diff options
Diffstat (limited to 'target/linux/avr32/patches/100-git_sync.patch')
| -rw-r--r-- | target/linux/avr32/patches/100-git_sync.patch | 568 |
1 files changed, 284 insertions, 284 deletions
diff --git a/target/linux/avr32/patches/100-git_sync.patch b/target/linux/avr32/patches/100-git_sync.patch index 2f6291a7db..6c9fe1eb66 100644 --- a/target/linux/avr32/patches/100-git_sync.patch +++ b/target/linux/avr32/patches/100-git_sync.patch @@ -1,6 +1,6 @@ --- a/Documentation/serial/driver +++ b/Documentation/serial/driver -@@ -186,6 +186,17 @@ +@@ -186,6 +186,17 @@ hardware. Locking: port_sem taken. Interrupts: caller dependent. @@ -20,7 +20,7 @@ bits. Update read_status_mask and ignore_status_mask to indicate --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig -@@ -47,6 +47,9 @@ +@@ -47,6 +47,9 @@ config RWSEM_GENERIC_SPINLOCK config GENERIC_TIME def_bool y @@ -30,7 +30,7 @@ config RWSEM_XCHGADD_ALGORITHM def_bool n -@@ -70,6 +73,8 @@ +@@ -70,6 +73,8 @@ source "init/Kconfig" menu "System Type and features" @@ -39,7 +39,7 @@ config SUBARCH_AVR32B bool config MMU -@@ -83,6 +88,7 @@ +@@ -83,6 +88,7 @@ config PLATFORM_AT32AP select MMU select PERFORMANCE_COUNTERS select HAVE_GPIO_LIB @@ -47,7 +47,7 @@ # # CPU types -@@ -117,6 +123,9 @@ +@@ -117,6 +123,9 @@ endchoice if BOARD_ATSTK1000 source "arch/avr32/boards/atstk1000/Kconfig" endif @@ -57,7 +57,7 @@ choice prompt "Boot loader type" -@@ -142,6 +151,9 @@ +@@ -142,6 +151,9 @@ config PHYS_OFFSET source "kernel/Kconfig.preempt" @@ -67,7 +67,7 @@ config HAVE_ARCH_BOOTMEM_NODE def_bool n -@@ -180,6 +192,10 @@ +@@ -180,6 +192,10 @@ config NMI_DEBUGGING be dumped to the console when a Non-Maskable Interrupt happens. @@ -78,7 +78,7 @@ # FPU emulation goes here source "kernel/Kconfig.hz" -@@ -196,6 +212,11 @@ +@@ -196,6 +212,11 @@ endmenu menu "Power management options" @@ -92,7 +92,7 @@ source "drivers/cpufreq/Kconfig" --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile -@@ -32,6 +32,7 @@ +@@ -32,6 +32,7 @@ core-$(CONFIG_LOADER_U_BOOT) += arch/av core-y += arch/avr32/kernel/ core-y += arch/avr32/mm/ drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ @@ -131,7 +131,7 @@ /* Initialized by bootloader-specific startup code. */ struct tag *bootloader_tags __initdata; -@@ -37,11 +44,16 @@ +@@ -37,11 +44,16 @@ static struct eth_platform_data __initda static struct spi_board_info spi0_board_info[] __initdata = { { .modalias = "mtd_dataflash", @@ -149,7 +149,7 @@ /* * The next two functions should go away as the boot loader is * supposed to initialize the macb address registers with a valid -@@ -124,6 +136,7 @@ +@@ -124,6 +136,7 @@ static struct platform_device ngw_gpio_l } }; @@ -157,7 +157,7 @@ static struct i2c_gpio_platform_data i2c_gpio_data = { .sda_pin = GPIO_PIN_PA(6), .scl_pin = GPIO_PIN_PA(7), -@@ -139,6 +152,7 @@ +@@ -139,6 +152,7 @@ static struct platform_device i2c_gpio_d .platform_data = &i2c_gpio_data, }, }; @@ -165,7 +165,7 @@ static int __init atngw100_init(void) { -@@ -157,6 +171,7 @@ +@@ -157,6 +171,7 @@ static int __init atngw100_init(void) set_hw_addr(at32_add_device_eth(1, ð_data[1])); at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); @@ -173,7 +173,7 @@ at32_add_device_usba(0, NULL); for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) { -@@ -165,11 +180,15 @@ +@@ -165,11 +180,15 @@ static int __init atngw100_init(void) } platform_device_register(&ngw_gpio_leds); @@ -191,7 +191,7 @@ } --- a/arch/avr32/boards/atstk1000/Kconfig +++ b/arch/avr32/boards/atstk1000/Kconfig -@@ -18,6 +18,10 @@ +@@ -18,6 +18,10 @@ config BOARD_ATSTK1004 bool "ATSTK1004" select CPU_AT32AP7002 @@ -202,7 +202,7 @@ endchoice -@@ -102,4 +106,60 @@ +@@ -102,4 +106,60 @@ config BOARD_ATSTK1000_EXTDAC depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM default y @@ -265,7 +265,7 @@ endif # stk 1000 --- a/arch/avr32/boards/atstk1000/Makefile +++ b/arch/avr32/boards/atstk1000/Makefile -@@ -2,3 +2,4 @@ +@@ -2,3 +2,4 @@ obj-y += setup.o flash.o obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o @@ -363,7 +363,7 @@ struct eth_addr { u8 addr[6]; -@@ -83,6 +157,19 @@ +@@ -83,6 +157,19 @@ static struct spi_board_info spi1_board_ } }; #endif @@ -383,7 +383,7 @@ /* * The next two functions should go away as the boot loader is * supposed to initialize the macb address registers with a valid -@@ -212,6 +299,12 @@ +@@ -212,6 +299,12 @@ static int __init atstk1002_init(void) at32_add_system_devices(); @@ -396,7 +396,7 @@ #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM at32_add_device_usart(1); #else -@@ -228,16 +321,30 @@ +@@ -228,16 +321,30 @@ static int __init atstk1002_init(void) #ifdef CONFIG_BOARD_ATSTK100X_SPI1 at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif @@ -444,7 +444,7 @@ #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC static struct at73c213_board_info at73c213_data = { .ssc_id = 0, -@@ -59,6 +66,19 @@ +@@ -59,6 +66,19 @@ static struct spi_board_info spi1_board_ } }; #endif @@ -464,7 +464,7 @@ #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC static void __init atstk1003_setup_extdac(void) { -@@ -147,12 +167,22 @@ +@@ -147,12 +167,22 @@ static int __init atstk1003_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM @@ -504,7 +504,7 @@ #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC static struct at73c213_board_info at73c213_data = { .ssc_id = 0, -@@ -130,14 +137,23 @@ +@@ -130,14 +137,23 @@ static int __init atstk1004_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM @@ -542,7 +542,7 @@ # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y -@@ -13,10 +13,10 @@ +@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_TIME=y @@ -554,7 +554,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_BUG=y -@@ -37,17 +37,15 @@ +@@ -37,17 +37,15 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -575,7 +575,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y -@@ -61,11 +59,13 @@ +@@ -61,11 +59,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y @@ -589,7 +589,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -@@ -73,6 +73,14 @@ +@@ -73,6 +73,14 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -604,7 +604,7 @@ CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set -@@ -101,10 +109,15 @@ +@@ -101,10 +109,15 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" @@ -620,7 +620,7 @@ CONFIG_SUBARCH_AVR32B=y CONFIG_MMU=y CONFIG_PERFORMANCE_COUNTERS=y -@@ -113,6 +126,7 @@ +@@ -113,6 +126,7 @@ CONFIG_CPU_AT32AP700X=y CONFIG_CPU_AT32AP7000=y # CONFIG_BOARD_ATSTK1000 is not set CONFIG_BOARD_ATNGW100=y @@ -628,7 +628,7 @@ CONFIG_LOADER_U_BOOT=y # -@@ -121,6 +135,7 @@ +@@ -121,6 +135,7 @@ CONFIG_LOADER_U_BOOT=y # CONFIG_AP700X_32_BIT_SMC is not set CONFIG_AP700X_16_BIT_SMC=y # CONFIG_AP700X_8_BIT_SMC is not set @@ -636,7 +636,7 @@ CONFIG_LOAD_ADDRESS=0x10000000 CONFIG_ENTRY_ADDRESS=0x90000000 CONFIG_PHYS_OFFSET=0x10000000 -@@ -146,16 +161,26 @@ +@@ -146,16 +161,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set @@ -663,7 +663,7 @@ # # CPU Frequency scaling -@@ -164,9 +189,9 @@ +@@ -164,9 +189,9 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set # CONFIG_CPU_FREQ_STAT is not set @@ -675,7 +675,7 @@ # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -@@ -202,6 +227,7 @@ +@@ -202,6 +227,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set @@ -683,7 +683,7 @@ CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y -@@ -260,82 +286,33 @@ +@@ -260,82 +286,33 @@ CONFIG_IPV6_SIT=y # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -770,7 +770,7 @@ CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m -@@ -343,54 +320,25 @@ +@@ -343,54 +320,25 @@ CONFIG_IP_NF_TARGET_LOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -830,7 +830,7 @@ # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set -@@ -407,7 +355,6 @@ +@@ -407,7 +355,6 @@ CONFIG_LLC=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set @@ -838,7 +838,7 @@ # # Network testing -@@ -415,6 +362,7 @@ +@@ -415,6 +362,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set @@ -846,7 +846,7 @@ # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -@@ -531,11 +479,18 @@ +@@ -531,11 +479,18 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 @@ -868,7 +868,7 @@ # # SCSI device support -@@ -568,11 +523,13 @@ +@@ -568,11 +523,13 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set @@ -882,7 +882,7 @@ # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set -@@ -599,7 +556,6 @@ +@@ -599,7 +556,6 @@ CONFIG_PPPOE=m # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m @@ -890,7 +890,7 @@ # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set -@@ -633,6 +589,7 @@ +@@ -633,6 +589,7 @@ CONFIG_SLHC=m # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y @@ -898,7 +898,7 @@ # CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -@@ -640,8 +597,6 @@ +@@ -640,8 +597,6 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -907,7 +907,7 @@ # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -@@ -659,6 +614,7 @@ +@@ -659,6 +614,7 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # @@ -915,7 +915,7 @@ CONFIG_I2C_GPIO=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set -@@ -669,13 +625,12 @@ +@@ -669,13 +625,12 @@ CONFIG_I2C_GPIO=m # # Miscellaneous I2C Chip support # @@ -931,7 +931,7 @@ # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set -@@ -702,9 +657,27 @@ +@@ -702,9 +657,27 @@ CONFIG_SPI_ATMEL=y # CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set @@ -959,7 +959,7 @@ CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set -@@ -757,10 +730,6 @@ +@@ -757,10 +730,6 @@ CONFIG_USB_SUPPORT=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -970,7 +970,7 @@ CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set -@@ -787,21 +756,24 @@ +@@ -787,21 +756,24 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set @@ -997,7 +997,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y -@@ -844,19 +816,22 @@ +@@ -844,19 +816,22 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set @@ -1022,7 +1022,7 @@ # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set -@@ -874,25 +849,23 @@ +@@ -874,25 +849,23 @@ CONFIG_RTC_DRV_AT32AP700X=y # # File systems # @@ -1052,7 +1052,7 @@ # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m -@@ -923,7 +896,7 @@ +@@ -923,7 +896,7 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set @@ -1061,7 +1061,7 @@ # # Miscellaneous filesystems -@@ -948,8 +921,10 @@ +@@ -948,8 +921,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -1072,7 +1072,7 @@ # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -@@ -1030,11 +1005,6 @@ +@@ -1030,11 +1005,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set @@ -1084,7 +1084,7 @@ # # Kernel hacking -@@ -1053,6 +1023,7 @@ +@@ -1053,6 +1023,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set @@ -1092,7 +1092,7 @@ # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set -@@ -1069,9 +1040,10 @@ +@@ -1069,9 +1040,10 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -1104,7 +1104,7 @@ # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set -@@ -1084,7 +1056,9 @@ +@@ -1084,7 +1056,9 @@ CONFIG_FRAME_POINTER=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y @@ -1114,7 +1114,7 @@ CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y -@@ -1103,6 +1077,9 @@ +@@ -1103,6 +1077,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set @@ -1124,7 +1124,7 @@ # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set -@@ -1117,12 +1094,14 @@ +@@ -1117,12 +1094,14 @@ CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set @@ -1140,7 +1140,7 @@ CONFIG_CRYPTO_HW=y # -@@ -1137,10 +1116,7 @@ +@@ -1137,10 +1116,7 @@ CONFIG_CRC7=m # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y @@ -1164,7 +1164,7 @@ # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y -@@ -13,10 +13,10 @@ +@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_TIME=y @@ -1176,7 +1176,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_BUG=y -@@ -36,15 +36,15 @@ +@@ -36,15 +36,15 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -1195,7 +1195,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y -@@ -58,11 +58,13 @@ +@@ -58,11 +58,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y @@ -1209,7 +1209,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -@@ -70,6 +72,14 @@ +@@ -70,6 +72,14 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -1224,7 +1224,7 @@ CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set -@@ -98,10 +108,15 @@ +@@ -98,10 +108,15 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" @@ -1240,7 +1240,7 @@ CONFIG_SUBARCH_AVR32B=y CONFIG_MMU=y CONFIG_PERFORMANCE_COUNTERS=y -@@ -113,12 +128,16 @@ +@@ -113,12 +128,16 @@ CONFIG_BOARD_ATSTK1000=y CONFIG_BOARD_ATSTK1002=y # CONFIG_BOARD_ATSTK1003 is not set # CONFIG_BOARD_ATSTK1004 is not set @@ -1257,7 +1257,7 @@ CONFIG_LOADER_U_BOOT=y # -@@ -127,6 +146,7 @@ +@@ -127,6 +146,7 @@ CONFIG_LOADER_U_BOOT=y # CONFIG_AP700X_32_BIT_SMC is not set CONFIG_AP700X_16_BIT_SMC=y # CONFIG_AP700X_8_BIT_SMC is not set @@ -1265,7 +1265,7 @@ CONFIG_LOAD_ADDRESS=0x10000000 CONFIG_ENTRY_ADDRESS=0x90000000 CONFIG_PHYS_OFFSET=0x10000000 -@@ -152,16 +172,26 @@ +@@ -152,16 +172,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set @@ -1292,7 +1292,7 @@ # # CPU Frequency scaling -@@ -170,9 +200,9 @@ +@@ -170,9 +200,9 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set # CONFIG_CPU_FREQ_STAT is not set @@ -1304,7 +1304,7 @@ # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -@@ -208,6 +238,7 @@ +@@ -208,6 +238,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set @@ -1312,7 +1312,7 @@ CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y -@@ -279,6 +310,7 @@ +@@ -279,6 +310,7 @@ CONFIG_LLC=m # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set @@ -1320,7 +1320,7 @@ # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -@@ -395,13 +427,18 @@ +@@ -395,13 +427,18 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 @@ -1341,7 +1341,7 @@ # # SCSI device support -@@ -444,6 +481,7 @@ +@@ -444,6 +481,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set @@ -1349,7 +1349,7 @@ CONFIG_PATA_AT32=m # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set -@@ -469,11 +507,13 @@ +@@ -469,11 +507,13 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set @@ -1363,7 +1363,7 @@ # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set -@@ -500,7 +540,6 @@ +@@ -500,7 +540,6 @@ CONFIG_PPP_BSDCOMP=m # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m @@ -1371,7 +1371,7 @@ # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set -@@ -568,6 +607,7 @@ +@@ -568,6 +607,7 @@ CONFIG_MOUSE_GPIO=m # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y @@ -1379,7 +1379,7 @@ # CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -@@ -575,8 +615,6 @@ +@@ -575,8 +615,6 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -1388,7 +1388,7 @@ # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -@@ -594,6 +632,7 @@ +@@ -594,6 +632,7 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # @@ -1396,7 +1396,7 @@ CONFIG_I2C_GPIO=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set -@@ -604,13 +643,12 @@ +@@ -604,13 +643,12 @@ CONFIG_I2C_GPIO=m # # Miscellaneous I2C Chip support # @@ -1412,7 +1412,7 @@ # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set -@@ -637,9 +675,27 @@ +@@ -637,9 +675,27 @@ CONFIG_SPI_ATMEL=y # CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set @@ -1440,7 +1440,7 @@ CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set -@@ -732,12 +788,18 @@ +@@ -732,12 +788,18 @@ CONFIG_SND_PCM_OSS_PLUGINS=y # # Generic devices # @@ -1459,7 +1459,7 @@ # SPI devices # CONFIG_SND_AT73C213=m -@@ -753,9 +815,14 @@ +@@ -753,9 +815,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000 # # @@ -1474,7 +1474,7 @@ # CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set -@@ -765,10 +832,6 @@ +@@ -765,10 +832,6 @@ CONFIG_USB_SUPPORT=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -1485,7 +1485,7 @@ CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set -@@ -796,27 +859,31 @@ +@@ -796,27 +859,31 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set @@ -1519,7 +1519,7 @@ CONFIG_LEDS_GPIO=m # -@@ -853,19 +920,22 @@ +@@ -853,19 +920,22 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set @@ -1544,7 +1544,7 @@ # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set -@@ -883,13 +953,13 @@ +@@ -883,13 +953,13 @@ CONFIG_RTC_DRV_AT32AP700X=y # # File systems # @@ -1561,7 +1561,7 @@ # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -@@ -897,12 +967,10 @@ +@@ -897,12 +967,10 @@ CONFIG_JBD=m # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set @@ -1575,7 +1575,7 @@ # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m -@@ -933,7 +1001,7 @@ +@@ -933,7 +1001,7 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set @@ -1584,7 +1584,7 @@ # # Miscellaneous filesystems -@@ -957,8 +1025,10 @@ +@@ -957,8 +1025,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -1595,7 +1595,7 @@ # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -@@ -1028,11 +1098,6 @@ +@@ -1028,11 +1098,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set @@ -1607,7 +1607,7 @@ # # Kernel hacking -@@ -1051,6 +1116,7 @@ +@@ -1051,6 +1116,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set @@ -1615,7 +1615,7 @@ # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set -@@ -1067,9 +1133,10 @@ +@@ -1067,9 +1133,10 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -1627,7 +1627,7 @@ # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set -@@ -1082,7 +1149,9 @@ +@@ -1082,7 +1149,9 @@ CONFIG_FORCED_INLINING=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=m @@ -1637,7 +1637,7 @@ CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_HMAC=m -@@ -1101,6 +1170,9 @@ +@@ -1101,6 +1170,9 @@ CONFIG_CRYPTO_CBC=m # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set @@ -1647,7 +1647,7 @@ # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_FCRYPT is not set -@@ -1115,12 +1187,14 @@ +@@ -1115,12 +1187,14 @@ CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set @@ -1663,7 +1663,7 @@ # CONFIG_CRYPTO_HW is not set # -@@ -1135,6 +1209,7 @@ +@@ -1135,6 +1209,7 @@ CONFIG_CRC7=m # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y @@ -1683,7 +1683,7 @@ # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y -@@ -13,10 +13,10 @@ +@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_TIME=y @@ -1695,7 +1695,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_BUG=y -@@ -39,17 +39,15 @@ +@@ -39,17 +39,15 @@ CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y # CONFIG_TASK_XACCT is not set @@ -1716,7 +1716,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y -@@ -63,11 +61,13 @@ +@@ -63,11 +61,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y @@ -1730,7 +1730,7 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -@@ -75,6 +75,14 @@ +@@ -75,6 +75,14 @@ CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -1745,7 +1745,7 @@ CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set -@@ -103,10 +111,15 @@ +@@ -103,10 +111,15 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" @@ -1761,7 +1761,7 @@ CONFIG_SUBARCH_AVR32B=y CONFIG_MMU=y CONFIG_PERFORMANCE_COUNTERS=y -@@ -118,12 +131,16 @@ +@@ -118,12 +131,16 @@ CONFIG_BOARD_ATSTK1000=y # CONFIG_BOARD_ATSTK1002 is not set CONFIG_BOARD_ATSTK1003=y # CONFIG_BOARD_ATSTK1004 is not set @@ -1778,7 +1778,7 @@ CONFIG_LOADER_U_BOOT=y # -@@ -132,6 +149,7 @@ +@@ -132,6 +149,7 @@ CONFIG_LOADER_U_BOOT=y # CONFIG_AP700X_32_BIT_SMC is not set CONFIG_AP700X_16_BIT_SMC=y # CONFIG_AP700X_8_BIT_SMC is not set @@ -1786,7 +1786,7 @@ CONFIG_LOAD_ADDRESS=0x10000000 CONFIG_ENTRY_ADDRESS=0x90000000 CONFIG_PHYS_OFFSET=0x10000000 -@@ -157,16 +175,26 @@ +@@ -157,16 +175,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set @@ -1813,7 +1813,7 @@ # # CPU Frequency scaling -@@ -175,9 +203,9 @@ +@@ -175,9 +203,9 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set # CONFIG_CPU_FREQ_STAT is not set @@ -1825,7 +1825,7 @@ # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -@@ -260,6 +288,7 @@ +@@ -260,6 +288,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set @@ -1833,7 +1833,7 @@ # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -@@ -376,13 +405,18 @@ +@@ -376,13 +405,18 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 @@ -1854,7 +1854,7 @@ # # SCSI device support -@@ -427,6 +461,7 @@ +@@ -427,6 +461,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set @@ -1862,7 +1862,7 @@ CONFIG_PATA_AT32=m # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set -@@ -460,7 +495,6 @@ +@@ -460,7 +495,6 @@ CONFIG_PPP_BSDCOMP=m # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m @@ -1870,7 +1870,7 @@ # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set -@@ -528,6 +562,7 @@ +@@ -528,6 +562,7 @@ CONFIG_MOUSE_GPIO=m # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y @@ -1878,7 +1878,7 @@ # CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -@@ -535,8 +570,6 @@ +@@ -535,8 +570,6 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -1887,7 +1887,7 @@ # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -@@ -554,6 +587,7 @@ +@@ -554,6 +587,7 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # @@ -1895,7 +1895,7 @@ CONFIG_I2C_GPIO=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set -@@ -564,13 +598,12 @@ +@@ -564,13 +598,12 @@ CONFIG_I2C_GPIO=m # # Miscellaneous I2C Chip support # @@ -1911,7 +1911,7 @@ # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set -@@ -597,9 +630,27 @@ +@@ -597,9 +630,27 @@ CONFIG_SPI_ATMEL=y # CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set @@ -1939,7 +1939,7 @@ CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set -@@ -665,12 +716,18 @@ +@@ -665,12 +716,18 @@ CONFIG_SND_VERBOSE_PROCFS=y # # Generic devices # @@ -1958,7 +1958,7 @@ # SPI devices # CONFIG_SND_AT73C213=m -@@ -686,9 +743,14 @@ +@@ -686,9 +743,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000 # # @@ -1973,7 +1973,7 @@ # CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set -@@ -698,10 +760,6 @@ +@@ -698,10 +760,6 @@ CONFIG_USB_SUPPORT=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -1984,7 +1984,7 @@ CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set -@@ -729,27 +787,31 @@ +@@ -729,27 +787,31 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set @@ -2018,7 +2018,7 @@ CONFIG_LEDS_GPIO=y # -@@ -786,19 +848,22 @@ +@@ -786,19 +848,22 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set @@ -2043,7 +2043,7 @@ # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set -@@ -816,13 +881,13 @@ +@@ -816,13 +881,13 @@ CONFIG_UIO=m # # File systems # @@ -2060,7 +2060,7 @@ # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -@@ -830,12 +895,10 @@ +@@ -830,12 +895,10 @@ CONFIG_JBD=m # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set @@ -2074,7 +2074,7 @@ # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m -@@ -866,7 +929,7 @@ +@@ -866,7 +929,7 