aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-4.19/950-0805-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-4.19/950-0805-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch')
-rw-r--r--target/linux/bcm27xx/patches-4.19/950-0805-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch146
1 files changed, 0 insertions, 146 deletions
diff --git a/target/linux/bcm27xx/patches-4.19/950-0805-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch b/target/linux/bcm27xx/patches-4.19/950-0805-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch
deleted file mode 100644
index 7a0b8c5cb6..0000000000
--- a/target/linux/bcm27xx/patches-4.19/950-0805-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch
+++ /dev/null
@@ -1,146 +0,0 @@
-From 8aa8fd89094952e3201b927fb846ba61b30cab6b Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Wed, 29 Jan 2020 11:29:06 +0000
-Subject: [PATCH] ARM: dts: Remove bcm2838-rpi-4-b.dts
-
-Upstream are not going to use the bcm2838 identifier, so begin the
-cleanup by removing the suggested upstream Pi 4 .dts file.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/Makefile | 1 -
- arch/arm/boot/dts/bcm2838-rpi-4-b.dts | 118 --------------------------
- 2 files changed, 119 deletions(-)
- delete mode 100644 arch/arm/boot/dts/bcm2838-rpi-4-b.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -95,7 +95,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
- bcm2836-rpi-2-b.dtb \
- bcm2837-rpi-3-b.dtb \
- bcm2837-rpi-3-b-plus.dtb \
-- bcm2838-rpi-4-b.dtb \
- bcm2835-rpi-zero.dtb \
- bcm2835-rpi-zero-w.dtb
- dtb-$(CONFIG_ARCH_BCM_5301X) += \
---- a/arch/arm/boot/dts/bcm2838-rpi-4-b.dts
-+++ /dev/null
-@@ -1,118 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0
--/dts-v1/;
--#include "bcm2838.dtsi"
--#include "bcm2835-rpi.dtsi"
--#include "bcm2838-rpi.dtsi"
--
--/ {
-- compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
-- model = "Raspberry Pi 4 Model B";
--
-- chosen {
-- /* 8250 auxiliary UART instead of pl011 */
-- stdout-path = "serial1:115200n8";
-- };
--
-- memory@0 {
-- reg = <0 0 0x40000000>;
-- };
--
-- leds {
-- act {
-- gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-- };
--
-- pwr {
-- label = "PWR";
-- gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-- };
-- };
--
-- wifi_pwrseq: wifi-pwrseq {
-- compatible = "mmc-pwrseq-simple";
-- reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-- };
--
-- sd_io_1v8_reg: sd_io_1v8_reg {
-- status = "okay";
-- compatible = "regulator-gpio";
-- vin-supply = <&vdd_5v0_reg>;
-- regulator-name = "vdd-sd-io";
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <3300000>;
-- regulator-boot-on;
-- regulator-always-on;
-- regulator-settling-time-us = <5000>;
--
-- gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-- states = <1800000 0x1
-- 3300000 0x0>;
-- };
--};
--
--&firmware {
-- expgpio: gpio {
-- compatible = "raspberrypi,firmware-gpio";
-- gpio-controller;
-- #gpio-cells = <2>;
-- gpio-line-names = "BT_ON",
-- "WL_ON",
-- "PWR_LED_OFF",
-- "GLOBAL_RESET",
-- "VDD_SD_IO_SEL",
-- "CAM_GPIO",
-- "",
-- "";
-- status = "okay";
-- };
--};
--
--&pwm1 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
-- status = "okay";
--};
--
--/* SDHCI is used to control the SDIO for wireless */
--&sdhci {
-- #address-cells = <1>;
-- #size-cells = <0>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&emmc_gpio34>;
-- status = "okay";
-- bus-width = <4>;
-- non-removable;
-- mmc-pwrseq = <&wifi_pwrseq>;
--
-- brcmf: wifi@1 {
-- reg = <1>;
-- compatible = "brcm,bcm4329-fmac";
-- };
--};
--
--/* EMMC2 is used to drive the SD card */
--&emmc2 {
-- status = "okay";
-- broken-cd;
-- vqmmc-supply = <&sd_io_1v8_reg>;
--};
--
--/* uart0 communicates with the BT module */
--&uart0 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
-- status = "okay";
--
-- bluetooth {
-- compatible = "brcm,bcm43438-bt";
-- max-speed = <2000000>;
-- shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-- };
--};
--
--/* uart1 is mapped to the pin header */
--&uart1 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&uart1_gpio14>;
-- status = "okay";
--};