aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-4.19/950-0481-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-4.19/950-0481-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch')
-rw-r--r--target/linux/bcm27xx/patches-4.19/950-0481-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch825
1 files changed, 825 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-4.19/950-0481-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch b/target/linux/bcm27xx/patches-4.19/950-0481-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch
new file mode 100644
index 0000000000..229dbe520c
--- /dev/null
+++ b/target/linux/bcm27xx/patches-4.19/950-0481-soc-bcm-bcm2835-pm-Add-support-for-power-domains-und.patch
@@ -0,0 +1,825 @@
+From fd8ca458728baabe9cae37836088a33c8642d420 Mon Sep 17 00:00:00 2001
+From: Eric Anholt <eric@anholt.net>
+Date: Wed, 12 Dec 2018 15:51:48 -0800
+Subject: [PATCH] soc: bcm: bcm2835-pm: Add support for power domains
+ under a new binding.
+
+This provides a free software alternative to raspberrypi-power.c's
+firmware calls to manage power domains. It also exposes a reset line,
+where previously the vc4 driver had to try to force power off the
+domain in order to trigger a reset.
+
+Signed-off-by: Eric Anholt <eric@anholt.net>
+Acked-by: Rob Herring <robh@kernel.org>
+Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
+Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
+(cherry picked from commit 670c672608a1ffcbc7ac0f872734843593bb8b15)
+---
+ drivers/mfd/bcm2835-pm.c | 36 +-
+ drivers/soc/bcm/Kconfig | 11 +
+ drivers/soc/bcm/Makefile | 1 +
+ drivers/soc/bcm/bcm2835-power.c | 661 +++++++++++++++++++++++++++
+ include/dt-bindings/soc/bcm2835-pm.h | 28 ++
+ include/linux/mfd/bcm2835-pm.h | 1 +
+ 6 files changed, 734 insertions(+), 4 deletions(-)
+ create mode 100644 drivers/soc/bcm/bcm2835-power.c
+ create mode 100644 include/dt-bindings/soc/bcm2835-pm.h
+
+--- a/drivers/mfd/bcm2835-pm.c
++++ b/drivers/mfd/bcm2835-pm.c
+@@ -3,7 +3,7 @@
+ * PM MFD driver for Broadcom BCM2835
+ *
+ * This driver binds to the PM block and creates the MFD device for
+- * the WDT driver.
++ * the WDT and power drivers.
+ */
+
+ #include <linux/delay.h>
+@@ -21,11 +21,16 @@ static const struct mfd_cell bcm2835_pm_
+ { .name = "bcm2835-wdt" },
+ };
+
++static const struct mfd_cell bcm2835_power_devs[] = {
++ { .name = "bcm2835-power" },
++};
++
+ static int bcm2835_pm_probe(struct platform_device *pdev)
+ {
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ struct bcm2835_pm *pm;
++ int ret;
+
+ pm = devm_kzalloc(dev, sizeof(*pm), GFP_KERNEL);
+ if (!pm)
+@@ -39,13 +44,36 @@ static int bcm2835_pm_probe(struct platf
+ if (IS_ERR(pm->base))
+ return PTR_ERR(pm->base);
+
+- return devm_mfd_add_devices(dev, -1,
+- bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs),
+- NULL, 0, NULL);
++ ret = devm_mfd_add_devices(dev, -1,
++ bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs),
++ NULL, 0, NULL);
++ if (ret)
++ return ret;
++
++ /* We'll use the presence of the AXI ASB regs in the
++ * bcm2835-pm binding as the key for whether we can reference
++ * the full PM register range and support power domains.