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set @@ -2083,7 +2083,7 @@ # # Miscellaneous filesystems -@@ -891,8 +954,10 @@ +@@ -891,8 +954,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -2094,7 +2094,7 @@ # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set -@@ -943,11 +1008,6 @@ +@@ -943,11 +1008,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set @@ -2106,7 +2106,7 @@ # # Kernel hacking -@@ -965,6 +1025,7 @@ +@@ -965,6 +1025,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -2114,7 +2114,7 @@ # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set -@@ -981,9 +1042,10 @@ +@@ -981,9 +1042,10 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -2126,7 +2126,7 @@ # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set -@@ -1009,6 +1071,7 @@ +@@ -1009,6 +1071,7 @@ CONFIG_CRC7=m CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y @@ -2146,7 +2146,7 @@ # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y -@@ -13,10 +13,10 @@ +@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_TIME=y @@ -2158,7 +2158,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_BUG=y -@@ -34,15 +34,15 @@ +@@ -34,15 +34,15 @@ CONFIG_LOCALVERSION="" # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -2177,7 +2177,7 @@ # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -@@ -54,24 +54,37 @@ +@@ -54,24 +54,37 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y @@ -2215,7 +2215,7 @@ CONFIG_SUBARCH_AVR32B=y CONFIG_MMU=y CONFIG_PERFORMANCE_COUNTERS=y -@@ -83,10 +96,14 @@ +@@ -83,10 +96,14 @@ CONFIG_BOARD_ATSTK1000=y # CONFIG_BOARD_ATSTK1002 is not set # CONFIG_BOARD_ATSTK1003 is not set CONFIG_BOARD_ATSTK1004=y @@ -2230,7 +2230,7 @@ CONFIG_LOADER_U_BOOT=y # -@@ -95,6 +112,7 @@ +@@ -95,6 +112,7 @@ CONFIG_LOADER_U_BOOT=y # CONFIG_AP700X_32_BIT_SMC is not set CONFIG_AP700X_16_BIT_SMC=y # CONFIG_AP700X_8_BIT_SMC is not set @@ -2238,7 +2238,7 @@ CONFIG_LOAD_ADDRESS=0x10000000 CONFIG_ENTRY_ADDRESS=0x90000000 CONFIG_PHYS_OFFSET=0x10000000 -@@ -120,34 +138,26 @@ +@@ -120,34 +138,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set @@ -2279,7 +2279,7 @@ # # Bus options -@@ -222,6 +232,7 @@ +@@ -222,6 +232,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set @@ -2287,7 +2287,7 @@ # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -@@ -321,6 +332,7 @@ +@@ -321,6 +332,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set # CONFIG_MISC_DEVICES is not set @@ -2295,7 +2295,7 @@ # # SCSI device support -@@ -358,6 +370,7 @@ +@@ -358,6 +370,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y @@ -2303,7 +2303,7 @@ # CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -@@ -365,8 +378,6 @@ +@@ -365,8 +378,6 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -2312,7 +2312,7 @@ # CONFIG_R3964 is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set -@@ -389,9 +400,24 @@ +@@ -389,9 +400,24 @@ CONFIG_SPI_ATMEL=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set @@ -2337,7 +2337,7 @@ CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set -@@ -471,10 +497,6 @@ +@@ -471,10 +497,6 @@ CONFIG_USB_SUPPORT=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -2348,7 +2348,7 @@ CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y -@@ -499,7 +521,9 @@ +@@ -499,7 +521,9 @@ CONFIG_USB_ETH=y # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set @@ -2358,7 +2358,7 @@ # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y -@@ -519,15 +543,17 @@ +@@ -519,15 +543,17 @@ CONFIG_RTC_INTF_DEV=y # # SPI RTC drivers # @@ -2378,7 +2378,7 @@ # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set -@@ -545,9 +571,9 @@ +@@ -545,9 +571,9 @@ CONFIG_RTC_DRV_AT32AP700X=y # # File systems # @@ -2389,7 +2389,7 @@ # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set -@@ -580,7 +606,6 @@ +@@ -580,7 +606,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NETWORK_FILESYSTEMS is not set # CONFIG_NLS is not set # CONFIG_DLM is not set @@ -2397,7 +2397,7 @@ # # Kernel hacking -@@ -616,6 +641,7 @@ +@@ -616,6 +641,7 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y @@ -4458,7 +4458,7 @@ +#endif /* __AVR32_DW_DMAC_H__ */ --- a/arch/avr32/kernel/Makefile +++ b/arch/avr32/kernel/Makefile -@@ -9,6 +9,7 @@ +@@ -9,6 +9,7 @@ obj-y += syscall_table.o syscall-stub obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o obj-y += signal.o sys_avr32.o process.o time.o obj-y += init_task.o switch_to.o cpu.o @@ -4468,7 +4468,7 @@ obj-$(CONFIG_STACKTRACE) += stacktrace.o --- a/arch/avr32/kernel/avr32_ksyms.c +++ b/arch/avr32/kernel/avr32_ksyms.c -@@ -29,7 +29,9 @@ +@@ -29,7 +29,9 @@ EXPORT_SYMBOL(__avr32_asr64); */ EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcpy); @@ -4478,7 +4478,7 @@ /* * Userspace access stuff. -@@ -41,6 +43,8 @@ +@@ -41,6 +43,8 @@ EXPORT_SYMBOL(strncpy_from_user); EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(clear_user); EXPORT_SYMBOL(__clear_user); @@ -4526,7 +4526,7 @@ +EXPORT_SYMBOL(find_dma_controller); --- a/arch/avr32/kernel/entry-avr32b.S +++ b/arch/avr32/kernel/entry-avr32b.S -@@ -74,50 +74,41 @@ +@@ -74,50 +74,41 @@ exception_vectors: .align 2 bral do_dtlb_modified @@ -4588,7 +4588,7 @@ /* Second level lookup */ ld.w r2, r3[r1 << 2] -@@ -148,16 +139,55 @@ +@@ -148,16 +139,55 @@ pgtbl_lookup: tlbmiss_restore rete @@ -4647,7 +4647,7 @@ system_call: #ifdef CONFIG_PREEMPT mask_interrupts -@@ -266,18 +296,6 @@ +@@ -266,18 +296,6 @@ syscall_exit_work: brcc syscall_exit_cont rjmp enter_monitor_mode @@ -4666,7 +4666,7 @@ /* This function expects to find offending PC in SYSREG_RAR_EX */ .type save_full_context_ex, @function .align 2 -@@ -741,26 +759,6 @@ +@@ -741,26 +759,6 @@ irq_level\level: .section .irq.text,"ax",@progbits @@ -4709,7 +4709,7 @@ /* * This file handles the architecture-dependent parts of process handling.. */ -@@ -54,6 +54,8 @@ +@@ -54,6 +54,8 @@ void machine_halt(void) void machine_power_off(void) { @@ -4720,7 +4720,7 @@ void machine_restart(char *cmd) --- a/arch/avr32/kernel/setup.c +++ b/arch/avr32/kernel/setup.c -@@ -274,6 +274,8 @@ +@@ -274,6 +274,8 @@ static int __init early_parse_fbmem(char printk(KERN_WARNING "Failed to allocate framebuffer memory\n"); fbmem_size = 0; @@ -4731,7 +4731,7 @@ --- a/arch/avr32/kernel/signal.c +++ b/arch/avr32/kernel/signal.c -@@ -93,6 +93,9 @@ +@@ -93,6 +93,9 @@ asmlinkage int sys_rt_sigreturn(struct p if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) goto badframe; @@ -5067,7 +5067,7 @@ -device_initcall(init_timer_sysfs); --- a/arch/avr32/kernel/vmlinux.lds.S +++ b/arch/avr32/kernel/vmlinux.lds.S -@@ -68,14 +68,6 @@ +@@ -68,14 +68,6 @@ SECTIONS _evba = .; _text = .; *(.ex.text) @@ -5082,7 +5082,7 @@ *(.irq.text) KPROBES_TEXT TEXT_TEXT -@@ -107,6 +99,10 @@ +@@ -107,6 +99,10 @@ SECTIONS */ *(.data.init_task) @@ -5095,7 +5095,7 @@ *(.data.cacheline_aligned) --- a/arch/avr32/lib/io-readsb.S +++ b/arch/avr32/lib/io-readsb.S -@@ -41,7 +41,7 @@ +@@ -41,7 +41,7 @@ __raw_readsb: 2: sub r10, -4 reteq r12 @@ -5106,7 +5106,7 @@ brne 3b --- a/arch/avr32/mach-at32ap/Kconfig +++ b/arch/avr32/mach-at32ap/Kconfig -@@ -26,6 +26,13 @@ +@@ -26,6 +26,13 @@ config AP700X_8_BIT_SMC endchoice @@ -5218,7 +5218,7 @@ #include <video/atmel_lcdc.h> -@@ -91,25 +94,18 @@ +@@ -91,25 +94,18 @@ static struct clk devname##_##_name = { static DEFINE_SPINLOCK(pm_lock); @@ -5247,7 +5247,7 @@ div = PM_BFEXT(PLLDIV, control) + 1; mul = PM_BFEXT(PLLMUL, control) + 1; -@@ -120,6 +116,71 @@ +@@ -120,6 +116,71 @@ static unsigned long pll_get_rate(struct return rate; } @@ -5319,7 +5319,7 @@ static unsigned long pll0_get_rate(struct clk *clk) { u32 control; -@@ -129,6 +190,41 @@ +@@ -129,6 +190,41 @@ static unsigned long pll0_get_rate(struc return