aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-5.10/950-0026-Update-vfpmodule.c.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-5.10/950-0026-Update-vfpmodule.c.patch')
-rw-r--r--target/linux/bcm27xx/patches-5.10/950-0026-Update-vfpmodule.c.patch137
1 files changed, 137 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-5.10/950-0026-Update-vfpmodule.c.patch b/target/linux/bcm27xx/patches-5.10/950-0026-Update-vfpmodule.c.patch
new file mode 100644
index 0000000000..51bf29b14c
--- /dev/null
+++ b/target/linux/bcm27xx/patches-5.10/950-0026-Update-vfpmodule.c.patch
@@ -0,0 +1,137 @@
+From 55f18cc01fc9c93999ea935f7d869d136f5204ed Mon Sep 17 00:00:00 2001
+From: Claggy3 <stephen.maclagan@hotmail.com>
+Date: Sat, 11 Feb 2017 14:00:30 +0000
+Subject: [PATCH] Update vfpmodule.c
+
+Christopher Alexander Tobias Schulze - May 2, 2015, 11:57 a.m.
+This patch fixes a problem with VFP state save and restore related
+to exception handling (panic with message "BUG: unsupported FP
+instruction in kernel mode") present on VFP11 floating point units
+(as used with ARM1176JZF-S CPUs, e.g. on first generation Raspberry
+Pi boards). This patch was developed and discussed on
+
+ https://github.com/raspberrypi/linux/issues/859
+
+A precondition to see the crashes is that floating point exception
+traps are enabled. In this case, the VFP11 might determine that a FPU
+operation needs to trap at a point in time when it is not possible to
+signal this to the ARM11 core any more. The VFP11 will then set the
+FPEXC.EX bit and store the trapped opcode in FPINST. (In some cases,
+a second opcode might have been accepted by the VFP11 before the
+exception was detected and could be reported to the ARM11 - in this
+case, the VFP11 also sets FPEXC.FP2V and stores the second opcode in
+FPINST2.)
+
+If FPEXC.EX is set, the VFP11 will "bounce" the next FPU opcode issued
+by the ARM11 CPU, which will be seen by the ARM11 as an undefined opcode
+trap. The VFP support code examines the FPEXC.EX and FPEXC.FP2V bits
+to decide what actions to take, i.e., whether to emulate the opcodes
+found in FPINST and FPINST2, and whether to retry the bounced instruction.
+
+If a user space application has left the VFP11 in this "pending trap"
+state, the next FPU opcode issued to the VFP11 might actually be the
+VSTMIA operation vfp_save_state() uses to store the FPU registers
+to memory (in our test cases, when building the signal stack frame).
+In this case, the kernel crashes as described above.
+
+This patch fixes the problem by making sure that vfp_save_state() is
+always entered with FPEXC.EX cleared. (The current value of FPEXC has
+already been saved, so this does not corrupt the context. Clearing
+FPEXC.EX has no effects on FPINST or FPINST2. Also note that many
+callers already modify FPEXC by setting FPEXC.EN before invoking
+vfp_save_state().)
+
+This patch also addresses a second problem related to FPEXC.EX: After
+returning from signal handling, the kernel reloads the VFP context
+from the user mode stack. However, the current code explicitly clears
+both FPEXC.EX and FPEXC.FP2V during reload. As VFP11 requires these
+bits to be preserved, this patch disables clearing them for VFP
+implementations belonging to architecture 1. There should be no
+negative side effects: the user can set both bits by executing FPU
+opcodes anyway, and while user code may now place arbitrary values
+into FPINST and FPINST2 (e.g., non-VFP ARM opcodes) the VFP support
+code knows which instructions can be emulated, and rejects other
+opcodes with "unhandled bounce" messages, so there should be no
+security impact from allowing reloading FPEXC.EX and FPEXC.FP2V.
+
+Signed-off-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net>
+---
+ arch/arm/vfp/vfpmodule.c | 25 +++++++++++++++++++------
+ 1 file changed, 19 insertions(+), 6 deletions(-)
+
+--- a/arch/arm/vfp/vfpmodule.c
++++ b/arch/arm/vfp/vfpmodule.c
+@@ -176,8 +176,11 @@ static int vfp_notifier(struct notifier_
+ * case the thread migrates to a different CPU. The
+ * restoring is done lazily.
+ */
+- if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu])
++ if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) {
++ /* vfp_save_state oopses on VFP11 if EX bit set */
++ fmxr(FPEXC, fpexc & ~FPEXC_EX);
+ vfp_save_state(vfp_current_hw_state[cpu], fpexc);
++ }
+ #endif
+
+ /*
+@@ -454,13 +457,16 @@ static int vfp_pm_suspend(void)
+ /* if vfp is on, then save state for resumption */
+ if (fpexc & FPEXC_EN) {
+ pr_debug("%s: saving vfp state\n", __func__);
++ /* vfp_save_state oopses on VFP11 if EX bit set */
++ fmxr(FPEXC, fpexc & ~FPEXC_EX);
+ vfp_save_state(&ti->vfpstate, fpexc);
+
+ /* disable, just in case */
+ fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
+ } else if (vfp_current_hw_state[ti->cpu]) {
+ #ifndef CONFIG_SMP
+- fmxr(FPEXC, fpexc | FPEXC_EN);
++ /* vfp_save_state oopses on VFP11 if EX bit set */
++ fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN);
+ vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc);
+ fmxr(FPEXC, fpexc);
+ #endif
+@@ -523,7 +529,8 @@ void vfp_sync_hwstate(struct thread_info
+ /*
+ * Save the last VFP state on this CPU.
+ */
+- fmxr(FPEXC, fpexc | FPEXC_EN);
++ /* vfp_save_state oopses on VFP11 if EX bit set */
++ fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN);
+ vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN);
+ fmxr(FPEXC, fpexc);
+ }
+@@ -589,6 +596,7 @@ int vfp_restore_user_hwstate(struct user
+ struct thread_info *thread = current_thread_info();
+ struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+ unsigned long fpexc;
++ u32 fpsid = fmrx(FPSID);
+
+ /* Disable VFP to avoid corrupting the new thread state. */
+ vfp_flush_hwstate(thread);
+@@ -611,8 +619,12 @@ int vfp_restore_user_hwstate(struct user
+ /* Ensure the VFP is enabled. */
+ fpexc |= FPEXC_EN;
+
+- /* Ensure FPINST2 is invalid and the exception flag is cleared. */
+- fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
++ /* Mask FPXEC_EX and FPEXC_FP2V if not required by VFP arch */
++ if ((fpsid & FPSID_ARCH_MASK) != (1 << FPSID_ARCH_BIT)) {
++ /* Ensure FPINST2 is invalid and the exception flag is cleared. */
++ fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
++ }
++
+ hwstate->fpexc = fpexc;
+
+ hwstate->fpinst = ufp_exc->fpinst;
+@@ -726,7 +738,8 @@ void kernel_neon_begin(void)
+ cpu = get_cpu();
+
+ fpexc = fmrx(FPEXC) | FPEXC_EN;
+- fmxr(FPEXC, fpexc);
++ /* vfp_save_state oopses on VFP11 if EX bit set */
++ fmxr(FPEXC, fpexc & ~FPEXC_EX);
+
+ /*
+ * Save the userland NEON/VFP state. Under UP,