diff options
Diffstat (limited to 'target/linux/au1000/patches')
| -rw-r--r-- | target/linux/au1000/patches/001-au1x00_gpio.patch | 294 | ||||
| -rw-r--r-- | target/linux/au1000/patches/005-au1000_eth_link_beat.patch | 24 | ||||
| -rw-r--r-- | target/linux/au1000/patches/006-mtx1_system_button.patch | 241 | ||||
| -rw-r--r-- | target/linux/au1000/patches/011-mtx1_leds.patch | 28 | ||||
| -rw-r--r-- | target/linux/au1000/patches/012-mtx1_cmdline.patch | 19 | ||||
| -rw-r--r-- | target/linux/au1000/patches/013-openwrt_rootfs.patch | 11 | ||||
| -rw-r--r-- | target/linux/au1000/patches/014-au1000_eth_ioctl.patch | 15 | ||||
| -rw-r--r-- | target/linux/au1000/patches/015-pci-resource.patch | 14 | ||||
| -rw-r--r-- | target/linux/au1000/patches/016-pci-io_map.patch | 10 | ||||
| -rw-r--r-- | target/linux/au1000/patches/017-usb-power.patch | 11 |
10 files changed, 667 insertions, 0 deletions
diff --git a/target/linux/au1000/patches/001-au1x00_gpio.patch b/target/linux/au1000/patches/001-au1x00_gpio.patch new file mode 100644 index 0000000000..d4339aec46 --- /dev/null +++ b/target/linux/au1000/patches/001-au1x00_gpio.patch @@ -0,0 +1,294 @@ +diff -urN linux-2.6.21.1/arch/mips/au1000/common/gpio.c linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c +--- linux-2.6.21.1/arch/mips/au1000/common/gpio.c 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c 2007-05-22 21:41:55.000000000 +0200 +@@ -1,4 +1,7 @@ + /* ++ * Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org> ++ * Architecture specific GPIO support ++ * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your +@@ -18,101 +21,133 @@ + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * Notes : ++ * au1000 SoC have only one GPIO line : GPIO1 ++ * others have a second one : GPIO2 + */ ++ ++#include <linux/autoconf.h> ++#include <linux/init.h> ++#include <linux/types.h> + #include <linux/module.h> +-#include <au1000.h> +-#include <au1xxx_gpio.h> ++ ++#include <asm/addrspace.h> ++#include <asm/io.h> ++ ++#include <asm/mach-au1x00/au1000.h> ++#include <asm/gpio.h> + + #define gpio1 sys + #if !defined(CONFIG_SOC_AU1000) + static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE; ++#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 + +-#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 +- +-int au1xxx_gpio2_read(int signal) ++static int au1xxx_gpio2_read(unsigned gpio) + { +- signal -= 200; +-/* gpio2->dir &= ~(0x01 << signal); //Set GPIO to input */ +- return ((gpio2->pinstate >> signal) & 0x01); ++ gpio -= AU1XXX_GPIO_BASE; ++ return ((gpio2->pinstate >> gpio) & 0x01); + } + +-void au1xxx_gpio2_write(int signal, int value) ++static void au1xxx_gpio2_write(unsigned gpio, int value) + { +- signal -= 200; ++ gpio -= AU1XXX_GPIO_BASE; + +- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) | +- (value << signal); ++ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ++ (value << gpio); + } + +-void au1xxx_gpio2_tristate(int signal) ++static int au1xxx_gpio2_direction_input(unsigned gpio) + { +- signal -= 