diff options
Diffstat (limited to 'target/linux/bcm27xx/patches-4.19/950-0170-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch')
| -rw-r--r-- | target/linux/bcm27xx/patches-4.19/950-0170-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch | 95 |
1 files changed, 95 insertions, 0 deletions
diff --git a/target/linux/bcm27xx/patches-4.19/950-0170-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch b/target/linux/bcm27xx/patches-4.19/950-0170-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch new file mode 100644 index 0000000000..26d36ea43c --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0170-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch @@ -0,0 +1,95 @@ +From f0a4354bf8d99532577a21bb99da792fe2691626 Mon Sep 17 00:00:00 2001 +From: Philipp Zabel <p.zabel@pengutronix.de> +Date: Thu, 21 Sep 2017 17:30:24 +0200 +Subject: [PATCH] media: tc358743: fix connected/active CSI-2 lane + reporting + +g_mbus_config was supposed to indicate all supported lane numbers, not +only the number of those currently in active use. Since the TC358743 +can dynamically reduce the number of active lanes if the required +bandwidth allows for it, report all lane numbers up to the connected +number of lanes as supported in pdata mode. +In device tree mode, do not report lane count and clock mode at all, as +the receiver driver can determine these from the device tree. + +To allow communicating the number of currently active lanes, add a new +bitfield to the v4l2_mbus_config flags. This is a temporary fix, to be +used only until a better solution is found. + +Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> +--- + drivers/media/i2c/tc358743.c | 30 ++++++++++++++++-------------- + include/media/v4l2-mediabus.h | 8 ++++++++ + 2 files changed, 24 insertions(+), 14 deletions(-) + +--- a/drivers/media/i2c/tc358743.c ++++ b/drivers/media/i2c/tc358743.c +@@ -1606,28 +1606,29 @@ static int tc358743_g_mbus_config(struct + struct v4l2_mbus_config *cfg) + { + struct tc358743_state *state = to_state(sd); ++ const u32 mask = V4L2_MBUS_CSI2_LANE_MASK; ++ ++ if (state->csi_lanes_in_use > state->bus.num_data_lanes) ++ return -EINVAL; + + cfg->type = V4L2_MBUS_CSI2; ++ cfg->flags = (state->csi_lanes_in_use << __ffs(mask)) & mask; ++ ++ /* In DT mode, only report the number of active lanes */ ++ if (sd->dev->of_node) ++ return 0; + +- /* Support for non-continuous CSI-2 clock is missing in the driver */ +- cfg->flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; ++ /* Support for non-continuous CSI-2 clock is missing in pdata mode */ ++ cfg->flags |= V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; + +- switch (state->csi_lanes_in_use) { +- case 1: ++ if (state->bus.num_data_lanes > 0) + cfg->flags |= V4L2_MBUS_CSI2_1_LANE; +- break; +- case 2: ++ if (state->bus.num_data_lanes > 1) + cfg->flags |= V4L2_MBUS_CSI2_2_LANE; +- break; +- case 3: ++ if (state->bus.num_data_lanes > 2) + cfg->flags |= V4L2_MBUS_CSI2_3_LANE; +- break; +- case 4: ++ if (state->bus.num_data_lanes > 3) + cfg->flags |= V4L2_MBUS_CSI2_4_LANE; +- break; +- default: +- return -EINVAL; +- } + + return 0; + } +@@ -2052,6 +2053,7 @@ static int tc358743_probe(struct i2c_cli + if (pdata) { + state->pdata = *pdata; + state->bus.flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; ++ state->bus.num_data_lanes = 4; + } else { + err = tc358743_probe_of(state); + if (err == -ENODEV) +--- a/include/media/v4l2-mediabus.h ++++ b/include/media/v4l2-mediabus.h +@@ -67,6 +67,14 @@ + V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE) + #define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \ + V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3) ++/* ++ * Number of lanes in use, 0 == use all available lanes (default) ++ * ++ * This is a temporary fix for devices that need to reduce the number of active ++ * lanes for certain modes, until g_mbus_config() can be replaced with a better ++ * solution. ++ */ ++#define V4L2_MBUS_CSI2_LANE_MASK (0xf << 10) + + /** + * enum v4l2_mbus_type - media bus type |