++ */
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (res) {
++ pm->asb = devm_ioremap_resource(dev, res);
++ if (IS_ERR(pm->asb))
++ return PTR_ERR(pm->asb);
++
++ ret = devm_mfd_add_devices(dev, -1,
++ bcm2835_power_devs,
++ ARRAY_SIZE(bcm2835_power_devs),
++ NULL, 0, NULL);
++ if (ret)
++ return ret;
++ }
++
++ return 0;
+ }
+
+ static const struct of_device_id bcm2835_pm_of_match[] = {
+ { .compatible = "brcm,bcm2835-pm-wdt", },
++ { .compatible = "brcm,bcm2835-pm", },
+ {},
+ };
+ MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match);
+--- a/drivers/soc/bcm/Kconfig
++++ b/drivers/soc/bcm/Kconfig
+@@ -1,5 +1,16 @@
+ menu "Broadcom SoC drivers"
+
++config BCM2835_POWER
++ bool "BCM2835 power domain driver"
++ depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
++ select PM_GENERIC_DOMAINS if PM
++ select RESET_CONTROLLER
++ help
++ This enables support for the BCM2835 power domains and reset
++ controller. Any usage of power domains by the Raspberry Pi
++ firmware means that Linux usage of the same power domain
++ must be accessed using the RASPBERRYPI_POWER driver
++
+ config RASPBERRYPI_POWER
+ bool "Raspberry Pi power domain driver"
+ depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
+--- a/drivers/soc/bcm/Makefile
++++ b/drivers/soc/bcm/Makefile
+@@ -1,2 +1,3 @@
++obj-$(CONFIG_BCM2835_POWER) += bcm2835-power.o
+ obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o
+ obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
+--- /dev/null
++++ b/drivers/soc/bcm/bcm2835-power.c
+@@ -0,0 +1,661 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * Power domain driver for Broadcom BCM2835
++ *
++ * Copyright (C) 2018 Broadcom
++ */
++
++#include <dt-bindings/soc/bcm2835-pm.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/mfd/bcm2835-pm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/pm_domain.h>
++#include <linux/reset-controller.h>
++#include <linux/types.h>
++
++#define PM_GNRIC 0x00
++#define PM_AUDIO 0x04
++#define PM_STATUS 0x18
++#define PM_RSTC 0x1c
++#define PM_RSTS 0x20
++#define PM_WDOG 0x24
++#define PM_PADS0 0x28
++#define PM_PADS2 0x2c
++#define PM_PADS3 0x30
++#define PM_PADS4 0x34
++#define PM_PADS5 0x38
++#define PM_PADS6 0x3c
++#define PM_CAM0 0x44
++#define PM_CAM0_LDOHPEN BIT(2)
++#define PM_CAM0_LDOLPEN BIT(1)
++#define PM_CAM0_CTRLEN BIT(0)
++
++#define PM_CAM1 0x48
++#define PM_CAM1_LDOHPEN BIT(2)
++#define PM_CAM1_LDOLPEN BIT(1)
++#define PM_CAM1_CTRLEN BIT(0)
++
++#define PM_CCP2TX 0x4c
++#define PM_CCP2TX_LDOEN BIT(1)
++#define PM_CCP2TX_CTRLEN BIT(0)
++
++#define PM_DSI0 0x50
++#define PM_DSI0_LDOHPEN BIT(2)
++#define PM_DSI0_LDOLPEN BIT(1)
++#define PM_DSI0_CTRLEN BIT(0)
++
++#define PM_DSI1 0x54
++#define PM_DSI1_LDOHPEN BIT(2)
++#define PM_DSI1_LDOLPEN BIT(1)
++#define PM_DSI1_CTRLEN BIT(0)
++
++#define PM_HDMI 0x58
++#define PM_HDMI_RSTDR BIT(19)
++#define PM_HDMI_LDOPD BIT(1)
++#define PM_HDMI_CTRLEN BIT(0)
++
++#define PM_USB 0x5c
++/* The power gates must be enabled with this bit before enabling the LDO in the
++ * USB block.