200; +- gpio2->dir &= ~(0x01 << signal); /* Set GPIO to input */ ++ gpio -= AU1XXX_GPIO_BASE; ++ gpio2->dir &= ~(0x01 << gpio); ++ return 0; + } +-#endif + +-int au1xxx_gpio1_read(int signal) ++static int au1xxx_gpio2_direction_output(unsigned gpio, int value) ++{ ++ gpio -= AU1XXX_GPIO_BASE; ++ gpio2->dir = (0x01 << gpio) | (value << gpio); ++ return 0; ++} ++ ++#endif /* !defined(CONFIG_SOC_AU1000) */ ++ ++static int au1xxx_gpio1_read(unsigned gpio) + { +-/* gpio1->trioutclr |= (0x01 << signal); */ +- return ((gpio1->pinstaterd >> signal) & 0x01); ++ return ((gpio1->pinstaterd >> gpio) & 0x01); + } + +-void au1xxx_gpio1_write(int signal, int value) ++static void au1xxx_gpio1_write(unsigned gpio, int value) + { + if(value) +- gpio1->outputset = (0x01 << signal); ++ gpio1->outputset = (0x01 << gpio); + else +- gpio1->outputclr = (0x01 << signal); /* Output a Zero */ ++ /* Output a zero */ ++ gpio1->outputclr = (0x01 << gpio); + } + +-void au1xxx_gpio1_tristate(int signal) ++static int au1xxx_gpio1_direction_input(unsigned gpio) + { +- gpio1->trioutclr = (0x01 << signal); /* Tristate signal */ ++ gpio1->pininputen = (0x01 << gpio); ++ return 0; + } + ++static int au1xxx_gpio1_direction_output(unsigned gpio, int value) ++{ ++ gpio1->trioutclr = (0x01 & gpio); ++ return 0; ++} + +-int au1xxx_gpio_read(int signal) ++int au1xxx_gpio_get_value(unsigned gpio) + { +- if(signal >= 200) ++ if(gpio >= AU1XXX_GPIO_BASE) + #if defined(CONFIG_SOC_AU1000) + return 0; + #else +- return au1xxx_gpio2_read(signal); ++ return au1xxx_gpio2_read(gpio); + #endif + else +- return au1xxx_gpio1_read(signal); ++ return au1xxx_gpio1_read(gpio); + } + +-void au1xxx_gpio_write(int signal, int value) ++void au1xxx_gpio_set_value(unsigned gpio, int value) + { +- if(signal >= 200) ++ if(gpio >= AU1XXX_GPIO_BASE) + #if defined(CONFIG_SOC_AU1000) + ; + #else +- au1xxx_gpio2_write(signal, value); ++ au1xxx_gpio2_write(gpio, value); + #endif + else +- au1xxx_gpio1_write(signal, value); ++ au1xxx_gpio1_write(gpio, value); + } + +-void au1xxx_gpio_tristate(int signal) ++int au1xxx_gpio_direction_input(unsigned gpio) + { +- if(signal >= 200) ++ if (gpio >= AU1XXX_GPIO_BASE) + #if defined(CONFIG_SOC_AU1000) + ; + #else +- au1xxx_gpio2_tristate(signal); ++ return au1xxx_gpio2_direction_input(gpio); + #endif + else +- au1xxx_gpio1_tristate(signal); ++ return au1xxx_gpio1_direction_input(gpio); + } + +-void au1xxx_gpio1_set_inputs(void) ++int au1xxx_gpio_direction_output(unsigned gpio, int value) + { +- gpio1->pininputen = 0; ++ if (gpio >= AU1XXX_GPIO_BASE) ++#if defined(CONFIG_SOC_AU1000) ++ ; ++#else ++ return au1xxx_gpio2_direction_output(gpio, value); ++#endif ++ else ++ return au1xxx_gpio1_direction_output(gpio, value); + } + +-EXPORT_SYMBOL(au1xxx_gpio1_set_inputs); +-EXPORT_SYMBOL(au1xxx_gpio_tristate); +-EXPORT_SYMBOL(au1xxx_gpio_write); +-EXPORT_SYMBOL(au1xxx_gpio_read); ++EXPORT_SYMBOL(au1xxx_gpio_direction_output); ++EXPORT_SYMBOL(au1xxx_gpio_direction_input); ++EXPORT_SYMBOL(au1xxx_gpio_get_value); ++EXPORT_SYMBOL(au1xxx_gpio_set_value); +--- linux-2.6.21.1/arch/mips/Kconfig 