aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-4.19/950-0758-clk-bcm283x-add-driver-interfacing-with-Raspberry-Pi.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-4.19/950-0758-clk-bcm283x-add-driver-interfacing-with-Raspberry-Pi.patch')
-rw-r--r--target/linux/bcm27xx/patches-4.19/950-0758-clk-bcm283x-add-driver-interfacing-with-Raspberry-Pi.patch349
1 files changed, 0 insertions, 349 deletions
diff --git a/target/linux/bcm27xx/patches-4.19/950-0758-clk-bcm283x-add-driver-interfacing-with-Raspberry-Pi.patch b/target/linux/bcm27xx/patches-4.19/950-0758-clk-bcm283x-add-driver-interfacing-with-Raspberry-Pi.patch
deleted file mode 100644
index 53428fcbda..0000000000
--- a/target/linux/bcm27xx/patches-4.19/950-0758-clk-bcm283x-add-driver-interfacing-with-Raspberry-Pi.patch
+++ /dev/null
@@ -1,349 +0,0 @@
-From 35306211392a8c17ba6cde2a6b5d1beb61ca7d54 Mon Sep 17 00:00:00 2001
-From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Date: Wed, 12 Jun 2019 20:24:54 +0200
-Subject: [PATCH] clk: bcm283x: add driver interfacing with Raspberry
- Pi's firmware
-
-Commit 4e85e535e6cc6e8a96350e8ee684d0f22eb8629e upstream.
-
-Raspberry Pi's firmware offers an interface though which update it's
-clock's frequencies. This is specially useful in order to change the CPU
-clock (pllb_arm) which is 'owned' by the firmware and we're unable to
-scale using the register interface provided by clk-bcm2835.
-
-Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-Acked-by: Eric Anholt <eric@anholt.net>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/bcm/Kconfig | 7 +
- drivers/clk/bcm/Makefile | 1 +
- drivers/clk/bcm/clk-raspberrypi.c | 300 ++++++++++++++++++++++++++++++
- 3 files changed, 308 insertions(+)
- create mode 100644 drivers/clk/bcm/clk-raspberrypi.c
-
---- a/drivers/clk/bcm/Kconfig
-+++ b/drivers/clk/bcm/Kconfig
-@@ -63,3 +63,10 @@ config CLK_BCM_SR
- default ARCH_BCM_IPROC
- help
- Enable common clock framework support for the Broadcom Stingray SoC
-+
-+config CLK_RASPBERRYPI
-+ tristate "Raspberry Pi firmware based clock support"
-+ depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
-+ help
-+ Enable common clock framework support for Raspberry Pi's firmware
-+ dependent clocks
---- a/drivers/clk/bcm/Makefile
-+++ b/drivers/clk/bcm/Makefile
-@@ -7,6 +7,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm216
- obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
- obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
- obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835-aux.o
-+obj-$(CONFIG_CLK_RASPBERRYPI) += clk-raspberrypi.o
- obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o
- obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o
- obj-$(CONFIG_CLK_BCM_HR2) += clk-hr2.o
---- /dev/null
-+++ b/drivers/clk/bcm/clk-raspberrypi.c
-@@ -0,0 +1,300 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Raspberry Pi driver for firmware controlled clocks
-+ *
-+ * Even though clk-bcm2835 provides an interface to the hardware registers for
-+ * the system clocks we've had to factor out 'pllb' as the firmware 'owns' it.
-+ * We're not allowed to change it directly as we might race with the
-+ * over-temperature and under-voltage protections provided by the firmware.
-+ *
-+ * Copyright (C) 2019 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
-+ */
-+
-+#include <linux/clkdev.h>
-+#include <linux/clk-provider.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <soc/bcm2835/raspberrypi-firmware.h>
-+
-+#define RPI_FIRMWARE_ARM_CLK_ID 0x00000003
-+
-+#define RPI_FIRMWARE_STATE_ENABLE_BIT BIT(0)
-+#define RPI_FIRMWARE_STATE_WAIT_BIT BIT(1)
-+
-+/*
-+ * Even though the firmware interface alters 'pllb' the frequencies are
-+ * provided as per 'pllb_arm'. We need to scale before passing them trough.
