aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/atheros
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/atheros')
-rw-r--r--target/linux/atheros/config-2.6.30153
-rw-r--r--target/linux/atheros/config-2.6.32160
-rw-r--r--target/linux/atheros/config-2.6.34170
-rw-r--r--target/linux/atheros/config-2.6.35168
-rw-r--r--target/linux/atheros/config-2.6.36150
-rw-r--r--target/linux/atheros/patches-2.6.30/001-get_c0_compare_int_fix.patch39
-rw-r--r--target/linux/atheros/patches-2.6.30/100-board.patch3124
-rw-r--r--target/linux/atheros/patches-2.6.30/101-early-printk-support.patch68
-rw-r--r--target/linux/atheros/patches-2.6.30/105-ar2315_pci.patch297
-rw-r--r--target/linux/atheros/patches-2.6.30/110-ar2313_ethernet.patch1596
-rw-r--r--target/linux/atheros/patches-2.6.30/120-spiflash.patch659
-rw-r--r--target/linux/atheros/patches-2.6.30/130-watchdog.patch228
-rw-r--r--target/linux/atheros/patches-2.6.30/140-redboot_partition_scan.patch54
-rw-r--r--target/linux/atheros/patches-2.6.30/141-redboot_various_erase_size_fix.patch72
-rw-r--r--target/linux/atheros/patches-2.6.30/200-ar2313_enable_mvswitch.patch70
-rw-r--r--target/linux/atheros/patches-2.6.30/210-reset_button.patch174
-rw-r--r--target/linux/atheros/patches-2.6.30/220-enet_micrel_workaround.patch69
-rw-r--r--target/linux/atheros/patches-2.6.32/001-get_c0_compare_int_fix.patch39
-rw-r--r--target/linux/atheros/patches-2.6.32/100-board.patch3126
-rw-r--r--target/linux/atheros/patches-2.6.32/101-early-printk-support.patch68
-rw-r--r--target/linux/atheros/patches-2.6.32/105-ar2315_pci.patch297
-rw-r--r--target/linux/atheros/patches-2.6.32/110-ar2313_ethernet.patch1611
-rw-r--r--target/linux/atheros/patches-2.6.32/120-spiflash.patch659
-rw-r--r--target/linux/atheros/patches-2.6.32/130-watchdog.patch228
-rw-r--r--target/linux/atheros/patches-2.6.32/140-redboot_partition_scan.patch54
-rw-r--r--target/linux/atheros/patches-2.6.32/141-redboot_various_erase_size_fix.patch72
-rw-r--r--target/linux/atheros/patches-2.6.32/200-ar2313_enable_mvswitch.patch70
-rw-r--r--target/linux/atheros/patches-2.6.32/210-reset_button.patch174
-rw-r--r--target/linux/atheros/patches-2.6.32/220-enet_micrel_workaround.patch69
-rw-r--r--target/linux/atheros/patches-2.6.34/001-get_c0_compare_int_fix.patch39
-rw-r--r--target/linux/atheros/patches-2.6.34/100-board.patch3126
-rw-r--r--target/linux/atheros/patches-2.6.34/101-early-printk-support.patch68
-rw-r--r--target/linux/atheros/patches-2.6.34/105-ar2315_pci.patch297
-rw-r--r--target/linux/atheros/patches-2.6.34/110-ar2313_ethernet.patch1611
-rw-r--r--target/linux/atheros/patches-2.6.34/120-spiflash.patch659
-rw-r--r--target/linux/atheros/patches-2.6.34/130-watchdog.patch228
-rw-r--r--target/linux/atheros/patches-2.6.34/140-redboot_partition_scan.patch54
-rw-r--r--target/linux/atheros/patches-2.6.34/141-redboot_various_erase_size_fix.patch72
-rw-r--r--target/linux/atheros/patches-2.6.34/200-ar2313_enable_mvswitch.patch70
-rw-r--r--target/linux/atheros/patches-2.6.34/210-reset_button.patch174
-rw-r--r--target/linux/atheros/patches-2.6.34/220-enet_micrel_workaround.patch69
-rw-r--r--target/linux/atheros/patches-2.6.35/001-get_c0_compare_int_fix.patch39
-rw-r--r--target/linux/atheros/patches-2.6.35/100-board.patch3126
-rw-r--r--target/linux/atheros/patches-2.6.35/101-early-printk-support.patch68
-rw-r--r--target/linux/atheros/patches-2.6.35/105-ar2315_pci.patch297
-rw-r--r--target/linux/atheros/patches-2.6.35/110-ar2313_ethernet.patch1611
-rw-r--r--target/linux/atheros/patches-2.6.35/120-spiflash.patch659
-rw-r--r--target/linux/atheros/patches-2.6.35/130-watchdog.patch228
-rw-r--r--target/linux/atheros/patches-2.6.35/140-redboot_partition_scan.patch54
-rw-r--r--target/linux/atheros/patches-2.6.35/141-redboot_various_erase_size_fix.patch72
-rw-r--r--target/linux/atheros/patches-2.6.35/200-ar2313_enable_mvswitch.patch70
-rw-r--r--target/linux/atheros/patches-2.6.35/210-reset_button.patch174
-rw-r--r--target/linux/atheros/patches-2.6.35/211-reset_button-2.6.35.patch12
-rw-r--r--target/linux/atheros/patches-2.6.35/220-enet_micrel_workaround.patch69
-rw-r--r--target/linux/atheros/patches-2.6.36/001-get_c0_compare_int_fix.patch39
-rw-r--r--target/linux/atheros/patches-2.6.36/100-board.patch3129
-rw-r--r--target/linux/atheros/patches-2.6.36/101-early-printk-support.patch68
-rw-r--r--target/linux/atheros/patches-2.6.36/105-ar2315_pci.patch297
-rw-r--r--target/linux/atheros/patches-2.6.36/110-ar2313_ethernet.patch1611
-rw-r--r--target/linux/atheros/patches-2.6.36/120-spiflash.patch659
-rw-r--r--target/linux/atheros/patches-2.6.36/130-watchdog.patch228
-rw-r--r--target/linux/atheros/patches-2.6.36/140-redboot_partition_scan.patch54
-rw-r--r--target/linux/atheros/patches-2.6.36/141-redboot_various_erase_size_fix.patch72
-rw-r--r--target/linux/atheros/patches-2.6.36/200-ar2313_enable_mvswitch.patch70
-rw-r--r--target/linux/atheros/patches-2.6.36/209_watchdog_fix.patch11
-rw-r--r--target/linux/atheros/patches-2.6.36/210-reset_button.patch174
-rw-r--r--target/linux/atheros/patches-2.6.36/211-reset_button-2.6.36.patch12
-rw-r--r--target/linux/atheros/patches-2.6.36/220-enet_micrel_workaround.patch69
68 files changed, 0 insertions, 33157 deletions
diff --git a/target/linux/atheros/config-2.6.30 b/target/linux/atheros/config-2.6.30
deleted file mode 100644
index e57e32157e..0000000000
--- a/target/linux/atheros/config-2.6.30
+++ /dev/null
@@ -1,153 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_AR231X_ETHERNET=y
-CONFIG_AR8216_PHY=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR2315=y
-CONFIG_ATHEROS_AR2315_PCI=y
-CONFIG_ATHEROS_AR231X=y
-CONFIG_ATHEROS_AR5312=y
-CONFIG_ATHEROS_WDT=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BINARY_PRINTF is not set
-CONFIG_BITREVERSE=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
-# CONFIG_COMPAT_NET_DEV_OPS is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIO_DEVICE=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR2315=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MVSWITCH_PHY=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/atheros/config-2.6.32 b/target/linux/atheros/config-2.6.32
deleted file mode 100644
index e13c46ce60..0000000000
--- a/target/linux/atheros/config-2.6.32
+++ /dev/null
@@ -1,160 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_AR231X_ETHERNET=y
-# CONFIG_AR7 is not set
-CONFIG_AR8216_PHY=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR2315=y
-CONFIG_ATHEROS_AR2315_PCI=y
-CONFIG_ATHEROS_AR231X=y
-CONFIG_ATHEROS_AR5312=y
-CONFIG_ATHEROS_WDT=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2E is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIO_DEVICE=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR2315=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MVSWITCH_PHY=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SWAP is not set
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_TREE_RCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/atheros/config-2.6.34 b/target/linux/atheros/config-2.6.34
deleted file mode 100644
index e8c17ae062..0000000000
--- a/target/linux/atheros/config-2.6.34
+++ /dev/null
@@ -1,170 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_AR231X_ETHERNET=y
-# CONFIG_AR7 is not set
-CONFIG_AR8216_PHY=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR2315=y
-CONFIG_ATHEROS_AR2315_PCI=y
-CONFIG_ATHEROS_AR231X=y
-CONFIG_ATHEROS_AR5312=y
-CONFIG_ATHEROS_WDT=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIO_DEVICE=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR2315=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MVSWITCH_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SWAP is not set
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/atheros/config-2.6.35 b/target/linux/atheros/config-2.6.35
deleted file mode 100644
index 45011f1e40..0000000000
--- a/target/linux/atheros/config-2.6.35
+++ /dev/null
@@ -1,168 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_AR231X_ETHERNET=y
-# CONFIG_AR7 is not set
-CONFIG_AR8216_PHY=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR2315=y
-CONFIG_ATHEROS_AR2315_PCI=y
-CONFIG_ATHEROS_AR231X=y
-CONFIG_ATHEROS_AR5312=y
-CONFIG_ATHEROS_WDT=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIO_DEVICE=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR2315=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MVSWITCH_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SWAP is not set
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/atheros/config-2.6.36 b/target/linux/atheros/config-2.6.36
deleted file mode 100644
index cb093dc973..0000000000
--- a/target/linux/atheros/config-2.6.36
+++ /dev/null
@@ -1,150 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_AR231X_ETHERNET=y
-# CONFIG_AR7 is not set
-CONFIG_AR8216_PHY=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR2315=y
-CONFIG_ATHEROS_AR2315_PCI=y
-CONFIG_ATHEROS_AR231X=y
-CONFIG_ATHEROS_AR5312=y
-CONFIG_ATHEROS_WDT=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_CAVIUM_OCTEON_HELPER=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIO_DEVICE=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LOONGSON_MC146818 is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR2315=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MVSWITCH_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_MFD_HSU is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SWAP is not set
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/atheros/patches-2.6.30/001-get_c0_compare_int_fix.patch b/target/linux/atheros/patches-2.6.30/001-get_c0_compare_int_fix.patch
deleted file mode 100644
index 0f6873ddca..0000000000
--- a/target/linux/atheros/patches-2.6.30/001-get_c0_compare_int_fix.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Fix the usage of get_c0_compare_int: override cp0_compare_irq if the returned
-value is in the MIPS CPU IRQ range to ensure that c0_compare_int_usable()
-still works.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -167,20 +167,23 @@ int __cpuinit r4k_clockevent_init(void)
- struct clock_event_device *cd;
- unsigned int irq;
-
-- if (!cpu_has_counter || !mips_hpt_frequency)
-- return -ENXIO;
--
-- if (!c0_compare_int_usable())
-- return -ENXIO;
--
- /*
- * With vectored interrupts things are getting platform specific.
- * get_c0_compare_int is a hook to allow a platform to return the
- * interrupt number of it's liking.
- */
- irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
-- if (get_c0_compare_int)
-+ if (get_c0_compare_int) {
- irq = get_c0_compare_int();
-+ if ((irq >= MIPS_CPU_IRQ_BASE) && (irq < MIPS_CPU_IRQ_BASE + 8))
-+ cp0_compare_irq = irq - MIPS_CPU_IRQ_BASE;
-+ }
-+
-+ if (!cpu_has_counter || !mips_hpt_frequency)
-+ return -ENXIO;
-+
-+ if (!c0_compare_int_usable())
-+ return -ENXIO;
-
- cd = &per_cpu(mips_clockevent_device, cpu);
-
diff --git a/target/linux/atheros/patches-2.6.30/100-board.patch b/target/linux/atheros/patches-2.6.30/100-board.patch
deleted file mode 100644
index 8183fb8aa2..0000000000
--- a/target/linux/atheros/patches-2.6.30/100-board.patch
+++ /dev/null
@@ -1,3124 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -60,6 +60,19 @@ config BCM47XX
- help
- Support for BCM47XX based boards
-
-+config ATHEROS_AR231X
-+ bool "Atheros 231x/531x SoC support"
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select GENERIC_GPIO
-+ help
-+ Support for AR231x and AR531x based boards
-+
- config MIPS_COBALT
- bool "Cobalt Server"
- select CEVT_R4K
-@@ -633,6 +646,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
-
- endchoice
-
-+source "arch/mips/ar231x/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -283,6 +283,13 @@ libs-$(CONFIG_MIPS_XXS1500) += arch/mips
- load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
-
- #
-+# Atheros AR5312/AR2312 WiSoC
-+#
-+core-$(CONFIG_ATHEROS_AR231X) += arch/mips/ar231x/
-+cflags-$(CONFIG_ATHEROS_AR231X) += -I$(srctree)/arch/mips/include/asm/mach-ar231x
-+load-$(CONFIG_ATHEROS_AR231X) += 0xffffffff80041000
-+
-+#
- # Cobalt Server
- #
- core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
---- /dev/null
-+++ b/arch/mips/ar231x/Kconfig
-@@ -0,0 +1,17 @@
-+config ATHEROS_AR5312
-+ bool "Atheros 5312/2312+ support"
-+ depends on ATHEROS_AR231X
-+ default y
-+
-+config ATHEROS_AR2315
-+ bool "Atheros 2315+ support"
-+ depends on ATHEROS_AR231X
-+ select DMA_NONCOHERENT
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select GENERIC_GPIO
-+ default y
---- /dev/null
-+++ b/arch/mips/ar231x/Makefile
-@@ -0,0 +1,13 @@
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License. See the file "COPYING" in the main directory of this archive
-+# for more details.
-+#
-+# Copyright (C) 2006 FON Technology, SL.
-+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+#
-+
-+obj-y += board.o prom.o devices.o
-+obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
-+obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
---- /dev/null
-+++ b/arch/mips/ar231x/board.c
-@@ -0,0 +1,251 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/random.h>
-+#include <linux/etherdevice.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/reboot.h>
-+#include <asm/io.h>
-+
-+#include <ar231x_platform.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+void (*ar231x_irq_dispatch)(void);
-+
-+static inline bool
-+check_radio_magic(u8 *addr)
-+{
-+ addr += 0x7a; /* offset for flash magic */
-+ if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static inline bool
-+check_board_data(u8 *flash_limit, u8 *addr, bool broken)
-+{
-+ /* config magic found */
-+ if (*((u32 *)addr) == AR531X_BD_MAGIC)
-+ return 1;
-+
-+ if (!broken)
-+ return 0;
-+
-+ if (check_radio_magic(addr + 0xf8))
-+ ar231x_board.radio = addr + 0xf8;
-+ if ((addr < flash_limit + 0x10000) &&
-+ check_radio_magic(addr + 0x10000))
-+ ar231x_board.radio = addr + 0x10000;
-+
-+ if (ar231x_board.radio) {
-+ /* broken board data detected, use radio data to find the offset,
-+ * user will fix this */
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static u8 *
-+find_board_config(u8 *flash_limit, bool broken)
-+{
-+ u8 *addr;
-+ int found = 0;
-+
-+ for (addr = flash_limit - 0x1000;
-+ addr >= flash_limit - 0x30000;
-+ addr -= 0x1000) {
-+
-+ if (check_board_data(flash_limit, addr, broken)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ if (!found)
-+ addr = NULL;
-+
-+ return addr;
-+}
-+
-+static u8 *
-+find_radio_config(u8 *flash_limit, u8 *board_config)
-+{
-+ int found;
-+ u8 *radio_config;
-+
-+ /*
-+ * Now find the start of Radio Configuration data, using heuristics:
-+ * Search forward from Board Configuration data by 0x1000 bytes
-+ * at a time until we find non-0xffffffff.
-+ */
-+ found = 0;
-+ for (radio_config = board_config + 0x1000;
-+ (radio_config < flash_limit);
-+ radio_config += 0x1000) {
-+ if ((*(u32 *)radio_config != 0xffffffff) &&
-+ check_radio_magic(radio_config)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ /* AR2316 relocates radio config to new location */
-+ if (!found) {
-+ for (radio_config = board_config + 0xf8;
-+ (radio_config < flash_limit - 0x1000 + 0xf8);
-+ radio_config += 0x1000) {
-+ if ((*(u32 *)radio_config != 0xffffffff) &&
-+ check_radio_magic(radio_config)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (!found) {
-+ printk("Could not find Radio Configuration data\n");
-+ radio_config = 0;
-+ }
-+
-+ return (u8 *) radio_config;
-+}
-+
-+int __init
-+ar231x_find_config(u8 *flash_limit)
-+{
-+ struct ar231x_boarddata *config;
-+ unsigned int rcfg_size;
-+ int broken_boarddata = 0;
-+ u8 *bcfg, *rcfg;
-+ u8 *board_data;
-+ u8 *radio_data;
-+ u32 offset;
-+
-+ ar231x_board.config = NULL;
-+ ar231x_board.radio = NULL;
-+ /* Copy the board and radio data to RAM, because accessing the mapped
-+ * memory of the flash directly after booting is not safe */
-+
-+ /* Try to find valid board and radio data */
-+ bcfg = find_board_config(flash_limit, false);
-+
-+ /* If that fails, try to at least find valid radio data */
-+ if (!bcfg) {
-+ bcfg = find_board_config(flash_limit, true);
-+ broken_boarddata = 1;
-+ }
-+
-+ if (!bcfg) {
-+ printk(KERN_WARNING "WARNING: No board configuration data found!\n");
-+ return -ENODEV;
-+ }
-+
-+ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
-+ ar231x_board.config = (struct ar231x_boarddata *) board_data;
-+ memcpy(board_data, bcfg, 0x100);
-+ if (broken_boarddata) {
-+ printk(KERN_WARNING "WARNING: broken board data detected\n");
-+ config = ar231x_board.config;
-+ if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
-+ printk(KERN_INFO "Fixing up empty mac addresses\n");
-+ config->resetConfigGpio = 0xffff;
-+ config->sysLedGpio = 0xffff;
-+ random_ether_addr(config->wlan0_mac);
-+ config->wlan0_mac[0] &= ~0x06;
-+ random_ether_addr(config->enet0_mac);
-+ random_ether_addr(config->enet1_mac);
-+ }
-+ }
-+
-+
-+ /* Radio config starts 0x100 bytes after board config, regardless
-+ * of what the physical layout on the flash chip looks like */
-+
-+ if (ar231x_board.radio)
-+ rcfg = (u8 *) ar231x_board.radio;
-+ else
-+ rcfg = find_radio_config(flash_limit, bcfg);
-+
-+ if (!rcfg)
-+ return -ENODEV;
-+
-+ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
-+ ar231x_board.radio = radio_data;
-+ offset = radio_data - board_data;
-+ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset);
-+ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
-+ memcpy(radio_data, rcfg, rcfg_size);
-+
-+ return 0;
-+}
-+
-+static void
-+ar231x_halt(void)
-+{
-+ local_irq_disable();
-+ while (1);
-+}
-+
-+void __init
-+plat_mem_setup(void)
-+{
-+ _machine_halt = ar231x_halt;
-+ pm_power_off = ar231x_halt;
-+
-+ ar5312_plat_setup();
-+ ar2315_plat_setup();
-+
-+ /* Disable data watchpoints */
-+ write_c0_watchlo0(0);
-+}
-+
-+
-+asmlinkage void
-+plat_irq_dispatch(void)
-+{
-+ ar231x_irq_dispatch();
-+}
-+
-+void __init
-+plat_time_init(void)
-+{
-+ ar5312_time_init();
-+ ar2315_time_init();
-+}
-+
-+unsigned int __cpuinit
-+get_c0_compare_int(void)
-+{
-+ return CP0_LEGACY_COMPARE_IRQ;
-+}
-+
-+void __init
-+arch_init_irq(void)
-+{
-+ clear_c0_status(ST0_IM);
-+ mips_cpu_irq_init();
-+
-+ /* Initialize interrupt controllers */
-+ ar5312_irq_init();
-+ ar2315_irq_init();
-+}
-+
-+
---- /dev/null
-+++ b/arch/mips/ar231x/prom.c
-@@ -0,0 +1,37 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright MontaVista Software Inc
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Prom setup file for ar531x
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/autoconf.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/bootinfo.h>
-+#include <asm/addrspace.h>
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+void __init prom_init(void)
-+{
-+ ar5312_prom_init();
-+ ar2315_prom_init();
-+}
-+
-+void __init prom_free_prom_memory(void)
-+{
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
-@@ -0,0 +1,83 @@
-+#ifndef __AR531X_PLATFORM_H
-+#define __AR531X_PLATFORM_H
-+
-+/*
-+ * This is board-specific data that is stored in a "fixed" location in flash.
-+ * It is shared across operating systems, so it should not be changed lightly.
-+ * The main reason we need it is in order to extract the ethernet MAC
-+ * address(es).
-+ */
-+struct ar231x_boarddata {
-+ u32 magic; /* board data is valid */
-+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
-+ u16 cksum; /* checksum (starting with BD_REV 2) */
-+ u16 rev; /* revision of this struct */
-+#define BD_REV 4
-+ char boardName[64]; /* Name of board */
-+ u16 major; /* Board major number */
-+ u16 minor; /* Board minor number */
-+ u32 flags; /* Board configuration */
-+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
-+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
-+#define BD_UART1 0x00000004 /* UART1 is stuffed */
-+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
-+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
-+#define BD_SYSLED 0x00000020 /* System LED stuffed */
-+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
-+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
-+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
-+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
-+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
-+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
-+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
-+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
-+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
-+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
-+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
-+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
-+ u16 resetConfigGpio; /* Reset factory GPIO pin */
-+ u16 sysLedGpio; /* System LED GPIO pin */
-+
-+ u32 cpuFreq; /* CPU core frequency in Hz */
-+ u32 sysFreq; /* System frequency in Hz */
-+ u32 cntFreq; /* Calculated C0_COUNT frequency */
-+
-+ u8 wlan0_mac[6];
-+ u8 enet0_mac[6];
-+ u8 enet1_mac[6];
-+
-+ u16 pciId; /* Pseudo PCIID for common code */
-+ u16 memCap; /* cap bank1 in MB */
-+
-+ /* version 3 */
-+ u8 wlan1_mac[6]; /* (ar5212) */
-+};
-+
-+#define BOARD_CONFIG_BUFSZ 0x1000
-+
-+/*
-+ * Platform device information for the Wireless MAC
-+ */
-+struct ar231x_board_config {
-+ u16 devid;
-+
-+ /* board config data */
-+ struct ar231x_boarddata *config;
-+
-+ /* radio calibration data */
-+ const char *radio;
-+};
-+
-+/*
-+ * Platform device information for the Ethernet MAC
-+ */
-+struct ar231x_eth {
-+ u32 reset_base;
-+ u32 reset_mac;
-+ u32 reset_phy;
-+ u32 phy_base;
-+ struct ar231x_board_config *config;
-+ char *macaddr;
-+};
-+
-+#endif /* __AR531X_PLATFORM_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
-@@ -0,0 +1,84 @@
-+/*
-+ * Atheros SoC specific CPU feature overrides
-+ *
-+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was derived from: include/asm-mips/cpu-features.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ * Copyright (C) 2004 Maciej W. Rozycki
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
-+
-+/*
-+ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
-+ */
-+#define cpu_has_tlb 1
-+#define cpu_has_4kex 1
-+#define cpu_has_3k_cache 0
-+#define cpu_has_4k_cache 1
-+#define cpu_has_tx39_cache 0
-+#define cpu_has_sb1_cache 0
-+#define cpu_has_fpu 0
-+#define cpu_has_32fpr 0
-+#define cpu_has_counter 1
-+/* #define cpu_has_watch ? */
-+/* #define cpu_has_divec ? */
-+/* #define cpu_has_vce ? */
-+/* #define cpu_has_cache_cdex_p ? */
-+/* #define cpu_has_cache_cdex_s ? */
-+/* #define cpu_has_prefetch ? */
-+/* #define cpu_has_mcheck ? */
-+#define cpu_has_ejtag 1
-+
-+#if !defined(CONFIG_ATHEROS_AR5312)
-+# define cpu_has_llsc 1
-+#else
-+/*
-+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
-+ * ll/sc instructions.
-+ */
-+# define cpu_has_llsc 0
-+#endif
-+
-+#define cpu_has_mips16 0
-+#define cpu_has_mdmx 0
-+#define cpu_has_mips3d 0
-+#define cpu_has_smartmips 0
-+
-+/* #define cpu_has_vtag_icache ? */
-+/* #define cpu_has_dc_aliases ? */
-+/* #define cpu_has_ic_fills_f_dc ? */
-+/* #define cpu_has_pindexed_dcache ? */
-+
-+/* #define cpu_icache_snoops_remote_store ? */
-+
-+#define cpu_has_mips32r1 1
-+
-+#if !defined(CONFIG_ATHEROS_AR5312)
-+# define cpu_has_mips32r2 1
-+#endif
-+
-+#define cpu_has_mips64r1 0
-+#define cpu_has_mips64r2 0
-+
-+#define cpu_has_dsp 0
-+#define cpu_has_mipsmt 0
-+
-+/* #define cpu_has_nofpuex ? */
-+#define cpu_has_64bits 0
-+#define cpu_has_64bit_zero_reg 0
-+#define cpu_has_64bit_gp_regs 0
-+#define cpu_has_64bit_addresses 0
-+
-+/* #define cpu_has_inclusive_pcaches ? */
-+
-+/* #define cpu_dcache_line_size() ? */
-+/* #define cpu_icache_line_size() ? */
-+
-+#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h
-@@ -0,0 +1,62 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
-+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ */
-+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
-+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
-+
-+#define PCI_DMA_OFFSET 0x20000000
-+
-+struct device;
-+
-+static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-+{
-+ return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
-+}
-+
-+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
-+{
-+ return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
-+}
-+
-+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
-+{
-+ return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
-+}
-+
-+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
-+{
-+}
-+
-+static inline int plat_dma_supported(struct device *dev, u64 mask)
-+{
-+ return 1;
-+}
-+
-+static inline void plat_extra_sync_for_device(struct device *dev)
-+{
-+ return;
-+}
-+
-+static inline int plat_dma_mapping_error(struct device *dev,
-+ dma_addr_t dma_addr)
-+{
-+ return 0;
-+}
-+
-+static inline int plat_device_is_coherent(struct device *dev)
-+{
-+#ifdef CONFIG_DMA_COHERENT
-+ return 1;
-+#endif
-+#ifdef CONFIG_DMA_NONCOHERENT
-+ return 0;
-+#endif
-+}
-+
-+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/gpio.h
-@@ -0,0 +1,79 @@
-+#ifndef _ATHEROS_GPIO_H_
-+#define _ATHEROS_GPIO_H_
-+
-+#include <ar231x.h>
-+
-+struct ar231x_gpiodev {
-+ u32 valid_mask;
-+ u32 (*get_output)(void);
-+ u32 (*set_output)(u32 mask, u32 val);
-+ u32 (*get)(void);
-+ u32 (*set)(u32 mask, u32 val);
-+};
-+
-+extern const struct ar231x_gpiodev *ar231x_gpiodev;
-+
-+/*
-+ * Wrappers for the generic GPIO layer
-+ */
-+
-+static inline int gpio_direction_input(unsigned gpio) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return -ENXIO;
-+
-+ ar231x_gpiodev->set_output(mask, 0);
-+ return 0;
-+}
-+
-+static inline void gpio_set_value(unsigned gpio, int value) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return;
-+
-+ ar231x_gpiodev->set(mask, (!!value) * mask);
-+}
-+
-+static inline int gpio_direction_output(unsigned gpio, int value) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return -ENXIO;
-+
-+ ar231x_gpiodev->set_output(mask, mask);
-+ ar231x_gpiodev->set(mask, (!!value) * mask);
-+ return 0;
-+}
-+
-+/* Reads the gpio pin. Unchecked function */
-+static inline int gpio_get_value(unsigned gpio) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return 0;
-+
-+ return !!(ar231x_gpiodev->get() & mask);
-+}
-+
-+static inline int gpio_request(unsigned gpio, const char *label) {
-+ return 0;
-+}
-+
-+static inline void gpio_free(unsigned gpio) {
-+}
-+
-+/* Returns IRQ to attach for gpio. Unchecked function */
-+static inline int gpio_to_irq(unsigned gpio) {
-+ return AR531X_GPIO_IRQ(gpio);
-+}
-+
-+/* Returns gpio for IRQ attached. Unchecked function */
-+static inline int irq_to_gpio(unsigned irq) {
-+ return (irq - (AR531X_GPIO_IRQ(0)));
-+}
-+
-+#include <asm-generic/gpio.h> /* cansleep wrappers */
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/reset.h
-@@ -0,0 +1,6 @@
-+#ifndef __AR531X_RESET_H
-+#define __AR531X_RESET_H
-+
-+void ar531x_disable_reset_button(void);
-+
-+#endif /* __AR531X_RESET_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/war.h
-@@ -0,0 +1,25 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
-+ */
-+#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
-+#define __ASM_MIPS_MACH_ATHEROS_WAR_H
-+
-+#define R4600_V1_INDEX_ICACHEOP_WAR 0
-+#define R4600_V1_HIT_CACHEOP_WAR 0
-+#define R4600_V2_HIT_CACHEOP_WAR 0
-+#define R5432_CP0_INTERRUPT_WAR 0
-+#define BCM1250_M3_WAR 0
-+#define SIBYTE_1956_WAR 0
-+#define MIPS4K_ICACHE_REFILL_WAR 0
-+#define MIPS_CACHE_SYNC_WAR 0
-+#define TX49XX_ICACHE_INDEX_INV_WAR 0
-+#define RM9000_CDEX_SMP_WAR 0
-+#define ICACHE_REFILLS_WORKAROUND_WAR 0
-+#define R10000_LLSC_WAR 0
-+#define MIPS34K_MISSED_ITLB_WAR 0
-+
-+#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
-@@ -0,0 +1,580 @@
-+/*
-+ * Register definitions for AR2315+
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef __AR2315_REG_H
-+#define __AR2315_REG_H
-+
-+/*
-+ * IRQs
-+ */
-+#define AR2315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR2315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR2315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR2315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-+#define AR2315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+
-+/*
-+ * Address map
-+ */
-+#define AR2315_SPI_READ 0x08000000 /* SPI FLASH */
-+#define AR2315_WLAN0 0xB0000000 /* Wireless MMR */
-+#define AR2315_PCI 0xB0100000 /* PCI MMR */
-+#define AR2315_SDRAMCTL 0xB0300000 /* SDRAM MMR */
-+#define AR2315_LOCAL 0xB0400000 /* LOCAL BUS MMR */
-+#define AR2315_ENET0 0xB0500000 /* ETHERNET MMR */
-+#define AR2315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */
-+#define AR2315_UART0 0xB1100003 /* UART MMR */
-+#define AR2315_SPI 0xB1300000 /* SPI FLASH MMR */
-+#define AR2315_PCIEXT 0x80000000 /* pci external */
-+
-+/*
-+ * Reset Register
-+ */
-+#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000)
-+
-+#define AR2315_RESET_COLD_AHB 0x00000001
-+#define AR2315_RESET_COLD_APB 0x00000002
-+#define AR2315_RESET_COLD_CPU 0x00000004
-+#define AR2315_RESET_COLD_CPUWARM 0x00000008
-+#define AR2315_RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
-+#define AR2317_RESET_SYSTEM 0x00000010
-+
-+
-+#define AR2315_RESET (AR2315_DSLBASE + 0x0004)
-+
-+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
-+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
-+#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
-+#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
-+#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */
-+#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */
-+#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
-+#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI interface */
-+#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */
-+#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
-+#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
-+#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
-+
-+/*
-+ * AHB master arbitration control
-+ */
-+#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008)
-+
-+#define AR2315_ARB_CPU 0x00000001 /* CPU, default */
-+#define AR2315_ARB_WLAN 0x00000002 /* WLAN */
-+#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
-+#define AR2315_ARB_LOCAL 0x00000008 /* LOCAL */
-+#define AR2315_ARB_PCI 0x00000010 /* PCI */
-+#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */
-+#define AR2315_ARB_RETRY 0x00000100 /* retry policy, debug only */
-+
-+/*
-+ * Config Register
-+ */
-+#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c)
-+
-+#define AR2315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
-+#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
-+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
-+#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */
-+#define AR2315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
-+#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
-+#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
-+
-+#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
-+#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */
-+#define AR2315_CONFIG_PCIAHB 0x00000800
-+#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
-+#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */
-+#define AR2315_CONFIG_CPU_DRAM 0x00010000
-+#define AR2315_CONFIG_CPU_PCI 0x00020000
-+#define AR2315_CONFIG_CPU_MMR 0x00040000
-+#define AR2315_CONFIG_BIG 0x00000400
-+
-+
-+/*
-+ * NMI control
-+ */
-+#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010)
-+
-+#define AR2315_NMI_EN 1
-+
-+/*
-+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
-+ */
-+#define AR2315_SREV (AR2315_DSLBASE + 0x0014)
-+
-+#define AR2315_REV_MAJ 0x00f0
-+#define AR2315_REV_MAJ_S 4
-+#define AR2315_REV_MIN 0x000f
-+#define AR2315_REV_MIN_S 0
-+#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN)
-+
-+/*
-+ * Interface Enable
-+ */
-+#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018)
-+
-+#define AR2315_IF_MASK 0x00000007
-+#define AR2315_IF_DISABLED 0
-+#define AR2315_IF_PCI 1
-+#define AR2315_IF_TS_LOCAL 2
-+#define AR2315_IF_ALL 3 /* only for emulation with separate pins */
-+#define AR2315_IF_LOCAL_HOST 0x00000008
-+#define AR2315_IF_PCI_HOST 0x00000010
-+#define AR2315_IF_PCI_INTR 0x00000020
-+#define AR2315_IF_PCI_CLK_MASK 0x00030000
-+#define AR2315_IF_PCI_CLK_INPUT 0
-+#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
-+#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
-+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
-+#define AR2315_IF_PCI_CLK_SHIFT 16
-+
-+/*
-+ * APB Interrupt control
-+ */
-+
-+#define AR2315_ISR (AR2315_DSLBASE + 0x0020)
-+#define AR2315_IMR (AR2315_DSLBASE + 0x0024)
-+#define AR2315_GISR (AR2315_DSLBASE + 0x0028)
-+
-+#define AR2315_ISR_UART0 0x0001 /* high speed UART */
-+#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */
-+#define AR2315_ISR_SPI 0x0004 /* SPI bus */
-+#define AR2315_ISR_AHB 0x0008 /* AHB error */
-+#define AR2315_ISR_APB 0x0010 /* APB error */
-+#define AR2315_ISR_TIMER 0x0020 /* timer */
-+#define AR2315_ISR_GPIO 0x0040 /* GPIO */
-+#define AR2315_ISR_WD 0x0080 /* watchdog */
-+#define AR2315_ISR_IR_RSVD 0x0100 /* IR */
-+
-+#define AR2315_GISR_MISC 0x0001
-+#define AR2315_GISR_WLAN0 0x0002
-+#define AR2315_GISR_MPEGTS_RSVD 0x0004
-+#define AR2315_GISR_LOCALPCI 0x0008
-+#define AR2315_GISR_WMACPOLL 0x0010
-+#define AR2315_GISR_TIMER 0x0020
-+#define AR2315_GISR_ETHERNET 0x0040
-+
-+/*
-+ * Interrupt routing from IO to the processor IP bits
-+ * Define our inter mask and level
-+ */
-+#define AR2315_INTR_MISCIO SR_IBIT3
-+#define AR2315_INTR_WLAN0 SR_IBIT4
-+#define AR2315_INTR_ENET0 SR_IBIT5
-+#define AR2315_INTR_LOCALPCI SR_IBIT6
-+#define AR2315_INTR_WMACPOLL SR_IBIT7
-+#define AR2315_INTR_COMPARE SR_IBIT8
-+
-+/*
-+ * Timers
-+ */
-+#define AR2315_TIMER (AR2315_DSLBASE + 0x0030)
-+#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034)
-+#define AR2315_WD (AR2315_DSLBASE + 0x0038)
-+#define AR2315_WDC (AR2315_DSLBASE + 0x003c)
-+
-+#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000
-+#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */
-+#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */
-+
-+/*
-+ * CPU Performance Counters
-+ */
-+#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048)
-+#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c)
-+
-+#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */
-+#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */
-+#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */
-+#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */
-+#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */
-+#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
-+#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
-+
-+#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */
-+#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */
-+#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
-+#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
-+#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */
-+#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */
-+#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */
-+
-+/*
-+ * AHB Error Reporting.
-+ */
-+#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */
-+#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */
-+#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */
-+#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */
-+#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */
-+
-+#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
-+ /* write 1 to clear all bits in ERR0 */
-+#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
-+#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
-+
-+#define AR2315_PROCERR_HMAST 0x0000000f
-+#define AR2315_PROCERR_HMAST_DFLT 0
-+#define AR2315_PROCERR_HMAST_WMAC 1
-+#define AR2315_PROCERR_HMAST_ENET 2
-+#define AR2315_PROCERR_HMAST_PCIENDPT 3
-+#define AR2315_PROCERR_HMAST_LOCAL 4
-+#define AR2315_PROCERR_HMAST_CPU 5
-+#define AR2315_PROCERR_HMAST_PCITGT 6
-+
-+#define AR2315_PROCERR_HMAST_S 0
-+#define AR2315_PROCERR_HWRITE 0x00000010
-+#define AR2315_PROCERR_HSIZE 0x00000060
-+#define AR2315_PROCERR_HSIZE_S 5
-+#define AR2315_PROCERR_HTRANS 0x00000180
-+#define AR2315_PROCERR_HTRANS_S 7
-+#define AR2315_PROCERR_HBURST 0x00000e00
-+#define AR2315_PROCERR_HBURST_S 9
-+
-+/*
-+ * Clock Control
-+ */
-+#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064)
-+#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068)
-+#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c)
-+#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070)
-+#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074)
-+#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080)
-+#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084)
-+
-+/* PLLc Control fields */
-+#define PLLC_REF_DIV_M 0x00000003
-+#define PLLC_REF_DIV_S 0
-+#define PLLC_FDBACK_DIV_M 0x0000007C
-+#define PLLC_FDBACK_DIV_S 2
-+#define PLLC_ADD_FDBACK_DIV_M 0x00000080
-+#define PLLC_ADD_FDBACK_DIV_S 7
-+#define PLLC_CLKC_DIV_M 0x0001c000
-+#define PLLC_CLKC_DIV_S 14
-+#define PLLC_CLKM_DIV_M 0x00700000
-+#define PLLC_CLKM_DIV_S 20
-+
-+/* CPU CLK Control fields */
-+#define CPUCLK_CLK_SEL_M 0x00000003
-+#define CPUCLK_CLK_SEL_S 0
-+#define CPUCLK_CLK_DIV_M 0x0000000c
-+#define CPUCLK_CLK_DIV_S 2
-+
-+/* AMBA CLK Control fields */
-+#define AMBACLK_CLK_SEL_M 0x00000003
-+#define AMBACLK_CLK_SEL_S 0
-+#define AMBACLK_CLK_DIV_M 0x0000000c
-+#define AMBACLK_CLK_DIV_S 2
-+
-+/*
-+ * GPIO
-+ */
-+#define AR2315_GPIO_DI (AR2315_DSLBASE + 0x0088)
-+#define AR2315_GPIO_DO (AR2315_DSLBASE + 0x0090)
-+#define AR2315_GPIO_CR (AR2315_DSLBASE + 0x0098)
-+#define AR2315_GPIO_INT (AR2315_DSLBASE + 0x00a0)
-+
-+#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
-+#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */
-+#define AR2315_GPIO_CR_I(x) (0) /* input */
-+
-+#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */
-+#define AR2315_GPIO_INT_M (0x3F) /* mask for int */
-+#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */
-+#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */
-+
-+#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */
-+#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */
-+#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */
-+#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */
-+#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */
-+
-+#define AR2315_RESET_GPIO 5
-+#define AR2315_NUM_GPIO 22
-+
-+/*
-+ * PCI Clock Control
-+ */
-+#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4)
-+
-+#define AR2315_PCICLK_INPUT_M 0x3
-+#define AR2315_PCICLK_INPUT_S 0
-+
-+#define AR2315_PCICLK_PLLC_CLKM 0
-+#define AR2315_PCICLK_PLLC_CLKM1 1
-+#define AR2315_PCICLK_PLLC_CLKC 2
-+#define AR2315_PCICLK_REF_CLK 3
-+
-+#define AR2315_PCICLK_DIV_M 0xc
-+#define AR2315_PCICLK_DIV_S 2
-+
-+#define AR2315_PCICLK_IN_FREQ 0
-+#define AR2315_PCICLK_IN_FREQ_DIV_6 1
-+#define AR2315_PCICLK_IN_FREQ_DIV_8 2
-+#define AR2315_PCICLK_IN_FREQ_DIV_10 3
-+
-+/*
-+ * Observation Control Register
-+ */
-+#define AR2315_OCR (AR2315_DSLBASE + 0x00b0)
-+#define OCR_GPIO0_IRIN 0x0040
-+#define OCR_GPIO1_IROUT 0x0080
-+#define OCR_GPIO3_RXCLR 0x0200
-+
-+/*
-+ * General Clock Control
-+ */
-+
-+#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4)
-+#define MISCCLK_PLLBYPASS_EN 0x00000001
-+#define MISCCLK_PROCREFCLK 0x00000002
-+
-+/*
-+ * SDRAM Controller
-+ * - No read or write buffers are included.
-+ */
-+#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00)
-+#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c)
-+#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10)
-+
-+#define SDRAM_DATA_WIDTH_M 0x00006000
-+#define SDRAM_DATA_WIDTH_S 13
-+
-+#define SDRAM_COL_WIDTH_M 0x00001E00
-+#define SDRAM_COL_WIDTH_S 9
-+
-+#define SDRAM_ROW_WIDTH_M 0x000001E0
-+#define SDRAM_ROW_WIDTH_S 5
-+
-+#define SDRAM_BANKADDR_BITS_M 0x00000018
-+#define SDRAM_BANKADDR_BITS_S 3
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+
-+#define AR2315_SPI_CTL (AR2315_SPI + 0x00)
-+#define AR2315_SPI_OPCODE (AR2315_SPI + 0x04)
-+#define AR2315_SPI_DATA (AR2315_SPI + 0x08)
-+
-+#define SPI_CTL_START 0x00000100
-+#define SPI_CTL_BUSY 0x00010000
-+#define SPI_CTL_TXCNT_MASK 0x0000000f
-+#define SPI_CTL_RXCNT_MASK 0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
-+#define SPI_CTL_SIZE_MASK 0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK 0x03000000
-+#define SPI_OPCODE_MASK 0x000000ff
-+
-+/*
-+ * PCI Bus Interface Registers
-+ */
-+#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008)
-+#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c)
-+#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
-+#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
-+#define AR2315_PCIMISC_RST_MODE 0x00000030
-+#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
-+#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
-+#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
-+#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
-+#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
-+#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
-+#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
-+#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
-+
-+#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010)
-+
-+#define AR2315_PCI_UNCACHE_CFG (AR2315_PCI + 0x0014)
-+
-+#define AR2315_PCI_IN_EN (AR2315_PCI + 0x0100)
-+#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */
-+#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */
-+#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */
-+#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */
-+
-+#define AR2315_PCI_IN_DIS (AR2315_PCI + 0x0104)
-+#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
-+#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
-+#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
-+#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
-+
-+#define AR2315_PCI_IN_PTR (AR2315_PCI + 0x0200)
-+
-+#define AR2315_PCI_OUT_EN (AR2315_PCI + 0x0400)
-+#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
-+
-+#define AR2315_PCI_OUT_DIS (AR2315_PCI + 0x0404)
-+#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
-+
-+#define AR2315_PCI_OUT_PTR (AR2315_PCI + 0x0408)
-+
-+#define AR2315_PCI_INT_STATUS (AR2315_PCI + 0x0500) /* write one to clr */
-+#define AR2315_PCI_TXINT 0x00000001 /* Desc In Completed */
-+#define AR2315_PCI_TXOK 0x00000002 /* Desc In OK */
-+#define AR2315_PCI_TXERR 0x00000004 /* Desc In ERR */
-+#define AR2315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
-+#define AR2315_PCI_RXINT 0x00000010 /* Desc Out Completed */
-+#define AR2315_PCI_RXOK 0x00000020 /* Desc Out OK */
-+#define AR2315_PCI_RXERR 0x00000040 /* Desc Out ERR */
-+#define AR2315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
-+#define AR2315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
-+#define AR2315_PCI_MASK 0x0000FFFF /* Desc Mask */
-+#define AR2315_PCI_EXT_INT 0x02000000
-+#define AR2315_PCI_ABORT_INT 0x04000000
-+
-+#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */
-+
-+#define AR2315_PCI_INTEN_REG (AR2315_PCI + 0x0508)
-+#define AR2315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
-+#define AR2315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
-+
-+#define AR2315_PCI_HOST_IN_EN (AR2315_PCI + 0x0800)
-+#define AR2315_PCI_HOST_IN_DIS (AR2315_PCI + 0x0804)
-+#define AR2315_PCI_HOST_IN_PTR (AR2315_PCI + 0x0810)
-+#define AR2315_PCI_HOST_OUT_EN (AR2315_PCI + 0x0900)
-+#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904)
-+#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908)
-+
-+
-+/*
-+ * Local Bus Interface Registers
-+ */
-+#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000)
-+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
-+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
-+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
-+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
-+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
-+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
-+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
-+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
-+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
-+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
-+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
-+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
-+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
-+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
-+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
-+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
-+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
-+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
-+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
-+#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
-+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
-+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
-+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
-+
-+#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004)
-+#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */
-+
-+#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008)
-+#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C)
-+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
-+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
-+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
-+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
-+#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80
-+#define AR2315_LBM_TIMEOUT_SHFT 7
-+#define AR2315_LBM_PORTMUX 0x07000000
-+
-+
-+#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010)
-+
-+#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100)
-+#define AR2315_LB_TXEN_0 0x01
-+#define AR2315_LB_TXEN_1 0x02
-+#define AR2315_LB_TXEN_2 0x04
-+#define AR2315_LB_TXEN_3 0x08
-+
-+#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104)
-+#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200)
-+
-+#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400)
-+#define AR2315_LB_RXEN 0x01
-+
-+#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404)
-+#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408)
-+
-+#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500)
-+#define AR2315_INT_TX_DESC 0x0001
-+#define AR2315_INT_TX_OK 0x0002
-+#define AR2315_INT_TX_ERR 0x0004
-+#define AR2315_INT_TX_EOF 0x0008
-+#define AR2315_INT_RX_DESC 0x0010
-+#define AR2315_INT_RX_OK 0x0020
-+#define AR2315_INT_RX_ERR 0x0040
-+#define AR2315_INT_RX_EOF 0x0080
-+#define AR2315_INT_TX_TRUNC 0x0100
-+#define AR2315_INT_TX_STARVE 0x0200
-+#define AR2315_INT_LB_TIMEOUT 0x0400
-+#define AR2315_INT_LB_ERR 0x0800
-+#define AR2315_INT_MBOX_WR 0x1000
-+#define AR2315_INT_MBOX_RD 0x2000
-+
-+/* Bit definitions for INT MASK are the same as INT_STATUS */
-+#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504)
-+
-+#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508)
-+#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600)
-+
-+/*
-+ * IR Interface Registers
-+ */
-+#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000)
-+
-+#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */
-+
-+#define AR2315_IR_CONTROL (AR2315_IR + 0x0800)
-+#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */
-+#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */
-+#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
-+#define AR2315_IRCTL_SAMPLECLK_SHFT 1
-+#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
-+#define AR2315_IRCTL_OUTPUTCLK_SHFT 14
-+
-+#define AR2315_IR_STATUS (AR2315_IR + 0x0804)
-+#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */
-+#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */
-+
-+#define AR2315_IR_CONFIG (AR2315_IR + 0x0808)
-+#define AR2315_IRCFG_INVIN 0x00000001 /* invert input polarity */
-+#define AR2315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
-+#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
-+#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
-+#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
-+#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
-+#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
-+#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
-+#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
-+
-+#define HOST_PCI_DEV_ID 3
-+#define HOST_PCI_MBAR0 0x10000000
-+#define HOST_PCI_MBAR1 0x20000000
-+#define HOST_PCI_MBAR2 0x30000000
-+
-+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
-+#define PCI_DEVICE_MEM_SPACE 0x800000
-+
-+#endif /* __AR2315_REG_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
-@@ -0,0 +1,236 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef AR5312_H
-+#define AR5312_H
-+
-+#include <asm/addrspace.h>
-+
-+/*
-+ * IRQs
-+ */
-+
-+#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-+#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+
-+
-+/* Address Map */
-+#define AR531X_WLAN0 0x18000000
-+#define AR531X_WLAN1 0x18500000
-+#define AR531X_ENET0 0x18100000
-+#define AR531X_ENET1 0x18200000
-+#define AR531X_SDRAMCTL 0x18300000
-+#define AR531X_FLASHCTL 0x18400000
-+#define AR531X_APBBASE 0x1c000000
-+#define AR531X_FLASH 0x1e000000
-+#define AR531X_UART0 0xbc000003 /* UART MMR */
-+
-+/*
-+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
-+ * should be considered available. The AR5312 supports 2 enet MACS,
-+ * even though many reference boards only actually use 1 of them
-+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
-+ * The AR2312 supports 1 enet MAC.
-+ */
-+#define AR531X_NUM_ENET_MAC 2
-+
-+/*
-+ * Need these defines to determine true number of ethernet MACs
-+ */
-+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
-+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
-+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
-+#define AR531X_RADIO_MASK_OFF 0xc8
-+#define AR531X_RADIO0_MASK 0x0003
-+#define AR531X_RADIO1_MASK 0x000c
-+#define AR531X_RADIO1_S 2
-+
-+/*
-+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
-+ * should be considered available.
-+ */
-+#define AR531X_NUM_WMAC 2
-+
-+/* Reset/Timer Block Address Map */
-+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
-+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
-+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
-+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
-+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
-+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
-+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
-+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
-+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
-+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
-+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
-+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
-+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
-+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
-+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
-+
-+/* AR531X_WD_CTRL register bit field definitions */
-+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
-+#define AR531X_WD_CTRL_NMI 0x0001
-+#define AR531X_WD_CTRL_RESET 0x0002
-+
-+/* AR531X_ISR register bit field definitions */
-+#define AR531X_ISR_NONE 0x0000
-+#define AR531X_ISR_TIMER 0x0001
-+#define AR531X_ISR_AHBPROC 0x0002
-+#define AR531X_ISR_AHBDMA 0x0004
-+#define AR531X_ISR_GPIO 0x0008
-+#define AR531X_ISR_UART0 0x0010
-+#define AR531X_ISR_UART0DMA 0x0020
-+#define AR531X_ISR_WD 0x0040
-+#define AR531X_ISR_LOCAL 0x0080
-+
-+/* AR531X_RESET register bit field definitions */
-+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
-+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
-+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
-+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
-+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
-+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
-+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
-+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
-+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
-+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
-+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
-+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
-+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
-+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
-+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
-+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
-+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
-+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
-+
-+#define AR531X_RESET_WMAC0_BITS \
-+ AR531X_RESET_WLAN0 |\
-+ AR531X_RESET_WARM_WLAN0_MAC |\
-+ AR531X_RESET_WARM_WLAN0_BB
-+
-+#define AR531X_RESERT_WMAC1_BITS \
-+ AR531X_RESET_WLAN1 |\
-+ AR531X_RESET_WARM_WLAN1_MAC |\
-+ AR531X_RESET_WARM_WLAN1_BB
-+
-+/* AR5312_CLOCKCTL1 register bit field definitions */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-+
-+/* Valid for AR5312 and AR2312 */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-+
-+/* Valid for AR2313 */
-+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
-+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
-+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
-+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
-+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
-+
-+
-+/* AR531X_ENABLE register bit field definitions */
-+#define AR531X_ENABLE_WLAN0 0x0001
-+#define AR531X_ENABLE_ENET0 0x0002
-+#define AR531X_ENABLE_ENET1 0x0004
-+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
-+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
-+#define AR531X_ENABLE_WLAN1 \
-+ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
-+
-+/* AR531X_REV register bit field definitions */
-+#define AR531X_REV_WMAC_MAJ 0xf000
-+#define AR531X_REV_WMAC_MAJ_S 12
-+#define AR531X_REV_WMAC_MIN 0x0f00
-+#define AR531X_REV_WMAC_MIN_S 8
-+#define AR531X_REV_MAJ 0x00f0
-+#define AR531X_REV_MAJ_S 4
-+#define AR531X_REV_MIN 0x000f
-+#define AR531X_REV_MIN_S 0
-+#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
-+
-+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define AR531X_REV_MAJ_AR5312 0x4
-+#define AR531X_REV_MAJ_AR2313 0x5
-+
-+/* Minor revision numbers, bits 3..0 of Revision ID register */
-+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
-+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
-+
-+/* AR531X_FLASHCTL register bit field definitions */
-+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
-+#define FLASHCTL_IDCY_S 0
-+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
-+#define FLASHCTL_WST1_S 5
-+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
-+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
-+#define FLASHCTL_WST2_S 11
-+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
-+#define FLASHCTL_AC_S 16
-+#define FLASHCTL_AC_128K 0x00000000
-+#define FLASHCTL_AC_256K 0x00010000
-+#define FLASHCTL_AC_512K 0x00020000
-+#define FLASHCTL_AC_1M 0x00030000
-+#define FLASHCTL_AC_2M 0x00040000
-+#define FLASHCTL_AC_4M 0x00050000
-+#define FLASHCTL_AC_8M 0x00060000
-+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
-+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
-+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
-+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
-+#define FLASHCTL_WP 0x04000000 /* Write protect */
-+#define FLASHCTL_BM 0x08000000 /* Burst mode */
-+#define FLASHCTL_MW 0x30000000 /* Memory width */
-+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
-+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
-+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
-+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
-+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
-+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
-+
-+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
-+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
-+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
-+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
-+
-+/* ARM SDRAM Controller -- just enough to determine memory size */
-+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
-+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
-+#define MEM_CFG1_AC0_S 8
-+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
-+#define MEM_CFG1_AC1_S 12
-+
-+/* GPIO Address Map */
-+#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
-+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
-+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
-+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
-+
-+/* GPIO Control Register bit field definitions */
-+#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
-+#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
-+#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
-+#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
-+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
-+#define AR531X_NUM_GPIO 8
-+
-+
-+#endif
-+
---- /dev/null
-+++ b/arch/mips/ar231x/ar5312.c
-@@ -0,0 +1,549 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Platform devices for Atheros SoCs
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/leds.h>
-+#include <asm/bootinfo.h>
-+#include <asm/reboot.h>
-+#include <asm/time.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <gpio.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar5312_regs.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+
-+static void
-+ar5312_misc_irq_dispatch(void)
-+{
-+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR);
-+
-+ if (ar231x_misc_intrs & AR531X_ISR_TIMER) {
-+ do_IRQ(AR531X_MISC_IRQ_TIMER);
-+ (void)ar231x_read_reg(AR531X_TIMER);
-+ } else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC)
-+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-+ else if ((ar231x_misc_intrs & AR531X_ISR_UART0))
-+ do_IRQ(AR531X_MISC_IRQ_UART0);
-+ else if (ar231x_misc_intrs & AR531X_ISR_WD)
-+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-+ else
-+ do_IRQ(AR531X_MISC_IRQ_NONE);
-+}
-+
-+static asmlinkage void
-+ar5312_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP2)
-+ do_IRQ(AR5312_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP3)
-+ do_IRQ(AR5312_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR5312_IRQ_ENET1_INTRS);
-+ else if (pending & CAUSEF_IP5)
-+ do_IRQ(AR5312_IRQ_WLAN1_INTRS);
-+ else if (pending & CAUSEF_IP6)
-+ ar5312_misc_irq_dispatch();
-+ else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
-+}
-+
-+
-+/* Enable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar5312_misc_intr_enable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR531X_IMR);
-+ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-+ ar231x_write_reg(AR531X_IMR, imr);
-+}
-+
-+/* Disable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar5312_misc_intr_disable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR531X_IMR);
-+ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-+ ar231x_write_reg(AR531X_IMR, imr);
-+ ar231x_read_reg(AR531X_IMR); /* flush write buffer */
-+}
-+
-+static void
-+ar5312_misc_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar5312_misc_intr_enable(irq);
-+}
-+
-+static struct irq_chip ar5312_misc_intr_controller = {
-+ .name = "AR5312-MISC",
-+ .disable = ar5312_misc_intr_disable,
-+ .ack = ar5312_misc_intr_disable,
-+ .mask_ack = ar5312_misc_intr_disable,
-+ .mask = ar5312_misc_intr_disable,
-+ .unmask = ar5312_misc_intr_enable,
-+ .end = ar5312_misc_intr_end,
-+};
-+
-+
-+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ u32 proc1 = ar231x_read_reg(AR531X_PROC1);
-+ u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */
-+ u32 dma1 = ar231x_read_reg(AR531X_DMA1);
-+ u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR); /* clears error state */
-+
-+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
-+ procAddr, proc1, dmaAddr, dma1);
-+
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static struct irqaction ar5312_ahb_proc_interrupt = {
-+ .handler = ar5312_ahb_proc_handler,
-+ .flags = IRQF_DISABLED,
-+ .name = "ar5312_ahb_proc_interrupt",
-+};
-+
-+
-+static struct irqaction cascade = {
-+ .handler = no_action,
-+ .flags = IRQF_DISABLED,
-+ .name = "cascade",
-+};
-+
-+void __init ar5312_irq_init(void)
-+{
-+ int i;
-+
-+ if (!is_5312())
-+ return;
-+
-+ ar231x_irq_dispatch = ar5312_irq_dispatch;
-+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
-+ int irq = AR531X_MISC_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar5312_misc_intr_controller,
-+ handle_level_irq);
-+ }
-+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
-+ setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
-+}
-+
-+const struct ar231x_gpiodev ar5312_gpiodev;
-+
-+static u32
-+ar5312_gpio_get_output(void)
-+{
-+ u32 reg;
-+ reg = ~(ar231x_read_reg(AR531X_GPIO_CR));
-+ reg &= ar5312_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_set_output(u32 mask, u32 val)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR531X_GPIO_CR);
-+ reg |= mask;
-+ reg &= ~val;
-+ ar231x_write_reg(AR531X_GPIO_CR, reg);
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_get(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR531X_GPIO_DI);
-+ reg &= ar5312_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_set(u32 mask, u32 value)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR531X_GPIO_DO);
-+ reg &= ~mask;
-+ reg |= value;
-+ ar231x_write_reg(AR531X_GPIO_DO, reg);
-+ return reg;
-+}
-+
-+const struct ar231x_gpiodev ar5312_gpiodev = {
-+ .valid_mask = (1 << 8) - 1,
-+ .get_output = ar5312_gpio_get_output,
-+ .set_output = ar5312_gpio_set_output,
-+ .get = ar5312_gpio_get,
-+ .set = ar5312_gpio_set,
-+};
-+
-+static struct physmap_flash_data ar5312_flash_data = {
-+ .width = 2,
-+};
-+
-+static struct resource ar5312_flash_resource = {
-+ .start = AR531X_FLASH,
-+ .end = AR531X_FLASH + 0x800000 - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct ar231x_eth ar5312_eth0_data = {
-+ .reset_base = AR531X_RESET,
-+ .reset_mac = AR531X_RESET_ENET0,
-+ .reset_phy = AR531X_RESET_EPHY0,
-+ .phy_base = KSEG1ADDR(AR531X_ENET0),
-+ .config = &ar231x_board,
-+};
-+
-+static struct ar231x_eth ar5312_eth1_data = {
-+ .reset_base = AR531X_RESET,
-+ .reset_mac = AR531X_RESET_ENET1,
-+ .reset_phy = AR531X_RESET_EPHY1,
-+ .phy_base = KSEG1ADDR(AR531X_ENET1),
-+ .config = &ar231x_board,
-+};
-+
-+static struct platform_device ar5312_physmap_flash = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .dev.platform_data = &ar5312_flash_data,
-+ .resource = &ar5312_flash_resource,
-+ .num_resources = 1,
-+};
-+
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar5312_leds[] = {
-+ { .name = "wlan", .gpio = 0, .active_low = 1, },
-+};
-+
-+static const struct gpio_led_platform_data ar5312_led_data = {
-+ .num_leds = ARRAY_SIZE(ar5312_leds),
-+ .leds = (void *) ar5312_leds,
-+};
-+
-+static struct platform_device ar5312_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = (void *) &ar5312_led_data,
-+};
-+#endif
-+
-+/*
-+ * NB: This mapping size is larger than the actual flash size,
-+ * but this shouldn't be a problem here, because the flash
-+ * will simply be mapped multiple times.
-+ */
-+static char __init *ar5312_flash_limit(void)
-+{
-+ u32 ctl;
-+ /*
-+ * Configure flash bank 0.
-+ * Assume 8M window size. Flash will be aliased if it's smaller
-+ */
-+ ctl = FLASHCTL_E |
-+ FLASHCTL_AC_8M |
-+ FLASHCTL_RBLE |
-+ (0x01 << FLASHCTL_IDCY_S) |
-+ (0x07 << FLASHCTL_WST1_S) |
-+ (0x07 << FLASHCTL_WST2_S) |
-+ (ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW);
-+
-+ ar231x_write_reg(AR531X_FLASHCTL0, ctl);
-+
-+ /* Disable other flash banks */
-+ ar231x_write_reg(AR531X_FLASHCTL1,
-+ ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+ ar231x_write_reg(AR531X_FLASHCTL2,
-+ ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
-+}
-+
-+int __init ar5312_init_devices(void)
-+{
-+ struct ar231x_boarddata *config;
-+ u32 fctl = 0;
-+ const u8 *radio;
-+ u8 *c;
-+
-+ if (!is_5312())
-+ return 0;
-+
-+ /* Locate board/radio config data */
-+ ar231x_find_config(ar5312_flash_limit());
-+ config = ar231x_board.config;
-+
-+
-+ /*
-+ * Chip IDs and hardware detection for some Atheros
-+ * models are really broken!
-+ *
-+ * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
-+ * as indication for AR2312, which is otherwise
-+ * indistinguishable from the real AR5312.
-+ */
-+ if (ar231x_board.radio) {
-+ radio = ar231x_board.radio + AR531X_RADIO_MASK_OFF;
-+ if ((*((const u32 *) radio) & AR531X_RADIO0_MASK) == 0)
-+ config->flags |= BD_ISCASPER;
-+ } else
-+ radio = NULL;
-+
-+ /* AR2313 has CPU minor rev. 10 */
-+ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
-+ ar231x_devtype = DEV_TYPE_AR2313;
-+
-+ /* AR2312 shares the same Silicon ID as AR5312 */
-+ else if (config->flags & BD_ISCASPER)
-+ ar231x_devtype = DEV_TYPE_AR2312;
-+
-+ /* Everything else is probably AR5312 or compatible */
-+ else
-+ ar231x_devtype = DEV_TYPE_AR5312;
-+
-+ /* fixup flash width */
-+ fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW;
-+ switch (fctl) {
-+ case FLASHCTL_MWx16:
-+ ar5312_flash_data.width = 2;
-+ break;
-+ case FLASHCTL_MWx8:
-+ default:
-+ ar5312_flash_data.width = 1;
-+ break;
-+ }
-+
-+ platform_device_register(&ar5312_physmap_flash);
-+
-+#ifdef CONFIG_LEDS_GPIO
-+ ar5312_leds[0].gpio = config->sysLedGpio;
-+ platform_device_register(&ar5312_gpio_leds);
-+#endif
-+
-+ /* Fix up MAC addresses if necessary */
-+ if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6))
-+ memcpy(config->enet0_mac, config->enet1_mac, 6);
-+
-+ /* If ENET0 and ENET1 have the same mac address,
-+ * increment the one from ENET1 */
-+ if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) {
-+ c = config->enet1_mac + 5;
-+ while ((c >= config->enet1_mac) && !(++(*c)))
-+ c--;
-+ }
-+
-+ switch(ar231x_devtype) {
-+ case DEV_TYPE_AR5312:
-+ ar5312_eth0_data.macaddr = config->enet0_mac;
-+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
-+ AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data);
-+
-+ ar5312_eth1_data.macaddr = config->enet1_mac;
-+ ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1),
-+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
-+
-+ if (!ar231x_board.radio)
-+ return 0;
-+
-+ if ((*((u32 *) radio) & AR531X_RADIO0_MASK) &&
-+ (config->flags & BD_WLAN0))
-+ ar231x_add_wmac(0, AR531X_WLAN0,
-+ AR5312_IRQ_WLAN0_INTRS);
-+
-+ break;
-+ /*
-+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
-+ * of ENET1. Atheros calls it 'twisted' for a reason :)
-+ */
-+ case DEV_TYPE_AR2312:
-+ case DEV_TYPE_AR2313:
-+ ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base;
-+ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
-+ ar5312_eth1_data.macaddr = config->enet0_mac;
-+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1),
-+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
-+
-+ if (!ar231x_board.radio)
-+ return 0;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ if ((*((u32 *) radio) & AR531X_RADIO1_MASK) &&
-+ (config->flags & BD_WLAN1))
-+ ar231x_add_wmac(1, AR531X_WLAN1,
-+ AR5312_IRQ_WLAN1_INTRS);
-+
-+ return 0;
-+}
-+
-+
-+static void ar5312_restart(char *command)
-+{
-+ /* reset the system */
-+ local_irq_disable();
-+ while(1) {
-+ ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM);
-+ }
-+}
-+
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
-+
-+
-+static int __init
-+ar5312_cpu_frequency(void)
-+{
-+ unsigned int result;
-+ unsigned int predivide_mask, predivide_shift;
-+ unsigned int multiplier_mask, multiplier_shift;
-+ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
-+ unsigned int doubler_mask;
-+ u16 devid;
-+
-+ /* Trust the bootrom's idea of cpu frequency. */
-+ if ((result = ar231x_read_reg(AR5312_SCRATCH)))
-+ return result;
-+
-+ devid = ar231x_read_reg(AR531X_REV);
-+ devid &= AR531X_REV_MAJ;
-+ devid >>= AR531X_REV_MAJ_S;
-+ if (devid == AR531X_REV_MAJ_AR2313) {
-+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
-+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
-+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
-+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
-+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
-+ } else { /* AR5312 and AR2312 */
-+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
-+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
-+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
-+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
-+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
-+ }
-+
-+ /*
-+ * Clocking is derived from a fixed 40MHz input clock.
