aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-4.19/950-0423-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-4.19/950-0423-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch')
-rw-r--r--target/linux/bcm27xx/patches-4.19/950-0423-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch91
1 files changed, 0 insertions, 91 deletions
diff --git a/target/linux/bcm27xx/patches-4.19/950-0423-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch b/target/linux/bcm27xx/patches-4.19/950-0423-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch
deleted file mode 100644
index 3766707063..0000000000
--- a/target/linux/bcm27xx/patches-4.19/950-0423-w1-ds2482-cosmetic-fixes-after-54865314f5a1.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 2bf6a79fb6555b5ebf21d03b1295e017804474c4 Mon Sep 17 00:00:00 2001
-From: Mariusz Bialonczyk <manio@skyboo.net>
-Date: Mon, 4 Mar 2019 12:23:36 +0100
-Subject: [PATCH] w1: ds2482: cosmetic fixes after 54865314f5a1
-
-commit 5cb27d30fc3a281e830a2099d520b469e2b82008 upstream.
-
-We have a helper function ds2482_calculate_config() which is calculating
-the config value, so just use it instead of passing the same variable
-in all calls to this function.
-
-Also fixes the placement of module parameters to match with:
-50fa2951bd74 (w1: Organize driver source to natural/common order)
-by Andrew F. Davis
-
-Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
-Cc: Andrew Worsley <amworsley@gmail.com>
-Cc: Andrew F. Davis <afd@ti.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/w1/masters/ds2482.c | 18 +++++++++++-------
- 1 file changed, 11 insertions(+), 7 deletions(-)
-
---- a/drivers/w1/masters/ds2482.c
-+++ b/drivers/w1/masters/ds2482.c
-@@ -37,6 +37,11 @@ module_param_named(active_pullup, ds2482
- MODULE_PARM_DESC(active_pullup, "Active pullup (apply to all buses): " \
- "0-disable, 1-enable (default)");
-
-+/* extra configurations - e.g. 1WS */
-+static int extra_config;
-+module_param(extra_config, int, S_IRUGO | S_IWUSR);
-+MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS");
-+
- /**
- * The DS2482 registers - there are 3 registers that are addressed by a read
- * pointer. The read pointer is set by the last command executed.
-@@ -70,8 +75,6 @@ MODULE_PARM_DESC(active_pullup, "Active
- #define DS2482_REG_CFG_PPM 0x02 /* presence pulse masking */
- #define DS2482_REG_CFG_APU 0x01 /* active pull-up */
-
--/* extra configurations - e.g. 1WS */
--static int extra_config;
-
- /**
- * Write and verify codes for the CHANNEL_SELECT command (DS2482-800 only).
-@@ -130,6 +133,8 @@ struct ds2482_data {
- */
- static inline u8 ds2482_calculate_config(u8 conf)
- {
-+ conf |= extra_config;
-+
- if (ds2482_active_pullup)
- conf |= DS2482_REG_CFG_APU;
-
-@@ -405,7 +410,7 @@ static u8 ds2482_w1_reset_bus(void *data
- /* If the chip did reset since detect, re-config it */
- if (err & DS2482_REG_STS_RST)
- ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG,
-- ds2482_calculate_config(extra_config));
-+ ds2482_calculate_config(0x00));
- }
-
- mutex_unlock(&pdev->access_lock);
-@@ -431,7 +436,8 @@ static u8 ds2482_w1_set_pullup(void *dat
- ds2482_wait_1wire_idle(pdev);
- /* note: it seems like both SPU and APU have to be set! */
- retval = ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG,
-- ds2482_calculate_config(extra_config|DS2482_REG_CFG_SPU|DS2482_REG_CFG_APU));
-+ ds2482_calculate_config(DS2482_REG_CFG_SPU |
-+ DS2482_REG_CFG_APU));
- ds2482_wait_1wire_idle(pdev);
- }
-
-@@ -484,7 +490,7 @@ static int ds2482_probe(struct i2c_clien
-
- /* Set all config items to 0 (off) */
- ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG,
-- ds2482_calculate_config(extra_config));
-+ ds2482_calculate_config(0x00));
-
- mutex_init(&data->access_lock);
-
-@@ -559,7 +565,5 @@ module_i2c_driver(ds2482_driver);
-
- MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
- MODULE_DESCRIPTION("DS2482 driver");
--module_param(extra_config, int, S_IRUGO | S_IWUSR);
--MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS");
-
- MODULE_LICENSE("GPL");