++ */
++#define PM_USB_CTRLEN BIT(0)
++
++#define PM_PXLDO 0x60
++#define PM_PXBG 0x64
++#define PM_DFT 0x68
++#define PM_SMPS 0x6c
++#define PM_XOSC 0x70
++#define PM_SPAREW 0x74
++#define PM_SPARER 0x78
++#define PM_AVS_RSTDR 0x7c
++#define PM_AVS_STAT 0x80
++#define PM_AVS_EVENT 0x84
++#define PM_AVS_INTEN 0x88
++#define PM_DUMMY 0xfc
++
++#define PM_IMAGE 0x108
++#define PM_GRAFX 0x10c
++#define PM_PROC 0x110
++#define PM_ENAB BIT(12)
++#define PM_ISPRSTN BIT(8)
++#define PM_H264RSTN BIT(7)
++#define PM_PERIRSTN BIT(6)
++#define PM_V3DRSTN BIT(6)
++#define PM_ISFUNC BIT(5)
++#define PM_MRDONE BIT(4)
++#define PM_MEMREP BIT(3)
++#define PM_ISPOW BIT(2)
++#define PM_POWOK BIT(1)
++#define PM_POWUP BIT(0)
++#define PM_INRUSH_SHIFT 13
++#define PM_INRUSH_3_5_MA 0
++#define PM_INRUSH_5_MA 1
++#define PM_INRUSH_10_MA 2
++#define PM_INRUSH_20_MA 3
++#define PM_INRUSH_MASK (3 << PM_INRUSH_SHIFT)
++
++#define PM_PASSWORD 0x5a000000
++
++#define PM_WDOG_TIME_SET 0x000fffff
++#define PM_RSTC_WRCFG_CLR 0xffffffcf
++#define PM_RSTS_HADWRH_SET 0x00000040
++#define PM_RSTC_WRCFG_SET 0x00000030
++#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
++#define PM_RSTC_RESET 0x00000102
++
++#define PM_READ(reg) readl(power->base + (reg))
++#define PM_WRITE(reg, val) writel(PM_PASSWORD | (val), power->base + (reg))
++
++#define ASB_BRDG_VERSION 0x00
++#define ASB_CPR_CTRL 0x04
++
++#define ASB_V3D_S_CTRL 0x08
++#define ASB_V3D_M_CTRL 0x0c
++#define ASB_ISP_S_CTRL 0x10
++#define ASB_ISP_M_CTRL 0x14
++#define ASB_H264_S_CTRL 0x18
++#define ASB_H264_M_CTRL 0x1c
++
++#define ASB_REQ_STOP BIT(0)
++#define ASB_ACK BIT(1)
++#define ASB_EMPTY BIT(2)
++#define ASB_FULL BIT(3)
++
++#define ASB_AXI_BRDG_ID 0x20
++
++#define ASB_READ(reg) readl(power->asb + (reg))
++#define ASB_WRITE(reg, val) writel(PM_PASSWORD | (val), power->asb + (reg))
++
++struct bcm2835_power_domain {
++ struct generic_pm_domain base;
++ struct bcm2835_power *power;
++ u32 domain;
++ struct clk *clk;
++};
++
++struct bcm2835_power {
++ struct device *dev;
++ /* PM registers. */
++ void __iomem *base;
++ /* AXI Async bridge registers. */
++ void __iomem *asb;
++
++ struct genpd_onecell_data pd_xlate;
++ struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT];
++ struct reset_controller_dev reset;
++};
++
++static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
++{
++ u64 start = ktime_get_ns();
++
++ /* Enable the module's async AXI bridges. */
++ ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
++ while (ASB_READ(reg) & ASB_ACK) {
++ cpu_relax();
++ if (ktime_get_ns() - start >= 1000)
++ return -ETIMEDOUT;
++ }
++
++ return 0;
++}
++
++static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
++{
++ u64 start = ktime_get_ns();
++
++ /* Enable the module's async AXI bridges. */
++ ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
++ while (!(ASB_READ(reg) & ASB_ACK)) {
++ cpu_relax();
++ if (ktime_get_ns() - start >= 1000)
++ return -ETIMEDOUT;
++ }
++
++ return 0;
++}
++
++static int bcm2835_power_power_off(struct bcm2835_power_domain *pd, u32 pm_reg)
++{
++ struct bcm2835_power *power = pd->power;
++
++ /* Enable functional isolation */
++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISFUNC);
++
++ /* Enable electrical isolation */
++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISPOW);
++
++ /* Open the power switches. */
++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_POWUP);
++
++ return 0;
++}
++
++static int bcm2835_power_power_on(struct bcm2835_power_domain *pd, u32 pm_reg)
++{
++ struct bcm2835_power *power = pd->power;
++ struct device *dev = power->dev;
++ u64 start;
++ int ret;
++ int inrush;
++ bool powok;
++
++ /* If it was already powered on by the fw, leave it that way. */
++ if (PM_READ(pm_reg) & PM_POWUP)
++ return 0;
++
++ /* Enable power. Allowing too much current at once may result
++ * in POWOK never getting set, so start low and ramp it up as
++ * necessary to succeed.