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1.new/arch/mips/Kconfig 2007-05-21 08:04:42.000000000 +0200 +@@ -1044,6 +1044,7 @@ + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_APM_EMULATION + select SYS_SUPPORTS_KGDB ++ select GENERIC_GPIO + + config PNX8550 + bool +diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h +--- linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h 1970-01-01 01:00:00.000000000 +0100 +@@ -1,20 +0,0 @@ +-#ifndef __AU1XXX_GPIO_H +-#define __AU1XXX_GPIO_H +- +-void au1xxx_gpio1_set_inputs(void); +-void au1xxx_gpio_tristate(int signal); +-void au1xxx_gpio_write(int signal, int value); +-int au1xxx_gpio_read(int signal); +- +-typedef volatile struct +-{ +- u32 dir; +- u32 reserved; +- u32 output; +- u32 pinstate; +- u32 inten; +- u32 enable; +- +-} AU1X00_GPIO2; +- +-#endif //__AU1XXX_GPIO_H +diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h +--- linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h 2007-05-21 01:10:22.000000000 +0200 +@@ -0,0 +1,69 @@ ++#ifndef _AU1XXX_GPIO_H_ ++#define _AU1XXX_GPIO_H_ ++ ++#define AU1XXX_GPIO_BASE 200 ++ ++typedef volatile struct ++{ ++ u32 dir; ++ u32 reserved; ++ u32 output; ++ u32 pinstate; ++ u32 inten; ++ u32 enable; ++ ++} AU1X00_GPIO2; ++ ++extern int au1xxx_gpio_get_value(unsigned gpio); ++extern void au1xxx_gpio_set_value(unsigned gpio, int value); ++extern int au1xxx_gpio_direction_input(unsigned gpio); ++extern int au1xxx_gpio_direction_output(unsigned gpio, int value); ++ ++ ++/* Wrappers for the arch-neutral GPIO API */ ++ ++static inline int gpio_request(unsigned gpio, const char *label) ++{ ++ /* Not yet implemented */ ++ return 0; ++} ++ ++static inline void gpio_free(unsigned gpio) ++{ ++ /* Not yet implemented */ ++} ++ ++static inline int gpio_direction_input(unsigned gpio) ++{ ++ return au1xxx_gpio_direction_input(gpio); ++} ++ ++static inline int gpio_direction_output(unsigned gpio, int value) ++{ ++ return au1xxx_gpio_direction_output(gpio, value); ++} ++ ++static inline int gpio_get_value(unsigned gpio) ++{ ++ return au1xxx_gpio_get_value(gpio); ++} ++ ++static inline void gpio_set_value(unsigned gpio, int value) ++{ ++ au1xxx_gpio_set_value(gpio, value); ++} ++ ++static inline int gpio_to_irq(unsigned gpio) ++{ ++ return gpio; ++} ++ ++static inline int irq_to_gpio(unsigned irq) ++{ ++ return irq; ++} ++ ++/* For cansleep */ ++#include <asm-generic/gpio.h> ++ ++#endif /* _AU1XXX_GPIO_H_ */ diff --git a/target/linux/au1000/patches/005-au1000_eth_link_beat.patch b/target/linux/au1000/patches/005-au1000_eth_link_beat.patch new file mode 100644 index 0000000000..946bd84540 --- /dev/null +++ b/target/linux/au1000/patches/005-au1000_eth_link_beat.patch @@ -0,0 +1,24 @@ +diff -urN linux-2.6.16.7/drivers/net/au1000_eth.c linux-2.6.16.7.new/drivers/net/au1000_eth.c +--- linux-2.6.16.7/drivers/net/au1000_eth.