-+ */
-+#define RPI_FIRMWARE_PLLB_ARM_DIV_RATE 2
-+
-+#define A2W_PLL_FRAC_BITS 20
-+
-+struct raspberrypi_clk {
-+ struct device *dev;
-+ struct rpi_firmware *firmware;
-+
-+ unsigned long min_rate;
-+ unsigned long max_rate;
-+
-+ struct clk_hw pllb;
-+ struct clk_hw *pllb_arm;
-+ struct clk_lookup *pllb_arm_lookup;
-+};
-+
-+/*
-+ * Structure of the message passed to Raspberry Pi's firmware in order to
-+ * change clock rates. The 'disable_turbo' option is only available to the ARM
-+ * clock (pllb) which we enable by default as turbo mode will alter multiple
-+ * clocks at once.
-+ *
-+ * Even though we're able to access the clock registers directly we're bound to
-+ * use the firmware interface as the firmware ultimately takes care of
-+ * mitigating overheating/undervoltage situations and we would be changing
-+ * frequencies behind his back.
-+ *
-+ * For more information on the firmware interface check:
-+ * https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface
-+ */
-+struct raspberrypi_firmware_prop {
-+ __le32 id;
-+ __le32 val;
-+ __le32 disable_turbo;
-+} __packed;
-+
-+static int raspberrypi_clock_property(struct rpi_firmware *firmware, u32 tag,
-+ u32 clk, u32 *val)
-+{
-+ struct raspberrypi_firmware_prop msg = {
-+ .id = cpu_to_le32(clk),
-+ .val = cpu_to_le32(*val),
-+ .disable_turbo = cpu_to_le32(1),
-+ };
-+ int ret;
-+
-+ ret = rpi_firmware_property(firmware, tag, &msg, sizeof(msg));
-+ if (ret)
-+ return ret;
-+
-+ *val = le32_to_cpu(msg.val);
-+
-+ return 0;
-+}
-+
-+static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
-+{
-+ struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
-+ pllb);
-+ u32 val = 0;
-+ int ret;
-+
-+ ret = raspberrypi_clock_property(rpi->firmware,
-+ RPI_FIRMWARE_GET_CLOCK_STATE,
-+ RPI_FIRMWARE_ARM_CLK_ID, &val);
-+ if (ret)
-+ return 0;
-+
-+ return !!(val & RPI_FIRMWARE_STATE_ENABLE_BIT);
-+}
-+
-+
-+static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
-+ pllb);
-+ u32 val = 0;
-+ int ret;
-+
-+ ret = raspberrypi_clock_property(rpi->firmware,
-+ RPI_FIRMWARE_GET_CLOCK_RATE,
-+ RPI_FIRMWARE_ARM_CLK_ID,
-+ &val);
-+ if (ret)
-+ return ret;
-+
-+ return val * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-+}
-+
-+static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long parent_rate)
-+{
-+ struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
-+ pllb);
-+ u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-+ int ret;
-+
-+ ret = raspberrypi_clock_property(rpi->firmware,
-+ RPI_FIRMWARE_SET_CLOCK_RATE,
-+ RPI_FIRMWARE_ARM_CLK_ID,
-+ &new_rate);
-+ if (ret)
-+ dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d",
-+ clk_hw_get_name(hw), ret);
-+
-+ return ret;
-+}
-+
-+/*
-+ * Sadly there is no firmware rate rounding interface. We borrowed it from
-+ * clk-bcm2835.