-+ *
-+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
-+ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
-+ * flash, Timer, Watchdog Timer)
-+ *
-+ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
-+ *
-+ * So, for example, with a PLL multiplier of 5, we have
-+ *
-+ * cpuFreq = 200MHz
-+ * sysFreq = 50MHz
-+ * cntFreq = 100MHz
-+ *
-+ * We compute the CPU frequency, based on PLL settings.
-+ */
-+
-+ clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1);
-+ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
-+ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
-+ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
-+
-+ if (clockCtl1 & doubler_mask) {
-+ multiplier = multiplier << 1;
-+ }
-+ return (40000000 / preDivisor) * multiplier;
-+}
-+
-+static inline int
-+ar5312_sys_frequency(void)
-+{
-+ return ar5312_cpu_frequency() / 4;
-+}
-+
-+void __init
-+ar5312_time_init(void)
-+{
-+ if (!is_5312())
-+ return;
-+
-+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
-+}
-+
-+
-+void __init
-+ar5312_prom_init(void)
-+{
-+ u32 memsize, memcfg, bank0AC, bank1AC;
-+ u32 devid;
-+
-+ if (!is_5312())
-+ return;
-+
-+ /* Detect memory size */
-+ memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
-+ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
-+ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
-+ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
-+ + (bank1AC ? (1 << (bank1AC+1)) : 0);
-+ memsize <<= 20;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ devid = ar231x_read_reg(AR531X_REV);
-+ devid >>= AR531X_REV_WMAC_MIN_S;
-+ devid &= AR531X_REV_CHIP;
-+ ar231x_board.devid = (u16) devid;
-+ ar231x_gpiodev = &ar5312_gpiodev;
-+}
-+
-+void __init
-+ar5312_plat_setup(void)
-+{
-+ if (!is_5312())
-+ return;
-+
-+ /* Clear any lingering AHB errors */
-+ ar231x_read_reg(AR531X_PROCADDR);
-+ ar231x_read_reg(AR531X_DMAADDR);
-+ ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
-+
-+ _machine_restart = ar5312_restart;
-+ ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
-+}
-+
---- /dev/null
-+++ b/arch/mips/ar231x/ar2315.c
-@@ -0,0 +1,658 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Platform devices for Atheros SoCs
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/delay.h>
-+#include <linux/leds.h>
-+#include <asm/bootinfo.h>
-+#include <asm/reboot.h>
-+#include <asm/time.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <asm/gpio.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar2315_regs.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar2315.h"
-+
-+static u32 gpiointmask = 0, gpiointval = 0;
-+
-+static inline void ar2315_gpio_irq(void)
-+{
-+ u32 pend;
-+ int bit = -1;
-+
-+ /* only do one gpio interrupt at a time */
-+ pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask;
-+
-+ if (pend) {
-+ bit = fls(pend) - 1;
-+ pend &= ~(1 << bit);
-+ gpiointval ^= (1 << bit);
-+ }
-+
-+ if (!pend)
-+ ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO);
-+
-+ /* Enable interrupt with edge detection */
-+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(bit)) != AR2315_GPIO_CR_I(bit))
-+ return;
-+
-+ if (bit >= 0)
-+ do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
-+}
-+
-+
-+/*
-+ * Called when an interrupt is received, this function
-+ * determines exactly which interrupt it was, and it
-+ * invokes the appropriate handler.
-+ *
-+ * Implicitly, we also define interrupt priority by
-+ * choosing which to dispatch first.
-+ */
-+static asmlinkage void
-+ar2315_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP3)
-+ do_IRQ(AR2315_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR2315_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP2) {
-+ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
-+
-+ if (misc_intr & AR2315_ISR_SPI)
-+ do_IRQ(AR531X_MISC_IRQ_SPI);
-+ else if (misc_intr & AR2315_ISR_TIMER)
-+ do_IRQ(AR531X_MISC_IRQ_TIMER);
-+ else if (misc_intr & AR2315_ISR_AHB)
-+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-+ else if (misc_intr & AR2315_ISR_GPIO)
-+ ar2315_gpio_irq();
-+ else if (misc_intr & AR2315_ISR_UART0)
-+ do_IRQ(AR531X_MISC_IRQ_UART0);
-+ else if (misc_intr & AR2315_ISR_WD)
-+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-+ else
-+ do_IRQ(AR531X_MISC_IRQ_NONE);
-+ } else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
-+}
-+
-+static void ar2315_set_gpiointmask(int gpio, int level)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR2315_GPIO_INT);
-+ reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M);
-+ reg |= gpio | AR2315_GPIO_INT_LVL(level);
-+ ar231x_write_reg(AR2315_GPIO_INT, reg);
-+}
-+
-+static void ar2315_gpio_intr_enable(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* Enable interrupt with edge detection */
-+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(gpio)) != AR2315_GPIO_CR_I(gpio))
-+ return;
-+
-+ gpiointmask |= (1 << gpio);
-+ ar2315_set_gpiointmask(gpio, 3);
-+}
-+
-+static unsigned int ar2315_gpio_intr_startup(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* reconfigure GPIO line as input */
-+ ar231x_mask_reg(AR2315_GPIO_CR, AR2315_GPIO_CR_M(gpio), AR2315_GPIO_CR_I(gpio));
-+ ar2315_gpio_intr_enable(irq);
-+ return 0;
-+}
-+
-+static void ar2315_gpio_intr_disable(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* Disable interrupt */
-+ gpiointmask &= ~(1 << gpio);
-+ ar2315_set_gpiointmask(gpio, 0);
-+}
-+
-+static void
-+ar2315_gpio_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar2315_gpio_intr_enable(irq);
-+}
-+
-+static struct irq_chip ar2315_gpio_intr_controller = {
-+ .typename = "AR2315-GPIO",
-+ .startup = ar2315_gpio_intr_startup,
-+ .ack = ar2315_gpio_intr_disable,
-+ .mask_ack = ar2315_gpio_intr_disable,
-+ .mask = ar2315_gpio_intr_disable,
-+ .unmask = ar2315_gpio_intr_enable,
-+ .end = ar2315_gpio_intr_end,
-+};
-+
-+static void
-+ar2315_misc_intr_enable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR2315_IMR);
-+ switch(irq) {
-+ case AR531X_MISC_IRQ_SPI:
-+ imr |= AR2315_ISR_SPI;
-+ break;
-+ case AR531X_MISC_IRQ_TIMER:
-+ imr |= AR2315_ISR_TIMER;
-+ break;
-+ case AR531X_MISC_IRQ_AHB_PROC:
-+ imr |= AR2315_ISR_AHB;
-+ break;
-+ case AR531X_MISC_IRQ_GPIO:
-+ imr |= AR2315_ISR_GPIO;
-+ break;
-+ case AR531X_MISC_IRQ_UART0:
-+ imr |= AR2315_ISR_UART0;
-+ break;
-+ case AR531X_MISC_IRQ_WATCHDOG:
-+ imr |= AR2315_ISR_WD;
-+ break;
-+ default:
-+ break;
-+ }
-+ ar231x_write_reg(AR2315_IMR, imr);
-+}
-+
-+static void
-+ar2315_misc_intr_disable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR2315_IMR);
-+ switch(irq) {
-+ case AR531X_MISC_IRQ_SPI:
-+ imr &= ~AR2315_ISR_SPI;
-+ break;
-+ case AR531X_MISC_IRQ_TIMER:
-+ imr &= ~AR2315_ISR_TIMER;
-+ break;
-+ case AR531X_MISC_IRQ_AHB_PROC:
-+ imr &= ~AR2315_ISR_AHB;
-+ break;
-+ case AR531X_MISC_IRQ_GPIO:
-+ imr &= ~AR2315_ISR_GPIO;
-+ break;
-+ case AR531X_MISC_IRQ_UART0:
-+ imr &= ~AR2315_ISR_UART0;
-+ break;
-+ case AR531X_MISC_IRQ_WATCHDOG:
-+ imr &= ~AR2315_ISR_WD;
-+ break;
-+ default:
-+ break;
-+ }
-+ ar231x_write_reg(AR2315_IMR, imr);
-+}
-+
-+static void
-+ar2315_misc_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar2315_misc_intr_enable(irq);
-+}
-+
-+
-+static struct irq_chip ar2315_misc_intr_controller = {
-+ .typename = "AR2315-MISC",
-+ .ack = ar2315_misc_intr_disable,
-+ .mask_ack = ar2315_misc_intr_disable,
-+ .mask = ar2315_misc_intr_disable,
-+ .unmask = ar2315_misc_intr_enable,
-+ .end = ar2315_misc_intr_end,
-+};
-+
-+static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
-+ ar231x_read_reg(AR2315_AHB_ERR1);
-+
-+ printk(KERN_ERR "AHB fatal error\n");
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction ar2315_ahb_proc_interrupt = {
-+ .handler = ar2315_ahb_proc_handler,
-+ .flags = IRQF_DISABLED,
-+ .name = "ar2315_ahb_proc_interrupt",
-+};
-+
-+static struct irqaction cascade = {
-+ .handler = no_action,
-+ .flags = IRQF_DISABLED,
-+ .name = "cascade",
-+};
-+
-+void
-+ar2315_irq_init(void)
-+{
-+ int i;
-+
-+ if (!is_2315())
-+ return;
-+
-+ ar231x_irq_dispatch = ar2315_irq_dispatch;
-+ gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
-+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
-+ int irq = AR531X_MISC_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar2315_misc_intr_controller,
-+ handle_level_irq);
-+ }
-+ for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) {
-+ int irq = AR531X_GPIO_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar2315_gpio_intr_controller,
-+ handle_level_irq);
-+ }
-+ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
-+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt);
-+ setup_irq(AR2315_IRQ_MISC_INTRS, &cascade);
-+}
-+
-+const struct ar231x_gpiodev ar2315_gpiodev;
-+
-+static u32
-+ar2315_gpio_get_output(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_CR);
-+ reg &= ar2315_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_set_output(u32 mask, u32 val)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR2315_GPIO_CR);
-+ reg &= ~mask;
-+ reg |= val;
-+ ar231x_write_reg(AR2315_GPIO_CR, reg);
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_get(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_DI);
-+ reg &= ar2315_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_set(u32 mask, u32 value)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_DO);
-+ reg &= ~mask;
-+ reg |= value;
-+ ar231x_write_reg(AR2315_GPIO_DO, reg);
-+ return reg;
-+}
-+
-+const struct ar231x_gpiodev ar2315_gpiodev = {
-+ .valid_mask = (1 << 22) - 1,
-+ .get_output = ar2315_gpio_get_output,
-+ .set_output = ar2315_gpio_set_output,
-+ .get = ar2315_gpio_get,
-+ .set = ar2315_gpio_set,
-+};
-+
-+static struct ar231x_eth ar2315_eth_data = {
-+ .reset_base = AR2315_RESET,
-+ .reset_mac = AR2315_RESET_ENET0,
-+ .reset_phy = AR2315_RESET_EPHY0,
-+ .phy_base = AR2315_ENET0,
-+ .config = &ar231x_board,
-+};
-+
-+static struct resource ar2315_spiflash_res[] = {
-+ {
-+ .name = "flash_base",
-+ .flags = IORESOURCE_MEM,
-+ .start = KSEG1ADDR(AR2315_SPI_READ),
-+ .end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1,
-+ },
-+ {
-+ .name = "flash_regs",
-+ .flags = IORESOURCE_MEM,
-+ .start = 0x11300000,
-+ .end = 0x11300012,
-+ },
-+};
-+
-+static struct platform_device ar2315_spiflash = {
-+ .id = 0,
-+ .name = "spiflash",
-+ .resource = ar2315_spiflash_res,
-+ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
-+};
-+
-+static struct platform_device ar2315_wdt = {
-+ .id = 0,
-+ .name = "ar2315_wdt",
-+};
-+
-+#define SPI_FLASH_CTL 0x00
-+#define SPI_FLASH_OPCODE 0x04
-+#define SPI_FLASH_DATA 0x08
-+
-+static inline u32
-+spiflash_read_reg(int reg)
-+{
-+ return ar231x_read_reg(KSEG1ADDR(AR2315_SPI) + reg);
-+}
-+
-+static inline void
-+spiflash_write_reg(int reg, u32 data)
-+{
-+ ar231x_write_reg(KSEG1ADDR(AR2315_SPI) + reg, data);
-+}
-+
-+static u32
-+spiflash_wait_status(void)
-+{
-+ u32 reg;
-+
-+ do {
-+ reg = spiflash_read_reg(SPI_FLASH_CTL);
-+ } while (reg & SPI_CTL_BUSY);
-+
-+ return reg;
-+}
-+
-+static u8
-+spiflash_probe(void)
-+{
-+ u32 reg;
-+
-+ reg = spiflash_wait_status();
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= (1 << 4) | 4 | SPI_CTL_START;
-+
-+ spiflash_write_reg(SPI_FLASH_OPCODE, 0xab);
-+ spiflash_write_reg(SPI_FLASH_CTL, reg);
-+
-+ reg = spiflash_wait_status();
-+ reg = spiflash_read_reg(SPI_FLASH_DATA);
-+ reg &= 0xff;
-+
-+ return (u8) reg;
-+}
-+
-+
-+#define STM_8MBIT_SIGNATURE 0x13
-+#define STM_16MBIT_SIGNATURE 0x14
-+#define STM_32MBIT_SIGNATURE 0x15
-+#define STM_64MBIT_SIGNATURE 0x16
-+#define STM_128MBIT_SIGNATURE 0x17
-+
-+static u8 __init *
-+ar2315_flash_limit(void)
-+{
-+ u32 flash_size = 0;
-+
-+ /* probe the flash chip size */
-+ switch(spiflash_probe()) {
-+ case STM_8MBIT_SIGNATURE:
-+ flash_size = 0x00100000;
-+ break;
-+ case STM_16MBIT_SIGNATURE:
-+ flash_size = 0x00200000;
-+ break;
-+ case STM_32MBIT_SIGNATURE:
-+ flash_size = 0x00400000;
-+ break;
-+ case STM_64MBIT_SIGNATURE:
-+ flash_size = 0x00800000;
-+ break;
-+ case STM_128MBIT_SIGNATURE:
-+ flash_size = 0x01000000;
-+ break;
-+ }
-+
-+ ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start +
-+ flash_size - 1;
-+ return (u8 *) ar2315_spiflash_res[0].end + 1;
-+}
-+
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar2315_leds[6];
-+static struct gpio_led_platform_data ar2315_led_data = {
-+ .leds = (void *) ar2315_leds,
-+};
-+
-+static struct platform_device ar2315_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = (void *) &ar2315_led_data,
-+ }
-+};
-+
-+static void __init
-+ar2315_init_gpio(void)
-+{
-+ static char led_names[6][6];
-+ int i, led = 0;
-+
-+ ar2315_led_data.num_leds = 0;
-+ for(i = 1; i < 8; i++)
-+ {
-+ if((i == AR2315_RESET_GPIO) ||
-+ (i == ar231x_board.config->resetConfigGpio))
-+ continue;
-+
-+ if(i == ar231x_board.config->sysLedGpio)
-+ strcpy(led_names[led], "wlan");
-+ else
-+ sprintf(led_names[led], "gpio%d", i);
-+
-+ ar2315_leds[led].name = led_names[led];
-+ ar2315_leds[led].gpio = i;
-+ ar2315_leds[led].active_low = 0;
-+ led++;
-+ }
-+ ar2315_led_data.num_leds = led;
-+ platform_device_register(&ar2315_gpio_leds);
-+}
-+#else
-+static inline void ar2315_init_gpio(void)
-+{
-+}
-+#endif
-+
-+int __init
-+ar2315_init_devices(void)
-+{
-+ if (!is_2315())
-+ return 0;
-+
-+ /* Find board configuration */
-+ ar231x_find_config(ar2315_flash_limit());
-+ ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
-+
-+ ar2315_init_gpio();
-+ platform_device_register(&ar2315_wdt);
-+ platform_device_register(&ar2315_spiflash);
-+ ar231x_add_ethernet(0, AR2315_ENET0, AR2315_IRQ_ENET0_INTRS,
-+ &ar2315_eth_data);
-+ ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
-+
-+ return 0;
-+}
-+
-+static void
-+ar2315_restart(char *command)
-+{
-+ void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
-+
-+ local_irq_disable();
-+
-+ /* try reset the system via reset control */
-+ ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM);
-+
-+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
-+ * give it some time to attempt a gpio based hardware reset
-+ * (atheros reference design workaround) */
-+ gpio_direction_output(AR2315_RESET_GPIO, 0);
-+ mdelay(100);
-+
-+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
-+ * workaround. Attempt to jump to the mips reset location -
-+ * the boot loader itself might be able to recover the system */
-+ mips_reset_vec();
-+}
-+
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
-+static int __initdata PLLC_DIVIDE_TABLE[5] = { 2, 3, 4, 6, 3 };
-+
-+static unsigned int __init
-+ar2315_sys_clk(unsigned int clockCtl)
-+{
-+ unsigned int pllcCtrl,cpuDiv;
-+ unsigned int pllcOut,refdiv,fdiv,divby2;
-+ unsigned int clkDiv;
-+
-+ pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL);
-+ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
-+ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
-+ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
-+ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
-+ divby2 += 1;
-+ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
-+
-+
-+ /* clkm input selected */
-+ switch(clockCtl & CPUCLK_CLK_SEL_M) {
-+ case 0:
-+ case 1:
-+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
-+ break;
-+ case 2:
-+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
-+ break;
-+ default:
-+ pllcOut = 40000000;
-+ clkDiv = 1;
-+ break;
-+ }
-+ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
-+ cpuDiv = cpuDiv * 2 ?: 1;
-+ return (pllcOut/(clkDiv * cpuDiv));
-+}
-+
-+static inline unsigned int
-+ar2315_cpu_frequency(void)
-+{
-+ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK));
-+}
-+
-+static inline unsigned int
-+ar2315_apb_frequency(void)
-+{
-+ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK));
-+}
-+
-+void __init
-+ar2315_time_init(void)
-+{
-+ if (!is_2315())
-+ return;
-+
-+ mips_hpt_frequency = ar2315_cpu_frequency() / 2;
-+}
-+
-+void __init
-+ar2315_prom_init(void)
-+{
-+ u32 memsize, memcfg, devid;
-+
-+ if (!is_2315())
-+ return;
-+
-+ memcfg = ar231x_read_reg(AR2315_MEM_CFG);
-+ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
-+ memsize <<= 3;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ /* Detect the hardware based on the device ID */
-+ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP;
-+ switch(devid) {
-+ case 0x90:
-+ case 0x91:
-+ ar231x_devtype = DEV_TYPE_AR2317;
-+ break;
-+ default:
-+ ar231x_devtype = DEV_TYPE_AR2315;
-+ break;
-+ }
-+ ar231x_gpiodev = &ar2315_gpiodev;
-+ ar231x_board.devid = devid;
-+}
-+
-+void __init
-+ar2315_plat_setup(void)
-+{
-+ u32 config;
-+
-+ if (!is_2315())
-+ return;
-+
-+ /* Clear any lingering AHB errors */
-+ config = read_c0_config();
-+ write_c0_config(config & ~0x3);
-+ ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET);
-+ ar231x_read_reg(AR2315_AHB_ERR1);
-+ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
-+
-+ _machine_restart = ar2315_restart;
-+ ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency());
-+}
---- /dev/null
-+++ b/arch/mips/ar231x/ar2315.h
-@@ -0,0 +1,37 @@
-+#ifndef __AR2315_H
-+#define __AR2315_H
-+
-+#ifdef CONFIG_ATHEROS_AR2315
-+
-+extern void ar2315_irq_init(void);
-+extern int ar2315_init_devices(void);
-+extern void ar2315_prom_init(void);
-+extern void ar2315_plat_setup(void);
-+extern void ar2315_time_init(void);
-+
-+#else
-+
-+static inline void ar2315_irq_init(void)
-+{
-+}
-+
-+static inline int ar2315_init_devices(void)
-+{
-+ return 0;
-+}
-+
-+static inline void ar2315_prom_init(void)
-+{
-+}
-+
-+static inline void ar2315_plat_setup(void)
-+{
-+}
-+
-+static inline void ar2315_time_init(void)
-+{
-+}
-+
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/ar5312.h
-@@ -0,0 +1,38 @@
-+#ifndef __AR5312_H
-+#define __AR5312_H
-+
-+#ifdef CONFIG_ATHEROS_AR5312
-+
-+extern void ar5312_irq_init(void);
-+extern int ar5312_init_devices(void);
-+extern void ar5312_prom_init(void);
-+extern void ar5312_plat_setup(void);
-+extern void ar5312_time_init(void);
-+extern void ar5312_time_init(void);
-+
-+#else
-+
-+static inline void ar5312_irq_init(void)
-+{
-+}
-+
-+static inline int ar5312_init_devices(void)
-+{
-+ return 0;
-+}
-+
-+static inline void ar5312_prom_init(void)
-+{
-+}
-+
-+static inline void ar5312_plat_setup(void)
-+{
-+}
-+
-+static inline void ar5312_time_init(void)
-+{
-+}
-+
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar231x.h
-@@ -0,0 +1,54 @@
-+#ifndef __AR531X_H
-+#define __AR531X_H
-+
-+#define AR531X_MISC_IRQ_BASE 0x20
-+#define AR531X_GPIO_IRQ_BASE 0x30
-+
-+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
-+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
-+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-+
-+/* Miscellaneous interrupts, which share IP6 */
-+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
-+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
-+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
-+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
-+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
-+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
-+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
-+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
-+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
-+#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9
-+#define AR531X_MISC_IRQ_COUNT 10
-+
-+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
-+#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0
-+#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n
-+#define AR531X_GPIO_IRQ_COUNT 22
-+
-+static inline u32
-+ar231x_read_reg(u32 reg)
-+{
-+ return __raw_readl((u32 *) KSEG1ADDR(reg));
-+}
-+
-+static inline void
-+ar231x_write_reg(u32 reg, u32 val)
-+{
-+ __raw_writel(val, (u32 *) KSEG1ADDR(reg));
-+}
-+
-+static inline u32
-+ar231x_mask_reg(u32 reg, u32 mask, u32 val)
-+{
-+ u32 ret;
-+
-+ ret = ar231x_read_reg(reg);
-+ ret &= ~mask;
-+ ret |= val;
-+ ar231x_write_reg(reg, ret);
-+
-+ return ret;
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/devices.h
-@@ -0,0 +1,37 @@
-+#ifndef __AR231X_DEVICES_H
-+#define __AR231X_DEVICES_H
-+
-+enum {
-+ /* handled by ar5312.c */
-+ DEV_TYPE_AR2312,
-+ DEV_TYPE_AR2313,
-+ DEV_TYPE_AR5312,
-+
-+ /* handled by ar2315.c */
-+ DEV_TYPE_AR2315,
-+ DEV_TYPE_AR2316,
-+ DEV_TYPE_AR2317,
-+
-+ DEV_TYPE_UNKNOWN
-+};
-+
-+extern int ar231x_devtype;
-+extern struct ar231x_board_config ar231x_board;
-+extern asmlinkage void (*ar231x_irq_dispatch)(void);
-+
-+extern int ar231x_find_config(u8 *flash_limit);
-+extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk);
-+extern int ar231x_add_wmac(int nr, u32 base, int irq);
-+extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata);
-+
-+static inline bool is_2315(void)
-+{
-+ return (current_cpu_data.cputype == CPU_4KEC);
-+}
-+
-+static inline bool is_5312(void)
-+{
-+ return !is_2315();
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/devices.c
-@@ -0,0 +1,175 @@
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial_8250.h>
-+#include <linux/platform_device.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+struct ar231x_board_config ar231x_board;
-+int ar231x_devtype = DEV_TYPE_UNKNOWN;
-+const struct ar231x_gpiodev *ar231x_gpiodev;
-+EXPORT_SYMBOL(ar231x_gpiodev);
-+
-+static struct resource ar231x_eth0_res[] = {
-+ {
-+ .name = "eth0_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth0_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct resource ar231x_eth1_res[] = {
-+ {
-+ .name = "eth1_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth1_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device ar231x_eth[] = {
-+ {
-+ .id = 0,
-+ .name = "ar231x-eth",
-+ .resource = ar231x_eth0_res,
-+ .num_resources = ARRAY_SIZE(ar231x_eth0_res)
-+ },
-+ {
-+ .id = 1,
-+ .name = "ar231x-eth",
-+ .resource = ar231x_eth1_res,
-+ .num_resources = ARRAY_SIZE(ar231x_eth1_res)
-+ }
-+};
-+
-+static struct resource ar231x_wmac0_res[] = {
-+ {
-+ .name = "wmac0_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "wmac0_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct resource ar231x_wmac1_res[] = {
-+ {
-+ .name = "wmac1_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "wmac1_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+
-+static struct platform_device ar231x_wmac[] = {
-+ {
-+ .id = 0,
-+ .name = "ar231x-wmac",
-+ .resource = ar231x_wmac0_res,
-+ .num_resources = ARRAY_SIZE(ar231x_wmac0_res),
-+ .dev.platform_data = &ar231x_board,
-+ },
-+ {
-+ .id = 1,
-+ .name = "ar231x-wmac",
-+ .resource = ar231x_wmac1_res,
-+ .num_resources = ARRAY_SIZE(ar231x_wmac1_res),
-+ .dev.platform_data = &ar231x_board,
-+ },
-+};
-+
-+static const char *devtype_strings[] = {
-+ [DEV_TYPE_AR5312] = "Atheros AR5312",
-+ [DEV_TYPE_AR2312] = "Atheros AR2312",
-+ [DEV_TYPE_AR2313] = "Atheros AR2313",
-+ [DEV_TYPE_AR2315] = "Atheros AR2315",
-+ [DEV_TYPE_AR2316] = "Atheros AR2316",
-+ [DEV_TYPE_AR2317] = "Atheros AR2317",
-+ [DEV_TYPE_UNKNOWN] = "Atheros (unknown)",
-+};
-+
-+const char *get_system_type(void)
-+{
-+ if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) ||
-+ !devtype_strings[ar231x_devtype])
-+ return devtype_strings[DEV_TYPE_UNKNOWN];
-+ return devtype_strings[ar231x_devtype];
-+}
-+
-+
-+int __init
-+ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata)
-+{
-+ struct resource *res;
-+
-+ ar231x_eth[nr].dev.platform_data = pdata;
-+ res = &ar231x_eth[nr].resource[0];
-+ res->start = base;
-+ res->end = base + 0x2000 - 1;
-+ res++;
-+ res->start = irq;
-+ res->end = irq;
-+ return platform_device_register(&ar231x_eth[nr]);
-+}
-+
-+void __init
-+ar231x_serial_setup(u32 mapbase, unsigned int uartclk)
-+{
-+ struct uart_port s;
-+
-+ memset(&s, 0, sizeof(s));
-+
-+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-+ s.iotype = UPIO_MEM;
-+ s.irq = AR531X_MISC_IRQ_UART0;
-+ s.regshift = 2;
-+ s.mapbase = mapbase;
-+ s.uartclk = uartclk;
-+ s.membase = (void __iomem *)s.mapbase;
-+
-+ early_serial_setup(&s);
-+}
-+
-+int __init
-+ar231x_add_wmac(int nr, u32 base, int irq)
-+{
-+ struct resource *res;
-+
-+ ar231x_wmac[nr].dev.platform_data = &ar231x_board;
-+ res = &ar231x_wmac[nr].resource[0];
-+ res->start = base;
-+ res->end = base + 0x10000 - 1;
-+ res++;
-+ res->start = irq;
-+ res->end = irq;
-+ return platform_device_register(&ar231x_wmac[nr]);
-+}
-+
-+static int __init ar231x_register_devices(void)
-+{
-+ static struct resource res = {
-+ .start = 0xFFFFFFFF,
-+ };
-+
-+ platform_device_register_simple("GPIODEV", 0, &res, 1);
-+ ar5312_init_devices();
-+ ar2315_init_devices();
-+
-+ return 0;
-+}
-+
-+device_initcall(ar231x_register_devices);
diff --git a/target/linux/atheros/patches-2.6.30/101-early-printk-support.patch b/target/linux/atheros/patches-2.6.30/101-early-printk-support.patch
deleted file mode 100644
index c09d4b3c9a..0000000000
--- a/target/linux/atheros/patches-2.6.30/101-early-printk-support.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- /dev/null
-+++ b/arch/mips/ar231x/early_printk.c
-@@ -0,0 +1,44 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ */
-+
-+#include <linux/mm.h>
-+#include <linux/io.h>
-+#include <linux/serial_reg.h>
-+#include <asm/addrspace.h>
-+
-+#include <asm/mach-ar231x/ar2315_regs.h>
-+#include <asm/mach-ar231x/ar5312_regs.h>
-+#include "devices.h"
-+
-+static inline void prom_uart_wr(void __iomem *base, unsigned reg,
-+ unsigned char ch)
-+{
-+ __raw_writeb(ch, base + 4 * reg);
-+}
-+
-+static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg)
-+{
-+ return __raw_readb(base + 4 * reg);
-+}
-+
-+void prom_putchar(unsigned char ch)
-+{
-+ static void __iomem *base;
-+
-+ if (unlikely(base == NULL)) {
-+ if (is_2315())
-+ base = (void __iomem *)(KSEG1ADDR(AR2315_UART0));
-+ else
-+ base = (void __iomem *)(KSEG1ADDR(AR531X_UART0));
-+ }
-+
-+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
-+ prom_uart_wr(base, UART_TX, ch);
-+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
-+}
-+
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -9,5 +9,8 @@
- #
-
- obj-y += board.o prom.o devices.o
-+
-+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-+
- obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
- obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -70,6 +70,7 @@ config ATHEROS_AR231X
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_32BIT_KERNEL
- select GENERIC_GPIO
-+ select SYS_HAS_EARLY_PRINTK
- help
- Support for AR231x and AR531x based boards
-
diff --git a/target/linux/atheros/patches-2.6.30/105-ar2315_pci.patch b/target/linux/atheros/patches-2.6.30/105-ar2315_pci.patch
deleted file mode 100644
index 3f5e6b4528..0000000000
--- a/target/linux/atheros/patches-2.6.30/105-ar2315_pci.patch
+++ /dev/null
@@ -1,297 +0,0 @@
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -14,3 +14,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin
-
- obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
- obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
-+obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o
---- /dev/null
-+++ b/arch/mips/ar231x/pci.c
-@@ -0,0 +1,230 @@
-+/*
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/spinlock.h>
-+#include <linux/delay.h>
-+#include <linux/irq.h>
-+#include <asm/bootinfo.h>
-+#include <asm/paccess.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/io.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include <ar2315_regs.h>
-+#include "devices.h"
-+
-+#define AR531X_MEM_BASE 0x80800000UL
-+#define AR531X_MEM_SIZE 0x00ffffffUL
-+#define AR531X_IO_SIZE 0x00007fffUL
-+
-+static unsigned long configspace;
-+
-+static int config_access(int devfn, int where, int size, u32 *ptr, bool write)
-+{
-+ unsigned long flags;
-+ int func = PCI_FUNC(devfn);
-+ int dev = PCI_SLOT(devfn);
-+ u32 value = 0;
-+ int err = 0;
-+ u32 addr;
-+
-+ if (((dev != 0) && (dev != 3)) || (func > 2))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ /* Select Configuration access */
-+ local_irq_save(flags);
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, 0, AR2315_PCIMISC_CFG_SEL);
-+ mb();
-+
-+ addr = (u32) configspace + (1 << (13 + dev)) + (func << 8) + where;
-+ if (size == 1)
-+ addr ^= 0x3;
-+ else if (size == 2)
-+ addr ^= 0x2;
-+
-+ if (write) {
-+ value = *ptr;
-+ if (size == 1)
-+ err = put_dbe(value, (u8 *) addr);
-+ else if (size == 2)
-+ err = put_dbe(value, (u16 *) addr);
-+ else if (size == 4)
-+ err = put_dbe(value, (u32 *) addr);
-+ } else {
-+ if (size == 1)
-+ err = get_dbe(value, (u8 *) addr);
-+ else if (size == 2)
-+ err = get_dbe(value, (u16 *) addr);
-+ else if (size == 4)
-+ err = get_dbe(value, (u32 *) addr);
-+ if (err)
-+ *ptr = 0xffffffff;
-+ else
-+ *ptr = value;
-+ }
-+
-+ /* Select Memory access */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_CFG_SEL, 0);
-+ local_irq_restore(flags);
-+
-+ return (err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL);
-+}
-+
-+static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
-+{
-+ return config_access(devfn, where, size, value, 0);
-+}
-+
-+static int ar231x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-+{
-+ return config_access(devfn, where, size, &value, 1);
-+}
-+
-+struct pci_ops ar231x_pci_ops = {
-+ .read = ar231x_pci_read,
-+ .write = ar231x_pci_write,
-+};
-+
-+static struct resource ar231x_mem_resource = {
-+ .name = "AR531x PCI MEM",
-+ .start = AR531X_MEM_BASE,
-+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource ar231x_io_resource = {
-+ .name = "AR531x PCI I/O",
-+ .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
-+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+struct pci_controller ar231x_pci_controller = {
-+ .pci_ops = &ar231x_pci_ops,
-+ .mem_resource = &ar231x_mem_resource,
-+ .io_resource = &ar231x_io_resource,
-+ .mem_offset = 0x00000000UL,
-+ .io_offset = 0x00000000UL,
-+};
-+
-+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return AR2315_IRQ_LCBUS_PCI;
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
-+ pci_write_config_word(dev, 0x40, 0);
-+
-+ /* Clear any pending Abort or external Interrupts
-+ * and enable interrupt processing */
-+ ar231x_mask_reg(AR2315_PCI_INTEN_REG, AR2315_PCI_INT_ENABLE, 0);
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
-+ ar231x_write_reg(AR2315_PCI_INT_MASK, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
-+ ar231x_mask_reg(AR2315_PCI_INTEN_REG, 0, AR2315_PCI_INT_ENABLE);
-+
-+ return 0;
-+}
-+
-+static void
-+ar2315_pci_fixup(struct pci_dev *dev)
-+{
-+ unsigned int devfn = dev->devfn;
-+
-+ if (dev->bus->number != 0)
-+ return;
-+
-+ /* Only fix up the PCI host settings */
-+ if ((PCI_SLOT(devfn) != 3) || (PCI_FUNC(devfn) != 0))
-+ return;
-+
-+ /* Fix up MBARs */
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, HOST_PCI_MBAR0);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, HOST_PCI_MBAR1);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, HOST_PCI_MBAR2);
-+ pci_write_config_dword(dev, PCI_COMMAND,
-+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL |
-+ PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR |
-+ PCI_COMMAND_FAST_BACK);
-+}
-+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar2315_pci_fixup);
-+
-+static int __init
-+ar2315_pci_init(void)
-+{
-+ u32 reg;
-+
-+ if (ar231x_devtype != DEV_TYPE_AR2315)
-+ return -ENODEV;
-+
-+ configspace = (unsigned long) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
-+ ar231x_pci_controller.io_map_base =
-+ (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE);
-+ set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space */
-+
-+ reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
-+ msleep(10);
-+
-+ reg &= ~AR2315_RESET_PCIDMA;
-+ ar231x_write_reg(AR2315_RESET, reg);
-+ msleep(10);
-+
-+ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0,
-+ AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE);
-+
-+ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
-+ (AR2315_PCICLK_IN_FREQ_DIV_6 << AR2315_PCICLK_DIV_S));
-+ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
-+ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | AR2315_IF_MASK,
-+ AR2315_IF_PCI | AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
-+ (AR2315_IF_PCI_CLK_OUTPUT_CLK << AR2315_IF_PCI_CLK_SHIFT));
-+
-+ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
-+ AR2315_PCIRST_LOW);
-+ msleep(100);
-+
-+ /* Bring the PCI out of reset */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
-+ AR2315_PCIRST_HIGH | AR2315_PCICACHE_DIS | 0x8);
-+
-+ ar231x_write_reg(AR2315_PCI_UNCACHE_CFG,
-+ 0x1E | /* 1GB uncached */
-+ (1 << 5) | /* Enable uncached */
-+ (0x2 << 30) /* Base: 0x80000000 */
-+ );
-+ ar231x_read_reg(AR2315_PCI_UNCACHE_CFG);
-+
-+ msleep(500);
-+
-+ /* dirty hack - anyone with a datasheet that knows the memory map ? */
-+ ioport_resource.start = 0x10000000;
-+ ioport_resource.end = 0xffffffff;
-+ iomem_resource.start = 0x10000000;
-+ iomem_resource.end = 0xffffffff;
-+
-+ register_pci_controller(&ar231x_pci_controller);
-+
-+ return 0;
-+}
-+
-+arch_initcall(ar2315_pci_init);
---- a/arch/mips/ar231x/Kconfig
-+++ b/arch/mips/ar231x/Kconfig
-@@ -15,3 +15,13 @@ config ATHEROS_AR2315
- select SYS_SUPPORTS_BIG_ENDIAN
- select GENERIC_GPIO
- default y
-+
-+config ATHEROS_AR2315_PCI
-+ bool "PCI support"
-+ depends on ATHEROS_AR2315
-+ select HW_HAS_PCI
-+ select PCI
-+ select USB_ARCH_HAS_HCD
-+ select USB_ARCH_HAS_OHCI
-+ select USB_ARCH_HAS_EHCI
-+ default y
---- a/arch/mips/ar231x/ar2315.c
-+++ b/arch/mips/ar231x/ar2315.c
-@@ -63,6 +63,27 @@ static inline void ar2315_gpio_irq(void)
- do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
- }
-
-+#ifdef CONFIG_ATHEROS_AR2315_PCI
-+static inline void pci_abort_irq(void)
-+{
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_ABORT_INT);
-+}
-+
-+static inline void pci_ack_irq(void)
-+{
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_EXT_INT);
-+}
-+
-+void ar2315_pci_irq(int irq)
-+{
-+ if (ar231x_read_reg(AR2315_PCI_INT_STATUS) == AR2315_PCI_ABORT_INT)
-+ pci_abort_irq();
-+ else {
-+ do_IRQ(irq);
-+ pci_ack_irq();
-+ }
-+}
-+#endif /* CONFIG_ATHEROS_AR2315_PCI */
-
- /*
- * Called when an interrupt is received, this function
-@@ -81,6 +102,10 @@ ar2315_irq_dispatch(void)
- do_IRQ(AR2315_IRQ_WLAN0_INTRS);
- else if (pending & CAUSEF_IP4)
- do_IRQ(AR2315_IRQ_ENET0_INTRS);
-+#ifdef CONFIG_ATHEROS_AR2315_PCI
-+ else if (pending & CAUSEF_IP5)
-+ ar2315_pci_irq(AR2315_IRQ_LCBUS_PCI);
-+#endif
- else if (pending & CAUSEF_IP2) {
- unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
-
diff --git a/target/linux/atheros/patches-2.6.30/110-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.30/110-ar2313_ethernet.patch
deleted file mode 100644
index fa9eead51e..0000000000
--- a/target/linux/atheros/patches-2.6.30/110-ar2313_ethernet.patch
+++ /dev/null
@@ -1,1596 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -369,6 +369,12 @@ config AX88796_93CX6
- help
- Select this if your platform comes with an external 93CX6 eeprom.
-
-+config AR231X_ETHERNET
-+ tristate "AR231x Ethernet support"
-+ depends on ATHEROS_AR231X
-+ help
-+ Support for the AR231x/531x ethernet controller
-+
- config MACE
- tristate "MACE (Power Mac ethernet) support"
- depends on PPC_PMAC && PPC32
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -203,6 +203,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
- obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
-+obj-$(CONFIG_AR231X_ETHERNET) += ar231x.o
- obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
- obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
- obj-$(CONFIG_DECLANCE) += declance.o
---- /dev/null
-+++ b/drivers/net/ar231x.c
-@@ -0,0 +1,1263 @@
-+/*
-+ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Additional credits:
-+ * This code is taken from John Taylor's Sibyte driver and then
-+ * modified for the AR2313.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+#include <linux/sockios.h>
-+#include <linux/pkt_sched.h>
-+#include <linux/mii.h>
-+#include <linux/phy.h>
-+#include <linux/ethtool.h>
-+#include <linux/ctype.h>
-+#include <linux/platform_device.h>
-+
-+#include <net/sock.h>
-+#include <net/ip.h>
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/byteorder.h>
-+#include <asm/uaccess.h>
-+#include <asm/bootinfo.h>
-+
-+#define AR2313_MTU 1692
-+#define AR2313_PRIOS 1
-+#define AR2313_QUEUES (2*AR2313_PRIOS)
-+#define AR2313_DESCR_ENTRIES 64
-+
-+
-+#ifndef min
-+#define min(a,b) (((a)<(b))?(a):(b))
-+#endif
-+
-+#ifndef SMP_CACHE_BYTES
-+#define SMP_CACHE_BYTES L1_CACHE_BYTES
-+#endif
-+
-+#define AR2313_MBOX_SET_BIT 0x8
-+
-+#include "ar231x.h"
-+
-+/*
-+ * New interrupt handler strategy:
-+ *
-+ * An old interrupt handler worked using the traditional method of
-+ * replacing an skbuff with a new one when a packet arrives. However
-+ * the rx rings do not need to contain a static number of buffer
-+ * descriptors, thus it makes sense to move the memory allocation out
-+ * of the main interrupt handler and do it in a bottom half handler
-+ * and only allocate new buffers when the number of buffers in the
-+ * ring is below a certain threshold. In order to avoid starving the
-+ * NIC under heavy load it is however necessary to force allocation
-+ * when hitting a minimum threshold. The strategy for alloction is as
-+ * follows:
-+ *
-+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
-+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
-+ * the buffers in the interrupt handler
-+ * RX_RING_THRES - maximum number of buffers in the rx ring
-+ *
-+ * One advantagous side effect of this allocation approach is that the
-+ * entire rx processing can be done without holding any spin lock
-+ * since the rx rings and registers are totally independent of the tx
-+ * ring and its registers. This of course includes the kmalloc's of
-+ * new skb's. Thus start_xmit can run in parallel with rx processing
-+ * and the memory allocation on SMP systems.
-+ *
-+ * Note that running the skb reallocation in a bottom half opens up
-+ * another can of races which needs to be handled properly. In
-+ * particular it can happen that the interrupt handler tries to run
-+ * the reallocation while the bottom half is either running on another
-+ * CPU or was interrupted on the same CPU. To get around this the
-+ * driver uses bitops to prevent the reallocation routines from being
-+ * reentered.
-+ *
-+ * TX handling can also be done without holding any spin lock, wheee
-+ * this is fun! since tx_csm is only written to by the interrupt
-+ * handler.
-+ */
-+
-+/*
-+ * Threshold values for RX buffer allocation - the low water marks for
-+ * when to start refilling the rings are set to 75% of the ring
-+ * sizes. It seems to make sense to refill the rings entirely from the
-+ * intrrupt handler once it gets below the panic threshold, that way
-+ * we don't risk that the refilling is moved to another CPU when the
-+ * one running the interrupt handler just got the slab code hot in its
-+ * cache.
-+ */
-+#define RX_RING_SIZE AR2313_DESCR_ENTRIES
-+#define RX_PANIC_THRES (RX_RING_SIZE/4)
-+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
-+#define CRC_LEN 4
-+#define RX_OFFSET 2
-+
-+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-+#define VLAN_HDR 4
-+#else
-+#define VLAN_HDR 0
-+#endif
-+
-+#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
-+
-+#ifdef MODULE
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
-+MODULE_DESCRIPTION("AR231x Ethernet driver");
-+#endif
-+
-+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-+
-+// prototypes
-+static void ar231x_halt(struct net_device *dev);
-+static void rx_tasklet_func(unsigned long data);
-+static void rx_tasklet_cleanup(struct net_device *dev);
-+static void ar231x_multicast_list(struct net_device *dev);
-+
-+static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
-+static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
-+static int ar231x_mdiobus_reset(struct mii_bus *bus);
-+static int ar231x_mdiobus_probe (struct net_device *dev);
-+static void ar231x_adjust_link(struct net_device *dev);
-+
-+#ifndef ERR
-+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-+#endif
-+
-+static const struct net_device_ops ar231x_ops = {
-+ .ndo_open = ar231x_open,
-+ .ndo_stop = ar231x_close,
-+ .ndo_start_xmit = ar231x_start_xmit,
-+ .ndo_set_multicast_list = ar231x_multicast_list,
-+ .ndo_do_ioctl = ar231x_ioctl,
-+};
-+
-+int __init ar231x_probe(struct platform_device *pdev)
-+{
-+ struct net_device *dev;
-+ struct ar231x_private *sp;
-+ struct resource *res;
-+ unsigned long ar_eth_base;
-+ char buf[64];
-+
-+ dev = alloc_etherdev(sizeof(struct ar231x_private));
-+
-+ if (dev == NULL) {
-+ printk(KERN_ERR
-+ "ar231x: Unable to allocate net_device structure!\n");
-+ return -ENOMEM;
-+ }
-+
-+ platform_set_drvdata(pdev, dev);
-+
-+ sp = netdev_priv(dev);
-+ sp->dev = dev;
-+ sp->cfg = pdev->dev.platform_data;
-+
-+ sprintf(buf, "eth%d_membase", pdev->id);
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
-+ if (!res)
-+ return -ENODEV;
-+
-+ sp->link = 0;
-+ ar_eth_base = res->start;
-+
-+ sprintf(buf, "eth%d_irq", pdev->id);
-+ dev->irq = platform_get_irq_byname(pdev, buf);
-+
-+ spin_lock_init(&sp->lock);
-+
-+ dev->features |= NETIF_F_HIGHDMA;
-+ dev->netdev_ops = &ar231x_ops;
-+
-+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ sp->eth_regs =
-+ ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
-+ if (!sp->eth_regs) {
-+ printk("Can't remap eth registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ /*
-+ * When there's only one MAC, PHY regs are typically on ENET0,
-+ * even though the MAC might be on ENET1.
-+ * Needto remap PHY regs separately in this case
-+ */
-+ if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
-+ sp->phy_regs = sp->eth_regs;
-+ else {
-+ sp->phy_regs =
-+ ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
-+ sizeof(*sp->phy_regs));
-+ if (!sp->phy_regs) {
-+ printk("Can't remap phy registers\n");
-+ return (-ENXIO);
-+ }
-+ }
-+
-+ sp->dma_regs =
-+ ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
-+ sizeof(*sp->dma_regs));
-+ dev->base_addr = (unsigned int) sp->dma_regs;
-+ if (!sp->dma_regs) {
-+ printk("Can't remap DMA registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
-+ if (!sp->int_regs) {
-+ printk("Can't remap INTERRUPT registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
-+ sp->name[sizeof(sp->name) - 1] = '\0';
-+ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
-+
-+ if (ar231x_init(dev)) {
-+ /*
-+ * ar231x_init() calls ar231x_init_cleanup() on error.
-+ */
-+ kfree(dev);
-+ return -ENODEV;
-+ }
-+
-+ if (register_netdev(dev)) {
-+ printk("%s: register_netdev failed\n", __func__);
-+ return -1;
-+ }
-+
-+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
-+ dev->name, sp->name,
-+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
-+
-+ sp->mii_bus = mdiobus_alloc();
-+ if (sp->mii_bus == NULL)
-+ return -1;
-+
-+ sp->mii_bus->priv = dev;
-+ sp->mii_bus->read = ar231x_mdiobus_read;
-+ sp->mii_bus->write = ar231x_mdiobus_write;
-+ sp->mii_bus->reset = ar231x_mdiobus_reset;
-+ sp->mii_bus->name = "ar231x_eth_mii";
-+ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
-+ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
-+ *sp->mii_bus->irq = PHY_POLL;
-+
-+ mdiobus_register(sp->mii_bus);
-+
-+ if (ar231x_mdiobus_probe(dev) != 0) {
-+ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
-+ rx_tasklet_cleanup(dev);
-+ ar231x_init_cleanup(dev);
-+ unregister_netdev(dev);
-+ kfree(dev);
-+ return -ENODEV;
-+ }
-+
-+ /* start link poll timer */
-+ ar231x_setup_timer(dev);
-+
-+ return 0;
-+}
-+
-+
-+static void ar231x_multicast_list(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int filter;
-+
-+ filter = sp->eth_regs->mac_control;
-+
-+ if (dev->flags & IFF_PROMISC)
-+ filter |= MAC_CONTROL_PR;
-+ else
-+ filter &= ~MAC_CONTROL_PR;
-+ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0))
-+ filter |= MAC_CONTROL_PM;
-+ else
-+ filter &= ~MAC_CONTROL_PM;
-+
-+ sp->eth_regs->mac_control = filter;
-+}
-+
-+static void rx_tasklet_cleanup(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ /*
-+ * Tasklet may be scheduled. Need to get it removed from the list
-+ * since we're about to free the struct.
-+ */
-+
-+ sp->unloading = 1;
-+ tasklet_enable(&sp->rx_tasklet);
-+ tasklet_kill(&sp->rx_tasklet);
-+}
-+
-+static int __devexit ar231x_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ rx_tasklet_cleanup(dev);
-+ ar231x_init_cleanup(dev);
-+ unregister_netdev(dev);
-+ mdiobus_unregister(sp->mii_bus);
-+ mdiobus_free(sp->mii_bus);
-+ kfree(dev);
-+ return 0;
-+}
-+
-+
-+/*
-+ * Restart the AR2313 ethernet controller.
-+ */
-+static int ar231x_restart(struct net_device *dev)
-+{
-+ /* disable interrupts */
-+ disable_irq(dev->irq);
-+
-+ /* stop mac */
-+ ar231x_halt(dev);
-+
-+ /* initialize */
-+ ar231x_init(dev);
-+
-+ /* enable interrupts */
-+ enable_irq(dev->irq);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ar231x_driver = {
-+ .driver.name = "ar231x-eth",
-+ .probe = ar231x_probe,
-+ .remove = __devexit_p(ar231x_remove),
-+};
-+
-+int __init ar231x_module_init(void)
-+{
-+ return platform_driver_register(&ar231x_driver);
-+}
-+
-+void __exit ar231x_module_cleanup(void)
-+{
-+ platform_driver_unregister(&ar231x_driver);
-+}
-+
-+module_init(ar231x_module_init);
-+module_exit(ar231x_module_cleanup);
-+
-+
-+static void ar231x_free_descriptors(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ if (sp->rx_ring != NULL) {
-+ kfree((void *) KSEG0ADDR(sp->rx_ring));
-+ sp->rx_ring = NULL;
-+ sp->tx_ring = NULL;
-+ }
-+}
-+
-+
-+static int ar231x_allocate_descriptors(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int size;
-+ int j;
-+ ar231x_descr_t *space;
-+
-+ if (sp->rx_ring != NULL) {
-+ printk("%s: already done.\n", __FUNCTION__);
-+ return 0;
-+ }
-+
-+ size =
-+ (sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
-+ space = kmalloc(size, GFP_KERNEL);
-+ if (space == NULL)
-+ return 1;
-+
-+ /* invalidate caches */
-+ dma_cache_inv((unsigned int) space, size);
-+
-+ /* now convert pointer to KSEG1 */
-+ space = (ar231x_descr_t *) KSEG1ADDR(space);
-+
-+ memset((void *) space, 0, size);
-+
-+ sp->rx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ sp->tx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ /* Initialize the transmit Descriptors */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ ar231x_descr_t *td = &sp->tx_ring[j];
-+ td->status = 0;
-+ td->devcs = DMA_TX1_CHAINED;
-+ td->addr = 0;
-+ td->descr =
-+ virt_to_phys(&sp->
-+ tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * Generic cleanup handling data allocated during init. Used when the
-+ * module is unloaded or if an error occurs during initialization
-+ */
-+static void ar231x_init_cleanup(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ struct sk_buff *skb;
-+ int j;
-+
-+ ar231x_free_descriptors(dev);
-+
-+ if (sp->eth_regs)
-+ iounmap((void *) sp->eth_regs);
-+ if (sp->dma_regs)
-+ iounmap((void *) sp->dma_regs);
-+
-+ if (sp->rx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->rx_skb[j];
-+ if (skb) {
-+ sp->rx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->rx_skb);
-+ sp->rx_skb = NULL;
-+ }
-+
-+ if (sp->tx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ sp->tx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->tx_skb);
-+ sp->tx_skb = NULL;
-+ }
-+}
-+
-+static int ar231x_setup_timer(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ init_timer(&sp->link_timer);
-+
-+ sp->link_timer.function = ar231x_link_timer_fn;
-+ sp->link_timer.data = (int) dev;
-+ sp->link_timer.expires = jiffies + HZ;
-+
-+ add_timer(&sp->link_timer);
-+ return 0;
-+
-+}
-+
-+static void ar231x_link_timer_fn(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ // see if the link status changed
-+ // This was needed to make sure we set the PHY to the
-+ // autonegotiated value of half or full duplex.
-+ ar231x_check_link(dev);
-+
-+ // Loop faster when we don't have link.
-+ // This was needed to speed up the AP bootstrap time.
-+ if (sp->link == 0) {
-+ mod_timer(&sp->link_timer, jiffies + HZ / 2);
-+ } else {
-+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
-+ }
-+}
-+
-+static void ar231x_check_link(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ u16 phyData;
-+
-+ phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
-+ if (sp->phyData != phyData) {
-+ if (phyData & BMSR_LSTATUS) {
-+ /* link is present, ready link partner ability to deterine
-+ duplexity */
-+ int duplex = 0;
-+ u16 reg;
-+
-+ sp->link = 1;
-+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
-+ if (reg & BMCR_ANENABLE) {
-+ /* auto neg enabled */
-+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
-+ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
-+ } else {
-+ /* no auto neg, just read duplex config */
-+ duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
-+ }
-+
-+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
-+ dev->name, (duplex) ? "full" : "half");
-+
-+ if (duplex) {
-+ /* full duplex */
-+ sp->eth_regs->mac_control =
-+ ((sp->eth_regs->
-+ mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
-+ } else {
-+ /* half duplex */
-+ sp->eth_regs->mac_control =
-+ ((sp->eth_regs->
-+ mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
-+ }
-+ } else {
-+ /* no link */
-+ sp->link = 0;
-+ }
-+ sp->phyData = phyData;
-+ }
-+}
-+
-+static int ar231x_reset_reg(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int ethsal, ethsah;
-+ unsigned int flags;
-+
-+ *sp->int_regs |= sp->cfg->reset_mac;
-+ mdelay(10);
-+ *sp->int_regs &= ~sp->cfg->reset_mac;
-+ mdelay(10);
-+ *sp->int_regs |= sp->cfg->reset_phy;
-+ mdelay(10);
-+ *sp->int_regs &= ~sp->cfg->reset_phy;
-+ mdelay(10);
-+
-+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
-+ mdelay(10);
-+ sp->dma_regs->bus_mode =
-+ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-+
-+ /* enable interrupts */
-+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
-+ DMA_STATUS_NIS |
-+ DMA_STATUS_RI |
-+ DMA_STATUS_TI | DMA_STATUS_FBE);
-+ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
-+ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
-+ sp->dma_regs->control =
-+ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-+
-+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
-+ sp->eth_regs->vlan_tag = (0x8100);
-+
-+ /* Enable Ethernet Interface */
-+ flags = (MAC_CONTROL_TE | /* transmit enable */
-+ MAC_CONTROL_PM | /* pass mcast */
-+ MAC_CONTROL_F | /* full duplex */
-+ MAC_CONTROL_HBD); /* heart beat disabled */
-+
-+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
-+ flags |= MAC_CONTROL_PR;
-+ }
-+ sp->eth_regs->mac_control = flags;
-+
-+ /* Set all Ethernet station address registers to their initial values */
-+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-+
-+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-+
-+ sp->eth_regs->mac_addr[0] = ethsah;
-+ sp->eth_regs->mac_addr[1] = ethsal;
-+
-+ mdelay(10);
-+
-+ return (0);
-+}
-+
-+
-+static int ar231x_init(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int ecode = 0;
-+
-+ /*
-+ * Allocate descriptors
-+ */
-+ if (ar231x_allocate_descriptors(dev)) {
-+ printk("%s: %s: ar231x_allocate_descriptors failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+
-+ /*
-+ * Get the memory for the skb rings.
-+ */
-+ if (sp->rx_skb == NULL) {
-+ sp->rx_skb =
-+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+ GFP_KERNEL);
-+ if (!(sp->rx_skb)) {
-+ printk("%s: %s: rx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ if (sp->tx_skb == NULL) {
-+ sp->tx_skb =
-+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+ GFP_KERNEL);
-+ if (!(sp->tx_skb)) {
-+ printk("%s: %s: tx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ /*
-+ * Set tx_csm before we start receiving interrupts, otherwise
-+ * the interrupt handler might think it is supposed to process
-+ * tx ints before we are up and running, which may cause a null
-+ * pointer access in the int handler.
-+ */
-+ sp->rx_skbprd = 0;
-+ sp->cur_rx = 0;
-+ sp->tx_prd = 0;
-+ sp->tx_csm = 0;
-+
-+ /*
-+ * Zero the stats before starting the interface
-+ */
-+ memset(&dev->stats, 0, sizeof(dev->stats));
-+
-+ /*
-+ * We load the ring here as there seem to be no way to tell the
-+ * firmware to wipe the ring without re-initializing it.
-+ */
-+ ar231x_load_rx_ring(dev, RX_RING_SIZE);
-+
-+ /*
-+ * Init hardware
-+ */
-+ ar231x_reset_reg(dev);
-+
-+ /*
-+ * Get the IRQ
-+ */
-+ ecode =
-+ request_irq(dev->irq, &ar231x_interrupt,
-+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-+ dev->name, dev);
-+ if (ecode) {
-+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
-+ dev->name, __FUNCTION__, dev->irq);
-+ goto init_error;
-+ }
-+
-+
-+ tasklet_enable(&sp->rx_tasklet);
-+
-+ return 0;
-+
-+ init_error:
-+ ar231x_init_cleanup(dev);
-+ return ecode;
-+}
-+
-+/*
-+ * Load the rx ring.
-+ *
-+ * Loading rings is safe without holding the spin lock since this is
-+ * done only before the device is enabled, thus no interrupts are
-+ * generated and by the interrupt handler/tasklet handler.
-+ */
-+static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
-+{
-+
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ short i, idx;
-+
-+ idx = sp->rx_skbprd;
-+
-+ for (i = 0; i < nr_bufs; i++) {
-+ struct sk_buff *skb;
-+ ar231x_descr_t *rd;
-+
-+ if (sp->rx_skb[idx])
-+ break;
-+
-+ skb = netdev_alloc_skb(dev, AR2313_BUFSIZE);
-+ if (!skb) {
-+ printk("\n\n\n\n %s: No memory in system\n\n\n\n",
-+ __FUNCTION__);
-+ break;
-+ }
-+
-+ /*
-+ * Make sure IP header starts on a fresh cache line.
-+ */
-+ skb->dev = dev;
-+ skb_reserve(skb, RX_OFFSET);
-+ sp->rx_skb[idx] = skb;
-+
-+ rd = (ar231x_descr_t *) & sp->rx_ring[idx];
-+
-+ /* initialize dma descriptor */
-+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rd->addr = virt_to_phys(skb->data);
-+ rd->descr =
-+ virt_to_phys(&sp->
-+ rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-+ rd->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ if (i)
-+ sp->rx_skbprd = idx;
-+
-+ return;
-+}
-+
-+#define AR2313_MAX_PKTS_PER_CALL 64
-+
-+static int ar231x_rx_int(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ struct sk_buff *skb, *skb_new;
-+ ar231x_descr_t *rxdesc;
-+ unsigned int status;
-+ u32 idx;
-+ int pkts = 0;
-+ int rval;
-+
-+ idx = sp->cur_rx;
-+
-+ /* process at most the entire ring and then wait for another interrupt
-+ */
-+ while (1) {
-+
-+ rxdesc = &sp->rx_ring[idx];
-+ status = rxdesc->status;
-+ if (status & DMA_RX_OWN) {
-+ /* SiByte owns descriptor or descr not yet filled in */
-+ rval = 0;
-+ break;
-+ }
-+
-+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
-+ rval = 1;
-+ break;
-+ }
-+
-+ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
-+ dev->stats.rx_errors++;
-+ dev->stats.rx_dropped++;
-+
-+ /* add statistics counters */
-+ if (status & DMA_RX_ERR_CRC)
-+ dev->stats.rx_crc_errors++;
-+ if (status & DMA_RX_ERR_COL)
-+ dev->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_LENGTH)
-+ dev->stats.rx_length_errors++;
-+ if (status & DMA_RX_ERR_RUNT)
-+ dev->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_DESC)
-+ dev->stats.rx_over_errors++;
-+
-+ } else {
-+ /* alloc new buffer. */
-+ skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
-+ if (skb_new != NULL) {
-+
-+ skb = sp->rx_skb[idx];
-+ /* set skb */
-+ skb_put(skb,
-+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
-+
-+ dev->stats.rx_bytes += skb->len;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ /* pass the packet to upper layers */
-+ netif_rx(skb);
-+
-+ skb_new->dev = dev;
-+ /* 16 bit align */
-+ skb_reserve(skb_new, RX_OFFSET);
-+ /* reset descriptor's curr_addr */
-+ rxdesc->addr = virt_to_phys(skb_new->data);
-+
-+ dev->stats.rx_packets++;
-+ sp->rx_skb[idx] = skb_new;
-+ } else {
-+ dev->stats.rx_dropped++;
-+ }
-+ }
-+
-+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rxdesc->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ sp->cur_rx = idx;
-+
-+ return rval;
-+}
-+
-+
-+static void ar231x_tx_int(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ u32 idx;
-+ struct sk_buff *skb;
-+ ar231x_descr_t *txdesc;
-+ unsigned int status = 0;
-+
-+ idx = sp->tx_csm;
-+
-+ while (idx != sp->tx_prd) {
-+ txdesc = &sp->tx_ring[idx];
-+
-+ if ((status = txdesc->status) & DMA_TX_OWN) {
-+ /* ar231x dma still owns descr */
-+ break;
-+ }
-+ /* done with this descriptor */
-+ dma_unmap_single(NULL, txdesc->addr,
-+ txdesc->devcs & DMA_TX1_BSIZE_MASK,
-+ DMA_TO_DEVICE);
-+ txdesc->status = 0;
-+
-+ if (status & DMA_TX_ERROR) {
-+ dev->stats.tx_errors++;
-+ dev->stats.tx_dropped++;
-+ if (status & DMA_TX_ERR_UNDER)
-+ dev->stats.tx_fifo_errors++;
-+ if (status & DMA_TX_ERR_HB)
-+ dev->stats.tx_heartbeat_errors++;
-+ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
-+ dev->stats.tx_carrier_errors++;
-+ if (status & (DMA_TX_ERR_LATE |
-+ DMA_TX_ERR_COL |
-+ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
-+ dev->stats.tx_aborted_errors++;
-+ } else {
-+ /* transmit OK */
-+ dev->stats.tx_packets++;
-+ }
-+
-+ skb = sp->tx_skb[idx];
-+ sp->tx_skb[idx] = NULL;
-+ idx = DSC_NEXT(idx);
-+ dev->stats.tx_bytes += skb->len;
-+ dev_kfree_skb_irq(skb);
-+ }
-+
-+ sp->tx_csm = idx;
-+
-+ return;
-+}
-+
-+
-+static void rx_tasklet_func(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ if (sp->unloading) {
-+ return;
-+ }
-+
-+ if (ar231x_rx_int(dev)) {
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+ } else {
-+ unsigned long flags;
-+ spin_lock_irqsave(&sp->lock, flags);
-+ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+ }
-+}
-+
-+static void rx_schedule(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-+
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+}
-+
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int status, enabled;
-+
-+ /* clear interrupt */
-+ /*
-+ * Don't clear RI bit if currently disabled.
-+ */
-+ status = sp->dma_regs->status;
-+ enabled = sp->dma_regs->intr_ena;
-+ sp->dma_regs->status = status & enabled;
-+
-+ if (status & DMA_STATUS_NIS) {
-+ /* normal status */
-+ /*
-+ * Don't schedule rx processing if interrupt
-+ * is already disabled.
-+ */
-+ if (status & enabled & DMA_STATUS_RI) {
-+ /* receive interrupt */
-+ rx_schedule(dev);
-+ }
-+ if (status & DMA_STATUS_TI) {
-+ /* transmit interrupt */
-+ ar231x_tx_int(dev);
-+ }
-+ }
-+
-+ /* abnormal status */
-+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
-+ ar231x_restart(dev);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int ar231x_open(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int ethsal, ethsah;
-+
-+ /* reset the hardware, in case the MAC address changed */
-+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-+
-+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-+
-+ sp->eth_regs->mac_addr[0] = ethsah;
-+ sp->eth_regs->mac_addr[1] = ethsal;
-+
-+ mdelay(10);
-+
-+ dev->mtu = 1500;
-+ netif_start_queue(dev);
-+
-+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-+
-+ return 0;
-+}
-+
-+static void ar231x_halt(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int j;
-+
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ /* kill the MAC */
-+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
-+ MAC_CONTROL_TE); /* disable Transmits */
-+ /* stop dma */
-+ sp->dma_regs->control = 0;
-+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-+
-+ /* place phy and MAC in reset */
-+ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
-+
-+ /* free buffers on tx ring */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ struct sk_buff *skb;
-+ ar231x_descr_t *txdesc;
-+
-+ txdesc = &sp->tx_ring[j];
-+ txdesc->descr = 0;
-+
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ dev_kfree_skb(skb);
-+ sp->tx_skb[j] = NULL;
-+ }
-+ }
-+}
-+
-+/*
-+ * close should do nothing. Here's why. It's called when
-+ * 'ifconfig bond0 down' is run. If it calls free_irq then
-+ * the irq is gone forever ! When bond0 is made 'up' again,
-+ * the ar231x_open () does not call request_irq (). Worse,
-+ * the call to ar231x_halt() generates a WDOG reset due to
-+ * the write to 'sp->int_regs' and the box reboots.
-+ * Commenting this out is good since it allows the
-+ * system to resume when bond0 is made up again.
-+ */
-+static int ar231x_close(struct net_device *dev)
-+{
-+#if 0
-+ /*
-+ * Disable interrupts
-+ */
-+ disable_irq(dev->irq);
-+
-+ /*
-+ * Without (or before) releasing irq and stopping hardware, this
-+ * is an absolute non-sense, by the way. It will be reset instantly
-+ * by the first irq.