++ */
++ powok = false;
++ for (inrush = PM_INRUSH_3_5_MA; inrush <= PM_INRUSH_20_MA; inrush++) {
++ PM_WRITE(pm_reg,
++ (PM_READ(pm_reg) & ~PM_INRUSH_MASK) |
++ (inrush << PM_INRUSH_SHIFT) |
++ PM_POWUP);
++
++ start = ktime_get_ns();
++ while (!(powok = !!(PM_READ(pm_reg) & PM_POWOK))) {
++ cpu_relax();
++ if (ktime_get_ns() - start >= 3000)
++ break;
++ }
++ }
++ if (!powok) {
++ dev_err(dev, "Timeout waiting for %s power OK\n",
++ pd->base.name);
++ ret = -ETIMEDOUT;
++ goto err_disable_powup;
++ }
++
++ /* Disable electrical isolation */
++ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_ISPOW);
++
++ /* Repair memory */
++ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_MEMREP);
++ start = ktime_get_ns();
++ while (!(PM_READ(pm_reg) & PM_MRDONE)) {
++ cpu_relax();
++ if (ktime_get_ns() - start >= 1000) {
++ dev_err(dev, "Timeout waiting for %s memory repair\n",
++ pd->base.name);
++ ret = -ETIMEDOUT;
++ goto err_disable_ispow;
++ }
++ }
++
++ /* Disable functional isolation */
++ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_ISFUNC);
++
++ return 0;
++
++err_disable_ispow:
++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISPOW);
++err_disable_powup:
++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~(PM_POWUP | PM_INRUSH_MASK));
++ return ret;
++}
++
++static int bcm2835_asb_power_on(struct bcm2835_power_domain *pd,
++ u32 pm_reg,
++ u32 asb_m_reg,
++ u32 asb_s_reg,
++ u32 reset_flags)
++{
++ struct bcm2835_power *power = pd->power;
++ int ret;
++
++ ret = clk_prepare_enable(pd->clk);
++ if (ret) {
++ dev_err(power->dev, "Failed to enable clock for %s\n",
++ pd->base.name);
++ return ret;
++ }
++
++ /* Wait 32 clocks for reset to propagate, 1 us will be enough */
++ udelay(1);
++
++ clk_disable_unprepare(pd->clk);
++
++ /* Deassert the resets. */
++ PM_WRITE(pm_reg, PM_READ(pm_reg) | reset_flags);
++
++ ret = clk_prepare_enable(pd->clk);
++ if (ret) {
++ dev_err(power->dev, "Failed to enable clock for %s\n",
++ pd->base.name);
++ goto err_enable_resets;
++ }
++
++ ret = bcm2835_asb_enable(power, asb_m_reg);
++ if (ret) {
++ dev_err(power->dev, "Failed to enable ASB master for %s\n",
++ pd->base.name);
++ goto err_disable_clk;
++ }
++ ret = bcm2835_asb_enable(power, asb_s_reg);
++ if (ret) {
++ dev_err(power->dev, "Failed to enable ASB slave for %s\n",
++ pd->base.name);
++ goto err_disable_asb_master;
++ }
++
++ return 0;
++
++err_disable_asb_master:
++ bcm2835_asb_disable(power, asb_m_reg);
++err_disable_clk:
++ clk_disable_unprepare(pd->clk);
++err_enable_resets:
++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~reset_flags);
++ return ret;
++}
++
++static int bcm2835_asb_power_off(struct bcm2835_power_domain *pd,
++ u32 pm_reg,
++ u32 asb_m_reg,
++ u32 asb_s_reg,
++ u32 reset_flags)
++{
++ struct bcm2835_power *power = pd->power;
++ int ret;
++
++ ret = bcm2835_asb_disable(power, asb_s_reg);
++ if (ret) {
++ dev_warn(power->dev, "Failed to disable ASB slave for %s\n",
++ pd->base.name);
++ return ret;
++ }
++ ret = bcm2835_asb_disable(power, asb_m_reg);
++ if (ret) {
++ dev_warn(power->dev, "Failed to disable ASB master for %s\n",
++ pd->base.name);
++ bcm2835_asb_enable(power, asb_s_reg);
++ return ret;
++ }
++
++ clk_disable_unprepare(pd->clk);
++
++ /* Assert the resets. */
++ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~reset_flags);
++
++ return 0;
++}
++
++static int bcm2835_power_pd_power_on(struct generic_pm_domain *domain)
++{
++ struct bcm2835_power_domain *pd =
++ container_of(domain, struct bcm2835_power_domain, base);
++ struct bcm2835_power *power = pd->power;
++
++ switch (pd->domain) {
++ case BCM2835_POWER_DOMAIN_GRAFX:
++ return bcm2835_power_power_on(pd, PM_GRAFX);
++
++ case BCM2835_POWER_DOMAIN_GRAFX_V3D:
++ return bcm2835_asb_power_on(pd, PM_GRAFX,
++ ASB_V3D_M_CTRL, ASB_V3D_S_CTRL,
++ PM_V3DRSTN);
++
++ case BCM2835_POWER_DOMAIN_IMAGE:
++ return bcm2835_power_power_on(pd, PM_IMAGE);
