+// Requires tc358743 overlay to have been loaded to actually function. -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ tc358743_codec: tc358743-codec { -+ #sound-dai-cells = <0>; -+ compatible = "linux,spdif-dir"; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sound>; -+ sound_overlay: __overlay__ { -+ compatible = "simple-audio-card"; -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,name = "tc358743"; -+ simple-audio-card,bitclock-master = <&dailink0_slave>; -+ simple-audio-card,frame-master = <&dailink0_slave>; -+ status = "okay"; -+ -+ simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ dai-tdm-slot-num = <2>; -+ dai-tdm-slot-width = <32>; -+ }; -+ dailink0_slave: simple-audio-card,codec { -+ sound-dai = <&tc358743_codec>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ card-name = <&sound_overlay>,"simple-audio-card,name"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/tc358743-overlay.dts b/arch/arm/boot/dts/overlays/tc358743-overlay.dts -new file mode 100644 -index 000000000000..2a1a3a80de49 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/tc358743-overlay.dts -@@ -0,0 +1,116 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+// Definitions for Toshiba TC358743 HDMI to CSI2 bridge on VC I2C bus -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ tc358743@0f { -+ compatible = "toshiba,tc358743"; -+ reg = <0x0f>; -+ status = "okay"; -+ -+ clocks = <&tc358743_clk>; -+ clock-names = "refclk"; -+ -+ tc358743_clk: bridge-clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <27000000>; -+ }; -+ -+ port { -+ tc358743: endpoint { -+ remote-endpoint = <&csi1_ep>; -+ clock-lanes = <0>; -+ clock-noncontinuous; -+ link-frequencies = -+ /bits/ 64 <486000000>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&csi1>; -+ __overlay__ { -+ status = "okay"; -+ -+ port { -+ csi1_ep: endpoint { -+ remote-endpoint = <&tc358743>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ tc358743@0f { -+ port { -+ endpoint { -+ data-lanes = <1 2>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&i2c_vc>; -+ __dormant__ { -+ tc358743@0f { -+ port { -+ endpoint { -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <28 29>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@5 { -+ target = <&i2c0_pins>; -+ __overlay__ { -+ brcm,pins = <44 45>; -+ brcm,function = <5>; /* alt1 */ -+ }; -+ }; -+ fragment@6 { -+ target = <&i2c0_pins>; -+ __dormant__ { -+ brcm,pins = <0 1>; -+ brcm,function = <4>; /* alt0 */ -+ }; -+ }; -+ fragment@7 { -+ target = <&i2c_vc>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ i2c_pins_0_1 = <0>,"-4-5+6"; -+ i2c_pins_28_29 = <0>,"+4-5-6"; -+ 4lane = <0>, "-2+3"; -+ link-frequency = <&tc358743>,"link-frequencies#0"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts -new file mode 100644 -index 000000000000..254ac2e0a214 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/tinylcd35-overlay.dts -@@ -0,0 +1,222 @@ -+/* -+ * tinylcd35-overlay.dts -+ * -+ * ------------------------------------------------- -+ * www.tinlylcd.com -+ * ------------------------------------------------- -+ * Device---Driver-----BUS GPIO's -+ * display tinylcd35 spi0.0 25 24 18 -+ * touch ads7846 spi0.1 5 -+ * rtc ds1307 i2c1-0068 -+ * rtc pcf8563 i2c1-0051 -+ * keypad gpio-keys --------- 17 22 27 23 28 -+ * -+ * -+ * TinyLCD.com 3.5 inch TFT -+ * -+ * Version 001 -+ * 5/3/2015 -- Noralf Trønnes Initial Device tree framework -+ * 10/3/2015 -- tinylcd@gmail.com added ds1307 support. -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ tinylcd35_pins: tinylcd35_pins { -+ brcm,pins = <25 24 18>; -+ brcm,function = <1>; /* out */ -+ }; -+ tinylcd35_ts_pins: tinylcd35_ts_pins { -+ brcm,pins = <5>; -+ brcm,function = <0>; /* in */ -+ }; -+ keypad_pins: keypad_pins { -+ brcm,pins = <4 17 22 23 27>; -+ brcm,function = <0>; /* in */ -+ brcm,pull = <1>; /* down */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ tinylcd35: tinylcd35@0{ -+ compatible = "neosec,tinylcd"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&tinylcd35_pins>, -+ <&tinylcd35_ts_pins>; -+ -+ spi-max-frequency = <48000000>; -+ rotate = <270>; -+ fps = <20>; -+ bgr; -+ buswidth = <8>; -+ reset-gpios = <&gpio 25 0>; -+ dc-gpios = <&gpio 24 0>; -+ led-gpios = <&gpio 18 1>; -+ debug = <0>; -+ -+ init = <0x10000B0 0x80 -+ 0x10000C0 0x0A 0x0A -+ 0x10000C1 0x01 0x01 -+ 0x10000C2 0x33 -+ 0x10000C5 0x00 0x42 0x80 -+ 0x10000B1 0xD0 0x11 -+ 0x10000B4 0x02 -+ 0x10000B6 0x00 0x22 0x3B -+ 0x10000B7 0x07 -+ 0x1000036 0x58 -+ 0x10000F0 0x36 0xA5 0xD3 -+ 0x10000E5 0x80 -+ 0x10000E5 0x01 -+ 0x10000B3 0x00 -+ 0x10000E5 0x00 -+ 0x10000F0 0x36 0xA5 0x53 -+ 0x10000E0 0x00 0x35 0x33 0x00 0x00 0x00 0x00 0x35 0x33 0x00 0x00 0x00 -+ 0x100003A 0x55 -+ 0x1000011 -+ 0x2000001 -+ 0x1000029>; -+ }; -+ -+ tinylcd35_ts: tinylcd35_ts@1 { -+ compatible = "ti,ads7846"; -+ reg = <1>; -+ status = "disabled"; -+ -+ spi-max-frequency = <2000000>; -+ interrupts = <5 2>; /* high-to-low edge triggered */ -+ interrupt-parent = <&gpio>; -+ pendown-gpio = <&gpio 5 0>; -+ ti,x-plate-ohms = /bits/ 16 <100>; -+ ti,pressure-max = /bits/ 16 <255>; -+ }; -+ }; -+ }; -+ -+ /* RTC */ -+ -+ fragment@5 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ pcf8563: pcf8563@51 { -+ compatible = "nxp,pcf8563"; -+ reg = <0x51>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&i2c1>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ ds1307: ds1307@68 { -+ compatible = "dallas,ds1307"; -+ reg = <0x68>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ /* -+ * Values for input event code is found under the -+ * 'Keys and buttons' heading in include/uapi/linux/input.h -+ */ -+ fragment@7 { -+ target-path = "/soc"; -+ __overlay__ { -+ keypad: keypad { -+ compatible = "gpio-keys"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&keypad_pins>; -+ status = "disabled"; -+ autorepeat; -+ -+ button@17 { -+ label = "GPIO KEY_UP"; -+ linux,code = <103>; -+ gpios = <&gpio 17 0>; -+ }; -+ button@22 { -+ label = "GPIO KEY_DOWN"; -+ linux,code = <108>; -+ gpios = <&gpio 22 0>; -+ }; -+ button@27 { -+ label = "GPIO KEY_LEFT"; -+ linux,code = <105>; -+ gpios = <&gpio 27 0>; -+ }; -+ button@23 { -+ label = "GPIO KEY_RIGHT"; -+ linux,code = <106>; -+ gpios = <&gpio 23 0>; -+ }; -+ button@4 { -+ label = "GPIO KEY_ENTER"; -+ linux,code = <28>; -+ gpios = <&gpio 4 0>; -+ }; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&tinylcd35>,"spi-max-frequency:0"; -+ rotate = <&tinylcd35>,"rotate:0"; -+ fps = <&tinylcd35>,"fps:0"; -+ debug = <&tinylcd35>,"debug:0"; -+ touch = <&tinylcd35_ts>,"status"; -+ touchgpio = <&tinylcd35_ts_pins>,"brcm,pins:0", -+ <&tinylcd35_ts>,"interrupts:0", -+ <&tinylcd35_ts>,"pendown-gpio:4"; -+ xohms = <&tinylcd35_ts>,"ti,x-plate-ohms;0"; -+ rtc-pcf = <0>,"=5"; -+ rtc-ds = <0>,"=6"; -+ keypad = <&keypad>,"status"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts b/arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts -new file mode 100644 -index 000000000000..e69188503ca3 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts -@@ -0,0 +1,44 @@ -+/* -+ * Device Tree overlay for the Infineon SLB9670 Trusted Platform Module add-on -+ * boards, which can be used as a secure key storage and hwrng. -+ * available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by pi3g. -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ slb9670: slb9670@1 { -+ compatible = "infineon,slb9670"; -+ reg = <1>; /* CE1 */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi-max-frequency = <32000000>; -+ status = "okay"; -+ }; -+ -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/uart0-overlay.dts b/arch/arm/boot/dts/overlays/uart0-overlay.dts -new file mode 100755 -index 000000000000..57ba7745d023 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/uart0-overlay.dts -@@ -0,0 +1,33 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&uart0>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ uart0_pins: uart0_pins { -+ brcm,pins = <14 15 14 15>; -+ brcm,function = <0 0 4 4>; /* alt0 */ -+ brcm,pull = <0 0 0 2>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ txd0_pin = <&uart0_pins>,"brcm,pins:8"; -+ rxd0_pin = <&uart0_pins>,"brcm,pins:12"; -+ pin_func = <&uart0_pins>,"brcm,function:8", -+ <&uart0_pins>,"brcm,function:12"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/uart1-overlay.dts b/arch/arm/boot/dts/overlays/uart1-overlay.dts -new file mode 100644 -index 000000000000..986d725a2652 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/uart1-overlay.dts -@@ -0,0 +1,38 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&uart1>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ uart1_pins: uart1_pins { -+ brcm,pins = <14 15>; -+ brcm,function = <2>; /* alt5 */ -+ brcm,pull = <0 2>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/chosen"; -+ __overlay__ { -+ bootargs = "8250.nr_uarts=1"; -+ }; -+ }; -+ -+ __overrides__ { -+ txd1_pin = <&uart1_pins>,"brcm,pins:0"; -+ rxd1_pin = <&uart1_pins>,"brcm,pins:4"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/uart2-overlay.dts b/arch/arm/boot/dts/overlays/uart2-overlay.dts -new file mode 100644 -index 000000000000..9face240aca1 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/uart2-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&uart2>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart2_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart2_pins>; -+ __dormant__ { -+ brcm,pins = <0 1 2 3>; -+ brcm,pull = <0 2 2 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ ctsrts = <0>,"=1"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/uart3-overlay.dts b/arch/arm/boot/dts/overlays/uart3-overlay.dts -new file mode 100644 -index 000000000000..ae9f9fe5ea1d ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/uart3-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&uart3>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart3_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart3_pins>; -+ __dormant__ { -+ brcm,pins = <4 5 6 7>; -+ brcm,pull = <0 2 2 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ ctsrts = <0>,"=1"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/uart4-overlay.dts b/arch/arm/boot/dts/overlays/uart4-overlay.dts -new file mode 100644 -index 000000000000..ac004ffbadbf ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/uart4-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&uart4>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart4_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart4_pins>; -+ __dormant__ { -+ brcm,pins = <8 9 10 11>; -+ brcm,pull = <0 2 2 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ ctsrts = <0>,"=1"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/uart5-overlay.dts b/arch/arm/boot/dts/overlays/uart5-overlay.dts -new file mode 100644 -index 000000000000..04eaf376effe ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/uart5-overlay.dts -@@ -0,0 +1,27 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2711"; -+ -+ fragment@0 { -+ target = <&uart5>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart5_pins>; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&uart5_pins>; -+ __dormant__ { -+ brcm,pins = <12 13 14 15>; -+ brcm,pull = <0 2 2 0>; -+ }; -+ }; -+ -+ __overrides__ { -+ ctsrts = <0>,"=1"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/udrc-overlay.dts b/arch/arm/boot/dts/overlays/udrc-overlay.dts -new file mode 100644 -index 000000000000..ae7c37996894 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/udrc-overlay.dts -@@ -0,0 +1,128 @@ -+#include <dt-bindings/clock/bcm2835.h> -+/* -+ * Device tree overlay for the Universal Digital Radio Controller -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ fragment@0 { -+ target = <&i2s>; -+ __overlay__ { -+ clocks = <&clocks BCM2835_CLOCK_PCM>; -+ clock-names = "pcm"; -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/"; -+ __overlay__ { -+ regulators { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ udrc0_ldoin: udrc0_ldoin { -+ compatible = "regulator-fixed"; -+ regulator-name = "ldoin"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ clocks = <&clocks BCM2835_CLOCK_VPU>; -+ clock-frequency = <400000>; -+ -+ tlv320aic32x4: tlv320aic32x4@18 { -+ compatible = "ti,tlv320aic32x4"; -+ #sound-dai-cells = <0>; -+ reg = <0x18>; -+ status = "okay"; -+ -+ clocks = <&clocks BCM2835_CLOCK_GP0>; -+ clock-names = "mclk"; -+ assigned-clocks = <&clocks BCM2835_CLOCK_GP0>; -+ assigned-clock-rates = <25000000>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gpclk0_pin &aic3204_reset>; -+ -+ reset-gpios = <&gpio 13 0>; -+ -+ iov-supply = <&udrc0_ldoin>; -+ ldoin-supply = <&udrc0_ldoin>; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ snd: __overlay__ { -+ compatible = "simple-audio-card"; -+ i2s-controller = <&i2s>; -+ status = "okay"; -+ -+ simple-audio-card,name = "udrc"; -+ simple-audio-card,format = "i2s"; -+ -+ simple-audio-card,bitclock-master = <&dailink0_master>; -+ simple-audio-card,frame-master = <&dailink0_master>; -+ -+ simple-audio-card,widgets = -+ "Line", "Line In", -+ "Line", "Line Out"; -+ -+ simple-audio-card,routing = -+ "IN1_R", "Line In", -+ "IN1_L", "Line In", -+ "CM_L", "Line In", -+ "CM_R", "Line In", -+ "Line Out", "LOR", -+ "Line Out", "LOL"; -+ -+ dailink0_master: simple-audio-card,cpu { -+ sound-dai = <&i2s>; -+ }; -+ -+ simple-audio-card,codec { -+ sound-dai = <&tlv320aic32x4>; -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&gpio>; -+ __overlay__ { -+ gpclk0_pin: gpclk0_pin { -+ brcm,pins = <4>; -+ brcm,function = <4>; -+ }; -+ -+ aic3204_reset: aic3204_reset { -+ brcm,pins = <13>; -+ brcm,function = <1>; -+ brcm,pull = <1>; -+ }; -+ -+ aic3204_gpio: aic3204_gpio { -+ brcm,pins = <26>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ alsaname = <&snd>, "simple-audio-card,name"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/upstream-overlay.dts b/arch/arm/boot/dts/overlays/upstream-overlay.dts -new file mode 100644 -index 000000000000..6112640837fc ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts -@@ -0,0 +1,131 @@ -+// redo: ovmerge -c vc4-kms-v3d-overlay.dts,cma-96 dwc2-overlay.dts,dr_mode=otg -+ -+/dts-v1/; -+/plugin/; -+ -+#include <dt-bindings/clock/bcm2835.h> -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ fragment@0 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=256M"; -+ }; -+ }; -+ fragment@1 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=192M"; -+ }; -+ }; -+ fragment@2 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=128M"; -+ }; -+ }; -+ fragment@3 { -+ target-path = "/chosen"; -+ __overlay__ { -+ bootargs = "cma=96M"; -+ }; -+ }; -+ fragment@4 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=64M"; -+ }; -+ }; -+ fragment@5 { -+ target = <&i2c2>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ fragment@6 { -+ target = <&fb>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ fragment@7 { -+ target = <&pixelvalve0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ fragment@8 { -+ target = <&pixelvalve1>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ fragment@9 { -+ target = <&pixelvalve2>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ fragment@10 { -+ target = <&hvs>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ fragment@11 { -+ target = <&hdmi>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ fragment@12 { -+ target = <&v3d>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ fragment@13 { -+ target = <&vc4>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ fragment@14 { -+ target = <&clocks>; -+ __overlay__ { -+ claim-clocks = <BCM2835_PLLD_DSI0 BCM2835_PLLD_DSI1 BCM2835_PLLH_AUX BCM2835_PLLH_PIX>; -+ }; -+ }; -+ fragment@15 { -+ target = <&vec>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ fragment@16 { -+ target = <&txp>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ fragment@17 { -+ target = <&hdmi>; -+ __dormant__ { -+ dmas; -+ }; -+ }; -+ fragment@18 { -+ target = <&usb>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ __overlay__ { -+ compatible = "brcm,bcm2835-usb"; -+ dr_mode = "otg"; -+ g-np-tx-fifo-size = <32>; -+ g-rx-fifo-size = <256>; -+ g-tx-fifo-size = <512 512 512 512 512 256 256>; -+ status = "okay"; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts -new file mode 100644 -index 000000000000..d9af97c8414f ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts -@@ -0,0 +1,81 @@ -+/* -+ * vc4-fkms-v3d-overlay.dts -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/chosen"; -+ __overlay__ { -+ bootargs = "cma=256M"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=192M"; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=128M"; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=96M"; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=64M"; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&fb>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&firmwarekms>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@7 { -+ target = <&v3d>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&vc4>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ __overrides__ { -+ cma-256 = <0>,"+0-1-2-3-4"; -+ cma-192 = <0>,"-0+1-2-3-4"; -+ cma-128 = <0>,"-0-1+2-3-4"; -+ cma-96 = <0>,"-0-1-2+3-4"; -+ cma-64 = <0>,"-0-1-2-3+4"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts b/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts -new file mode 100644 -index 000000000000..b03394844abd ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts -@@ -0,0 +1,43 @@ -+/* -+ * vc4-kms-v3d-overlay.dts -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+#include <dt-bindings/pinctrl/bcm2835.h> -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ panel: panel { -+ compatible = "ontat,yx700wv03", "simple-panel"; -+ -+ port { -+ panel_in: endpoint { -+ remote-endpoint = <&dpi_out>; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&dpi>; -+ __overlay__ { -+ status = "okay"; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&dpi_18bit_gpio0>; -+ -+ port { -+ dpi_out: endpoint@0 { -+ remote-endpoint = <&panel_in>; -+ }; -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -new file mode 100644 -index 000000000000..c5f687e8bcb9 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts -@@ -0,0 +1,152 @@ -+/* -+ * vc4-kms-v3d-overlay.dts -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+#include <dt-bindings/clock/bcm2835.h> -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/chosen"; -+ __overlay__ { -+ bootargs = "cma=256M"; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=192M"; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=128M"; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=96M"; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "/chosen"; -+ __dormant__ { -+ bootargs = "cma=64M"; -+ }; -+ }; -+ -+ fragment@5 { -+ target = <&i2c2>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@6 { -+ target = <&fb>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@7 { -+ target = <&pixelvalve0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&pixelvalve1>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@9 { -+ target = <&pixelvalve2>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@10 { -+ target = <&hvs>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@11 { -+ target = <&hdmi>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@12 { -+ target = <&v3d>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@13 { -+ target = <&vc4>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@14 { -+ target = <&clocks>; -+ __overlay__ { -+ claim-clocks = < -+ BCM2835_PLLD_DSI0 -+ BCM2835_PLLD_DSI1 -+ BCM2835_PLLH_AUX -+ BCM2835_PLLH_PIX -+ >; -+ }; -+ }; -+ -+ fragment@15 { -+ target = <&vec>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@16 { -+ target = <&txp>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@17 { -+ target = <&hdmi>; -+ __dormant__ { -+ dmas; -+ }; -+ }; -+ -+ __overrides__ { -+ cma-256 = <0>,"+0-1-2-3-4"; -+ cma-192 = <0>,"-0+1-2-3-4"; -+ cma-128 = <0>,"-0-1+2-3-4"; -+ cma-96 = <0>,"-0-1-2+3-4"; -+ cma-64 = <0>,"-0-1-2-3+4"; -+ audio = <0>,"!17"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/vga666-overlay.dts b/arch/arm/boot/dts/overlays/vga666-overlay.dts -new file mode 100644 -index 000000000000..a4968d180a5d ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/vga666-overlay.dts -@@ -0,0 +1,30 @@ -+/dts-v1/; -+/plugin/; -+ -+/{ -+ compatible = "brcm,bcm2835"; -+ -+ // There is no VGA driver module, but we need a platform device -+ // node (that doesn't already use pinctrl) to hang the pinctrl -+ // reference on - leds will do -+ -+ fragment@0 { -+ target = <&leds>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&vga666_pins>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ vga666_pins: vga666_pins { -+ brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 -+ 13 14 15 16 17 18 19 20 21>; -+ brcm,function = <6>; /* alt2 */ -+ brcm,pull = <0>; /* no pull */ -+ }; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts b/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts -new file mode 100644 -index 000000000000..f44e325bc1f2 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/w1-gpio-overlay.dts -@@ -0,0 +1,40 @@ -+// Definitions for w1-gpio module (without external pullup) -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ -+ w1: onewire@0 { -+ compatible = "w1-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&w1_pins>; -+ gpios = <&gpio 4 0>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ w1_pins: w1_pins@0 { -+ brcm,pins = <4>; -+ brcm,function = <0>; // in (initially) -+ brcm,pull = <0>; // off -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpiopin = <&w1>,"gpios:4", -+ <&w1>,"reg:0", -+ <&w1_pins>,"brcm,pins:0", -+ <&w1_pins>,"reg:0"; -+ pullup; // Silently ignore unneeded parameter -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts b/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts -new file mode 100644 -index 000000000000..953c6a1aeab9 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts -@@ -0,0 +1,42 @@ -+// Definitions for w1-gpio module (with external pullup) -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ -+ w1: onewire@0 { -+ compatible = "w1-gpio"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&w1_pins>; -+ gpios = <&gpio 4 0>, <&gpio 5 1>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&gpio>; -+ __overlay__ { -+ w1_pins: w1_pins@0 { -+ brcm,pins = <4 5>; -+ brcm,function = <0 1>; // in out -+ brcm,pull = <0 0>; // off off -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ gpiopin = <&w1>,"gpios:4", -+ <&w1>,"reg:0", -+ <&w1_pins>,"brcm,pins:0", -+ <&w1_pins>,"reg:0"; -+ extpullup = <&w1>,"gpios:16", -+ <&w1_pins>,"brcm,pins:4"; -+ pullup; // Silently ignore unneeded parameter -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/w5500-overlay.dts b/arch/arm/boot/dts/overlays/w5500-overlay.dts -new file mode 100644 -index 000000000000..4d3e66296753 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/w5500-overlay.dts -@@ -0,0 +1,63 @@ -+// Overlay for the Wiznet w5500 Ethernet Controller -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev1>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "okay"; -+ -+ eth1: w5500@0{ -+ compatible = "wiznet,w5500"; -+ reg = <0>; /* CE0 */ -+ pinctrl-names = "default"; -+ pinctrl-0 = <ð1_pins>; -+ interrupt-parent = <&gpio>; -+ interrupts = <25 0x8>; -+ spi-max-frequency = <30000000>; -+// local-mac-address = [aa bb cc dd ee ff]; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ eth1_pins: eth1_pins { -+ brcm,pins = <25>; -+ brcm,function = <0>; /* in */ -+ brcm,pull = <0>; /* none */ -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ int_pin = <ð1>, "interrupts:0", -+ <ð1_pins>, "brcm,pins:0"; -+ speed = <ð1>, "spi-max-frequency:0"; -+ cs = <ð1>, "reg:0", -+ <0>, "!0=1"; -+ }; -+}; -diff --git a/arch/arm/boot/dts/overlays/wittypi-overlay.dts b/arch/arm/boot/dts/overlays/wittypi-overlay.dts -new file mode 100644 -index 000000000000..71ce806186de ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/wittypi-overlay.dts -@@ -0,0 +1,44 @@ -+/* -+ * Device Tree overlay for Witty Pi extension board by UUGear -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&leds>; -+ __overlay__ { -+ compatible = "gpio-leds"; -+ wittypi_led: wittypi_led { -+ label = "wittypi_led"; -+ linux,default-trigger = "default-on"; -+ gpios = <&gpio 17 0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rtc: ds1337@68 { -+ compatible = "dallas,ds1337"; -+ reg = <0x68>; -+ wakeup-source; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ led_gpio = <&wittypi_led>,"gpios:4"; -+ led_trigger = <&wittypi_led>,"linux,default-trigger"; -+ }; -+ -+}; -diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile -index f19b762c008d..fb5542a7a124 100644 ---- a/arch/arm64/boot/dts/Makefile -+++ b/arch/arm64/boot/dts/Makefile -@@ -28,3 +28,5 @@ subdir-y += synaptics - subdir-y += ti - subdir-y += xilinx - subdir-y += zte -+ -+subdir-y += overlays -diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile -index d1d31ccad758..1004a9fb8bf4 100644 ---- a/arch/arm64/boot/dts/broadcom/Makefile -+++ b/arch/arm64/boot/dts/broadcom/Makefile -@@ -3,6 +3,17 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-a-plus.dtb \ - bcm2837-rpi-3-b.dtb \ - bcm2837-rpi-3-b-plus.dtb \ - bcm2837-rpi-cm3-io3.dtb -+dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb -+dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb -+dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb -+dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb -+dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-cm3.dtb -+dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-cm3.dtb - - subdir-y += northstar2 - subdir-y += stingray -+ -+# Enable fixups to support overlays on BCM2835 platforms -+ifeq ($(CONFIG_ARCH_BCM2835),y) -+ DTC_FLAGS ?