1 files changed, 0 insertions, 56 deletions
diff --git a/target/linux/bcm27xx/patches-4.19/950-0762-clk-bcm2835-remove-pllb.patch b/target/linux/bcm27xx/patches-4.19/950-0762-clk-bcm2835-remove-pllb.patch
deleted file mode 100644
index af9dde3362..0000000000
--- a/target/linux/bcm27xx/patches-4.19/950-0762-clk-bcm2835-remove-pllb.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 04ebfc3e25eaa3dd77544b4b950497990b1a327e Mon Sep 17 00:00:00 2001
-From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Date: Wed, 12 Jun 2019 20:24:53 +0200
-Subject: [PATCH] clk: bcm2835: remove pllb
-
-Commit 2256d89333bd17b8b56b42734a7e1046d52f7fc3 upstream.
-
-Raspberry Pi's firmware controls this pll, we should use the firmware
-interface to access it.
-
-Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Acked-by: Eric Anholt <eric@anholt.net>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/bcm/clk-bcm2835.c | 30 ++++--------------------------
- 1 file changed, 4 insertions(+), 26 deletions(-)
-
---- a/drivers/clk/bcm/clk-bcm2835.c
-+++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1755,32 +1755,10 @@ static const struct bcm2835_clk_desc clk
- 		.fixed_divider = 1,
- 		.flags = CLK_SET_RATE_PARENT),
- 
--	/* PLLB is used for the ARM's clock. */
--	[BCM2835_PLLB]		= REGISTER_PLL(
--		SOC_ALL,
--		.name = "pllb",
--		.cm_ctrl_reg = CM_PLLB,
--		.a2w_ctrl_reg = A2W_PLLB_CTRL,
--		.frac_reg = A2W_PLLB_FRAC,
--		.ana_reg_base = A2W_PLLB_ANA0,
--		.reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
--		.lock_mask = CM_LOCK_FLOCKB,
--
--		.ana = &bcm2835_ana_default,
--
--		.min_rate = 600000000u,
--		.max_rate = 3000000000u,
--		.max_fb_rate = BCM2835_MAX_FB_RATE),
--	[BCM2835_PLLB_ARM]	= REGISTER_PLL_DIV(
--		SOC_ALL,
--		.name = "pllb_arm",
--		.source_pll = "pllb",
--		.cm_reg = CM_PLLB,
--		.a2w_reg = A2W_PLLB_ARM,
--		.load_mask = CM_PLLB_LOADARM,
--		.hold_mask = CM_PLLB_HOLDARM,
--		.fixed_divider = 1,
--		.flags = CLK_SET_RATE_PARENT),
-+	/*
-+	 * PLLB is used for the ARM's clock. Controlled by firmware, see
-+	 * clk-raspberrypi.c.
-+	 */
- 
- 	/*
- 	 * PLLC is the core PLL, used to drive the core VPU clock.