++
++ case BCM2835_POWER_DOMAIN_IMAGE_PERI:
++ return bcm2835_asb_power_on(pd, PM_IMAGE,
++ 0, 0,
++ PM_PERIRSTN);
++
++ case BCM2835_POWER_DOMAIN_IMAGE_ISP:
++ return bcm2835_asb_power_on(pd, PM_IMAGE,
++ ASB_ISP_M_CTRL, ASB_ISP_S_CTRL,
++ PM_ISPRSTN);
++
++ case BCM2835_POWER_DOMAIN_IMAGE_H264:
++ return bcm2835_asb_power_on(pd, PM_IMAGE,
++ ASB_H264_M_CTRL, ASB_H264_S_CTRL,
++ PM_H264RSTN);
++
++ case BCM2835_POWER_DOMAIN_USB:
++ PM_WRITE(PM_USB, PM_USB_CTRLEN);
++ return 0;
++
++ case BCM2835_POWER_DOMAIN_DSI0:
++ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN);
++ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN | PM_DSI0_LDOHPEN);
++ return 0;
++
++ case BCM2835_POWER_DOMAIN_DSI1:
++ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN);
++ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN | PM_DSI1_LDOHPEN);
++ return 0;
++
++ case BCM2835_POWER_DOMAIN_CCP2TX:
++ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN);
++ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN | PM_CCP2TX_LDOEN);
++ return 0;
++
++ case BCM2835_POWER_DOMAIN_HDMI:
++ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_RSTDR);
++ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_CTRLEN);
++ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_LDOPD);
++ usleep_range(100, 200);
++ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_RSTDR);
++ return 0;
++
++ default:
++ dev_err(power->dev, "Invalid domain %d\n", pd->domain);
++ return -EINVAL;
++ }
++}
++
++static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain)
++{
++ struct bcm2835_power_domain *pd =
++ container_of(domain, struct bcm2835_power_domain, base);
++ struct bcm2835_power *power = pd->power;
++
++ switch (pd->domain) {
++ case BCM2835_POWER_DOMAIN_GRAFX:
++ return bcm2835_power_power_off(pd, PM_GRAFX);
++
++ case BCM2835_POWER_DOMAIN_GRAFX_V3D:
++ return bcm2835_asb_power_off(pd, PM_GRAFX,
++ ASB_V3D_M_CTRL, ASB_V3D_S_CTRL,
++ PM_V3DRSTN);
++
++ case BCM2835_POWER_DOMAIN_IMAGE:
++ return bcm2835_power_power_off(pd, PM_IMAGE);
++
++ case BCM2835_POWER_DOMAIN_IMAGE_PERI:
++ return bcm2835_asb_power_off(pd, PM_IMAGE,
++ 0, 0,
++ PM_PERIRSTN);
++
++ case BCM2835_POWER_DOMAIN_IMAGE_ISP:
++ return bcm2835_asb_power_off(pd, PM_IMAGE,
++ ASB_ISP_M_CTRL, ASB_ISP_S_CTRL,
++ PM_ISPRSTN);
++
++ case BCM2835_POWER_DOMAIN_IMAGE_H264:
++ return bcm2835_asb_power_off(pd, PM_IMAGE,
++ ASB_H264_M_CTRL, ASB_H264_S_CTRL,
++ PM_H264RSTN);
++
++ case BCM2835_POWER_DOMAIN_USB:
++ PM_WRITE(PM_USB, 0);
++ return 0;
++
++ case BCM2835_POWER_DOMAIN_DSI0:
++ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN);
++ PM_WRITE(PM_DSI0, 0);
++ return 0;
++
++ case BCM2835_POWER_DOMAIN_DSI1:
++ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN);
++ PM_WRITE(PM_DSI1, 0);
++ return 0;
++
++ case BCM2835_POWER_DOMAIN_CCP2TX:
++ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN);
++ PM_WRITE(PM_CCP2TX, 0);
++ return 0;
++
++ case BCM2835_POWER_DOMAIN_HDMI:
++ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_LDOPD);
++ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_CTRLEN);
++ return 0;
++
++ default:
++ dev_err(power->dev, "Invalid domain %d\n", pd->domain);
++ return -EINVAL;
++ }
++}
++
++static void
++bcm2835_init_power_domain(struct bcm2835_power *power,
++ int pd_xlate_index, const char *name)
++{
++ struct device *dev = power->dev;
++ struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index];
++
++ dom->clk = devm_clk_get(dev->parent, name);
++
++ dom->base.name = name;
++ dom->base.power_on = bcm2835_power_pd_power_on;
++ dom->base.power_off = bcm2835_power_pd_power_off;
++
++ dom->domain = pd_xlate_index;
++ dom->power = power;
++
++ /* XXX: on/off at boot? */
++ pm_genpd_init(&dom->base, NULL, true);
++
++ power->pd_xlate.domains[pd_xlate_index] = &dom->base;
++}
++
++/** bcm2835_reset_reset - Resets a block that has a reset line in the
++ * PM block.
