1 files changed, 0 insertions, 183 deletions
diff --git a/target/linux/bcm27xx/patches-4.19/950-0720-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch b/target/linux/bcm27xx/patches-4.19/950-0720-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
deleted file mode 100644
index e06247753d..0000000000
--- a/target/linux/bcm27xx/patches-4.19/950-0720-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
+++ /dev/null
@@ -1,183 +0,0 @@
-From 268bd5b5557ccb0ac4eae998ad7c6261c240b89b Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <wahrenst@gmx.net>
-Date: Sun, 21 Jul 2019 16:01:36 +0200
-Subject: [PATCH] pinctrl: bcm2835: Add support for BCM2711 pull-up
- functionality
-
-commit e38a9a437fb93ddafab5030165e4c6a3a5021669 upstream.
-
-The BCM2711 has a new way of selecting the pull-up/pull-down setting
-for a GPIO pin. The registers used for the BCM2835, GP_PUD and
-GP_PUDCLKn0, are no longer connected. A new set of registers,
-GP_GPIO_PUP_PDN_CNTRL_REGx must be used. This commit will add
-a new compatible string "brcm,bcm2711-gpio" and the kernel
-driver will use it to select which method is used to select
-pull-up/pull-down.
-
-This patch based on a patch by Al Cooper which was intended for the
-BCM7211. This is a bugfixed and improved version.
-
-Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
-Acked-by: Eric Anholt <eric@anholt.net>
----
- drivers/pinctrl/bcm/pinctrl-bcm2835.c | 105 ++++++++++++++++++++++++--
- 1 file changed, 100 insertions(+), 5 deletions(-)
-
---- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
-+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
-@@ -57,15 +57,24 @@
- #define GPAFEN0		0x88	/* Pin Async Falling Edge Detect */
- #define GPPUD		0x94	/* Pin Pull-up/down Enable */
- #define GPPUDCLK0	0x98	/* Pin Pull-up/down Enable Clock */
-+#define GP_GPIO_PUP_PDN_CNTRL_REG0 0xe4 /* 2711 Pin Pull-up/down select */
- 
- #define FSEL_REG(p)		(GPFSEL0 + (((p) / 10) * 4))
- #define FSEL_SHIFT(p)		(((p) % 10) * 3)
- #define GPIO_REG_OFFSET(p)	((p) / 32)
- #define GPIO_REG_SHIFT(p)	((p) % 32)
- 
-+#define PUD_2711_MASK		0x3
-+#define PUD_2711_REG_OFFSET(p)	((p) / 16)
-+#define PUD_2711_REG_SHIFT(p)	(((p) % 16) * 2)
-+
- /* argument: bcm2835_pinconf_pull */
- #define BCM2835_PINCONF_PARAM_PULL	(PIN_CONFIG_END + 1)
- 
-+#define BCM2711_PULL_NONE	0x0
-+#define BCM2711_PULL_UP		0x1
-+#define BCM2711_PULL_DOWN	0x2
-+
- struct bcm2835_pinctrl {
- 	struct device *dev;
- 	void __iomem *base;
-@@ -975,6 +984,77 @@ static const struct pinconf_ops bcm2835_
- 	.pin_config_set = bcm2835_pinconf_set,
- };
- 
-+static void bcm2711_pull_config_set(struct bcm2835_pinctrl *pc,
-+				    unsigned int pin, unsigned int arg)
-+{
-+	u32 shifter;
-+	u32 value;
-+	u32 off;
-+
-+	off = PUD_2711_REG_OFFSET(pin);
-+	shifter = PUD_2711_REG_SHIFT(pin);
-+
-+	value = bcm2835_gpio_rd(pc, GP_GPIO_PUP_PDN_CNTRL_REG0 + (off * 4));
-+	value &= ~(PUD_2711_MASK << shifter);
-+	value |= (arg << shifter);
-+	bcm2835_gpio_wr(pc, GP_GPIO_PUP_PDN_CNTRL_REG0 + (off * 4), value);
