diff options
Diffstat (limited to 'target/linux/bcm27xx/patches-5.10/950-0660-overlays-Make-i2c-rtc-and-i2c-rtc-gpio-share-RTCs.patch')
| -rw-r--r-- | target/linux/bcm27xx/patches-5.10/950-0660-overlays-Make-i2c-rtc-and-i2c-rtc-gpio-share-RTCs.patch | 918 |
1 files changed, 918 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.10/950-0660-overlays-Make-i2c-rtc-and-i2c-rtc-gpio-share-RTCs.patch b/target/linux/bcm27xx/patches-5.10/950-0660-overlays-Make-i2c-rtc-and-i2c-rtc-gpio-share-RTCs.patch new file mode 100644 index 0000000000..673729b124 --- /dev/null +++ b/target/linux/bcm27xx/patches-5.10/950-0660-overlays-Make-i2c-rtc-and-i2c-rtc-gpio-share-RTCs.patch @@ -0,0 +1,918 @@ +From 299e9ffda004d3f5f722ebbd04be0250a618203a Mon Sep 17 00:00:00 2001 +From: Phil Elwell <phil@raspberrypi.com> +Date: Wed, 30 Jun 2021 17:03:00 +0100 +Subject: [PATCH] overlays: Make i2c-rtc and i2c-rtc-gpio share RTCs + +Lift the set of RTCs out of i2c-rtc and i2c-rtc-gpio to update +i2c-rtc-gpio and to reduce duplication. + +Signed-off-by: Phil Elwell <phil@raspberrypi.com> +--- + arch/arm/boot/dts/overlays/README | 10 + + .../arm/boot/dts/overlays/i2c-rtc-common.dtsi | 290 ++++++++++++++++++ + .../dts/overlays/i2c-rtc-gpio-overlay.dts | 249 +-------------- + .../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 287 +---------------- + 4 files changed, 309 insertions(+), 527 deletions(-) + create mode 100644 arch/arm/boot/dts/overlays/i2c-rtc-common.dtsi + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1445,6 +1445,8 @@ Params: abx80x Select o + + ds1339 Select the DS1339 device + ++ ds1340 Select the DS1340 device ++ + ds3231 Select the DS3231 device + + m41t62 Select the M41T62 device +@@ -1457,14 +1459,22 @@ Params: abx80x Select o + + pcf2129 Select the PCF2129 device + ++ pcf85063 Select the PCF85063 device ++ ++ pcf85063a Select the PCF85063A device ++ + pcf8523 Select the PCF8523 device + ++ pcf85363 Select the PCF85363 device ++ + pcf8563 Select the PCF8563 device + + rv1805 Select the Micro Crystal RV1805 device + + rv3028 Select the Micro Crystal RV3028 device + ++ sd3078 Select the ZXW Shenzhen whwave SD3078 device ++ + addr Sets the address for the RTC. Note that the + device must be configured to use the specified + address. +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-common.dtsi +@@ -0,0 +1,290 @@ ++// Definitions for several I2C based Real Time Clocks ++ ++/ { ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ abx80x: abx80x@69 { ++ compatible = "abracon,abx80x"; ++ reg = <0x69>; ++ abracon,tc-diode = "standard"; ++ abracon,tc-resistor = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ds1307: ds1307@68 { ++ compatible = "dallas,ds1307"; ++ reg = <0x68>; ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ds1339: ds1339@68 { ++ compatible = "dallas,ds1339"; ++ trickle-resistor-ohms = <0>; ++ reg = <0x68>; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ds3231: ds3231@68 { ++ compatible = "maxim,ds3231"; ++ reg = <0x68>; ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp7940x: mcp7940x@6f { ++ compatible = "microchip,mcp7940x"; ++ reg = <0x6f>; ++ }; ++ }; ++ }; ++ ++ fragment@5 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ mcp7941x: mcp7941x@6f { ++ compatible = "microchip,mcp7941x"; ++ reg = <0x6f>; ++ }; ++ }; ++ }; ++ ++ fragment@6 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pcf2127@51 { ++ compatible = "nxp,pcf2127"; ++ reg = <0x51>; ++ }; ++ }; ++ }; ++ ++ fragment@7 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pcf8523: pcf8523@68 { ++ compatible = "nxp,pcf8523"; ++ reg = <0x68>; ++ }; ++ }; ++ }; ++ ++ fragment@8 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pcf8563: pcf8563@51 { ++ compatible = "nxp,pcf8563"; ++ reg = <0x51>; ++ }; ++ }; ++ }; ++ ++ fragment@9 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ m41t62: m41t62@68 { ++ compatible = "st,m41t62"; ++ reg = <0x68>; ++ }; ++ }; ++ }; ++ ++ fragment@10 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ rv3028: rv3028@52 { ++ compatible = "microcrystal,rv3028"; ++ reg = <0x52>; ++ }; ++ }; ++ }; ++ ++ fragment@11 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pcf2129@51 { ++ compatible = "nxp,pcf2129"; ++ reg = <0x51>; ++ }; ++ }; ++ }; ++ ++ fragment@12 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pcf85363@51 { ++ compatible = "nxp,pcf85363"; ++ reg = <0x51>; ++ }; ++ }; ++ }; ++ ++ fragment@13 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ rv1805: rv1805@69 { ++ compatible = "microcrystal,rv1805"; ++ reg = <0x69>; ++ abracon,tc-diode = "standard"; ++ abracon,tc-resistor = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@14 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ sd3078: sd3078@32 { ++ compatible = "whwave,sd3078"; ++ reg = <0x32>; ++ }; ++ }; ++ }; ++ ++ fragment@15 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pcf85063@51 { ++ compatible = "nxp,pcf85063"; ++ reg = <0x51>; ++ }; ++ }; ++ }; ++ ++ fragment@16 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pcf85063a@51 { ++ compatible = "nxp,pcf85063a"; ++ reg = <0x51>; ++ }; ++ }; ++ }; ++ ++ fragment@17 { ++ target = <&i2cbus>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ds1340: ds1340@68 { ++ compatible = "dallas,ds1340"; ++ trickle-resistor-ohms = <0>; ++ reg = <0x68>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ abx80x = <0>,"+0"; ++ ds1307 = <0>,"+1"; ++ ds1339 = <0>,"+2"; ++ ds1340 = <0>,"+17"; ++ ds3231 = <0>,"+3"; ++ mcp7940x = <0>,"+4"; ++ mcp7941x = <0>,"+5"; ++ pcf2127 = <0>,"+6"; ++ pcf8523 = <0>,"+7"; ++ pcf8563 = <0>,"+8"; ++ m41t62 = <0>,"+9"; ++ rv3028 = <0>,"+10"; ++ pcf2129 = <0>,"+11"; ++ pcf85363 = <0>,"+12"; ++ rv1805 = <0>,"+13"; ++ sd3078 = <0>,"+14"; ++ pcf85063 = <0>,"+15"; ++ pcf85063a = <0>,"+16"; ++ ++ addr = <&abx80x>, "reg:0", ++ <&ds1307>, "reg:0", ++ <&ds1339>, "reg:0", ++ <&ds3231>, "reg:0", ++ <&mcp7940x>, "reg:0", ++ <&mcp7941x>, "reg:0", ++ <&pcf8523>, "reg:0", ++ <&pcf8563>, "reg:0", ++ <&m41t62>, "reg:0", ++ <&rv1805>, "reg:0"; ++ trickle-diode-type = <&abx80x>,"abracon,tc-diode", ++ <&rv1805>,"abracon,tc-diode"; ++ trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", ++ <&ds1340>,"trickle-resistor-ohms:0", ++ <&abx80x>,"abracon,tc-resistor:0", ++ <&rv3028>,"trickle-resistor-ohms:0", ++ <&rv1805>,"abracon,tc-resistor:0"; ++ backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0"; ++ wakeup-source = <&ds1339>,"wakeup-source?", ++ <&ds3231>,"wakeup-source?", ++ <&mcp7940x>,"wakeup-source?", ++ <&mcp7941x>,"wakeup-source?", ++ <&m41t62>,"wakeup-source?"; ++ }; ++}; +--- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts +@@ -5,13 +5,13 @@ + + #include <dt-bindings/gpio/gpio.h> + +-/ { +- compatible = "brcm,bcm2835"; ++#include "i2c-rtc-common.dtsi" + +- fragment@0 { ++/ { ++ fragment@100 { + target-path = "/"; + __overlay__ { +- i2c_gpio: i2c-gpio-rtc@0 { ++ i2cbus: i2c-gpio-rtc@0 { + compatible = "i2c-gpio"; + gpios = <&gpio 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */ + &gpio 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */ +@@ -23,244 +23,9 @@ + }; + }; + +- fragment@1 { +- target = <&i2c_gpio>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- abx80x: abx80x@69 { +- compatible = "abracon,abx80x"; +- reg = <0x69>; +- abracon,tc-diode = "standard"; +- abracon,tc-resistor = <0>; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@2 { +- target = <&i2c_gpio>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- ds1307: ds1307@68 { +- compatible = "dallas,ds1307"; +- reg = <0x68>; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@3 { +- target = <&i2c_gpio>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- ds1339: ds1339@68 { +- compatible = "dallas,ds1339"; +- trickle-resistor-ohms = <0>; +- reg = <0x68>; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@4 { +- target = <&i2c_gpio>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- ds3231: ds3231@68 { +- compatible = "maxim,ds3231"; +- reg = <0x68>; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@5 { +- target = <&i2c_gpio>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- mcp7940x: mcp7940x@6f { +- compatible = "microchip,mcp7940x"; +- reg = <0x6f>; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@6 { +- target = <&i2c_gpio>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- mcp7941x: mcp7941x@6f { +- compatible = "microchip,mcp7941x"; +- reg = <0x6f>; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@7 { +- target = <&i2c_gpio>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- pcf2127@51 { +- compatible = "nxp,pcf2127"; +- reg = <0x51>; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@8 { +- target = <&i2c_gpio>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- pcf8523: pcf8523@68 { +- compatible = "nxp,pcf8523"; +- reg = <0x68>; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@9 { +- target = <&i2c_gpio>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- pcf8563: pcf8563@51 { +- compatible = "nxp,pcf8563"; +- reg = <0x51>; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@10 { +- target = <&i2c_arm>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- m41t62: m41t62@68 { +- compatible = "st,m41t62"; +- reg = <0x68>; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@11 { +- target = <&i2c_gpio>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- rv3028: rv3028@52 { +- compatible = "microcrystal,rv3028"; +- reg = <0x52>; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@12 { +- target = <&i2c_gpio>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- pcf2129@51 { +- compatible = "nxp,pcf2129"; +- reg = <0x51>; +- status = "okay"; +- }; +- }; +- }; +- +- fragment@13 { +- target = <&i2c_gpio>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- status = "okay"; +- +- rv1805: rv1805@69 { +- compatible = "microcrystal,rv1805"; +- reg = <0x69>; +- abracon,tc-diode = "standard"; +- abracon,tc-resistor = <0>; +- status = "okay"; +- }; +- }; +- }; +- + __overrides__ { +- abx80x = <0>,"+1"; +- ds1307 = <0>,"+2"; +- ds1339 = <0>,"+3"; +- ds3231 = <0>,"+4"; +- mcp7940x = <0>,"+5"; +- mcp7941x = <0>,"+6"; +- pcf2127 = <0>,"+7"; +- pcf8523 = <0>,"+8"; +- pcf8563 = <0>,"+9"; +- m41t62 = <0>,"+10"; +- rv3028 = <0>,"+11"; +- pcf2129 = <0>,"+12"; +- rv1805 = <0>,"+13"; +- +- addr = <&abx80x>, "reg:0", +- <&ds1307>, "reg:0", +- <&ds1339>, "reg:0", +- <&ds3231>, "reg:0", +- <&mcp7940x>, "reg:0", +- <&mcp7941x>, "reg:0", +- <&pcf8523>, "reg:0", +- <&pcf8563>, "reg:0", +- <&m41t62>, "reg:0", +- <&rv1805>, "reg:0"; +- trickle-diode-type = <&abx80x>,"abracon,tc-diode", +- <&rv1805>,"abracon,tc-diode"; +- trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", +- <&abx80x>,"abracon,tc-resistor:0", +- <&rv3028>,"trickle-resistor-ohms:0", +- <&rv1805>,"abracon,tc-resistor:0"; +- backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0"; +- wakeup-source = <&ds1339>,"wakeup-source?", +- <&ds3231>,"wakeup-source?", +- <&mcp7940x>,"wakeup-source?", +- <&mcp7941x>,"wakeup-source?"; +- i2c_gpio_sda = <&i2c_gpio>,"gpios:4"; +- i2c_gpio_scl = <&i2c_gpio>,"gpios:16"; +- i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0"; ++ i2c_gpio_sda = <&i2cbus>,"gpios:4"; ++ i2c_gpio_scl = <&i2cbus>,"gpios:16"; ++ i2c_gpio_delay_us = <&i2cbus>,"i2c-gpio,delay-us:0"; + }; + }; +--- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts +@@ -2,249 +2,9 @@ + /dts-v1/; + /plugin/; + +-/ { +- compatible = "brcm,bcm2835"; +- +- fragment@0 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- abx80x: abx80x@69 { +- compatible = "abracon,abx80x"; +- reg = <0x69>; +- abracon,tc-diode = "standard"; +- abracon,tc-resistor = <0>; +- }; +- }; +- }; +- +- fragment@1 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- ds1307: ds1307@68 { +- compatible = "dallas,ds1307"; +- reg = <0x68>; +- }; +- }; +- }; +- +- fragment@2 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- ds1339: ds1339@68 { +- compatible = "dallas,ds1339"; +- trickle-resistor-ohms = <0>; +- reg = <0x68>; +- }; +- }; +- }; +- +- fragment@3 