++ *
++ * The consumer of the reset controller must have the power domain up
++ * -- there's no reset ability with the power domain down. To reset
++ * the sub-block, we just disable its access to memory through the
++ * ASB, reset, and re-enable.
++ */
++static int bcm2835_reset_reset(struct reset_controller_dev *rcdev,
++ unsigned long id)
++{
++ struct bcm2835_power *power = container_of(rcdev, struct bcm2835_power,
++ reset);
++ struct bcm2835_power_domain *pd;
++ int ret;
++
++ switch (id) {
++ case BCM2835_RESET_V3D:
++ pd = &power->domains[BCM2835_POWER_DOMAIN_GRAFX_V3D];
++ break;
++ case BCM2835_RESET_H264:
++ pd = &power->domains[BCM2835_POWER_DOMAIN_IMAGE_H264];
++ break;
++ case BCM2835_RESET_ISP:
++ pd = &power->domains[BCM2835_POWER_DOMAIN_IMAGE_ISP];
++ break;
++ default:
++ dev_err(power->dev, "Bad reset id %ld\n", id);
++ return -EINVAL;
++ }
++
++ ret = bcm2835_power_pd_power_off(&pd->base);
++ if (ret)
++ return ret;
++
++ return bcm2835_power_pd_power_on(&pd->base);
++}
++
++static int bcm2835_reset_status(struct reset_controller_dev *rcdev,
++ unsigned long id)
++{
++ struct bcm2835_power *power = container_of(rcdev, struct bcm2835_power,
++ reset);
++
++ switch (id) {
++ case BCM2835_RESET_V3D:
++ return !PM_READ(PM_GRAFX & PM_V3DRSTN);
++ case BCM2835_RESET_H264:
++ return !PM_READ(PM_IMAGE & PM_H264RSTN);
++ case BCM2835_RESET_ISP:
++ return !PM_READ(PM_IMAGE & PM_ISPRSTN);
++ default:
++ return -EINVAL;
++ }
++}
++
++const struct reset_control_ops bcm2835_reset_ops = {
++ .reset = bcm2835_reset_reset,
++ .status = bcm2835_reset_status,
++};
++
++static const char *const power_domain_names[] = {
++ [BCM2835_POWER_DOMAIN_GRAFX] = "grafx",
++ [BCM2835_POWER_DOMAIN_GRAFX_V3D] = "v3d",
++
++ [BCM2835_POWER_DOMAIN_IMAGE] = "image",
++ [BCM2835_POWER_DOMAIN_IMAGE_PERI] = "peri_image",
++ [BCM2835_POWER_DOMAIN_IMAGE_H264] = "h264",
++ [BCM2835_POWER_DOMAIN_IMAGE_ISP] = "isp",
++
++ [BCM2835_POWER_DOMAIN_USB] = "usb",
++ [BCM2835_POWER_DOMAIN_DSI0] = "dsi0",
++ [BCM2835_POWER_DOMAIN_DSI1] = "dsi1",
++ [BCM2835_POWER_DOMAIN_CAM0] = "cam0",
++ [BCM2835_POWER_DOMAIN_CAM1] = "cam1",
++ [BCM2835_POWER_DOMAIN_CCP2TX] = "ccp2tx",
++ [BCM2835_POWER_DOMAIN_HDMI] = "hdmi",
++};
++
++static int bcm2835_power_probe(struct platform_device *pdev)
++{
++ struct bcm2835_pm *pm = dev_get_drvdata(pdev->dev.parent);
++ struct device *dev = &pdev->dev;
++ struct bcm2835_power *power;
++ static const struct {
++ int parent, child;
++ } domain_deps[] = {
++ { BCM2835_POWER_DOMAIN_GRAFX, BCM2835_POWER_DOMAIN_GRAFX_V3D },
++ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_PERI },
++ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_H264 },
++ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_ISP },
++ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_USB },
++ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 },
++ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 },
++ };
++ int ret, i;
++ u32 id;
++
++ power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL);