pll_get_rate(clk, control); } @@ -5361,7 +5361,7 @@ static unsigned long pll1_get_rate(struct clk *clk) { u32 control; -@@ -138,6 +234,49 @@ +@@ -138,6 +234,49 @@ static unsigned long pll1_get_rate(struc return pll_get_rate(clk, control); } @@ -5411,7 +5411,7 @@ /* * The AT32AP7000 has five primary clock sources: One 32kHz * oscillator, two crystal oscillators and two PLLs. -@@ -166,7 +305,10 @@ +@@ -166,7 +305,10 @@ static struct clk pll0 = { }; static struct clk pll1 = { .name = "pll1", @@ -5422,7 +5422,7 @@ .parent = &osc0, }; -@@ -534,6 +676,14 @@ +@@ -534,6 +676,14 @@ static struct clk hramc_clk = { .users = 1, .index = 3, }; @@ -5437,7 +5437,7 @@ static struct resource smc0_resource[] = { PBMEM(0xfff03400), -@@ -605,19 +755,32 @@ +@@ -605,19 +755,32 @@ static inline void set_ebi_sfr_bits(u32 } /* -------------------------------------------------------------------- @@ -5477,7 +5477,7 @@ /* -------------------------------------------------------------------- * PIO -@@ -669,7 +832,8 @@ +@@ -669,7 +832,8 @@ void __init at32_add_system_devices(void platform_device_register(&pdc_device); platform_device_register(&dmaca0_device); @@ -5487,7 +5487,7 @@ platform_device_register(&pio0_device); platform_device_register(&pio1_device); -@@ -679,6 +843,81 @@ +@@ -679,6 +843,81 @@ void __init at32_add_system_devices(void } /* -------------------------------------------------------------------- @@ -5569,7 +5569,7 @@ * USART * -------------------------------------------------------------------- */ -@@ -951,7 +1190,8 @@ +@@ -951,7 +1190,8 @@ at32_add_device_spi(unsigned int id, str switch (id) { case 0: pdev = &atmel_spi0_device; @@ -5579,7 +5579,7 @@ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */ at32_spi_setup_slaves(0, b, n, spi0_pins); -@@ -959,7 +1199,8 @@ +@@ -959,7 +1199,8 @@ at32_add_device_spi(unsigned int id, str case 1: pdev = &atmel_spi1_device; @@ -5589,7 +5589,7 @@ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */ at32_spi_setup_slaves(1, b, n, spi1_pins); -@@ -989,7 +1230,9 @@ +@@ -989,7 +1230,9 @@ static struct clk atmel_twi0_pclk = { .index = 2, }; @@ -5600,7 +5600,7 @@ { struct platform_device *pdev; -@@ -1009,6 +1252,9 @@ +@@ -1009,6 +1252,9 @@ struct platform_device *__init at32_add_ atmel_twi0_pclk.dev = &pdev->dev; @@ -5610,7 +5610,7 @@ platform_device_add(pdev); return pdev; -@@ -1032,7 +1278,8 @@ +@@ -1032,7 +1278,8 @@ static struct clk atmel_mci0_pclk = { .index = 9, }; @@ -5620,7 +5620,7 @@ { struct platform_device *pdev; -@@ -1041,11 +1288,15 @@ +@@ -1041,11 +1288,15 @@ struct platform_device *__init at32_add_ pdev = platform_device_alloc("atmel_mci", id); if (!pdev) @@ -5638,7 +5638,7 @@ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */ -@@ -1054,12 +1305,19 @@ +@@ -1054,12 +1305,19 @@ struct platform_device *__init at32_add_ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ @@ -5659,7 +5659,7 @@ platform_device_put(pdev); return NULL; } -@@ -1097,7 +1355,8 @@ +@@ -1097,7 +1355,8 @@ static struct clk atmel_lcdfb0_pixclk = struct platform_device *__init at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, @@ -5669,7 +5669,7 @@ { struct platform_device *pdev; struct atmel_lcdfb_info *info; -@@ -1124,37 +1383,77 @@ +@@ -1124,37 +1383,77 @@ at32_add_device_lcdc(unsigned int id, st switch (id) { case 0: pdev = &atmel_lcdfb0_device; @@ -5778,7 +5778,7 @@ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0); clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0)); -@@ -1351,9 +1650,39 @@ +@@ -1351,9 +1650,39 @@ static struct clk usba0_hclk = { .index = 6, }; @@ -5818,7 +5818,7 @@ struct platform_device *pdev; if (id != 0) -@@ -1367,13 +1696,20 @@ +@@ -1367,13 +1696,20 @@ at32_add_device_usba(unsigned int id, st ARRAY_SIZE(usba0_resource))) goto out_free_pdev; @@ -5845,7 +5845,7 @@ usba0_pclk.dev = &pdev->dev; usba0_hclk.dev = &pdev->dev; -@@ -1526,6 +1862,58 @@ +@@ -1526,6 +1862,58 @@ fail: #endif /* -------------------------------------------------------------------- @@ -5904,7 +5904,7 @@ * AC97C * -------------------------------------------------------------------- */ static struct resource atmel_ac97c0_resource[] __initdata = { -@@ -1540,9 +1928,11 @@ +@@ -1540,9 +1928,11 @@ static struct clk atmel_ac97c0_pclk = { .index = 10, }; @@ -5917,7 +5917,7 @@ if (id != 0) return NULL; -@@ -1553,19 +1943,37 @@ +@@ -1553,19 +1943,37 @@ struct platform_device *__init at32_add_ if (platform_device_add_resources(pdev, atmel_ac97c0_resource, ARRAY_SIZE(atmel_ac97c0_resource))) @@ -5961,7 +5961,7 @@ platform_device_put(pdev); return NULL; } -@@ -1683,6 +2091,7 @@ +@@ -1683,6 +2091,7 @@ struct clk *at32_clock_list[] = { &hmatrix_clk, &ebi_clk, &hramc_clk, @@ -5969,7 +5969,7 @@ &smc0_pclk, &smc0_mck, &pdc_hclk, -@@ -1694,7 +2103,10 @@ +@@ -1694,7 +2103,10 @@ struct clk *at32_clock_list[] = { &pio2_mck, &pio3_mck, &pio4_mck, @@ -5981,7 +5981,7 @@ &atmel_usart0_usart, &atmel_usart1_usart, &atmel_usart2_usart, -@@ -1730,16 +2142,7 @@ +@@ -1730,16 +2142,7 @@ struct clk *at32_clock_list[] = { }; unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list); @@ -5999,7 +5999,7 @@ { u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0; int i; -@@ -1794,4 +2197,36 @@ +@@ -1794,4 +2197,36 @@ void __init at32_clock_init(void) pm_writel(HSB_MASK, hsb_mask); pm_writel(PBA_MASK, pba_mask); pm_writel(PBB_MASK, pbb_mask); @@ -6038,7 +6038,7 @@ +core_initcall(sram_init); --- a/arch/avr32/mach-at32ap/cpufreq.c +++ b/arch/avr32/mach-at32ap/cpufreq.c -@@ -108,5 +108,4 @@ +@@ -108,5 +108,4 @@ static int __init at32_cpufreq_init(void { return cpufreq_register_driver(&at32_driver); } @@ -6623,7 +6623,7 @@ +late_initcall(gpio_dev_init); --- a/arch/avr32/mach-at32ap/hsmc.c +++ b/arch/avr32/mach-at32ap/hsmc.c -@@ -278,4 +278,4 @@ +@@ -278,4 +278,4 @@ static int __init hsmc_init(void) { return platform_driver_register(&hsmc_driver); } @@ -6662,7 +6662,7 @@ }; extern struct platform_device at32_intc0_device; -@@ -137,6 +142,74 @@ +@@ -137,6 +142,74 @@ fail: panic("Interrupt controller initialization failed!\n"); } @@ -6790,7 +6790,7 @@ +arch_initcall(pdc_init); --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c -@@ -157,6 +157,82 @@ +@@ -157,6 +157,82 @@ fail: dump_stack(); } @@ -6873,7 +6873,7 @@ /*--------------------------------------------------------------------------*/ /* GPIO API */ -@@ -318,6 +394,8 @@ +@@ -318,6 +394,8 @@ static void pio_bank_show(struct seq_fil const char *label; label = gpiochip_is_requested(chip, i); @@ -7653,7 +7653,7 @@ void show_mem(void) { int total = 0, reserved = 0, cached = 0; -@@ -109,19 +110,9 @@ +@@ -109,19 +110,9 @@ void __init paging_init(void) zero_page = alloc_bootmem_low_pages_node(NODE_DATA(0), PAGE_SIZE); @@ -7706,7 +7706,7 @@ cpu_sync_pipeline(); tlbehi = sysreg_read(TLBEHI); -@@ -33,15 +33,17 @@ +@@ -33,15 +33,17 @@ void show_dtlb_entry(unsigned int index) printk("%2u: %c %c %02x %05x %05x %o %o %c %c %c %c\n", index, @@ -7733,7 +7733,7 @@ sysreg_write(MMUCR, mmucr_save); sysreg_write(TLBEHI, tlbehi_save); -@@ -54,29 +56,33 @@ +@@ -54,29 +56,33 @@ void dump_dtlb(void) unsigned int i; printk("ID V G ASID VPN PFN AP SZ C B W D\n"); @@ -7780,7 +7780,7 @@ rp = 32 - fls(tlbar); if (rp == 32) { -@@ -84,30 +90,14 @@ +@@ -84,30 +90,14 @@ static inline void set_replacement_point sysreg_write(TLBARLO, -1L); } @@ -7813,7 +7813,7 @@ } void update_mmu_cache(struct vm_area_struct *vma, -@@ -120,39 +110,40 @@ +@@ -120,39 +110,40 @@ void update_mmu_cache(struct vm_area_str return; local_irq_save(flags); @@ -7870,7 +7870,7 @@ } } -@@ -190,17 +181,22 @@ +@@ -190,17 +181,22 @@ void flush_tlb_range(struct vm_area_stru