-+ */
-+ netif_stop_queue(dev);
-+
-+ /* stop the MAC and DMA engines */
-+ ar231x_halt(dev);
-+
-+ /* release the interrupt */
-+ free_irq(dev->irq, dev);
-+
-+#endif
-+ return 0;
-+}
-+
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ ar231x_descr_t *td;
-+ u32 idx;
-+
-+ idx = sp->tx_prd;
-+ td = &sp->tx_ring[idx];
-+
-+ if (td->status & DMA_TX_OWN) {
-+ /* free skbuf and lie to the caller that we sent it out */
-+ dev->stats.tx_dropped++;
-+ dev_kfree_skb(skb);
-+
-+ /* restart transmitter in case locked */
-+ sp->dma_regs->xmt_poll = 0;
-+ return 0;
-+ }
-+
-+ /* Setup the transmit descriptor. */
-+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
-+ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
-+ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+ td->status = DMA_TX_OWN;
-+
-+ /* kick transmitter last */
-+ sp->dma_regs->xmt_poll = 0;
-+
-+ sp->tx_skb[idx] = skb;
-+ idx = DSC_NEXT(idx);
-+ sp->tx_prd = idx;
-+
-+ return 0;
-+}
-+
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int ret;
-+
-+ switch (cmd) {
-+
-+ case SIOCETHTOOL:
-+ spin_lock_irq(&sp->lock);
-+ ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
-+ spin_unlock_irq(&sp->lock);
-+ return ret;
-+
-+ case SIOCSIFHWADDR:
-+ if (copy_from_user
-+ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case SIOCGIFHWADDR:
-+ if (copy_to_user
-+ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case SIOCGMIIPHY:
-+ case SIOCGMIIREG:
-+ case SIOCSMIIREG:
-+ return phy_mii_ioctl(sp->phy_dev, data, cmd);
-+
-+ default:
-+ break;
-+ }
-+
-+ return -EOPNOTSUPP;
-+}
-+
-+static void ar231x_adjust_link(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int mc;
-+
-+ if (!sp->phy_dev->link)
-+ return;
-+
-+ if (sp->phy_dev->duplex != sp->oldduplex) {
-+ mc = readl(&sp->eth_regs->mac_control);
-+ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
-+ if (sp->phy_dev->duplex)
-+ mc |= MAC_CONTROL_F;
-+ else
-+ mc |= MAC_CONTROL_DRO;
-+ writel(mc, &sp->eth_regs->mac_control);
-+ sp->oldduplex = sp->phy_dev->duplex;
-+ }
-+}
-+
-+#define MII_ADDR(phy, reg) \
-+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
-+
-+static int
-+ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
-+{
-+ struct net_device *const dev = bus->priv;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-+
-+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ return (ethernet->mii_data >> MII_DATA_SHIFT);
-+}
-+
-+static int
-+ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
-+ u16 value)
-+{
-+ struct net_device *const dev = bus->priv;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-+
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ ethernet->mii_data = value << MII_DATA_SHIFT;
-+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
-+
-+ return 0;
-+}
-+
-+static int ar231x_mdiobus_reset(struct mii_bus *bus)
-+{
-+ struct net_device *const dev = bus->priv;
-+
-+ ar231x_reset_reg(dev);
-+
-+ return 0;
-+}
-+
-+static int ar231x_mdiobus_probe (struct net_device *dev)
-+{
-+ struct ar231x_private *const sp = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ int phy_addr;
-+
-+ /* find the first (lowest address) PHY on the current MAC's MII bus */
-+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
-+ if (sp->mii_bus->phy_map[phy_addr]) {
-+ phydev = sp->mii_bus->phy_map[phy_addr];
-+ sp->phy = phy_addr;
-+ break; /* break out with first one found */
-+ }
-+
-+ if (!phydev) {
-+ printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
-+ return -1;
-+ }
-+
-+ /* now we are supposed to have a proper phydev, to attach to... */
-+ BUG_ON(!phydev);
-+ BUG_ON(phydev->attached_dev);
-+
-+ phydev = phy_connect(dev, dev_name(&phydev->dev), &ar231x_adjust_link, 0,
-+ PHY_INTERFACE_MODE_MII);
-+
-+ if (IS_ERR(phydev)) {
-+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+ return PTR_ERR(phydev);
-+ }
-+
-+ /* mask with MAC supported features */
-+ phydev->supported &= (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_Autoneg
-+ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
-+
-+ phydev->advertising = phydev->supported;
-+
-+ sp->oldduplex = -1;
-+ sp->phy_dev = phydev;
-+
-+ printk(KERN_INFO "%s: attached PHY driver [%s] "
-+ "(mii_bus:phy_addr=%s)\n",
-+ dev->name, phydev->drv->name, dev_name(&phydev->dev));
-+
-+ return 0;
-+}
-+
---- /dev/null
-+++ b/drivers/net/ar231x.h
-@@ -0,0 +1,302 @@
-+/*
-+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef _AR2313_H_
-+#define _AR2313_H_
-+
-+#include <linux/autoconf.h>
-+#include <linux/bitops.h>
-+#include <asm/bootinfo.h>
-+#include <ar231x_platform.h>
-+
-+/*
-+ * probe link timer - 5 secs
-+ */
-+#define LINK_TIMER (5*HZ)
-+
-+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
-+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
-+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
-+
-+#define AR2313_TX_TIMEOUT (HZ/4)
-+
-+/*
-+ * Rings
-+ */
-+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
-+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
-+
-+#define AR2313_MBGET 2
-+#define AR2313_MBSET 3
-+#define AR2313_PCI_RECONFIG 4
-+#define AR2313_PCI_DUMP 5
-+#define AR2313_TEST_PANIC 6
-+#define AR2313_TEST_NULLPTR 7
-+#define AR2313_READ_DATA 8
-+#define AR2313_WRITE_DATA 9
-+#define AR2313_GET_VERSION 10
-+#define AR2313_TEST_HANG 11
-+#define AR2313_SYNC 12
-+
-+#define DMA_RX_ERR_CRC BIT(1)
-+#define DMA_RX_ERR_DRIB BIT(2)
-+#define DMA_RX_ERR_MII BIT(3)
-+#define DMA_RX_EV2 BIT(5)
-+#define DMA_RX_ERR_COL BIT(6)
-+#define DMA_RX_LONG BIT(7)
-+#define DMA_RX_LS BIT(8) /* last descriptor */
-+#define DMA_RX_FS BIT(9) /* first descriptor */
-+#define DMA_RX_MF BIT(10) /* multicast frame */
-+#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */
-+#define DMA_RX_ERR_LENGTH BIT(12) /* length error */
-+#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */
-+#define DMA_RX_ERROR BIT(15) /* error summary */
-+#define DMA_RX_LEN_MASK 0x3fff0000
-+#define DMA_RX_LEN_SHIFT 16
-+#define DMA_RX_FILT BIT(30)
-+#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */
-+
-+#define DMA_RX1_BSIZE_MASK 0x000007ff
-+#define DMA_RX1_BSIZE_SHIFT 0
-+#define DMA_RX1_CHAINED BIT(24)
-+#define DMA_RX1_RER BIT(25)
-+
-+#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */
-+#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */
-+#define DMA_TX_COL_MASK 0x78
-+#define DMA_TX_COL_SHIFT 3
-+#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */
-+#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */
-+#define DMA_TX_ERR_LATE BIT(9) /* late collision */
-+#define DMA_TX_ERR_LINK BIT(10) /* no carrier */
-+#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */
-+#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */
-+#define DMA_TX_ERROR BIT(15) /* frame aborted */
-+#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */
-+
-+#define DMA_TX1_BSIZE_MASK 0x000007ff
-+#define DMA_TX1_BSIZE_SHIFT 0
-+#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */
-+#define DMA_TX1_TER BIT(25) /* transmit end of ring */
-+#define DMA_TX1_FS BIT(29) /* first segment */
-+#define DMA_TX1_LS BIT(30) /* last segment */
-+#define DMA_TX1_IC BIT(31) /* interrupt on completion */
-+
-+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
-+
-+#define MAC_CONTROL_RE BIT(2) /* receive enable */
-+#define MAC_CONTROL_TE BIT(3) /* transmit enable */
-+#define MAC_CONTROL_DC BIT(5) /* Deferral check */
-+#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */
-+#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */
-+#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */
-+#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */
-+#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */
-+#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */
-+#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */
-+#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */
-+#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */
-+#define MAC_CONTROL_PR BIT(18) /* promiscuous mode (valid frames only) */
-+#define MAC_CONTROL_PM BIT(19) /* pass multicast */
-+#define MAC_CONTROL_F BIT(20) /* full-duplex */
-+#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */
-+#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */
-+#define MAC_CONTROL_BLE BIT(30) /* big endian mode */
-+#define MAC_CONTROL_RA BIT(31) /* receive all (valid and invalid frames) */
-+
-+#define MII_ADDR_BUSY BIT(0)
-+#define MII_ADDR_WRITE BIT(1)
-+#define MII_ADDR_REG_SHIFT 6
-+#define MII_ADDR_PHY_SHIFT 11
-+#define MII_DATA_SHIFT 0
-+
-+#define FLOW_CONTROL_FCE BIT(1)
-+
-+#define DMA_BUS_MODE_SWR BIT(0) /* software reset */
-+#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */
-+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
-+#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */
-+
-+#define DMA_STATUS_TI BIT(0) /* transmit interrupt */
-+#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */
-+#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */
-+#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */
-+#define DMA_STATUS_UNF BIT(5) /* transmit underflow */
-+#define DMA_STATUS_RI BIT(6) /* receive interrupt */
-+#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */
-+#define DMA_STATUS_RPS BIT(8) /* receive process stopped */
-+#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */
-+#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */
-+#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */
-+#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */
-+#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */
-+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
-+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
-+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
-+
-+#define DMA_CONTROL_SR BIT(1) /* start receive */
-+#define DMA_CONTROL_ST BIT(13) /* start transmit */
-+#define DMA_CONTROL_SF BIT(21) /* store and forward */
-+
-+
-+typedef struct {
-+ volatile unsigned int status; // OWN, Device control and status.
-+ volatile unsigned int devcs; // pkt Control bits + Length
-+ volatile unsigned int addr; // Current Address.
-+ volatile unsigned int descr; // Next descriptor in chain.
-+} ar231x_descr_t;
-+
-+
-+
-+//
-+// New Combo structure for Both Eth0 AND eth1
-+//
-+typedef struct {
-+ volatile unsigned int mac_control; /* 0x00 */
-+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
-+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
-+ volatile unsigned int mii_addr; /* 0x14 */
-+ volatile unsigned int mii_data; /* 0x18 */
-+ volatile unsigned int flow_control; /* 0x1c */
-+ volatile unsigned int vlan_tag; /* 0x20 */
-+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
-+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
-+
-+} ETHERNET_STRUCT;
-+
-+/********************************************************************
-+ * Interrupt controller
-+ ********************************************************************/
-+
-+typedef struct {
-+ volatile unsigned int wdog_control; /* 0x08 */
-+ volatile unsigned int wdog_timer; /* 0x0c */
-+ volatile unsigned int misc_status; /* 0x10 */
-+ volatile unsigned int misc_mask; /* 0x14 */
-+ volatile unsigned int global_status; /* 0x18 */
-+ volatile unsigned int reserved; /* 0x1c */
-+ volatile unsigned int reset_control; /* 0x20 */
-+} INTERRUPT;
-+
-+/********************************************************************
-+ * DMA controller
-+ ********************************************************************/
-+typedef struct {
-+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
-+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
-+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
-+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
-+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
-+ volatile unsigned int status; /* 0x14 (CSR5) */
-+ volatile unsigned int control; /* 0x18 (CSR6) */
-+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
-+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
-+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
-+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
-+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
-+} DMA;
-+
-+/*
-+ * Struct private for the Sibyte.
-+ *
-+ * Elements are grouped so variables used by the tx handling goes
-+ * together, and will go into the same cache lines etc. in order to
-+ * avoid cache line contention between the rx and tx handling on SMP.
-+ *
-+ * Frequently accessed variables are put at the beginning of the
-+ * struct to help the compiler generate better/shorter code.
-+ */
-+struct ar231x_private {
-+ struct net_device *dev;
-+ int version;
-+ u32 mb[2];
-+
-+ volatile ETHERNET_STRUCT *phy_regs;
-+ volatile ETHERNET_STRUCT *eth_regs;
-+ volatile DMA *dma_regs;
-+ volatile u32 *int_regs;
-+ struct ar231x_eth *cfg;
-+
-+ spinlock_t lock; /* Serialise access to device */
-+
-+ /*
-+ * RX and TX descriptors, must be adjacent
-+ */
-+ ar231x_descr_t *rx_ring;
-+ ar231x_descr_t *tx_ring;
-+
-+
-+ struct sk_buff **rx_skb;
-+ struct sk_buff **tx_skb;
-+
-+ /*
-+ * RX elements
-+ */
-+ u32 rx_skbprd;
-+ u32 cur_rx;
-+
-+ /*
-+ * TX elements
-+ */
-+ u32 tx_prd;
-+ u32 tx_csm;
-+
-+ /*
-+ * Misc elements
-+ */
-+ char name[48];
-+ struct {
-+ u32 address;
-+ u32 length;
-+ char *mapping;
-+ } desc;
-+
-+
-+ struct timer_list link_timer;
-+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
-+ unsigned short mac;
-+ unsigned short link; /* 0 - link down, 1 - link up */
-+ u16 phyData;
-+
-+ struct tasklet_struct rx_tasklet;
-+ int unloading;
-+
-+ struct phy_device *phy_dev;
-+ struct mii_bus *mii_bus;
-+ int oldduplex;
-+};
-+
-+
-+/*
-+ * Prototypes
-+ */
-+static int ar231x_init(struct net_device *dev);
-+#ifdef TX_TIMEOUT
-+static void ar231x_tx_timeout(struct net_device *dev);
-+#endif
-+static int ar231x_restart(struct net_device *dev);
-+static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
-+static int ar231x_open(struct net_device *dev);
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static int ar231x_close(struct net_device *dev);
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr,
-+ int cmd);
-+static void ar231x_init_cleanup(struct net_device *dev);
-+static int ar231x_setup_timer(struct net_device *dev);
-+static void ar231x_link_timer_fn(unsigned long data);
-+static void ar231x_check_link(struct net_device *dev);
-+#endif /* _AR2313_H_ */
diff --git a/target/linux/atheros/patches-2.6.30/120-spiflash.patch b/target/linux/atheros/patches-2.6.30/120-spiflash.patch
deleted file mode 100644
index e632060075..0000000000
--- a/target/linux/atheros/patches-2.6.30/120-spiflash.patch
+++ /dev/null
@@ -1,659 +0,0 @@
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
-@@ -104,6 +104,10 @@ config M25PXX_USE_FAST_READ
- help
- This option enables FAST_READ access supported by ST M25Pxx.
-
-+config MTD_AR2315
-+ tristate "Atheros AR2315+ SPI Flash support"
-+ depends on ATHEROS_AR2315
-+
- config MTD_SLRAM
- tristate "Uncached system RAM"
- help
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o
- obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
-+obj-$(CONFIG_MTD_AR2315) += ar2315.o
---- /dev/null
-+++ b/drivers/mtd/devices/ar2315.c
-@@ -0,0 +1,517 @@
-+
-+/*
-+ * MTD driver for the SPI Flash Memory support on Atheros AR2315
-+ *
-+ * Copyright (c) 2005-2006 Atheros Communications Inc.
-+ * Copyright (C) 2006-2007 FON Technology, SL.
-+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/platform_device.h>
-+#include <linux/sched.h>
-+#include <linux/root_dev.h>
-+#include <linux/delay.h>
-+#include <asm/delay.h>
-+#include <asm/io.h>
-+
-+#include <ar2315_spiflash.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+
-+
-+#define SPIFLASH "spiflash: "
-+#define busy_wait(_priv, _condition, _wait) do { \
-+ while (_condition) { \
-+ spin_unlock_bh(&_priv->lock); \
-+ if (_wait > 1) \
-+ msleep(_wait); \
-+ else if ((_wait == 1) && need_resched()) \
-+ schedule(); \
-+ else \
-+ udelay(1); \
-+ spin_lock_bh(&_priv->lock); \
-+ } \
-+} while (0)
-+
-+enum {
-+ FLASH_NONE,
-+ FLASH_1MB,
-+ FLASH_2MB,
-+ FLASH_4MB,
-+ FLASH_8MB,
-+ FLASH_16MB,
-+};
-+
-+/* Flash configuration table */
-+struct flashconfig {
-+ u32 byte_cnt;
-+ u32 sector_cnt;
-+ u32 sector_size;
-+};
-+
-+const struct flashconfig flashconfig_tbl[] = {
-+ [FLASH_NONE] = { 0, 0, 0},
-+ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE},
-+ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE},
-+ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE},
-+ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE},
-+ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE}
-+};
-+
-+/* Mapping of generic opcodes to STM serial flash opcodes */
-+enum {
-+ SPI_WRITE_ENABLE,
-+ SPI_WRITE_DISABLE,
-+ SPI_RD_STATUS,
-+ SPI_WR_STATUS,
-+ SPI_RD_DATA,
-+ SPI_FAST_RD_DATA,
-+ SPI_PAGE_PROGRAM,
-+ SPI_SECTOR_ERASE,
-+ SPI_BULK_ERASE,
-+ SPI_DEEP_PWRDOWN,
-+ SPI_RD_SIG,
-+};
-+
-+struct opcodes {
-+ __u16 code;
-+ __s8 tx_cnt;
-+ __s8 rx_cnt;
-+};
-+const struct opcodes stm_opcodes[] = {
-+ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
-+ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
-+ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
-+ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
-+ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
-+ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
-+ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
-+ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
-+ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
-+ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
-+ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
-+};
-+
-+/* Driver private data structure */
-+struct spiflash_priv {
-+ struct mtd_info mtd;
-+ void *readaddr; /* memory mapped data for read */
-+ void *mmraddr; /* memory mapped register space */
-+ wait_queue_head_t wq;
-+ spinlock_t lock;
-+ int state;
-+};
-+
-+#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
-+
-+enum {
-+ FL_READY,
-+ FL_READING,
-+ FL_ERASING,
-+ FL_WRITING
-+};
-+
-+/***************************************************************************************************/
-+
-+static u32
-+spiflash_read_reg(struct spiflash_priv *priv, int reg)
-+{
-+ return ar231x_read_reg((u32) priv->mmraddr + reg);
-+}
-+
-+static void
-+spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
-+{
-+ ar231x_write_reg((u32) priv->mmraddr + reg, data);
-+}
-+
-+static u32
-+spiflash_wait_busy(struct spiflash_priv *priv)
-+{
-+ u32 reg;
-+
-+ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
-+ SPI_CTL_BUSY, 0);
-+ return reg;
-+}
-+
-+static u32
-+spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr)
-+{
-+ const struct opcodes *op;
-+ u32 reg, mask;
-+
-+ op = &stm_opcodes[opcode];
-+ reg = spiflash_wait_busy(priv);
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE,
-+ ((u32) op->code) | (addr << 8));
-+
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
-+
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+ spiflash_wait_busy(priv);
-+
-+ if (!op->rx_cnt)
-+ return 0;
-+
-+ reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
-+
-+ switch (op->rx_cnt) {
-+ case 1:
-+ mask = 0x000000ff;
-+ break;
-+ case 2:
-+ mask = 0x0000ffff;
-+ break;
-+ case 3:
-+ mask = 0x00ffffff;
-+ break;
-+ default:
-+ mask = 0xffffffff;
-+ break;
-+ }
-+ reg &= mask;
-+
-+ return reg;
-+}
-+
-+
-+/*
-+ * Probe SPI flash device
-+ * Function returns 0 for failure.
-+ * and flashconfig_tbl array index for success.
-+ */
-+static int
-+spiflash_probe_chip (struct spiflash_priv *priv)
-+{
-+ u32 sig;
-+ int flash_size;
-+
-+ /* Read the signature on the flash device */
-+ spin_lock_bh(&priv->lock);
-+ sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
-+ spin_unlock_bh(&priv->lock);
-+
-+ switch (sig) {
-+ case STM_8MBIT_SIGNATURE:
-+ flash_size = FLASH_1MB;
-+ break;
-+ case STM_16MBIT_SIGNATURE:
-+ flash_size = FLASH_2MB;
-+ break;
-+ case STM_32MBIT_SIGNATURE:
-+ flash_size = FLASH_4MB;
-+ break;
-+ case STM_64MBIT_SIGNATURE:
-+ flash_size = FLASH_8MB;
-+ break;
-+ case STM_128MBIT_SIGNATURE:
-+ flash_size = FLASH_16MB;
-+ break;
-+ default:
-+ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
-+ return 0;
-+ }
-+
-+ return flash_size;
-+}
-+
-+
-+/* wait until the flash chip is ready and grab a lock */
-+static int spiflash_wait_ready(struct spiflash_priv *priv, int state)
-+{
-+ DECLARE_WAITQUEUE(wait, current);
-+
-+retry:
-+ spin_lock_bh(&priv->lock);
-+ if (priv->state != FL_READY) {
-+ set_current_state(TASK_UNINTERRUPTIBLE);
-+ add_wait_queue(&priv->wq, &wait);
-+ spin_unlock_bh(&priv->lock);
-+ schedule();
-+ remove_wait_queue(&priv->wq, &wait);
-+
-+ if(signal_pending(current))
-+ return 0;
-+
-+ goto retry;
-+ }
-+ priv->state = state;
-+
-+ return 1;
-+}
-+
-+static inline void spiflash_done(struct spiflash_priv *priv)
-+{
-+ priv->state = FL_READY;
-+ spin_unlock_bh(&priv->lock);
-+ wake_up(&priv->wq);
-+}
-+
-+static void
-+spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout)
-+{
-+ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
-+ SPI_STATUS_WIP, timeout);
-+ spiflash_done(priv);
-+}
-+
-+
-+
-+static int
-+spiflash_erase (struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ const struct opcodes *op;
-+ u32 temp, reg;
-+
-+ if (instr->addr + instr->len > mtd->size)
-+ return -EINVAL;
-+
-+ if (!spiflash_wait_ready(priv, FL_ERASING))
-+ return -EINTR;
-+
-+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+ reg = spiflash_wait_busy(priv);
-+
-+ op = &stm_opcodes[SPI_SECTOR_ERASE];
-+ temp = ((u32)instr->addr << 8) | (u32)(op->code);
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
-+
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= op->tx_cnt | SPI_CTL_START;
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+ spiflash_wait_complete(priv, 20);
-+
-+ instr->state = MTD_ERASE_DONE;
-+ mtd_erase_callback(instr);
-+
-+ return 0;
-+}
-+
-+static int
-+spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ u8 *read_addr;
-+
-+ if (!len)
-+ return 0;
-+
-+ if (from + len > mtd->size)
-+ return -EINVAL;
-+
-+ *retlen = len;
-+
-+ if (!spiflash_wait_ready(priv, FL_READING))
-+ return -EINTR;
-+
-+ read_addr = (u8 *)(priv->readaddr + from);
-+ memcpy_fromio(buf, read_addr, len);
-+ spiflash_done(priv);
-+
-+ return 0;
-+}
-+
-+static int
-+spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ u32 opcode, bytes_left;
-+
-+ *retlen = 0;
-+
-+ if (!len)
-+ return 0;
-+
-+ if (to + len > mtd->size)
-+ return -EINVAL;
-+
-+ bytes_left = len;
-+
-+ do {
-+ u32 read_len, reg, page_offset, spi_data = 0;
-+
-+ read_len = min(bytes_left, sizeof(u32));
-+
-+ /* 32-bit writes cannot span across a page boundary
-+ * (256 bytes). This types of writes require two page
-+ * program operations to handle it correctly. The STM part
-+ * will write the overflow data to the beginning of the
-+ * current page as opposed to the subsequent page.
-+ */
-+ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
-+
-+ if (page_offset > STM_PAGE_SIZE)
-+ read_len -= (page_offset - STM_PAGE_SIZE);
-+
-+ if (!spiflash_wait_ready(priv, FL_WRITING))
-+ return -EINTR;
-+
-+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+ spi_data = 0;
-+ switch (read_len) {
-+ case 4:
-+ spi_data |= buf[3] << 24;
-+ /* fall through */
-+ case 3:
-+ spi_data |= buf[2] << 16;
-+ /* fall through */
-+ case 2:
-+ spi_data |= buf[1] << 8;
-+ /* fall through */
-+ case 1:
-+ spi_data |= buf[0] & 0xff;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
-+ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
-+ (to & 0x00ffffff) << 8;
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
-+
-+ reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= (read_len + 4) | SPI_CTL_START;
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+ spiflash_wait_complete(priv, 1);
-+
-+ bytes_left -= read_len;
-+ to += read_len;
-+ buf += read_len;
-+
-+ *retlen += read_len;
-+ } while (bytes_left != 0);
-+
-+ return 0;
-+}
-+
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
-+#endif
-+
-+
-+static int
-+spiflash_probe(struct platform_device *pdev)
-+{
-+ struct spiflash_priv *priv;
-+ struct mtd_partition *parts;
-+ struct mtd_info *mtd;
-+ int index, num_parts;
-+ int result = 0;
-+
-+ priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL);
-+ spin_lock_init(&priv->lock);
-+ init_waitqueue_head(&priv->wq);
-+ priv->state = FL_READY;
-+ mtd = &priv->mtd;
-+
-+ priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
-+ if (!priv->mmraddr) {
-+ printk(KERN_WARNING SPIFLASH "Failed to map flash device\n");
-+ goto error;
-+ }
-+
-+ index = spiflash_probe_chip(priv);
-+ if (!index) {
-+ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
-+ goto error;
-+ }
-+
-+ priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
-+ if (!priv->readaddr) {
-+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
-+ goto error;
-+ }
-+
-+ platform_set_drvdata(pdev, priv);
-+ mtd->name = "spiflash";
-+ mtd->type = MTD_NORFLASH;
-+ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
-+ mtd->size = flashconfig_tbl[index].byte_cnt;
-+ mtd->erasesize = flashconfig_tbl[index].sector_size;
-+ mtd->writesize = 1;
-+ mtd->numeraseregions = 0;
-+ mtd->eraseregions = NULL;
-+ mtd->erase = spiflash_erase;
-+ mtd->read = spiflash_read;
-+ mtd->write = spiflash_write;
-+ mtd->owner = THIS_MODULE;
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+ /* parse redboot partitions */
-+ num_parts = parse_mtd_partitions(mtd, part_probe_types, &parts, 0);
-+ if (!num_parts)
-+ goto error;
-+
-+ result = add_mtd_partitions(mtd, parts, num_parts);
-+#endif
-+
-+ return result;
-+
-+error:
-+ if (priv->mmraddr)
-+ iounmap(priv->mmraddr);
-+ kfree(priv);
-+ return -ENXIO;
-+}
-+
-+static int
-+spiflash_remove (struct platform_device *pdev)
-+{
-+ struct spiflash_priv *priv = platform_get_drvdata(pdev);
-+ struct mtd_info *mtd = &priv->mtd;
-+
-+ del_mtd_partitions(mtd);
-+ iounmap(priv->mmraddr);
-+ iounmap(priv->readaddr);
-+ kfree(priv);
-+
-+ return 0;
-+}
-+
-+struct platform_driver spiflash_driver = {
-+ .driver.name = "spiflash",
-+ .probe = spiflash_probe,
-+ .remove = spiflash_remove,
-+};
-+
-+int __init
-+spiflash_init (void)
-+{
-+ return platform_driver_register(&spiflash_driver);
-+}
-+
-+void __exit
-+spiflash_exit (void)
-+{
-+ return platform_driver_unregister(&spiflash_driver);
-+}
-+
-+module_init (spiflash_init);
-+module_exit (spiflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
-+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
-+
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h
-@@ -0,0 +1,116 @@
-+/*
-+ * SPI Flash Memory support header file.
-+ *
-+ * Copyright (c) 2005, Atheros Communications Inc.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __AR2315_SPIFLASH_H
-+#define __AR2315_SPIFLASH_H
-+
-+#define STM_PAGE_SIZE 256
-+
-+#define SFI_WRITE_BUFFER_SIZE 4
-+#define SFI_FLASH_ADDR_MASK 0x00ffffff
-+
-+#define STM_8MBIT_SIGNATURE 0x13
-+#define STM_M25P80_BYTE_COUNT 1048576
-+#define STM_M25P80_SECTOR_COUNT 16
-+#define STM_M25P80_SECTOR_SIZE 0x10000
-+
-+#define STM_16MBIT_SIGNATURE 0x14
-+#define STM_M25P16_BYTE_COUNT 2097152
-+#define STM_M25P16_SECTOR_COUNT 32
-+#define STM_M25P16_SECTOR_SIZE 0x10000
-+
-+#define STM_32MBIT_SIGNATURE 0x15
-+#define STM_M25P32_BYTE_COUNT 4194304
-+#define STM_M25P32_SECTOR_COUNT 64
-+#define STM_M25P32_SECTOR_SIZE 0x10000
-+
-+#define STM_64MBIT_SIGNATURE 0x16
-+#define STM_M25P64_BYTE_COUNT 8388608
-+#define STM_M25P64_SECTOR_COUNT 128
-+#define STM_M25P64_SECTOR_SIZE 0x10000
-+
-+#define STM_128MBIT_SIGNATURE 0x17
-+#define STM_M25P128_BYTE_COUNT 16777216
-+#define STM_M25P128_SECTOR_COUNT 256
-+#define STM_M25P128_SECTOR_SIZE 0x10000
-+
-+#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
-+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
-+#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
-+#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
-+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
-+#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
-+#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
-+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
-+#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
-+#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
-+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
-+#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
-+#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
-+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
-+#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
-+
-+/*
-+ * ST Microelectronics Opcodes for Serial Flash
-+ */
-+
-+#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
-+#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
-+#define STM_OP_RD_STATUS 0x05 /* Read Status */
-+#define STM_OP_WR_STATUS 0x01 /* Write Status */
-+#define STM_OP_RD_DATA 0x03 /* Read Data */
-+#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
-+#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
-+#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
-+#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
-+#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
-+#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
-+
-+#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
-+#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
-+#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
-+#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
-+#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
-+#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+#define AR531XPLUS_SPI_READ 0x08000000
-+#define AR531XPLUS_SPI_MMR 0x11300000
-+#define AR531XPLUS_SPI_MMR_SIZE 12
-+
-+#define AR531XPLUS_SPI_CTL 0x00
-+#define AR531XPLUS_SPI_OPCODE 0x04
-+#define AR531XPLUS_SPI_DATA 0x08
-+
-+#define SPI_FLASH_READ AR531XPLUS_SPI_READ
-+#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
-+#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
-+#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
-+#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
-+#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
-+
-+#define SPI_CTL_START 0x00000100
-+#define SPI_CTL_BUSY 0x00010000
-+#define SPI_CTL_TXCNT_MASK 0x0000000f
-+#define SPI_CTL_RXCNT_MASK 0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
-+#define SPI_CTL_SIZE_MASK 0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK 0x03000000
-+#define SPI_OPCODE_MASK 0x000000ff
-+
-+#define SPI_STATUS_WIP STM_STATUS_WIP
-+
-+#endif
diff --git a/target/linux/atheros/patches-2.6.30/130-watchdog.patch b/target/linux/atheros/patches-2.6.30/130-watchdog.patch
deleted file mode 100644
index dcff4cb046..0000000000
--- a/target/linux/atheros/patches-2.6.30/130-watchdog.patch
+++ /dev/null
@@ -1,228 +0,0 @@
---- /dev/null
-+++ b/drivers/watchdog/ar2315-wtd.c
-@@ -0,0 +1,200 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
-+ * Based on EP93xx and ifxmips wdt driver
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/fs.h>
-+#include <linux/ioport.h>
-+#include <linux/notifier.h>
-+#include <linux/reboot.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+#include <asm/system.h>
-+#include <asm/addrspace.h>
-+#include <ar231x_platform.h>
-+#include <ar2315_regs.h>
-+#include <ar231x.h>
-+
-+#define CLOCK_RATE 40000000
-+#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
-+
-+static int wdt_timeout = 20;
-+static int started = 0;
-+static int in_use = 0;
-+
-+static void
-+ar2315_wdt_enable(void)
-+{
-+ ar231x_write_reg(AR2315_WD, wdt_timeout * CLOCK_RATE);
-+ ar231x_write_reg(AR2315_ISR, 0x80);
-+}
-+
-+static ssize_t
-+ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
-+{
-+ if(len)
-+ ar2315_wdt_enable();
-+ return len;
-+}
-+
-+static int
-+ar2315_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if(in_use)
-+ return -EBUSY;
-+ ar2315_wdt_enable();
-+ in_use = started = 1;
-+ return nonseekable_open(inode, file);
-+}
-+
-+static int
-+ar2315_wdt_release(struct inode *inode, struct file *file)
-+{
-+ in_use = 0;
-+ return 0;
-+}
-+
-+static irqreturn_t
-+ar2315_wdt_interrupt(int irq, void *dev_id)
-+{
-+ if(started)
-+ {
-+ printk(KERN_CRIT "watchdog expired, rebooting system\n");
-+ emergency_restart();
-+ } else {
-+ ar231x_write_reg(AR2315_WDC, 0);
-+ ar231x_write_reg(AR2315_WD, 0);
-+ ar231x_write_reg(AR2315_ISR, 0x80);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static struct watchdog_info ident = {
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+ .identity = "ar2315 Watchdog",
-+};
-+
-+static int
-+ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ int new_wdt_timeout;
-+ int ret = -ENOIOCTLCMD;
-+
-+ switch(cmd)
-+ {
-+ case WDIOC_GETSUPPORT:
-+ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
-+ break;
-+
-+ case WDIOC_KEEPALIVE:
-+ ar2315_wdt_enable();
-+ ret = 0;
-+ break;
-+
-+ case WDIOC_SETTIMEOUT:
-+ if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
-+ break;
-+ wdt_timeout = HEARTBEAT(new_wdt_timeout);
-+ ar2315_wdt_enable();
-+ break;
-+
-+ case WDIOC_GETTIMEOUT:
-+ ret = put_user(wdt_timeout, (int __user *)arg);
-+ break;
-+ }
-+ return ret;
-+}
-+
-+static struct file_operations ar2315_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .write = ar2315_wdt_write,
-+ .ioctl = ar2315_wdt_ioctl,
-+ .open = ar2315_wdt_open,
-+ .release = ar2315_wdt_release,
-+};
-+
-+static struct miscdevice ar2315_wdt_miscdev = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &ar2315_wdt_fops,
-+};
-+
-+static int
-+ar2315_wdt_probe(struct platform_device *dev)
-+{
-+ int ret = 0;
-+
-+ ar2315_wdt_enable();
-+ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
-+ if(ret)
-+ {
-+ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
-+ goto out;
-+ }
-+
-+ ret = misc_register(&ar2315_wdt_miscdev);
-+ if(ret)
-+ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
-+
-+out:
-+ return ret;
-+}
-+
-+static int
-+ar2315_wdt_remove(struct platform_device *dev)
-+{
-+ misc_deregister(&ar2315_wdt_miscdev);
-+ free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver ar2315_wdt_driver = {
-+ .probe = ar2315_wdt_probe,
-+ .remove = ar2315_wdt_remove,
-+ .driver = {
-+ .name = "ar2315_wdt",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init
-+init_ar2315_wdt(void)
-+{
-+ int ret = platform_driver_register(&ar2315_wdt_driver);
-+ if(ret)
-+ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
-+ return ret;
-+}
-+
-+static void __exit
-+exit_ar2315_wdt(void)
-+{
-+ platform_driver_unregister(&ar2315_wdt_driver);
-+}
-+
-+module_init(init_ar2315_wdt);
-+module_exit(exit_ar2315_wdt);
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -764,6 +764,12 @@ config TXX9_WDT
- help
- Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-
-+config ATHEROS_WDT
-+ tristate "Atheros wisoc Watchdog Timer"
-+ depends on ATHEROS_AR231X
-+ help
-+ Hardware driver for the Atheros wisoc Watchdog Timer.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -105,6 +105,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
-
- # PARISC Architecture
-
diff --git a/target/linux/atheros/patches-2.6.30/140-redboot_partition_scan.patch b/target/linux/atheros/patches-2.6.30/140-redboot_partition_scan.patch
deleted file mode 100644
index 289d4eb990..0000000000
--- a/target/linux/atheros/patches-2.6.30/140-redboot_partition_scan.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
- }
- } else {
- offset = directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- offset += master->erasesize;
- if (offset == master->size)
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
--
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-
-@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
diff --git a/target/linux/atheros/patches-2.6.30/141-redboot_various_erase_size_fix.patch b/target/linux/atheros/patches-2.6.30/141-redboot_various_erase_size_fix.patch
deleted file mode 100644
index b9cb0b4bcd..0000000000
--- a/target/linux/atheros/patches-2.6.30/141-redboot_various_erase_size_fix.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -39,6 +39,22 @@ static inline int redboot_checksum(struc
- return 1;
- }
-
-+static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset)
-+{
-+ struct mtd_erase_region_info *regions = mtd->eraseregions;
-+ int i;
-+
-+ for (i = 0; i < mtd->numeraseregions; i++) {
-+ if (regions[i].offset +
-+ regions[i].numblocks * regions[i].erasesize <= offset)
-+ continue;
-+
-+ return regions[i].erasesize;
-+ }
-+
-+ return mtd->erasesize;
-+}
-+
- static int parse_redboot_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long fis_origin)
-@@ -55,6 +71,7 @@ static int parse_redboot_partitions(stru
- int namelen = 0;
- int nulllen = 0;
- int numslots;
-+ int first_slot;
- unsigned long offset;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- static char nullstring[] = "unallocated";
-@@ -168,7 +185,10 @@ static int parse_redboot_partitions(stru
- goto out;
- }
-
-- for (i = 0; i < numslots; i++) {
-+ first_slot = (buf[i].flash_base & (master->erasesize - 1)) /
-+ sizeof(struct fis_image_desc);
-+
-+ for (i = first_slot; i < first_slot + numslots; i++) {
- struct fis_list *new_fl, **prev;
-
- if (buf[i].name[0] == 0xff) {
-@@ -244,12 +264,13 @@ static int parse_redboot_partitions(stru
- }
- #endif
- for ( ; i<nrparts; i++) {
-- if(max_offset < buf[i].flash_base + buf[i].size)
-- max_offset = buf[i].flash_base + buf[i].size;
- parts[i].size = fl->img->size;
- parts[i].offset = fl->img->flash_base;
- parts[i].name = names;
-
-+ if (max_offset < parts[i].offset + parts[i].size)
-+ max_offset = parts[i].offset + parts[i].size;
-+
- strcpy(names, fl->img->name);
- #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY
- if (!memcmp(names, "RedBoot", 8) ||
-@@ -279,7 +300,9 @@ static int parse_redboot_partitions(stru
- fl = fl->next;
- kfree(tmp_fl);
- }
-- if(master->size - max_offset >= master->erasesize)
-+
-+ if (master->size - max_offset >=
-+ mtd_get_offset_erasesize(master, max_offset))
- {
- parts[nrparts].size = master->size - max_offset;
- parts[nrparts].offset = max_offset;
diff --git a/target/linux/atheros/patches-2.6.30/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.30/200-ar2313_enable_mvswitch.patch
deleted file mode 100644
index b97a62d81c..0000000000
--- a/target/linux/atheros/patches-2.6.30/200-ar2313_enable_mvswitch.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/drivers/net/ar231x.c
-+++ b/drivers/net/ar231x.c
-@@ -735,6 +735,7 @@ static void ar231x_load_rx_ring(struct n
- for (i = 0; i < nr_bufs; i++) {
- struct sk_buff *skb;
- ar231x_descr_t *rd;
-+ int offset = RX_OFFSET;
-
- if (sp->rx_skb[idx])
- break;
-@@ -750,7 +751,9 @@ static void ar231x_load_rx_ring(struct n
- * Make sure IP header starts on a fresh cache line.
- */
- skb->dev = dev;
-- skb_reserve(skb, RX_OFFSET);
-+ if (sp->phy_dev)
-+ offset += sp->phy_dev->pkt_align;
-+ skb_reserve(skb, offset);
- sp->rx_skb[idx] = skb;
-
- rd = (ar231x_descr_t *) & sp->rx_ring[idx];
-@@ -824,20 +827,23 @@ static int ar231x_rx_int(struct net_devi
- /* alloc new buffer. */
- skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
- if (skb_new != NULL) {
-+ int offset;
-
- skb = sp->rx_skb[idx];
- /* set skb */
- skb_put(skb,
- ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
--
- dev->stats.rx_bytes += skb->len;
-- skb->protocol = eth_type_trans(skb, dev);
-- /* pass the packet to upper layers */
-- netif_rx(skb);
-
-+ /* pass the packet to upper layers */
-+ sp->rx(skb);
- skb_new->dev = dev;
-+
- /* 16 bit align */
-- skb_reserve(skb_new, RX_OFFSET);
-+ offset = RX_OFFSET;
-+ if (sp->phy_dev)
-+ offset += sp->phy_dev->pkt_align;
-+ skb_reserve(skb_new, offset);
- /* reset descriptor's curr_addr */
- rxdesc->addr = virt_to_phys(skb_new->data);
-
-@@ -1239,6 +1245,8 @@ static int ar231x_mdiobus_probe (struct
- return PTR_ERR(phydev);
- }
-
-+ sp->rx = phydev->netif_rx;
-+
- /* mask with MAC supported features */
- phydev->supported &= (SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
---- a/drivers/net/ar231x.h
-+++ b/drivers/net/ar231x.h
-@@ -221,6 +221,8 @@ typedef struct {
- */
- struct ar231x_private {
- struct net_device *dev;
-+ int (*rx)(struct sk_buff *skb);
-+
- int version;
- u32 mb[2];
-
diff --git a/target/linux/atheros/patches-2.6.30/210-reset_button.patch b/target/linux/atheros/patches-2.6.30/210-reset_button.patch
deleted file mode 100644
index 3c91818146..0000000000
--- a/target/linux/atheros/patches-2.6.30/210-reset_button.patch
+++ /dev/null
@@ -1,174 +0,0 @@
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -8,7 +8,7 @@
- # Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
- #
-
--obj-y += board.o prom.o devices.o
-+obj-y += board.o prom.o devices.o reset.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
---- /dev/null
-+++ b/arch/mips/ar231x/reset.c
-@@ -0,0 +1,160 @@
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/kobject.h>
-+#include <linux/workqueue.h>
-+#include <linux/skbuff.h>
-+#include <linux/netlink.h>
-+#include <net/sock.h>
-+#include <asm/uaccess.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include <gpio.h>
-+#include "devices.h"
-+
-+#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(ar231x_board.config->resetConfigGpio))
-+
-+struct event_t {
-+ struct work_struct wq;
-+ int set;
-+ unsigned long jiffies;
-+};
-+
-+static struct timer_list rst_button_timer;
-+static unsigned long seen;
-+
-+extern struct sock *uevent_sock;
-+extern u64 uevent_next_seqnum(void);
-+
-+static int no_release_workaround = 1;
-+module_param(no_release_workaround, int, 0);
-+
-+static inline void
-+add_msg(struct sk_buff *skb, char *msg)
-+{
-+ char *scratch;
-+ scratch = skb_put(skb, strlen(msg) + 1);
-+ sprintf(scratch, msg);
-+}
-+
-+static void
-+hotplug_button(struct work_struct *wq)
-+{
-+ struct sk_buff *skb;
-+ struct event_t *event;
-+ size_t len;
-+ char *scratch, *s;
-+ char buf[128];
-+
-+ event = container_of(wq, struct event_t, wq);
-+ if (!uevent_sock)
-+ goto done;
-+
-+ /* allocate message with the maximum possible size */
-+ s = event->set ? "pressed" : "released";
-+ len = strlen(s) + 2;
-+ skb = alloc_skb(NLMSG_GOODSIZE, GFP_KERNEL);
-+ if (!skb)
-+ goto done;
-+
-+ /* add header */
-+ scratch = skb_put(skb, len);
-+ sprintf(scratch, "%s@",s);
-+
-+ /* copy keys to our continuous event payload buffer */
-+ add_msg(skb, "HOME=/");
-+ add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin");
-+ add_msg(skb, "SUBSYSTEM=button");
-+ add_msg(skb, "BUTTON=reset");
-+ add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released"));
-+ sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ);
-+ add_msg(skb, buf);
-+ snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
-+ add_msg(skb, buf);
-+
-+ NETLINK_CB(skb).dst_group = 1;
-+ netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
-+
-+done:
-+ kfree(event);
-+}
-+
-+static void
-+reset_button_poll(unsigned long unused)
-+{
-+ struct event_t *event;
-+ int gpio = ~0;
-+
-+ if(!no_release_workaround)
-+ return;
-+
-+ gpio = ar231x_gpiodev->get();
-+ gpio &= (1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE));
-+ if(gpio) {
-+ rst_button_timer.expires = jiffies + (HZ / 4);
-+ add_timer(&rst_button_timer);
-+ return;
-+ }
-+
-+ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
-+ if (!event)
-+ return;
-+
-+ event->set = 0;
-+ event->jiffies = jiffies;
-+ INIT_WORK(&event->wq, hotplug_button);
-+ schedule_work(&event->wq);
-+}
-+
-+static irqreturn_t
-+button_handler(int irq, void *dev_id)
-+{
-+ static int pressed = 0;
-+ struct event_t *event;
-+ u32 gpio = ~0;
-+
-+ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
-+ if (!event)
-+ return IRQ_NONE;
-+
-+ pressed = !pressed;
-+
-+ gpio = ar231x_gpiodev->get() & (1 << (irq - AR531X_GPIO_IRQ_BASE));
-+
-+ event->set = gpio;
-+ if(!event->set)
-+ no_release_workaround = 0;
-+
-+ event->jiffies = jiffies;
-+
-+ INIT_WORK(&event->wq, hotplug_button);
-+ schedule_work(&event->wq);
-+
-+ seen = jiffies;
-+ if(event->set && no_release_workaround)
-+ mod_timer(&rst_button_timer, jiffies + (HZ / 4));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int __init
-+ar231x_init_reset(void)
-+{
-+ seen = jiffies;
-+
-+ if (ar231x_board.config->resetConfigGpio == 0xffff)
-+ return -ENODEV;
-+
-+ init_timer(&rst_button_timer);
-+ rst_button_timer.function = reset_button_poll;
-+ rst_button_timer.expires = jiffies + HZ / 50;
-+ add_timer(&rst_button_timer);
-+
-+ request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar231x_reset", NULL);
-+
-+ return 0;
-+}
-+
-+module_init(ar231x_init_reset);
diff --git a/target/linux/atheros/patches-2.6.30/220-enet_micrel_workaround.patch b/target/linux/atheros/patches-2.6.30/220-enet_micrel_workaround.patch
deleted file mode 100644
index 989bd76068..0000000000
--- a/target/linux/atheros/patches-2.6.30/220-enet_micrel_workaround.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/drivers/net/ar231x.c
-+++ b/drivers/net/ar231x.c
-@@ -148,6 +148,7 @@ static int ar231x_mdiobus_write(struct m
- static int ar231x_mdiobus_reset(struct mii_bus *bus);
- static int ar231x_mdiobus_probe (struct net_device *dev);
- static void ar231x_adjust_link(struct net_device *dev);
-+static bool no_phy = false;
-
- #ifndef ERR
- #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-@@ -278,6 +279,21 @@ int __init ar231x_probe(struct platform_
-
- mdiobus_register(sp->mii_bus);
-
-+ /* Workaround for Micrel switch, which is only available on
-+ * one PHY and cannot be configured through MDIO */
-+ if (!no_phy) {
-+ u32 phy_id = 0;
-+ get_phy_id(sp->mii_bus, 1, &phy_id);
-+ if (phy_id == 0x00221450)
-+ no_phy = true;
-+ }
-+ if (no_phy) {
-+ sp->link = 1;
-+ netif_carrier_on(dev);
-+ return 0;
-+ }
-+ no_phy = true;
-+
- if (ar231x_mdiobus_probe(dev) != 0) {
- printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
- rx_tasklet_cleanup(dev);
-@@ -334,8 +350,10 @@ static int __devexit ar231x_remove(struc
- rx_tasklet_cleanup(dev);
- ar231x_init_cleanup(dev);
- unregister_netdev(dev);
-- mdiobus_unregister(sp->mii_bus);
-- mdiobus_free(sp->mii_bus);
-+ if (sp->mii_bus) {
-+ mdiobus_unregister(sp->mii_bus);
-+ mdiobus_free(sp->mii_bus);
-+ }
- kfree(dev);
- return 0;
- }
-@@ -836,7 +854,12 @@ static int ar231x_rx_int(struct net_devi
- dev->stats.rx_bytes += skb->len;
-
- /* pass the packet to upper layers */
-- sp->rx(skb);
-+ if (sp->rx) {
-+ sp->rx(skb);
-+ } else {
-+ skb->protocol = eth_type_trans(skb, skb->dev);
-+ netif_rx(skb);
-+ }
- skb_new->dev = dev;
-
- /* 16 bit align */
-@@ -1123,6 +1146,9 @@ static int ar231x_ioctl(struct net_devic
- struct ar231x_private *sp = netdev_priv(dev);
- int ret;
-
-+ if (!sp->phy_dev)
-+ return -ENODEV;
-+
- switch (cmd) {
-
- case SIOCETHTOOL:
diff --git a/target/linux/atheros/patches-2.6.32/001-get_c0_compare_int_fix.patch b/target/linux/atheros/patches-2.6.32/001-get_c0_compare_int_fix.patch
deleted file mode 100644
index 43da96c3fe..0000000000
--- a/target/linux/atheros/patches-2.6.32/001-get_c0_compare_int_fix.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Fix the usage of get_c0_compare_int: override cp0_compare_irq if the returned
-value is in the MIPS CPU IRQ range to ensure that c0_compare_int_usable()
-still works.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -168,20 +168,23 @@ int __cpuinit r4k_clockevent_init(void)
- struct clock_event_device *cd;
- unsigned int irq;
-
-- if (!cpu_has_counter || !mips_hpt_frequency)
-- return -ENXIO;
--
-- if (!c0_compare_int_usable())
-- return -ENXIO;
--
- /*
- * With vectored interrupts things are getting platform specific.
- * get_c0_compare_int is a hook to allow a platform to return the
- * interrupt number of it's liking.
- */
- irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
-- if (get_c0_compare_int)
-+ if (get_c0_compare_int) {
- irq = get_c0_compare_int();
-+ if ((irq >= MIPS_CPU_IRQ_BASE) && (irq < MIPS_CPU_IRQ_BASE + 8))
-+ cp0_compare_irq = irq - MIPS_CPU_IRQ_BASE;
-+ }
-+
-+ if (!cpu_has_counter || !mips_hpt_frequency)
-+ return -ENXIO;
-+
-+ if (!c0_compare_int_usable())
-+ return -ENXIO;
-
- cd = &per_cpu(mips_clockevent_device, cpu);
-
diff --git a/target/linux/atheros/patches-2.6.32/100-board.patch b/target/linux/atheros/patches-2.6.32/100-board.patch
deleted file mode 100644
index c798975953..0000000000
--- a/target/linux/atheros/patches-2.6.32/100-board.patch
+++ /dev/null
@@ -1,3126 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -96,6 +96,19 @@ config BCM63XX
- help
- Support for BCM63XX based boards
-
-+config ATHEROS_AR231X
-+ bool "Atheros 231x/531x SoC support"
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select GENERIC_GPIO
-+ help
-+ Support for AR231x and AR531x based boards
-+
- config MIPS_COBALT
- bool "Cobalt Server"
- select CEVT_R4K
-@@ -673,6 +686,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
-
- endchoice
-
-+source "arch/mips/ar231x/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -298,6 +298,13 @@ cflags-$(CONFIG_SOC_AU1X00) += -I$(srctr
-
-
- #
-+# Atheros AR5312/AR2312 WiSoC
-+#
-+core-$(CONFIG_ATHEROS_AR231X) += arch/mips/ar231x/
-+cflags-$(CONFIG_ATHEROS_AR231X) += -I$(srctree)/arch/mips/include/asm/mach-ar231x
-+load-$(CONFIG_ATHEROS_AR231X) += 0xffffffff80041000
-+
-+#
- # Cobalt Server
- #
- core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
---- /dev/null
-+++ b/arch/mips/ar231x/Kconfig
-@@ -0,0 +1,17 @@
-+config ATHEROS_AR5312
-+ bool "Atheros 5312/2312+ support"
-+ depends on ATHEROS_AR231X
-+ default y
-+
-+config ATHEROS_AR2315
-+ bool "Atheros 2315+ support"
-+ depends on ATHEROS_AR231X
-+ select DMA_NONCOHERENT
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select GENERIC_GPIO
-+ default y
---- /dev/null
-+++ b/arch/mips/ar231x/Makefile
-@@ -0,0 +1,13 @@
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License. See the file "COPYING" in the main directory of this archive
-+# for more details.
-+#
-+# Copyright (C) 2006 FON Technology, SL.
-+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+#
-+
-+obj-y += board.o prom.o devices.o
-+obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
-+obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
---- /dev/null
-+++ b/arch/mips/ar231x/board.c
-@@ -0,0 +1,251 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/random.h>
-+#include <linux/etherdevice.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/reboot.h>
-+#include <asm/io.h>
-+
-+#include <ar231x_platform.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+void (*ar231x_irq_dispatch)(void);
-+
-+static inline bool
-+check_radio_magic(u8 *addr)
-+{
-+ addr += 0x7a; /* offset for flash magic */
-+ if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static inline bool
-+check_board_data(u8 *flash_limit, u8 *addr, bool broken)
-+{
-+ /* config magic found */
-+ if (*((u32 *)addr) == AR531X_BD_MAGIC)
-+ return 1;
-+
-+ if (!broken)
-+ return 0;
-+
-+ if (check_radio_magic(addr + 0xf8))
-+ ar231x_board.radio = addr + 0xf8;
-+ if ((addr < flash_limit + 0x10000) &&
-+ check_radio_magic(addr + 0x10000))
-+ ar231x_board.radio = addr + 0x10000;
-+
-+ if (ar231x_board.radio) {
-+ /* broken board data detected, use radio data to find the offset,
-+ * user will fix this */
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static u8 *
-+find_board_config(u8 *flash_limit, bool broken)
-+{
-+ u8 *addr;
-+ int found = 0;
-+
-+ for (addr = flash_limit - 0x1000;
-+ addr >= flash_limit - 0x30000;
-+ addr -= 0x1000) {
-+
-+ if (check_board_data(flash_limit, addr, broken)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ if (!found)
-+ addr = NULL;
-+
-+ return addr;
-+}
-+
-+static u8 *
-+find_radio_config(u8 *flash_limit, u8 *board_config)
-+{
-+ int found;
-+ u8 *radio_config;
-+
-+ /*
-+ * Now find the start of Radio Configuration data, using heuristics:
-+ * Search forward from Board Configuration data by 0x1000 bytes
-+ * at a time until we find non-0xffffffff.
-+ */
-+ found = 0;
-+ for (radio_config = board_config + 0x1000;
-+ (radio_config < flash_limit);
-+ radio_config += 0x1000) {
-+ if ((*(u32 *)radio_config != 0xffffffff) &&
-+ check_radio_magic(radio_config)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ /* AR2316 relocates radio config to new location */
-+ if (!found) {
-+ for (radio_config = board_config + 0xf8;
-+ (radio_config < flash_limit - 0x1000 + 0xf8);
-+ radio_config += 0x1000) {
-+ if ((*(u32 *)radio_config != 0xffffffff) &&
-+ check_radio_magic(radio_config)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (!found) {
-+ printk("Could not find Radio Configuration data\n");
-+ radio_config = 0;
-+ }
-+
-+ return (u8 *) radio_config;
-+}
-+
-+int __init
-+ar231x_find_config(u8 *flash_limit)
-+{
-+ struct ar231x_boarddata *config;
-+ unsigned int rcfg_size;
-+ int broken_boarddata = 0;
-+ u8 *bcfg, *rcfg;
-+ u8 *board_data;
-+ u8 *radio_data;
-+ u32 offset;
-+
-+ ar231x_board.config = NULL;
-+ ar231x_board.radio = NULL;
-+ /* Copy the board and radio data to RAM, because accessing the mapped
-+ * memory of the flash directly after booting is not safe */
-+
-+ /* Try to find valid board and radio data */
-+ bcfg = find_board_config(flash_limit, false);
-+
-+ /* If that fails, try to at least find valid radio data */
-+ if (!bcfg) {
-+ bcfg = find_board_config(flash_limit, true);
-+ broken_boarddata = 1;
-+ }
-+
-+ if (!bcfg) {
-+ printk(KERN_WARNING "WARNING: No board configuration data found!\n");
-+ return -ENODEV;
-+ }
-+
-+ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
-+ ar231x_board.config = (struct ar231x_boarddata *) board_data;
-+ memcpy(board_data, bcfg, 0x100);
-+ if (broken_boarddata) {
-+ printk(KERN_WARNING "WARNING: broken board data detected\n");
-+ config = ar231x_board.config;
-+ if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
-+ printk(KERN_INFO "Fixing up empty mac addresses\n");
-+ config->resetConfigGpio = 0xffff;
-+ config->sysLedGpio = 0xffff;
-+ random_ether_addr(config->wlan0_mac);
-+ config->wlan0_mac[0] &= ~0x06;
-+ random_ether_addr(config->enet0_mac);
-+ random_ether_addr(config->enet1_mac);
-+ }
-+ }
-+
-+
-+ /* Radio config starts 0x100 bytes after board config, regardless
-+ * of what the physical layout on the flash chip looks like */
-+
-+ if (ar231x_board.radio)
-+ rcfg = (u8 *) ar231x_board.radio;
-+ else
-+ rcfg = find_radio_config(flash_limit, bcfg);
-+
-+ if (!rcfg)
-+ return -ENODEV;
-+
-+ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
-+ ar231x_board.radio = radio_data;
-+ offset = radio_data - board_data;
-+ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset);
-+ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
-+ memcpy(radio_data, rcfg, rcfg_size);
-+
-+ return 0;
-+}
-+
-+static void
-+ar231x_halt(void)
-+{
-+ local_irq_disable();
-+ while (1);
-+}
-+
-+void __init
-+plat_mem_setup(void)
-+{
-+ _machine_halt = ar231x_halt;
-+ pm_power_off = ar231x_halt;
-+
-+ ar5312_plat_setup();
-+ ar2315_plat_setup();
-+
-+ /* Disable data watchpoints */
-+ write_c0_watchlo0(0);
-+}
-+
-+
-+asmlinkage void
-+plat_irq_dispatch(void)
-+{
-+ ar231x_irq_dispatch();
-+}
-+
-+void __init
-+plat_time_init(void)
-+{
-+ ar5312_time_init();
-+ ar2315_time_init();
-+}
-+
-+unsigned int __cpuinit
-+get_c0_compare_int(void)
-+{
-+ return CP0_LEGACY_COMPARE_IRQ;
-+}
-+
-+void __init
-+arch_init_irq(void)
-+{
-+ clear_c0_status(ST0_IM);
-+ mips_cpu_irq_init();
-+
-+ /* Initialize interrupt controllers */
-+ ar5312_irq_init();
-+ ar2315_irq_init();
-+}
-+
-+
---- /dev/null
-+++ b/arch/mips/ar231x/prom.c
-@@ -0,0 +1,37 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright MontaVista Software Inc
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Prom setup file for ar531x
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/autoconf.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/bootinfo.h>
-+#include <asm/addrspace.h>
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+void __init prom_init(void)
-+{
-+ ar5312_prom_init();
-+ ar2315_prom_init();
-+}
-+
-+void __init prom_free_prom_memory(void)
-+{
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
-@@ -0,0 +1,83 @@
-+#ifndef __AR531X_PLATFORM_H
-+#define __AR531X_PLATFORM_H
-+
-+/*
-+ * This is board-specific data that is stored in a "fixed" location in flash.
-+ * It is shared across operating systems, so it should not be changed lightly.
-+ * The main reason we need it is in order to extract the ethernet MAC
-+ * address(es).
-+ */
-+struct ar231x_boarddata {
-+ u32 magic; /* board data is valid */
-+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
-+ u16 cksum; /* checksum (starting with BD_REV 2) */
-+ u16 rev; /* revision of this struct */
-+#define BD_REV 4
-+ char boardName[64]; /* Name of board */
-+ u16 major; /* Board major number */
-+ u16 minor; /* Board minor number */
-+ u32 flags; /* Board configuration */
-+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
-+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
-+#define BD_UART1 0x00000004 /* UART1 is stuffed */
-+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
-+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
-+#define BD_SYSLED 0x00000020 /* System LED stuffed */
-+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
-+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
-+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
-+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
-+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
-+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
-+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
-+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
-+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
-+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
-+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
-+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
-+ u16 resetConfigGpio; /* Reset factory GPIO pin */
-+ u16 sysLedGpio; /* System LED GPIO pin */
-+
-+ u32 cpuFreq; /* CPU core frequency in Hz */
-+ u32 sysFreq; /* System frequency in Hz */
-+ u32 cntFreq; /* Calculated C0_COUNT frequency */
-+
-+ u8 wlan0_mac[6];
-+ u8 enet0_mac[6];
-+ u8 enet1_mac[6];
-+
-+ u16 pciId; /* Pseudo PCIID for common code */
-+ u16 memCap; /* cap bank1 in MB */
-+
-+ /* version 3 */
-+ u8 wlan1_mac[6]; /* (ar5212) */
-+};
-+
-+#define BOARD_CONFIG_BUFSZ 0x1000
-+
-+/*
-+ * Platform device information for the Wireless MAC
-+ */
-+struct ar231x_board_config {
-+ u16 devid;
-+
-+ /* board config data */
-+ struct ar231x_boarddata *config;
-+
-+ /* radio calibration data */
-+ const char *radio;
-+};
-+
-+/*
-+ * Platform device information for the Ethernet MAC
-+ */
-+struct ar231x_eth {
-+ u32 reset_base;
-+ u32 reset_mac;
-+ u32 reset_phy;
-+ u32 phy_base;
-+ struct ar231x_board_config *config;
-+ char *macaddr;
-+};
-+
-+#endif /* __AR531X_PLATFORM_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
-@@ -0,0 +1,84 @@
-+/*
-+ * Atheros SoC specific CPU feature overrides
-+ *
-+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was derived from: include/asm-mips/cpu-features.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ * Copyright (C) 2004 Maciej W. Rozycki
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
-+
-+/*
-+ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
-+ */
-+#define cpu_has_tlb 1
-+#define cpu_has_4kex 1
-+#define cpu_has_3k_cache 0
-+#define cpu_has_4k_cache 1
-+#define cpu_has_tx39_cache 0
-+#define cpu_has_sb1_cache 0
-+#define cpu_has_fpu 0
-+#define cpu_has_32fpr 0
-+#define cpu_has_counter 1
-+/* #define cpu_has_watch ? */
-+/* #define cpu_has_divec ? */
-+/* #define cpu_has_vce ? */
-+/* #define cpu_has_cache_cdex_p ? */
-+/* #define cpu_has_cache_cdex_s ? */
-+/* #define cpu_has_prefetch ? */
-+/* #define cpu_has_mcheck ? */
-+#define cpu_has_ejtag 1
-+
-+#if !defined(CONFIG_ATHEROS_AR5312)
-+# define cpu_has_llsc 1
-+#else
-+/*
-+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
-+ * ll/sc instructions.