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/drivers/net/au1000_eth.c 2006-04-23 01:42:48.000000000 +0200 +@@ -12,6 +12,9 @@ + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or source@mvista.com + * ++ * Bjoern Riemer 2004 ++ * riemer@fokus.fraunhofer.de or riemer@riemer-nt.de ++ * // fixed the link beat detection with ioctls (SIOCGMIIPHY) + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it +@@ -1672,6 +1675,10 @@ + aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed); + control = MAC_DISABLE_RX_OWN | MAC_RX_ENABLE | MAC_TX_ENABLE; + #ifndef CONFIG_CPU_LITTLE_ENDIAN ++ /*riemer: fix for startup without cable */ ++ if (!link) ++ dev->flags &= ~IFF_RUNNING; ++ + control |= MAC_BIG_ENDIAN; + #endif + if (link && (dev->if_port == IF_PORT_100BASEFX)) { diff --git a/target/linux/au1000/patches/006-mtx1_system_button.patch b/target/linux/au1000/patches/006-mtx1_system_button.patch new file mode 100644 index 0000000000..f4d380c729 --- /dev/null +++ b/target/linux/au1000/patches/006-mtx1_system_button.patch @@ -0,0 +1,241 @@ +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c 2006-04-23 11:54:31.000000000 +0200 +@@ -64,6 +64,7 @@ + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, ++ { AU1500_GPIO_207, INTC_INT_RISE_AND_FALL_EDGE, 0 }, + }; + + int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile 2006-04-17 23:53:25.000000000 +0200 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile 2006-04-23 14:01:36.000000000 +0200 +@@ -8,3 +8,4 @@ + # + + lib-y := init.o board_setup.o irqmap.o ++obj-y := mtx-1_sysbtn.o +diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c +--- linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c 2006-04-23 14:01:17.000000000 +0200 +@@ -0,0 +1,218 @@ ++/* ++ * Driver for the MTX-1 System Button. ++ * ++ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved. ++ * http://www.4g-systems.biz ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ * ++ * Neither Michael Stickel nor 4G Systeme GmbH admit liability nor provide ++ * warranty for any of this software. This material is provided ++ * "AS-IS" and at no charge. ++ * ++ * (c) Copyright 2005 4G Systems <info@4g-systems.biz> ++ * ++ * Release 0.01. ++ * ++ * Author: Michael Stickel michael.stickel@4g-systems.biz ++ * ++ * ++ * After the module is loaded there is a device /dev/misc/btn ++ * that can be read. It returns one char '1' if the button ++ * has been pressed an '0' if it has been released. ++ */ ++#include <linux/autoconf.h> ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/kernel.h> ++#include <linux/poll.h> ++#include <linux/sched.h> ++#include <linux/miscdevice.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/irq.h> ++#include <linux/interrupt.h> ++ ++#include <asm/uaccess.h> ++ ++#include <asm/mach-au1x00/au1000.h> ++ ++ ++#ifndef FALSE ++# define FALSE (0) ++#endif ++ ++#ifndef TRUE ++# define TRUE (!FALSE) ++#endif ++ ++ ++//---------[ declarations ]----------------- ++ ++ ++static DECLARE_WAIT_QUEUE_HEAD(mtx1btn_wait_queue); ++static char state_changed; ++static char last_value; ++static char is_inuse; ++ ++ ++//---------[ Hardware Functions ]----------------- ++ ++// The MTX-1 Button is attached to GPIO207. ++#define MTX1_GPIO2_SYSBTN (7) ++#define MTX1_SYSBTN_IRQ (AU1500_GPIO_207) ++ ++ ++static char mtx1_getbtn (int btnno) ++{ ++ if (btnno==0) { ++ return (au_readl(GPIO2_PINSTATE) & (1<<MTX1_GPIO2_SYSBTN)) ? 