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- ds3231: ds3231@68 { +- compatible = "maxim,ds3231"; +- reg = <0x68>; +- }; +- }; +- }; +- +- fragment@4 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- mcp7940x: mcp7940x@6f { +- compatible = "microchip,mcp7940x"; +- reg = <0x6f>; +- }; +- }; +- }; +- +- fragment@5 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- mcp7941x: mcp7941x@6f { +- compatible = "microchip,mcp7941x"; +- reg = <0x6f>; +- }; +- }; +- }; +- +- fragment@6 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- pcf2127@51 { +- compatible = "nxp,pcf2127"; +- reg = <0x51>; +- }; +- }; +- }; +- +- fragment@7 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- pcf8523: pcf8523@68 { +- compatible = "nxp,pcf8523"; +- reg = <0x68>; +- }; +- }; +- }; +- +- fragment@8 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- pcf8563: pcf8563@51 { +- compatible = "nxp,pcf8563"; +- reg = <0x51>; +- }; +- }; +- }; +- +- fragment@9 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- m41t62: m41t62@68 { +- compatible = "st,m41t62"; +- reg = <0x68>; +- }; +- }; +- }; +- +- fragment@10 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- rv3028: rv3028@52 { +- compatible = "microcrystal,rv3028"; +- reg = <0x52>; +- }; +- }; +- }; +- +- fragment@11 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- pcf2129@51 { +- compatible = "nxp,pcf2129"; +- reg = <0x51>; +- }; +- }; +- }; +- +- fragment@12 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- pcf85363@51 { +- compatible = "nxp,pcf85363"; +- reg = <0x51>; +- }; +- }; +- }; +- +- fragment@13 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- rv1805: rv1805@69 { +- compatible = "microcrystal,rv1805"; +- reg = <0x69>; +- abracon,tc-diode = "standard"; +- abracon,tc-resistor = <0>; +- }; +- }; +- }; +- +- fragment@14 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- sd3078: sd3078@32 { +- compatible = "whwave,sd3078"; +- reg = <0x32>; +- }; +- }; +- }; +- +- fragment@15 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- pcf85063@51 { +- compatible = "nxp,pcf85063"; +- reg = <0x51>; +- }; +- }; +- }; +- +- fragment@16 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- pcf85063a@51 { +- compatible = "nxp,pcf85063a"; +- reg = <0x51>; +- }; +- }; +- }; +- +- fragment@17 { +- target = <&i2cbus>; +- __dormant__ { +- #address-cells = <1>; +- #size-cells = <0>; +- +- ds1340: ds1340@68 { +- compatible = "dallas,ds1340"; +- trickle-resistor-ohms = <0>; +- reg = <0x68>; +- }; +- }; +- }; ++#include "i2c-rtc-common.dtsi" + ++/ { + frag100: fragment@100 { + target = <&i2c_arm>; + i2cbus: __overlay__ { +@@ -267,51 +27,8 @@ + }; + + __overrides__ { +- abx80x = <0>,"+0"; +- ds1307 = <0>,"+1"; +- ds1339 = <0>,"+2"; +- ds1340 = <0>,"+17"; +- ds3231 = <0>,"+3"; +- mcp7940x = <0>,"+4"; +- mcp7941x = <0>,"+5"; +- pcf2127 = <0>,"+6"; +- pcf8523 = <0>,"+7"; +- pcf8563 = <0>,"+8"; +- m41t62 = <0>,"+9"; +- rv3028 = <0>,"+10"; +- pcf2129 = <0>,"+11"; +- pcf85363 = <0>,"+12"; +- rv1805 = <0>,"+13"; +- sd3078 = <0>,"+14"; +- pcf85063 = <0>,"+15"; +- pcf85063a = <0>,"+16"; +- + i2c0 = <&frag100>, "target:0=",<&i2c0>; + i2c_csi_dsi = <&frag100>, "target:0=",<&i2c_csi_dsi>, + <0>,"+101+102"; +- +- addr = <&abx80x>, "reg:0", +- <&ds1307>, "reg:0", +- <&ds1339>, "reg:0", +- <&ds3231>, "reg:0", +- <&mcp7940x>, "reg:0", +- <&mcp7941x>, "reg:0", +- <&pcf8523>, "reg:0", +- <&pcf8563>, "reg:0", +- <&m41t62>, "reg:0", +- <&rv1805>, "reg:0"; +- trickle-diode-type = <&abx80x>,"abracon,tc-diode", +- <&rv1805>,"abracon,tc-diode"; +- trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", +- <&ds1340>,"trickle-resistor-ohms:0", +- <&abx80x>,"abracon,tc-resistor:0", +- <&rv3028>,"trickle-resistor-ohms:0", +- <&rv1805>,"abracon,tc-resistor:0"; +- backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0"; +- wakeup-source = <&ds1339>,"wakeup-source?", +- <&ds3231>,"wakeup-source?", +- <&mcp7940x>,"wakeup-source?", +- <&mcp7941x>,"wakeup-source?", +- <&m41t62>,"wakeup-source?"; + }; + }; |