-+ */
-+# define cpu_has_llsc 0
-+#endif
-+
-+#define cpu_has_mips16 0
-+#define cpu_has_mdmx 0
-+#define cpu_has_mips3d 0
-+#define cpu_has_smartmips 0
-+
-+/* #define cpu_has_vtag_icache ? */
-+/* #define cpu_has_dc_aliases ? */
-+/* #define cpu_has_ic_fills_f_dc ? */
-+/* #define cpu_has_pindexed_dcache ? */
-+
-+/* #define cpu_icache_snoops_remote_store ? */
-+
-+#define cpu_has_mips32r1 1
-+
-+#if !defined(CONFIG_ATHEROS_AR5312)
-+# define cpu_has_mips32r2 1
-+#endif
-+
-+#define cpu_has_mips64r1 0
-+#define cpu_has_mips64r2 0
-+
-+#define cpu_has_dsp 0
-+#define cpu_has_mipsmt 0
-+
-+/* #define cpu_has_nofpuex ? */
-+#define cpu_has_64bits 0
-+#define cpu_has_64bit_zero_reg 0
-+#define cpu_has_64bit_gp_regs 0
-+#define cpu_has_64bit_addresses 0
-+
-+/* #define cpu_has_inclusive_pcaches ? */
-+
-+/* #define cpu_dcache_line_size() ? */
-+/* #define cpu_icache_line_size() ? */
-+
-+#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h
-@@ -0,0 +1,64 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
-+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ */
-+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
-+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
-+
-+#define PCI_DMA_OFFSET 0x20000000
-+
-+struct device;
-+
-+static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-+{
-+ return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
-+}
-+
-+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
-+{
-+ return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
-+}
-+
-+static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-+ dma_addr_t dma_addr)
-+{
-+ return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
-+}
-+
-+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-+ size_t size, enum dma_data_direction direction)
-+{
-+}
-+
-+static inline int plat_dma_supported(struct device *dev, u64 mask)
-+{
-+ return 1;
-+}
-+
-+static inline void plat_extra_sync_for_device(struct device *dev)
-+{
-+ return;
-+}
-+
-+static inline int plat_dma_mapping_error(struct device *dev,
-+ dma_addr_t dma_addr)
-+{
-+ return 0;
-+}
-+
-+static inline int plat_device_is_coherent(struct device *dev)
-+{
-+#ifdef CONFIG_DMA_COHERENT
-+ return 1;
-+#endif
-+#ifdef CONFIG_DMA_NONCOHERENT
-+ return 0;
-+#endif
-+}
-+
-+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/gpio.h
-@@ -0,0 +1,79 @@
-+#ifndef _ATHEROS_GPIO_H_
-+#define _ATHEROS_GPIO_H_
-+
-+#include <ar231x.h>
-+
-+struct ar231x_gpiodev {
-+ u32 valid_mask;
-+ u32 (*get_output)(void);
-+ u32 (*set_output)(u32 mask, u32 val);
-+ u32 (*get)(void);
-+ u32 (*set)(u32 mask, u32 val);
-+};
-+
-+extern const struct ar231x_gpiodev *ar231x_gpiodev;
-+
-+/*
-+ * Wrappers for the generic GPIO layer
-+ */
-+
-+static inline int gpio_direction_input(unsigned gpio) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return -ENXIO;
-+
-+ ar231x_gpiodev->set_output(mask, 0);
-+ return 0;
-+}
-+
-+static inline void gpio_set_value(unsigned gpio, int value) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return;
-+
-+ ar231x_gpiodev->set(mask, (!!value) * mask);
-+}
-+
-+static inline int gpio_direction_output(unsigned gpio, int value) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return -ENXIO;
-+
-+ ar231x_gpiodev->set_output(mask, mask);
-+ ar231x_gpiodev->set(mask, (!!value) * mask);
-+ return 0;
-+}
-+
-+/* Reads the gpio pin. Unchecked function */
-+static inline int gpio_get_value(unsigned gpio) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return 0;
-+
-+ return !!(ar231x_gpiodev->get() & mask);
-+}
-+
-+static inline int gpio_request(unsigned gpio, const char *label) {
-+ return 0;
-+}
-+
-+static inline void gpio_free(unsigned gpio) {
-+}
-+
-+/* Returns IRQ to attach for gpio. Unchecked function */
-+static inline int gpio_to_irq(unsigned gpio) {
-+ return AR531X_GPIO_IRQ(gpio);
-+}
-+
-+/* Returns gpio for IRQ attached. Unchecked function */
-+static inline int irq_to_gpio(unsigned irq) {
-+ return (irq - (AR531X_GPIO_IRQ(0)));
-+}
-+
-+#include <asm-generic/gpio.h> /* cansleep wrappers */
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/reset.h
-@@ -0,0 +1,6 @@
-+#ifndef __AR531X_RESET_H
-+#define __AR531X_RESET_H
-+
-+void ar531x_disable_reset_button(void);
-+
-+#endif /* __AR531X_RESET_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/war.h
-@@ -0,0 +1,25 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
-+ */
-+#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
-+#define __ASM_MIPS_MACH_ATHEROS_WAR_H
-+
-+#define R4600_V1_INDEX_ICACHEOP_WAR 0
-+#define R4600_V1_HIT_CACHEOP_WAR 0
-+#define R4600_V2_HIT_CACHEOP_WAR 0
-+#define R5432_CP0_INTERRUPT_WAR 0
-+#define BCM1250_M3_WAR 0
-+#define SIBYTE_1956_WAR 0
-+#define MIPS4K_ICACHE_REFILL_WAR 0
-+#define MIPS_CACHE_SYNC_WAR 0
-+#define TX49XX_ICACHE_INDEX_INV_WAR 0
-+#define RM9000_CDEX_SMP_WAR 0
-+#define ICACHE_REFILLS_WORKAROUND_WAR 0
-+#define R10000_LLSC_WAR 0
-+#define MIPS34K_MISSED_ITLB_WAR 0
-+
-+#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
-@@ -0,0 +1,580 @@
-+/*
-+ * Register definitions for AR2315+
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef __AR2315_REG_H
-+#define __AR2315_REG_H
-+
-+/*
-+ * IRQs
-+ */
-+#define AR2315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR2315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR2315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR2315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-+#define AR2315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+
-+/*
-+ * Address map
-+ */
-+#define AR2315_SPI_READ 0x08000000 /* SPI FLASH */
-+#define AR2315_WLAN0 0xB0000000 /* Wireless MMR */
-+#define AR2315_PCI 0xB0100000 /* PCI MMR */
-+#define AR2315_SDRAMCTL 0xB0300000 /* SDRAM MMR */
-+#define AR2315_LOCAL 0xB0400000 /* LOCAL BUS MMR */
-+#define AR2315_ENET0 0xB0500000 /* ETHERNET MMR */
-+#define AR2315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */
-+#define AR2315_UART0 0xB1100003 /* UART MMR */
-+#define AR2315_SPI 0xB1300000 /* SPI FLASH MMR */
-+#define AR2315_PCIEXT 0x80000000 /* pci external */
-+
-+/*
-+ * Reset Register
-+ */
-+#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000)
-+
-+#define AR2315_RESET_COLD_AHB 0x00000001
-+#define AR2315_RESET_COLD_APB 0x00000002
-+#define AR2315_RESET_COLD_CPU 0x00000004
-+#define AR2315_RESET_COLD_CPUWARM 0x00000008
-+#define AR2315_RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
-+#define AR2317_RESET_SYSTEM 0x00000010
-+
-+
-+#define AR2315_RESET (AR2315_DSLBASE + 0x0004)
-+
-+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
-+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
-+#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
-+#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
-+#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */
-+#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */
-+#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
-+#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI interface */
-+#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */
-+#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
-+#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
-+#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
-+
-+/*
-+ * AHB master arbitration control
-+ */
-+#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008)
-+
-+#define AR2315_ARB_CPU 0x00000001 /* CPU, default */
-+#define AR2315_ARB_WLAN 0x00000002 /* WLAN */
-+#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
-+#define AR2315_ARB_LOCAL 0x00000008 /* LOCAL */
-+#define AR2315_ARB_PCI 0x00000010 /* PCI */
-+#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */
-+#define AR2315_ARB_RETRY 0x00000100 /* retry policy, debug only */
-+
-+/*
-+ * Config Register
-+ */
-+#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c)
-+
-+#define AR2315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
-+#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
-+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
-+#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */
-+#define AR2315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
-+#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
-+#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
-+
-+#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
-+#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */
-+#define AR2315_CONFIG_PCIAHB 0x00000800
-+#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
-+#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */
-+#define AR2315_CONFIG_CPU_DRAM 0x00010000
-+#define AR2315_CONFIG_CPU_PCI 0x00020000
-+#define AR2315_CONFIG_CPU_MMR 0x00040000
-+#define AR2315_CONFIG_BIG 0x00000400
-+
-+
-+/*
-+ * NMI control
-+ */
-+#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010)
-+
-+#define AR2315_NMI_EN 1
-+
-+/*
-+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
-+ */
-+#define AR2315_SREV (AR2315_DSLBASE + 0x0014)
-+
-+#define AR2315_REV_MAJ 0x00f0
-+#define AR2315_REV_MAJ_S 4
-+#define AR2315_REV_MIN 0x000f
-+#define AR2315_REV_MIN_S 0
-+#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN)
-+
-+/*
-+ * Interface Enable
-+ */
-+#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018)
-+
-+#define AR2315_IF_MASK 0x00000007
-+#define AR2315_IF_DISABLED 0
-+#define AR2315_IF_PCI 1
-+#define AR2315_IF_TS_LOCAL 2
-+#define AR2315_IF_ALL 3 /* only for emulation with separate pins */
-+#define AR2315_IF_LOCAL_HOST 0x00000008
-+#define AR2315_IF_PCI_HOST 0x00000010
-+#define AR2315_IF_PCI_INTR 0x00000020
-+#define AR2315_IF_PCI_CLK_MASK 0x00030000
-+#define AR2315_IF_PCI_CLK_INPUT 0
-+#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
-+#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
-+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
-+#define AR2315_IF_PCI_CLK_SHIFT 16
-+
-+/*
-+ * APB Interrupt control
-+ */
-+
-+#define AR2315_ISR (AR2315_DSLBASE + 0x0020)
-+#define AR2315_IMR (AR2315_DSLBASE + 0x0024)
-+#define AR2315_GISR (AR2315_DSLBASE + 0x0028)
-+
-+#define AR2315_ISR_UART0 0x0001 /* high speed UART */
-+#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */
-+#define AR2315_ISR_SPI 0x0004 /* SPI bus */
-+#define AR2315_ISR_AHB 0x0008 /* AHB error */
-+#define AR2315_ISR_APB 0x0010 /* APB error */
-+#define AR2315_ISR_TIMER 0x0020 /* timer */
-+#define AR2315_ISR_GPIO 0x0040 /* GPIO */
-+#define AR2315_ISR_WD 0x0080 /* watchdog */
-+#define AR2315_ISR_IR_RSVD 0x0100 /* IR */
-+
-+#define AR2315_GISR_MISC 0x0001
-+#define AR2315_GISR_WLAN0 0x0002
-+#define AR2315_GISR_MPEGTS_RSVD 0x0004
-+#define AR2315_GISR_LOCALPCI 0x0008
-+#define AR2315_GISR_WMACPOLL 0x0010
-+#define AR2315_GISR_TIMER 0x0020
-+#define AR2315_GISR_ETHERNET 0x0040
-+
-+/*
-+ * Interrupt routing from IO to the processor IP bits
-+ * Define our inter mask and level
-+ */
-+#define AR2315_INTR_MISCIO SR_IBIT3
-+#define AR2315_INTR_WLAN0 SR_IBIT4
-+#define AR2315_INTR_ENET0 SR_IBIT5
-+#define AR2315_INTR_LOCALPCI SR_IBIT6
-+#define AR2315_INTR_WMACPOLL SR_IBIT7
-+#define AR2315_INTR_COMPARE SR_IBIT8
-+
-+/*
-+ * Timers
-+ */
-+#define AR2315_TIMER (AR2315_DSLBASE + 0x0030)
-+#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034)
-+#define AR2315_WD (AR2315_DSLBASE + 0x0038)
-+#define AR2315_WDC (AR2315_DSLBASE + 0x003c)
-+
-+#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000
-+#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */
-+#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */
-+
-+/*
-+ * CPU Performance Counters
-+ */
-+#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048)
-+#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c)
-+
-+#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */
-+#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */
-+#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */
-+#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */
-+#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */
-+#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
-+#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
-+
-+#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */
-+#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */
-+#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
-+#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
-+#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */
-+#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */
-+#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */
-+
-+/*
-+ * AHB Error Reporting.
-+ */
-+#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */
-+#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */
-+#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */
-+#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */
-+#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */
-+
-+#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
-+ /* write 1 to clear all bits in ERR0 */
-+#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
-+#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
-+
-+#define AR2315_PROCERR_HMAST 0x0000000f
-+#define AR2315_PROCERR_HMAST_DFLT 0
-+#define AR2315_PROCERR_HMAST_WMAC 1
-+#define AR2315_PROCERR_HMAST_ENET 2
-+#define AR2315_PROCERR_HMAST_PCIENDPT 3
-+#define AR2315_PROCERR_HMAST_LOCAL 4
-+#define AR2315_PROCERR_HMAST_CPU 5
-+#define AR2315_PROCERR_HMAST_PCITGT 6
-+
-+#define AR2315_PROCERR_HMAST_S 0
-+#define AR2315_PROCERR_HWRITE 0x00000010
-+#define AR2315_PROCERR_HSIZE 0x00000060
-+#define AR2315_PROCERR_HSIZE_S 5
-+#define AR2315_PROCERR_HTRANS 0x00000180
-+#define AR2315_PROCERR_HTRANS_S 7
-+#define AR2315_PROCERR_HBURST 0x00000e00
-+#define AR2315_PROCERR_HBURST_S 9
-+
-+/*
-+ * Clock Control
-+ */
-+#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064)
-+#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068)
-+#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c)
-+#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070)
-+#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074)
-+#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080)
-+#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084)
-+
-+/* PLLc Control fields */
-+#define PLLC_REF_DIV_M 0x00000003
-+#define PLLC_REF_DIV_S 0
-+#define PLLC_FDBACK_DIV_M 0x0000007C
-+#define PLLC_FDBACK_DIV_S 2
-+#define PLLC_ADD_FDBACK_DIV_M 0x00000080
-+#define PLLC_ADD_FDBACK_DIV_S 7
-+#define PLLC_CLKC_DIV_M 0x0001c000
-+#define PLLC_CLKC_DIV_S 14
-+#define PLLC_CLKM_DIV_M 0x00700000
-+#define PLLC_CLKM_DIV_S 20
-+
-+/* CPU CLK Control fields */
-+#define CPUCLK_CLK_SEL_M 0x00000003
-+#define CPUCLK_CLK_SEL_S 0
-+#define CPUCLK_CLK_DIV_M 0x0000000c
-+#define CPUCLK_CLK_DIV_S 2
-+
-+/* AMBA CLK Control fields */
-+#define AMBACLK_CLK_SEL_M 0x00000003
-+#define AMBACLK_CLK_SEL_S 0
-+#define AMBACLK_CLK_DIV_M 0x0000000c
-+#define AMBACLK_CLK_DIV_S 2
-+
-+/*
-+ * GPIO
-+ */
-+#define AR2315_GPIO_DI (AR2315_DSLBASE + 0x0088)
-+#define AR2315_GPIO_DO (AR2315_DSLBASE + 0x0090)
-+#define AR2315_GPIO_CR (AR2315_DSLBASE + 0x0098)
-+#define AR2315_GPIO_INT (AR2315_DSLBASE + 0x00a0)
-+
-+#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
-+#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */
-+#define AR2315_GPIO_CR_I(x) (0) /* input */
-+
-+#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */
-+#define AR2315_GPIO_INT_M (0x3F) /* mask for int */
-+#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */
-+#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */
-+
-+#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */
-+#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */
-+#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */
-+#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */
-+#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */
-+
-+#define AR2315_RESET_GPIO 5
-+#define AR2315_NUM_GPIO 22
-+
-+/*
-+ * PCI Clock Control
-+ */
-+#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4)
-+
-+#define AR2315_PCICLK_INPUT_M 0x3
-+#define AR2315_PCICLK_INPUT_S 0
-+
-+#define AR2315_PCICLK_PLLC_CLKM 0
-+#define AR2315_PCICLK_PLLC_CLKM1 1
-+#define AR2315_PCICLK_PLLC_CLKC 2
-+#define AR2315_PCICLK_REF_CLK 3
-+
-+#define AR2315_PCICLK_DIV_M 0xc
-+#define AR2315_PCICLK_DIV_S 2
-+
-+#define AR2315_PCICLK_IN_FREQ 0
-+#define AR2315_PCICLK_IN_FREQ_DIV_6 1
-+#define AR2315_PCICLK_IN_FREQ_DIV_8 2
-+#define AR2315_PCICLK_IN_FREQ_DIV_10 3
-+
-+/*
-+ * Observation Control Register
-+ */
-+#define AR2315_OCR (AR2315_DSLBASE + 0x00b0)
-+#define OCR_GPIO0_IRIN 0x0040
-+#define OCR_GPIO1_IROUT 0x0080
-+#define OCR_GPIO3_RXCLR 0x0200
-+
-+/*
-+ * General Clock Control
-+ */
-+
-+#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4)
-+#define MISCCLK_PLLBYPASS_EN 0x00000001
-+#define MISCCLK_PROCREFCLK 0x00000002
-+
-+/*
-+ * SDRAM Controller
-+ * - No read or write buffers are included.
-+ */
-+#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00)
-+#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c)
-+#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10)
-+
-+#define SDRAM_DATA_WIDTH_M 0x00006000
-+#define SDRAM_DATA_WIDTH_S 13
-+
-+#define SDRAM_COL_WIDTH_M 0x00001E00
-+#define SDRAM_COL_WIDTH_S 9
-+
-+#define SDRAM_ROW_WIDTH_M 0x000001E0
-+#define SDRAM_ROW_WIDTH_S 5
-+
-+#define SDRAM_BANKADDR_BITS_M 0x00000018
-+#define SDRAM_BANKADDR_BITS_S 3
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+
-+#define AR2315_SPI_CTL (AR2315_SPI + 0x00)
-+#define AR2315_SPI_OPCODE (AR2315_SPI + 0x04)
-+#define AR2315_SPI_DATA (AR2315_SPI + 0x08)
-+
-+#define SPI_CTL_START 0x00000100
-+#define SPI_CTL_BUSY 0x00010000
-+#define SPI_CTL_TXCNT_MASK 0x0000000f
-+#define SPI_CTL_RXCNT_MASK 0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
-+#define SPI_CTL_SIZE_MASK 0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK 0x03000000
-+#define SPI_OPCODE_MASK 0x000000ff
-+
-+/*
-+ * PCI Bus Interface Registers
-+ */
-+#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008)
-+#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c)
-+#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
-+#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
-+#define AR2315_PCIMISC_RST_MODE 0x00000030
-+#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
-+#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
-+#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
-+#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
-+#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
-+#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
-+#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
-+#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
-+
-+#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010)
-+
-+#define AR2315_PCI_UNCACHE_CFG (AR2315_PCI + 0x0014)
-+
-+#define AR2315_PCI_IN_EN (AR2315_PCI + 0x0100)
-+#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */
-+#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */
-+#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */
-+#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */
-+
-+#define AR2315_PCI_IN_DIS (AR2315_PCI + 0x0104)
-+#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
-+#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
-+#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
-+#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
-+
-+#define AR2315_PCI_IN_PTR (AR2315_PCI + 0x0200)
-+
-+#define AR2315_PCI_OUT_EN (AR2315_PCI + 0x0400)
-+#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
-+
-+#define AR2315_PCI_OUT_DIS (AR2315_PCI + 0x0404)
-+#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
-+
-+#define AR2315_PCI_OUT_PTR (AR2315_PCI + 0x0408)
-+
-+#define AR2315_PCI_INT_STATUS (AR2315_PCI + 0x0500) /* write one to clr */
-+#define AR2315_PCI_TXINT 0x00000001 /* Desc In Completed */
-+#define AR2315_PCI_TXOK 0x00000002 /* Desc In OK */
-+#define AR2315_PCI_TXERR 0x00000004 /* Desc In ERR */
-+#define AR2315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
-+#define AR2315_PCI_RXINT 0x00000010 /* Desc Out Completed */
-+#define AR2315_PCI_RXOK 0x00000020 /* Desc Out OK */
-+#define AR2315_PCI_RXERR 0x00000040 /* Desc Out ERR */
-+#define AR2315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
-+#define AR2315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
-+#define AR2315_PCI_MASK 0x0000FFFF /* Desc Mask */
-+#define AR2315_PCI_EXT_INT 0x02000000
-+#define AR2315_PCI_ABORT_INT 0x04000000
-+
-+#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */
-+
-+#define AR2315_PCI_INTEN_REG (AR2315_PCI + 0x0508)
-+#define AR2315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
-+#define AR2315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
-+
-+#define AR2315_PCI_HOST_IN_EN (AR2315_PCI + 0x0800)
-+#define AR2315_PCI_HOST_IN_DIS (AR2315_PCI + 0x0804)
-+#define AR2315_PCI_HOST_IN_PTR (AR2315_PCI + 0x0810)
-+#define AR2315_PCI_HOST_OUT_EN (AR2315_PCI + 0x0900)
-+#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904)
-+#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908)
-+
-+
-+/*
-+ * Local Bus Interface Registers
-+ */
-+#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000)
-+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
-+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
-+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
-+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
-+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
-+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
-+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
-+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
-+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
-+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
-+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
-+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
-+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
-+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
-+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
-+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
-+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
-+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
-+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
-+#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
-+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
-+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
-+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
-+
-+#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004)
-+#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */
-+
-+#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008)
-+#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C)
-+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
-+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
-+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
-+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
-+#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80
-+#define AR2315_LBM_TIMEOUT_SHFT 7
-+#define AR2315_LBM_PORTMUX 0x07000000
-+
-+
-+#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010)
-+
-+#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100)
-+#define AR2315_LB_TXEN_0 0x01
-+#define AR2315_LB_TXEN_1 0x02
-+#define AR2315_LB_TXEN_2 0x04
-+#define AR2315_LB_TXEN_3 0x08
-+
-+#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104)
-+#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200)
-+
-+#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400)
-+#define AR2315_LB_RXEN 0x01
-+
-+#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404)
-+#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408)
-+
-+#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500)
-+#define AR2315_INT_TX_DESC 0x0001
-+#define AR2315_INT_TX_OK 0x0002
-+#define AR2315_INT_TX_ERR 0x0004
-+#define AR2315_INT_TX_EOF 0x0008
-+#define AR2315_INT_RX_DESC 0x0010
-+#define AR2315_INT_RX_OK 0x0020
-+#define AR2315_INT_RX_ERR 0x0040
-+#define AR2315_INT_RX_EOF 0x0080
-+#define AR2315_INT_TX_TRUNC 0x0100
-+#define AR2315_INT_TX_STARVE 0x0200
-+#define AR2315_INT_LB_TIMEOUT 0x0400
-+#define AR2315_INT_LB_ERR 0x0800
-+#define AR2315_INT_MBOX_WR 0x1000
-+#define AR2315_INT_MBOX_RD 0x2000
-+
-+/* Bit definitions for INT MASK are the same as INT_STATUS */
-+#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504)
-+
-+#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508)
-+#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600)
-+
-+/*
-+ * IR Interface Registers
-+ */
-+#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000)
-+
-+#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */
-+
-+#define AR2315_IR_CONTROL (AR2315_IR + 0x0800)
-+#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */
-+#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */
-+#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
-+#define AR2315_IRCTL_SAMPLECLK_SHFT 1
-+#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
-+#define AR2315_IRCTL_OUTPUTCLK_SHFT 14
-+
-+#define AR2315_IR_STATUS (AR2315_IR + 0x0804)
-+#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */
-+#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */
-+
-+#define AR2315_IR_CONFIG (AR2315_IR + 0x0808)
-+#define AR2315_IRCFG_INVIN 0x00000001 /* invert input polarity */
-+#define AR2315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
-+#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
-+#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
-+#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
-+#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
-+#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
-+#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
-+#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
-+
-+#define HOST_PCI_DEV_ID 3
-+#define HOST_PCI_MBAR0 0x10000000
-+#define HOST_PCI_MBAR1 0x20000000
-+#define HOST_PCI_MBAR2 0x30000000
-+
-+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
-+#define PCI_DEVICE_MEM_SPACE 0x800000
-+
-+#endif /* __AR2315_REG_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
-@@ -0,0 +1,236 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef AR5312_H
-+#define AR5312_H
-+
-+#include <asm/addrspace.h>
-+
-+/*
-+ * IRQs
-+ */
-+
-+#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-+#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+
-+
-+/* Address Map */
-+#define AR531X_WLAN0 0x18000000
-+#define AR531X_WLAN1 0x18500000
-+#define AR531X_ENET0 0x18100000
-+#define AR531X_ENET1 0x18200000
-+#define AR531X_SDRAMCTL 0x18300000
-+#define AR531X_FLASHCTL 0x18400000
-+#define AR531X_APBBASE 0x1c000000
-+#define AR531X_FLASH 0x1e000000
-+#define AR531X_UART0 0xbc000003 /* UART MMR */
-+
-+/*
-+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
-+ * should be considered available. The AR5312 supports 2 enet MACS,
-+ * even though many reference boards only actually use 1 of them
-+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
-+ * The AR2312 supports 1 enet MAC.
-+ */
-+#define AR531X_NUM_ENET_MAC 2
-+
-+/*
-+ * Need these defines to determine true number of ethernet MACs
-+ */
-+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
-+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
-+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
-+#define AR531X_RADIO_MASK_OFF 0xc8
-+#define AR531X_RADIO0_MASK 0x0003
-+#define AR531X_RADIO1_MASK 0x000c
-+#define AR531X_RADIO1_S 2
-+
-+/*
-+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
-+ * should be considered available.
-+ */
-+#define AR531X_NUM_WMAC 2
-+
-+/* Reset/Timer Block Address Map */
-+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
-+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
-+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
-+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
-+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
-+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
-+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
-+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
-+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
-+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
-+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
-+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
-+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
-+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
-+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
-+
-+/* AR531X_WD_CTRL register bit field definitions */
-+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
-+#define AR531X_WD_CTRL_NMI 0x0001
-+#define AR531X_WD_CTRL_RESET 0x0002
-+
-+/* AR531X_ISR register bit field definitions */
-+#define AR531X_ISR_NONE 0x0000
-+#define AR531X_ISR_TIMER 0x0001
-+#define AR531X_ISR_AHBPROC 0x0002
-+#define AR531X_ISR_AHBDMA 0x0004
-+#define AR531X_ISR_GPIO 0x0008
-+#define AR531X_ISR_UART0 0x0010
-+#define AR531X_ISR_UART0DMA 0x0020
-+#define AR531X_ISR_WD 0x0040
-+#define AR531X_ISR_LOCAL 0x0080
-+
-+/* AR531X_RESET register bit field definitions */
-+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
-+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
-+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
-+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
-+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
-+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
-+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
-+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
-+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
-+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
-+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
-+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
-+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
-+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
-+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
-+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
-+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
-+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
-+
-+#define AR531X_RESET_WMAC0_BITS \
-+ AR531X_RESET_WLAN0 |\
-+ AR531X_RESET_WARM_WLAN0_MAC |\
-+ AR531X_RESET_WARM_WLAN0_BB
-+
-+#define AR531X_RESERT_WMAC1_BITS \
-+ AR531X_RESET_WLAN1 |\
-+ AR531X_RESET_WARM_WLAN1_MAC |\
-+ AR531X_RESET_WARM_WLAN1_BB
-+
-+/* AR5312_CLOCKCTL1 register bit field definitions */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-+
-+/* Valid for AR5312 and AR2312 */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-+
-+/* Valid for AR2313 */
-+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
-+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
-+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
-+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
-+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
-+
-+
-+/* AR531X_ENABLE register bit field definitions */
-+#define AR531X_ENABLE_WLAN0 0x0001
-+#define AR531X_ENABLE_ENET0 0x0002
-+#define AR531X_ENABLE_ENET1 0x0004
-+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
-+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
-+#define AR531X_ENABLE_WLAN1 \
-+ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
-+
-+/* AR531X_REV register bit field definitions */
-+#define AR531X_REV_WMAC_MAJ 0xf000
-+#define AR531X_REV_WMAC_MAJ_S 12
-+#define AR531X_REV_WMAC_MIN 0x0f00
-+#define AR531X_REV_WMAC_MIN_S 8
-+#define AR531X_REV_MAJ 0x00f0
-+#define AR531X_REV_MAJ_S 4
-+#define AR531X_REV_MIN 0x000f
-+#define AR531X_REV_MIN_S 0
-+#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
-+
-+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define AR531X_REV_MAJ_AR5312 0x4
-+#define AR531X_REV_MAJ_AR2313 0x5
-+
-+/* Minor revision numbers, bits 3..0 of Revision ID register */
-+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
-+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
-+
-+/* AR531X_FLASHCTL register bit field definitions */
-+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
-+#define FLASHCTL_IDCY_S 0
-+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
-+#define FLASHCTL_WST1_S 5
-+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
-+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
-+#define FLASHCTL_WST2_S 11
-+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
-+#define FLASHCTL_AC_S 16
-+#define FLASHCTL_AC_128K 0x00000000
-+#define FLASHCTL_AC_256K 0x00010000
-+#define FLASHCTL_AC_512K 0x00020000
-+#define FLASHCTL_AC_1M 0x00030000
-+#define FLASHCTL_AC_2M 0x00040000
-+#define FLASHCTL_AC_4M 0x00050000
-+#define FLASHCTL_AC_8M 0x00060000
-+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
-+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
-+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
-+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
-+#define FLASHCTL_WP 0x04000000 /* Write protect */
-+#define FLASHCTL_BM 0x08000000 /* Burst mode */
-+#define FLASHCTL_MW 0x30000000 /* Memory width */
-+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
-+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
-+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
-+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
-+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
-+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
-+
-+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
-+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
-+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
-+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
-+
-+/* ARM SDRAM Controller -- just enough to determine memory size */
-+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
-+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
-+#define MEM_CFG1_AC0_S 8
-+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
-+#define MEM_CFG1_AC1_S 12
-+
-+/* GPIO Address Map */
-+#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
-+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
-+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
-+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
-+
-+/* GPIO Control Register bit field definitions */
-+#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
-+#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
-+#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
-+#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
-+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
-+#define AR531X_NUM_GPIO 8
-+
-+
-+#endif
-+
---- /dev/null
-+++ b/arch/mips/ar231x/ar5312.c
-@@ -0,0 +1,549 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Platform devices for Atheros SoCs
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/leds.h>
-+#include <asm/bootinfo.h>
-+#include <asm/reboot.h>
-+#include <asm/time.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <gpio.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar5312_regs.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+
-+static void
-+ar5312_misc_irq_dispatch(void)
-+{
-+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR);
-+
-+ if (ar231x_misc_intrs & AR531X_ISR_TIMER) {
-+ do_IRQ(AR531X_MISC_IRQ_TIMER);
-+ (void)ar231x_read_reg(AR531X_TIMER);
-+ } else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC)
-+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-+ else if ((ar231x_misc_intrs & AR531X_ISR_UART0))
-+ do_IRQ(AR531X_MISC_IRQ_UART0);
-+ else if (ar231x_misc_intrs & AR531X_ISR_WD)
-+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-+ else
-+ do_IRQ(AR531X_MISC_IRQ_NONE);
-+}
-+
-+static asmlinkage void
-+ar5312_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP2)
-+ do_IRQ(AR5312_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP3)
-+ do_IRQ(AR5312_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR5312_IRQ_ENET1_INTRS);
-+ else if (pending & CAUSEF_IP5)
-+ do_IRQ(AR5312_IRQ_WLAN1_INTRS);
-+ else if (pending & CAUSEF_IP6)
-+ ar5312_misc_irq_dispatch();
-+ else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
-+}
-+
-+
-+/* Enable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar5312_misc_intr_enable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR531X_IMR);
-+ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-+ ar231x_write_reg(AR531X_IMR, imr);
-+}
-+
-+/* Disable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar5312_misc_intr_disable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR531X_IMR);
-+ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-+ ar231x_write_reg(AR531X_IMR, imr);
-+ ar231x_read_reg(AR531X_IMR); /* flush write buffer */
-+}
-+
-+static void
-+ar5312_misc_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar5312_misc_intr_enable(irq);
-+}
-+
-+static struct irq_chip ar5312_misc_intr_controller = {
-+ .name = "AR5312-MISC",
-+ .disable = ar5312_misc_intr_disable,
-+ .ack = ar5312_misc_intr_disable,
-+ .mask_ack = ar5312_misc_intr_disable,
-+ .mask = ar5312_misc_intr_disable,
-+ .unmask = ar5312_misc_intr_enable,
-+ .end = ar5312_misc_intr_end,
-+};
-+
-+
-+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ u32 proc1 = ar231x_read_reg(AR531X_PROC1);
-+ u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */
-+ u32 dma1 = ar231x_read_reg(AR531X_DMA1);
-+ u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR); /* clears error state */
-+
-+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
-+ procAddr, proc1, dmaAddr, dma1);
-+
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static struct irqaction ar5312_ahb_proc_interrupt = {
-+ .handler = ar5312_ahb_proc_handler,
-+ .flags = IRQF_DISABLED,
-+ .name = "ar5312_ahb_proc_interrupt",
-+};
-+
-+
-+static struct irqaction cascade = {
-+ .handler = no_action,
-+ .flags = IRQF_DISABLED,
-+ .name = "cascade",
-+};
-+
-+void __init ar5312_irq_init(void)
-+{
-+ int i;
-+
-+ if (!is_5312())
-+ return;
-+
-+ ar231x_irq_dispatch = ar5312_irq_dispatch;
-+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
-+ int irq = AR531X_MISC_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar5312_misc_intr_controller,
-+ handle_level_irq);
-+ }
-+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
-+ setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
-+}
-+
-+const struct ar231x_gpiodev ar5312_gpiodev;
-+
-+static u32
-+ar5312_gpio_get_output(void)
-+{
-+ u32 reg;
-+ reg = ~(ar231x_read_reg(AR531X_GPIO_CR));
-+ reg &= ar5312_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_set_output(u32 mask, u32 val)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR531X_GPIO_CR);
-+ reg |= mask;
-+ reg &= ~val;
-+ ar231x_write_reg(AR531X_GPIO_CR, reg);
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_get(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR531X_GPIO_DI);
-+ reg &= ar5312_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_set(u32 mask, u32 value)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR531X_GPIO_DO);
-+ reg &= ~mask;
-+ reg |= value;
-+ ar231x_write_reg(AR531X_GPIO_DO, reg);
-+ return reg;
-+}
-+
-+const struct ar231x_gpiodev ar5312_gpiodev = {
-+ .valid_mask = (1 << 8) - 1,
-+ .get_output = ar5312_gpio_get_output,
-+ .set_output = ar5312_gpio_set_output,
-+ .get = ar5312_gpio_get,
-+ .set = ar5312_gpio_set,
-+};
-+
-+static struct physmap_flash_data ar5312_flash_data = {
-+ .width = 2,
-+};
-+
-+static struct resource ar5312_flash_resource = {
-+ .start = AR531X_FLASH,
-+ .end = AR531X_FLASH + 0x800000 - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct ar231x_eth ar5312_eth0_data = {
-+ .reset_base = AR531X_RESET,
-+ .reset_mac = AR531X_RESET_ENET0,
-+ .reset_phy = AR531X_RESET_EPHY0,
-+ .phy_base = KSEG1ADDR(AR531X_ENET0),
-+ .config = &ar231x_board,
-+};
-+
-+static struct ar231x_eth ar5312_eth1_data = {
-+ .reset_base = AR531X_RESET,
-+ .reset_mac = AR531X_RESET_ENET1,
-+ .reset_phy = AR531X_RESET_EPHY1,
-+ .phy_base = KSEG1ADDR(AR531X_ENET1),
-+ .config = &ar231x_board,
-+};
-+
-+static struct platform_device ar5312_physmap_flash = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .dev.platform_data = &ar5312_flash_data,
-+ .resource = &ar5312_flash_resource,
-+ .num_resources = 1,
-+};
-+
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar5312_leds[] = {
-+ { .name = "wlan", .gpio = 0, .active_low = 1, },
-+};
-+
-+static const struct gpio_led_platform_data ar5312_led_data = {
-+ .num_leds = ARRAY_SIZE(ar5312_leds),
-+ .leds = (void *) ar5312_leds,
-+};
-+
-+static struct platform_device ar5312_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = (void *) &ar5312_led_data,
-+};
-+#endif
-+
-+/*
-+ * NB: This mapping size is larger than the actual flash size,
-+ * but this shouldn't be a problem here, because the flash
-+ * will simply be mapped multiple times.
-+ */
-+static char __init *ar5312_flash_limit(void)
-+{
-+ u32 ctl;
-+ /*
-+ * Configure flash bank 0.
-+ * Assume 8M window size. Flash will be aliased if it's smaller
-+ */
-+ ctl = FLASHCTL_E |
-+ FLASHCTL_AC_8M |
-+ FLASHCTL_RBLE |
-+ (0x01 << FLASHCTL_IDCY_S) |
-+ (0x07 << FLASHCTL_WST1_S) |
-+ (0x07 << FLASHCTL_WST2_S) |
-+ (ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW);
-+
-+ ar231x_write_reg(AR531X_FLASHCTL0, ctl);
-+
-+ /* Disable other flash banks */
-+ ar231x_write_reg(AR531X_FLASHCTL1,
-+ ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+ ar231x_write_reg(AR531X_FLASHCTL2,
-+ ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
-+}
-+
-+int __init ar5312_init_devices(void)
-+{
-+ struct ar231x_boarddata *config;
-+ u32 fctl = 0;
-+ const u8 *radio;
-+ u8 *c;
-+
-+ if (!is_5312())
-+ return 0;
-+
-+ /* Locate board/radio config data */
-+ ar231x_find_config(ar5312_flash_limit());
-+ config = ar231x_board.config;
-+
-+
-+ /*
-+ * Chip IDs and hardware detection for some Atheros
-+ * models are really broken!
-+ *
-+ * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
-+ * as indication for AR2312, which is otherwise
-+ * indistinguishable from the real AR5312.
-+ */
-+ if (ar231x_board.radio) {
-+ radio = ar231x_board.radio + AR531X_RADIO_MASK_OFF;
-+ if ((*((const u32 *) radio) & AR531X_RADIO0_MASK) == 0)
-+ config->flags |= BD_ISCASPER;
-+ } else
-+ radio = NULL;
-+
-+ /* AR2313 has CPU minor rev. 10 */
-+ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
-+ ar231x_devtype = DEV_TYPE_AR2313;
-+
-+ /* AR2312 shares the same Silicon ID as AR5312 */
-+ else if (config->flags & BD_ISCASPER)
-+ ar231x_devtype = DEV_TYPE_AR2312;
-+
-+ /* Everything else is probably AR5312 or compatible */
-+ else
-+ ar231x_devtype = DEV_TYPE_AR5312;
-+
-+ /* fixup flash width */
-+ fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW;
-+ switch (fctl) {
-+ case FLASHCTL_MWx16:
-+ ar5312_flash_data.width = 2;
-+ break;
-+ case FLASHCTL_MWx8:
-+ default:
-+ ar5312_flash_data.width = 1;
-+ break;
-+ }
-+
-+ platform_device_register(&ar5312_physmap_flash);
-+
-+#ifdef CONFIG_LEDS_GPIO
-+ ar5312_leds[0].gpio = config->sysLedGpio;
-+ platform_device_register(&ar5312_gpio_leds);
-+#endif
-+
-+ /* Fix up MAC addresses if necessary */
-+ if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6))
-+ memcpy(config->enet0_mac, config->enet1_mac, 6);
-+
-+ /* If ENET0 and ENET1 have the same mac address,
-+ * increment the one from ENET1 */
-+ if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) {
-+ c = config->enet1_mac + 5;
-+ while ((c >= config->enet1_mac) && !(++(*c)))
-+ c--;
-+ }
-+
-+ switch(ar231x_devtype) {
-+ case DEV_TYPE_AR5312:
-+ ar5312_eth0_data.macaddr = config->enet0_mac;
-+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
-+ AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data);
-+
-+ ar5312_eth1_data.macaddr = config->enet1_mac;
-+ ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1),
-+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
-+
-+ if (!ar231x_board.radio)
-+ return 0;
-+
-+ if ((*((u32 *) radio) & AR531X_RADIO0_MASK) &&
-+ (config->flags & BD_WLAN0))
-+ ar231x_add_wmac(0, AR531X_WLAN0,
-+ AR5312_IRQ_WLAN0_INTRS);
-+
-+ break;
-+ /*
-+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
-+ * of ENET1. Atheros calls it 'twisted' for a reason :)
-+ */
-+ case DEV_TYPE_AR2312:
-+ case DEV_TYPE_AR2313:
-+ ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base;
-+ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
-+ ar5312_eth1_data.macaddr = config->enet0_mac;
-+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1),
-+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
-+
-+ if (!ar231x_board.radio)
-+ return 0;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ if ((*((u32 *) radio) & AR531X_RADIO1_MASK) &&
-+ (config->flags & BD_WLAN1))
-+ ar231x_add_wmac(1, AR531X_WLAN1,
-+ AR5312_IRQ_WLAN1_INTRS);
-+
-+ return 0;
-+}
-+
-+
-+static void ar5312_restart(char *command)
-+{
-+ /* reset the system */
-+ local_irq_disable();
-+ while(1) {
-+ ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM);
-+ }
-+}
-+
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
-+
-+
-+static int __init
-+ar5312_cpu_frequency(void)
-+{
-+ unsigned int result;
-+ unsigned int predivide_mask, predivide_shift;
-+ unsigned int multiplier_mask, multiplier_shift;
-+ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
-+ unsigned int doubler_mask;
-+ u16 devid;
-+
-+ /* Trust the bootrom's idea of cpu frequency. */
-+ if ((result = ar231x_read_reg(AR5312_SCRATCH)))
-+ return result;
-+
-+ devid = ar231x_read_reg(AR531X_REV);
-+ devid &= AR531X_REV_MAJ;
-+ devid >>= AR531X_REV_MAJ_S;
-+ if (devid == AR531X_REV_MAJ_AR2313) {
-+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
-+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
-+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
-+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
-+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
-+ } else { /* AR5312 and AR2312 */
-+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
-+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
-+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
-+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
-+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
-+ }
-+
-+ /*
-+ * Clocking is derived from a fixed 40MHz input clock.
-+ *
-+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
-+ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
-+ * flash, Timer, Watchdog Timer)
-+ *
-+ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
-+ *
-+ * So, for example, with a PLL multiplier of 5, we have
-+ *
-+ * cpuFreq = 200MHz
-+ * sysFreq = 50MHz
-+ * cntFreq = 100MHz
-+ *
-+ * We compute the CPU frequency, based on PLL settings.
-+ */
-+
-+ clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1);
-+ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
-+ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
-+ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
-+
-+ if (clockCtl1 & doubler_mask) {
-+ multiplier = multiplier << 1;
-+ }
-+ return (40000000 / preDivisor) * multiplier;
-+}
-+
-+static inline int
-+ar5312_sys_frequency(void)
-+{
-+ return ar5312_cpu_frequency() / 4;
-+}
-+
-+void __init
-+ar5312_time_init(void)
-+{
-+ if (!is_5312())
-+ return;
-+
-+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
-+}
-+
-+
-+void __init
-+ar5312_prom_init(void)
-+{
-+ u32 memsize, memcfg, bank0AC, bank1AC;
-+ u32 devid;
-+
-+ if (!is_5312())
-+ return;
-+
-+ /* Detect memory size */
-+ memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
-+ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
-+ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
-+ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
-+ + (bank1AC ? (1 << (bank1AC+1)) : 0);
-+ memsize <<= 20;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ devid = ar231x_read_reg(AR531X_REV);
-+ devid >>= AR531X_REV_WMAC_MIN_S;
-+ devid &= AR531X_REV_CHIP;
-+ ar231x_board.devid = (u16) devid;
-+ ar231x_gpiodev = &ar5312_gpiodev;
-+}
-+
-+void __init
-+ar5312_plat_setup(void)
-+{
-+ if (!is_5312())
-+ return;
-+
-+ /* Clear any lingering AHB errors */
-+ ar231x_read_reg(AR531X_PROCADDR);
-+ ar231x_read_reg(AR531X_DMAADDR);
-+ ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
-+
-+ _machine_restart = ar5312_restart;
-+ ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
-+}
-+
---- /dev/null
-+++ b/arch/mips/ar231x/ar2315.c
-@@ -0,0 +1,658 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Platform devices for Atheros SoCs
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/delay.h>
-+#include <linux/leds.h>
-+#include <asm/bootinfo.h>
-+#include <asm/reboot.h>
-+#include <asm/time.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <asm/gpio.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar2315_regs.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar2315.h"
-+
-+static u32 gpiointmask = 0, gpiointval = 0;
-+
-+static inline void ar2315_gpio_irq(void)
-+{
-+ u32 pend;
-+ int bit = -1;
-+
-+ /* only do one gpio interrupt at a time */
-+ pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask;
-+
-+ if (pend) {
-+ bit = fls(pend) - 1;
-+ pend &= ~(1 << bit);
-+ gpiointval ^= (1 << bit);
-+ }
-+
-+ if (!pend)
-+ ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO);
-+
-+ /* Enable interrupt with edge detection */
-+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(bit)) != AR2315_GPIO_CR_I(bit))
-+ return;
-+
-+ if (bit >= 0)
-+ do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
-+}
-+
-+
-+/*
-+ * Called when an interrupt is received, this function
-+ * determines exactly which interrupt it was, and it
-+ * invokes the appropriate handler.
-+ *
-+ * Implicitly, we also define interrupt priority by
-+ * choosing which to dispatch first.
-+ */
-+static asmlinkage void
-+ar2315_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP3)
-+ do_IRQ(AR2315_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR2315_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP2) {
-+ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
-+
-+ if (misc_intr & AR2315_ISR_SPI)
-+ do_IRQ(AR531X_MISC_IRQ_SPI);
-+ else if (misc_intr & AR2315_ISR_TIMER)
-+ do_IRQ(AR531X_MISC_IRQ_TIMER);
-+ else if (misc_intr & AR2315_ISR_AHB)
-+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-+ else if (misc_intr & AR2315_ISR_GPIO)
-+ ar2315_gpio_irq();
-+ else if (misc_intr & AR2315_ISR_UART0)
-+ do_IRQ(AR531X_MISC_IRQ_UART0);
-+ else if (misc_intr & AR2315_ISR_WD)
-+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-+ else
-+ do_IRQ(AR531X_MISC_IRQ_NONE);
-+ } else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
-+}
-+
-+static void ar2315_set_gpiointmask(int gpio, int level)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR2315_GPIO_INT);
-+ reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M);
-+ reg |= gpio | AR2315_GPIO_INT_LVL(level);
-+ ar231x_write_reg(AR2315_GPIO_INT, reg);
-+}
-+
-+static void ar2315_gpio_intr_enable(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* Enable interrupt with edge detection */
-+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(gpio)) != AR2315_GPIO_CR_I(gpio))
-+ return;
-+
-+ gpiointmask |= (1 << gpio);
-+ ar2315_set_gpiointmask(gpio, 3);
-+}
-+
-+static unsigned int ar2315_gpio_intr_startup(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* reconfigure GPIO line as input */
-+ ar231x_mask_reg(AR2315_GPIO_CR, AR2315_GPIO_CR_M(gpio), AR2315_GPIO_CR_I(gpio));
-+ ar2315_gpio_intr_enable(irq);
-+ return 0;
-+}
-+
-+static void ar2315_gpio_intr_disable(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* Disable interrupt */
-+ gpiointmask &= ~(1 << gpio);
-+ ar2315_set_gpiointmask(gpio, 0);
-+}
-+
-+static void
-+ar2315_gpio_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar2315_gpio_intr_enable(irq);
-+}
-+
-+static struct irq_chip ar2315_gpio_intr_controller = {
-+ .typename = "AR2315-GPIO",
-+ .startup = ar2315_gpio_intr_startup,
-+ .ack = ar2315_gpio_intr_disable,
-+ .mask_ack = ar2315_gpio_intr_disable,
-+ .mask = ar2315_gpio_intr_disable,
-+ .unmask = ar2315_gpio_intr_enable,
-+ .end = ar2315_gpio_intr_end,
-+};
-+
-+static void
-+ar2315_misc_intr_enable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR2315_IMR);
-+ switch(irq) {
-+ case AR531X_MISC_IRQ_SPI:
-+ imr |= AR2315_ISR_SPI;
-+ break;
-+ case AR531X_MISC_IRQ_TIMER:
-+ imr |= AR2315_ISR_TIMER;
-+ break;
-+ case AR531X_MISC_IRQ_AHB_PROC:
-+ imr |= AR2315_ISR_AHB;
-+ break;
-+ case AR531X_MISC_IRQ_GPIO:
-+ imr |= AR2315_ISR_GPIO;
-+ break;
-+ case AR531X_MISC_IRQ_UART0:
-+ imr |= AR2315_ISR_UART0;
-+ break;
-+ case AR531X_MISC_IRQ_WATCHDOG:
-+ imr |= AR2315_ISR_WD;
-+ break;
-+ default:
-+ break;
-+ }
-+ ar231x_write_reg(AR2315_IMR, imr);
-+}
-+
-+static void
-+ar2315_misc_intr_disable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR2315_IMR);
-+ switch(irq) {
-+ case AR531X_MISC_IRQ_SPI:
-+ imr &= ~AR2315_ISR_SPI;
-+ break;
-+ case AR531X_MISC_IRQ_TIMER:
-+ imr &= ~AR2315_ISR_TIMER;
-+ break;
-+ case AR531X_MISC_IRQ_AHB_PROC:
-+ imr &= ~AR2315_ISR_AHB;
-+ break;
-+ case AR531X_MISC_IRQ_GPIO:
-+ imr &= ~AR2315_ISR_GPIO;
-+ break;
-+ case AR531X_MISC_IRQ_UART0:
-+ imr &= ~AR2315_ISR_UART0;
-+ break;
-+ case AR531X_MISC_IRQ_WATCHDOG:
-+ imr &= ~AR2315_ISR_WD;
-+ break;
-+ default:
-+ break;
-+ }
-+ ar231x_write_reg(AR2315_IMR, imr);
-+}
-+
-+static void
-+ar2315_misc_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar2315_misc_intr_enable(irq);
-+}
-+
-+
-+static struct irq_chip ar2315_misc_intr_controller = {
-+ .typename = "AR2315-MISC",
-+ .ack = ar2315_misc_intr_disable,
-+ .mask_ack = ar2315_misc_intr_disable,
-+ .mask = ar2315_misc_intr_disable,
-+ .unmask = ar2315_misc_intr_enable,
-+ .end = ar2315_misc_intr_end,
-+};
-+
-+static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
-+ ar231x_read_reg(AR2315_AHB_ERR1);
-+
-+ printk(KERN_ERR "AHB fatal error\n");
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction ar2315_ahb_proc_interrupt = {
-+ .handler = ar2315_ahb_proc_handler,
-+ .flags = IRQF_DISABLED,
-+ .name = "ar2315_ahb_proc_interrupt",
-+};
-+
-+static struct irqaction cascade = {
-+ .handler = no_action,
-+ .flags = IRQF_DISABLED,
-+ .name = "cascade",
-+};
-+
-+void
-+ar2315_irq_init(void)
-+{
-+ int i;
-+
-+ if (!is_2315())
-+ return;
-+
-+ ar231x_irq_dispatch = ar2315_irq_dispatch;
-+ gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
-+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
-+ int irq = AR531X_MISC_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar2315_misc_intr_controller,
-+ handle_level_irq);
-+ }
-+ for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) {
-+ int irq = AR531X_GPIO_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar2315_gpio_intr_controller,
-+ handle_level_irq);
-+ }
-+ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
-+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt);
-+ setup_irq(AR2315_IRQ_MISC_INTRS, &cascade);
-+}
-+
-+const struct ar231x_gpiodev ar2315_gpiodev;
-+
-+static u32
-+ar2315_gpio_get_output(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_CR);
-+ reg &= ar2315_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_set_output(u32 mask, u32 val)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR2315_GPIO_CR);
-+ reg &= ~mask;
-+ reg |= val;
-+ ar231x_write_reg(AR2315_GPIO_CR, reg);
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_get(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_DI);
-+ reg &= ar2315_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_set(u32 mask, u32 value)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_DO);
-+ reg &= ~mask;
-+ reg |= value;
-+ ar231x_write_reg(AR2315_GPIO_DO, reg);
-+ return reg;
-+}
-+
-+const struct ar231x_gpiodev ar2315_gpiodev = {
-+ .valid_mask = (1 << 22) - 1,
-+ .get_output = ar2315_gpio_get_output,
-+ .set_output = ar2315_gpio_set_output,
-+ .get = ar2315_gpio_get,
-+ .set = ar2315_gpio_set,
-+};
-+
-+static struct ar231x_eth ar2315_eth_data = {
-+ .reset_base = AR2315_RESET,
-+ .reset_mac = AR2315_RESET_ENET0,
-+ .reset_phy = AR2315_RESET_EPHY0,
-+ .phy_base = AR2315_ENET0,
-+ .config = &ar231x_board,
-+};
-+
-+static struct resource ar2315_spiflash_res[] = {
-+ {
-+ .name = "flash_base",
-+ .flags = IORESOURCE_MEM,
-+ .start = KSEG1ADDR(AR2315_SPI_READ),
-+ .end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1,
-+ },
-+ {
-+ .name = "flash_regs",
-+ .flags = IORESOURCE_MEM,
-+ .start = 0x11300000,
-+ .end = 0x11300012,
-+ },
-+};
-+
-+static struct platform_device ar2315_spiflash = {
-+ .id = 0,
-+ .name = "spiflash",
-+ .resource = ar2315_spiflash_res,
-+ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
-+};
-+
-+static struct platform_device ar2315_wdt = {
-+ .id = 0,
-+ .name = "ar2315_wdt",
-+};
-+
-+#define SPI_FLASH_CTL 0x00
-+#define SPI_FLASH_OPCODE 0x04
-+#define SPI_FLASH_DATA 0x08
-+
-+static inline u32
-+spiflash_read_reg(int reg)
-+{
-+ return ar231x_read_reg(KSEG1ADDR(AR2315_SPI) + reg);
-+}
-+
-+static inline void
-+spiflash_write_reg(int reg, u32 data)
-+{
-+ ar231x_write_reg(KSEG1ADDR(AR2315_SPI) + reg, data);
-+}
-+
-+static u32
-+spiflash_wait_status(void)
-+{
-+ u32 reg;
-+
-+ do {
-+ reg = spiflash_read_reg(SPI_FLASH_CTL);
-+ } while (reg & SPI_CTL_BUSY);
-+
-+ return reg;
-+}
-+
-+static u8
-+spiflash_probe(void)
-+{
-+ u32 reg;
-+
-+ reg = spiflash_wait_status();
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= (1 << 4) | 4 | SPI_CTL_START;
-+
-+ spiflash_write_reg(SPI_FLASH_OPCODE, 0xab);
-+ spiflash_write_reg(SPI_FLASH_CTL, reg);
-+
-+ reg = spiflash_wait_status();
-+ reg = spiflash_read_reg(SPI_FLASH_DATA);
-+ reg &= 0xff;
-+
-+ return (u8) reg;
-+}
-+
-+
-+#define STM_8MBIT_SIGNATURE 0x13
-+#define STM_16MBIT_SIGNATURE 0x14
-+#define STM_32MBIT_SIGNATURE 0x15
-+#define STM_64MBIT_SIGNATURE 0x16
-+#define STM_128MBIT_SIGNATURE 0x17
-+
-+static u8 __init *
-+ar2315_flash_limit(void)
-+{
-+ u32 flash_size = 0;
-+
-+ /* probe the flash chip size */
-+ switch(spiflash_probe()) {
-+ case STM_8MBIT_SIGNATURE:
-+ flash_size = 0x00100000;
-+ break;
-+ case STM_16MBIT_SIGNATURE:
-+ flash_size = 0x00200000;
-+ break;
-+ case STM_32MBIT_SIGNATURE:
-+ flash_size = 0x00400000;
-+ break;
-+ case STM_64MBIT_SIGNATURE:
-+ flash_size = 0x00800000;
-+ break;
-+ case STM_128MBIT_SIGNATURE:
-+ flash_size = 0x01000000;
-+ break;
-+ }
-+
-+ ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start +
-+ flash_size - 1;
-+ return (u8 *) ar2315_spiflash_res[0].end + 1;
-+}
-+
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar2315_leds[6];
-+static struct gpio_led_platform_data ar2315_led_data = {
-+ .leds = (void *) ar2315_leds,
-+};
-+
-+static struct platform_device ar2315_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = (void *) &ar2315_led_data,
-+ }
-+};
-+
-+static void __init
-+ar2315_init_gpio(void)
-+{
-+ static char led_names[6][6];
-+ int i, led = 0;
-+
-+ ar2315_led_data.num_leds = 0;
-+ for(i = 1; i < 8; i++)
-+ {
-+ if((i == AR2315_RESET_GPIO) ||
-+ (i == ar231x_board.config->resetConfigGpio))
-+ continue;
-+
-+ if(i == ar231x_board.config->sysLedGpio)
-+ strcpy(led_names[led], "wlan");
-+ else
-+ sprintf(led_names[led], "gpio%d", i);
-+
-+ ar2315_leds[led].name = led_names[led];
-+ ar2315_leds[led].gpio = i;
-+ ar2315_leds[led].active_low = 0;
-+ led++;
-+ }
-+ ar2315_led_data.num_leds = led;
-+ platform_device_register(&ar2315_gpio_leds);
-+}
-+#else
-+static inline void ar2315_init_gpio(void)
-+{
-+}
-+#endif
-+
-+int __init
-+ar2315_init_devices(void)
-+{
-+ if (!is_2315())
-+ return 0;
-+
-+ /* Find board configuration */
-+ ar231x_find_config(ar2315_flash_limit());
-+ ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
-+
-+ ar2315_init_gpio();
-+ platform_device_register(&ar2315_wdt);
-+ platform_device_register(&ar2315_spiflash);
-+ ar231x_add_ethernet(0, AR2315_ENET0, AR2315_IRQ_ENET0_INTRS,
-+ &ar2315_eth_data);
-+ ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
-+
-+ return 0;
-+}
-+
-+static void
-+ar2315_restart(char *command)
-+{
-+ void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
-+
-+ local_irq_disable();
-+
-+ /* try reset the system via reset control */
-+ ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM);
-+
-+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
-+ * give it some time to attempt a gpio based hardware reset
-+ * (atheros reference design workaround) */
-+ gpio_direction_output(AR2315_RESET_GPIO, 0);
-+ mdelay(100);
-+
-+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
-+ * workaround. Attempt to jump to the mips reset location -
-+ * the boot loader itself might be able to recover the system */
-+ mips_reset_vec();
-+}
-+
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
-+static int __initdata PLLC_DIVIDE_TABLE[5] = { 2, 3, 4, 6, 3 };
-+
-+static unsigned int __init
-+ar2315_sys_clk(unsigned int clockCtl)
-+{
-+ unsigned int pllcCtrl,cpuDiv;
-+ unsigned int pllcOut,refdiv,fdiv,divby2;
-+ unsigned int clkDiv;
-+
-+ pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL);
-+ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
-+ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
-+ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
-+ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
-+ divby2 += 1;
-+ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
-+
-+
-+ /* clkm input selected */
-+ switch(clockCtl & CPUCLK_CLK_SEL_M) {
-+ case 0:
-+ case 1:
-+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
-+ break;
-+ case 2:
-+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
-+ break;
-+ default:
-+ pllcOut = 40000000;
-+ clkDiv = 1;
-+ break;
-+ }
-+ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
-+ cpuDiv = cpuDiv * 2 ?: 1;
-+ return (pllcOut/(clkDiv * cpuDiv));
-+}
-+
-+static inline unsigned int
-+ar2315_cpu_frequency(void)
-+{
-+ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK));
-+}
-+
-+static inline unsigned int
-+ar2315_apb_frequency(void)
-+{
-+ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK));
-+}
-+
-+void __init
-+ar2315_time_init(void)
-+{
-+ if (!is_2315())
-+ return;
-+
-+ mips_hpt_frequency = ar2315_cpu_frequency() / 2;
-+}
-+
-+void __init
-+ar2315_prom_init(void)
-+{
-+ u32 memsize, memcfg, devid;
-+
-+ if (!is_2315())
-+ return;
-+
-+ memcfg = ar231x_read_reg(AR2315_MEM_CFG);
-+ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
-+ memsize <<= 3;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ /* Detect the hardware based on the device ID */
-+ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP;
-+ switch(devid) {
-+ case 0x90:
-+ case 0x91:
-+ ar231x_devtype = DEV_TYPE_AR2317;
-+ break;
-+ default:
-+ ar231x_devtype = DEV_TYPE_AR2315;
-+ break;
-+ }
-+ ar231x_gpiodev = &ar2315_gpiodev;
-+ ar231x_board.devid = devid;
-+}
-+
-+void __init
-+ar2315_plat_setup(void)
-+{
-+ u32 config;
-+
-+ if (!is_2315())
-+ return;
-+
-+ /* Clear any lingering AHB errors */
-+ config = read_c0_config();
-+ write_c0_config(config & ~0x3);
-+ ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET);
-+ ar231x_read_reg(AR2315_AHB_ERR1);
-+ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
-+
-+ _machine_restart = ar2315_restart;
-+ ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency());
-+}
---- /dev/null
-+++ b/arch/mips/ar231x/ar2315.h
-@@ -0,0 +1,37 @@
-+#ifndef __AR2315_H
-+#define __AR2315_H
-+
-+#ifdef CONFIG_ATHEROS_AR2315
-+
-+extern void ar2315_irq_init(void);
-+extern int ar2315_init_devices(void);
-+extern void ar2315_prom_init(void);
-+extern void ar2315_plat_setup(void);
-+extern void ar2315_time_init(void);
-+
-+#else
-+
-+static inline void ar2315_irq_init(void)
-+{
-+}
-+
-+static inline int ar2315_init_devices(void)
-+{
-+ return 0;
-+}
-+
-+static inline void ar2315_prom_init(void)
-+{
-+}
-+
-+static inline void ar2315_plat_setup(void)
-+{
-+}
-+
-+static inline void ar2315_time_init(void)
-+{
-+}
-+
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/ar5312.h
-@@ -0,0 +1,38 @@
-+#ifndef __AR5312_H
-+#define __AR5312_H
-+
-+#ifdef CONFIG_ATHEROS_AR5312
-+
-+extern void ar5312_irq_init(void);
-+extern int ar5312_init_devices(void);
-+extern void ar5312_prom_init(void);
-+extern void ar5312_plat_setup(void);
-+extern void ar5312_time_init(void);
-+extern void ar5312_time_init(void);
-+
-+#else
-+
-+static inline void ar5312_irq_init(void)
-+{
-+}
-+
-+static inline int ar5312_init_devices(void)
-+{
-+ return 0;
-+}
-+
-+static inline void ar5312_prom_init(void)
-+{
-+}
-+
-+static inline void ar5312_plat_setup(void)
-+{
-+}
-+
-+static inline void ar5312_time_init(void)
-+{
-+}
-+
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar231x.h
-@@ -0,0 +1,54 @@
-+#ifndef __AR531X_H
-+#define __AR531X_H
-+
-+#define AR531X_MISC_IRQ_BASE 0x20
-+#define AR531X_GPIO_IRQ_BASE 0x30
-+
-+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
-+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
-+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-+
-+/* Miscellaneous interrupts, which share IP6 */
-+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
-+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
-+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
-+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
-+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
-+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
-+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
-+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
-+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
-+#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9
-+#define AR531X_MISC_IRQ_COUNT 10
-+
-+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
-+#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0
-+#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n
-+#define AR531X_GPIO_IRQ_COUNT 22
-+
-+static inline u32
-+ar231x_read_reg(u32 reg)
-+{
-+ return __raw_readl((u32 *) KSEG1ADDR(reg));
-+}
-+
-+static inline void
-+ar231x_write_reg(u32 reg, u32 val)
-+{
-+ __raw_writel(val, (u32 *) KSEG1ADDR(reg));
-+}
-+
-+static inline u32
-+ar231x_mask_reg(u32 reg, u32 mask, u32 val)
-+{
-+ u32 ret;
-+
-+ ret = ar231x_read_reg(reg);
-+ ret &= ~mask;
-+ ret |= val;
-+ ar231x_write_reg(reg, ret);
-+
-+ return ret;
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/devices.h
-@@ -0,0 +1,37 @@
-+#ifndef __AR231X_DEVICES_H
-+#define __AR231X_DEVICES_H
-+
-+enum {
-+ /* handled by ar5312.c */
-+ DEV_TYPE_AR2312,
-+ DEV_TYPE_AR2313,
-+ DEV_TYPE_AR5312,
-+
-+ /* handled by ar2315.c */
-+ DEV_TYPE_AR2315,
-+ DEV_TYPE_AR2316,
-+ DEV_TYPE_AR2317,
-+
-+ DEV_TYPE_UNKNOWN
-+};
-+
-+extern int ar231x_devtype;
-+extern struct ar231x_board_config ar231x_board;
-+extern asmlinkage void (*ar231x_irq_dispatch)(void);
-+
-+extern int ar231x_find_config(u8 *flash_limit);
-+extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk);
-+extern int ar231x_add_wmac(int nr, u32 base, int irq);
-+extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata);
-+
-+static inline bool is_2315(void)
-+{
-+ return (current_cpu_data.cputype == CPU_4KEC);
-+}
-+
-+static inline bool is_5312(void)
-+{
-+ return !is_2315();
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/devices.c
-@@ -0,0 +1,175 @@
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial_8250.h>
-+#include <linux/platform_device.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+struct ar231x_board_config ar231x_board;
-+int ar231x_devtype = DEV_TYPE_UNKNOWN;
-+const struct ar231x_gpiodev *ar231x_gpiodev;
-+EXPORT_SYMBOL(ar231x_gpiodev);
-+
-+static struct resource ar231x_eth0_res[] = {
-+ {
-+ .name = "eth0_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth0_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct resource ar231x_eth1_res[] = {
-+ {
-+ .name = "eth1_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth1_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device ar231x_eth[] = {
-+ {
-+ .id = 0,
-+ .name = "ar231x-eth",
-+ .resource = ar231x_eth0_res,
-+ .num_resources = ARRAY_SIZE(ar231x_eth0_res)
-+ },
-+ {
-+ .id = 1,
-+ .name = "ar231x-eth",
-+ .resource = ar231x_eth1_res,
-+ .num_resources = ARRAY_SIZE(ar231x_eth1_res)
-+ }
-+};
-+
-+static struct resource ar231x_wmac0_res[] = {
-+ {
-+ .name = "wmac0_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "wmac0_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct resource ar231x_wmac1_res[] = {
-+ {
-+ .name = "wmac1_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "wmac1_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+
-+static struct platform_device ar231x_wmac[] = {
-+ {
-+ .id = 0,
-+ .name = "ar231x-wmac",
-+ .resource = ar231x_wmac0_res,
-+ .num_resources = ARRAY_SIZE(ar231x_wmac0_res),
-+ .dev.platform_data = &ar231x_board,
-+ },
-+ {
-+ .id = 1,
-+ .name = "ar231x-wmac",
-+ .resource = ar231x_wmac1_res,
-+ .num_resources = ARRAY_SIZE(ar231x_wmac1_res),
-+ .dev.platform_data = &ar231x_board,
-+ },
-+};
-+
-+static const char *devtype_strings[] = {
-+ [DEV_TYPE_AR5312] = "Atheros AR5312",
-+ [DEV_TYPE_AR2312] = "Atheros AR2312",
-+ [DEV_TYPE_AR2313] = "Atheros AR2313",
-+ [DEV_TYPE_AR2315] = "Atheros AR2315",
-+ [DEV_TYPE_AR2316] = "Atheros AR2316",
-+ [DEV_TYPE_AR2317] = "Atheros AR2317",
-+ [DEV_TYPE_UNKNOWN] = "Atheros (unknown)",
-+};
-+
-+const char *get_system_type(void)
-+{
-+ if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) ||
-+ !devtype_strings[ar231x_devtype])
-+ return devtype_strings[DEV_TYPE_UNKNOWN];
-+ return devtype_strings[ar231x_devtype];
-+}
-+
-+
-+int __init
-+ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata)
-+{
-+ struct resource *res;
-+
-+ ar231x_eth[nr].dev.platform_data = pdata;
-+ res = &ar231x_eth[nr].resource[0];
-+ res->start = base;
-+ res->end = base + 0x2000 - 1;
-+ res++;
-+ res->start = irq;
-+ res->end = irq;
-+ return platform_device_register(&ar231x_eth[nr]);
-+}
-+
-+void __init
-+ar231x_serial_setup(u32 mapbase, unsigned int uartclk)
-+{
-+ struct uart_port s;
-+
-+ memset(&s, 0, sizeof(s));
-+
-+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-+ s.iotype = UPIO_MEM;
-+ s.irq = AR531X_MISC_IRQ_UART0;
-+ s.regshift = 2;
-+ s.mapbase = mapbase;
-+ s.uartclk = uartclk;
-+ s.membase = (void __iomem *)s.mapbase;
-+
-+ early_serial_setup(&s);
-+}
-+
-+int __init
-+ar231x_add_wmac(int nr, u32 base, int irq)
-+{
-+ struct resource *res;
-+
-+ ar231x_wmac[nr].dev.platform_data = &ar231x_board;
-+ res = &ar231x_wmac[nr].resource[0];
-+ res->start = base;
-+ res->end = base + 0x10000 - 1;
-+ res++;
-+ res->start = irq;
-+ res->end = irq;
-+ return platform_device_register(&ar231x_wmac[nr]);
-+}
-+
-+static int __init ar231x_register_devices(void)
-+{
-+ static struct resource res = {
-+ .start = 0xFFFFFFFF,
-+ };
-+
-+ platform_device_register_simple("GPIODEV", 0, &res, 1);
-+ ar5312_init_devices();
-+ ar2315_init_devices();
-+
-+ return 0;
-+}
-+
-+device_initcall(ar231x_register_devices);
diff --git a/target/linux/atheros/patches-2.6.32/101-early-printk-support.patch b/target/linux/atheros/patches-2.6.32/101-early-printk-support.patch
deleted file mode 100644
index b52471ade9..0000000000
--- a/target/linux/atheros/patches-2.6.32/101-early-printk-support.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- /dev/null
-+++ b/arch/mips/ar231x/early_printk.c
-@@ -0,0 +1,44 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ */
-+
-+#include <linux/mm.h>
-+#include <linux/io.h>
-+#include <linux/serial_reg.h>
-+#include <asm/addrspace.h>
-+
-+#include <asm/mach-ar231x/ar2315_regs.h>
-+#include <asm/mach-ar231x/ar5312_regs.h>
-+#include "devices.h"
-+
-+static inline void prom_uart_wr(void __iomem *base, unsigned reg,
-+ unsigned char ch)
-+{
-+ __raw_writeb(ch, base + 4 * reg);
-+}
-+
-+static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg)
-+{
-+ return __raw_readb(base + 4 * reg);
-+}
-+
-+void prom_putchar(unsigned char ch)
-+{
-+ static void __iomem *base;
-+
-+ if (unlikely(base == NULL)) {
-+ if (is_2315())
-+ base = (void __iomem *)(KSEG1ADDR(AR2315_UART0));
-+ else
-+ base = (void __iomem *)(KSEG1ADDR(AR531X_UART0));
-+ }
-+
-+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
-+ prom_uart_wr(base, UART_TX, ch);
-+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
-+}
-+
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -9,5 +9,8 @@
- #
-
- obj-y += board.o prom.o devices.o
-+
-+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-+
- obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
- obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -106,6 +106,7 @@ config ATHEROS_AR231X
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_32BIT_KERNEL
- select GENERIC_GPIO
-+ select SYS_HAS_EARLY_PRINTK
- help
- Support for AR231x and AR531x based boards
-
diff --git a/target/linux/atheros/patches-2.6.32/105-ar2315_pci.patch b/target/linux/atheros/patches-2.6.32/105-ar2315_pci.patch
deleted file mode 100644
index 3f5e6b4528..0000000000
--- a/target/linux/atheros/patches-2.6.32/105-ar2315_pci.patch
+++ /dev/null
@@ -1,297 +0,0 @@
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -14,3 +14,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin
-
- obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
- obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
-+obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o
---- /dev/null
-+++ b/arch/mips/ar231x/pci.c
-@@ -0,0 +1,230 @@
-+/*
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/spinlock.h>
-+#include <linux/delay.h>
-+#include <linux/irq.h>
-+#include <asm/bootinfo.h>
-+#include <asm/paccess.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/io.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include <ar2315_regs.h>
-+#include "devices.h"
-+
-+#define AR531X_MEM_BASE 0x80800000UL
-+#define AR531X_MEM_SIZE 0x00ffffffUL
-+#define AR531X_IO_SIZE 0x00007fffUL
-+
-+static unsigned long configspace;
-+
-+static int config_access(int devfn, int where, int size, u32 *ptr, bool write)
-+{
-+ unsigned long flags;
-+ int func = PCI_FUNC(devfn);
-+ int dev = PCI_SLOT(devfn);
-+ u32 value = 0;
-+ int err = 0;
-+ u32 addr;
-+
-+ if (((dev != 0) && (dev != 3)) || (func > 2))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ /* Select Configuration access */
-+ local_irq_save(flags);
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, 0, AR2315_PCIMISC_CFG_SEL);
-+ mb();
-+
-+ addr = (u32) configspace + (1 << (13 + dev)) + (func << 8) + where;
-+ if (size == 1)
-+ addr ^= 0x3;
-+ else if (size == 2)
-+ addr ^= 0x2;
-+
-+ if (write) {
-+ value = *ptr;
-+ if (size == 1)
-+ err = put_dbe(value, (u8 *) addr);
-+ else if (size == 2)
-+ err = put_dbe(value, (u16 *) addr);
-+ else if (size == 4)
-+ err = put_dbe(value, (u32 *) addr);
-+ } else {
-+ if (size == 1)
-+ err = get_dbe(value, (u8 *) addr);
-+ else if (size == 2)
-+ err = get_dbe(value, (u16 *) addr);
-+ else if (size == 4)
-+ err = get_dbe(value, (u32 *) addr);
-+ if (err)
-+ *ptr = 0xffffffff;
-+ else
-+ *ptr = value;
-+ }
-+
-+ /* Select Memory access */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_CFG_SEL, 0);
-+ local_irq_restore(flags);
-+
-+ return (err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL);
-+}
-+
-+static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
-+{
-+ return config_access(devfn, where, size, value, 0);
-+}
-+
-+static int ar231x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-+{
-+ return config_access(devfn, where, size, &value, 1);
-+}
-+
-+struct pci_ops ar231x_pci_ops = {
-+ .read = ar231x_pci_read,
-+ .write = ar231x_pci_write,
-+};
-+
-+static struct resource ar231x_mem_resource = {
-+ .name = "AR531x PCI MEM",
-+ .start = AR531X_MEM_BASE,
-+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource ar231x_io_resource = {
-+ .name = "AR531x PCI I/O",
-+ .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
-+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+struct pci_controller ar231x_pci_controller = {
-+ .pci_ops = &ar231x_pci_ops,
-+ .mem_resource = &ar231x_mem_resource,
-+ .io_resource = &ar231x_io_resource,
-+ .mem_offset = 0x00000000UL,
-+ .io_offset = 0x00000000UL,
-+};
-+
-+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return AR2315_IRQ_LCBUS_PCI;
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
-+ pci_write_config_word(dev, 0x40, 0);
-+
-+ /* Clear any pending Abort or external Interrupts
-+ * and enable interrupt processing */
-+ ar231x_mask_reg(AR2315_PCI_INTEN_REG, AR2315_PCI_INT_ENABLE, 0);
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
-+ ar231x_write_reg(AR2315_PCI_INT_MASK, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
-+ ar231x_mask_reg(AR2315_PCI_INTEN_REG, 0, AR2315_PCI_INT_ENABLE);
-+
-+ return 0;
-+}
-+
-+static void
-+ar2315_pci_fixup(struct pci_dev *dev)
-+{
-+ unsigned int devfn = dev->devfn;
-+
-+ if (dev->bus->number != 0)
-+ return;
-+
-+ /* Only fix up the PCI host settings */
-+ if ((PCI_SLOT(devfn) != 3) || (PCI_FUNC(devfn) != 0))
-+ return;
-+
-+ /* Fix up MBARs */
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, HOST_PCI_MBAR0);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, HOST_PCI_MBAR1);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, HOST_PCI_MBAR2);
-+ pci_write_config_dword(dev, PCI_COMMAND,
-+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL |
-+ PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR |
-+ PCI_COMMAND_FAST_BACK);
-+}
-+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar2315_pci_fixup);
-+
-+static int __init
-+ar2315_pci_init(void)
-+{
-+ u32 reg;
-+
-+ if (ar231x_devtype != DEV_TYPE_AR2315)
-+ return -ENODEV;
-+
-+ configspace = (unsigned long) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
-+ ar231x_pci_controller.io_map_base =
-+ (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE);
-+ set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space */
-+
-+ reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
-+ msleep(10);
-+
-+ reg &= ~AR2315_RESET_PCIDMA;
-+ ar231x_write_reg(AR2315_RESET, reg);
-+ msleep(10);
-+
-+ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0,
-+ AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE);
-+
-+ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
-+ (AR2315_PCICLK_IN_FREQ_DIV_6 << AR2315_PCICLK_DIV_S));
-+ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
-+ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | AR2315_IF_MASK,
-+ AR2315_IF_PCI | AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
-+ (AR2315_IF_PCI_CLK_OUTPUT_CLK << AR2315_IF_PCI_CLK_SHIFT));
-+
-+ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
-+ AR2315_PCIRST_LOW);
-+ msleep(100);
-+
-+ /* Bring the PCI out of reset */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
-+ AR2315_PCIRST_HIGH | AR2315_PCICACHE_DIS | 0x8);
-+
-+ ar231x_write_reg(AR2315_PCI_UNCACHE_CFG,
-+ 0x1E | /* 1GB uncached */
-+ (1 << 5) | /* Enable uncached */
-+ (0x2 << 30) /* Base: 0x80000000 */
-+ );
-+ ar231x_read_reg(AR2315_PCI_UNCACHE_CFG);
-+
-+ msleep(500);
-+
-+ /* dirty hack - anyone with a datasheet that knows the memory map ? */
-+ ioport_resource.start = 0x10000000;
-+ ioport_resource.end = 0xffffffff;
-+ iomem_resource.start = 0x10000000;
-+ iomem_resource.end = 0xffffffff;
-+
-+ register_pci_controller(&ar231x_pci_controller);
-+
-+ return 0;
-+}
-+
-+arch_initcall(ar2315_pci_init);
---- a/arch/mips/ar231x/Kconfig
-+++ b/arch/mips/ar231x/Kconfig
-@@ -15,3 +15,13 @@ config ATHEROS_AR2315
- select SYS_SUPPORTS_BIG_ENDIAN
- select GENERIC_GPIO
- default y
-+
-+config ATHEROS_AR2315_PCI
-+ bool "PCI support"
-+ depends on ATHEROS_AR2315
-+ select HW_HAS_PCI
-+ select PCI
-+ select USB_ARCH_HAS_HCD
-+ select USB_ARCH_HAS_OHCI
-+ select USB_ARCH_HAS_EHCI
-+ default y
---- a/arch/mips/ar231x/ar2315.c
-+++ b/arch/mips/ar231x/ar2315.c
-@@ -63,6 +63,27 @@ static inline void ar2315_gpio_irq(void)
- do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
- }
-
-+#ifdef CONFIG_ATHEROS_AR2315_PCI
-+static inline void pci_abort_irq(void)
-+{
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_ABORT_INT);
-+}
-+
-+static inline void pci_ack_irq(void)
-+{
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_EXT_INT);
-+}
-+
-+void ar2315_pci_irq(int irq)
-+{
-+ if (ar231x_read_reg(AR2315_PCI_INT_STATUS) == AR2315_PCI_ABORT_INT)
-+ pci_abort_irq();
-+ else {
-+ do_IRQ(irq);
-+ pci_ack_irq();
-+ }
-+}
-+#endif /* CONFIG_ATHEROS_AR2315_PCI */
-
- /*
- * Called when an interrupt is received, this function
-@@ -81,6 +102,10 @@ ar2315_irq_dispatch(void)
- do_IRQ(AR2315_IRQ_WLAN0_INTRS);
- else if (pending & CAUSEF_IP4)
- do_IRQ(AR2315_IRQ_ENET0_INTRS);
-+#ifdef CONFIG_ATHEROS_AR2315_PCI
-+ else if (pending & CAUSEF_IP5)
-+ ar2315_pci_irq(AR2315_IRQ_LCBUS_PCI);
-+#endif
- else if (pending & CAUSEF_IP2) {
- unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
-
diff --git a/target/linux/atheros/patches-2.6.32/110-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.32/110-ar2313_ethernet.patch
deleted file mode 100644
index 22fadd05fd..0000000000
--- a/target/linux/atheros/patches-2.6.32/110-ar2313_ethernet.patch
+++ /dev/null
@@ -1,1611 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -359,6 +359,12 @@ config AX88796_93CX6
- help
- Select this if your platform comes with an external 93CX6 eeprom.