-+ */
-+static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
-+ struct clk_rate_request *req)
-+{
-+ struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
-+ pllb);
-+ u64 div, final_rate;
-+ u32 ndiv, fdiv;
-+
-+ /* We can't use req->rate directly as it would overflow */
-+ final_rate = clamp(req->rate, rpi->min_rate, rpi->max_rate);
-+
-+ div = (u64)final_rate << A2W_PLL_FRAC_BITS;
-+ do_div(div, req->best_parent_rate);
-+
-+ ndiv = div >> A2W_PLL_FRAC_BITS;
-+ fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1);
-+
-+ final_rate = ((u64)req->best_parent_rate *
-+ ((ndiv << A2W_PLL_FRAC_BITS) + fdiv));
-+
-+ req->rate = final_rate >> A2W_PLL_FRAC_BITS;
-+
-+ return 0;
-+}
-+
-+static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
-+ .is_prepared = raspberrypi_fw_pll_is_on,
-+ .recalc_rate = raspberrypi_fw_pll_get_rate,
-+ .set_rate = raspberrypi_fw_pll_set_rate,
-+ .determine_rate = raspberrypi_pll_determine_rate,
-+};
-+
-+static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
-+{
-+ u32 min_rate = 0, max_rate = 0;
-+ struct clk_init_data init;
-+ int ret;
-+
-+ memset(&init, 0, sizeof(init));
-+
-+ /* All of the PLLs derive from the external oscillator. */
-+ init.parent_names = (const char *[]){ "osc" };
-+ init.num_parents = 1;
-+ init.name = "pllb";
-+ init.ops = &raspberrypi_firmware_pll_clk_ops;
-+ init.flags = CLK_GET_RATE_NOCACHE | CLK_IGNORE_UNUSED;
-+
-+ /* Get min & max rates set by the firmware */
-+ ret = raspberrypi_clock_property(rpi->firmware,
-+ RPI_FIRMWARE_GET_MIN_CLOCK_RATE,
-+ RPI_FIRMWARE_ARM_CLK_ID,
-+ &min_rate);
-+ if (ret) {
-+ dev_err(rpi->dev, "Failed to get %s min freq: %d\n",
-+ init.name, ret);
-+ return ret;
-+ }
-+
-+ ret = raspberrypi_clock_property(rpi->firmware,
-+ RPI_FIRMWARE_GET_MAX_CLOCK_RATE,
-+ RPI_FIRMWARE_ARM_CLK_ID,
-+ &max_rate);
-+ if (ret) {
-+ dev_err(rpi->dev, "Failed to get %s max freq: %d\n",
-+ init.name, ret);
-+ return ret;
-+ }
-+
-+ if (!min_rate || !max_rate) {
-+ dev_err(rpi->dev, "Unexpected frequency range: min %u, max %u\n",
-+ min_rate, max_rate);
-+ return -EINVAL;
-+ }
-+
-+ dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n",
-+ min_rate, max_rate);
-+
-+ rpi->min_rate = min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-+ rpi->max_rate = max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-+
-+ rpi->pllb.init = &init;
-+
-+ return devm_clk_hw_register(rpi->dev, &rpi->pllb);
-+}
-+
-+static int raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi)
-+{
-+ rpi->pllb_arm = clk_hw_register_fixed_factor(rpi->dev,
-+ "pllb_arm", "pllb",
-+ CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
-+ 1, 2);
-+ if (IS_ERR(rpi->pllb_arm)) {
-+ dev_err(rpi->dev, "Failed to initialize pllb_arm\n");
-+ return PTR_ERR(rpi->pllb_arm);
-+ }
-+
-+ rpi->pllb_arm_lookup = clkdev_hw_create(rpi->pllb_arm, NULL, "cpu0");
-+ if (!rpi->pllb_arm_lookup) {
-+ dev_err(rpi->dev, "Failed to initialize pllb_arm_lookup\n");
-+ clk_hw_unregister_fixed_factor(rpi->pllb_arm);
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-+
-+static int raspberrypi_clk_probe(struct platform_device *pdev)
-+{
-+ struct device_node *firmware_node;
-+ struct device *dev = &pdev->dev;
-+ struct rpi_firmware *firmware;
-+ struct raspberrypi_clk *rpi;
-+ int ret;
-+
-+ firmware_node = of_find_compatible_node(NULL, NULL,
-+ "raspberrypi,bcm2835-firmware");
-+ if (!firmware_node) {
-+ dev_err(dev, "Missing firmware node\n");
-+ return -ENOENT;
-+ }
-+
-+ firmware = rpi_firmware_get(firmware_node);
-+ of_node_put(firmware_node);
-+ if (!firmware)
-+ return -EPROBE_DEFER;
-+
-+ rpi = devm_kzalloc(dev, sizeof(*rpi), GFP_KERNEL);
-+ if (!rpi)
-+ return -ENOMEM;
-+
-+ rpi->dev = dev;
-+ rpi->firmware = firmware;
-+
-+ ret = raspberrypi_register_pllb(rpi);
-+ if (ret) {
-+ dev_err(dev, "Failed to initialize pllb, %d\n", ret);
-+ return ret;
-+ }
-+
-+ ret = raspberrypi_register_pllb_arm(rpi);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static struct platform_driver raspberrypi_clk_driver = {
-+ .driver = {
-+ .name = "raspberrypi-clk",
-+ },
-+ .probe = raspberrypi_clk_probe,
-+};
-+module_platform_driver(raspberrypi_clk_driver);
-+
-+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
-+MODULE_DESCRIPTION("Raspberry Pi firmware clock driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:raspberrypi-clk");