-+}
-+
-+static int bcm2711_pinconf_set(struct pinctrl_dev *pctldev,
-+			       unsigned int pin, unsigned long *configs,
-+			       unsigned int num_configs)
-+{
-+	struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
-+	u32 param, arg;
-+	int i;
-+
-+	for (i = 0; i < num_configs; i++) {
-+		param = pinconf_to_config_param(configs[i]);
-+		arg = pinconf_to_config_argument(configs[i]);
-+
-+		switch (param) {
-+		/* convert legacy brcm,pull */
-+		case BCM2835_PINCONF_PARAM_PULL:
-+			if (arg == BCM2835_PUD_UP)
-+				arg = BCM2711_PULL_UP;
-+			else if (arg == BCM2835_PUD_DOWN)
-+				arg = BCM2711_PULL_DOWN;
-+			else
-+				arg = BCM2711_PULL_NONE;
-+
-+			bcm2711_pull_config_set(pc, pin, arg);
-+			break;
-+
-+		/* Set pull generic bindings */
-+		case PIN_CONFIG_BIAS_DISABLE:
-+			bcm2711_pull_config_set(pc, pin, BCM2711_PULL_NONE);
-+			break;
-+		case PIN_CONFIG_BIAS_PULL_DOWN:
-+			bcm2711_pull_config_set(pc, pin, BCM2711_PULL_DOWN);
-+			break;
-+		case PIN_CONFIG_BIAS_PULL_UP:
-+			bcm2711_pull_config_set(pc, pin, BCM2711_PULL_UP);
-+			break;
-+
-+		/* Set output-high or output-low */
-+		case PIN_CONFIG_OUTPUT:
-+			bcm2835_gpio_set_bit(pc, arg ? GPSET0 : GPCLR0, pin);
-+			break;
-+
-+		default:
-+			return -ENOTSUPP;
-+		}
-+	} /* for each config */
-+
-+	return 0;
-+}
-+
-+static const struct pinconf_ops bcm2711_pinconf_ops = {
-+	.is_generic = true,
-+	.pin_config_get = bcm2835_pinconf_get,
-+	.pin_config_set = bcm2711_pinconf_set,
-+};
-+
- static struct pinctrl_desc bcm2835_pinctrl_desc = {
- 	.name = MODULE_NAME,
- 	.pins = bcm2835_gpio_pins,
-@@ -990,6 +1070,18 @@ static struct pinctrl_gpio_range bcm2835
- 	.npins = BCM2835_NUM_GPIOS,
- };
- 
-+static const struct of_device_id bcm2835_pinctrl_match[] = {
-+	{
-+		.compatible = "brcm,bcm2835-gpio",
-+		.data = &bcm2835_pinconf_ops,
-+	},
-+	{
-+		.compatible = "brcm,bcm2711-gpio",
-+		.data = &bcm2711_pinconf_ops,
-+	},
-+	{}
-+};
-+
- static int bcm2835_pinctrl_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-@@ -997,6 +1089,8 @@ static int bcm2835_pinctrl_probe(struct
- 	struct bcm2835_pinctrl *pc;
- 	struct resource iomem;
- 	int err, i;
-+	const struct of_device_id *match;
-+
- 	BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
- 	BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
- 
-@@ -1073,6 +1167,12 @@ static int bcm2835_pinctrl_probe(struct
- 					     bcm2835_gpio_irq_handler);
- 	}
- 
-+	match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
-+	if (match) {
-+		bcm2835_pinctrl_desc.confops =
-+			(const struct pinconf_ops *)match->data;
-+	}
-+
- 	pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
- 	if (IS_ERR(pc->pctl_dev)) {
- 		gpiochip_remove(&pc->gpio_chip);
-@@ -1087,11 +1187,6 @@ static int bcm2835_pinctrl_probe(struct
- 	return 0;
- }
- 
--static const struct of_device_id bcm2835_pinctrl_match[] = {
--	{ .compatible = "brcm,bcm2835-gpio" },
--	{}
--};
--
- static struct platform_driver bcm2835_pinctrl_driver = {
- 	.probe = bcm2835_pinctrl_probe,
- 	.driver = {