-
-+config AR231X_ETHERNET
-+ tristate "AR231x Ethernet support"
-+ depends on ATHEROS_AR231X
-+ help
-+ Support for the AR231x/531x ethernet controller
-+
- config MACE
- tristate "MACE (Power Mac ethernet) support"
- depends on PPC_PMAC && PPC32
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -216,6 +216,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
- obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
-+obj-$(CONFIG_AR231X_ETHERNET) += ar231x.o
- obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
- obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
- obj-$(CONFIG_DECLANCE) += declance.o
---- /dev/null
-+++ b/drivers/net/ar231x.c
-@@ -0,0 +1,1278 @@
-+/*
-+ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Additional credits:
-+ * This code is taken from John Taylor's Sibyte driver and then
-+ * modified for the AR2313.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+#include <linux/sockios.h>
-+#include <linux/pkt_sched.h>
-+#include <linux/mii.h>
-+#include <linux/phy.h>
-+#include <linux/ethtool.h>
-+#include <linux/ctype.h>
-+#include <linux/platform_device.h>
-+
-+#include <net/sock.h>
-+#include <net/ip.h>
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/byteorder.h>
-+#include <asm/uaccess.h>
-+#include <asm/bootinfo.h>
-+
-+#define AR2313_MTU 1692
-+#define AR2313_PRIOS 1
-+#define AR2313_QUEUES (2*AR2313_PRIOS)
-+#define AR2313_DESCR_ENTRIES 64
-+
-+
-+#ifndef min
-+#define min(a,b) (((a)<(b))?(a):(b))
-+#endif
-+
-+#ifndef SMP_CACHE_BYTES
-+#define SMP_CACHE_BYTES L1_CACHE_BYTES
-+#endif
-+
-+#define AR2313_MBOX_SET_BIT 0x8
-+
-+#include "ar231x.h"
-+
-+/*
-+ * New interrupt handler strategy:
-+ *
-+ * An old interrupt handler worked using the traditional method of
-+ * replacing an skbuff with a new one when a packet arrives. However
-+ * the rx rings do not need to contain a static number of buffer
-+ * descriptors, thus it makes sense to move the memory allocation out
-+ * of the main interrupt handler and do it in a bottom half handler
-+ * and only allocate new buffers when the number of buffers in the
-+ * ring is below a certain threshold. In order to avoid starving the
-+ * NIC under heavy load it is however necessary to force allocation
-+ * when hitting a minimum threshold. The strategy for alloction is as
-+ * follows:
-+ *
-+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
-+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
-+ * the buffers in the interrupt handler
-+ * RX_RING_THRES - maximum number of buffers in the rx ring
-+ *
-+ * One advantagous side effect of this allocation approach is that the
-+ * entire rx processing can be done without holding any spin lock
-+ * since the rx rings and registers are totally independent of the tx
-+ * ring and its registers. This of course includes the kmalloc's of
-+ * new skb's. Thus start_xmit can run in parallel with rx processing
-+ * and the memory allocation on SMP systems.
-+ *
-+ * Note that running the skb reallocation in a bottom half opens up
-+ * another can of races which needs to be handled properly. In
-+ * particular it can happen that the interrupt handler tries to run
-+ * the reallocation while the bottom half is either running on another
-+ * CPU or was interrupted on the same CPU. To get around this the
-+ * driver uses bitops to prevent the reallocation routines from being
-+ * reentered.
-+ *
-+ * TX handling can also be done without holding any spin lock, wheee
-+ * this is fun! since tx_csm is only written to by the interrupt
-+ * handler.
-+ */
-+
-+/*
-+ * Threshold values for RX buffer allocation - the low water marks for
-+ * when to start refilling the rings are set to 75% of the ring
-+ * sizes. It seems to make sense to refill the rings entirely from the
-+ * intrrupt handler once it gets below the panic threshold, that way
-+ * we don't risk that the refilling is moved to another CPU when the
-+ * one running the interrupt handler just got the slab code hot in its
-+ * cache.
-+ */
-+#define RX_RING_SIZE AR2313_DESCR_ENTRIES
-+#define RX_PANIC_THRES (RX_RING_SIZE/4)
-+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
-+#define CRC_LEN 4
-+#define RX_OFFSET 2
-+
-+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-+#define VLAN_HDR 4
-+#else
-+#define VLAN_HDR 0
-+#endif
-+
-+#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
-+
-+#ifdef MODULE
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
-+MODULE_DESCRIPTION("AR231x Ethernet driver");
-+#endif
-+
-+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-+
-+// prototypes
-+static void ar231x_halt(struct net_device *dev);
-+static void rx_tasklet_func(unsigned long data);
-+static void rx_tasklet_cleanup(struct net_device *dev);
-+static void ar231x_multicast_list(struct net_device *dev);
-+static void ar231x_tx_timeout(struct net_device *dev);
-+
-+static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
-+static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
-+static int ar231x_mdiobus_reset(struct mii_bus *bus);
-+static int ar231x_mdiobus_probe (struct net_device *dev);
-+static void ar231x_adjust_link(struct net_device *dev);
-+
-+#ifndef ERR
-+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-+#endif
-+
-+static const struct net_device_ops ar231x_ops = {
-+ .ndo_open = ar231x_open,
-+ .ndo_stop = ar231x_close,
-+ .ndo_start_xmit = ar231x_start_xmit,
-+ .ndo_set_multicast_list = ar231x_multicast_list,
-+ .ndo_do_ioctl = ar231x_ioctl,
-+ .ndo_change_mtu = eth_change_mtu,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_set_mac_address = eth_mac_addr,
-+ .ndo_tx_timeout = ar231x_tx_timeout,
-+};
-+
-+int __init ar231x_probe(struct platform_device *pdev)
-+{
-+ struct net_device *dev;
-+ struct ar231x_private *sp;
-+ struct resource *res;
-+ unsigned long ar_eth_base;
-+ char buf[64];
-+
-+ dev = alloc_etherdev(sizeof(struct ar231x_private));
-+
-+ if (dev == NULL) {
-+ printk(KERN_ERR
-+ "ar231x: Unable to allocate net_device structure!\n");
-+ return -ENOMEM;
-+ }
-+
-+ platform_set_drvdata(pdev, dev);
-+
-+ sp = netdev_priv(dev);
-+ sp->dev = dev;
-+ sp->cfg = pdev->dev.platform_data;
-+
-+ sprintf(buf, "eth%d_membase", pdev->id);
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
-+ if (!res)
-+ return -ENODEV;
-+
-+ sp->link = 0;
-+ ar_eth_base = res->start;
-+
-+ sprintf(buf, "eth%d_irq", pdev->id);
-+ dev->irq = platform_get_irq_byname(pdev, buf);
-+
-+ spin_lock_init(&sp->lock);
-+
-+ dev->features |= NETIF_F_HIGHDMA;
-+ dev->netdev_ops = &ar231x_ops;
-+
-+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ sp->eth_regs =
-+ ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
-+ if (!sp->eth_regs) {
-+ printk("Can't remap eth registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ /*
-+ * When there's only one MAC, PHY regs are typically on ENET0,
-+ * even though the MAC might be on ENET1.
-+ * Needto remap PHY regs separately in this case
-+ */
-+ if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
-+ sp->phy_regs = sp->eth_regs;
-+ else {
-+ sp->phy_regs =
-+ ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
-+ sizeof(*sp->phy_regs));
-+ if (!sp->phy_regs) {
-+ printk("Can't remap phy registers\n");
-+ return (-ENXIO);
-+ }
-+ }
-+
-+ sp->dma_regs =
-+ ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
-+ sizeof(*sp->dma_regs));
-+ dev->base_addr = (unsigned int) sp->dma_regs;
-+ if (!sp->dma_regs) {
-+ printk("Can't remap DMA registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
-+ if (!sp->int_regs) {
-+ printk("Can't remap INTERRUPT registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
-+ sp->name[sizeof(sp->name) - 1] = '\0';
-+ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
-+
-+ if (ar231x_init(dev)) {
-+ /*
-+ * ar231x_init() calls ar231x_init_cleanup() on error.
-+ */
-+ kfree(dev);
-+ return -ENODEV;
-+ }
-+
-+ if (register_netdev(dev)) {
-+ printk("%s: register_netdev failed\n", __func__);
-+ return -1;
-+ }
-+
-+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
-+ dev->name, sp->name,
-+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
-+
-+ sp->mii_bus = mdiobus_alloc();
-+ if (sp->mii_bus == NULL)
-+ return -1;
-+
-+ sp->mii_bus->priv = dev;
-+ sp->mii_bus->read = ar231x_mdiobus_read;
-+ sp->mii_bus->write = ar231x_mdiobus_write;
-+ sp->mii_bus->reset = ar231x_mdiobus_reset;
-+ sp->mii_bus->name = "ar231x_eth_mii";
-+ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
-+ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
-+ *sp->mii_bus->irq = PHY_POLL;
-+
-+ mdiobus_register(sp->mii_bus);
-+
-+ if (ar231x_mdiobus_probe(dev) != 0) {
-+ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
-+ rx_tasklet_cleanup(dev);
-+ ar231x_init_cleanup(dev);
-+ unregister_netdev(dev);
-+ kfree(dev);
-+ return -ENODEV;
-+ }
-+
-+ /* start link poll timer */
-+ ar231x_setup_timer(dev);
-+
-+ return 0;
-+}
-+
-+
-+static void ar231x_multicast_list(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int filter;
-+
-+ filter = sp->eth_regs->mac_control;
-+
-+ if (dev->flags & IFF_PROMISC)
-+ filter |= MAC_CONTROL_PR;
-+ else
-+ filter &= ~MAC_CONTROL_PR;
-+ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0))
-+ filter |= MAC_CONTROL_PM;
-+ else
-+ filter &= ~MAC_CONTROL_PM;
-+
-+ sp->eth_regs->mac_control = filter;
-+}
-+
-+static void rx_tasklet_cleanup(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ /*
-+ * Tasklet may be scheduled. Need to get it removed from the list
-+ * since we're about to free the struct.
-+ */
-+
-+ sp->unloading = 1;
-+ tasklet_enable(&sp->rx_tasklet);
-+ tasklet_kill(&sp->rx_tasklet);
-+}
-+
-+static int __devexit ar231x_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ rx_tasklet_cleanup(dev);
-+ ar231x_init_cleanup(dev);
-+ unregister_netdev(dev);
-+ mdiobus_unregister(sp->mii_bus);
-+ mdiobus_free(sp->mii_bus);
-+ kfree(dev);
-+ return 0;
-+}
-+
-+
-+/*
-+ * Restart the AR2313 ethernet controller.
-+ */
-+static int ar231x_restart(struct net_device *dev)
-+{
-+ /* disable interrupts */
-+ disable_irq(dev->irq);
-+
-+ /* stop mac */
-+ ar231x_halt(dev);
-+
-+ /* initialize */
-+ ar231x_init(dev);
-+
-+ /* enable interrupts */
-+ enable_irq(dev->irq);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ar231x_driver = {
-+ .driver.name = "ar231x-eth",
-+ .probe = ar231x_probe,
-+ .remove = __devexit_p(ar231x_remove),
-+};
-+
-+int __init ar231x_module_init(void)
-+{
-+ return platform_driver_register(&ar231x_driver);
-+}
-+
-+void __exit ar231x_module_cleanup(void)
-+{
-+ platform_driver_unregister(&ar231x_driver);
-+}
-+
-+module_init(ar231x_module_init);
-+module_exit(ar231x_module_cleanup);
-+
-+
-+static void ar231x_free_descriptors(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ if (sp->rx_ring != NULL) {
-+ kfree((void *) KSEG0ADDR(sp->rx_ring));
-+ sp->rx_ring = NULL;
-+ sp->tx_ring = NULL;
-+ }
-+}
-+
-+
-+static int ar231x_allocate_descriptors(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int size;
-+ int j;
-+ ar231x_descr_t *space;
-+
-+ if (sp->rx_ring != NULL) {
-+ printk("%s: already done.\n", __FUNCTION__);
-+ return 0;
-+ }
-+
-+ size =
-+ (sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
-+ space = kmalloc(size, GFP_KERNEL);
-+ if (space == NULL)
-+ return 1;
-+
-+ /* invalidate caches */
-+ dma_cache_inv((unsigned int) space, size);
-+
-+ /* now convert pointer to KSEG1 */
-+ space = (ar231x_descr_t *) KSEG1ADDR(space);
-+
-+ memset((void *) space, 0, size);
-+
-+ sp->rx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ sp->tx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ /* Initialize the transmit Descriptors */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ ar231x_descr_t *td = &sp->tx_ring[j];
-+ td->status = 0;
-+ td->devcs = DMA_TX1_CHAINED;
-+ td->addr = 0;
-+ td->descr =
-+ virt_to_phys(&sp->
-+ tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * Generic cleanup handling data allocated during init. Used when the
-+ * module is unloaded or if an error occurs during initialization
-+ */
-+static void ar231x_init_cleanup(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ struct sk_buff *skb;
-+ int j;
-+
-+ ar231x_free_descriptors(dev);
-+
-+ if (sp->eth_regs)
-+ iounmap((void *) sp->eth_regs);
-+ if (sp->dma_regs)
-+ iounmap((void *) sp->dma_regs);
-+
-+ if (sp->rx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->rx_skb[j];
-+ if (skb) {
-+ sp->rx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->rx_skb);
-+ sp->rx_skb = NULL;
-+ }
-+
-+ if (sp->tx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ sp->tx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->tx_skb);
-+ sp->tx_skb = NULL;
-+ }
-+}
-+
-+static int ar231x_setup_timer(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ init_timer(&sp->link_timer);
-+
-+ sp->link_timer.function = ar231x_link_timer_fn;
-+ sp->link_timer.data = (int) dev;
-+ sp->link_timer.expires = jiffies + HZ;
-+
-+ add_timer(&sp->link_timer);
-+ return 0;
-+
-+}
-+
-+static void ar231x_link_timer_fn(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ // see if the link status changed
-+ // This was needed to make sure we set the PHY to the
-+ // autonegotiated value of half or full duplex.
-+ ar231x_check_link(dev);
-+
-+ // Loop faster when we don't have link.
-+ // This was needed to speed up the AP bootstrap time.
-+ if (sp->link == 0) {
-+ mod_timer(&sp->link_timer, jiffies + HZ / 2);
-+ } else {
-+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
-+ }
-+}
-+
-+static void ar231x_check_link(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ u16 phyData;
-+
-+ phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
-+ if (sp->phyData != phyData) {
-+ if (phyData & BMSR_LSTATUS) {
-+ /* link is present, ready link partner ability to deterine
-+ duplexity */
-+ int duplex = 0;
-+ u16 reg;
-+
-+ sp->link = 1;
-+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
-+ if (reg & BMCR_ANENABLE) {
-+ /* auto neg enabled */
-+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
-+ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
-+ } else {
-+ /* no auto neg, just read duplex config */
-+ duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
-+ }
-+
-+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
-+ dev->name, (duplex) ? "full" : "half");
-+
-+ if (duplex) {
-+ /* full duplex */
-+ sp->eth_regs->mac_control =
-+ ((sp->eth_regs->
-+ mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
-+ } else {
-+ /* half duplex */
-+ sp->eth_regs->mac_control =
-+ ((sp->eth_regs->
-+ mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
-+ }
-+ } else {
-+ /* no link */
-+ sp->link = 0;
-+ }
-+ sp->phyData = phyData;
-+ }
-+}
-+
-+static int ar231x_reset_reg(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int ethsal, ethsah;
-+ unsigned int flags;
-+
-+ *sp->int_regs |= sp->cfg->reset_mac;
-+ mdelay(10);
-+ *sp->int_regs &= ~sp->cfg->reset_mac;
-+ mdelay(10);
-+ *sp->int_regs |= sp->cfg->reset_phy;
-+ mdelay(10);
-+ *sp->int_regs &= ~sp->cfg->reset_phy;
-+ mdelay(10);
-+
-+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
-+ mdelay(10);
-+ sp->dma_regs->bus_mode =
-+ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-+
-+ /* enable interrupts */
-+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
-+ DMA_STATUS_NIS |
-+ DMA_STATUS_RI |
-+ DMA_STATUS_TI | DMA_STATUS_FBE);
-+ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
-+ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
-+ sp->dma_regs->control =
-+ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-+
-+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
-+ sp->eth_regs->vlan_tag = (0x8100);
-+
-+ /* Enable Ethernet Interface */
-+ flags = (MAC_CONTROL_TE | /* transmit enable */
-+ MAC_CONTROL_PM | /* pass mcast */
-+ MAC_CONTROL_F | /* full duplex */
-+ MAC_CONTROL_HBD); /* heart beat disabled */
-+
-+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
-+ flags |= MAC_CONTROL_PR;
-+ }
-+ sp->eth_regs->mac_control = flags;
-+
-+ /* Set all Ethernet station address registers to their initial values */
-+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-+
-+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-+
-+ sp->eth_regs->mac_addr[0] = ethsah;
-+ sp->eth_regs->mac_addr[1] = ethsal;
-+
-+ mdelay(10);
-+
-+ return (0);
-+}
-+
-+
-+static int ar231x_init(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int ecode = 0;
-+
-+ /*
-+ * Allocate descriptors
-+ */
-+ if (ar231x_allocate_descriptors(dev)) {
-+ printk("%s: %s: ar231x_allocate_descriptors failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+
-+ /*
-+ * Get the memory for the skb rings.
-+ */
-+ if (sp->rx_skb == NULL) {
-+ sp->rx_skb =
-+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+ GFP_KERNEL);
-+ if (!(sp->rx_skb)) {
-+ printk("%s: %s: rx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ if (sp->tx_skb == NULL) {
-+ sp->tx_skb =
-+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+ GFP_KERNEL);
-+ if (!(sp->tx_skb)) {
-+ printk("%s: %s: tx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ /*
-+ * Set tx_csm before we start receiving interrupts, otherwise
-+ * the interrupt handler might think it is supposed to process
-+ * tx ints before we are up and running, which may cause a null
-+ * pointer access in the int handler.
-+ */
-+ sp->rx_skbprd = 0;
-+ sp->cur_rx = 0;
-+ sp->tx_prd = 0;
-+ sp->tx_csm = 0;
-+
-+ /*
-+ * Zero the stats before starting the interface
-+ */
-+ memset(&dev->stats, 0, sizeof(dev->stats));
-+
-+ /*
-+ * We load the ring here as there seem to be no way to tell the
-+ * firmware to wipe the ring without re-initializing it.
-+ */
-+ ar231x_load_rx_ring(dev, RX_RING_SIZE);
-+
-+ /*
-+ * Init hardware
-+ */
-+ ar231x_reset_reg(dev);
-+
-+ /*
-+ * Get the IRQ
-+ */
-+ ecode =
-+ request_irq(dev->irq, &ar231x_interrupt,
-+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-+ dev->name, dev);
-+ if (ecode) {
-+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
-+ dev->name, __FUNCTION__, dev->irq);
-+ goto init_error;
-+ }
-+
-+
-+ tasklet_enable(&sp->rx_tasklet);
-+
-+ return 0;
-+
-+ init_error:
-+ ar231x_init_cleanup(dev);
-+ return ecode;
-+}
-+
-+/*
-+ * Load the rx ring.
-+ *
-+ * Loading rings is safe without holding the spin lock since this is
-+ * done only before the device is enabled, thus no interrupts are
-+ * generated and by the interrupt handler/tasklet handler.
-+ */
-+static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
-+{
-+
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ short i, idx;
-+
-+ idx = sp->rx_skbprd;
-+
-+ for (i = 0; i < nr_bufs; i++) {
-+ struct sk_buff *skb;
-+ ar231x_descr_t *rd;
-+
-+ if (sp->rx_skb[idx])
-+ break;
-+
-+ skb = netdev_alloc_skb(dev, AR2313_BUFSIZE);
-+ if (!skb) {
-+ printk("\n\n\n\n %s: No memory in system\n\n\n\n",
-+ __FUNCTION__);
-+ break;
-+ }
-+
-+ /*
-+ * Make sure IP header starts on a fresh cache line.
-+ */
-+ skb->dev = dev;
-+ skb_reserve(skb, RX_OFFSET);
-+ sp->rx_skb[idx] = skb;
-+
-+ rd = (ar231x_descr_t *) & sp->rx_ring[idx];
-+
-+ /* initialize dma descriptor */
-+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rd->addr = virt_to_phys(skb->data);
-+ rd->descr =
-+ virt_to_phys(&sp->
-+ rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-+ rd->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ if (i)
-+ sp->rx_skbprd = idx;
-+
-+ return;
-+}
-+
-+#define AR2313_MAX_PKTS_PER_CALL 64
-+
-+static int ar231x_rx_int(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ struct sk_buff *skb, *skb_new;
-+ ar231x_descr_t *rxdesc;
-+ unsigned int status;
-+ u32 idx;
-+ int pkts = 0;
-+ int rval;
-+
-+ idx = sp->cur_rx;
-+
-+ /* process at most the entire ring and then wait for another interrupt
-+ */
-+ while (1) {
-+
-+ rxdesc = &sp->rx_ring[idx];
-+ status = rxdesc->status;
-+ if (status & DMA_RX_OWN) {
-+ /* SiByte owns descriptor or descr not yet filled in */
-+ rval = 0;
-+ break;
-+ }
-+
-+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
-+ rval = 1;
-+ break;
-+ }
-+
-+ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
-+ dev->stats.rx_errors++;
-+ dev->stats.rx_dropped++;
-+
-+ /* add statistics counters */
-+ if (status & DMA_RX_ERR_CRC)
-+ dev->stats.rx_crc_errors++;
-+ if (status & DMA_RX_ERR_COL)
-+ dev->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_LENGTH)
-+ dev->stats.rx_length_errors++;
-+ if (status & DMA_RX_ERR_RUNT)
-+ dev->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_DESC)
-+ dev->stats.rx_over_errors++;
-+
-+ } else {
-+ /* alloc new buffer. */
-+ skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
-+ if (skb_new != NULL) {
-+
-+ skb = sp->rx_skb[idx];
-+ /* set skb */
-+ skb_put(skb,
-+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
-+
-+ dev->stats.rx_bytes += skb->len;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ /* pass the packet to upper layers */
-+ netif_rx(skb);
-+
-+ skb_new->dev = dev;
-+ /* 16 bit align */
-+ skb_reserve(skb_new, RX_OFFSET);
-+ /* reset descriptor's curr_addr */
-+ rxdesc->addr = virt_to_phys(skb_new->data);
-+
-+ dev->stats.rx_packets++;
-+ sp->rx_skb[idx] = skb_new;
-+ } else {
-+ dev->stats.rx_dropped++;
-+ }
-+ }
-+
-+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rxdesc->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ sp->cur_rx = idx;
-+
-+ return rval;
-+}
-+
-+
-+static void ar231x_tx_int(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ u32 idx;
-+ struct sk_buff *skb;
-+ ar231x_descr_t *txdesc;
-+ unsigned int status = 0;
-+
-+ idx = sp->tx_csm;
-+
-+ while (idx != sp->tx_prd) {
-+ txdesc = &sp->tx_ring[idx];
-+
-+ if ((status = txdesc->status) & DMA_TX_OWN) {
-+ /* ar231x dma still owns descr */
-+ break;
-+ }
-+ /* done with this descriptor */
-+ dma_unmap_single(NULL, txdesc->addr,
-+ txdesc->devcs & DMA_TX1_BSIZE_MASK,
-+ DMA_TO_DEVICE);
-+ txdesc->status = 0;
-+
-+ if (status & DMA_TX_ERROR) {
-+ dev->stats.tx_errors++;
-+ dev->stats.tx_dropped++;
-+ if (status & DMA_TX_ERR_UNDER)
-+ dev->stats.tx_fifo_errors++;
-+ if (status & DMA_TX_ERR_HB)
-+ dev->stats.tx_heartbeat_errors++;
-+ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
-+ dev->stats.tx_carrier_errors++;
-+ if (status & (DMA_TX_ERR_LATE |
-+ DMA_TX_ERR_COL |
-+ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
-+ dev->stats.tx_aborted_errors++;
-+ } else {
-+ /* transmit OK */
-+ dev->stats.tx_packets++;
-+ }
-+
-+ skb = sp->tx_skb[idx];
-+ sp->tx_skb[idx] = NULL;
-+ idx = DSC_NEXT(idx);
-+ dev->stats.tx_bytes += skb->len;
-+ dev_kfree_skb_irq(skb);
-+ }
-+
-+ sp->tx_csm = idx;
-+
-+ return;
-+}
-+
-+
-+static void rx_tasklet_func(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ if (sp->unloading) {
-+ return;
-+ }
-+
-+ if (ar231x_rx_int(dev)) {
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+ } else {
-+ unsigned long flags;
-+ spin_lock_irqsave(&sp->lock, flags);
-+ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+ }
-+}
-+
-+static void rx_schedule(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-+
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+}
-+
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int status, enabled;
-+
-+ /* clear interrupt */
-+ /*
-+ * Don't clear RI bit if currently disabled.
-+ */
-+ status = sp->dma_regs->status;
-+ enabled = sp->dma_regs->intr_ena;
-+ sp->dma_regs->status = status & enabled;
-+
-+ if (status & DMA_STATUS_NIS) {
-+ /* normal status */
-+ /*
-+ * Don't schedule rx processing if interrupt
-+ * is already disabled.
-+ */
-+ if (status & enabled & DMA_STATUS_RI) {
-+ /* receive interrupt */
-+ rx_schedule(dev);
-+ }
-+ if (status & DMA_STATUS_TI) {
-+ /* transmit interrupt */
-+ ar231x_tx_int(dev);
-+ }
-+ }
-+
-+ /* abnormal status */
-+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
-+ ar231x_restart(dev);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int ar231x_open(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int ethsal, ethsah;
-+
-+ /* reset the hardware, in case the MAC address changed */
-+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-+
-+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-+
-+ sp->eth_regs->mac_addr[0] = ethsah;
-+ sp->eth_regs->mac_addr[1] = ethsal;
-+
-+ mdelay(10);
-+
-+ dev->mtu = 1500;
-+ netif_start_queue(dev);
-+
-+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-+
-+ return 0;
-+}
-+
-+static void ar231x_tx_timeout(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&sp->lock, flags);
-+ ar231x_restart(dev);
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+}
-+
-+static void ar231x_halt(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int j;
-+
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ /* kill the MAC */
-+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
-+ MAC_CONTROL_TE); /* disable Transmits */
-+ /* stop dma */
-+ sp->dma_regs->control = 0;
-+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-+
-+ /* place phy and MAC in reset */
-+ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
-+
-+ /* free buffers on tx ring */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ struct sk_buff *skb;
-+ ar231x_descr_t *txdesc;
-+
-+ txdesc = &sp->tx_ring[j];
-+ txdesc->descr = 0;
-+
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ dev_kfree_skb(skb);
-+ sp->tx_skb[j] = NULL;
-+ }
-+ }
-+}
-+
-+/*
-+ * close should do nothing. Here's why. It's called when
-+ * 'ifconfig bond0 down' is run. If it calls free_irq then
-+ * the irq is gone forever ! When bond0 is made 'up' again,
-+ * the ar231x_open () does not call request_irq (). Worse,
-+ * the call to ar231x_halt() generates a WDOG reset due to
-+ * the write to 'sp->int_regs' and the box reboots.
-+ * Commenting this out is good since it allows the
-+ * system to resume when bond0 is made up again.
-+ */
-+static int ar231x_close(struct net_device *dev)
-+{
-+#if 0
-+ /*
-+ * Disable interrupts
-+ */
-+ disable_irq(dev->irq);
-+
-+ /*
-+ * Without (or before) releasing irq and stopping hardware, this
-+ * is an absolute non-sense, by the way. It will be reset instantly
-+ * by the first irq.
-+ */
-+ netif_stop_queue(dev);
-+
-+ /* stop the MAC and DMA engines */
-+ ar231x_halt(dev);
-+
-+ /* release the interrupt */
-+ free_irq(dev->irq, dev);
-+
-+#endif
-+ return 0;
-+}
-+
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ ar231x_descr_t *td;
-+ u32 idx;
-+
-+ idx = sp->tx_prd;
-+ td = &sp->tx_ring[idx];
-+
-+ if (td->status & DMA_TX_OWN) {
-+ /* free skbuf and lie to the caller that we sent it out */
-+ dev->stats.tx_dropped++;
-+ dev_kfree_skb(skb);
-+
-+ /* restart transmitter in case locked */
-+ sp->dma_regs->xmt_poll = 0;
-+ return 0;
-+ }
-+
-+ /* Setup the transmit descriptor. */
-+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
-+ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
-+ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+ td->status = DMA_TX_OWN;
-+
-+ /* kick transmitter last */
-+ sp->dma_regs->xmt_poll = 0;
-+
-+ sp->tx_skb[idx] = skb;
-+ idx = DSC_NEXT(idx);
-+ sp->tx_prd = idx;
-+
-+ return 0;
-+}
-+
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int ret;
-+
-+ switch (cmd) {
-+
-+ case SIOCETHTOOL:
-+ spin_lock_irq(&sp->lock);
-+ ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
-+ spin_unlock_irq(&sp->lock);
-+ return ret;
-+
-+ case SIOCSIFHWADDR:
-+ if (copy_from_user
-+ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case SIOCGIFHWADDR:
-+ if (copy_to_user
-+ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case SIOCGMIIPHY:
-+ case SIOCGMIIREG:
-+ case SIOCSMIIREG:
-+ return phy_mii_ioctl(sp->phy_dev, data, cmd);
-+
-+ default:
-+ break;
-+ }
-+
-+ return -EOPNOTSUPP;
-+}
-+
-+static void ar231x_adjust_link(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int mc;
-+
-+ if (!sp->phy_dev->link)
-+ return;
-+
-+ if (sp->phy_dev->duplex != sp->oldduplex) {
-+ mc = readl(&sp->eth_regs->mac_control);
-+ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
-+ if (sp->phy_dev->duplex)
-+ mc |= MAC_CONTROL_F;
-+ else
-+ mc |= MAC_CONTROL_DRO;
-+ writel(mc, &sp->eth_regs->mac_control);
-+ sp->oldduplex = sp->phy_dev->duplex;
-+ }
-+}
-+
-+#define MII_ADDR(phy, reg) \
-+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
-+
-+static int
-+ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
-+{
-+ struct net_device *const dev = bus->priv;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-+
-+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ return (ethernet->mii_data >> MII_DATA_SHIFT);
-+}
-+
-+static int
-+ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
-+ u16 value)
-+{
-+ struct net_device *const dev = bus->priv;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-+
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ ethernet->mii_data = value << MII_DATA_SHIFT;
-+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
-+
-+ return 0;
-+}
-+
-+static int ar231x_mdiobus_reset(struct mii_bus *bus)
-+{
-+ struct net_device *const dev = bus->priv;
-+
-+ ar231x_reset_reg(dev);
-+
-+ return 0;
-+}
-+
-+static int ar231x_mdiobus_probe (struct net_device *dev)
-+{
-+ struct ar231x_private *const sp = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ int phy_addr;
-+
-+ /* find the first (lowest address) PHY on the current MAC's MII bus */
-+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
-+ if (sp->mii_bus->phy_map[phy_addr]) {
-+ phydev = sp->mii_bus->phy_map[phy_addr];
-+ sp->phy = phy_addr;
-+ break; /* break out with first one found */
-+ }
-+
-+ if (!phydev) {
-+ printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
-+ return -1;
-+ }
-+
-+ /* now we are supposed to have a proper phydev, to attach to... */
-+ BUG_ON(!phydev);
-+ BUG_ON(phydev->attached_dev);
-+
-+ phydev = phy_connect(dev, dev_name(&phydev->dev), &ar231x_adjust_link, 0,
-+ PHY_INTERFACE_MODE_MII);
-+
-+ if (IS_ERR(phydev)) {
-+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+ return PTR_ERR(phydev);
-+ }
-+
-+ /* mask with MAC supported features */
-+ phydev->supported &= (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_Autoneg
-+ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
-+
-+ phydev->advertising = phydev->supported;
-+
-+ sp->oldduplex = -1;
-+ sp->phy_dev = phydev;
-+
-+ printk(KERN_INFO "%s: attached PHY driver [%s] "
-+ "(mii_bus:phy_addr=%s)\n",
-+ dev->name, phydev->drv->name, dev_name(&phydev->dev));
-+
-+ return 0;
-+}
-+
---- /dev/null
-+++ b/drivers/net/ar231x.h
-@@ -0,0 +1,302 @@
-+/*
-+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef _AR2313_H_
-+#define _AR2313_H_
-+
-+#include <linux/autoconf.h>
-+#include <linux/bitops.h>
-+#include <asm/bootinfo.h>
-+#include <ar231x_platform.h>
-+
-+/*
-+ * probe link timer - 5 secs
-+ */
-+#define LINK_TIMER (5*HZ)
-+
-+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
-+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
-+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
-+
-+#define AR2313_TX_TIMEOUT (HZ/4)
-+
-+/*
-+ * Rings
-+ */
-+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
-+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
-+
-+#define AR2313_MBGET 2
-+#define AR2313_MBSET 3
-+#define AR2313_PCI_RECONFIG 4
-+#define AR2313_PCI_DUMP 5
-+#define AR2313_TEST_PANIC 6
-+#define AR2313_TEST_NULLPTR 7
-+#define AR2313_READ_DATA 8
-+#define AR2313_WRITE_DATA 9
-+#define AR2313_GET_VERSION 10
-+#define AR2313_TEST_HANG 11
-+#define AR2313_SYNC 12
-+
-+#define DMA_RX_ERR_CRC BIT(1)
-+#define DMA_RX_ERR_DRIB BIT(2)
-+#define DMA_RX_ERR_MII BIT(3)
-+#define DMA_RX_EV2 BIT(5)
-+#define DMA_RX_ERR_COL BIT(6)
-+#define DMA_RX_LONG BIT(7)
-+#define DMA_RX_LS BIT(8) /* last descriptor */
-+#define DMA_RX_FS BIT(9) /* first descriptor */
-+#define DMA_RX_MF BIT(10) /* multicast frame */
-+#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */
-+#define DMA_RX_ERR_LENGTH BIT(12) /* length error */
-+#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */
-+#define DMA_RX_ERROR BIT(15) /* error summary */
-+#define DMA_RX_LEN_MASK 0x3fff0000
-+#define DMA_RX_LEN_SHIFT 16
-+#define DMA_RX_FILT BIT(30)
-+#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */
-+
-+#define DMA_RX1_BSIZE_MASK 0x000007ff
-+#define DMA_RX1_BSIZE_SHIFT 0
-+#define DMA_RX1_CHAINED BIT(24)
-+#define DMA_RX1_RER BIT(25)
-+
-+#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */
-+#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */
-+#define DMA_TX_COL_MASK 0x78
-+#define DMA_TX_COL_SHIFT 3
-+#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */
-+#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */
-+#define DMA_TX_ERR_LATE BIT(9) /* late collision */
-+#define DMA_TX_ERR_LINK BIT(10) /* no carrier */
-+#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */
-+#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */
-+#define DMA_TX_ERROR BIT(15) /* frame aborted */
-+#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */
-+
-+#define DMA_TX1_BSIZE_MASK 0x000007ff
-+#define DMA_TX1_BSIZE_SHIFT 0
-+#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */
-+#define DMA_TX1_TER BIT(25) /* transmit end of ring */
-+#define DMA_TX1_FS BIT(29) /* first segment */
-+#define DMA_TX1_LS BIT(30) /* last segment */
-+#define DMA_TX1_IC BIT(31) /* interrupt on completion */
-+
-+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
-+
-+#define MAC_CONTROL_RE BIT(2) /* receive enable */
-+#define MAC_CONTROL_TE BIT(3) /* transmit enable */
-+#define MAC_CONTROL_DC BIT(5) /* Deferral check */
-+#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */
-+#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */
-+#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */
-+#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */
-+#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */
-+#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */
-+#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */
-+#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */
-+#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */
-+#define MAC_CONTROL_PR BIT(18) /* promiscuous mode (valid frames only) */
-+#define MAC_CONTROL_PM BIT(19) /* pass multicast */
-+#define MAC_CONTROL_F BIT(20) /* full-duplex */
-+#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */
-+#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */
-+#define MAC_CONTROL_BLE BIT(30) /* big endian mode */
-+#define MAC_CONTROL_RA BIT(31) /* receive all (valid and invalid frames) */
-+
-+#define MII_ADDR_BUSY BIT(0)
-+#define MII_ADDR_WRITE BIT(1)
-+#define MII_ADDR_REG_SHIFT 6
-+#define MII_ADDR_PHY_SHIFT 11
-+#define MII_DATA_SHIFT 0
-+
-+#define FLOW_CONTROL_FCE BIT(1)
-+
-+#define DMA_BUS_MODE_SWR BIT(0) /* software reset */
-+#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */
-+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
-+#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */
-+
-+#define DMA_STATUS_TI BIT(0) /* transmit interrupt */
-+#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */
-+#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */
-+#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */
-+#define DMA_STATUS_UNF BIT(5) /* transmit underflow */
-+#define DMA_STATUS_RI BIT(6) /* receive interrupt */
-+#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */
-+#define DMA_STATUS_RPS BIT(8) /* receive process stopped */
-+#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */
-+#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */
-+#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */
-+#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */
-+#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */
-+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
-+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
-+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
-+
-+#define DMA_CONTROL_SR BIT(1) /* start receive */
-+#define DMA_CONTROL_ST BIT(13) /* start transmit */
-+#define DMA_CONTROL_SF BIT(21) /* store and forward */
-+
-+
-+typedef struct {
-+ volatile unsigned int status; // OWN, Device control and status.
-+ volatile unsigned int devcs; // pkt Control bits + Length
-+ volatile unsigned int addr; // Current Address.
-+ volatile unsigned int descr; // Next descriptor in chain.
-+} ar231x_descr_t;
-+
-+
-+
-+//
-+// New Combo structure for Both Eth0 AND eth1
-+//
-+typedef struct {
-+ volatile unsigned int mac_control; /* 0x00 */
-+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
-+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
-+ volatile unsigned int mii_addr; /* 0x14 */
-+ volatile unsigned int mii_data; /* 0x18 */
-+ volatile unsigned int flow_control; /* 0x1c */
-+ volatile unsigned int vlan_tag; /* 0x20 */
-+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
-+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
-+
-+} ETHERNET_STRUCT;
-+
-+/********************************************************************
-+ * Interrupt controller
-+ ********************************************************************/
-+
-+typedef struct {
-+ volatile unsigned int wdog_control; /* 0x08 */
-+ volatile unsigned int wdog_timer; /* 0x0c */
-+ volatile unsigned int misc_status; /* 0x10 */
-+ volatile unsigned int misc_mask; /* 0x14 */
-+ volatile unsigned int global_status; /* 0x18 */
-+ volatile unsigned int reserved; /* 0x1c */
-+ volatile unsigned int reset_control; /* 0x20 */
-+} INTERRUPT;
-+
-+/********************************************************************
-+ * DMA controller
-+ ********************************************************************/
-+typedef struct {
-+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
-+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
-+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
-+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
-+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
-+ volatile unsigned int status; /* 0x14 (CSR5) */
-+ volatile unsigned int control; /* 0x18 (CSR6) */
-+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
-+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
-+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
-+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
-+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
-+} DMA;
-+
-+/*
-+ * Struct private for the Sibyte.
-+ *
-+ * Elements are grouped so variables used by the tx handling goes
-+ * together, and will go into the same cache lines etc. in order to
-+ * avoid cache line contention between the rx and tx handling on SMP.
-+ *
-+ * Frequently accessed variables are put at the beginning of the
-+ * struct to help the compiler generate better/shorter code.
-+ */
-+struct ar231x_private {
-+ struct net_device *dev;
-+ int version;
-+ u32 mb[2];
-+
-+ volatile ETHERNET_STRUCT *phy_regs;
-+ volatile ETHERNET_STRUCT *eth_regs;
-+ volatile DMA *dma_regs;
-+ volatile u32 *int_regs;
-+ struct ar231x_eth *cfg;
-+
-+ spinlock_t lock; /* Serialise access to device */
-+
-+ /*
-+ * RX and TX descriptors, must be adjacent
-+ */
-+ ar231x_descr_t *rx_ring;
-+ ar231x_descr_t *tx_ring;
-+
-+
-+ struct sk_buff **rx_skb;
-+ struct sk_buff **tx_skb;
-+
-+ /*
-+ * RX elements
-+ */
-+ u32 rx_skbprd;
-+ u32 cur_rx;
-+
-+ /*
-+ * TX elements
-+ */
-+ u32 tx_prd;
-+ u32 tx_csm;
-+
-+ /*
-+ * Misc elements
-+ */
-+ char name[48];
-+ struct {
-+ u32 address;
-+ u32 length;
-+ char *mapping;
-+ } desc;
-+
-+
-+ struct timer_list link_timer;
-+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
-+ unsigned short mac;
-+ unsigned short link; /* 0 - link down, 1 - link up */
-+ u16 phyData;
-+
-+ struct tasklet_struct rx_tasklet;
-+ int unloading;
-+
-+ struct phy_device *phy_dev;
-+ struct mii_bus *mii_bus;
-+ int oldduplex;
-+};
-+
-+
-+/*
-+ * Prototypes
-+ */
-+static int ar231x_init(struct net_device *dev);
-+#ifdef TX_TIMEOUT
-+static void ar231x_tx_timeout(struct net_device *dev);
-+#endif
-+static int ar231x_restart(struct net_device *dev);
-+static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
-+static int ar231x_open(struct net_device *dev);
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static int ar231x_close(struct net_device *dev);
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr,
-+ int cmd);
-+static void ar231x_init_cleanup(struct net_device *dev);
-+static int ar231x_setup_timer(struct net_device *dev);
-+static void ar231x_link_timer_fn(unsigned long data);
-+static void ar231x_check_link(struct net_device *dev);
-+#endif /* _AR2313_H_ */
diff --git a/target/linux/atheros/patches-2.6.32/120-spiflash.patch b/target/linux/atheros/patches-2.6.32/120-spiflash.patch
deleted file mode 100644
index 5a54e3324d..0000000000
--- a/target/linux/atheros/patches-2.6.32/120-spiflash.patch
+++ /dev/null
@@ -1,659 +0,0 @@
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
-@@ -114,6 +114,10 @@ config MTD_SST25L
- Set up your spi devices with the right board-specific platform data,
- if you want to specify device partitioning.
-
-+config MTD_AR2315
-+ tristate "Atheros AR2315+ SPI Flash support"
-+ depends on ATHEROS_AR2315
-+
- config MTD_SLRAM
- tristate "Uncached system RAM"
- help
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
- obj-$(CONFIG_MTD_SST25L) += sst25l.o
-+obj-$(CONFIG_MTD_AR2315) += ar2315.o
---- /dev/null
-+++ b/drivers/mtd/devices/ar2315.c
-@@ -0,0 +1,517 @@
-+
-+/*
-+ * MTD driver for the SPI Flash Memory support on Atheros AR2315
-+ *
-+ * Copyright (c) 2005-2006 Atheros Communications Inc.
-+ * Copyright (C) 2006-2007 FON Technology, SL.
-+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/platform_device.h>
-+#include <linux/sched.h>
-+#include <linux/root_dev.h>
-+#include <linux/delay.h>
-+#include <asm/delay.h>
-+#include <asm/io.h>
-+
-+#include <ar2315_spiflash.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+
-+
-+#define SPIFLASH "spiflash: "
-+#define busy_wait(_priv, _condition, _wait) do { \
-+ while (_condition) { \
-+ spin_unlock_bh(&_priv->lock); \
-+ if (_wait > 1) \
-+ msleep(_wait); \
-+ else if ((_wait == 1) && need_resched()) \
-+ schedule(); \
-+ else \
-+ udelay(1); \
-+ spin_lock_bh(&_priv->lock); \
-+ } \
-+} while (0)
-+
-+enum {
-+ FLASH_NONE,
-+ FLASH_1MB,
-+ FLASH_2MB,
-+ FLASH_4MB,
-+ FLASH_8MB,
-+ FLASH_16MB,
-+};
-+
-+/* Flash configuration table */
-+struct flashconfig {
-+ u32 byte_cnt;
-+ u32 sector_cnt;
-+ u32 sector_size;
-+};
-+
-+const struct flashconfig flashconfig_tbl[] = {
-+ [FLASH_NONE] = { 0, 0, 0},
-+ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE},
-+ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE},
-+ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE},
-+ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE},
-+ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE}
-+};
-+
-+/* Mapping of generic opcodes to STM serial flash opcodes */
-+enum {
-+ SPI_WRITE_ENABLE,
-+ SPI_WRITE_DISABLE,
-+ SPI_RD_STATUS,
-+ SPI_WR_STATUS,
-+ SPI_RD_DATA,
-+ SPI_FAST_RD_DATA,
-+ SPI_PAGE_PROGRAM,
-+ SPI_SECTOR_ERASE,
-+ SPI_BULK_ERASE,
-+ SPI_DEEP_PWRDOWN,
-+ SPI_RD_SIG,
-+};
-+
-+struct opcodes {
-+ __u16 code;
-+ __s8 tx_cnt;
-+ __s8 rx_cnt;
-+};
-+const struct opcodes stm_opcodes[] = {
-+ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
-+ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
-+ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
-+ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
-+ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
-+ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
-+ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
-+ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
-+ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
-+ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
-+ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
-+};
-+
-+/* Driver private data structure */
-+struct spiflash_priv {
-+ struct mtd_info mtd;
-+ void *readaddr; /* memory mapped data for read */
-+ void *mmraddr; /* memory mapped register space */
-+ wait_queue_head_t wq;
-+ spinlock_t lock;
-+ int state;
-+};
-+
-+#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
-+
-+enum {
-+ FL_READY,
-+ FL_READING,
-+ FL_ERASING,
-+ FL_WRITING
-+};
-+
-+/***************************************************************************************************/
-+
-+static u32
-+spiflash_read_reg(struct spiflash_priv *priv, int reg)
-+{
-+ return ar231x_read_reg((u32) priv->mmraddr + reg);
-+}
-+
-+static void
-+spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
-+{
-+ ar231x_write_reg((u32) priv->mmraddr + reg, data);
-+}
-+
-+static u32
-+spiflash_wait_busy(struct spiflash_priv *priv)
-+{
-+ u32 reg;
-+
-+ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
-+ SPI_CTL_BUSY, 0);
-+ return reg;
-+}
-+
-+static u32
-+spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr)
-+{
-+ const struct opcodes *op;
-+ u32 reg, mask;
-+
-+ op = &stm_opcodes[opcode];
-+ reg = spiflash_wait_busy(priv);
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE,
-+ ((u32) op->code) | (addr << 8));
-+
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
-+
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+ spiflash_wait_busy(priv);
-+
-+ if (!op->rx_cnt)
-+ return 0;
-+
-+ reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
-+
-+ switch (op->rx_cnt) {
-+ case 1:
-+ mask = 0x000000ff;
-+ break;
-+ case 2:
-+ mask = 0x0000ffff;
-+ break;
-+ case 3:
-+ mask = 0x00ffffff;
-+ break;
-+ default:
-+ mask = 0xffffffff;
-+ break;
-+ }
-+ reg &= mask;
-+
-+ return reg;
-+}
-+
-+
-+/*
-+ * Probe SPI flash device
-+ * Function returns 0 for failure.
-+ * and flashconfig_tbl array index for success.
-+ */
-+static int
-+spiflash_probe_chip (struct spiflash_priv *priv)
-+{
-+ u32 sig;
-+ int flash_size;
-+
-+ /* Read the signature on the flash device */
-+ spin_lock_bh(&priv->lock);
-+ sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
-+ spin_unlock_bh(&priv->lock);
-+
-+ switch (sig) {
-+ case STM_8MBIT_SIGNATURE:
-+ flash_size = FLASH_1MB;
-+ break;
-+ case STM_16MBIT_SIGNATURE:
-+ flash_size = FLASH_2MB;
-+ break;
-+ case STM_32MBIT_SIGNATURE:
-+ flash_size = FLASH_4MB;
-+ break;
-+ case STM_64MBIT_SIGNATURE:
-+ flash_size = FLASH_8MB;
-+ break;
-+ case STM_128MBIT_SIGNATURE:
-+ flash_size = FLASH_16MB;
-+ break;
-+ default:
-+ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
-+ return 0;
-+ }
-+
-+ return flash_size;
-+}
-+
-+
-+/* wait until the flash chip is ready and grab a lock */
-+static int spiflash_wait_ready(struct spiflash_priv *priv, int state)
-+{
-+ DECLARE_WAITQUEUE(wait, current);
-+
-+retry:
-+ spin_lock_bh(&priv->lock);
-+ if (priv->state != FL_READY) {
-+ set_current_state(TASK_UNINTERRUPTIBLE);
-+ add_wait_queue(&priv->wq, &wait);
-+ spin_unlock_bh(&priv->lock);
-+ schedule();
-+ remove_wait_queue(&priv->wq, &wait);
-+
-+ if(signal_pending(current))
-+ return 0;
-+
-+ goto retry;
-+ }
-+ priv->state = state;
-+
-+ return 1;
-+}
-+
-+static inline void spiflash_done(struct spiflash_priv *priv)
-+{
-+ priv->state = FL_READY;
-+ spin_unlock_bh(&priv->lock);
-+ wake_up(&priv->wq);
-+}
-+
-+static void
-+spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout)
-+{
-+ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
-+ SPI_STATUS_WIP, timeout);
-+ spiflash_done(priv);
-+}
-+
-+
-+
-+static int
-+spiflash_erase (struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ const struct opcodes *op;
-+ u32 temp, reg;
-+
-+ if (instr->addr + instr->len > mtd->size)
-+ return -EINVAL;
-+
-+ if (!spiflash_wait_ready(priv, FL_ERASING))
-+ return -EINTR;
-+
-+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+ reg = spiflash_wait_busy(priv);
-+
-+ op = &stm_opcodes[SPI_SECTOR_ERASE];
-+ temp = ((u32)instr->addr << 8) | (u32)(op->code);
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
-+
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= op->tx_cnt | SPI_CTL_START;
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+ spiflash_wait_complete(priv, 20);
-+
-+ instr->state = MTD_ERASE_DONE;
-+ mtd_erase_callback(instr);
-+
-+ return 0;
-+}
-+
-+static int
-+spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ u8 *read_addr;
-+
-+ if (!len)
-+ return 0;
-+
-+ if (from + len > mtd->size)
-+ return -EINVAL;
-+
-+ *retlen = len;
-+
-+ if (!spiflash_wait_ready(priv, FL_READING))
-+ return -EINTR;
-+
-+ read_addr = (u8 *)(priv->readaddr + from);
-+ memcpy_fromio(buf, read_addr, len);
-+ spiflash_done(priv);
-+
-+ return 0;
-+}
-+
-+static int
-+spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ u32 opcode, bytes_left;
-+
-+ *retlen = 0;
-+
-+ if (!len)
-+ return 0;
-+
-+ if (to + len > mtd->size)
-+ return -EINVAL;
-+
-+ bytes_left = len;
-+
-+ do {
-+ u32 read_len, reg, page_offset, spi_data = 0;
-+
-+ read_len = min(bytes_left, sizeof(u32));
-+
-+ /* 32-bit writes cannot span across a page boundary
-+ * (256 bytes). This types of writes require two page
-+ * program operations to handle it correctly. The STM part
-+ * will write the overflow data to the beginning of the
-+ * current page as opposed to the subsequent page.
-+ */
-+ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
-+
-+ if (page_offset > STM_PAGE_SIZE)
-+ read_len -= (page_offset - STM_PAGE_SIZE);
-+
-+ if (!spiflash_wait_ready(priv, FL_WRITING))
-+ return -EINTR;
-+
-+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+ spi_data = 0;
-+ switch (read_len) {
-+ case 4:
-+ spi_data |= buf[3] << 24;
-+ /* fall through */
-+ case 3:
-+ spi_data |= buf[2] << 16;
-+ /* fall through */
-+ case 2:
-+ spi_data |= buf[1] << 8;
-+ /* fall through */
-+ case 1:
-+ spi_data |= buf[0] & 0xff;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
-+ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
-+ (to & 0x00ffffff) << 8;
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
-+
-+ reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= (read_len + 4) | SPI_CTL_START;
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+ spiflash_wait_complete(priv, 1);
-+
-+ bytes_left -= read_len;
-+ to += read_len;
-+ buf += read_len;
-+
-+ *retlen += read_len;
-+ } while (bytes_left != 0);
-+
-+ return 0;
-+}
-+
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
-+#endif
-+
-+
-+static int
-+spiflash_probe(struct platform_device *pdev)
-+{
-+ struct spiflash_priv *priv;
-+ struct mtd_partition *parts;
-+ struct mtd_info *mtd;
-+ int index, num_parts;
-+ int result = 0;
-+
-+ priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL);
-+ spin_lock_init(&priv->lock);
-+ init_waitqueue_head(&priv->wq);
-+ priv->state = FL_READY;
-+ mtd = &priv->mtd;
-+
-+ priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
-+ if (!priv->mmraddr) {
-+ printk(KERN_WARNING SPIFLASH "Failed to map flash device\n");
-+ goto error;
-+ }
-+
-+ index = spiflash_probe_chip(priv);
-+ if (!index) {
-+ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
-+ goto error;
-+ }
-+
-+ priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
-+ if (!priv->readaddr) {
-+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
-+ goto error;
-+ }
-+
-+ platform_set_drvdata(pdev, priv);
-+ mtd->name = "spiflash";
-+ mtd->type = MTD_NORFLASH;
-+ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
-+ mtd->size = flashconfig_tbl[index].byte_cnt;
-+ mtd->erasesize = flashconfig_tbl[index].sector_size;
-+ mtd->writesize = 1;
-+ mtd->numeraseregions = 0;
-+ mtd->eraseregions = NULL;
-+ mtd->erase = spiflash_erase;
-+ mtd->read = spiflash_read;
-+ mtd->write = spiflash_write;
-+ mtd->owner = THIS_MODULE;
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+ /* parse redboot partitions */
-+ num_parts = parse_mtd_partitions(mtd, part_probe_types, &parts, 0);
-+ if (!num_parts)
-+ goto error;
-+
-+ result = add_mtd_partitions(mtd, parts, num_parts);
-+#endif
-+
-+ return result;
-+
-+error:
-+ if (priv->mmraddr)
-+ iounmap(priv->mmraddr);
-+ kfree(priv);
-+ return -ENXIO;
-+}
-+
-+static int
-+spiflash_remove (struct platform_device *pdev)
-+{
-+ struct spiflash_priv *priv = platform_get_drvdata(pdev);
-+ struct mtd_info *mtd = &priv->mtd;
-+
-+ del_mtd_partitions(mtd);
-+ iounmap(priv->mmraddr);
-+ iounmap(priv->readaddr);
-+ kfree(priv);
-+
-+ return 0;
-+}
-+
-+struct platform_driver spiflash_driver = {
-+ .driver.name = "spiflash",
-+ .probe = spiflash_probe,
-+ .remove = spiflash_remove,
-+};
-+
-+int __init
-+spiflash_init (void)
-+{
-+ return platform_driver_register(&spiflash_driver);
-+}
-+
-+void __exit
-+spiflash_exit (void)
-+{
-+ return platform_driver_unregister(&spiflash_driver);
-+}
-+
-+module_init (spiflash_init);
-+module_exit (spiflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
-+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
-+
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h
-@@ -0,0 +1,116 @@
-+/*
-+ * SPI Flash Memory support header file.
