aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/au1000
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/au1000')
-rw-r--r--target/linux/au1000/patches-2.6.32/005-revert_mtx1_board_gpiolib.patch69
1 files changed, 69 insertions, 0 deletions
diff --git a/target/linux/au1000/patches-2.6.32/005-revert_mtx1_board_gpiolib.patch b/target/linux/au1000/patches-2.6.32/005-revert_mtx1_board_gpiolib.patch
new file mode 100644
index 0000000000..2cd7f9592b
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.32/005-revert_mtx1_board_gpiolib.patch
@@ -0,0 +1,69 @@
+commit 1cd692621e6d4b1f707039ea0b4e5ad3143312fb
+Author: Florian Fainelli <ffainelli@freebox.fr>
+Date: Thu Jul 1 10:02:53 2010 +0200
+
+ Revert "MIPS: Alchemy: MTX-1: Use linux gpio api."
+
+ This reverts commit b312ab3b5a86c8be5753cdf32ea429ba80651298.
+
+diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
+index cc32c69..8ed1ae1 100644
+--- a/arch/mips/alchemy/mtx-1/board_setup.c
++++ b/arch/mips/alchemy/mtx-1/board_setup.c
+@@ -28,7 +28,6 @@
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+-#include <linux/gpio.h>
+ #include <linux/init.h>
+
+ #include <asm/mach-au1x00/au1000.h>
+@@ -56,11 +55,10 @@ void __init board_setup(void)
+ }
+ #endif
+
+- alchemy_gpio2_enable();
+-
+ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* Enable USB power switch */
+- alchemy_gpio_direction_output(204, 0);
++ au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
++ au_writel(0x100000, GPIO2_OUTPUT);
+ #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+
+ #ifdef CONFIG_PCI
+@@ -76,14 +74,14 @@ void __init board_setup(void)
+
+ /* Initialize GPIO */
+ au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+- alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */
+- alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */
+- alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */
+- alchemy_gpio_direction_output(5, 0); /* Disable eth PHY TX_ER */
++ au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */
++ au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */
++ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
++ au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */
+
+ /* Enable LED and set it to green */
+- alchemy_gpio_direction_output(211, 1); /* green on */
+- alchemy_gpio_direction_output(212, 0); /* red off */
++ au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR);
++ au_writel(0x18000800, GPIO2_OUTPUT);
+
+ board_pci_idsel = mtx1_pci_idsel;
+
+@@ -103,10 +101,10 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
+
+ if (assert && devsel != 0)
+ /* Suppress signal to Cardbus */
+- gpio_set_value(1, 0); /* set EXT_IO3 OFF */
++ au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */
+ else
+- gpio_set_value(1, 1); /* set EXT_IO3 ON */
+-
++ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_sync_udelay(1);
+ return 1;
+ }
++