0 : 1; ++ } ++ return 0; ++} ++ ++static void mtx1_initbuttons (void) ++{ ++ au_writel (au_readl(GPIO2_DIR) & ~(1<<MTX1_GPIO2_SYSBTN), GPIO2_DIR); ++} ++ ++ ++//---------[ Interrupt handling ]----------------- ++ ++ ++static void mtx1_btn_interrupt (int irq, void *private) ++{ ++ char value = mtx1_getbtn(0); ++ if (last_value != value) ++ { ++ last_value = value; ++ state_changed = 1; ++ wake_up (&mtx1btn_wait_queue); ++ } ++// kill_fasync(&async_queue, SIGIO, POLL_OUT); ++} ++ ++ ++static int mtx1_btn_startirq (void) ++{ ++ if (!request_irq (MTX1_SYSBTN_IRQ, mtx1_btn_interrupt, 0 /* | SA_INTERRUPT */, "mtx1btn", (void *)&state_changed)) { ++ return 0; ++ } ++ return -1; ++} ++ ++static int mtx1_btn_stopirq (void) ++{ ++ free_irq(MTX1_SYSBTN_IRQ, (void *)&state_changed); ++ return 0; ++} ++ ++ ++ ++//---------[ File Functions ]----------------- ++ ++ ++static int mtx1sysbtn_minor = -1; ++ ++ ++static int mtx1sysbtn_open (struct inode *inode, struct file *file) ++{ ++ if (MINOR(inode->i_rdev)!=mtx1sysbtn_minor) return -ENODEV; ++ if (is_inuse) return -EBUSY; ++ is_inuse=1; ++ last_value = mtx1_getbtn(0); ++ state_changed = 0; ++ return 0; ++} ++ ++ ++static int mtx1sysbtn_release (struct inode *inode, struct file *file) { ++ if (MINOR(inode->i_rdev)==mtx1sysbtn_minor) { ++ is_inuse=0; ++ } ++ return 0; ++} ++ ++ ++static ssize_t mtx1sysbtn_read (struct file *file, char *buf, size_t count, loff_t *ppos) ++{ ++ if (count < 1) ++ return -EINVAL; ++ if (!state_changed) ++ interruptible_sleep_on (&mtx1btn_wait_queue); ++ state_changed = 0; ++ char c = last_value ? '1' : '0'; /* mtx1_getbtn(0) */ ++ if(copy_to_user(buf, &c, 1)) ++ return -EFAULT; ++ return 1; ++} ++ ++ ++static unsigned int mtx1sysbtn_poll (struct file *file, poll_table * wait) ++{ ++ unsigned int mask = 0; ++ ++ poll_wait (file, &mtx1btn_wait_queue, wait); ++ ++ if (state_changed) // state changed since last time. ++ mask |= POLLIN | POLLRDNORM; ++ ++ return mask; ++} ++ ++ ++static struct file_operations mtx1sysbtn_fops = { ++ .owner = THIS_MODULE, ++ .read = mtx1sysbtn_read, ++ .poll = mtx1sysbtn_poll, ++ .open = mtx1sysbtn_open, ++ .release = mtx1sysbtn_release ++}; ++ ++ ++static struct miscdevice mtx1sysbtn_miscdev = { ++ MISC_DYNAMIC_MINOR /* SYSBTN_MINOR */ , ++ "btn", ++ &mtx1sysbtn_fops ++}; ++ ++ ++ ++//---------[ Module Functions ]----------------- ++ ++ ++void __exit exit_mtx1_sysbtn (void) ++{ ++ is_inuse = 1; ++ mtx1_btn_stopirq (); ++ misc_deregister(&mtx1sysbtn_miscdev); ++} ++ ++ ++static int __init init_mtx1_sysbtn (void) ++{ ++ printk("MTX-1 System Button driver\n"); ++ is_inuse = 1; ++ mtx1_initbuttons (); ++ if (misc_register (&mtx1sysbtn_miscdev) >= 0) { ++ mtx1sysbtn_minor = mtx1sysbtn_miscdev.minor; ++ if (mtx1_btn_startirq () == 0) { ++ is_inuse=0; ++ return 0; ++ } ++ misc_deregister(&mtx1sysbtn_miscdev); ++ } ++ return 1; ++} ++ ++module_init(init_mtx1_sysbtn); ++module_exit(exit_mtx1_sysbtn); ++ ++MODULE_AUTHOR("Michael Stickel"); ++MODULE_DESCRIPTION("Driver for the MTX-1 system button"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/au1000/patches/011-mtx1_leds.patch b/target/linux/au1000/patches/011-mtx1_leds.patch new file mode 100644 index 0000000000..93c681e964 --- /dev/null +++ b/target/linux/au1000/patches/011-mtx1_leds.patch @@ -0,0 +1,28 @@ +diff -urN linux-2.6.19.2/drivers/leds/Kconfig linux-2.6.19.2.new/drivers/leds/Kconfig +--- linux-2.6.19.2/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.new/drivers/leds/Kconfig 2007-03-02 13:50:28.000000000 +0100 +@@ -76,6 +76,13 @@ + This option enables support for the Soekris net4801 and net4826 error + LED. + ++config LEDS_MTX1 ++ tristate "LED Support for MTX-1 boards" ++ depends on LEDS_CLASS && MIPS_MTX1 ++ help ++ This option enables support for the MTX-1 power and status LED. ++ ++ + comment "LED Triggers" + + config LEDS_TRIGGERS +diff -urN linux-2.6.21.1/drivers/leds/Makefile linux-2.6.21.1.new/drivers/leds/Makefile +--- linux-2.6.21.1/drivers/leds/Makefile 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21.1.new/drivers/leds/Makefile 2007-05-24 23:39:18.000000000 +0200 +@@ -16,6 +16,7 @@ + obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o + obj-$(CONFIG_LEDS_H1940) += leds-h1940.o + obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o ++obj-$(CONFIG_LEDS_MTX1) += leds-mtx1.o + + # LED Triggers + obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o diff --git a/target/linux/au1000/patches/012-mtx1_cmdline.patch b/target/linux/au1000/patches/012-mtx1_cmdline.patch new file mode 100644 index 0000000000..8f078428c4 --- /dev/null +++ b/target/linux/au1000/patches/012-mtx1_cmdline.patch @@ -0,0 +1,19 @@ +--- linux-2.6.19.2/arch/mips/au1000/mtx-1/init.c.old 2007-04-06 15:01:13.503777992 +0200 ++++ linux-2.6.19.2/arch/mips/au1000/mtx-1/init.c 2007-04-06 15:01:36.296313000 +0200 +@@ -39,7 +39,6 @@ + + int prom_argc; + char **prom_argv, **prom_envp; +-extern void __init prom_init_cmdline(void); + extern char *prom_getenv(char *envname); + + const char *get_system_type(void) +@@ -59,7 +58,7 @@ + mips_machgroup = MACH_GROUP_ALCHEMY; + mips_machtype = MACH_MTX1; /* set the platform # */ + +- prom_init_cmdline(); ++ strcpy(arcs_cmdline, CONFIG_CMDLINE); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) diff --git a/target/linux/au1000/patches/013-openwrt_rootfs.patch b/target/linux/au1000/patches/013-openwrt_rootfs.patch new file mode 100644 index 0000000000..7793161af8 --- /dev/null +++ b/target/linux/au1000/patches/013-openwrt_rootfs.patch @@ -0,0 +1,11 @@ +--- linux-2.6.19.2/drivers/mtd/maps/mtx-1_flash.c 2007-07-10 20:56:30.000000000 +0200 ++++ linux-2.6.19.2.new/drivers/mtd/maps/mtx-1_flash.c 2007-07-23 12:21:16.000000000 +0200 +@@ -28,7 +28,7 @@ + + static struct mtd_partition