-+ *
-+ * Copyright (c) 2005, Atheros Communications Inc.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __AR2315_SPIFLASH_H
-+#define __AR2315_SPIFLASH_H
-+
-+#define STM_PAGE_SIZE 256
-+
-+#define SFI_WRITE_BUFFER_SIZE 4
-+#define SFI_FLASH_ADDR_MASK 0x00ffffff
-+
-+#define STM_8MBIT_SIGNATURE 0x13
-+#define STM_M25P80_BYTE_COUNT 1048576
-+#define STM_M25P80_SECTOR_COUNT 16
-+#define STM_M25P80_SECTOR_SIZE 0x10000
-+
-+#define STM_16MBIT_SIGNATURE 0x14
-+#define STM_M25P16_BYTE_COUNT 2097152
-+#define STM_M25P16_SECTOR_COUNT 32
-+#define STM_M25P16_SECTOR_SIZE 0x10000
-+
-+#define STM_32MBIT_SIGNATURE 0x15
-+#define STM_M25P32_BYTE_COUNT 4194304
-+#define STM_M25P32_SECTOR_COUNT 64
-+#define STM_M25P32_SECTOR_SIZE 0x10000
-+
-+#define STM_64MBIT_SIGNATURE 0x16
-+#define STM_M25P64_BYTE_COUNT 8388608
-+#define STM_M25P64_SECTOR_COUNT 128
-+#define STM_M25P64_SECTOR_SIZE 0x10000
-+
-+#define STM_128MBIT_SIGNATURE 0x17
-+#define STM_M25P128_BYTE_COUNT 16777216
-+#define STM_M25P128_SECTOR_COUNT 256
-+#define STM_M25P128_SECTOR_SIZE 0x10000
-+
-+#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
-+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
-+#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
-+#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
-+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
-+#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
-+#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
-+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
-+#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
-+#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
-+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
-+#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
-+#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
-+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
-+#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
-+
-+/*
-+ * ST Microelectronics Opcodes for Serial Flash
-+ */
-+
-+#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
-+#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
-+#define STM_OP_RD_STATUS 0x05 /* Read Status */
-+#define STM_OP_WR_STATUS 0x01 /* Write Status */
-+#define STM_OP_RD_DATA 0x03 /* Read Data */
-+#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
-+#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
-+#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
-+#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
-+#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
-+#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
-+
-+#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
-+#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
-+#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
-+#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
-+#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
-+#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+#define AR531XPLUS_SPI_READ 0x08000000
-+#define AR531XPLUS_SPI_MMR 0x11300000
-+#define AR531XPLUS_SPI_MMR_SIZE 12
-+
-+#define AR531XPLUS_SPI_CTL 0x00
-+#define AR531XPLUS_SPI_OPCODE 0x04
-+#define AR531XPLUS_SPI_DATA 0x08
-+
-+#define SPI_FLASH_READ AR531XPLUS_SPI_READ
-+#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
-+#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
-+#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
-+#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
-+#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
-+
-+#define SPI_CTL_START 0x00000100
-+#define SPI_CTL_BUSY 0x00010000
-+#define SPI_CTL_TXCNT_MASK 0x0000000f
-+#define SPI_CTL_RXCNT_MASK 0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
-+#define SPI_CTL_SIZE_MASK 0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK 0x03000000
-+#define SPI_OPCODE_MASK 0x000000ff
-+
-+#define SPI_STATUS_WIP STM_STATUS_WIP
-+
-+#endif
diff --git a/target/linux/atheros/patches-2.6.32/130-watchdog.patch b/target/linux/atheros/patches-2.6.32/130-watchdog.patch
deleted file mode 100644
index 4d5e777cc2..0000000000
--- a/target/linux/atheros/patches-2.6.32/130-watchdog.patch
+++ /dev/null
@@ -1,228 +0,0 @@
---- /dev/null
-+++ b/drivers/watchdog/ar2315-wtd.c
-@@ -0,0 +1,200 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
-+ * Based on EP93xx and ifxmips wdt driver
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/fs.h>
-+#include <linux/ioport.h>
-+#include <linux/notifier.h>
-+#include <linux/reboot.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+#include <asm/system.h>
-+#include <asm/addrspace.h>
-+#include <ar231x_platform.h>
-+#include <ar2315_regs.h>
-+#include <ar231x.h>
-+
-+#define CLOCK_RATE 40000000
-+#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
-+
-+static int wdt_timeout = 20;
-+static int started = 0;
-+static int in_use = 0;
-+
-+static void
-+ar2315_wdt_enable(void)
-+{
-+ ar231x_write_reg(AR2315_WD, wdt_timeout * CLOCK_RATE);
-+ ar231x_write_reg(AR2315_ISR, 0x80);
-+}
-+
-+static ssize_t
-+ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
-+{
-+ if(len)
-+ ar2315_wdt_enable();
-+ return len;
-+}
-+
-+static int
-+ar2315_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if(in_use)
-+ return -EBUSY;
-+ ar2315_wdt_enable();
-+ in_use = started = 1;
-+ return nonseekable_open(inode, file);
-+}
-+
-+static int
-+ar2315_wdt_release(struct inode *inode, struct file *file)
-+{
-+ in_use = 0;
-+ return 0;
-+}
-+
-+static irqreturn_t
-+ar2315_wdt_interrupt(int irq, void *dev_id)
-+{
-+ if(started)
-+ {
-+ printk(KERN_CRIT "watchdog expired, rebooting system\n");
-+ emergency_restart();
-+ } else {
-+ ar231x_write_reg(AR2315_WDC, 0);
-+ ar231x_write_reg(AR2315_WD, 0);
-+ ar231x_write_reg(AR2315_ISR, 0x80);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static struct watchdog_info ident = {
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+ .identity = "ar2315 Watchdog",
-+};
-+
-+static int
-+ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ int new_wdt_timeout;
-+ int ret = -ENOIOCTLCMD;
-+
-+ switch(cmd)
-+ {
-+ case WDIOC_GETSUPPORT:
-+ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
-+ break;
-+
-+ case WDIOC_KEEPALIVE:
-+ ar2315_wdt_enable();
-+ ret = 0;
-+ break;
-+
-+ case WDIOC_SETTIMEOUT:
-+ if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
-+ break;
-+ wdt_timeout = HEARTBEAT(new_wdt_timeout);
-+ ar2315_wdt_enable();
-+ break;
-+
-+ case WDIOC_GETTIMEOUT:
-+ ret = put_user(wdt_timeout, (int __user *)arg);
-+ break;
-+ }
-+ return ret;
-+}
-+
-+static struct file_operations ar2315_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .write = ar2315_wdt_write,
-+ .ioctl = ar2315_wdt_ioctl,
-+ .open = ar2315_wdt_open,
-+ .release = ar2315_wdt_release,
-+};
-+
-+static struct miscdevice ar2315_wdt_miscdev = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &ar2315_wdt_fops,
-+};
-+
-+static int
-+ar2315_wdt_probe(struct platform_device *dev)
-+{
-+ int ret = 0;
-+
-+ ar2315_wdt_enable();
-+ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
-+ if(ret)
-+ {
-+ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
-+ goto out;
-+ }
-+
-+ ret = misc_register(&ar2315_wdt_miscdev);
-+ if(ret)
-+ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
-+
-+out:
-+ return ret;
-+}
-+
-+static int
-+ar2315_wdt_remove(struct platform_device *dev)
-+{
-+ misc_deregister(&ar2315_wdt_miscdev);
-+ free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver ar2315_wdt_driver = {
-+ .probe = ar2315_wdt_probe,
-+ .remove = ar2315_wdt_remove,
-+ .driver = {
-+ .name = "ar2315_wdt",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init
-+init_ar2315_wdt(void)
-+{
-+ int ret = platform_driver_register(&ar2315_wdt_driver);
-+ if(ret)
-+ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
-+ return ret;
-+}
-+
-+static void __exit
-+exit_ar2315_wdt(void)
-+{
-+ platform_driver_unregister(&ar2315_wdt_driver);
-+}
-+
-+module_init(init_ar2315_wdt);
-+module_exit(exit_ar2315_wdt);
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -850,6 +850,12 @@ config TXX9_WDT
- help
- Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-
-+config ATHEROS_WDT
-+ tristate "Atheros wisoc Watchdog Timer"
-+ depends on ATHEROS_AR231X
-+ help
-+ Hardware driver for the Atheros wisoc Watchdog Timer.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -113,6 +113,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
-
- # PARISC Architecture
-
diff --git a/target/linux/atheros/patches-2.6.32/140-redboot_partition_scan.patch b/target/linux/atheros/patches-2.6.32/140-redboot_partition_scan.patch
deleted file mode 100644
index 289d4eb990..0000000000
--- a/target/linux/atheros/patches-2.6.32/140-redboot_partition_scan.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
- }
- } else {
- offset = directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- offset += master->erasesize;
- if (offset == master->size)
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
--
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-
-@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
diff --git a/target/linux/atheros/patches-2.6.32/141-redboot_various_erase_size_fix.patch b/target/linux/atheros/patches-2.6.32/141-redboot_various_erase_size_fix.patch
deleted file mode 100644
index b9cb0b4bcd..0000000000
--- a/target/linux/atheros/patches-2.6.32/141-redboot_various_erase_size_fix.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -39,6 +39,22 @@ static inline int redboot_checksum(struc
- return 1;
- }
-
-+static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset)
-+{
-+ struct mtd_erase_region_info *regions = mtd->eraseregions;
-+ int i;
-+
-+ for (i = 0; i < mtd->numeraseregions; i++) {
-+ if (regions[i].offset +
-+ regions[i].numblocks * regions[i].erasesize <= offset)
-+ continue;
-+
-+ return regions[i].erasesize;
-+ }
-+
-+ return mtd->erasesize;
-+}
-+
- static int parse_redboot_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long fis_origin)
-@@ -55,6 +71,7 @@ static int parse_redboot_partitions(stru
- int namelen = 0;
- int nulllen = 0;
- int numslots;
-+ int first_slot;
- unsigned long offset;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- static char nullstring[] = "unallocated";
-@@ -168,7 +185,10 @@ static int parse_redboot_partitions(stru
- goto out;
- }
-
-- for (i = 0; i < numslots; i++) {
-+ first_slot = (buf[i].flash_base & (master->erasesize - 1)) /
-+ sizeof(struct fis_image_desc);
-+
-+ for (i = first_slot; i < first_slot + numslots; i++) {
- struct fis_list *new_fl, **prev;
-
- if (buf[i].name[0] == 0xff) {
-@@ -244,12 +264,13 @@ static int parse_redboot_partitions(stru
- }
- #endif
- for ( ; i<nrparts; i++) {
-- if(max_offset < buf[i].flash_base + buf[i].size)
-- max_offset = buf[i].flash_base + buf[i].size;
- parts[i].size = fl->img->size;
- parts[i].offset = fl->img->flash_base;
- parts[i].name = names;
-
-+ if (max_offset < parts[i].offset + parts[i].size)
-+ max_offset = parts[i].offset + parts[i].size;
-+
- strcpy(names, fl->img->name);
- #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY
- if (!memcmp(names, "RedBoot", 8) ||
-@@ -279,7 +300,9 @@ static int parse_redboot_partitions(stru
- fl = fl->next;
- kfree(tmp_fl);
- }
-- if(master->size - max_offset >= master->erasesize)
-+
-+ if (master->size - max_offset >=
-+ mtd_get_offset_erasesize(master, max_offset))
- {
- parts[nrparts].size = master->size - max_offset;
- parts[nrparts].offset = max_offset;
diff --git a/target/linux/atheros/patches-2.6.32/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.32/200-ar2313_enable_mvswitch.patch
deleted file mode 100644
index b97a62d81c..0000000000
--- a/target/linux/atheros/patches-2.6.32/200-ar2313_enable_mvswitch.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/drivers/net/ar231x.c
-+++ b/drivers/net/ar231x.c
-@@ -735,6 +735,7 @@ static void ar231x_load_rx_ring(struct n
- for (i = 0; i < nr_bufs; i++) {
- struct sk_buff *skb;
- ar231x_descr_t *rd;
-+ int offset = RX_OFFSET;
-
- if (sp->rx_skb[idx])
- break;
-@@ -750,7 +751,9 @@ static void ar231x_load_rx_ring(struct n
- * Make sure IP header starts on a fresh cache line.
- */
- skb->dev = dev;
-- skb_reserve(skb, RX_OFFSET);
-+ if (sp->phy_dev)
-+ offset += sp->phy_dev->pkt_align;
-+ skb_reserve(skb, offset);
- sp->rx_skb[idx] = skb;
-
- rd = (ar231x_descr_t *) & sp->rx_ring[idx];
-@@ -824,20 +827,23 @@ static int ar231x_rx_int(struct net_devi
- /* alloc new buffer. */
- skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
- if (skb_new != NULL) {
-+ int offset;
-
- skb = sp->rx_skb[idx];
- /* set skb */
- skb_put(skb,
- ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
--
- dev->stats.rx_bytes += skb->len;
-- skb->protocol = eth_type_trans(skb, dev);
-- /* pass the packet to upper layers */
-- netif_rx(skb);
-
-+ /* pass the packet to upper layers */
-+ sp->rx(skb);
- skb_new->dev = dev;
-+
- /* 16 bit align */
-- skb_reserve(skb_new, RX_OFFSET);
-+ offset = RX_OFFSET;
-+ if (sp->phy_dev)
-+ offset += sp->phy_dev->pkt_align;
-+ skb_reserve(skb_new, offset);
- /* reset descriptor's curr_addr */
- rxdesc->addr = virt_to_phys(skb_new->data);
-
-@@ -1239,6 +1245,8 @@ static int ar231x_mdiobus_probe (struct
- return PTR_ERR(phydev);
- }
-
-+ sp->rx = phydev->netif_rx;
-+
- /* mask with MAC supported features */
- phydev->supported &= (SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
---- a/drivers/net/ar231x.h
-+++ b/drivers/net/ar231x.h
-@@ -221,6 +221,8 @@ typedef struct {
- */
- struct ar231x_private {
- struct net_device *dev;
-+ int (*rx)(struct sk_buff *skb);
-+
- int version;
- u32 mb[2];
-
diff --git a/target/linux/atheros/patches-2.6.32/210-reset_button.patch b/target/linux/atheros/patches-2.6.32/210-reset_button.patch
deleted file mode 100644
index 3c91818146..0000000000
--- a/target/linux/atheros/patches-2.6.32/210-reset_button.patch
+++ /dev/null
@@ -1,174 +0,0 @@
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -8,7 +8,7 @@
- # Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
- #
-
--obj-y += board.o prom.o devices.o
-+obj-y += board.o prom.o devices.o reset.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
---- /dev/null
-+++ b/arch/mips/ar231x/reset.c
-@@ -0,0 +1,160 @@
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/kobject.h>
-+#include <linux/workqueue.h>
-+#include <linux/skbuff.h>
-+#include <linux/netlink.h>
-+#include <net/sock.h>
-+#include <asm/uaccess.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include <gpio.h>
-+#include "devices.h"
-+
-+#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(ar231x_board.config->resetConfigGpio))
-+
-+struct event_t {
-+ struct work_struct wq;
-+ int set;
-+ unsigned long jiffies;
-+};
-+
-+static struct timer_list rst_button_timer;
-+static unsigned long seen;
-+
-+extern struct sock *uevent_sock;
-+extern u64 uevent_next_seqnum(void);
-+
-+static int no_release_workaround = 1;
-+module_param(no_release_workaround, int, 0);
-+
-+static inline void
-+add_msg(struct sk_buff *skb, char *msg)
-+{
-+ char *scratch;
-+ scratch = skb_put(skb, strlen(msg) + 1);
-+ sprintf(scratch, msg);
-+}
-+
-+static void
-+hotplug_button(struct work_struct *wq)
-+{
-+ struct sk_buff *skb;
-+ struct event_t *event;
-+ size_t len;
-+ char *scratch, *s;
-+ char buf[128];
-+
-+ event = container_of(wq, struct event_t, wq);
-+ if (!uevent_sock)
-+ goto done;
-+
-+ /* allocate message with the maximum possible size */
-+ s = event->set ? "pressed" : "released";
-+ len = strlen(s) + 2;
-+ skb = alloc_skb(NLMSG_GOODSIZE, GFP_KERNEL);
-+ if (!skb)
-+ goto done;
-+
-+ /* add header */
-+ scratch = skb_put(skb, len);
-+ sprintf(scratch, "%s@",s);
-+
-+ /* copy keys to our continuous event payload buffer */
-+ add_msg(skb, "HOME=/");
-+ add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin");
-+ add_msg(skb, "SUBSYSTEM=button");
-+ add_msg(skb, "BUTTON=reset");
-+ add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released"));
-+ sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ);
-+ add_msg(skb, buf);
-+ snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
-+ add_msg(skb, buf);
-+
-+ NETLINK_CB(skb).dst_group = 1;
-+ netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
-+
-+done:
-+ kfree(event);
-+}
-+
-+static void
-+reset_button_poll(unsigned long unused)
-+{
-+ struct event_t *event;
-+ int gpio = ~0;
-+
-+ if(!no_release_workaround)
-+ return;
-+
-+ gpio = ar231x_gpiodev->get();
-+ gpio &= (1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE));
-+ if(gpio) {
-+ rst_button_timer.expires = jiffies + (HZ / 4);
-+ add_timer(&rst_button_timer);
-+ return;
-+ }
-+
-+ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
-+ if (!event)
-+ return;
-+
-+ event->set = 0;
-+ event->jiffies = jiffies;
-+ INIT_WORK(&event->wq, hotplug_button);
-+ schedule_work(&event->wq);
-+}
-+
-+static irqreturn_t
-+button_handler(int irq, void *dev_id)
-+{
-+ static int pressed = 0;
-+ struct event_t *event;
-+ u32 gpio = ~0;
-+
-+ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
-+ if (!event)
-+ return IRQ_NONE;
-+
-+ pressed = !pressed;
-+
-+ gpio = ar231x_gpiodev->get() & (1 << (irq - AR531X_GPIO_IRQ_BASE));
-+
-+ event->set = gpio;
-+ if(!event->set)
-+ no_release_workaround = 0;
-+
-+ event->jiffies = jiffies;
-+
-+ INIT_WORK(&event->wq, hotplug_button);
-+ schedule_work(&event->wq);
-+
-+ seen = jiffies;
-+ if(event->set && no_release_workaround)
-+ mod_timer(&rst_button_timer, jiffies + (HZ / 4));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int __init
-+ar231x_init_reset(void)
-+{
-+ seen = jiffies;
-+
-+ if (ar231x_board.config->resetConfigGpio == 0xffff)
-+ return -ENODEV;
-+
-+ init_timer(&rst_button_timer);
-+ rst_button_timer.function = reset_button_poll;
-+ rst_button_timer.expires = jiffies + HZ / 50;
-+ add_timer(&rst_button_timer);
-+
-+ request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar231x_reset", NULL);
-+
-+ return 0;
-+}
-+
-+module_init(ar231x_init_reset);
diff --git a/target/linux/atheros/patches-2.6.32/220-enet_micrel_workaround.patch b/target/linux/atheros/patches-2.6.32/220-enet_micrel_workaround.patch
deleted file mode 100644
index 989bd76068..0000000000
--- a/target/linux/atheros/patches-2.6.32/220-enet_micrel_workaround.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/drivers/net/ar231x.c
-+++ b/drivers/net/ar231x.c
-@@ -148,6 +148,7 @@ static int ar231x_mdiobus_write(struct m
- static int ar231x_mdiobus_reset(struct mii_bus *bus);
- static int ar231x_mdiobus_probe (struct net_device *dev);
- static void ar231x_adjust_link(struct net_device *dev);
-+static bool no_phy = false;
-
- #ifndef ERR
- #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-@@ -278,6 +279,21 @@ int __init ar231x_probe(struct platform_
-
- mdiobus_register(sp->mii_bus);
-
-+ /* Workaround for Micrel switch, which is only available on
-+ * one PHY and cannot be configured through MDIO */
-+ if (!no_phy) {
-+ u32 phy_id = 0;
-+ get_phy_id(sp->mii_bus, 1, &phy_id);
-+ if (phy_id == 0x00221450)
-+ no_phy = true;
-+ }
-+ if (no_phy) {
-+ sp->link = 1;
-+ netif_carrier_on(dev);
-+ return 0;
-+ }
-+ no_phy = true;
-+
- if (ar231x_mdiobus_probe(dev) != 0) {
- printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
- rx_tasklet_cleanup(dev);
-@@ -334,8 +350,10 @@ static int __devexit ar231x_remove(struc
- rx_tasklet_cleanup(dev);
- ar231x_init_cleanup(dev);
- unregister_netdev(dev);
-- mdiobus_unregister(sp->mii_bus);
-- mdiobus_free(sp->mii_bus);
-+ if (sp->mii_bus) {
-+ mdiobus_unregister(sp->mii_bus);
-+ mdiobus_free(sp->mii_bus);
-+ }
- kfree(dev);
- return 0;
- }
-@@ -836,7 +854,12 @@ static int ar231x_rx_int(struct net_devi
- dev->stats.rx_bytes += skb->len;
-
- /* pass the packet to upper layers */
-- sp->rx(skb);
-+ if (sp->rx) {
-+ sp->rx(skb);
-+ } else {
-+ skb->protocol = eth_type_trans(skb, skb->dev);
-+ netif_rx(skb);
-+ }
- skb_new->dev = dev;
-
- /* 16 bit align */
-@@ -1123,6 +1146,9 @@ static int ar231x_ioctl(struct net_devic
- struct ar231x_private *sp = netdev_priv(dev);
- int ret;
-
-+ if (!sp->phy_dev)
-+ return -ENODEV;
-+
- switch (cmd) {
-
- case SIOCETHTOOL:
diff --git a/target/linux/atheros/patches-2.6.34/001-get_c0_compare_int_fix.patch b/target/linux/atheros/patches-2.6.34/001-get_c0_compare_int_fix.patch
deleted file mode 100644
index 43da96c3fe..0000000000
--- a/target/linux/atheros/patches-2.6.34/001-get_c0_compare_int_fix.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Fix the usage of get_c0_compare_int: override cp0_compare_irq if the returned
-value is in the MIPS CPU IRQ range to ensure that c0_compare_int_usable()
-still works.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -168,20 +168,23 @@ int __cpuinit r4k_clockevent_init(void)
- struct clock_event_device *cd;
- unsigned int irq;
-
-- if (!cpu_has_counter || !mips_hpt_frequency)
-- return -ENXIO;
--
-- if (!c0_compare_int_usable())
-- return -ENXIO;
--
- /*
- * With vectored interrupts things are getting platform specific.
- * get_c0_compare_int is a hook to allow a platform to return the
- * interrupt number of it's liking.
- */
- irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
-- if (get_c0_compare_int)
-+ if (get_c0_compare_int) {
- irq = get_c0_compare_int();
-+ if ((irq >= MIPS_CPU_IRQ_BASE) && (irq < MIPS_CPU_IRQ_BASE + 8))
-+ cp0_compare_irq = irq - MIPS_CPU_IRQ_BASE;
-+ }
-+
-+ if (!cpu_has_counter || !mips_hpt_frequency)
-+ return -ENXIO;
-+
-+ if (!c0_compare_int_usable())
-+ return -ENXIO;
-
- cd = &per_cpu(mips_clockevent_device, cpu);
-
diff --git a/target/linux/atheros/patches-2.6.34/100-board.patch b/target/linux/atheros/patches-2.6.34/100-board.patch
deleted file mode 100644
index 0731de1f73..0000000000
--- a/target/linux/atheros/patches-2.6.34/100-board.patch
+++ /dev/null
@@ -1,3126 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -84,6 +84,19 @@ config BCM63XX
- help
- Support for BCM63XX based boards
-
-+config ATHEROS_AR231X
-+ bool "Atheros 231x/531x SoC support"
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select GENERIC_GPIO
-+ help
-+ Support for AR231x and AR531x based boards
-+
- config MIPS_COBALT
- bool "Cobalt Server"
- select CEVT_R4K
-@@ -681,6 +694,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
-
- endchoice
-
-+source "arch/mips/ar231x/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -319,6 +319,13 @@ cflags-$(CONFIG_SOC_AU1X00) += -I$(srctr
-
-
- #
-+# Atheros AR5312/AR2312 WiSoC
-+#
-+core-$(CONFIG_ATHEROS_AR231X) += arch/mips/ar231x/
-+cflags-$(CONFIG_ATHEROS_AR231X) += -I$(srctree)/arch/mips/include/asm/mach-ar231x
-+load-$(CONFIG_ATHEROS_AR231X) += 0xffffffff80041000
-+
-+#
- # Cobalt Server
- #
- core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
---- /dev/null
-+++ b/arch/mips/ar231x/Kconfig
-@@ -0,0 +1,17 @@
-+config ATHEROS_AR5312
-+ bool "Atheros 5312/2312+ support"
-+ depends on ATHEROS_AR231X
-+ default y
-+
-+config ATHEROS_AR2315
-+ bool "Atheros 2315+ support"
-+ depends on ATHEROS_AR231X
-+ select DMA_NONCOHERENT
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select GENERIC_GPIO
-+ default y
---- /dev/null
-+++ b/arch/mips/ar231x/Makefile
-@@ -0,0 +1,13 @@
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License. See the file "COPYING" in the main directory of this archive
-+# for more details.
-+#
-+# Copyright (C) 2006 FON Technology, SL.
-+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+#
-+
-+obj-y += board.o prom.o devices.o
-+obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
-+obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
---- /dev/null
-+++ b/arch/mips/ar231x/board.c
-@@ -0,0 +1,251 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/random.h>
-+#include <linux/etherdevice.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/reboot.h>
-+#include <asm/io.h>
-+
-+#include <ar231x_platform.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+void (*ar231x_irq_dispatch)(void);
-+
-+static inline bool
-+check_radio_magic(u8 *addr)
-+{
-+ addr += 0x7a; /* offset for flash magic */
-+ if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static inline bool
-+check_board_data(u8 *flash_limit, u8 *addr, bool broken)
-+{
-+ /* config magic found */
-+ if (*((u32 *)addr) == AR531X_BD_MAGIC)
-+ return 1;
-+
-+ if (!broken)
-+ return 0;
-+
-+ if (check_radio_magic(addr + 0xf8))
-+ ar231x_board.radio = addr + 0xf8;
-+ if ((addr < flash_limit + 0x10000) &&
-+ check_radio_magic(addr + 0x10000))
-+ ar231x_board.radio = addr + 0x10000;
-+
-+ if (ar231x_board.radio) {
-+ /* broken board data detected, use radio data to find the offset,
-+ * user will fix this */
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static u8 *
-+find_board_config(u8 *flash_limit, bool broken)
-+{
-+ u8 *addr;
-+ int found = 0;
-+
-+ for (addr = flash_limit - 0x1000;
-+ addr >= flash_limit - 0x30000;
-+ addr -= 0x1000) {
-+
-+ if (check_board_data(flash_limit, addr, broken)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ if (!found)
-+ addr = NULL;
-+
-+ return addr;
-+}
-+
-+static u8 *
-+find_radio_config(u8 *flash_limit, u8 *board_config)
-+{
-+ int found;
-+ u8 *radio_config;
-+
-+ /*
-+ * Now find the start of Radio Configuration data, using heuristics:
-+ * Search forward from Board Configuration data by 0x1000 bytes
-+ * at a time until we find non-0xffffffff.
-+ */
-+ found = 0;
-+ for (radio_config = board_config + 0x1000;
-+ (radio_config < flash_limit);
-+ radio_config += 0x1000) {
-+ if ((*(u32 *)radio_config != 0xffffffff) &&
-+ check_radio_magic(radio_config)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ /* AR2316 relocates radio config to new location */
-+ if (!found) {
-+ for (radio_config = board_config + 0xf8;
-+ (radio_config < flash_limit - 0x1000 + 0xf8);
-+ radio_config += 0x1000) {
-+ if ((*(u32 *)radio_config != 0xffffffff) &&
-+ check_radio_magic(radio_config)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (!found) {
-+ printk("Could not find Radio Configuration data\n");
-+ radio_config = 0;
-+ }
-+
-+ return (u8 *) radio_config;
-+}
-+
-+int __init
-+ar231x_find_config(u8 *flash_limit)
-+{
-+ struct ar231x_boarddata *config;
-+ unsigned int rcfg_size;
-+ int broken_boarddata = 0;
-+ u8 *bcfg, *rcfg;
-+ u8 *board_data;
-+ u8 *radio_data;
-+ u32 offset;
-+
-+ ar231x_board.config = NULL;
-+ ar231x_board.radio = NULL;
-+ /* Copy the board and radio data to RAM, because accessing the mapped
-+ * memory of the flash directly after booting is not safe */
-+
-+ /* Try to find valid board and radio data */
-+ bcfg = find_board_config(flash_limit, false);
-+
-+ /* If that fails, try to at least find valid radio data */
-+ if (!bcfg) {
-+ bcfg = find_board_config(flash_limit, true);
-+ broken_boarddata = 1;
-+ }
-+
-+ if (!bcfg) {
-+ printk(KERN_WARNING "WARNING: No board configuration data found!\n");
-+ return -ENODEV;
-+ }
-+
-+ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
-+ ar231x_board.config = (struct ar231x_boarddata *) board_data;
-+ memcpy(board_data, bcfg, 0x100);
-+ if (broken_boarddata) {
-+ printk(KERN_WARNING "WARNING: broken board data detected\n");
-+ config = ar231x_board.config;
-+ if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
-+ printk(KERN_INFO "Fixing up empty mac addresses\n");
-+ config->resetConfigGpio = 0xffff;
-+ config->sysLedGpio = 0xffff;
-+ random_ether_addr(config->wlan0_mac);
-+ config->wlan0_mac[0] &= ~0x06;
-+ random_ether_addr(config->enet0_mac);
-+ random_ether_addr(config->enet1_mac);
-+ }
-+ }
-+
-+
-+ /* Radio config starts 0x100 bytes after board config, regardless
-+ * of what the physical layout on the flash chip looks like */
-+
-+ if (ar231x_board.radio)
-+ rcfg = (u8 *) ar231x_board.radio;
-+ else
-+ rcfg = find_radio_config(flash_limit, bcfg);
-+
-+ if (!rcfg)
-+ return -ENODEV;
-+
-+ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
-+ ar231x_board.radio = radio_data;
-+ offset = radio_data - board_data;
-+ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset);
-+ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
-+ memcpy(radio_data, rcfg, rcfg_size);
-+
-+ return 0;
-+}
-+
-+static void
-+ar231x_halt(void)
-+{
-+ local_irq_disable();
-+ while (1);
-+}
-+
-+void __init
-+plat_mem_setup(void)
-+{
-+ _machine_halt = ar231x_halt;
-+ pm_power_off = ar231x_halt;
-+
-+ ar5312_plat_setup();
-+ ar2315_plat_setup();
-+
-+ /* Disable data watchpoints */
-+ write_c0_watchlo0(0);
-+}
-+
-+
-+asmlinkage void
-+plat_irq_dispatch(void)
-+{
-+ ar231x_irq_dispatch();
-+}
-+
-+void __init
-+plat_time_init(void)
-+{
-+ ar5312_time_init();
-+ ar2315_time_init();
-+}
-+
-+unsigned int __cpuinit
-+get_c0_compare_int(void)
-+{
-+ return CP0_LEGACY_COMPARE_IRQ;
-+}
-+
-+void __init
-+arch_init_irq(void)
-+{
-+ clear_c0_status(ST0_IM);
-+ mips_cpu_irq_init();
-+
-+ /* Initialize interrupt controllers */
-+ ar5312_irq_init();
-+ ar2315_irq_init();
-+}
-+
-+
---- /dev/null
-+++ b/arch/mips/ar231x/prom.c
-@@ -0,0 +1,37 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright MontaVista Software Inc
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Prom setup file for ar531x
-+ */
-+
-+#include <linux/init.h>
-+#include <generated/autoconf.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/bootinfo.h>
-+#include <asm/addrspace.h>
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+void __init prom_init(void)
-+{
-+ ar5312_prom_init();
-+ ar2315_prom_init();
-+}
-+
-+void __init prom_free_prom_memory(void)
-+{
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
-@@ -0,0 +1,83 @@
-+#ifndef __AR531X_PLATFORM_H
-+#define __AR531X_PLATFORM_H
-+
-+/*
-+ * This is board-specific data that is stored in a "fixed" location in flash.
-+ * It is shared across operating systems, so it should not be changed lightly.
-+ * The main reason we need it is in order to extract the ethernet MAC
-+ * address(es).
-+ */
-+struct ar231x_boarddata {
-+ u32 magic; /* board data is valid */
-+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
-+ u16 cksum; /* checksum (starting with BD_REV 2) */
-+ u16 rev; /* revision of this struct */
-+#define BD_REV 4
-+ char boardName[64]; /* Name of board */
-+ u16 major; /* Board major number */
-+ u16 minor; /* Board minor number */
-+ u32 flags; /* Board configuration */
-+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
-+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
-+#define BD_UART1 0x00000004 /* UART1 is stuffed */
-+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
-+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
-+#define BD_SYSLED 0x00000020 /* System LED stuffed */
-+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
-+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
-+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
-+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
-+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
-+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
-+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
-+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
-+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
-+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
-+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
-+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
-+ u16 resetConfigGpio; /* Reset factory GPIO pin */
-+ u16 sysLedGpio; /* System LED GPIO pin */
-+
-+ u32 cpuFreq; /* CPU core frequency in Hz */
-+ u32 sysFreq; /* System frequency in Hz */
-+ u32 cntFreq; /* Calculated C0_COUNT frequency */
-+
-+ u8 wlan0_mac[6];
-+ u8 enet0_mac[6];
-+ u8 enet1_mac[6];
-+
-+ u16 pciId; /* Pseudo PCIID for common code */
-+ u16 memCap; /* cap bank1 in MB */
-+
-+ /* version 3 */
-+ u8 wlan1_mac[6]; /* (ar5212) */
-+};
-+
-+#define BOARD_CONFIG_BUFSZ 0x1000
-+
-+/*
-+ * Platform device information for the Wireless MAC
-+ */
-+struct ar231x_board_config {
-+ u16 devid;
-+
-+ /* board config data */
-+ struct ar231x_boarddata *config;
-+
-+ /* radio calibration data */
-+ const char *radio;
-+};
-+
-+/*
-+ * Platform device information for the Ethernet MAC
-+ */
-+struct ar231x_eth {
-+ u32 reset_base;
-+ u32 reset_mac;
-+ u32 reset_phy;
-+ u32 phy_base;
-+ struct ar231x_board_config *config;
-+ char *macaddr;
-+};
-+
-+#endif /* __AR531X_PLATFORM_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
-@@ -0,0 +1,84 @@
-+/*
-+ * Atheros SoC specific CPU feature overrides
-+ *
-+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was derived from: include/asm-mips/cpu-features.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ * Copyright (C) 2004 Maciej W. Rozycki
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
-+
-+/*
-+ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
-+ */
-+#define cpu_has_tlb 1
-+#define cpu_has_4kex 1
-+#define cpu_has_3k_cache 0
-+#define cpu_has_4k_cache 1
-+#define cpu_has_tx39_cache 0
-+#define cpu_has_sb1_cache 0
-+#define cpu_has_fpu 0
-+#define cpu_has_32fpr 0
-+#define cpu_has_counter 1
-+/* #define cpu_has_watch ? */
-+/* #define cpu_has_divec ? */
-+/* #define cpu_has_vce ? */
-+/* #define cpu_has_cache_cdex_p ? */
-+/* #define cpu_has_cache_cdex_s ? */
-+/* #define cpu_has_prefetch ? */
-+/* #define cpu_has_mcheck ? */
-+#define cpu_has_ejtag 1
-+
-+#if !defined(CONFIG_ATHEROS_AR5312)
-+# define cpu_has_llsc 1
-+#else
-+/*
-+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
-+ * ll/sc instructions.
-+ */
-+# define cpu_has_llsc 0
-+#endif
-+
-+#define cpu_has_mips16 0
-+#define cpu_has_mdmx 0
-+#define cpu_has_mips3d 0
-+#define cpu_has_smartmips 0
-+
-+/* #define cpu_has_vtag_icache ? */
-+/* #define cpu_has_dc_aliases ? */
-+/* #define cpu_has_ic_fills_f_dc ? */
-+/* #define cpu_has_pindexed_dcache ? */
-+
-+/* #define cpu_icache_snoops_remote_store ? */
-+
-+#define cpu_has_mips32r1 1
-+
-+#if !defined(CONFIG_ATHEROS_AR5312)
-+# define cpu_has_mips32r2 1
-+#endif
-+
-+#define cpu_has_mips64r1 0
-+#define cpu_has_mips64r2 0
-+
-+#define cpu_has_dsp 0
-+#define cpu_has_mipsmt 0
-+
-+/* #define cpu_has_nofpuex ? */
-+#define cpu_has_64bits 0
-+#define cpu_has_64bit_zero_reg 0
-+#define cpu_has_64bit_gp_regs 0
-+#define cpu_has_64bit_addresses 0
-+
-+/* #define cpu_has_inclusive_pcaches ? */
-+
-+/* #define cpu_dcache_line_size() ? */
-+/* #define cpu_icache_line_size() ? */
-+
-+#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h
-@@ -0,0 +1,64 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
-+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ */
-+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
-+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
-+
-+#define PCI_DMA_OFFSET 0x20000000
-+
-+struct device;
-+
-+static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-+{
-+ return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
-+}
-+
-+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
-+{
-+ return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
-+}
-+
-+static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-+ dma_addr_t dma_addr)
-+{
-+ return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
-+}
-+
-+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-+ size_t size, enum dma_data_direction direction)
-+{
-+}
-+
-+static inline int plat_dma_supported(struct device *dev, u64 mask)
-+{
-+ return 1;
-+}
-+
-+static inline void plat_extra_sync_for_device(struct device *dev)
-+{
-+ return;
-+}
-+
-+static inline int plat_dma_mapping_error(struct device *dev,
-+ dma_addr_t dma_addr)
-+{
-+ return 0;
-+}
-+
-+static inline int plat_device_is_coherent(struct device *dev)
-+{
-+#ifdef CONFIG_DMA_COHERENT
-+ return 1;
-+#endif
-+#ifdef CONFIG_DMA_NONCOHERENT
-+ return 0;
-+#endif
-+}
-+
-+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/gpio.h
-@@ -0,0 +1,79 @@
-+#ifndef _ATHEROS_GPIO_H_
-+#define _ATHEROS_GPIO_H_
-+
-+#include <ar231x.h>
-+
-+struct ar231x_gpiodev {
-+ u32 valid_mask;
-+ u32 (*get_output)(void);
-+ u32 (*set_output)(u32 mask, u32 val);
-+ u32 (*get)(void);
-+ u32 (*set)(u32 mask, u32 val);
-+};
-+
-+extern const struct ar231x_gpiodev *ar231x_gpiodev;
-+
-+/*
-+ * Wrappers for the generic GPIO layer
-+ */
-+
-+static inline int gpio_direction_input(unsigned gpio) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return -ENXIO;
-+
-+ ar231x_gpiodev->set_output(mask, 0);
-+ return 0;
-+}
-+
-+static inline void gpio_set_value(unsigned gpio, int value) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return;
-+
-+ ar231x_gpiodev->set(mask, (!!value) * mask);
-+}
-+
-+static inline int gpio_direction_output(unsigned gpio, int value) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return -ENXIO;
-+
-+ ar231x_gpiodev->set_output(mask, mask);
-+ ar231x_gpiodev->set(mask, (!!value) * mask);
-+ return 0;
-+}
-+
-+/* Reads the gpio pin. Unchecked function */
-+static inline int gpio_get_value(unsigned gpio) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return 0;
-+
-+ return !!(ar231x_gpiodev->get() & mask);
-+}
-+
-+static inline int gpio_request(unsigned gpio, const char *label) {
-+ return 0;
-+}
-+
-+static inline void gpio_free(unsigned gpio) {
-+}
-+
-+/* Returns IRQ to attach for gpio. Unchecked function */
-+static inline int gpio_to_irq(unsigned gpio) {
-+ return AR531X_GPIO_IRQ(gpio);
-+}
-+
-+/* Returns gpio for IRQ attached. Unchecked function */
-+static inline int irq_to_gpio(unsigned irq) {
-+ return (irq - (AR531X_GPIO_IRQ(0)));
-+}
-+
-+#include <asm-generic/gpio.h> /* cansleep wrappers */
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/reset.h
-@@ -0,0 +1,6 @@
-+#ifndef __AR531X_RESET_H
-+#define __AR531X_RESET_H
-+
-+void ar531x_disable_reset_button(void);
-+
-+#endif /* __AR531X_RESET_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/war.h
-@@ -0,0 +1,25 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
-+ */
-+#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
-+#define __ASM_MIPS_MACH_ATHEROS_WAR_H
-+
-+#define R4600_V1_INDEX_ICACHEOP_WAR 0
-+#define R4600_V1_HIT_CACHEOP_WAR 0
-+#define R4600_V2_HIT_CACHEOP_WAR 0
-+#define R5432_CP0_INTERRUPT_WAR 0
-+#define BCM1250_M3_WAR 0
-+#define SIBYTE_1956_WAR 0
-+#define MIPS4K_ICACHE_REFILL_WAR 0
-+#define MIPS_CACHE_SYNC_WAR 0
-+#define TX49XX_ICACHE_INDEX_INV_WAR 0
-+#define RM9000_CDEX_SMP_WAR 0
-+#define ICACHE_REFILLS_WORKAROUND_WAR 0
-+#define R10000_LLSC_WAR 0
-+#define MIPS34K_MISSED_ITLB_WAR 0
-+
-+#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
-@@ -0,0 +1,580 @@
-+/*
-+ * Register definitions for AR2315+
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef __AR2315_REG_H
-+#define __AR2315_REG_H
-+
-+/*
-+ * IRQs
-+ */
-+#define AR2315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR2315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR2315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR2315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-+#define AR2315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+
-+/*
-+ * Address map
-+ */
-+#define AR2315_SPI_READ 0x08000000 /* SPI FLASH */
-+#define AR2315_WLAN0 0xB0000000 /* Wireless MMR */
-+#define AR2315_PCI 0xB0100000 /* PCI MMR */
-+#define AR2315_SDRAMCTL 0xB0300000 /* SDRAM MMR */
-+#define AR2315_LOCAL 0xB0400000 /* LOCAL BUS MMR */
-+#define AR2315_ENET0 0xB0500000 /* ETHERNET MMR */
-+#define AR2315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */
-+#define AR2315_UART0 0xB1100003 /* UART MMR */
-+#define AR2315_SPI 0xB1300000 /* SPI FLASH MMR */
-+#define AR2315_PCIEXT 0x80000000 /* pci external */
-+
-+/*
-+ * Reset Register
-+ */
-+#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000)
-+
-+#define AR2315_RESET_COLD_AHB 0x00000001
-+#define AR2315_RESET_COLD_APB 0x00000002
-+#define AR2315_RESET_COLD_CPU 0x00000004
-+#define AR2315_RESET_COLD_CPUWARM 0x00000008
-+#define AR2315_RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
-+#define AR2317_RESET_SYSTEM 0x00000010
-+
-+
-+#define AR2315_RESET (AR2315_DSLBASE + 0x0004)
-+
-+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
-+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
-+#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
-+#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
-+#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */
-+#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */
-+#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
-+#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI interface */
-+#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */
-+#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
-+#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
-+#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
-+
-+/*
-+ * AHB master arbitration control
-+ */
-+#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008)
-+
-+#define AR2315_ARB_CPU 0x00000001 /* CPU, default */
-+#define AR2315_ARB_WLAN 0x00000002 /* WLAN */
-+#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
-+#define AR2315_ARB_LOCAL 0x00000008 /* LOCAL */
-+#define AR2315_ARB_PCI 0x00000010 /* PCI */
-+#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */
-+#define AR2315_ARB_RETRY 0x00000100 /* retry policy, debug only */
-+
-+/*
-+ * Config Register
-+ */
-+#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c)
-+
-+#define AR2315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
-+#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
-+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
-+#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */
-+#define AR2315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
-+#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
-+#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
-+
-+#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
-+#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */
-+#define AR2315_CONFIG_PCIAHB 0x00000800
-+#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
-+#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */
-+#define AR2315_CONFIG_CPU_DRAM 0x00010000
-+#define AR2315_CONFIG_CPU_PCI 0x00020000
-+#define AR2315_CONFIG_CPU_MMR 0x00040000
-+#define AR2315_CONFIG_BIG 0x00000400
-+
-+
-+/*
-+ * NMI control
-+ */
-+#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010)
-+
-+#define AR2315_NMI_EN 1
-+
-+/*
-+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
-+ */
-+#define AR2315_SREV (AR2315_DSLBASE + 0x0014)
-+
-+#define AR2315_REV_MAJ 0x00f0
-+#define AR2315_REV_MAJ_S 4
-+#define AR2315_REV_MIN 0x000f
-+#define AR2315_REV_MIN_S 0
-+#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN)
-+
-+/*
-+ * Interface Enable
-+ */
-+#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018)
-+
-+#define AR2315_IF_MASK 0x00000007
-+#define AR2315_IF_DISABLED 0
-+#define AR2315_IF_PCI 1
-+#define AR2315_IF_TS_LOCAL 2
-+#define AR2315_IF_ALL 3 /* only for emulation with separate pins */
-+#define AR2315_IF_LOCAL_HOST 0x00000008
-+#define AR2315_IF_PCI_HOST 0x00000010
-+#define AR2315_IF_PCI_INTR 0x00000020
-+#define AR2315_IF_PCI_CLK_MASK 0x00030000
-+#define AR2315_IF_PCI_CLK_INPUT 0
-+#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
-+#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
-+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
-+#define AR2315_IF_PCI_CLK_SHIFT 16
-+
-+/*
-+ * APB Interrupt control
-+ */
-+
-+#define AR2315_ISR (AR2315_DSLBASE + 0x0020)
-+#define AR2315_IMR (AR2315_DSLBASE + 0x0024)
-+#define AR2315_GISR (AR2315_DSLBASE + 0x0028)
-+
-+#define AR2315_ISR_UART0 0x0001 /* high speed UART */
-+#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */
-+#define AR2315_ISR_SPI 0x0004 /* SPI bus */
-+#define AR2315_ISR_AHB 0x0008 /* AHB error */
-+#define AR2315_ISR_APB 0x0010 /* APB error */
-+#define AR2315_ISR_TIMER 0x0020 /* timer */
-+#define AR2315_ISR_GPIO 0x0040 /* GPIO */
-+#define AR2315_ISR_WD 0x0080 /* watchdog */
-+#define AR2315_ISR_IR_RSVD 0x0100 /* IR */
-+
-+#define AR2315_GISR_MISC 0x0001
-+#define AR2315_GISR_WLAN0 0x0002
-+#define AR2315_GISR_MPEGTS_RSVD 0x0004
-+#define AR2315_GISR_LOCALPCI 0x0008
-+#define AR2315_GISR_WMACPOLL 0x0010
-+#define AR2315_GISR_TIMER 0x0020
-+#define AR2315_GISR_ETHERNET 0x0040
-+
-+/*
-+ * Interrupt routing from IO to the processor IP bits
-+ * Define our inter mask and level
-+ */
-+#define AR2315_INTR_MISCIO SR_IBIT3
-+#define AR2315_INTR_WLAN0 SR_IBIT4
-+#define AR2315_INTR_ENET0 SR_IBIT5
-+#define AR2315_INTR_LOCALPCI SR_IBIT6
-+#define AR2315_INTR_WMACPOLL SR_IBIT7
-+#define AR2315_INTR_COMPARE SR_IBIT8
-+
-+/*
-+ * Timers
-+ */
-+#define AR2315_TIMER (AR2315_DSLBASE + 0x0030)
-+#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034)
-+#define AR2315_WD (AR2315_DSLBASE + 0x0038)
-+#define AR2315_WDC (AR2315_DSLBASE + 0x003c)
-+
-+#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000
-+#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */
-+#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */
-+
-+/*
-+ * CPU Performance Counters
-+ */
-+#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048)
-+#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c)
-+
-+#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */
-+#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */
-+#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */
-+#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */
-+#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */
-+#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
-+#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
-+
-+#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */
-+#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */
-+#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
-+#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
-+#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */
-+#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */
-+#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */
-+
-+/*
-+ * AHB Error Reporting.
-+ */
-+#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */
-+#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */
-+#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */
-+#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */
-+#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */
-+
-+#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
-+ /* write 1 to clear all bits in ERR0 */
-+#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
-+#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
-+
-+#define AR2315_PROCERR_HMAST 0x0000000f
-+#define AR2315_PROCERR_HMAST_DFLT 0
-+#define AR2315_PROCERR_HMAST_WMAC 1
-+#define AR2315_PROCERR_HMAST_ENET 2
-+#define AR2315_PROCERR_HMAST_PCIENDPT 3
-+#define AR2315_PROCERR_HMAST_LOCAL 4
-+#define AR2315_PROCERR_HMAST_CPU 5
-+#define AR2315_PROCERR_HMAST_PCITGT 6
-+
-+#define AR2315_PROCERR_HMAST_S 0
-+#define AR2315_PROCERR_HWRITE 0x00000010
-+#define AR2315_PROCERR_HSIZE 0x00000060
-+#define AR2315_PROCERR_HSIZE_S 5
-+#define AR2315_PROCERR_HTRANS 0x00000180
-+#define AR2315_PROCERR_HTRANS_S 7
-+#define AR2315_PROCERR_HBURST 0x00000e00
-+#define AR2315_PROCERR_HBURST_S 9
-+
-+/*
-+ * Clock Control
-+ */
-+#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064)
-+#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068)
-+#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c)
-+#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070)
-+#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074)
-+#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080)
-+#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084)
-+
-+/* PLLc Control fields */
-+#define PLLC_REF_DIV_M 0x00000003
-+#define PLLC_REF_DIV_S 0
-+#define PLLC_FDBACK_DIV_M 0x0000007C
-+#define PLLC_FDBACK_DIV_S 2
-+#define PLLC_ADD_FDBACK_DIV_M 0x00000080
-+#define PLLC_ADD_FDBACK_DIV_S 7
-+#define PLLC_CLKC_DIV_M 0x0001c000
-+#define PLLC_CLKC_DIV_S 14
-+#define PLLC_CLKM_DIV_M 0x00700000
-+#define PLLC_CLKM_DIV_S 20
-+
-+/* CPU CLK Control fields */
-+#define CPUCLK_CLK_SEL_M 0x00000003
-+#define CPUCLK_CLK_SEL_S 0
-+#define CPUCLK_CLK_DIV_M 0x0000000c
-+#define CPUCLK_CLK_DIV_S 2
-+
-+/* AMBA CLK Control fields */
-+#define AMBACLK_CLK_SEL_M 0x00000003
-+#define AMBACLK_CLK_SEL_S 0
-+#define AMBACLK_CLK_DIV_M 0x0000000c
-+#define AMBACLK_CLK_DIV_S 2
-+
-+/*
-+ * GPIO
-+ */
-+#define AR2315_GPIO_DI (AR2315_DSLBASE + 0x0088)
-+#define AR2315_GPIO_DO (AR2315_DSLBASE + 0x0090)
-+#define AR2315_GPIO_CR (AR2315_DSLBASE + 0x0098)
-+#define AR2315_GPIO_INT (AR2315_DSLBASE + 0x00a0)
-+
-+#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
-+#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */
-+#define AR2315_GPIO_CR_I(x) (0) /* input */
-+
-+#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */
-+#define AR2315_GPIO_INT_M (0x3F) /* mask for int */
-+#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */
-+#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */
-+
-+#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */
-+#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */
-+#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */
-+#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */
-+#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */
-+
-+#define AR2315_RESET_GPIO 5
-+#define AR2315_NUM_GPIO 22
-+
-+/*
-+ * PCI Clock Control
-+ */
-+#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4)
-+
-+#define AR2315_PCICLK_INPUT_M 0x3
-+#define AR2315_PCICLK_INPUT_S 0
-+
-+#define AR2315_PCICLK_PLLC_CLKM 0
-+#define AR2315_PCICLK_PLLC_CLKM1 1
-+#define AR2315_PCICLK_PLLC_CLKC 2
-+#define AR2315_PCICLK_REF_CLK 3
-+
-+#define AR2315_PCICLK_DIV_M 0xc
-+#define AR2315_PCICLK_DIV_S 2
-+
-+#define AR2315_PCICLK_IN_FREQ 0
-+#define AR2315_PCICLK_IN_FREQ_DIV_6 1
-+#define AR2315_PCICLK_IN_FREQ_DIV_8 2
-+#define AR2315_PCICLK_IN_FREQ_DIV_10 3
-+
-+/*
-+ * Observation Control Register
-+ */
-+#define AR2315_OCR (AR2315_DSLBASE + 0x00b0)
-+#define OCR_GPIO0_IRIN 0x0040
-+#define OCR_GPIO1_IROUT 0x0080
-+#define OCR_GPIO3_RXCLR 0x0200
-+
-+/*
-+ * General Clock Control
-+ */
-+
-+#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4)
-+#define MISCCLK_PLLBYPASS_EN 0x00000001
-+#define MISCCLK_PROCREFCLK 0x00000002
-+
-+/*
-+ * SDRAM Controller
-+ * - No read or write buffers are included.
-+ */
-+#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00)
-+#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c)
-+#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10)
-+
-+#define SDRAM_DATA_WIDTH_M 0x00006000
-+#define SDRAM_DATA_WIDTH_S 13
-+
-+#define SDRAM_COL_WIDTH_M 0x00001E00
-+#define SDRAM_COL_WIDTH_S 9
-+
-+#define SDRAM_ROW_WIDTH_M 0x000001E0
-+#define SDRAM_ROW_WIDTH_S 5
-+
-+#define SDRAM_BANKADDR_BITS_M 0x00000018
-+#define SDRAM_BANKADDR_BITS_S 3
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+
-+#define AR2315_SPI_CTL (AR2315_SPI + 0x00)
-+#define AR2315_SPI_OPCODE (AR2315_SPI + 0x04)
-+#define AR2315_SPI_DATA (AR2315_SPI + 0x08)
-+
-+#define SPI_CTL_START 0x00000100
-+#define SPI_CTL_BUSY 0x00010000
-+#define SPI_CTL_TXCNT_MASK 0x0000000f
-+#define SPI_CTL_RXCNT_MASK 0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
-+#define SPI_CTL_SIZE_MASK 0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK 0x03000000
-+#define SPI_OPCODE_MASK 0x000000ff
-+
-+/*
-+ * PCI Bus Interface Registers
-+ */
-+#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008)
-+#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c)
-+#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
-+#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
-+#define AR2315_PCIMISC_RST_MODE 0x00000030
-+#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
-+#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
-+#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
-+#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
-+#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
-+#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
-+#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
-+#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
-+
-+#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010)
-+
-+#define AR2315_PCI_UNCACHE_CFG (AR2315_PCI + 0x0014)
-+
-+#define AR2315_PCI_IN_EN (AR2315_PCI + 0x0100)
-+#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */
-+#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */
-+#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */
-+#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */
-+
-+#define AR2315_PCI_IN_DIS (AR2315_PCI + 0x0104)
-+#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
-+#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
-+#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
-+#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
-+
-+#define AR2315_PCI_IN_PTR (AR2315_PCI + 0x0200)
-+
-+#define AR2315_PCI_OUT_EN (AR2315_PCI + 0x0400)
-+#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
-+
-+#define AR2315_PCI_OUT_DIS (AR2315_PCI + 0x0404)
-+#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
-+
-+#define AR2315_PCI_OUT_PTR (AR2315_PCI + 0x0408)
-+
-+#define AR2315_PCI_INT_STATUS (AR2315_PCI + 0x0500) /* write one to clr */
-+#define AR2315_PCI_TXINT 0x00000001 /* Desc In Completed */
-+#define AR2315_PCI_TXOK 0x00000002 /* Desc In OK */
-+#define AR2315_PCI_TXERR 0x00000004 /* Desc In ERR */
-+#define AR2315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
-+#define AR2315_PCI_RXINT 0x00000010 /* Desc Out Completed */
-+#define AR2315_PCI_RXOK 0x00000020 /* Desc Out OK */
-+#define AR2315_PCI_RXERR 0x00000040 /* Desc Out ERR */
-+#define AR2315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
-+#define AR2315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
-+#define AR2315_PCI_MASK 0x0000FFFF /* Desc Mask */
-+#define AR2315_PCI_EXT_INT 0x02000000
-+#define AR2315_PCI_ABORT_INT 0x04000000
-+
-+#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */
-+
-+#define AR2315_PCI_INTEN_REG (AR2315_PCI + 0x0508)
-+#define AR2315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
-+#define AR2315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
-+
-+#define AR2315_PCI_HOST_IN_EN (AR2315_PCI + 0x0800)
-+#define AR2315_PCI_HOST_IN_DIS (AR2315_PCI + 0x0804)
-+#define AR2315_PCI_HOST_IN_PTR (AR2315_PCI + 0x0810)
-+#define AR2315_PCI_HOST_OUT_EN (AR2315_PCI + 0x0900)
-+#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904)
-+#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908)
-+
-+
-+/*
-+ * Local Bus Interface Registers
-+ */
-+#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000)
-+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
-+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
-+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
-+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
-+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
-+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
-+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
-+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
-+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
-+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
-+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
-+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
-+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
-+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
-+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
-+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
-+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
-+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
-+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
-+#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
-+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
-+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
-+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
-+
-+#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004)
-+#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */
-+
-+#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008)
-+#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C)
-+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
-+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
-+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
-+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
-+#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80
-+#define AR2315_LBM_TIMEOUT_SHFT 7
-+#define AR2315_LBM_PORTMUX 0x07000000
-+
-+
-+#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010)
-+
-+#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100)
-+#define AR2315_LB_TXEN_0 0x01
-+#define AR2315_LB_TXEN_1 0x02
-+#define AR2315_LB_TXEN_2 0x04
-+#define AR2315_LB_TXEN_3 0x08
-+
-+#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104)
-+#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200)
-+
-+#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400)
-+#define AR2315_LB_RXEN 0x01
-+
-+#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404)
-+#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408)
-+
-+#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500)
-+#define AR2315_INT_TX_DESC 0x0001
-+#define AR2315_INT_TX_OK 0x0002
-+#define AR2315_INT_TX_ERR 0x0004
-+#define AR2315_INT_TX_EOF 0x0008
-+#define AR2315_INT_RX_DESC 0x0010
-+#define AR2315_INT_RX_OK 0x0020
-+#define AR2315_INT_RX_ERR 0x0040
-+#define AR2315_INT_RX_EOF 0x0080
-+#define AR2315_INT_TX_TRUNC 0x0100
-+#define AR2315_INT_TX_STARVE 0x0200
-+#define AR2315_INT_LB_TIMEOUT 0x0400
-+#define AR2315_INT_LB_ERR 0x0800
-+#define AR2315_INT_MBOX_WR 0x1000
-+#define AR2315_INT_MBOX_RD 0x2000
-+
-+/* Bit definitions for INT MASK are the same as INT_STATUS */
-+#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504)
-+
-+#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508)
-+#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600)
-+
-+/*
-+ * IR Interface Registers
-+ */
-+#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000)
-+
-+#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */
-+
-+#define AR2315_IR_CONTROL (AR2315_IR + 0x0800)
-+#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */
-+#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */
-+#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
-+#define AR2315_IRCTL_SAMPLECLK_SHFT 1
-+#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
-+#define AR2315_IRCTL_OUTPUTCLK_SHFT 14
-+
-+#define AR2315_IR_STATUS (AR2315_IR + 0x0804)
-+#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */
-+#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */
-+
-+#define AR2315_IR_CONFIG (AR2315_IR + 0x0808)
-+#define AR2315_IRCFG_INVIN 0x00000001 /* invert input polarity */
-+#define AR2315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
-+#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
-+#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
-+#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
-+#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
-+#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
-+#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
-+#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
-+
-+#define HOST_PCI_DEV_ID 3
-+#define HOST_PCI_MBAR0 0x10000000
-+#define HOST_PCI_MBAR1 0x20000000
-+#define HOST_PCI_MBAR2 0x30000000
-+
-+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
-+#define PCI_DEVICE_MEM_SPACE 0x800000
-+
-+#endif /* __AR2315_REG_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
-@@ -0,0 +1,236 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef AR5312_H
-+#define AR5312_H
-+
-+#include <asm/addrspace.h>
-+
-+/*
-+ * IRQs
-+ */
-+
-+#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-+#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+
-+
-+/* Address Map */
-+#define AR531X_WLAN0 0x18000000
-+#define AR531X_WLAN1 0x18500000
-+#define AR531X_ENET0 0x18100000
-+#define AR531X_ENET1 0x18200000
-+#define AR531X_SDRAMCTL 0x18300000
-+#define AR531X_FLASHCTL 0x18400000
-+#define AR531X_APBBASE 0x1c000000
-+#define AR531X_FLASH 0x1e000000
-+#define AR531X_UART0 0xbc000003 /* UART MMR */
-+
-+/*
-+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
-+ * should be considered available. The AR5312 supports 2 enet MACS,
-+ * even though many reference boards only actually use 1 of them
-+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
-+ * The AR2312 supports 1 enet MAC.
-+ */
-+#define AR531X_NUM_ENET_MAC 2
-+
-+/*
-+ * Need these defines to determine true number of ethernet MACs
-+ */
-+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
-+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
-+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
-+#define AR531X_RADIO_MASK_OFF 0xc8
-+#define AR531X_RADIO0_MASK 0x0003
-+#define AR531X_RADIO1_MASK 0x000c
-+#define AR531X_RADIO1_S 2
-+
-+/*
-+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
-+ * should be considered available.