= -@ -+endif -diff --git a/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts -new file mode 100644 -index 000000000000..d9242ff77079 ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts -@@ -0,0 +1,3 @@ -+#define RPI364 -+ -+#include "../../../../arm/boot/dts/bcm2710-rpi-3-b-plus.dts" -diff --git a/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts -new file mode 100644 -index 000000000000..deb33441da95 ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts -@@ -0,0 +1,3 @@ -+#define RPI364 -+ -+#include "../../../../arm/boot/dts/bcm2710-rpi-3-b.dts" -diff --git a/arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts -new file mode 100644 -index 000000000000..1c2560017c02 ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts -@@ -0,0 +1,3 @@ -+#define RPI364 -+ -+#include "../../../../arm/boot/dts/bcm2710-rpi-cm3.dts" -diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts -new file mode 100644 -index 000000000000..1fd86f81f542 ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts -@@ -0,0 +1,3 @@ -+#define RPI364 -+ -+#include "../../../../arm/boot/dts/bcm2711-rpi-4-b.dts" -diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi -new file mode 120000 -index 000000000000..e5c400284467 ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi -@@ -0,0 +1 @@ -+../../../../arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi -\ No newline at end of file -diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi -new file mode 120000 -index 000000000000..fc4c05bbe7fd ---- /dev/null -+++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi -@@ -0,0 +1 @@ -+../../../../arm/boot/dts/bcm283x-rpi-lan7515.dtsi -\ No newline at end of file -diff --git a/arch/arm64/boot/dts/overlays b/arch/arm64/boot/dts/overlays -new file mode 120000 -index 000000000000..ded08646b6f6 ---- /dev/null -+++ b/arch/arm64/boot/dts/overlays -@@ -0,0 +1 @@ -+../../../arm/boot/dts/overlays -\ No newline at end of file -diff --git a/scripts/Makefile.dtbinst b/scripts/Makefile.dtbinst -index 7301ab5e2e06..da2af04a6d7d 100644 ---- a/scripts/Makefile.dtbinst -+++ b/scripts/Makefile.dtbinst -@@ -20,6 +20,7 @@ include scripts/Kbuild.include - include $(src)/Makefile - - dtbinst-files := $(sort $(dtb-y) $(if $(CONFIG_OF_ALL_DTBS), $(dtb-))) -+dtboinst-files := $(sort $(dtbo-y) $(if $(CONFIG_OF_ALL_DTBS), $(dtb-))) - dtbinst-dirs := $(subdir-y) $(subdir-m) - - # Helper targets for Installing DTBs into the boot directory -@@ -31,10 +32,13 @@ install-dir = $(patsubst $(dtbinst_root)%,$(INSTALL_DTBS_PATH)%,$(obj)) - $(dtbinst-files): %.dtb: $(obj)/%.dtb - $(call cmd,dtb_install,$(install-dir)) - -+$(dtboinst-files): %.dtbo: $(obj)/%.dtbo -+ $(call cmd,dtb_install,$(install-dir)) -+ - $(dtbinst-dirs): - $(Q)$(MAKE) $(dtbinst)=$(obj)/$@ - --PHONY += $(dtbinst-files) $(dtbinst-dirs) --__dtbs_install: $(dtbinst-files) $(dtbinst-dirs) -+PHONY += $(dtbinst-files) $(dtboinst-files) $(dtbinst-dirs) -+__dtbs_install: $(dtbinst-files) $(dtboinst-files) $(dtbinst-dirs) - - .PHONY: $(PHONY) -diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib -index 179d55af5852..2cfce19f9f73 100644 ---- a/scripts/Makefile.lib -+++ b/scripts/Makefile.lib -@@ -254,6 +254,7 @@ DTC ?= $(objtree)/scripts/dtc/dtc - ifeq ($(findstring 1,$(KBUILD_EXTRA_WARN)),) - DTC_FLAGS += -Wno-unit_address_vs_reg \ - -Wno-unit_address_format \ -+ -Wno-gpios_property \ - -Wno-avoid_unnecessary_addr_size \ - -Wno-alias_paths \ - -Wno-graph_child_address \ -@@ -313,6 +314,18 @@ endef - $(obj)/%.dt.yaml: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE - $(call if_changed_rule,dtc_dt_yaml) - -+quiet_cmd_dtco = DTCO $@ -+cmd_dtco = mkdir -p $(dir ${dtc-tmp}) ; \ -+ $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ -+ $(DTC) -@ -H epapr -O dtb -o $@ -b 0 \ -+ -i $(dir $<) $(DTC_FLAGS) \ -+ -Wno-interrupts_property \ -+ -d $(depfile).dtc.tmp $(dtc-tmp) ; \ -+ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) -+ -+$(obj)/%.dtbo: $(src)/%-overlay.dts FORCE -+ $(call if_changed_dep,dtco) -+ - dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) - - # Bzip2 --- -2.20.1 - |