mtx1_partitions[] = { + { +- .name = "filesystem", ++ .name = "rootfs", + .size = 0x01C00000, + .offset = 0, + },{ diff --git a/target/linux/au1000/patches/014-au1000_eth_ioctl.patch b/target/linux/au1000/patches/014-au1000_eth_ioctl.patch new file mode 100644 index 0000000000..6187a7d5af --- /dev/null +++ b/target/linux/au1000/patches/014-au1000_eth_ioctl.patch @@ -0,0 +1,15 @@ +--- linux-2.6.22.1.orig/drivers/net/au1000_eth.c 2007-07-24 18:43:25.527583520 +0200 ++++ linux-2.6.22.1/drivers/net/au1000_eth.c 2007-07-24 23:07:00.388821102 +0200 +@@ -1320,9 +1320,12 @@ + } + } + ++#define AU1000_KNOWN_PHY_IOCTLS (SIOCGMIIPHY & 0xfff0) + static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) + { + struct au1000_private *aup = (struct au1000_private *)dev->priv; ++ if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS) ++ return -EINVAL; + + if (!netif_running(dev)) return -EINVAL; + diff --git a/target/linux/au1000/patches/015-pci-resource.patch b/target/linux/au1000/patches/015-pci-resource.patch new file mode 100644 index 0000000000..ddbb7ed8a8 --- /dev/null +++ b/target/linux/au1000/patches/015-pci-resource.patch @@ -0,0 +1,14 @@ +--- linux-2.6.22.1.orig/include/asm-mips/mach-au1x00/au1000.h 2007-07-24 18:44:21.598778839 +0200 ++++ linux-2.6.22.1/include/asm-mips/mach-au1x00/au1000.h 2007-07-24 22:08:49.761901610 +0200 +@@ -1680,9 +1680,9 @@ + #define PCI_LAST_DEVFN (19<<3) + + #define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ +-#define IOPORT_RESOURCE_END 0xffffffff ++#define IOPORT_RESOURCE_END 0xfffffffffULL + #define IOMEM_RESOURCE_START 0x10000000 +-#define IOMEM_RESOURCE_END 0xffffffff ++#define IOMEM_RESOURCE_END 0xfffffffffULL + + /* + * Borrowed from the PPC arch: diff --git a/target/linux/au1000/patches/016-pci-io_map.patch b/target/linux/au1000/patches/016-pci-io_map.patch new file mode 100644 index 0000000000..6a80f7cb44 --- /dev/null +++ b/target/linux/au1000/patches/016-pci-io_map.patch @@ -0,0 +1,10 @@ +--- linux-2.6.22.1.orig/arch/mips/au1000/common/pci.c 2007-07-24 18:42:21.031908123 +0200 ++++ linux-2.6.22.1/arch/mips/au1000/common/pci.c 2007-07-24 22:12:07.373162835 +0200 +@@ -74,6 +74,7 @@ + printk(KERN_ERR "Unable to ioremap pci space\n"); + return 1; + } ++ au1x_controller.io_map_base = virt_io_addr; + + #ifdef CONFIG_DMA_NONCOHERENT + { diff --git a/target/linux/au1000/patches/017-usb-power.patch b/target/linux/au1000/patches/017-usb-power.patch new file mode 100644 index 0000000000..7f7fac85bf --- /dev/null +++ b/target/linux/au1000/patches/017-usb-power.patch @@ -0,0 +1,11 @@ +--- linux-2.6.22.1.orig/arch/mips/au1000/mtx-1/board_setup.c 2007-07-29 18:57:35.000000000 +0200 ++++ linux-2.6.22.1/arch/mips/au1000/mtx-1/board_setup.c 2007-07-29 18:59:48.000000000 +0200 +@@ -54,7 +54,7 @@ + + void __init board_setup(void) + { +-#ifdef CONFIG_USB_OHCI ++#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + // enable USB power switch + au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR ); + au_writel( 0x100000, GPIO2_OUTPUT ); |