-+ */
-+#define AR531X_NUM_WMAC 2
-+
-+/* Reset/Timer Block Address Map */
-+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
-+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
-+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
-+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
-+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
-+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
-+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
-+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
-+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
-+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
-+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
-+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
-+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
-+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
-+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
-+
-+/* AR531X_WD_CTRL register bit field definitions */
-+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
-+#define AR531X_WD_CTRL_NMI 0x0001
-+#define AR531X_WD_CTRL_RESET 0x0002
-+
-+/* AR531X_ISR register bit field definitions */
-+#define AR531X_ISR_NONE 0x0000
-+#define AR531X_ISR_TIMER 0x0001
-+#define AR531X_ISR_AHBPROC 0x0002
-+#define AR531X_ISR_AHBDMA 0x0004
-+#define AR531X_ISR_GPIO 0x0008
-+#define AR531X_ISR_UART0 0x0010
-+#define AR531X_ISR_UART0DMA 0x0020
-+#define AR531X_ISR_WD 0x0040
-+#define AR531X_ISR_LOCAL 0x0080
-+
-+/* AR531X_RESET register bit field definitions */
-+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
-+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
-+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
-+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
-+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
-+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
-+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
-+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
-+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
-+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
-+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
-+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
-+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
-+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
-+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
-+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
-+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
-+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
-+
-+#define AR531X_RESET_WMAC0_BITS \
-+ AR531X_RESET_WLAN0 |\
-+ AR531X_RESET_WARM_WLAN0_MAC |\
-+ AR531X_RESET_WARM_WLAN0_BB
-+
-+#define AR531X_RESERT_WMAC1_BITS \
-+ AR531X_RESET_WLAN1 |\
-+ AR531X_RESET_WARM_WLAN1_MAC |\
-+ AR531X_RESET_WARM_WLAN1_BB
-+
-+/* AR5312_CLOCKCTL1 register bit field definitions */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-+
-+/* Valid for AR5312 and AR2312 */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-+
-+/* Valid for AR2313 */
-+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
-+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
-+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
-+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
-+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
-+
-+
-+/* AR531X_ENABLE register bit field definitions */
-+#define AR531X_ENABLE_WLAN0 0x0001
-+#define AR531X_ENABLE_ENET0 0x0002
-+#define AR531X_ENABLE_ENET1 0x0004
-+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
-+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
-+#define AR531X_ENABLE_WLAN1 \
-+ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
-+
-+/* AR531X_REV register bit field definitions */
-+#define AR531X_REV_WMAC_MAJ 0xf000
-+#define AR531X_REV_WMAC_MAJ_S 12
-+#define AR531X_REV_WMAC_MIN 0x0f00
-+#define AR531X_REV_WMAC_MIN_S 8
-+#define AR531X_REV_MAJ 0x00f0
-+#define AR531X_REV_MAJ_S 4
-+#define AR531X_REV_MIN 0x000f
-+#define AR531X_REV_MIN_S 0
-+#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
-+
-+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define AR531X_REV_MAJ_AR5312 0x4
-+#define AR531X_REV_MAJ_AR2313 0x5
-+
-+/* Minor revision numbers, bits 3..0 of Revision ID register */
-+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
-+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
-+
-+/* AR531X_FLASHCTL register bit field definitions */
-+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
-+#define FLASHCTL_IDCY_S 0
-+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
-+#define FLASHCTL_WST1_S 5
-+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
-+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
-+#define FLASHCTL_WST2_S 11
-+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
-+#define FLASHCTL_AC_S 16
-+#define FLASHCTL_AC_128K 0x00000000
-+#define FLASHCTL_AC_256K 0x00010000
-+#define FLASHCTL_AC_512K 0x00020000
-+#define FLASHCTL_AC_1M 0x00030000
-+#define FLASHCTL_AC_2M 0x00040000
-+#define FLASHCTL_AC_4M 0x00050000
-+#define FLASHCTL_AC_8M 0x00060000
-+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
-+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
-+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
-+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
-+#define FLASHCTL_WP 0x04000000 /* Write protect */
-+#define FLASHCTL_BM 0x08000000 /* Burst mode */
-+#define FLASHCTL_MW 0x30000000 /* Memory width */
-+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
-+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
-+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
-+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
-+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
-+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
-+
-+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
-+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
-+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
-+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
-+
-+/* ARM SDRAM Controller -- just enough to determine memory size */
-+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
-+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
-+#define MEM_CFG1_AC0_S 8
-+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
-+#define MEM_CFG1_AC1_S 12
-+
-+/* GPIO Address Map */
-+#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
-+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
-+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
-+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
-+
-+/* GPIO Control Register bit field definitions */
-+#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
-+#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
-+#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
-+#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
-+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
-+#define AR531X_NUM_GPIO 8
-+
-+
-+#endif
-+
---- /dev/null
-+++ b/arch/mips/ar231x/ar5312.c
-@@ -0,0 +1,549 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Platform devices for Atheros SoCs
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/leds.h>
-+#include <asm/bootinfo.h>
-+#include <asm/reboot.h>
-+#include <asm/time.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <gpio.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar5312_regs.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+
-+static void
-+ar5312_misc_irq_dispatch(void)
-+{
-+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR);
-+
-+ if (ar231x_misc_intrs & AR531X_ISR_TIMER) {
-+ do_IRQ(AR531X_MISC_IRQ_TIMER);
-+ (void)ar231x_read_reg(AR531X_TIMER);
-+ } else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC)
-+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-+ else if ((ar231x_misc_intrs & AR531X_ISR_UART0))
-+ do_IRQ(AR531X_MISC_IRQ_UART0);
-+ else if (ar231x_misc_intrs & AR531X_ISR_WD)
-+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-+ else
-+ do_IRQ(AR531X_MISC_IRQ_NONE);
-+}
-+
-+static asmlinkage void
-+ar5312_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP2)
-+ do_IRQ(AR5312_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP3)
-+ do_IRQ(AR5312_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR5312_IRQ_ENET1_INTRS);
-+ else if (pending & CAUSEF_IP5)
-+ do_IRQ(AR5312_IRQ_WLAN1_INTRS);
-+ else if (pending & CAUSEF_IP6)
-+ ar5312_misc_irq_dispatch();
-+ else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
-+}
-+
-+
-+/* Enable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar5312_misc_intr_enable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR531X_IMR);
-+ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-+ ar231x_write_reg(AR531X_IMR, imr);
-+}
-+
-+/* Disable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar5312_misc_intr_disable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR531X_IMR);
-+ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-+ ar231x_write_reg(AR531X_IMR, imr);
-+ ar231x_read_reg(AR531X_IMR); /* flush write buffer */
-+}
-+
-+static void
-+ar5312_misc_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar5312_misc_intr_enable(irq);
-+}
-+
-+static struct irq_chip ar5312_misc_intr_controller = {
-+ .name = "AR5312-MISC",
-+ .disable = ar5312_misc_intr_disable,
-+ .ack = ar5312_misc_intr_disable,
-+ .mask_ack = ar5312_misc_intr_disable,
-+ .mask = ar5312_misc_intr_disable,
-+ .unmask = ar5312_misc_intr_enable,
-+ .end = ar5312_misc_intr_end,
-+};
-+
-+
-+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ u32 proc1 = ar231x_read_reg(AR531X_PROC1);
-+ u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */
-+ u32 dma1 = ar231x_read_reg(AR531X_DMA1);
-+ u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR); /* clears error state */
-+
-+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
-+ procAddr, proc1, dmaAddr, dma1);
-+
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static struct irqaction ar5312_ahb_proc_interrupt = {
-+ .handler = ar5312_ahb_proc_handler,
-+ .flags = IRQF_DISABLED,
-+ .name = "ar5312_ahb_proc_interrupt",
-+};
-+
-+
-+static struct irqaction cascade = {
-+ .handler = no_action,
-+ .flags = IRQF_DISABLED,
-+ .name = "cascade",
-+};
-+
-+void __init ar5312_irq_init(void)
-+{
-+ int i;
-+
-+ if (!is_5312())
-+ return;
-+
-+ ar231x_irq_dispatch = ar5312_irq_dispatch;
-+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
-+ int irq = AR531X_MISC_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar5312_misc_intr_controller,
-+ handle_level_irq);
-+ }
-+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
-+ setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
-+}
-+
-+const struct ar231x_gpiodev ar5312_gpiodev;
-+
-+static u32
-+ar5312_gpio_get_output(void)
-+{
-+ u32 reg;
-+ reg = ~(ar231x_read_reg(AR531X_GPIO_CR));
-+ reg &= ar5312_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_set_output(u32 mask, u32 val)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR531X_GPIO_CR);
-+ reg |= mask;
-+ reg &= ~val;
-+ ar231x_write_reg(AR531X_GPIO_CR, reg);
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_get(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR531X_GPIO_DI);
-+ reg &= ar5312_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_set(u32 mask, u32 value)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR531X_GPIO_DO);
-+ reg &= ~mask;
-+ reg |= value;
-+ ar231x_write_reg(AR531X_GPIO_DO, reg);
-+ return reg;
-+}
-+
-+const struct ar231x_gpiodev ar5312_gpiodev = {
-+ .valid_mask = (1 << 8) - 1,
-+ .get_output = ar5312_gpio_get_output,
-+ .set_output = ar5312_gpio_set_output,
-+ .get = ar5312_gpio_get,
-+ .set = ar5312_gpio_set,
-+};
-+
-+static struct physmap_flash_data ar5312_flash_data = {
-+ .width = 2,
-+};
-+
-+static struct resource ar5312_flash_resource = {
-+ .start = AR531X_FLASH,
-+ .end = AR531X_FLASH + 0x800000 - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct ar231x_eth ar5312_eth0_data = {
-+ .reset_base = AR531X_RESET,
-+ .reset_mac = AR531X_RESET_ENET0,
-+ .reset_phy = AR531X_RESET_EPHY0,
-+ .phy_base = KSEG1ADDR(AR531X_ENET0),
-+ .config = &ar231x_board,
-+};
-+
-+static struct ar231x_eth ar5312_eth1_data = {
-+ .reset_base = AR531X_RESET,
-+ .reset_mac = AR531X_RESET_ENET1,
-+ .reset_phy = AR531X_RESET_EPHY1,
-+ .phy_base = KSEG1ADDR(AR531X_ENET1),
-+ .config = &ar231x_board,
-+};
-+
-+static struct platform_device ar5312_physmap_flash = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .dev.platform_data = &ar5312_flash_data,
-+ .resource = &ar5312_flash_resource,
-+ .num_resources = 1,
-+};
-+
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar5312_leds[] = {
-+ { .name = "wlan", .gpio = 0, .active_low = 1, },
-+};
-+
-+static const struct gpio_led_platform_data ar5312_led_data = {
-+ .num_leds = ARRAY_SIZE(ar5312_leds),
-+ .leds = (void *) ar5312_leds,
-+};
-+
-+static struct platform_device ar5312_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = (void *) &ar5312_led_data,
-+};
-+#endif
-+
-+/*
-+ * NB: This mapping size is larger than the actual flash size,
-+ * but this shouldn't be a problem here, because the flash
-+ * will simply be mapped multiple times.
-+ */
-+static char __init *ar5312_flash_limit(void)
-+{
-+ u32 ctl;
-+ /*
-+ * Configure flash bank 0.
-+ * Assume 8M window size. Flash will be aliased if it's smaller
-+ */
-+ ctl = FLASHCTL_E |
-+ FLASHCTL_AC_8M |
-+ FLASHCTL_RBLE |
-+ (0x01 << FLASHCTL_IDCY_S) |
-+ (0x07 << FLASHCTL_WST1_S) |
-+ (0x07 << FLASHCTL_WST2_S) |
-+ (ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW);
-+
-+ ar231x_write_reg(AR531X_FLASHCTL0, ctl);
-+
-+ /* Disable other flash banks */
-+ ar231x_write_reg(AR531X_FLASHCTL1,
-+ ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+ ar231x_write_reg(AR531X_FLASHCTL2,
-+ ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
-+}
-+
-+int __init ar5312_init_devices(void)
-+{
-+ struct ar231x_boarddata *config;
-+ u32 fctl = 0;
-+ const u8 *radio;
-+ u8 *c;
-+
-+ if (!is_5312())
-+ return 0;
-+
-+ /* Locate board/radio config data */
-+ ar231x_find_config(ar5312_flash_limit());
-+ config = ar231x_board.config;
-+
-+
-+ /*
-+ * Chip IDs and hardware detection for some Atheros
-+ * models are really broken!
-+ *
-+ * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
-+ * as indication for AR2312, which is otherwise
-+ * indistinguishable from the real AR5312.
-+ */
-+ if (ar231x_board.radio) {
-+ radio = ar231x_board.radio + AR531X_RADIO_MASK_OFF;
-+ if ((*((const u32 *) radio) & AR531X_RADIO0_MASK) == 0)
-+ config->flags |= BD_ISCASPER;
-+ } else
-+ radio = NULL;
-+
-+ /* AR2313 has CPU minor rev. 10 */
-+ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
-+ ar231x_devtype = DEV_TYPE_AR2313;
-+
-+ /* AR2312 shares the same Silicon ID as AR5312 */
-+ else if (config->flags & BD_ISCASPER)
-+ ar231x_devtype = DEV_TYPE_AR2312;
-+
-+ /* Everything else is probably AR5312 or compatible */
-+ else
-+ ar231x_devtype = DEV_TYPE_AR5312;
-+
-+ /* fixup flash width */
-+ fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW;
-+ switch (fctl) {
-+ case FLASHCTL_MWx16:
-+ ar5312_flash_data.width = 2;
-+ break;
-+ case FLASHCTL_MWx8:
-+ default:
-+ ar5312_flash_data.width = 1;
-+ break;
-+ }
-+
-+ platform_device_register(&ar5312_physmap_flash);
-+
-+#ifdef CONFIG_LEDS_GPIO
-+ ar5312_leds[0].gpio = config->sysLedGpio;
-+ platform_device_register(&ar5312_gpio_leds);
-+#endif
-+
-+ /* Fix up MAC addresses if necessary */
-+ if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6))
-+ memcpy(config->enet0_mac, config->enet1_mac, 6);
-+
-+ /* If ENET0 and ENET1 have the same mac address,
-+ * increment the one from ENET1 */
-+ if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) {
-+ c = config->enet1_mac + 5;
-+ while ((c >= config->enet1_mac) && !(++(*c)))
-+ c--;
-+ }
-+
-+ switch(ar231x_devtype) {
-+ case DEV_TYPE_AR5312:
-+ ar5312_eth0_data.macaddr = config->enet0_mac;
-+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
-+ AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data);
-+
-+ ar5312_eth1_data.macaddr = config->enet1_mac;
-+ ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1),
-+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
-+
-+ if (!ar231x_board.radio)
-+ return 0;
-+
-+ if ((*((u32 *) radio) & AR531X_RADIO0_MASK) &&
-+ (config->flags & BD_WLAN0))
-+ ar231x_add_wmac(0, AR531X_WLAN0,
-+ AR5312_IRQ_WLAN0_INTRS);
-+
-+ break;
-+ /*
-+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
-+ * of ENET1. Atheros calls it 'twisted' for a reason :)
-+ */
-+ case DEV_TYPE_AR2312:
-+ case DEV_TYPE_AR2313:
-+ ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base;
-+ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
-+ ar5312_eth1_data.macaddr = config->enet0_mac;
-+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1),
-+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
-+
-+ if (!ar231x_board.radio)
-+ return 0;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ if ((*((u32 *) radio) & AR531X_RADIO1_MASK) &&
-+ (config->flags & BD_WLAN1))
-+ ar231x_add_wmac(1, AR531X_WLAN1,
-+ AR5312_IRQ_WLAN1_INTRS);
-+
-+ return 0;
-+}
-+
-+
-+static void ar5312_restart(char *command)
-+{
-+ /* reset the system */
-+ local_irq_disable();
-+ while(1) {
-+ ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM);
-+ }
-+}
-+
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
-+
-+
-+static int __init
-+ar5312_cpu_frequency(void)
-+{
-+ unsigned int result;
-+ unsigned int predivide_mask, predivide_shift;
-+ unsigned int multiplier_mask, multiplier_shift;
-+ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
-+ unsigned int doubler_mask;
-+ u16 devid;
-+
-+ /* Trust the bootrom's idea of cpu frequency. */
-+ if ((result = ar231x_read_reg(AR5312_SCRATCH)))
-+ return result;
-+
-+ devid = ar231x_read_reg(AR531X_REV);
-+ devid &= AR531X_REV_MAJ;
-+ devid >>= AR531X_REV_MAJ_S;
-+ if (devid == AR531X_REV_MAJ_AR2313) {
-+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
-+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
-+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
-+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
-+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
-+ } else { /* AR5312 and AR2312 */
-+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
-+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
-+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
-+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
-+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
-+ }
-+
-+ /*
-+ * Clocking is derived from a fixed 40MHz input clock.
-+ *
-+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
-+ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
-+ * flash, Timer, Watchdog Timer)
-+ *
-+ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
-+ *
-+ * So, for example, with a PLL multiplier of 5, we have
-+ *
-+ * cpuFreq = 200MHz
-+ * sysFreq = 50MHz
-+ * cntFreq = 100MHz
-+ *
-+ * We compute the CPU frequency, based on PLL settings.
-+ */
-+
-+ clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1);
-+ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
-+ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
-+ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
-+
-+ if (clockCtl1 & doubler_mask) {
-+ multiplier = multiplier << 1;
-+ }
-+ return (40000000 / preDivisor) * multiplier;
-+}
-+
-+static inline int
-+ar5312_sys_frequency(void)
-+{
-+ return ar5312_cpu_frequency() / 4;
-+}
-+
-+void __init
-+ar5312_time_init(void)
-+{
-+ if (!is_5312())
-+ return;
-+
-+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
-+}
-+
-+
-+void __init
-+ar5312_prom_init(void)
-+{
-+ u32 memsize, memcfg, bank0AC, bank1AC;
-+ u32 devid;
-+
-+ if (!is_5312())
-+ return;
-+
-+ /* Detect memory size */
-+ memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
-+ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
-+ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
-+ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
-+ + (bank1AC ? (1 << (bank1AC+1)) : 0);
-+ memsize <<= 20;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ devid = ar231x_read_reg(AR531X_REV);
-+ devid >>= AR531X_REV_WMAC_MIN_S;
-+ devid &= AR531X_REV_CHIP;
-+ ar231x_board.devid = (u16) devid;
-+ ar231x_gpiodev = &ar5312_gpiodev;
-+}
-+
-+void __init
-+ar5312_plat_setup(void)
-+{
-+ if (!is_5312())
-+ return;
-+
-+ /* Clear any lingering AHB errors */
-+ ar231x_read_reg(AR531X_PROCADDR);
-+ ar231x_read_reg(AR531X_DMAADDR);
-+ ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
-+
-+ _machine_restart = ar5312_restart;
-+ ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
-+}
-+
---- /dev/null
-+++ b/arch/mips/ar231x/ar2315.c
-@@ -0,0 +1,658 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Platform devices for Atheros SoCs
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/delay.h>
-+#include <linux/leds.h>
-+#include <asm/bootinfo.h>
-+#include <asm/reboot.h>
-+#include <asm/time.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <asm/gpio.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar2315_regs.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar2315.h"
-+
-+static u32 gpiointmask = 0, gpiointval = 0;
-+
-+static inline void ar2315_gpio_irq(void)
-+{
-+ u32 pend;
-+ int bit = -1;
-+
-+ /* only do one gpio interrupt at a time */
-+ pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask;
-+
-+ if (pend) {
-+ bit = fls(pend) - 1;
-+ pend &= ~(1 << bit);
-+ gpiointval ^= (1 << bit);
-+ }
-+
-+ if (!pend)
-+ ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO);
-+
-+ /* Enable interrupt with edge detection */
-+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(bit)) != AR2315_GPIO_CR_I(bit))
-+ return;
-+
-+ if (bit >= 0)
-+ do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
-+}
-+
-+
-+/*
-+ * Called when an interrupt is received, this function
-+ * determines exactly which interrupt it was, and it
-+ * invokes the appropriate handler.
-+ *
-+ * Implicitly, we also define interrupt priority by
-+ * choosing which to dispatch first.
-+ */
-+static asmlinkage void
-+ar2315_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP3)
-+ do_IRQ(AR2315_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR2315_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP2) {
-+ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
-+
-+ if (misc_intr & AR2315_ISR_SPI)
-+ do_IRQ(AR531X_MISC_IRQ_SPI);
-+ else if (misc_intr & AR2315_ISR_TIMER)
-+ do_IRQ(AR531X_MISC_IRQ_TIMER);
-+ else if (misc_intr & AR2315_ISR_AHB)
-+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-+ else if (misc_intr & AR2315_ISR_GPIO)
-+ ar2315_gpio_irq();
-+ else if (misc_intr & AR2315_ISR_UART0)
-+ do_IRQ(AR531X_MISC_IRQ_UART0);
-+ else if (misc_intr & AR2315_ISR_WD)
-+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-+ else
-+ do_IRQ(AR531X_MISC_IRQ_NONE);
-+ } else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
-+}
-+
-+static void ar2315_set_gpiointmask(int gpio, int level)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR2315_GPIO_INT);
-+ reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M);
-+ reg |= gpio | AR2315_GPIO_INT_LVL(level);
-+ ar231x_write_reg(AR2315_GPIO_INT, reg);
-+}
-+
-+static void ar2315_gpio_intr_enable(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* Enable interrupt with edge detection */
-+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(gpio)) != AR2315_GPIO_CR_I(gpio))
-+ return;
-+
-+ gpiointmask |= (1 << gpio);
-+ ar2315_set_gpiointmask(gpio, 3);
-+}
-+
-+static unsigned int ar2315_gpio_intr_startup(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* reconfigure GPIO line as input */
-+ ar231x_mask_reg(AR2315_GPIO_CR, AR2315_GPIO_CR_M(gpio), AR2315_GPIO_CR_I(gpio));
-+ ar2315_gpio_intr_enable(irq);
-+ return 0;
-+}
-+
-+static void ar2315_gpio_intr_disable(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* Disable interrupt */
-+ gpiointmask &= ~(1 << gpio);
-+ ar2315_set_gpiointmask(gpio, 0);
-+}
-+
-+static void
-+ar2315_gpio_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar2315_gpio_intr_enable(irq);
-+}
-+
-+static struct irq_chip ar2315_gpio_intr_controller = {
-+ .typename = "AR2315-GPIO",
-+ .startup = ar2315_gpio_intr_startup,
-+ .ack = ar2315_gpio_intr_disable,
-+ .mask_ack = ar2315_gpio_intr_disable,
-+ .mask = ar2315_gpio_intr_disable,
-+ .unmask = ar2315_gpio_intr_enable,
-+ .end = ar2315_gpio_intr_end,
-+};
-+
-+static void
-+ar2315_misc_intr_enable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR2315_IMR);
-+ switch(irq) {
-+ case AR531X_MISC_IRQ_SPI:
-+ imr |= AR2315_ISR_SPI;
-+ break;
-+ case AR531X_MISC_IRQ_TIMER:
-+ imr |= AR2315_ISR_TIMER;
-+ break;
-+ case AR531X_MISC_IRQ_AHB_PROC:
-+ imr |= AR2315_ISR_AHB;
-+ break;
-+ case AR531X_MISC_IRQ_GPIO:
-+ imr |= AR2315_ISR_GPIO;
-+ break;
-+ case AR531X_MISC_IRQ_UART0:
-+ imr |= AR2315_ISR_UART0;
-+ break;
-+ case AR531X_MISC_IRQ_WATCHDOG:
-+ imr |= AR2315_ISR_WD;
-+ break;
-+ default:
-+ break;
-+ }
-+ ar231x_write_reg(AR2315_IMR, imr);
-+}
-+
-+static void
-+ar2315_misc_intr_disable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR2315_IMR);
-+ switch(irq) {
-+ case AR531X_MISC_IRQ_SPI:
-+ imr &= ~AR2315_ISR_SPI;
-+ break;
-+ case AR531X_MISC_IRQ_TIMER:
-+ imr &= ~AR2315_ISR_TIMER;
-+ break;
-+ case AR531X_MISC_IRQ_AHB_PROC:
-+ imr &= ~AR2315_ISR_AHB;
-+ break;
-+ case AR531X_MISC_IRQ_GPIO:
-+ imr &= ~AR2315_ISR_GPIO;
-+ break;
-+ case AR531X_MISC_IRQ_UART0:
-+ imr &= ~AR2315_ISR_UART0;
-+ break;
-+ case AR531X_MISC_IRQ_WATCHDOG:
-+ imr &= ~AR2315_ISR_WD;
-+ break;
-+ default:
-+ break;
-+ }
-+ ar231x_write_reg(AR2315_IMR, imr);
-+}
-+
-+static void
-+ar2315_misc_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar2315_misc_intr_enable(irq);
-+}
-+
-+
-+static struct irq_chip ar2315_misc_intr_controller = {
-+ .typename = "AR2315-MISC",
-+ .ack = ar2315_misc_intr_disable,
-+ .mask_ack = ar2315_misc_intr_disable,
-+ .mask = ar2315_misc_intr_disable,
-+ .unmask = ar2315_misc_intr_enable,
-+ .end = ar2315_misc_intr_end,
-+};
-+
-+static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
-+ ar231x_read_reg(AR2315_AHB_ERR1);
-+
-+ printk(KERN_ERR "AHB fatal error\n");
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction ar2315_ahb_proc_interrupt = {
-+ .handler = ar2315_ahb_proc_handler,
-+ .flags = IRQF_DISABLED,
-+ .name = "ar2315_ahb_proc_interrupt",
-+};
-+
-+static struct irqaction cascade = {
-+ .handler = no_action,
-+ .flags = IRQF_DISABLED,
-+ .name = "cascade",
-+};
-+
-+void
-+ar2315_irq_init(void)
-+{
-+ int i;
-+
-+ if (!is_2315())
-+ return;
-+
-+ ar231x_irq_dispatch = ar2315_irq_dispatch;
-+ gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
-+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
-+ int irq = AR531X_MISC_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar2315_misc_intr_controller,
-+ handle_level_irq);
-+ }
-+ for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) {
-+ int irq = AR531X_GPIO_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar2315_gpio_intr_controller,
-+ handle_level_irq);
-+ }
-+ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
-+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt);
-+ setup_irq(AR2315_IRQ_MISC_INTRS, &cascade);
-+}
-+
-+const struct ar231x_gpiodev ar2315_gpiodev;
-+
-+static u32
-+ar2315_gpio_get_output(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_CR);
-+ reg &= ar2315_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_set_output(u32 mask, u32 val)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR2315_GPIO_CR);
-+ reg &= ~mask;
-+ reg |= val;
-+ ar231x_write_reg(AR2315_GPIO_CR, reg);
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_get(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_DI);
-+ reg &= ar2315_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_set(u32 mask, u32 value)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_DO);
-+ reg &= ~mask;
-+ reg |= value;
-+ ar231x_write_reg(AR2315_GPIO_DO, reg);
-+ return reg;
-+}
-+
-+const struct ar231x_gpiodev ar2315_gpiodev = {
-+ .valid_mask = (1 << 22) - 1,
-+ .get_output = ar2315_gpio_get_output,
-+ .set_output = ar2315_gpio_set_output,
-+ .get = ar2315_gpio_get,
-+ .set = ar2315_gpio_set,
-+};
-+
-+static struct ar231x_eth ar2315_eth_data = {
-+ .reset_base = AR2315_RESET,
-+ .reset_mac = AR2315_RESET_ENET0,
-+ .reset_phy = AR2315_RESET_EPHY0,
-+ .phy_base = AR2315_ENET0,
-+ .config = &ar231x_board,
-+};
-+
-+static struct resource ar2315_spiflash_res[] = {
-+ {
-+ .name = "flash_base",
-+ .flags = IORESOURCE_MEM,
-+ .start = KSEG1ADDR(AR2315_SPI_READ),
-+ .end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1,
-+ },
-+ {
-+ .name = "flash_regs",
-+ .flags = IORESOURCE_MEM,
-+ .start = 0x11300000,
-+ .end = 0x11300012,
-+ },
-+};
-+
-+static struct platform_device ar2315_spiflash = {
-+ .id = 0,
-+ .name = "spiflash",
-+ .resource = ar2315_spiflash_res,
-+ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
-+};
-+
-+static struct platform_device ar2315_wdt = {
-+ .id = 0,
-+ .name = "ar2315_wdt",
-+};
-+
-+#define SPI_FLASH_CTL 0x00
-+#define SPI_FLASH_OPCODE 0x04
-+#define SPI_FLASH_DATA 0x08
-+
-+static inline u32
-+spiflash_read_reg(int reg)
-+{
-+ return ar231x_read_reg(KSEG1ADDR(AR2315_SPI) + reg);
-+}
-+
-+static inline void
-+spiflash_write_reg(int reg, u32 data)
-+{
-+ ar231x_write_reg(KSEG1ADDR(AR2315_SPI) + reg, data);
-+}
-+
-+static u32
-+spiflash_wait_status(void)
-+{
-+ u32 reg;
-+
-+ do {
-+ reg = spiflash_read_reg(SPI_FLASH_CTL);
-+ } while (reg & SPI_CTL_BUSY);
-+
-+ return reg;
-+}
-+
-+static u8
-+spiflash_probe(void)
-+{
-+ u32 reg;
-+
-+ reg = spiflash_wait_status();
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= (1 << 4) | 4 | SPI_CTL_START;
-+
-+ spiflash_write_reg(SPI_FLASH_OPCODE, 0xab);
-+ spiflash_write_reg(SPI_FLASH_CTL, reg);
-+
-+ reg = spiflash_wait_status();
-+ reg = spiflash_read_reg(SPI_FLASH_DATA);
-+ reg &= 0xff;
-+
-+ return (u8) reg;
-+}
-+
-+
-+#define STM_8MBIT_SIGNATURE 0x13
-+#define STM_16MBIT_SIGNATURE 0x14
-+#define STM_32MBIT_SIGNATURE 0x15
-+#define STM_64MBIT_SIGNATURE 0x16
-+#define STM_128MBIT_SIGNATURE 0x17
-+
-+static u8 __init *
-+ar2315_flash_limit(void)
-+{
-+ u32 flash_size = 0;
-+
-+ /* probe the flash chip size */
-+ switch(spiflash_probe()) {
-+ case STM_8MBIT_SIGNATURE:
-+ flash_size = 0x00100000;
-+ break;
-+ case STM_16MBIT_SIGNATURE:
-+ flash_size = 0x00200000;
-+ break;
-+ case STM_32MBIT_SIGNATURE:
-+ flash_size = 0x00400000;
-+ break;
-+ case STM_64MBIT_SIGNATURE:
-+ flash_size = 0x00800000;
-+ break;
-+ case STM_128MBIT_SIGNATURE:
-+ flash_size = 0x01000000;
-+ break;
-+ }
-+
-+ ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start +
-+ flash_size - 1;
-+ return (u8 *) ar2315_spiflash_res[0].end + 1;
-+}
-+
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar2315_leds[6];
-+static struct gpio_led_platform_data ar2315_led_data = {
-+ .leds = (void *) ar2315_leds,
-+};
-+
-+static struct platform_device ar2315_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = (void *) &ar2315_led_data,
-+ }
-+};
-+
-+static void __init
-+ar2315_init_gpio(void)
-+{
-+ static char led_names[6][6];
-+ int i, led = 0;
-+
-+ ar2315_led_data.num_leds = 0;
-+ for(i = 1; i < 8; i++)
-+ {
-+ if((i == AR2315_RESET_GPIO) ||
-+ (i == ar231x_board.config->resetConfigGpio))
-+ continue;
-+
-+ if(i == ar231x_board.config->sysLedGpio)
-+ strcpy(led_names[led], "wlan");
-+ else
-+ sprintf(led_names[led], "gpio%d", i);
-+
-+ ar2315_leds[led].name = led_names[led];
-+ ar2315_leds[led].gpio = i;
-+ ar2315_leds[led].active_low = 0;
-+ led++;
-+ }
-+ ar2315_led_data.num_leds = led;
-+ platform_device_register(&ar2315_gpio_leds);
-+}
-+#else
-+static inline void ar2315_init_gpio(void)
-+{
-+}
-+#endif
-+
-+int __init
-+ar2315_init_devices(void)
-+{
-+ if (!is_2315())
-+ return 0;
-+
-+ /* Find board configuration */
-+ ar231x_find_config(ar2315_flash_limit());
-+ ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
-+
-+ ar2315_init_gpio();
-+ platform_device_register(&ar2315_wdt);
-+ platform_device_register(&ar2315_spiflash);
-+ ar231x_add_ethernet(0, AR2315_ENET0, AR2315_IRQ_ENET0_INTRS,
-+ &ar2315_eth_data);
-+ ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
-+
-+ return 0;
-+}
-+
-+static void
-+ar2315_restart(char *command)
-+{
-+ void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
-+
-+ local_irq_disable();
-+
-+ /* try reset the system via reset control */
-+ ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM);
-+
-+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
-+ * give it some time to attempt a gpio based hardware reset
-+ * (atheros reference design workaround) */
-+ gpio_direction_output(AR2315_RESET_GPIO, 0);
-+ mdelay(100);
-+
-+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
-+ * workaround. Attempt to jump to the mips reset location -
-+ * the boot loader itself might be able to recover the system */
-+ mips_reset_vec();
-+}
-+
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
-+static int __initdata PLLC_DIVIDE_TABLE[5] = { 2, 3, 4, 6, 3 };
-+
-+static unsigned int __init
-+ar2315_sys_clk(unsigned int clockCtl)
-+{
-+ unsigned int pllcCtrl,cpuDiv;
-+ unsigned int pllcOut,refdiv,fdiv,divby2;
-+ unsigned int clkDiv;
-+
-+ pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL);
-+ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
-+ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
-+ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
-+ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
-+ divby2 += 1;
-+ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
-+
-+
-+ /* clkm input selected */
-+ switch(clockCtl & CPUCLK_CLK_SEL_M) {
-+ case 0:
-+ case 1:
-+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
-+ break;
-+ case 2:
-+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
-+ break;
-+ default:
-+ pllcOut = 40000000;
-+ clkDiv = 1;
-+ break;
-+ }
-+ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
-+ cpuDiv = cpuDiv * 2 ?: 1;
-+ return (pllcOut/(clkDiv * cpuDiv));
-+}
-+
-+static inline unsigned int
-+ar2315_cpu_frequency(void)
-+{
-+ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK));
-+}
-+
-+static inline unsigned int
-+ar2315_apb_frequency(void)
-+{
-+ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK));
-+}
-+
-+void __init
-+ar2315_time_init(void)
-+{
-+ if (!is_2315())
-+ return;
-+
-+ mips_hpt_frequency = ar2315_cpu_frequency() / 2;
-+}
-+
-+void __init
-+ar2315_prom_init(void)
-+{
-+ u32 memsize, memcfg, devid;
-+
-+ if (!is_2315())
-+ return;
-+
-+ memcfg = ar231x_read_reg(AR2315_MEM_CFG);
-+ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
-+ memsize <<= 3;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ /* Detect the hardware based on the device ID */
-+ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP;
-+ switch(devid) {
-+ case 0x90:
-+ case 0x91:
-+ ar231x_devtype = DEV_TYPE_AR2317;
-+ break;
-+ default:
-+ ar231x_devtype = DEV_TYPE_AR2315;
-+ break;
-+ }
-+ ar231x_gpiodev = &ar2315_gpiodev;
-+ ar231x_board.devid = devid;
-+}
-+
-+void __init
-+ar2315_plat_setup(void)
-+{
-+ u32 config;
-+
-+ if (!is_2315())
-+ return;
-+
-+ /* Clear any lingering AHB errors */
-+ config = read_c0_config();
-+ write_c0_config(config & ~0x3);
-+ ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET);
-+ ar231x_read_reg(AR2315_AHB_ERR1);
-+ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
-+
-+ _machine_restart = ar2315_restart;
-+ ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency());
-+}
---- /dev/null
-+++ b/arch/mips/ar231x/ar2315.h
-@@ -0,0 +1,37 @@
-+#ifndef __AR2315_H
-+#define __AR2315_H
-+
-+#ifdef CONFIG_ATHEROS_AR2315
-+
-+extern void ar2315_irq_init(void);
-+extern int ar2315_init_devices(void);
-+extern void ar2315_prom_init(void);
-+extern void ar2315_plat_setup(void);
-+extern void ar2315_time_init(void);
-+
-+#else
-+
-+static inline void ar2315_irq_init(void)
-+{
-+}
-+
-+static inline int ar2315_init_devices(void)
-+{
-+ return 0;
-+}
-+
-+static inline void ar2315_prom_init(void)
-+{
-+}
-+
-+static inline void ar2315_plat_setup(void)
-+{
-+}
-+
-+static inline void ar2315_time_init(void)
-+{
-+}
-+
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/ar5312.h
-@@ -0,0 +1,38 @@
-+#ifndef __AR5312_H
-+#define __AR5312_H
-+
-+#ifdef CONFIG_ATHEROS_AR5312
-+
-+extern void ar5312_irq_init(void);
-+extern int ar5312_init_devices(void);
-+extern void ar5312_prom_init(void);
-+extern void ar5312_plat_setup(void);
-+extern void ar5312_time_init(void);
-+extern void ar5312_time_init(void);
-+
-+#else
-+
-+static inline void ar5312_irq_init(void)
-+{
-+}
-+
-+static inline int ar5312_init_devices(void)
-+{
-+ return 0;
-+}
-+
-+static inline void ar5312_prom_init(void)
-+{
-+}
-+
-+static inline void ar5312_plat_setup(void)
-+{
-+}
-+
-+static inline void ar5312_time_init(void)
-+{
-+}
-+
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar231x.h
-@@ -0,0 +1,54 @@
-+#ifndef __AR531X_H
-+#define __AR531X_H
-+
-+#define AR531X_MISC_IRQ_BASE 0x20
-+#define AR531X_GPIO_IRQ_BASE 0x30
-+
-+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
-+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
-+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-+
-+/* Miscellaneous interrupts, which share IP6 */
-+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
-+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
-+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
-+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
-+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
-+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
-+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
-+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
-+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
-+#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9
-+#define AR531X_MISC_IRQ_COUNT 10
-+
-+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
-+#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0
-+#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n
-+#define AR531X_GPIO_IRQ_COUNT 22
-+
-+static inline u32
-+ar231x_read_reg(u32 reg)
-+{
-+ return __raw_readl((u32 *) KSEG1ADDR(reg));
-+}
-+
-+static inline void
-+ar231x_write_reg(u32 reg, u32 val)
-+{
-+ __raw_writel(val, (u32 *) KSEG1ADDR(reg));
-+}
-+
-+static inline u32
-+ar231x_mask_reg(u32 reg, u32 mask, u32 val)
-+{
-+ u32 ret;
-+
-+ ret = ar231x_read_reg(reg);
-+ ret &= ~mask;
-+ ret |= val;
-+ ar231x_write_reg(reg, ret);
-+
-+ return ret;
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/devices.h
-@@ -0,0 +1,37 @@
-+#ifndef __AR231X_DEVICES_H
-+#define __AR231X_DEVICES_H
-+
-+enum {
-+ /* handled by ar5312.c */
-+ DEV_TYPE_AR2312,
-+ DEV_TYPE_AR2313,
-+ DEV_TYPE_AR5312,
-+
-+ /* handled by ar2315.c */
-+ DEV_TYPE_AR2315,
-+ DEV_TYPE_AR2316,
-+ DEV_TYPE_AR2317,
-+
-+ DEV_TYPE_UNKNOWN
-+};
-+
-+extern int ar231x_devtype;
-+extern struct ar231x_board_config ar231x_board;
-+extern asmlinkage void (*ar231x_irq_dispatch)(void);
-+
-+extern int ar231x_find_config(u8 *flash_limit);
-+extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk);
-+extern int ar231x_add_wmac(int nr, u32 base, int irq);
-+extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata);
-+
-+static inline bool is_2315(void)
-+{
-+ return (current_cpu_data.cputype == CPU_4KEC);
-+}
-+
-+static inline bool is_5312(void)
-+{
-+ return !is_2315();
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/devices.c
-@@ -0,0 +1,175 @@
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial_8250.h>
-+#include <linux/platform_device.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+struct ar231x_board_config ar231x_board;
-+int ar231x_devtype = DEV_TYPE_UNKNOWN;
-+const struct ar231x_gpiodev *ar231x_gpiodev;
-+EXPORT_SYMBOL(ar231x_gpiodev);
-+
-+static struct resource ar231x_eth0_res[] = {
-+ {
-+ .name = "eth0_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth0_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct resource ar231x_eth1_res[] = {
-+ {
-+ .name = "eth1_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth1_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device ar231x_eth[] = {
-+ {
-+ .id = 0,
-+ .name = "ar231x-eth",
-+ .resource = ar231x_eth0_res,
-+ .num_resources = ARRAY_SIZE(ar231x_eth0_res)
-+ },
-+ {
-+ .id = 1,
-+ .name = "ar231x-eth",
-+ .resource = ar231x_eth1_res,
-+ .num_resources = ARRAY_SIZE(ar231x_eth1_res)
-+ }
-+};
-+
-+static struct resource ar231x_wmac0_res[] = {
-+ {
-+ .name = "wmac0_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "wmac0_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct resource ar231x_wmac1_res[] = {
-+ {
-+ .name = "wmac1_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "wmac1_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+
-+static struct platform_device ar231x_wmac[] = {
-+ {
-+ .id = 0,
-+ .name = "ar231x-wmac",
-+ .resource = ar231x_wmac0_res,
-+ .num_resources = ARRAY_SIZE(ar231x_wmac0_res),
-+ .dev.platform_data = &ar231x_board,
-+ },
-+ {
-+ .id = 1,
-+ .name = "ar231x-wmac",
-+ .resource = ar231x_wmac1_res,
-+ .num_resources = ARRAY_SIZE(ar231x_wmac1_res),
-+ .dev.platform_data = &ar231x_board,
-+ },
-+};
-+
-+static const char *devtype_strings[] = {
-+ [DEV_TYPE_AR5312] = "Atheros AR5312",
-+ [DEV_TYPE_AR2312] = "Atheros AR2312",
-+ [DEV_TYPE_AR2313] = "Atheros AR2313",
-+ [DEV_TYPE_AR2315] = "Atheros AR2315",
-+ [DEV_TYPE_AR2316] = "Atheros AR2316",
-+ [DEV_TYPE_AR2317] = "Atheros AR2317",
-+ [DEV_TYPE_UNKNOWN] = "Atheros (unknown)",
-+};
-+
-+const char *get_system_type(void)
-+{
-+ if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) ||
-+ !devtype_strings[ar231x_devtype])
-+ return devtype_strings[DEV_TYPE_UNKNOWN];
-+ return devtype_strings[ar231x_devtype];
-+}
-+
-+
-+int __init
-+ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata)
-+{
-+ struct resource *res;
-+
-+ ar231x_eth[nr].dev.platform_data = pdata;
-+ res = &ar231x_eth[nr].resource[0];
-+ res->start = base;
-+ res->end = base + 0x2000 - 1;
-+ res++;
-+ res->start = irq;
-+ res->end = irq;
-+ return platform_device_register(&ar231x_eth[nr]);
-+}
-+
-+void __init
-+ar231x_serial_setup(u32 mapbase, unsigned int uartclk)
-+{
-+ struct uart_port s;
-+
-+ memset(&s, 0, sizeof(s));
-+
-+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-+ s.iotype = UPIO_MEM;
-+ s.irq = AR531X_MISC_IRQ_UART0;
-+ s.regshift = 2;
-+ s.mapbase = mapbase;
-+ s.uartclk = uartclk;
-+ s.membase = (void __iomem *)s.mapbase;
-+
-+ early_serial_setup(&s);
-+}
-+
-+int __init
-+ar231x_add_wmac(int nr, u32 base, int irq)
-+{
-+ struct resource *res;
-+
-+ ar231x_wmac[nr].dev.platform_data = &ar231x_board;
-+ res = &ar231x_wmac[nr].resource[0];
-+ res->start = base;
-+ res->end = base + 0x10000 - 1;
-+ res++;
-+ res->start = irq;
-+ res->end = irq;
-+ return platform_device_register(&ar231x_wmac[nr]);
-+}
-+
-+static int __init ar231x_register_devices(void)
-+{
-+ static struct resource res = {
-+ .start = 0xFFFFFFFF,
-+ };
-+
-+ platform_device_register_simple("GPIODEV", 0, &res, 1);
-+ ar5312_init_devices();
-+ ar2315_init_devices();
-+
-+ return 0;
-+}
-+
-+device_initcall(ar231x_register_devices);
diff --git a/target/linux/atheros/patches-2.6.34/101-early-printk-support.patch b/target/linux/atheros/patches-2.6.34/101-early-printk-support.patch
deleted file mode 100644
index 8feec4c678..0000000000
--- a/target/linux/atheros/patches-2.6.34/101-early-printk-support.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- /dev/null
-+++ b/arch/mips/ar231x/early_printk.c
-@@ -0,0 +1,44 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ */
-+
-+#include <linux/mm.h>
-+#include <linux/io.h>
-+#include <linux/serial_reg.h>
-+#include <asm/addrspace.h>
-+
-+#include <asm/mach-ar231x/ar2315_regs.h>
-+#include <asm/mach-ar231x/ar5312_regs.h>
-+#include "devices.h"
-+
-+static inline void prom_uart_wr(void __iomem *base, unsigned reg,
-+ unsigned char ch)
-+{
-+ __raw_writeb(ch, base + 4 * reg);
-+}
-+
-+static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg)
-+{
-+ return __raw_readb(base + 4 * reg);
-+}
-+
-+void prom_putchar(unsigned char ch)
-+{
-+ static void __iomem *base;
-+
-+ if (unlikely(base == NULL)) {
-+ if (is_2315())
-+ base = (void __iomem *)(KSEG1ADDR(AR2315_UART0));
-+ else
-+ base = (void __iomem *)(KSEG1ADDR(AR531X_UART0));
-+ }
-+
-+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
-+ prom_uart_wr(base, UART_TX, ch);
-+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
-+}
-+
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -9,5 +9,8 @@
- #
-
- obj-y += board.o prom.o devices.o
-+
-+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-+
- obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
- obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -94,6 +94,7 @@ config ATHEROS_AR231X
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_32BIT_KERNEL
- select GENERIC_GPIO
-+ select SYS_HAS_EARLY_PRINTK
- help
- Support for AR231x and AR531x based boards
-
diff --git a/target/linux/atheros/patches-2.6.34/105-ar2315_pci.patch b/target/linux/atheros/patches-2.6.34/105-ar2315_pci.patch
deleted file mode 100644
index 3f5e6b4528..0000000000
--- a/target/linux/atheros/patches-2.6.34/105-ar2315_pci.patch
+++ /dev/null
@@ -1,297 +0,0 @@
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -14,3 +14,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin
-
- obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
- obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
-+obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o
---- /dev/null
-+++ b/arch/mips/ar231x/pci.c
-@@ -0,0 +1,230 @@
-+/*
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/spinlock.h>
-+#include <linux/delay.h>
-+#include <linux/irq.h>
-+#include <asm/bootinfo.h>
-+#include <asm/paccess.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/io.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include <ar2315_regs.h>
-+#include "devices.h"
-+
-+#define AR531X_MEM_BASE 0x80800000UL
-+#define AR531X_MEM_SIZE 0x00ffffffUL
-+#define AR531X_IO_SIZE 0x00007fffUL
-+
-+static unsigned long configspace;
-+
-+static int config_access(int devfn, int where, int size, u32 *ptr, bool write)
-+{
-+ unsigned long flags;
-+ int func = PCI_FUNC(devfn);
-+ int dev = PCI_SLOT(devfn);
-+ u32 value = 0;
-+ int err = 0;
-+ u32 addr;
-+
-+ if (((dev != 0) && (dev != 3)) || (func > 2))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ /* Select Configuration access */
-+ local_irq_save(flags);
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, 0, AR2315_PCIMISC_CFG_SEL);
-+ mb();
-+
-+ addr = (u32) configspace + (1 << (13 + dev)) + (func << 8) + where;
-+ if (size == 1)
-+ addr ^= 0x3;
-+ else if (size == 2)
-+ addr ^= 0x2;
-+
-+ if (write) {
-+ value = *ptr;
-+ if (size == 1)
-+ err = put_dbe(value, (u8 *) addr);
-+ else if (size == 2)
-+ err = put_dbe(value, (u16 *) addr);
-+ else if (size == 4)
-+ err = put_dbe(value, (u32 *) addr);
-+ } else {
-+ if (size == 1)
-+ err = get_dbe(value, (u8 *) addr);
-+ else if (size == 2)
-+ err = get_dbe(value, (u16 *) addr);
-+ else if (size == 4)
-+ err = get_dbe(value, (u32 *) addr);
-+ if (err)
-+ *ptr = 0xffffffff;
-+ else
-+ *ptr = value;
-+ }
-+
-+ /* Select Memory access */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_CFG_SEL, 0);
-+ local_irq_restore(flags);
-+
-+ return (err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL);
-+}
-+
-+static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
-+{
-+ return config_access(devfn, where, size, value, 0);
-+}
-+
-+static int ar231x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-+{
-+ return config_access(devfn, where, size, &value, 1);
-+}
-+
-+struct pci_ops ar231x_pci_ops = {
-+ .read = ar231x_pci_read,
-+ .write = ar231x_pci_write,
-+};
-+
-+static struct resource ar231x_mem_resource = {
-+ .name = "AR531x PCI MEM",
-+ .start = AR531X_MEM_BASE,
-+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource ar231x_io_resource = {
-+ .name = "AR531x PCI I/O",
-+ .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
-+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+struct pci_controller ar231x_pci_controller = {
-+ .pci_ops = &ar231x_pci_ops,
-+ .mem_resource = &ar231x_mem_resource,
-+ .io_resource = &ar231x_io_resource,
-+ .mem_offset = 0x00000000UL,
-+ .io_offset = 0x00000000UL,
-+};
-+
-+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return AR2315_IRQ_LCBUS_PCI;
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
-+ pci_write_config_word(dev, 0x40, 0);
-+
-+ /* Clear any pending Abort or external Interrupts
-+ * and enable interrupt processing */
-+ ar231x_mask_reg(AR2315_PCI_INTEN_REG, AR2315_PCI_INT_ENABLE, 0);
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
-+ ar231x_write_reg(AR2315_PCI_INT_MASK, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
-+ ar231x_mask_reg(AR2315_PCI_INTEN_REG, 0, AR2315_PCI_INT_ENABLE);
-+
-+ return 0;
-+}
-+
-+static void
-+ar2315_pci_fixup(struct pci_dev *dev)
-+{
-+ unsigned int devfn = dev->devfn;
-+
-+ if (dev->bus->number != 0)
-+ return;
-+
-+ /* Only fix up the PCI host settings */
-+ if ((PCI_SLOT(devfn) != 3) || (PCI_FUNC(devfn) != 0))
-+ return;
-+
-+ /* Fix up MBARs */
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, HOST_PCI_MBAR0);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, HOST_PCI_MBAR1);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, HOST_PCI_MBAR2);
-+ pci_write_config_dword(dev, PCI_COMMAND,
-+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL |
-+ PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR |
-+ PCI_COMMAND_FAST_BACK);
-+}
-+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar2315_pci_fixup);
-+
-+static int __init
-+ar2315_pci_init(void)
-+{
-+ u32 reg;
-+
-+ if (ar231x_devtype != DEV_TYPE_AR2315)
-+ return -ENODEV;
-+
-+ configspace = (unsigned long) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
-+ ar231x_pci_controller.io_map_base =
-+ (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE);
-+ set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space */
-+
-+ reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
-+ msleep(10);
-+
-+ reg &= ~AR2315_RESET_PCIDMA;
-+ ar231x_write_reg(AR2315_RESET, reg);
-+ msleep(10);
-+
-+ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0,
-+ AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE);
-+
-+ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
-+ (AR2315_PCICLK_IN_FREQ_DIV_6 << AR2315_PCICLK_DIV_S));
-+ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
-+ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | AR2315_IF_MASK,
-+ AR2315_IF_PCI | AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
-+ (AR2315_IF_PCI_CLK_OUTPUT_CLK << AR2315_IF_PCI_CLK_SHIFT));
-+
-+ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
-+ AR2315_PCIRST_LOW);
-+ msleep(100);
-+
-+ /* Bring the PCI out of reset */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
-+ AR2315_PCIRST_HIGH | AR2315_PCICACHE_DIS | 0x8);
-+
-+ ar231x_write_reg(AR2315_PCI_UNCACHE_CFG,
-+ 0x1E | /* 1GB uncached */
-+ (1 << 5) | /* Enable uncached */
-+ (0x2 << 30) /* Base: 0x80000000 */
-+ );
-+ ar231x_read_reg(AR2315_PCI_UNCACHE_CFG);
-+
-+ msleep(500);
-+
-+ /* dirty hack - anyone with a datasheet that knows the memory map ? */
-+ ioport_resource.start = 0x10000000;
-+ ioport_resource.end = 0xffffffff;
-+ iomem_resource.start = 0x10000000;
-+ iomem_resource.end = 0xffffffff;
-+
-+ register_pci_controller(&ar231x_pci_controller);
-+
-+ return 0;
-+}
-+
-+arch_initcall(ar2315_pci_init);
---- a/arch/mips/ar231x/Kconfig
-+++ b/arch/mips/ar231x/Kconfig
-@@ -15,3 +15,13 @@ config ATHEROS_AR2315
- select SYS_SUPPORTS_BIG_ENDIAN
- select GENERIC_GPIO
- default y
-+
-+config ATHEROS_AR2315_PCI
-+ bool "PCI support"
-+ depends on ATHEROS_AR2315
-+ select HW_HAS_PCI
-+ select PCI
-+ select USB_ARCH_HAS_HCD
-+ select USB_ARCH_HAS_OHCI
-+ select USB_ARCH_HAS_EHCI
-+ default y
---- a/arch/mips/ar231x/ar2315.c
-+++ b/arch/mips/ar231x/ar2315.c
-@@ -63,6 +63,27 @@ static inline void ar2315_gpio_irq(void)
- do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
- }
-
-+#ifdef CONFIG_ATHEROS_AR2315_PCI
-+static inline void pci_abort_irq(void)
-+{
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_ABORT_INT);
-+}
-+
-+static inline void pci_ack_irq(void)
-+{
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_EXT_INT);
-+}
-+
-+void ar2315_pci_irq(int irq)
-+{
-+ if (ar231x_read_reg(AR2315_PCI_INT_STATUS) == AR2315_PCI_ABORT_INT)
-+ pci_abort_irq();
-+ else {
-+ do_IRQ(irq);
-+ pci_ack_irq();
-+ }
-+}
-+#endif /* CONFIG_ATHEROS_AR2315_PCI */
-
- /*
- * Called when an interrupt is received, this function
-@@ -81,6 +102,10 @@ ar2315_irq_dispatch(void)
- do_IRQ(AR2315_IRQ_WLAN0_INTRS);
- else if (pending & CAUSEF_IP4)
- do_IRQ(AR2315_IRQ_ENET0_INTRS);
-+#ifdef CONFIG_ATHEROS_AR2315_PCI
-+ else if (pending & CAUSEF_IP5)
-+ ar2315_pci_irq(AR2315_IRQ_LCBUS_PCI);
-+#endif
- else if (pending & CAUSEF_IP2) {
- unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
-
diff --git a/target/linux/atheros/patches-2.6.34/110-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.34/110-ar2313_ethernet.patch
deleted file mode 100644
index 2dfef958f9..0000000000
--- a/target/linux/atheros/patches-2.6.34/110-ar2313_ethernet.patch
+++ /dev/null
@@ -1,1611 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -371,6 +371,12 @@ config AX88796_93CX6
- help
- Select this if your platform comes with an external 93CX6 eeprom.
-
-+config AR231X_ETHERNET
-+ tristate "AR231x Ethernet support"
-+ depends on ATHEROS_AR231X
-+ help
-+ Support for the AR231x/531x ethernet controller
-+
- config MACE
- tristate "MACE (Power Mac ethernet) support"
- depends on PPC_PMAC && PPC32
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -221,6 +221,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
- obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
-+obj-$(CONFIG_AR231X_ETHERNET) += ar231x.o
- obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
- obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
- obj-$(CONFIG_DECLANCE) += declance.o
---- /dev/null
-+++ b/drivers/net/ar231x.c
-@@ -0,0 +1,1278 @@
-+/*
-+ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Additional credits:
-+ * This code is taken from John Taylor's Sibyte driver and then
-+ * modified for the AR2313.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+#include <linux/sockios.h>
-+#include <linux/pkt_sched.h>
-+#include <linux/mii.h>
-+#include <linux/phy.h>
-+#include <linux/ethtool.h>
-+#include <linux/ctype.h>
-+#include <linux/platform_device.h>
-+
-+#include <net/sock.h>
-+#include <net/ip.h>
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/byteorder.h>
-+#include <asm/uaccess.h>
-+#include <asm/bootinfo.h>
-+
-+#define AR2313_MTU 1692
-+#define AR2313_PRIOS 1
-+#define AR2313_QUEUES (2*AR2313_PRIOS)
-+#define AR2313_DESCR_ENTRIES 64
-+
-+
-+#ifndef min
-+#define min(a,b) (((a)<(b))?(a):(b))
-+#endif
-+
-+#ifndef SMP_CACHE_BYTES
-+#define SMP_CACHE_BYTES L1_CACHE_BYTES
-+#endif
-+
-+#define AR2313_MBOX_SET_BIT 0x8
-+
-+#include "ar231x.h"
-+
-+/*
-+ * New interrupt handler strategy:
-+ *
-+ * An old interrupt handler worked using the traditional method of
-+ * replacing an skbuff with a new one when a packet arrives. However
-+ * the rx rings do not need to contain a static number of buffer
-+ * descriptors, thus it makes sense to move the memory allocation out
-+ * of the main interrupt handler and do it in a bottom half handler
-+ * and only allocate new buffers when the number of buffers in the
-+ * ring is below a certain threshold. In order to avoid starving the
-+ * NIC under heavy load it is however necessary to force allocation
-+ * when hitting a minimum threshold. The strategy for alloction is as
-+ * follows:
-+ *
-+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
-+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
-+ * the buffers in the interrupt handler
-+ * RX_RING_THRES - maximum number of buffers in the rx ring
-+ *
-+ * One advantagous side effect of this allocation approach is that the
-+ * entire rx processing can be done without holding any spin lock
-+ * since the rx rings and registers are totally independent of the tx
-+ * ring and its registers. This of course includes the kmalloc's of
-+ * new skb's. Thus start_xmit can run in parallel with rx processing
-+ * and the memory allocation on SMP systems.
-+ *
-+ * Note that running the skb reallocation in a bottom half opens up
-+ * another can of races which needs to be handled properly. In
-+ * particular it can happen that the interrupt handler tries to run
-+ * the reallocation while the bottom half is either running on another
-+ * CPU or was interrupted on the same CPU. To get around this the
-+ * driver uses bitops to prevent the reallocation routines from being
-+ * reentered.
-+ *
-+ * TX handling can also be done without holding any spin lock, wheee
-+ * this is fun! since tx_csm is only written to by the interrupt
-+ * handler.
-+ */
-+
-+/*
-+ * Threshold values for RX buffer allocation - the low water marks for
-+ * when to start refilling the rings are set to 75% of the ring
-+ * sizes. It seems to make sense to refill the rings entirely from the
-+ * intrrupt handler once it gets below the panic threshold, that way
-+ * we don't risk that the refilling is moved to another CPU when the
-+ * one running the interrupt handler just got the slab code hot in its
-+ * cache.
-+ */
-+#define RX_RING_SIZE AR2313_DESCR_ENTRIES
-+#define RX_PANIC_THRES (RX_RING_SIZE/4)
-+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
-+#define CRC_LEN 4
-+#define RX_OFFSET 2
-+
-+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-+#define VLAN_HDR 4
-+#else
-+#define VLAN_HDR 0
-+#endif
-+
-+#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
-+
-+#ifdef MODULE
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
-+MODULE_DESCRIPTION("AR231x Ethernet driver");
-+#endif
-+
-+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-+
-+// prototypes
-+static void ar231x_halt(struct net_device *dev);
-+static void rx_tasklet_func(unsigned long data);
-+static void rx_tasklet_cleanup(struct net_device *dev);
-+static void ar231x_multicast_list(struct net_device *dev);
-+static void ar231x_tx_timeout(struct net_device *dev);
-+
-+static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
-+static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
-+static int ar231x_mdiobus_reset(struct mii_bus *bus);
-+static int ar231x_mdiobus_probe (struct net_device *dev);
-+static void ar231x_adjust_link(struct net_device *dev);
-+
-+#ifndef ERR
-+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-+#endif
-+
-+static const struct net_device_ops ar231x_ops = {
-+ .ndo_open = ar231x_open,
-+ .ndo_stop = ar231x_close,
-+ .ndo_start_xmit = ar231x_start_xmit,
-+ .ndo_set_multicast_list = ar231x_multicast_list,
-+ .ndo_do_ioctl = ar231x_ioctl,
-+ .ndo_change_mtu = eth_change_mtu,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_set_mac_address = eth_mac_addr,
-+ .ndo_tx_timeout = ar231x_tx_timeout,
-+};
-+
-+int __init ar231x_probe(struct platform_device *pdev)
-+{
-+ struct net_device *dev;
-+ struct ar231x_private *sp;
-+ struct resource *res;
-+ unsigned long ar_eth_base;
-+ char buf[64];
-+
-+ dev = alloc_etherdev(sizeof(struct ar231x_private));
-+
-+ if (dev == NULL) {
-+ printk(KERN_ERR
-+ "ar231x: Unable to allocate net_device structure!\n");
-+ return -ENOMEM;
-+ }
-+
-+ platform_set_drvdata(pdev, dev);
-+
-+ sp = netdev_priv(dev);
-+ sp->dev = dev;
-+ sp->cfg = pdev->dev.platform_data;
-+
-+ sprintf(buf, "eth%d_membase", pdev->id);
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
-+ if (!res)
-+ return -ENODEV;
-+
-+ sp->link = 0;
-+ ar_eth_base = res->start;
-+
-+ sprintf(buf, "eth%d_irq", pdev->id);
-+ dev->irq = platform_get_irq_byname(pdev, buf);
-+
-+ spin_lock_init(&sp->lock);
-+
-+ dev->features |= NETIF_F_HIGHDMA;
-+ dev->netdev_ops = &ar231x_ops;
-+
-+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ sp->eth_regs =
-+ ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
-+ if (!sp->eth_regs) {
-+ printk("Can't remap eth registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ /*
-+ * When there's only one MAC, PHY regs are typically on ENET0,
-+ * even though the MAC might be on ENET1.
-+ * Needto remap PHY regs separately in this case
-+ */
-+ if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
-+ sp->phy_regs = sp->eth_regs;
-+ else {
-+ sp->phy_regs =
-+ ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
-+ sizeof(*sp->phy_regs));
-+ if (!sp->phy_regs) {
-+ printk("Can't remap phy registers\n");
-+ return (-ENXIO);
-+ }
-+ }
-+
-+ sp->dma_regs =
-+ ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
-+ sizeof(*sp->dma_regs));
-+ dev->base_addr = (unsigned int) sp->dma_regs;
-+ if (!sp->dma_regs) {
-+ printk("Can't remap DMA registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
-+ if (!sp->int_regs) {
-+ printk("Can't remap INTERRUPT registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
-+ sp->name[sizeof(sp->name) - 1] = '\0';
-+ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
-+
-+ if (ar231x_init(dev)) {
-+ /*
-+ * ar231x_init() calls ar231x_init_cleanup() on error.
-+ */
-+ kfree(dev);
-+ return -ENODEV;
-+ }
-+
-+ if (register_netdev(dev)) {
-+ printk("%s: register_netdev failed\n", __func__);
-+ return -1;
-+ }
-+
-+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
-+ dev->name, sp->name,
-+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
-+
-+ sp->mii_bus = mdiobus_alloc();
-+ if (sp->mii_bus == NULL)
-+ return -1;
-+
-+ sp->mii_bus->priv = dev;
-+ sp->mii_bus->read = ar231x_mdiobus_read;
-+ sp->mii_bus->write = ar231x_mdiobus_write;
-+ sp->mii_bus->reset = ar231x_mdiobus_reset;
-+ sp->mii_bus->name = "ar231x_eth_mii";
-+ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
-+ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
-+ *sp->mii_bus->irq = PHY_POLL;
-+
-+ mdiobus_register(sp->mii_bus);
-+
-+ if (ar231x_mdiobus_probe(dev) != 0) {
-+ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
-+ rx_tasklet_cleanup(dev);
-+ ar231x_init_cleanup(dev);
-+ unregister_netdev(dev);
-+ kfree(dev);
-+ return -ENODEV;
-+ }
-+
-+ /* start link poll timer */
-+ ar231x_setup_timer(dev);
-+
-+ return 0;
-+}
-+
-+
-+static void ar231x_multicast_list(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int filter;
-+
-+ filter = sp->eth_regs->mac_control;
-+
-+ if (dev->flags & IFF_PROMISC)
-+ filter |= MAC_CONTROL_PR;
-+ else
-+ filter &= ~MAC_CONTROL_PR;
-+ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0))
-+ filter |= MAC_CONTROL_PM;
-+ else
-+ filter &= ~MAC_CONTROL_PM;
-+
-+ sp->eth_regs->mac_control = filter;
-+}
-+
-+static void rx_tasklet_cleanup(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ /*
-+ * Tasklet may be scheduled. Need to get it removed from the list
-+ * since we're about to free the struct.
-+ */
-+
-+ sp->unloading = 1;
-+ tasklet_enable(&sp->rx_tasklet);
-+ tasklet_kill(&sp->rx_tasklet);
-+}
-+
-+static int __devexit ar231x_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ rx_tasklet_cleanup(dev);
-+ ar231x_init_cleanup(dev);
-+ unregister_netdev(dev);
-+ mdiobus_unregister(sp->mii_bus);
-+ mdiobus_free(sp->mii_bus);
-+ kfree(dev);
-+ return 0;
-+}
-+
-+
-+/*
-+ * Restart the AR2313 ethernet controller.
-+ */
-+static int ar231x_restart(struct net_device *dev)
-+{
-+ /* disable interrupts */
-+ disable_irq(dev->irq);
-+
-+ /* stop mac */
-+ ar231x_halt(dev);
-+
-+ /* initialize */
-+ ar231x_init(dev);
-+
-+ /* enable interrupts */
-+ enable_irq(dev->irq);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ar231x_driver = {
-+ .driver.name = "ar231x-eth",
-+ .probe = ar231x_probe,
-+ .remove = __devexit_p(ar231x_remove),
-+};
-+
-+int __init ar231x_module_init(void)
-+{
-+ return platform_driver_register(&ar231x_driver);
-+}
-+
-+void __exit ar231x_module_cleanup(void)
-+{
-+ platform_driver_unregister(&ar231x_driver);
-+}
-+
-+module_init(ar231x_module_init);
-+module_exit(ar231x_module_cleanup);
-+
-+
-+static void ar231x_free_descriptors(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ if (sp->rx_ring != NULL) {
-+ kfree((void *) KSEG0ADDR(sp->rx_ring));
-+ sp->rx_ring = NULL;
-+ sp->tx_ring = NULL;
-+ }
-+}
-+
-+
-+static int ar231x_allocate_descriptors(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int size;
-+ int j;
-+ ar231x_descr_t *space;
-+
-+ if (sp->rx_ring != NULL) {
-+ printk("%s: already done.\n", __FUNCTION__);
-+ return 0;
-+ }
-+
-+ size =
-+ (sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
-+ space = kmalloc(size, GFP_KERNEL);
-+ if (space == NULL)
-+ return 1;
-+
-+ /* invalidate caches */
-+ dma_cache_inv((unsigned int) space, size);
-+
-+ /* now convert pointer to KSEG1 */
-+ space = (ar231x_descr_t *) KSEG1ADDR(space);
-+
-+ memset((void *) space, 0, size);
-+
-+ sp->rx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ sp->tx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ /* Initialize the transmit Descriptors */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ ar231x_descr_t *td = &sp->tx_ring[j];
-+ td->status = 0;
-+ td->devcs = DMA_TX1_CHAINED;
-+ td->addr = 0;
-+ td->descr =
-+ virt_to_phys(&sp->
-+ tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * Generic cleanup handling data allocated during init. Used when the
-+ * module is unloaded or if an error occurs during initialization
-+ */
-+static void ar231x_init_cleanup(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ struct sk_buff *skb;
-+ int j;
-+
-+ ar231x_free_descriptors(dev);
-+
-+ if (sp->eth_regs)
-+ iounmap((void *) sp->eth_regs);
-+ if (sp->dma_regs)
-+ iounmap((void *) sp->dma_regs);
-+
-+ if (sp->rx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->rx_skb[j];
-+ if (skb) {
-+ sp->rx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->rx_skb);
-+ sp->rx_skb = NULL;
-+ }
-+
-+ if (sp->tx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ sp->tx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->tx_skb);
-+ sp->tx_skb = NULL;
-+ }
-+}
-+
-+static int ar231x_setup_timer(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ init_timer(&sp->link_timer);
-+
-+ sp->link_timer.function = ar231x_link_timer_fn;
-+ sp->link_timer.data = (int) dev;
-+ sp->link_timer.expires = jiffies + HZ;
-+
-+ add_timer(&sp->link_timer);
-+ return 0;
-+
-+}
-+
-+static void ar231x_link_timer_fn(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ // see if the link status changed
-+ // This was needed to make sure we set the PHY to the
-+ // autonegotiated value of half or full duplex.
-+ ar231x_check_link(dev);
-+
-+ // Loop faster when we don't have link.
-+ // This was needed to speed up the AP bootstrap time.
-+ if (sp->link == 0) {
-+ mod_timer(&sp->link_timer, jiffies + HZ / 2);
-+ } else {
-+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
-+ }
-+}
-+
-+static void ar231x_check_link(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ u16 phyData;
-+
-+ phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
-+ if (sp->phyData != phyData) {
-+ if (phyData & BMSR_LSTATUS) {
-+ /* link is present, ready link partner ability to deterine
-+ duplexity */
-+ int duplex = 0;
-+ u16 reg;
-+
-+ sp->link = 1;
-+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
-+ if (reg & BMCR_ANENABLE) {
-+ /* auto neg enabled */
-+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
-+ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
-+ } else {
-+ /* no auto neg, just read duplex config */
-+ duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
-+ }
-+
-+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
-+ dev->name, (duplex) ? "full" : "half");
-+
-+ if (duplex) {
-+ /* full duplex */
-+ sp->eth_regs->mac_control =
-+ ((sp->eth_regs->
-+ mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
-+ } else {
-+ /* half duplex */
-+ sp->eth_regs->mac_control =
-+ ((sp->eth_regs->
-+ mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
-+ }
-+ } else {
-+ /* no link */
-+ sp->link = 0;
-+ }
-+ sp->phyData = phyData;
-+ }
-+}
-+
-+static int ar231x_reset_reg(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int ethsal, ethsah;
-+ unsigned int flags;
-+
-+ *sp->int_regs |= sp->cfg->reset_mac;
-+ mdelay(10);
-+ *sp->int_regs &= ~sp->cfg->reset_mac;
-+ mdelay(10);
-+ *sp->int_regs |= sp->cfg->reset_phy;
-+ mdelay(10);
-+ *sp->int_regs &= ~sp->cfg->reset_phy;
-+ mdelay(10);
-+
-+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
-+ mdelay(10);
-+ sp->dma_regs->bus_mode =
-+ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-+
-+ /* enable interrupts */
-+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
-+ DMA_STATUS_NIS |
-+ DMA_STATUS_RI |
-+ DMA_STATUS_TI | DMA_STATUS_FBE);
-+ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
-+ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
-+ sp->dma_regs->control =
-+ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-+
-+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
-+ sp->eth_regs->vlan_tag = (0x8100);
-+
-+ /* Enable Ethernet Interface */
-+ flags = (MAC_CONTROL_TE | /* transmit enable */
-+ MAC_CONTROL_PM | /* pass mcast */
-+ MAC_CONTROL_F | /* full duplex */
-+ MAC_CONTROL_HBD); /* heart beat disabled */
-+
-+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
-+ flags |= MAC_CONTROL_PR;
-+ }
-+ sp->eth_regs->mac_control = flags;
-+
-+ /* Set all Ethernet station address registers to their initial values */
-+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-+
-+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-+
-+ sp->eth_regs->mac_addr[0] = ethsah;
-+ sp->eth_regs->mac_addr[1] = ethsal;
-+
-+ mdelay(10);
-+
-+ return (0);
-+}
-+
-+
-+static int ar231x_init(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int ecode = 0;
-+
-+ /*
-+ * Allocate descriptors
-+ */
-+ if (ar231x_allocate_descriptors(dev)) {
-+ printk("%s: %s: ar231x_allocate_descriptors failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+
-+ /*
-+ * Get the memory for the skb rings.