local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; @@ -7895,7 +7895,7 @@ if (mm != current->mm) { saved_asid = get_asid(); set_asid(asid); -@@ -218,33 +214,34 @@ +@@ -218,33 +214,34 @@ void flush_tlb_range(struct vm_area_stru } /* @@ -7938,7 +7938,7 @@ } void flush_tlb_mm(struct mm_struct *mm) -@@ -280,7 +277,7 @@ +@@ -280,7 +277,7 @@ static void *tlb_start(struct seq_file * { static unsigned long tlb_index; @@ -7947,7 +7947,7 @@ return NULL; tlb_index = 0; -@@ -291,7 +288,7 @@ +@@ -291,7 +288,7 @@ static void *tlb_next(struct seq_file *t { unsigned long *index = v; @@ -7956,7 +7956,7 @@ return NULL; ++*pos; -@@ -313,16 +310,16 @@ +@@ -313,16 +310,16 @@ static int tlb_show(struct seq_file *tlb if (*index == 0) seq_puts(tlb, "ID V G ASID VPN PFN AP SZ C B W D\n"); @@ -7977,7 +7977,7 @@ cpu_sync_pipeline(); tlbehi = sysreg_read(TLBEHI); -@@ -334,16 +331,18 @@ +@@ -334,16 +331,18 @@ static int tlb_show(struct seq_file *tlb local_irq_restore(flags); seq_printf(tlb, "%2lu: %c %c %02x %05x %05x %o %o %c %c %c %c\n", @@ -8018,7 +8018,7 @@ --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig -@@ -706,7 +706,7 @@ +@@ -706,7 +706,7 @@ config NVRAM config RTC tristate "Enhanced Real Time Clock Support" @@ -8027,7 +8027,7 @@ ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you -@@ -776,7 +776,7 @@ +@@ -776,7 +776,7 @@ config SGI_IP27_RTC config GEN_RTC tristate "Generic /dev/rtc emulation" @@ -8038,7 +8038,7 @@ major number 10 and minor number 135 using mknod ("man mknod"), you --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c -@@ -1033,7 +1033,8 @@ +@@ -1033,7 +1033,8 @@ DECLARE_TASKLET_DISABLED(keyboard_taskle #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\ defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\ defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\ @@ -8362,7 +8362,7 @@ +arch_initcall(tcb_clksrc_init); --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -88,6 +88,14 @@ +@@ -88,6 +88,14 @@ config I2C_AT91 to support combined I2C messages. Use the i2c-gpio driver unless your system can cope with those limitations. @@ -8379,7 +8379,7 @@ depends on SOC_AU1550 || SOC_AU1200 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile -@@ -52,6 +52,7 @@ +@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o obj-$(CONFIG_SCx200_ACB) += scx200_acb.o obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o @@ -8948,7 +8948,7 @@ +#endif /* __ATMELTWI_H__ */ --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig -@@ -88,6 +88,17 @@ +@@ -88,6 +88,17 @@ config SERIO_RPCKBD To compile this driver as a module, choose M here: the module will be called rpckbd. @@ -8968,7 +8968,7 @@ depends on ARM_AMBA --- a/drivers/input/serio/Makefile +++ b/drivers/input/serio/Makefile -@@ -12,6 +12,7 @@ +@@ -12,6 +12,7 @@ obj-$(CONFIG_SERIO_CT82C710) += ct82c710 obj-$(CONFIG_SERIO_RPCKBD) += rpckbd.o obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o @@ -9417,7 +9417,7 @@ +#endif /* _AT32PSIF_H */ --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig -@@ -22,6 +22,39 @@ +@@ -22,6 +22,39 @@ config ATMEL_PWM purposes including software controlled power-efficent backlights on LCD displays, motor control, and waveform generation. @@ -9459,7 +9459,7 @@ depends on X86 && PCI && INPUT && EXPERIMENTAL --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile -@@ -10,6 +10,7 @@ +@@ -10,6 +10,7 @@ obj-$(CONFIG_ACER_WMI) += acer-wmi.o obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o @@ -9633,7 +9633,7 @@ +arch_initcall(tc_init); --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig -@@ -91,6 +91,16 @@ +@@ -91,6 +91,16 @@ config MMC_AT91 If unsure, say N. @@ -9652,7 +9652,7 @@ depends on ARCH_IMX --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile -@@ -15,6 +15,7 @@ +@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_AT91) += at91_mci.o @@ -11094,7 +11094,7 @@ +#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */ --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig -@@ -272,12 +272,54 @@ +@@ -272,12 +272,54 @@ config MTD_NAND_CS553X If you say "m", the module will be called "cs553x_nand.ko". @@ -11155,7 +11155,7 @@ tristate "Support for NAND Flash on CM-X270 modules" --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile -@@ -24,7 +24,7 @@ +@@ -24,7 +24,7 @@ obj-$(CONFIG_MTD_NAND_TS7250) += ts7250 obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o @@ -12097,14 +12097,14 @@ +#endif --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c -@@ -803,3 +803,4 @@ +@@ -803,3 +803,4 @@ module_exit(bf5xx_nand_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR(DRV_AUTHOR); MODULE_DESCRIPTION(DRV_DESC); +MODULE_ALIAS("platform:" DRV_NAME); --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c -@@ -317,3 +317,5 @@ +@@ -317,3 +317,5 @@ module_exit(ndfc_nand_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>"); MODULE_DESCRIPTION("Platform driver for NDFC"); @@ -12112,21 +12112,21 @@ +MODULE_ALIAS("platform:ndfc-nand"); --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c -@@ -169,3 +169,4 @@ +@@ -169,3 +169,4 @@ module_exit(orion_nand_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Tzachi Perelstein"); MODULE_DESCRIPTION("NAND glue for Orion platforms"); +MODULE_ALIAS("platform:orion_nand"); --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c -@@ -161,3 +161,4 @@ +@@ -161,3 +161,4 @@ module_exit(plat_nand_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Vitaly Wool"); MODULE_DESCRIPTION("Simple generic NAND driver"); +MODULE_ALIAS("platform:gen_nand"); --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c -@@ -927,3 +927,6 @@ +@@ -927,3 +927,6 @@ module_exit(s3c2410_nand_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); MODULE_DESCRIPTION("S3C24XX MTD NAND driver"); @@ -12135,7 +12135,7 @@ +MODULE_ALIAS("platform:s3c2440-nand"); --- a/drivers/net/macb.c +++ b/drivers/net/macb.c -@@ -1277,8 +1277,45 @@ +@@ -1277,8 +1277,45 @@ static int __exit macb_remove(struct pla return 0; } @@ -12183,7 +12183,7 @@ }, --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig -@@ -36,7 +36,7 @@ +@@ -36,7 +36,7 @@ if PARPORT config PARPORT_PC tristate "PC-style hardware" depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \ @@ -12194,7 +12194,7 @@ IBM PC compatible computers and some Alphas have PC-style --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig -@@ -277,6 +277,13 @@ +@@ -277,6 +277,13 @@ config ELECTRA_CF Say Y here to support the CompactFlash controller on the PA Semi Electra eval board. @@ -12210,7 +12210,7 @@ --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile -@@ -38,6 +38,7 @@ +@@ -38,6 +38,7 @@ obj-$(CONFIG_PCMCIA_VRC4173) += vrc417 obj-$(CONFIG_OMAP_CF) += omap_cf.o obj-$(CONFIG_AT91_CF) += at91_cf.o obj-$(CONFIG_ELECTRA_CF) += electra_cf.o @@ -12756,7 +12756,7 @@ +MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); --- a/drivers/rtc/rtc-at32ap700x.c +++ b/drivers/rtc/rtc-at32ap700x.c -@@ -262,6 +262,7 @@ +@@ -262,6 +262,7 @@ static int __init at32_rtc_probe(struct } platform_set_drvdata(pdev, rtc); @@ -12764,7 +12764,7 @@ dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n", (unsigned long)rtc->regs, rtc->irq); -@@ -281,6 +282,8 @@ +@@ -281,6 +282,8 @@ static int __exit at32_rtc_remove(struct { struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev); @@ -12775,7 +12775,7 @@ rtc_device_unregister(rtc->rtc); --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c -@@ -957,6 +957,20 @@ +@@ -957,6 +957,20 @@ static void atmel_shutdown(struct uart_p } /* @@ -12796,7 +12796,7 @@ * Power / Clock management. */ static void atmel_serial_pm(struct uart_port *port, unsigned int state, -@@ -1190,6 +1204,7 @@ +@@ -1190,6 +1204,7 @@ static struct uart_ops atmel_pops = { .break_ctl = atmel_break_ctl, .startup = atmel_startup, .shutdown = atmel_shutdown, @@ -12804,7 +12804,7 @@ .set_termios = atmel_set_termios, .type = atmel_type, .release_port = atmel_release_port, -@@ -1440,6 +1455,15 @@ +@@ -1440,6 +1455,15 @@ static struct uart_driver atmel_uart = { }; #ifdef CONFIG_PM @@ -12820,7 +12820,7 @@ static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state) { -@@ -1447,7 +1471,7 @@ +@@ -1447,7 +1471,7 @@ static int atmel_serial_suspend(struct p struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); if (device_may_wakeup(&pdev->dev) @@ -12831,7 +12831,7 @@ uart_suspend_port(&atmel_uart, port); --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c -@@ -552,6 +552,8 @@ +@@ -552,6 +552,8 @@ static void uart_flush_buffer(struct tty spin_lock_irqsave(&port->lock, flags); uart_circ_clear(&state->info->xmit); @@ -12842,7 +12842,7 @@ } --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c -@@ -51,9 +51,7 @@ +@@ -51,9 +51,7 @@ struct atmel_spi { u8 stopping; struct list_head queue; struct spi_transfer *current_transfer; @@ -12853,7 +12853,7 @@ void *buffer; dma_addr_t buffer_dma; -@@ -133,48 +131,6 @@ +@@ -133,48 +131,6 @@ static void cs_deactivate(struct atmel_s gpio_set_value(gpio, !active); } @@ -12902,7 +12902,7 @@ /* * Submit next transfer for DMA. * lock is held, spi irq is blocked -@@ -184,78 +140,53 @@ +@@ -184,78 +140,53 @@ static void atmel_spi_next_xfer(struct s { struct atmel_spi *as = spi_master_get_devdata(master); struct spi_transfer *xfer; @@ -13020,7 +13020,7 @@ * transfer because we need to handle some difficult timing * issues otherwise. If we wait for ENDTX in one transfer and * then starts waiting for ENDRX in the next, it's difficult -@@ -265,7 +196,17 @@ +@@ -265,7 +196,17 @@ static void atmel_spi_next_xfer(struct s * * It should be doable, though. Just not now... */ @@ -13038,7 +13038,7 @@ spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); } -@@ -363,7 +304,6 @@ +@@ -363,7 +304,6 @@ atmel_spi_msg_done(struct spi_master *ma spin_lock(&as->lock); as->current_transfer = NULL; @@ -13046,7 +13046,7 @@ /* continue if needed */ if (list_empty(&as->queue) || as->stopping) -@@ -447,7 +387,7 @@ +@@ -447,7 +387,7 @@ atmel_spi_interrupt(int irq, void *dev_i spi_writel(as, IDR, pending); @@ -13055,7 +13055,7 @@ msg->actual_length += xfer->len; if (!msg->is_dma_mapped) -@@ -457,7 +397,7 @@ +@@ -457,7 +397,7 @@ atmel_spi_interrupt(int irq, void *dev_i if (xfer->delay_usecs) udelay(xfer->delay_usecs); @@ -13066,7 +13066,7 @@ xfer->cs_change); --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig -@@ -118,10 +118,10 @@ +@@ -118,10 +118,10 @@ config USB_AMD5536UDC config USB_GADGET_ATMEL_USBA boolean "Atmel USBA" select USB_GADGET_DUALSPEED @@ -13097,7 +13097,7 @@ #ifdef CONFIG_USB_GADGET_DEBUG_FS #include <linux/debugfs.h> -@@ -324,53 +326,28 @@ +@@ -324,53 +326,28 @@ static int vbus_is_present(struct usba_u return 1; } @@ -13167,7 +13167,7 @@ static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req) { unsigned int transaction_len; -@@ -387,7 +364,7 @@ +@@ -387,7 +364,7 @@ static void next_fifo_transaction(struct ep->ep.name, req, transaction_len, req->last_transaction ? ", done" : ""); @@ -13176,7 +13176,7 @@ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); req->req.actual += transaction_len; } -@@ -476,7 +453,7 @@ +@@ -476,7 +453,7 @@ static void receive_data(struct usba_ep bytecount = req->req.length - req->req.actual; } @@ -13185,7 +13185,7 @@ ep->fifo, bytecount); req->req.actual += bytecount; -@@ -1029,33 +1006,6 @@ +@@ -1029,33 +1006,6 @@ static const struct usb_gadget_ops usba_ .set_selfpowered = usba_udc_set_selfpowered, }; @@ -13219,7 +13219,7 @@ static struct usb_endpoint_descriptor usba_ep0_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, -@@ -1074,7 +1024,6 @@ +@@ -1074,7 +1024,6 @@ static void nop_release(struct device *d static struct usba_udc the_udc = { .gadget = { .ops = &usba_udc_ops, @@ -13227,7 +13227,7 @@ .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list), .is_dualspeed = 1, .name = "atmel_usba_udc", -@@ -1231,7 +1180,7 @@ +@@ -1231,7 +1180,7 @@ static int do_test_mode(struct usba_udc } else { usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); usba_writel(udc, TST, USBA_TST_PKT_MODE); @@ -13236,7 +13236,7 @@ sizeof(test_packet_buffer)); usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); dev_info(dev, "Entering Test_Packet mode...\n"); -@@ -1530,13 +1479,13 @@ +@@ -1530,13 +1479,13 @@ restart: DBG(DBG_HW, "Packet length: %u\n", pkt_len); if (pkt_len != sizeof(crq)) { pr_warning("udc: Invalid packet length %u " @@ -13252,7 +13252,7 @@ /* Free up one bank in the FIFO so that we can * generate or receive a reply right away. */ -@@ -1688,6 +1637,7 @@ +@@ -1688,6 +1637,7 @@ static irqreturn_t usba_udc_irq(int irq, DBG(DBG_INT, "irq, status=%#08x\n", status); if (status & USBA_DET_SUSPEND) { @@ -13260,7 +13260,7 @@ usba_writel(udc, INT_CLR, USBA_DET_SUSPEND); DBG(DBG_BUS, "Suspend detected\n"); if (udc->gadget.speed != USB_SPEED_UNKNOWN -@@ -1699,6 +1649,7 @@ +@@ -1699,6 +1649,7 @@ static irqreturn_t usba_udc_irq(int irq, } if (status & USBA_WAKE_UP) { @@ -13268,7 +13268,7 @@ usba_writel(udc, INT_CLR, USBA_WAKE_UP); DBG(DBG_BUS, "Wake Up CPU detected\n"); } -@@ -1792,12 +1743,14 @@ +@@ -1792,12 +1743,14 @@ static irqreturn_t usba_vbus_irq(int irq vbus = gpio_get_value(udc->vbus_pin); if (vbus != udc->vbus_prev) { if (vbus) { @@ -13285,7 +13285,7 @@ spin_unlock(&udc->lock); udc->driver->disconnect(&udc->gadget); spin_lock(&udc->lock); -@@ -1850,7 +1803,8 @@ +@@ -1850,7 +1803,8 @@ int usb_gadget_register_driver(struct us /* If Vbus is present, enable the controller and wait for reset */ spin_lock_irqsave(&udc->lock, flags); if (vbus_is_present(udc) && udc->vbus_prev == 0) { @@ -13295,7 +13295,7 @@ usba_writel(udc, INT_ENB, USBA_END_OF_RESET); } spin_unlock_irqrestore(&udc->lock, flags); -@@ -1883,7 +1837,8 @@ +@@ -1883,7 +1837,8 @@ int usb_gadget_unregister_driver(struct spin_unlock_irqrestore(&udc->lock, flags); /* This will also disable the DP pullup */ @@ -13305,7 +13305,7 @@ driver->unbind(&udc->gadget); udc->gadget.dev.driver = NULL; -@@ -1908,7 +1863,7 @@ +@@ -1908,7 +1863,7 @@ static int __init usba_udc_probe(struct regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID); fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID); @@ -13314,7 +13314,7 @@ return -ENXIO; irq = platform_get_irq(pdev, 0); -@@ -1953,19 +1908,48 @@ +@@ -1953,19 +1908,48 @@ static int __init usba_udc_probe(struct /* Make sure we start from a clean slate */ clk_enable(pclk); @@ -13365,7 +13365,7 @@ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); } -@@ -1984,7 +1968,7 @@ +@@ -1984,7 +1968,7 @@ static int __init usba_udc_probe(struct goto err_device_add; } @@ -13374,7 +13374,7 @@ if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) { udc->vbus_pin = pdata->vbus_pin; -@@ -2004,7 +1988,7 @@ +@@ -2004,7 +1988,7 @@ static int __init usba_udc_probe(struct } usba_init_debugfs(udc); @@ -13383,7 +13383,7 @@ usba_ep_init_debugfs(udc, &usba_ep[i]); return 0; -@@ -2012,6 +1996,8 @@ +@@ -2012,6 +1996,8 @@ static int __init usba_udc_probe(struct err_device_add: free_irq(irq, udc); err_request_irq: @@ -13392,7 +13392,7 @@ iounmap(udc->fifo); err_map_fifo: iounmap(udc->regs); -@@ -2029,10 +2015,11 @@ +@@ -2029,10 +2015,11 @@ static int __exit usba_udc_remove(struct { struct usba_udc *udc; int i; @@ -13405,7 +13405,7 @@ usba_ep_cleanup_debugfs(&usba_ep[i]); usba_cleanup_debugfs(udc); -@@ -2040,6 +2027,7 @@ +@@ -2040,6 +2027,7 @@ static int __exit usba_udc_remove(struct gpio_free(udc->vbus_pin); free_irq(udc->irq, udc); @@ -13444,7 +13444,7 @@ static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo, struct fb_var_screeninfo *var) -@@ -176,7 +178,7 @@ +@@ -176,7 +178,7 @@ static struct fb_fix_screeninfo atmel_lc .