++ if (!power)
++ return -ENOMEM;
++ platform_set_drvdata(pdev, power);
++
++ power->dev = dev;
++ power->base = pm->base;
++ power->asb = pm->asb;
++
++ id = ASB_READ(ASB_AXI_BRDG_ID);
++ if (id != 0x62726467 /* "BRDG" */) {
++ dev_err(dev, "ASB register ID returned 0x%08x\n", id);
++ return -ENODEV;
++ }
++
++ power->pd_xlate.domains = devm_kcalloc(dev,
++ ARRAY_SIZE(power_domain_names),
++ sizeof(*power->pd_xlate.domains),
++ GFP_KERNEL);
++ if (!power->pd_xlate.domains)
++ return -ENOMEM;
++
++ power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names);
++
++ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++)
++ bcm2835_init_power_domain(power, i, power_domain_names[i]);
++
++ for (i = 0; i < ARRAY_SIZE(domain_deps); i++) {
++ pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base,
++ &power->domains[domain_deps[i].child].base);
++ }
++
++ power->reset.owner = THIS_MODULE;
++ power->reset.nr_resets = BCM2835_RESET_COUNT;
++ power->reset.ops = &bcm2835_reset_ops;
++ power->reset.of_node = dev->parent->of_node;
++
++ ret = devm_reset_controller_register(dev, &power->reset);
++ if (ret)
++ return ret;
++
++ of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate);
++
++ dev_info(dev, "Broadcom BCM2835 power domains driver");
++ return 0;
++}
++
++static int bcm2835_power_remove(struct platform_device *pdev)
++{
++ return 0;
++}
++
++static struct platform_driver bcm2835_power_driver = {
++ .probe = bcm2835_power_probe,
++ .remove = bcm2835_power_remove,
++ .driver = {
++ .name = "bcm2835-power",
++ },
++};
++module_platform_driver(bcm2835_power_driver);
++
++MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
++MODULE_DESCRIPTION("Driver for Broadcom BCM2835 PM power domains and reset");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/include/dt-bindings/soc/bcm2835-pm.h
+@@ -0,0 +1,28 @@
++/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
++
++#ifndef _DT_BINDINGS_ARM_BCM2835_PM_H
++#define _DT_BINDINGS_ARM_BCM2835_PM_H
++
++#define BCM2835_POWER_DOMAIN_GRAFX 0
++#define BCM2835_POWER_DOMAIN_GRAFX_V3D 1
++#define BCM2835_POWER_DOMAIN_IMAGE 2
++#define BCM2835_POWER_DOMAIN_IMAGE_PERI 3
++#define BCM2835_POWER_DOMAIN_IMAGE_ISP 4
++#define BCM2835_POWER_DOMAIN_IMAGE_H264 5
++#define BCM2835_POWER_DOMAIN_USB 6
++#define BCM2835_POWER_DOMAIN_DSI0 7
++#define BCM2835_POWER_DOMAIN_DSI1 8
++#define BCM2835_POWER_DOMAIN_CAM0 9
++#define BCM2835_POWER_DOMAIN_CAM1 10
++#define BCM2835_POWER_DOMAIN_CCP2TX 11
++#define BCM2835_POWER_DOMAIN_HDMI 12
++
++#define BCM2835_POWER_DOMAIN_COUNT 13
++
++#define BCM2835_RESET_V3D 0
++#define BCM2835_RESET_ISP 1
++#define BCM2835_RESET_H264 2
++
++#define BCM2835_RESET_COUNT 3
++
++#endif /* _DT_BINDINGS_ARM_BCM2835_PM_H */
+--- a/include/linux/mfd/bcm2835-pm.h
++++ b/include/linux/mfd/bcm2835-pm.h
+@@ -8,6 +8,7 @@
+ struct bcm2835_pm {
+ struct device *dev;
+ void __iomem *base;
++ void __iomem *asb;
+ };
+
+ #endif /* BCM2835_MFD_PM_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 19:51:32 +0000