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_TRUECOLOR, .xpanstep = 0, @@ -13453,7 +13453,7 @@ .ywrapstep = 0, .accel = FB_ACCEL_NONE, }; -@@ -250,6 +252,8 @@ +@@ -250,6 +252,8 @@ static int atmel_lcdfb_alloc_video_memor return -ENOMEM; } @@ -13462,7 +13462,7 @@ return 0; } -@@ -634,7 +638,6 @@ +@@ -634,7 +638,6 @@ static int __init atmel_lcdfb_init_fbinf struct fb_info *info = sinfo->info; int ret = 0; @@ -13470,7 +13470,7 @@ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW; dev_info(info->device, -@@ -764,6 +767,11 @@ +@@ -764,6 +767,11 @@ static int __init atmel_lcdfb_probe(stru info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len); if (!info->screen_base) goto release_intmem; @@ -13484,7 +13484,7 @@ ret = atmel_lcdfb_alloc_video_memory(sinfo); --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c -@@ -385,8 +385,6 @@ +@@ -385,8 +385,6 @@ __writeback_single_inode(struct inode *i * WB_SYNC_HOLD is a hack for sys_sync(): reattach the inode to sb->s_dirty so * that it can be located for waiting on in __writeback_single_inode(). * @@ -13493,7 +13493,7 @@ * If `bdi' is non-zero then we're being asked to writeback a specific queue. * This function assumes that the blockdev superblock's inodes are backed by * a variety of queues, so all inodes are searched. For other superblocks, -@@ -402,11 +400,12 @@ +@@ -402,11 +400,12 @@ __writeback_single_inode(struct inode *i * on the writer throttling path, and we get decent balancing between many * throttled threads: we don't want them all piling up on inode_sync_wait. */ @@ -13508,7 +13508,7 @@ if (!wbc->for_kupdate || list_empty(&sb->s_io)) queue_io(sb, wbc->older_than_this); -@@ -485,8 +484,16 @@ +@@ -485,8 +484,16 @@ sync_sb_inodes(struct super_block *sb, s if (!list_empty(&sb->s_more_io)) wbc->more_io = 1; } @@ -13525,7 +13525,7 @@ /* * Start writeback of dirty pagecache data against all unlocked inodes. -@@ -526,11 +533,8 @@ +@@ -526,11 +533,8 @@ restart: * be unmounted by the time it is released. */ if (down_read_trylock(&sb->s_umount)) { @@ -13538,7 +13538,7 @@ up_read(&sb->s_umount); } spin_lock(&sb_lock); -@@ -568,9 +572,7 @@ +@@ -568,9 +572,7 @@ void sync_inodes_sb(struct super_block * (inodes_stat.nr_inodes - inodes_stat.nr_unused) + nr_dirty + nr_unstable; wbc.nr_to_write += wbc.nr_to_write / 2; /* Bit more for luck */ @@ -13563,7 +13563,7 @@ /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */ void at32_add_system_devices(void); -@@ -36,11 +42,10 @@ +@@ -36,11 +42,10 @@ at32_add_device_spi(unsigned int id, str struct atmel_lcdfb_info; struct platform_device * at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, @@ -13578,7 +13578,7 @@ struct platform_device * at32_add_device_usba(unsigned int id, struct usba_platform_data *data); -@@ -68,9 +73,27 @@ +@@ -68,9 +73,27 @@ struct platform_device *at32_add_device_ struct platform_device * at32_add_device_ssc(unsigned int id, unsigned int flags); @@ -13609,7 +13609,7 @@ struct platform_device *at32_add_device_abdac(unsigned int id); struct cf_platform_data { -@@ -84,4 +107,20 @@ +@@ -84,4 +107,20 @@ struct platform_device * at32_add_device_cf(unsigned int id, unsigned int extint, struct cf_platform_data *data); @@ -13699,7 +13699,7 @@ +#endif /* __ASM_AVR32_ARCH_PM_H */ --- a/include/asm-avr32/arch-at32ap/portmux.h +++ b/include/asm-avr32/arch-at32ap/portmux.h -@@ -26,4 +26,16 @@ +@@ -26,4 +26,16 @@ void at32_select_periph(unsigned int pin void at32_select_gpio(unsigned int pin, unsigned long flags); void at32_reserve_pin(unsigned int pin); @@ -14339,7 +14339,7 @@ } #define __pte_free_tlb(tlb,pte) \ -@@ -75,6 +89,10 @@ +@@ -75,6 +89,10 @@ do { \ tlb_remove_page((tlb), pte); \ } while (0) @@ -14353,7 +14353,7 @@ #endif /* __ASM_AVR32_PGALLOC_H */ --- a/include/asm-avr32/pgtable.h +++ b/include/asm-avr32/pgtable.h -@@ -129,13 +129,6 @@ +@@ -129,13 +129,6 @@ extern struct page *empty_zero_page; #define _PAGE_FLAGS_CACHE_MASK (_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT) @@ -14367,7 +14367,7 @@ /* Flags that may be modified by software */ #define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \ | _PAGE_FLAGS_CACHE_MASK) -@@ -254,10 +247,14 @@ +@@ -254,10 +247,14 @@ static inline pte_t pte_mkyoung(pte_t pt } #define pmd_none(x) (!pmd_val(x)) @@ -14386,7 +14386,7 @@ /* * Permanent address of a page. We don't support highmem, so this is -@@ -295,19 +292,16 @@ +@@ -295,19 +292,16 @@ static inline pte_t pte_modify(pte_t pte #define page_pte(page) page_pte_prot(page, __pgprot(0)) @@ -14430,7 +14430,7 @@ +#endif /* _ASM_SERIAL_H */ --- a/include/asm-avr32/thread_info.h +++ b/include/asm-avr32/thread_info.h -@@ -88,6 +88,7 @@ +@@ -88,6 +88,7 @@ static inline struct thread_info *curren #define TIF_MEMDIE 6 #define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */ #define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */ @@ -14440,7 +14440,7 @@ --- a/include/asm-avr32/tlbflush.h +++ b/include/asm-avr32/tlbflush.h -@@ -26,7 +26,6 @@ +@@ -26,7 +26,6 @@ extern void flush_tlb_mm(struct mm_struc extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); @@ -14714,7 +14714,7 @@ +#endif --- a/include/linux/fs.h +++ b/include/linux/fs.h -@@ -1692,6 +1692,8 @@ +@@ -1692,6 +1692,8 @@ static inline void invalidate_remote_ino extern int invalidate_inode_pages2(struct address_space *mapping); extern int invalidate_inode_pages2_range(struct address_space *mapping, pgoff_t start, pgoff_t end); @@ -14725,7 +14725,7 @@ extern int filemap_flush(struct address_space *); --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h -@@ -188,6 +188,7 @@ +@@ -188,6 +188,7 @@ struct uart_ops { void (*break_ctl)(struct uart_port *, int ctl); int (*startup)(struct uart_port *); void (*shutdown)(struct uart_port *); @@ -14760,7 +14760,7 @@ +#endif /* __LINUX_USB_USBA_H */ --- a/mm/Kconfig +++ b/mm/Kconfig -@@ -187,7 +187,7 @@ +@@ -187,7 +187,7 @@ config BOUNCE config NR_QUICK int depends on QUICKLIST @@ -14771,7 +14771,7 @@ config VIRT_TO_BUS --- a/sound/Kconfig +++ b/sound/Kconfig -@@ -63,6 +63,8 @@ +@@ -63,6 +63,8 @@ source "sound/aoa/Kconfig" source "sound/arm/Kconfig" @@ -14782,7 +14782,7 @@ endif --- a/sound/Makefile +++ b/sound/Makefile -@@ -6,7 +6,7 @@ +@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw obj-$(CONFIG_SOUND_PRIME) += oss/ obj-$(CONFIG_DMASOUND) += oss/ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \ @@ -15841,7 +15841,7 @@ +#endif /* __SOUND_AVR32_AC97C_H */ --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig -@@ -654,3 +654,7 @@ +@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL int "DAC channel" default "1" depends on SOUND_SH_DAC_AUDIO @@ -15851,7 +15851,7 @@ + depends on SOUND_PRIME && AVR32 --- a/sound/oss/Makefile +++ b/sound/oss/Makefile -@@ -9,6 +9,7 @@ +@@ -9,6 +9,7 @@ obj-$(CONFIG_SOUND_OSS) += sound.o # Please leave it as is, cause the link order is significant ! @@ -16648,7 +16648,7 @@ +#endif /* __SOUND_OSS_AT32_ABDAC_H__ */ --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c -@@ -737,7 +737,7 @@ +@@ -737,7 +737,7 @@ cleanup: /* * Device functions */ @@ -16657,7 +16657,7 @@ { /* * Continuous clock output. -@@ -767,7 +767,7 @@ +@@ -767,7 +767,7 @@ static int snd_at73c213_ssc_init(struct return 0; } @@ -16666,7 +16666,7 @@ { int retval; unsigned char dac_ctrl = 0; -@@ -933,7 +933,7 @@ +@@ -933,7 +933,7 @@ out: return retval; } |