-+ */
-+ if (sp->rx_skb == NULL) {
-+ sp->rx_skb =
-+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+ GFP_KERNEL);
-+ if (!(sp->rx_skb)) {
-+ printk("%s: %s: rx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ if (sp->tx_skb == NULL) {
-+ sp->tx_skb =
-+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+ GFP_KERNEL);
-+ if (!(sp->tx_skb)) {
-+ printk("%s: %s: tx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ /*
-+ * Set tx_csm before we start receiving interrupts, otherwise
-+ * the interrupt handler might think it is supposed to process
-+ * tx ints before we are up and running, which may cause a null
-+ * pointer access in the int handler.
-+ */
-+ sp->rx_skbprd = 0;
-+ sp->cur_rx = 0;
-+ sp->tx_prd = 0;
-+ sp->tx_csm = 0;
-+
-+ /*
-+ * Zero the stats before starting the interface
-+ */
-+ memset(&dev->stats, 0, sizeof(dev->stats));
-+
-+ /*
-+ * We load the ring here as there seem to be no way to tell the
-+ * firmware to wipe the ring without re-initializing it.
-+ */
-+ ar231x_load_rx_ring(dev, RX_RING_SIZE);
-+
-+ /*
-+ * Init hardware
-+ */
-+ ar231x_reset_reg(dev);
-+
-+ /*
-+ * Get the IRQ
-+ */
-+ ecode =
-+ request_irq(dev->irq, &ar231x_interrupt,
-+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-+ dev->name, dev);
-+ if (ecode) {
-+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
-+ dev->name, __FUNCTION__, dev->irq);
-+ goto init_error;
-+ }
-+
-+
-+ tasklet_enable(&sp->rx_tasklet);
-+
-+ return 0;
-+
-+ init_error:
-+ ar231x_init_cleanup(dev);
-+ return ecode;
-+}
-+
-+/*
-+ * Load the rx ring.
-+ *
-+ * Loading rings is safe without holding the spin lock since this is
-+ * done only before the device is enabled, thus no interrupts are
-+ * generated and by the interrupt handler/tasklet handler.
-+ */
-+static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
-+{
-+
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ short i, idx;
-+
-+ idx = sp->rx_skbprd;
-+
-+ for (i = 0; i < nr_bufs; i++) {
-+ struct sk_buff *skb;
-+ ar231x_descr_t *rd;
-+
-+ if (sp->rx_skb[idx])
-+ break;
-+
-+ skb = netdev_alloc_skb(dev, AR2313_BUFSIZE);
-+ if (!skb) {
-+ printk("\n\n\n\n %s: No memory in system\n\n\n\n",
-+ __FUNCTION__);
-+ break;
-+ }
-+
-+ /*
-+ * Make sure IP header starts on a fresh cache line.
-+ */
-+ skb->dev = dev;
-+ skb_reserve(skb, RX_OFFSET);
-+ sp->rx_skb[idx] = skb;
-+
-+ rd = (ar231x_descr_t *) & sp->rx_ring[idx];
-+
-+ /* initialize dma descriptor */
-+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rd->addr = virt_to_phys(skb->data);
-+ rd->descr =
-+ virt_to_phys(&sp->
-+ rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-+ rd->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ if (i)
-+ sp->rx_skbprd = idx;
-+
-+ return;
-+}
-+
-+#define AR2313_MAX_PKTS_PER_CALL 64
-+
-+static int ar231x_rx_int(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ struct sk_buff *skb, *skb_new;
-+ ar231x_descr_t *rxdesc;
-+ unsigned int status;
-+ u32 idx;
-+ int pkts = 0;
-+ int rval;
-+
-+ idx = sp->cur_rx;
-+
-+ /* process at most the entire ring and then wait for another interrupt
-+ */
-+ while (1) {
-+
-+ rxdesc = &sp->rx_ring[idx];
-+ status = rxdesc->status;
-+ if (status & DMA_RX_OWN) {
-+ /* SiByte owns descriptor or descr not yet filled in */
-+ rval = 0;
-+ break;
-+ }
-+
-+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
-+ rval = 1;
-+ break;
-+ }
-+
-+ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
-+ dev->stats.rx_errors++;
-+ dev->stats.rx_dropped++;
-+
-+ /* add statistics counters */
-+ if (status & DMA_RX_ERR_CRC)
-+ dev->stats.rx_crc_errors++;
-+ if (status & DMA_RX_ERR_COL)
-+ dev->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_LENGTH)
-+ dev->stats.rx_length_errors++;
-+ if (status & DMA_RX_ERR_RUNT)
-+ dev->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_DESC)
-+ dev->stats.rx_over_errors++;
-+
-+ } else {
-+ /* alloc new buffer. */
-+ skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
-+ if (skb_new != NULL) {
-+
-+ skb = sp->rx_skb[idx];
-+ /* set skb */
-+ skb_put(skb,
-+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
-+
-+ dev->stats.rx_bytes += skb->len;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ /* pass the packet to upper layers */
-+ netif_rx(skb);
-+
-+ skb_new->dev = dev;
-+ /* 16 bit align */
-+ skb_reserve(skb_new, RX_OFFSET);
-+ /* reset descriptor's curr_addr */
-+ rxdesc->addr = virt_to_phys(skb_new->data);
-+
-+ dev->stats.rx_packets++;
-+ sp->rx_skb[idx] = skb_new;
-+ } else {
-+ dev->stats.rx_dropped++;
-+ }
-+ }
-+
-+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rxdesc->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ sp->cur_rx = idx;
-+
-+ return rval;
-+}
-+
-+
-+static void ar231x_tx_int(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ u32 idx;
-+ struct sk_buff *skb;
-+ ar231x_descr_t *txdesc;
-+ unsigned int status = 0;
-+
-+ idx = sp->tx_csm;
-+
-+ while (idx != sp->tx_prd) {
-+ txdesc = &sp->tx_ring[idx];
-+
-+ if ((status = txdesc->status) & DMA_TX_OWN) {
-+ /* ar231x dma still owns descr */
-+ break;
-+ }
-+ /* done with this descriptor */
-+ dma_unmap_single(NULL, txdesc->addr,
-+ txdesc->devcs & DMA_TX1_BSIZE_MASK,
-+ DMA_TO_DEVICE);
-+ txdesc->status = 0;
-+
-+ if (status & DMA_TX_ERROR) {
-+ dev->stats.tx_errors++;
-+ dev->stats.tx_dropped++;
-+ if (status & DMA_TX_ERR_UNDER)
-+ dev->stats.tx_fifo_errors++;
-+ if (status & DMA_TX_ERR_HB)
-+ dev->stats.tx_heartbeat_errors++;
-+ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
-+ dev->stats.tx_carrier_errors++;
-+ if (status & (DMA_TX_ERR_LATE |
-+ DMA_TX_ERR_COL |
-+ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
-+ dev->stats.tx_aborted_errors++;
-+ } else {
-+ /* transmit OK */
-+ dev->stats.tx_packets++;
-+ }
-+
-+ skb = sp->tx_skb[idx];
-+ sp->tx_skb[idx] = NULL;
-+ idx = DSC_NEXT(idx);
-+ dev->stats.tx_bytes += skb->len;
-+ dev_kfree_skb_irq(skb);
-+ }
-+
-+ sp->tx_csm = idx;
-+
-+ return;
-+}
-+
-+
-+static void rx_tasklet_func(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ if (sp->unloading) {
-+ return;
-+ }
-+
-+ if (ar231x_rx_int(dev)) {
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+ } else {
-+ unsigned long flags;
-+ spin_lock_irqsave(&sp->lock, flags);
-+ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+ }
-+}
-+
-+static void rx_schedule(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-+
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+}
-+
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int status, enabled;
-+
-+ /* clear interrupt */
-+ /*
-+ * Don't clear RI bit if currently disabled.
-+ */
-+ status = sp->dma_regs->status;
-+ enabled = sp->dma_regs->intr_ena;
-+ sp->dma_regs->status = status & enabled;
-+
-+ if (status & DMA_STATUS_NIS) {
-+ /* normal status */
-+ /*
-+ * Don't schedule rx processing if interrupt
-+ * is already disabled.
-+ */
-+ if (status & enabled & DMA_STATUS_RI) {
-+ /* receive interrupt */
-+ rx_schedule(dev);
-+ }
-+ if (status & DMA_STATUS_TI) {
-+ /* transmit interrupt */
-+ ar231x_tx_int(dev);
-+ }
-+ }
-+
-+ /* abnormal status */
-+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
-+ ar231x_restart(dev);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int ar231x_open(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int ethsal, ethsah;
-+
-+ /* reset the hardware, in case the MAC address changed */
-+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-+
-+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-+
-+ sp->eth_regs->mac_addr[0] = ethsah;
-+ sp->eth_regs->mac_addr[1] = ethsal;
-+
-+ mdelay(10);
-+
-+ dev->mtu = 1500;
-+ netif_start_queue(dev);
-+
-+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-+
-+ return 0;
-+}
-+
-+static void ar231x_tx_timeout(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&sp->lock, flags);
-+ ar231x_restart(dev);
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+}
-+
-+static void ar231x_halt(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int j;
-+
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ /* kill the MAC */
-+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
-+ MAC_CONTROL_TE); /* disable Transmits */
-+ /* stop dma */
-+ sp->dma_regs->control = 0;
-+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-+
-+ /* place phy and MAC in reset */
-+ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
-+
-+ /* free buffers on tx ring */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ struct sk_buff *skb;
-+ ar231x_descr_t *txdesc;
-+
-+ txdesc = &sp->tx_ring[j];
-+ txdesc->descr = 0;
-+
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ dev_kfree_skb(skb);
-+ sp->tx_skb[j] = NULL;
-+ }
-+ }
-+}
-+
-+/*
-+ * close should do nothing. Here's why. It's called when
-+ * 'ifconfig bond0 down' is run. If it calls free_irq then
-+ * the irq is gone forever ! When bond0 is made 'up' again,
-+ * the ar231x_open () does not call request_irq (). Worse,
-+ * the call to ar231x_halt() generates a WDOG reset due to
-+ * the write to 'sp->int_regs' and the box reboots.
-+ * Commenting this out is good since it allows the
-+ * system to resume when bond0 is made up again.
-+ */
-+static int ar231x_close(struct net_device *dev)
-+{
-+#if 0
-+ /*
-+ * Disable interrupts
-+ */
-+ disable_irq(dev->irq);
-+
-+ /*
-+ * Without (or before) releasing irq and stopping hardware, this
-+ * is an absolute non-sense, by the way. It will be reset instantly
-+ * by the first irq.
-+ */
-+ netif_stop_queue(dev);
-+
-+ /* stop the MAC and DMA engines */
-+ ar231x_halt(dev);
-+
-+ /* release the interrupt */
-+ free_irq(dev->irq, dev);
-+
-+#endif
-+ return 0;
-+}
-+
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ ar231x_descr_t *td;
-+ u32 idx;
-+
-+ idx = sp->tx_prd;
-+ td = &sp->tx_ring[idx];
-+
-+ if (td->status & DMA_TX_OWN) {
-+ /* free skbuf and lie to the caller that we sent it out */
-+ dev->stats.tx_dropped++;
-+ dev_kfree_skb(skb);
-+
-+ /* restart transmitter in case locked */
-+ sp->dma_regs->xmt_poll = 0;
-+ return 0;
-+ }
-+
-+ /* Setup the transmit descriptor. */
-+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
-+ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
-+ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+ td->status = DMA_TX_OWN;
-+
-+ /* kick transmitter last */
-+ sp->dma_regs->xmt_poll = 0;
-+
-+ sp->tx_skb[idx] = skb;
-+ idx = DSC_NEXT(idx);
-+ sp->tx_prd = idx;
-+
-+ return 0;
-+}
-+
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int ret;
-+
-+ switch (cmd) {
-+
-+ case SIOCETHTOOL:
-+ spin_lock_irq(&sp->lock);
-+ ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
-+ spin_unlock_irq(&sp->lock);
-+ return ret;
-+
-+ case SIOCSIFHWADDR:
-+ if (copy_from_user
-+ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case SIOCGIFHWADDR:
-+ if (copy_to_user
-+ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case SIOCGMIIPHY:
-+ case SIOCGMIIREG:
-+ case SIOCSMIIREG:
-+ return phy_mii_ioctl(sp->phy_dev, data, cmd);
-+
-+ default:
-+ break;
-+ }
-+
-+ return -EOPNOTSUPP;
-+}
-+
-+static void ar231x_adjust_link(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int mc;
-+
-+ if (!sp->phy_dev->link)
-+ return;
-+
-+ if (sp->phy_dev->duplex != sp->oldduplex) {
-+ mc = readl(&sp->eth_regs->mac_control);
-+ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
-+ if (sp->phy_dev->duplex)
-+ mc |= MAC_CONTROL_F;
-+ else
-+ mc |= MAC_CONTROL_DRO;
-+ writel(mc, &sp->eth_regs->mac_control);
-+ sp->oldduplex = sp->phy_dev->duplex;
-+ }
-+}
-+
-+#define MII_ADDR(phy, reg) \
-+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
-+
-+static int
-+ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
-+{
-+ struct net_device *const dev = bus->priv;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-+
-+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ return (ethernet->mii_data >> MII_DATA_SHIFT);
-+}
-+
-+static int
-+ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
-+ u16 value)
-+{
-+ struct net_device *const dev = bus->priv;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-+
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ ethernet->mii_data = value << MII_DATA_SHIFT;
-+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
-+
-+ return 0;
-+}
-+
-+static int ar231x_mdiobus_reset(struct mii_bus *bus)
-+{
-+ struct net_device *const dev = bus->priv;
-+
-+ ar231x_reset_reg(dev);
-+
-+ return 0;
-+}
-+
-+static int ar231x_mdiobus_probe (struct net_device *dev)
-+{
-+ struct ar231x_private *const sp = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ int phy_addr;
-+
-+ /* find the first (lowest address) PHY on the current MAC's MII bus */
-+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
-+ if (sp->mii_bus->phy_map[phy_addr]) {
-+ phydev = sp->mii_bus->phy_map[phy_addr];
-+ sp->phy = phy_addr;
-+ break; /* break out with first one found */
-+ }
-+
-+ if (!phydev) {
-+ printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
-+ return -1;
-+ }
-+
-+ /* now we are supposed to have a proper phydev, to attach to... */
-+ BUG_ON(!phydev);
-+ BUG_ON(phydev->attached_dev);
-+
-+ phydev = phy_connect(dev, dev_name(&phydev->dev), &ar231x_adjust_link, 0,
-+ PHY_INTERFACE_MODE_MII);
-+
-+ if (IS_ERR(phydev)) {
-+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+ return PTR_ERR(phydev);
-+ }
-+
-+ /* mask with MAC supported features */
-+ phydev->supported &= (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_Autoneg
-+ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
-+
-+ phydev->advertising = phydev->supported;
-+
-+ sp->oldduplex = -1;
-+ sp->phy_dev = phydev;
-+
-+ printk(KERN_INFO "%s: attached PHY driver [%s] "
-+ "(mii_bus:phy_addr=%s)\n",
-+ dev->name, phydev->drv->name, dev_name(&phydev->dev));
-+
-+ return 0;
-+}
-+
---- /dev/null
-+++ b/drivers/net/ar231x.h
-@@ -0,0 +1,302 @@
-+/*
-+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef _AR2313_H_
-+#define _AR2313_H_
-+
-+#include <generated/autoconf.h>
-+#include <linux/bitops.h>
-+#include <asm/bootinfo.h>
-+#include <ar231x_platform.h>
-+
-+/*
-+ * probe link timer - 5 secs
-+ */
-+#define LINK_TIMER (5*HZ)
-+
-+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
-+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
-+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
-+
-+#define AR2313_TX_TIMEOUT (HZ/4)
-+
-+/*
-+ * Rings
-+ */
-+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
-+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
-+
-+#define AR2313_MBGET 2
-+#define AR2313_MBSET 3
-+#define AR2313_PCI_RECONFIG 4
-+#define AR2313_PCI_DUMP 5
-+#define AR2313_TEST_PANIC 6
-+#define AR2313_TEST_NULLPTR 7
-+#define AR2313_READ_DATA 8
-+#define AR2313_WRITE_DATA 9
-+#define AR2313_GET_VERSION 10
-+#define AR2313_TEST_HANG 11
-+#define AR2313_SYNC 12
-+
-+#define DMA_RX_ERR_CRC BIT(1)
-+#define DMA_RX_ERR_DRIB BIT(2)
-+#define DMA_RX_ERR_MII BIT(3)
-+#define DMA_RX_EV2 BIT(5)
-+#define DMA_RX_ERR_COL BIT(6)
-+#define DMA_RX_LONG BIT(7)
-+#define DMA_RX_LS BIT(8) /* last descriptor */
-+#define DMA_RX_FS BIT(9) /* first descriptor */
-+#define DMA_RX_MF BIT(10) /* multicast frame */
-+#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */
-+#define DMA_RX_ERR_LENGTH BIT(12) /* length error */
-+#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */
-+#define DMA_RX_ERROR BIT(15) /* error summary */
-+#define DMA_RX_LEN_MASK 0x3fff0000
-+#define DMA_RX_LEN_SHIFT 16
-+#define DMA_RX_FILT BIT(30)
-+#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */
-+
-+#define DMA_RX1_BSIZE_MASK 0x000007ff
-+#define DMA_RX1_BSIZE_SHIFT 0
-+#define DMA_RX1_CHAINED BIT(24)
-+#define DMA_RX1_RER BIT(25)
-+
-+#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */
-+#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */
-+#define DMA_TX_COL_MASK 0x78
-+#define DMA_TX_COL_SHIFT 3
-+#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */
-+#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */
-+#define DMA_TX_ERR_LATE BIT(9) /* late collision */
-+#define DMA_TX_ERR_LINK BIT(10) /* no carrier */
-+#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */
-+#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */
-+#define DMA_TX_ERROR BIT(15) /* frame aborted */
-+#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */
-+
-+#define DMA_TX1_BSIZE_MASK 0x000007ff
-+#define DMA_TX1_BSIZE_SHIFT 0
-+#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */
-+#define DMA_TX1_TER BIT(25) /* transmit end of ring */
-+#define DMA_TX1_FS BIT(29) /* first segment */
-+#define DMA_TX1_LS BIT(30) /* last segment */
-+#define DMA_TX1_IC BIT(31) /* interrupt on completion */
-+
-+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
-+
-+#define MAC_CONTROL_RE BIT(2) /* receive enable */
-+#define MAC_CONTROL_TE BIT(3) /* transmit enable */
-+#define MAC_CONTROL_DC BIT(5) /* Deferral check */
-+#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */
-+#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */
-+#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */
-+#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */
-+#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */
-+#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */
-+#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */
-+#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */
-+#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */
-+#define MAC_CONTROL_PR BIT(18) /* promiscuous mode (valid frames only) */
-+#define MAC_CONTROL_PM BIT(19) /* pass multicast */
-+#define MAC_CONTROL_F BIT(20) /* full-duplex */
-+#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */
-+#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */
-+#define MAC_CONTROL_BLE BIT(30) /* big endian mode */
-+#define MAC_CONTROL_RA BIT(31) /* receive all (valid and invalid frames) */
-+
-+#define MII_ADDR_BUSY BIT(0)
-+#define MII_ADDR_WRITE BIT(1)
-+#define MII_ADDR_REG_SHIFT 6
-+#define MII_ADDR_PHY_SHIFT 11
-+#define MII_DATA_SHIFT 0
-+
-+#define FLOW_CONTROL_FCE BIT(1)
-+
-+#define DMA_BUS_MODE_SWR BIT(0) /* software reset */
-+#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */
-+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
-+#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */
-+
-+#define DMA_STATUS_TI BIT(0) /* transmit interrupt */
-+#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */
-+#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */
-+#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */
-+#define DMA_STATUS_UNF BIT(5) /* transmit underflow */
-+#define DMA_STATUS_RI BIT(6) /* receive interrupt */
-+#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */
-+#define DMA_STATUS_RPS BIT(8) /* receive process stopped */
-+#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */
-+#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */
-+#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */
-+#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */
-+#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */
-+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
-+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
-+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
-+
-+#define DMA_CONTROL_SR BIT(1) /* start receive */
-+#define DMA_CONTROL_ST BIT(13) /* start transmit */
-+#define DMA_CONTROL_SF BIT(21) /* store and forward */
-+
-+
-+typedef struct {
-+ volatile unsigned int status; // OWN, Device control and status.
-+ volatile unsigned int devcs; // pkt Control bits + Length
-+ volatile unsigned int addr; // Current Address.
-+ volatile unsigned int descr; // Next descriptor in chain.
-+} ar231x_descr_t;
-+
-+
-+
-+//
-+// New Combo structure for Both Eth0 AND eth1
-+//
-+typedef struct {
-+ volatile unsigned int mac_control; /* 0x00 */
-+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
-+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
-+ volatile unsigned int mii_addr; /* 0x14 */
-+ volatile unsigned int mii_data; /* 0x18 */
-+ volatile unsigned int flow_control; /* 0x1c */
-+ volatile unsigned int vlan_tag; /* 0x20 */
-+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
-+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
-+
-+} ETHERNET_STRUCT;
-+
-+/********************************************************************
-+ * Interrupt controller
-+ ********************************************************************/
-+
-+typedef struct {
-+ volatile unsigned int wdog_control; /* 0x08 */
-+ volatile unsigned int wdog_timer; /* 0x0c */
-+ volatile unsigned int misc_status; /* 0x10 */
-+ volatile unsigned int misc_mask; /* 0x14 */
-+ volatile unsigned int global_status; /* 0x18 */
-+ volatile unsigned int reserved; /* 0x1c */
-+ volatile unsigned int reset_control; /* 0x20 */
-+} INTERRUPT;
-+
-+/********************************************************************
-+ * DMA controller
-+ ********************************************************************/
-+typedef struct {
-+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
-+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
-+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
-+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
-+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
-+ volatile unsigned int status; /* 0x14 (CSR5) */
-+ volatile unsigned int control; /* 0x18 (CSR6) */
-+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
-+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
-+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
-+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
-+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
-+} DMA;
-+
-+/*
-+ * Struct private for the Sibyte.
-+ *
-+ * Elements are grouped so variables used by the tx handling goes
-+ * together, and will go into the same cache lines etc. in order to
-+ * avoid cache line contention between the rx and tx handling on SMP.
-+ *
-+ * Frequently accessed variables are put at the beginning of the
-+ * struct to help the compiler generate better/shorter code.
-+ */
-+struct ar231x_private {
-+ struct net_device *dev;
-+ int version;
-+ u32 mb[2];
-+
-+ volatile ETHERNET_STRUCT *phy_regs;
-+ volatile ETHERNET_STRUCT *eth_regs;
-+ volatile DMA *dma_regs;
-+ volatile u32 *int_regs;
-+ struct ar231x_eth *cfg;
-+
-+ spinlock_t lock; /* Serialise access to device */
-+
-+ /*
-+ * RX and TX descriptors, must be adjacent
-+ */
-+ ar231x_descr_t *rx_ring;
-+ ar231x_descr_t *tx_ring;
-+
-+
-+ struct sk_buff **rx_skb;
-+ struct sk_buff **tx_skb;
-+
-+ /*
-+ * RX elements
-+ */
-+ u32 rx_skbprd;
-+ u32 cur_rx;
-+
-+ /*
-+ * TX elements
-+ */
-+ u32 tx_prd;
-+ u32 tx_csm;
-+
-+ /*
-+ * Misc elements
-+ */
-+ char name[48];
-+ struct {
-+ u32 address;
-+ u32 length;
-+ char *mapping;
-+ } desc;
-+
-+
-+ struct timer_list link_timer;
-+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
-+ unsigned short mac;
-+ unsigned short link; /* 0 - link down, 1 - link up */
-+ u16 phyData;
-+
-+ struct tasklet_struct rx_tasklet;
-+ int unloading;
-+
-+ struct phy_device *phy_dev;
-+ struct mii_bus *mii_bus;
-+ int oldduplex;
-+};
-+
-+
-+/*
-+ * Prototypes
-+ */
-+static int ar231x_init(struct net_device *dev);
-+#ifdef TX_TIMEOUT
-+static void ar231x_tx_timeout(struct net_device *dev);
-+#endif
-+static int ar231x_restart(struct net_device *dev);
-+static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
-+static int ar231x_open(struct net_device *dev);
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static int ar231x_close(struct net_device *dev);
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr,
-+ int cmd);
-+static void ar231x_init_cleanup(struct net_device *dev);
-+static int ar231x_setup_timer(struct net_device *dev);
-+static void ar231x_link_timer_fn(unsigned long data);
-+static void ar231x_check_link(struct net_device *dev);
-+#endif /* _AR2313_H_ */
diff --git a/target/linux/atheros/patches-2.6.34/120-spiflash.patch b/target/linux/atheros/patches-2.6.34/120-spiflash.patch
deleted file mode 100644
index 8e37146497..0000000000
--- a/target/linux/atheros/patches-2.6.34/120-spiflash.patch
+++ /dev/null
@@ -1,659 +0,0 @@
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
-@@ -112,6 +112,10 @@ config MTD_SST25L
- Set up your spi devices with the right board-specific platform data,
- if you want to specify device partitioning.
-
-+config MTD_AR2315
-+ tristate "Atheros AR2315+ SPI Flash support"
-+ depends on ATHEROS_AR2315
-+
- config MTD_SLRAM
- tristate "Uncached system RAM"
- help
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
- obj-$(CONFIG_MTD_SST25L) += sst25l.o
-+obj-$(CONFIG_MTD_AR2315) += ar2315.o
---- /dev/null
-+++ b/drivers/mtd/devices/ar2315.c
-@@ -0,0 +1,517 @@
-+
-+/*
-+ * MTD driver for the SPI Flash Memory support on Atheros AR2315
-+ *
-+ * Copyright (c) 2005-2006 Atheros Communications Inc.
-+ * Copyright (C) 2006-2007 FON Technology, SL.
-+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/platform_device.h>
-+#include <linux/sched.h>
-+#include <linux/root_dev.h>
-+#include <linux/delay.h>
-+#include <asm/delay.h>
-+#include <asm/io.h>
-+
-+#include <ar2315_spiflash.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+
-+
-+#define SPIFLASH "spiflash: "
-+#define busy_wait(_priv, _condition, _wait) do { \
-+ while (_condition) { \
-+ spin_unlock_bh(&_priv->lock); \
-+ if (_wait > 1) \
-+ msleep(_wait); \
-+ else if ((_wait == 1) && need_resched()) \
-+ schedule(); \
-+ else \
-+ udelay(1); \
-+ spin_lock_bh(&_priv->lock); \
-+ } \
-+} while (0)
-+
-+enum {
-+ FLASH_NONE,
-+ FLASH_1MB,
-+ FLASH_2MB,
-+ FLASH_4MB,
-+ FLASH_8MB,
-+ FLASH_16MB,
-+};
-+
-+/* Flash configuration table */
-+struct flashconfig {
-+ u32 byte_cnt;
-+ u32 sector_cnt;
-+ u32 sector_size;
-+};
-+
-+const struct flashconfig flashconfig_tbl[] = {
-+ [FLASH_NONE] = { 0, 0, 0},
-+ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE},
-+ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE},
-+ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE},
-+ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE},
-+ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE}
-+};
-+
-+/* Mapping of generic opcodes to STM serial flash opcodes */
-+enum {
-+ SPI_WRITE_ENABLE,
-+ SPI_WRITE_DISABLE,
-+ SPI_RD_STATUS,
-+ SPI_WR_STATUS,
-+ SPI_RD_DATA,
-+ SPI_FAST_RD_DATA,
-+ SPI_PAGE_PROGRAM,
-+ SPI_SECTOR_ERASE,
-+ SPI_BULK_ERASE,
-+ SPI_DEEP_PWRDOWN,
-+ SPI_RD_SIG,
-+};
-+
-+struct opcodes {
-+ __u16 code;
-+ __s8 tx_cnt;
-+ __s8 rx_cnt;
-+};
-+const struct opcodes stm_opcodes[] = {
-+ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
-+ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
-+ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
-+ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
-+ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
-+ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
-+ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
-+ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
-+ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
-+ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
-+ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
-+};
-+
-+/* Driver private data structure */
-+struct spiflash_priv {
-+ struct mtd_info mtd;
-+ void *readaddr; /* memory mapped data for read */
-+ void *mmraddr; /* memory mapped register space */
-+ wait_queue_head_t wq;
-+ spinlock_t lock;
-+ int state;
-+};
-+
-+#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
-+
-+enum {
-+ FL_READY,
-+ FL_READING,
-+ FL_ERASING,
-+ FL_WRITING
-+};
-+
-+/***************************************************************************************************/
-+
-+static u32
-+spiflash_read_reg(struct spiflash_priv *priv, int reg)
-+{
-+ return ar231x_read_reg((u32) priv->mmraddr + reg);
-+}
-+
-+static void
-+spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
-+{
-+ ar231x_write_reg((u32) priv->mmraddr + reg, data);
-+}
-+
-+static u32
-+spiflash_wait_busy(struct spiflash_priv *priv)
-+{
-+ u32 reg;
-+
-+ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
-+ SPI_CTL_BUSY, 0);
-+ return reg;
-+}
-+
-+static u32
-+spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr)
-+{
-+ const struct opcodes *op;
-+ u32 reg, mask;
-+
-+ op = &stm_opcodes[opcode];
-+ reg = spiflash_wait_busy(priv);
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE,
-+ ((u32) op->code) | (addr << 8));
-+
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
-+
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+ spiflash_wait_busy(priv);
-+
-+ if (!op->rx_cnt)
-+ return 0;
-+
-+ reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
-+
-+ switch (op->rx_cnt) {
-+ case 1:
-+ mask = 0x000000ff;
-+ break;
-+ case 2:
-+ mask = 0x0000ffff;
-+ break;
-+ case 3:
-+ mask = 0x00ffffff;
-+ break;
-+ default:
-+ mask = 0xffffffff;
-+ break;
-+ }
-+ reg &= mask;
-+
-+ return reg;
-+}
-+
-+
-+/*
-+ * Probe SPI flash device
-+ * Function returns 0 for failure.
-+ * and flashconfig_tbl array index for success.
-+ */
-+static int
-+spiflash_probe_chip (struct spiflash_priv *priv)
-+{
-+ u32 sig;
-+ int flash_size;
-+
-+ /* Read the signature on the flash device */
-+ spin_lock_bh(&priv->lock);
-+ sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
-+ spin_unlock_bh(&priv->lock);
-+
-+ switch (sig) {
-+ case STM_8MBIT_SIGNATURE:
-+ flash_size = FLASH_1MB;
-+ break;
-+ case STM_16MBIT_SIGNATURE:
-+ flash_size = FLASH_2MB;
-+ break;
-+ case STM_32MBIT_SIGNATURE:
-+ flash_size = FLASH_4MB;
-+ break;
-+ case STM_64MBIT_SIGNATURE:
-+ flash_size = FLASH_8MB;
-+ break;
-+ case STM_128MBIT_SIGNATURE:
-+ flash_size = FLASH_16MB;
-+ break;
-+ default:
-+ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
-+ return 0;
-+ }
-+
-+ return flash_size;
-+}
-+
-+
-+/* wait until the flash chip is ready and grab a lock */
-+static int spiflash_wait_ready(struct spiflash_priv *priv, int state)
-+{
-+ DECLARE_WAITQUEUE(wait, current);
-+
-+retry:
-+ spin_lock_bh(&priv->lock);
-+ if (priv->state != FL_READY) {
-+ set_current_state(TASK_UNINTERRUPTIBLE);
-+ add_wait_queue(&priv->wq, &wait);
-+ spin_unlock_bh(&priv->lock);
-+ schedule();
-+ remove_wait_queue(&priv->wq, &wait);
-+
-+ if(signal_pending(current))
-+ return 0;
-+
-+ goto retry;
-+ }
-+ priv->state = state;
-+
-+ return 1;
-+}
-+
-+static inline void spiflash_done(struct spiflash_priv *priv)
-+{
-+ priv->state = FL_READY;
-+ spin_unlock_bh(&priv->lock);
-+ wake_up(&priv->wq);
-+}
-+
-+static void
-+spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout)
-+{
-+ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
-+ SPI_STATUS_WIP, timeout);
-+ spiflash_done(priv);
-+}
-+
-+
-+
-+static int
-+spiflash_erase (struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ const struct opcodes *op;
-+ u32 temp, reg;
-+
-+ if (instr->addr + instr->len > mtd->size)
-+ return -EINVAL;
-+
-+ if (!spiflash_wait_ready(priv, FL_ERASING))
-+ return -EINTR;
-+
-+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+ reg = spiflash_wait_busy(priv);
-+
-+ op = &stm_opcodes[SPI_SECTOR_ERASE];
-+ temp = ((u32)instr->addr << 8) | (u32)(op->code);
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
-+
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= op->tx_cnt | SPI_CTL_START;
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+ spiflash_wait_complete(priv, 20);
-+
-+ instr->state = MTD_ERASE_DONE;
-+ mtd_erase_callback(instr);
-+
-+ return 0;
-+}
-+
-+static int
-+spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ u8 *read_addr;
-+
-+ if (!len)
-+ return 0;
-+
-+ if (from + len > mtd->size)
-+ return -EINVAL;
-+
-+ *retlen = len;
-+
-+ if (!spiflash_wait_ready(priv, FL_READING))
-+ return -EINTR;
-+
-+ read_addr = (u8 *)(priv->readaddr + from);
-+ memcpy_fromio(buf, read_addr, len);
-+ spiflash_done(priv);
-+
-+ return 0;
-+}
-+
-+static int
-+spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ u32 opcode, bytes_left;
-+
-+ *retlen = 0;
-+
-+ if (!len)
-+ return 0;
-+
-+ if (to + len > mtd->size)
-+ return -EINVAL;
-+
-+ bytes_left = len;
-+
-+ do {
-+ u32 read_len, reg, page_offset, spi_data = 0;
-+
-+ read_len = min(bytes_left, sizeof(u32));
-+
-+ /* 32-bit writes cannot span across a page boundary
-+ * (256 bytes). This types of writes require two page
-+ * program operations to handle it correctly. The STM part
-+ * will write the overflow data to the beginning of the
-+ * current page as opposed to the subsequent page.
-+ */
-+ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
-+
-+ if (page_offset > STM_PAGE_SIZE)
-+ read_len -= (page_offset - STM_PAGE_SIZE);
-+
-+ if (!spiflash_wait_ready(priv, FL_WRITING))
-+ return -EINTR;
-+
-+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+ spi_data = 0;
-+ switch (read_len) {
-+ case 4:
-+ spi_data |= buf[3] << 24;
-+ /* fall through */
-+ case 3:
-+ spi_data |= buf[2] << 16;
-+ /* fall through */
-+ case 2:
-+ spi_data |= buf[1] << 8;
-+ /* fall through */
-+ case 1:
-+ spi_data |= buf[0] & 0xff;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
-+ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
-+ (to & 0x00ffffff) << 8;
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
-+
-+ reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= (read_len + 4) | SPI_CTL_START;
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+ spiflash_wait_complete(priv, 1);
-+
-+ bytes_left -= read_len;
-+ to += read_len;
-+ buf += read_len;
-+
-+ *retlen += read_len;
-+ } while (bytes_left != 0);
-+
-+ return 0;
-+}
-+
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
-+#endif
-+
-+
-+static int
-+spiflash_probe(struct platform_device *pdev)
-+{
-+ struct spiflash_priv *priv;
-+ struct mtd_partition *parts;
-+ struct mtd_info *mtd;
-+ int index, num_parts;
-+ int result = 0;
-+
-+ priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL);
-+ spin_lock_init(&priv->lock);
-+ init_waitqueue_head(&priv->wq);
-+ priv->state = FL_READY;
-+ mtd = &priv->mtd;
-+
-+ priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
-+ if (!priv->mmraddr) {
-+ printk(KERN_WARNING SPIFLASH "Failed to map flash device\n");
-+ goto error;
-+ }
-+
-+ index = spiflash_probe_chip(priv);
-+ if (!index) {
-+ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
-+ goto error;
-+ }
-+
-+ priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
-+ if (!priv->readaddr) {
-+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
-+ goto error;
-+ }
-+
-+ platform_set_drvdata(pdev, priv);
-+ mtd->name = "spiflash";
-+ mtd->type = MTD_NORFLASH;
-+ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
-+ mtd->size = flashconfig_tbl[index].byte_cnt;
-+ mtd->erasesize = flashconfig_tbl[index].sector_size;
-+ mtd->writesize = 1;
-+ mtd->numeraseregions = 0;
-+ mtd->eraseregions = NULL;
-+ mtd->erase = spiflash_erase;
-+ mtd->read = spiflash_read;
-+ mtd->write = spiflash_write;
-+ mtd->owner = THIS_MODULE;
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+ /* parse redboot partitions */
-+ num_parts = parse_mtd_partitions(mtd, part_probe_types, &parts, 0);
-+ if (!num_parts)
-+ goto error;
-+
-+ result = add_mtd_partitions(mtd, parts, num_parts);
-+#endif
-+
-+ return result;
-+
-+error:
-+ if (priv->mmraddr)
-+ iounmap(priv->mmraddr);
-+ kfree(priv);
-+ return -ENXIO;
-+}
-+
-+static int
-+spiflash_remove (struct platform_device *pdev)
-+{
-+ struct spiflash_priv *priv = platform_get_drvdata(pdev);
-+ struct mtd_info *mtd = &priv->mtd;
-+
-+ del_mtd_partitions(mtd);
-+ iounmap(priv->mmraddr);
-+ iounmap(priv->readaddr);
-+ kfree(priv);
-+
-+ return 0;
-+}
-+
-+struct platform_driver spiflash_driver = {
-+ .driver.name = "spiflash",
-+ .probe = spiflash_probe,
-+ .remove = spiflash_remove,
-+};
-+
-+int __init
-+spiflash_init (void)
-+{
-+ return platform_driver_register(&spiflash_driver);
-+}
-+
-+void __exit
-+spiflash_exit (void)
-+{
-+ return platform_driver_unregister(&spiflash_driver);
-+}
-+
-+module_init (spiflash_init);
-+module_exit (spiflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
-+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
-+
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h
-@@ -0,0 +1,116 @@
-+/*
-+ * SPI Flash Memory support header file.
-+ *
-+ * Copyright (c) 2005, Atheros Communications Inc.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __AR2315_SPIFLASH_H
-+#define __AR2315_SPIFLASH_H
-+
-+#define STM_PAGE_SIZE 256
-+
-+#define SFI_WRITE_BUFFER_SIZE 4
-+#define SFI_FLASH_ADDR_MASK 0x00ffffff
-+
-+#define STM_8MBIT_SIGNATURE 0x13
-+#define STM_M25P80_BYTE_COUNT 1048576
-+#define STM_M25P80_SECTOR_COUNT 16
-+#define STM_M25P80_SECTOR_SIZE 0x10000
-+
-+#define STM_16MBIT_SIGNATURE 0x14
-+#define STM_M25P16_BYTE_COUNT 2097152
-+#define STM_M25P16_SECTOR_COUNT 32
-+#define STM_M25P16_SECTOR_SIZE 0x10000
-+
-+#define STM_32MBIT_SIGNATURE 0x15
-+#define STM_M25P32_BYTE_COUNT 4194304
-+#define STM_M25P32_SECTOR_COUNT 64
-+#define STM_M25P32_SECTOR_SIZE 0x10000
-+
-+#define STM_64MBIT_SIGNATURE 0x16
-+#define STM_M25P64_BYTE_COUNT 8388608
-+#define STM_M25P64_SECTOR_COUNT 128
-+#define STM_M25P64_SECTOR_SIZE 0x10000
-+
-+#define STM_128MBIT_SIGNATURE 0x17
-+#define STM_M25P128_BYTE_COUNT 16777216
-+#define STM_M25P128_SECTOR_COUNT 256
-+#define STM_M25P128_SECTOR_SIZE 0x10000
-+
-+#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
-+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
-+#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
-+#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
-+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
-+#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
-+#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
-+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
-+#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
-+#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
-+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
-+#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
-+#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
-+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
-+#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
-+
-+/*
-+ * ST Microelectronics Opcodes for Serial Flash
-+ */
-+
-+#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
-+#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
-+#define STM_OP_RD_STATUS 0x05 /* Read Status */
-+#define STM_OP_WR_STATUS 0x01 /* Write Status */
-+#define STM_OP_RD_DATA 0x03 /* Read Data */
-+#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
-+#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
-+#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
-+#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
-+#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
-+#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
-+
-+#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
-+#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
-+#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
-+#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
-+#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
-+#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+#define AR531XPLUS_SPI_READ 0x08000000
-+#define AR531XPLUS_SPI_MMR 0x11300000
-+#define AR531XPLUS_SPI_MMR_SIZE 12
-+
-+#define AR531XPLUS_SPI_CTL 0x00
-+#define AR531XPLUS_SPI_OPCODE 0x04
-+#define AR531XPLUS_SPI_DATA 0x08
-+
-+#define SPI_FLASH_READ AR531XPLUS_SPI_READ
-+#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
-+#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
-+#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
-+#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
-+#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
-+
-+#define SPI_CTL_START 0x00000100
-+#define SPI_CTL_BUSY 0x00010000
-+#define SPI_CTL_TXCNT_MASK 0x0000000f
-+#define SPI_CTL_RXCNT_MASK 0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
-+#define SPI_CTL_SIZE_MASK 0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK 0x03000000
-+#define SPI_OPCODE_MASK 0x000000ff
-+
-+#define SPI_STATUS_WIP STM_STATUS_WIP
-+
-+#endif
diff --git a/target/linux/atheros/patches-2.6.34/130-watchdog.patch b/target/linux/atheros/patches-2.6.34/130-watchdog.patch
deleted file mode 100644
index 80d244e447..0000000000
--- a/target/linux/atheros/patches-2.6.34/130-watchdog.patch
+++ /dev/null
@@ -1,228 +0,0 @@
---- /dev/null
-+++ b/drivers/watchdog/ar2315-wtd.c
-@@ -0,0 +1,200 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
-+ * Based on EP93xx and ifxmips wdt driver
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/fs.h>
-+#include <linux/ioport.h>
-+#include <linux/notifier.h>
-+#include <linux/reboot.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+#include <asm/system.h>
-+#include <asm/addrspace.h>
-+#include <ar231x_platform.h>
-+#include <ar2315_regs.h>
-+#include <ar231x.h>
-+
-+#define CLOCK_RATE 40000000
-+#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
-+
-+static int wdt_timeout = 20;
-+static int started = 0;
-+static int in_use = 0;
-+
-+static void
-+ar2315_wdt_enable(void)
-+{
-+ ar231x_write_reg(AR2315_WD, wdt_timeout * CLOCK_RATE);
-+ ar231x_write_reg(AR2315_ISR, 0x80);
-+}
-+
-+static ssize_t
-+ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
-+{
-+ if(len)
-+ ar2315_wdt_enable();
-+ return len;
-+}
-+
-+static int
-+ar2315_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if(in_use)
-+ return -EBUSY;
-+ ar2315_wdt_enable();
-+ in_use = started = 1;
-+ return nonseekable_open(inode, file);
-+}
-+
-+static int
-+ar2315_wdt_release(struct inode *inode, struct file *file)
-+{
-+ in_use = 0;
-+ return 0;
-+}
-+
-+static irqreturn_t
-+ar2315_wdt_interrupt(int irq, void *dev_id)
-+{
-+ if(started)
-+ {
-+ printk(KERN_CRIT "watchdog expired, rebooting system\n");
-+ emergency_restart();
-+ } else {
-+ ar231x_write_reg(AR2315_WDC, 0);
-+ ar231x_write_reg(AR2315_WD, 0);
-+ ar231x_write_reg(AR2315_ISR, 0x80);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static struct watchdog_info ident = {
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+ .identity = "ar2315 Watchdog",
-+};
-+
-+static int
-+ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ int new_wdt_timeout;
-+ int ret = -ENOIOCTLCMD;
-+
-+ switch(cmd)
-+ {
-+ case WDIOC_GETSUPPORT:
-+ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
-+ break;
-+
-+ case WDIOC_KEEPALIVE:
-+ ar2315_wdt_enable();
-+ ret = 0;
-+ break;
-+
-+ case WDIOC_SETTIMEOUT:
-+ if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
-+ break;
-+ wdt_timeout = HEARTBEAT(new_wdt_timeout);
-+ ar2315_wdt_enable();
-+ break;
-+
-+ case WDIOC_GETTIMEOUT:
-+ ret = put_user(wdt_timeout, (int __user *)arg);
-+ break;
-+ }
-+ return ret;
-+}
-+
-+static struct file_operations ar2315_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .write = ar2315_wdt_write,
-+ .ioctl = ar2315_wdt_ioctl,
-+ .open = ar2315_wdt_open,
-+ .release = ar2315_wdt_release,
-+};
-+
-+static struct miscdevice ar2315_wdt_miscdev = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &ar2315_wdt_fops,
-+};
-+
-+static int
-+ar2315_wdt_probe(struct platform_device *dev)
-+{
-+ int ret = 0;
-+
-+ ar2315_wdt_enable();
-+ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
-+ if(ret)
-+ {
-+ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
-+ goto out;
-+ }
-+
-+ ret = misc_register(&ar2315_wdt_miscdev);
-+ if(ret)
-+ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
-+
-+out:
-+ return ret;
-+}
-+
-+static int
-+ar2315_wdt_remove(struct platform_device *dev)
-+{
-+ misc_deregister(&ar2315_wdt_miscdev);
-+ free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver ar2315_wdt_driver = {
-+ .probe = ar2315_wdt_probe,
-+ .remove = ar2315_wdt_remove,
-+ .driver = {
-+ .name = "ar2315_wdt",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init
-+init_ar2315_wdt(void)
-+{
-+ int ret = platform_driver_register(&ar2315_wdt_driver);
-+ if(ret)
-+ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
-+ return ret;
-+}
-+
-+static void __exit
-+exit_ar2315_wdt(void)
-+{
-+ platform_driver_unregister(&ar2315_wdt_driver);
-+}
-+
-+module_init(init_ar2315_wdt);
-+module_exit(exit_ar2315_wdt);
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -857,6 +857,12 @@ config TXX9_WDT
- help
- Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-
-+config ATHEROS_WDT
-+ tristate "Atheros wisoc Watchdog Timer"
-+ depends on ATHEROS_AR231X
-+ help
-+ Hardware driver for the Atheros wisoc Watchdog Timer.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -113,6 +113,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
-
- # PARISC Architecture
-
diff --git a/target/linux/atheros/patches-2.6.34/140-redboot_partition_scan.patch b/target/linux/atheros/patches-2.6.34/140-redboot_partition_scan.patch
deleted file mode 100644
index 289d4eb990..0000000000
--- a/target/linux/atheros/patches-2.6.34/140-redboot_partition_scan.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
- }
- } else {
- offset = directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- offset += master->erasesize;
- if (offset == master->size)
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
--
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-
-@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
diff --git a/target/linux/atheros/patches-2.6.34/141-redboot_various_erase_size_fix.patch b/target/linux/atheros/patches-2.6.34/141-redboot_various_erase_size_fix.patch
deleted file mode 100644
index b9cb0b4bcd..0000000000
--- a/target/linux/atheros/patches-2.6.34/141-redboot_various_erase_size_fix.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -39,6 +39,22 @@ static inline int redboot_checksum(struc
- return 1;
- }
-
-+static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset)
-+{
-+ struct mtd_erase_region_info *regions = mtd->eraseregions;
-+ int i;
-+
-+ for (i = 0; i < mtd->numeraseregions; i++) {
-+ if (regions[i].offset +
-+ regions[i].numblocks * regions[i].erasesize <= offset)
-+ continue;
-+
-+ return regions[i].erasesize;
-+ }
-+
-+ return mtd->erasesize;
-+}
-+
- static int parse_redboot_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long fis_origin)
-@@ -55,6 +71,7 @@ static int parse_redboot_partitions(stru
- int namelen = 0;
- int nulllen = 0;
- int numslots;
-+ int first_slot;
- unsigned long offset;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- static char nullstring[] = "unallocated";
-@@ -168,7 +185,10 @@ static int parse_redboot_partitions(stru
- goto out;
- }
-
-- for (i = 0; i < numslots; i++) {
-+ first_slot = (buf[i].flash_base & (master->erasesize - 1)) /
-+ sizeof(struct fis_image_desc);
-+
-+ for (i = first_slot; i < first_slot + numslots; i++) {
- struct fis_list *new_fl, **prev;
-
- if (buf[i].name[0] == 0xff) {
-@@ -244,12 +264,13 @@ static int parse_redboot_partitions(stru
- }
- #endif
- for ( ; i<nrparts; i++) {
-- if(max_offset < buf[i].flash_base + buf[i].size)
-- max_offset = buf[i].flash_base + buf[i].size;
- parts[i].size = fl->img->size;
- parts[i].offset = fl->img->flash_base;
- parts[i].name = names;
-
-+ if (max_offset < parts[i].offset + parts[i].size)
-+ max_offset = parts[i].offset + parts[i].size;
-+
- strcpy(names, fl->img->name);
- #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY
- if (!memcmp(names, "RedBoot", 8) ||
-@@ -279,7 +300,9 @@ static int parse_redboot_partitions(stru
- fl = fl->next;
- kfree(tmp_fl);
- }
-- if(master->size - max_offset >= master->erasesize)
-+
-+ if (master->size - max_offset >=
-+ mtd_get_offset_erasesize(master, max_offset))
- {
- parts[nrparts].size = master->size - max_offset;
- parts[nrparts].offset = max_offset;
diff --git a/target/linux/atheros/patches-2.6.34/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.34/200-ar2313_enable_mvswitch.patch
deleted file mode 100644
index 60025e43ea..0000000000
--- a/target/linux/atheros/patches-2.6.34/200-ar2313_enable_mvswitch.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/drivers/net/ar231x.c
-+++ b/drivers/net/ar231x.c
-@@ -735,6 +735,7 @@ static void ar231x_load_rx_ring(struct n
- for (i = 0; i < nr_bufs; i++) {
- struct sk_buff *skb;
- ar231x_descr_t *rd;
-+ int offset = RX_OFFSET;
-
- if (sp->rx_skb[idx])
- break;
-@@ -750,7 +751,9 @@ static void ar231x_load_rx_ring(struct n
- * Make sure IP header starts on a fresh cache line.
- */
- skb->dev = dev;
-- skb_reserve(skb, RX_OFFSET);
-+ if (sp->phy_dev)
-+ offset += sp->phy_dev->pkt_align;
-+ skb_reserve(skb, offset);
- sp->rx_skb[idx] = skb;
-
- rd = (ar231x_descr_t *) & sp->rx_ring[idx];
-@@ -824,20 +827,23 @@ static int ar231x_rx_int(struct net_devi
- /* alloc new buffer. */
- skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
- if (skb_new != NULL) {
-+ int offset;
-
- skb = sp->rx_skb[idx];
- /* set skb */
- skb_put(skb,
- ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
--
- dev->stats.rx_bytes += skb->len;
-- skb->protocol = eth_type_trans(skb, dev);
-- /* pass the packet to upper layers */
-- netif_rx(skb);
-
-+ /* pass the packet to upper layers */
-+ sp->rx(skb);
- skb_new->dev = dev;
-+
- /* 16 bit align */
-- skb_reserve(skb_new, RX_OFFSET);
-+ offset = RX_OFFSET;
-+ if (sp->phy_dev)
-+ offset += sp->phy_dev->pkt_align;
-+ skb_reserve(skb_new, offset);
- /* reset descriptor's curr_addr */
- rxdesc->addr = virt_to_phys(skb_new->data);
-
-@@ -1239,6 +1245,8 @@ static int ar231x_mdiobus_probe (struct
- return PTR_ERR(phydev);
- }
-
-+ sp->rx = phydev->netif_rx;
-+
- /* mask with MAC supported features */
- phydev->supported &= (SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
---- a/drivers/net/ar231x.h
-+++ b/drivers/net/ar231x.h
-@@ -221,6 +221,8 @@ typedef struct {
- */
- struct ar231x_private {
- struct net_device *dev;
-+ int (*rx)(struct sk_buff *skb);
-+
- int version;
- u32 mb[2];
-
diff --git a/target/linux/atheros/patches-2.6.34/210-reset_button.patch b/target/linux/atheros/patches-2.6.34/210-reset_button.patch
deleted file mode 100644
index 3c91818146..0000000000
--- a/target/linux/atheros/patches-2.6.34/210-reset_button.patch
+++ /dev/null
@@ -1,174 +0,0 @@
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -8,7 +8,7 @@
- # Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
- #
-
--obj-y += board.o prom.o devices.o
-+obj-y += board.o prom.o devices.o reset.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
---- /dev/null
-+++ b/arch/mips/ar231x/reset.c
-@@ -0,0 +1,160 @@
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/kobject.h>
-+#include <linux/workqueue.h>
-+#include <linux/skbuff.h>
-+#include <linux/netlink.h>
-+#include <net/sock.h>
-+#include <asm/uaccess.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include <gpio.h>
-+#include "devices.h"
-+
-+#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(ar231x_board.config->resetConfigGpio))
-+
-+struct event_t {
-+ struct work_struct wq;
-+ int set;
-+ unsigned long jiffies;
-+};
-+
-+static struct timer_list rst_button_timer;
-+static unsigned long seen;
-+
-+extern struct sock *uevent_sock;
-+extern u64 uevent_next_seqnum(void);
-+
-+static int no_release_workaround = 1;
-+module_param(no_release_workaround, int, 0);
-+
-+static inline void
-+add_msg(struct sk_buff *skb, char *msg)
-+{
-+ char *scratch;
-+ scratch = skb_put(skb, strlen(msg) + 1);
-+ sprintf(scratch, msg);
-+}
-+
-+static void
-+hotplug_button(struct work_struct *wq)
-+{
-+ struct sk_buff *skb;
-+ struct event_t *event;
-+ size_t len;
-+ char *scratch, *s;
-+ char buf[128];
-+
-+ event = container_of(wq, struct event_t, wq);
-+ if (!uevent_sock)
-+ goto done;
-+
-+ /* allocate message with the maximum possible size */
-+ s = event->set ? "pressed" : "released";
-+ len = strlen(s) + 2;
-+ skb = alloc_skb(NLMSG_GOODSIZE, GFP_KERNEL);
-+ if (!skb)
-+ goto done;
-+
-+ /* add header */
-+ scratch = skb_put(skb, len);
-+ sprintf(scratch, "%s@",s);
-+
-+ /* copy keys to our continuous event payload buffer */
-+ add_msg(skb, "HOME=/");
-+ add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin");
-+ add_msg(skb, "SUBSYSTEM=button");
-+ add_msg(skb, "BUTTON=reset");
-+ add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released"));
-+ sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ);
-+ add_msg(skb, buf);
-+ snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
-+ add_msg(skb, buf);
-+
-+ NETLINK_CB(skb).dst_group = 1;
-+ netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
-+
-+done:
-+ kfree(event);
-+}
-+
-+static void
-+reset_button_poll(unsigned long unused)
-+{
-+ struct event_t *event;
-+ int gpio = ~0;
-+
-+ if(!no_release_workaround)
-+ return;
-+
-+ gpio = ar231x_gpiodev->get();
-+ gpio &= (1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE));
-+ if(gpio) {
-+ rst_button_timer.expires = jiffies + (HZ / 4);
-+ add_timer(&rst_button_timer);
-+ return;
-+ }
-+
-+ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
-+ if (!event)
-+ return;
-+
-+ event->set = 0;
-+ event->jiffies = jiffies;
-+ INIT_WORK(&event->wq, hotplug_button);
-+ schedule_work(&event->wq);
-+}
-+
-+static irqreturn_t
-+button_handler(int irq, void *dev_id)
-+{
-+ static int pressed = 0;
-+ struct event_t *event;
-+ u32 gpio = ~0;
-+
-+ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
-+ if (!event)
-+ return IRQ_NONE;
-+
-+ pressed = !pressed;
-+
-+ gpio = ar231x_gpiodev->get() & (1 << (irq - AR531X_GPIO_IRQ_BASE));
-+
-+ event->set = gpio;
-+ if(!event->set)
-+ no_release_workaround = 0;
-+
-+ event->jiffies = jiffies;
-+
-+ INIT_WORK(&event->wq, hotplug_button);
-+ schedule_work(&event->wq);
-+
-+ seen = jiffies;
-+ if(event->set && no_release_workaround)
-+ mod_timer(&rst_button_timer, jiffies + (HZ / 4));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int __init
-+ar231x_init_reset(void)
-+{
-+ seen = jiffies;
-+
-+ if (ar231x_board.config->resetConfigGpio == 0xffff)
-+ return -ENODEV;
-+
-+ init_timer(&rst_button_timer);
-+ rst_button_timer.function = reset_button_poll;
-+ rst_button_timer.expires = jiffies + HZ / 50;
-+ add_timer(&rst_button_timer);
-+
-+ request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar231x_reset", NULL);
-+
-+ return 0;
-+}
-+
-+module_init(ar231x_init_reset);
diff --git a/target/linux/atheros/patches-2.6.34/220-enet_micrel_workaround.patch b/target/linux/atheros/patches-2.6.34/220-enet_micrel_workaround.patch
deleted file mode 100644
index 989bd76068..0000000000
--- a/target/linux/atheros/patches-2.6.34/220-enet_micrel_workaround.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/drivers/net/ar231x.c
-+++ b/drivers/net/ar231x.c
-@@ -148,6 +148,7 @@ static int ar231x_mdiobus_write(struct m
- static int ar231x_mdiobus_reset(struct mii_bus *bus);
- static int ar231x_mdiobus_probe (struct net_device *dev);
- static void ar231x_adjust_link(struct net_device *dev);
-+static bool no_phy = false;
-
- #ifndef ERR
- #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-@@ -278,6 +279,21 @@ int __init ar231x_probe(struct platform_
-
- mdiobus_register(sp->mii_bus);
-
-+ /* Workaround for Micrel switch, which is only available on
-+ * one PHY and cannot be configured through MDIO */
-+ if (!no_phy) {
-+ u32 phy_id = 0;
-+ get_phy_id(sp->mii_bus, 1, &phy_id);
-+ if (phy_id == 0x00221450)
-+ no_phy = true;
-+ }
-+ if (no_phy) {
-+ sp->link = 1;
-+ netif_carrier_on(dev);
-+ return 0;
-+ }
-+ no_phy = true;
-+
- if (ar231x_mdiobus_probe(dev) != 0) {
- printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
- rx_tasklet_cleanup(dev);
-@@ -334,8 +350,10 @@ static int __devexit ar231x_remove(struc
- rx_tasklet_cleanup(dev);
- ar231x_init_cleanup(dev);
- unregister_netdev(dev);
-- mdiobus_unregister(sp->mii_bus);
-- mdiobus_free(sp->mii_bus);
-+ if (sp->mii_bus) {
-+ mdiobus_unregister(sp->mii_bus);
-+ mdiobus_free(sp->mii_bus);
-+ }
- kfree(dev);
- return 0;
- }
-@@ -836,7 +854,12 @@ static int ar231x_rx_int(struct net_devi
- dev->stats.rx_bytes += skb->len;
-
- /* pass the packet to upper layers */
-- sp->rx(skb);
-+ if (sp->rx) {
-+ sp->rx(skb);
-+ } else {
-+ skb->protocol = eth_type_trans(skb, skb->dev);
-+ netif_rx(skb);
-+ }
- skb_new->dev = dev;
-
- /* 16 bit align */
-@@ -1123,6 +1146,9 @@ static int ar231x_ioctl(struct net_devic
- struct ar231x_private *sp = netdev_priv(dev);
- int ret;
-
-+ if (!sp->phy_dev)
-+ return -ENODEV;
-+
- switch (cmd) {
-
- case SIOCETHTOOL:
diff --git a/target/linux/atheros/patches-2.6.35/001-get_c0_compare_int_fix.patch b/target/linux/atheros/patches-2.6.35/001-get_c0_compare_int_fix.patch
deleted file mode 100644
index 43da96c3fe..0000000000
--- a/target/linux/atheros/patches-2.6.35/001-get_c0_compare_int_fix.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Fix the usage of get_c0_compare_int: override cp0_compare_irq if the returned
-value is in the MIPS CPU IRQ range to ensure that c0_compare_int_usable()
-still works.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -168,20 +168,23 @@ int __cpuinit r4k_clockevent_init(void)
- struct clock_event_device *cd;
- unsigned int irq;
-
-- if (!cpu_has_counter || !mips_hpt_frequency)
-- return -ENXIO;
--
-- if (!c0_compare_int_usable())
-- return -ENXIO;
--
- /*
- * With vectored interrupts things are getting platform specific.
- * get_c0_compare_int is a hook to allow a platform to return the
- * interrupt number of it's liking.
- */
- irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
-- if (get_c0_compare_int)
-+ if (get_c0_compare_int) {
- irq = get_c0_compare_int();
-+ if ((irq >= MIPS_CPU_IRQ_BASE) && (irq < MIPS_CPU_IRQ_BASE + 8))
-+ cp0_compare_irq = irq - MIPS_CPU_IRQ_BASE;
-+ }
-+
-+ if (!cpu_has_counter || !mips_hpt_frequency)
-+ return -ENXIO;
-+
-+ if (!c0_compare_int_usable())
-+ return -ENXIO;
-
- cd = &per_cpu(mips_clockevent_device, cpu);
-
diff --git a/target/linux/atheros/patches-2.6.35/100-board.patch b/target/linux/atheros/patches-2.6.35/100-board.patch
deleted file mode 100644
index 0731de1f73..0000000000
--- a/target/linux/atheros/patches-2.6.35/100-board.patch
+++ /dev/null
@@ -1,3126 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -84,6 +84,19 @@ config BCM63XX
- help
- Support for BCM63XX based boards
-
-+config ATHEROS_AR231X
-+ bool "Atheros 231x/531x SoC support"
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select GENERIC_GPIO
-+ help
-+ Support for AR231x and AR531x based boards
-+
- config MIPS_COBALT
- bool "Cobalt Server"
- select CEVT_R4K
-@@ -681,6 +694,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
-
- endchoice
-
-+source "arch/mips/ar231x/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -319,6 +319,13 @@ cflags-$(CONFIG_SOC_AU1X00) += -I$(srctr
-
-
- #
-+# Atheros AR5312/AR2312 WiSoC
-+#
-+core-$(CONFIG_ATHEROS_AR231X) += arch/mips/ar231x/
-+cflags-$(CONFIG_ATHEROS_AR231X) += -I$(srctree)/arch/mips/include/asm/mach-ar231x
-+load-$(CONFIG_ATHEROS_AR231X) += 0xffffffff80041000
-+
-+#
- # Cobalt Server
- #
- core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
---- /dev/null
-+++ b/arch/mips/ar231x/Kconfig
-@@ -0,0 +1,17 @@
-+config ATHEROS_AR5312
-+ bool "Atheros 5312/2312+ support"
-+ depends on ATHEROS_AR231X
-+ default y
-+
-+config ATHEROS_AR2315
-+ bool "Atheros 2315+ support"
-+ depends on ATHEROS_AR231X
-+ select DMA_NONCOHERENT
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select GENERIC_GPIO
-+ default y
---- /dev/null
-+++ b/arch/mips/ar231x/Makefile
-@@ -0,0 +1,13 @@
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License. See the file "COPYING" in the main directory of this archive
-+# for more details.
-+#
-+# Copyright (C) 2006 FON Technology, SL.
-+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+#
-+
-+obj-y += board.o prom.o devices.o
-+obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
-+obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
---- /dev/null
-+++ b/arch/mips/ar231x/board.c
-@@ -0,0 +1,251 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/random.h>
-+#include <linux/etherdevice.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/reboot.h>
-+#include <asm/io.h>
-+
-+#include <ar231x_platform.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+void (*ar231x_irq_dispatch)(void);
-+
-+static inline bool
-+check_radio_magic(u8 *addr)
-+{
-+ addr += 0x7a; /* offset for flash magic */
-+ if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static inline bool
-+check_board_data(u8 *flash_limit, u8 *addr, bool broken)
-+{
-+ /* config magic found */
-+ if (*((u32 *)addr) == AR531X_BD_MAGIC)
-+ return 1;
-+
-+ if (!broken)
-+ return 0;
-+
-+ if (check_radio_magic(addr + 0xf8))
-+ ar231x_board.radio = addr + 0xf8;
-+ if ((addr < flash_limit + 0x10000) &&
-+ check_radio_magic(addr + 0x10000))
-+ ar231x_board.radio = addr + 0x10000;
-+
-+ if (ar231x_board.radio) {
-+ /* broken board data detected, use radio data to find the offset,
-+ * user will fix this */
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static u8 *
-+find_board_config(u8 *flash_limit, bool broken)
-+{
-+ u8 *addr;
-+ int found = 0;
-+
-+ for (addr = flash_limit - 0x1000;
-+ addr >= flash_limit - 0x30000;
-+ addr -= 0x1000) {
-+
-+ if (check_board_data(flash_limit, addr, broken)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ if (!found)
-+ addr = NULL;
-+
-+ return addr;
-+}
-+
-+static u8 *
-+find_radio_config(u8 *flash_limit, u8 *board_config)
-+{
-+ int found;
-+ u8 *radio_config;
-+
-+ /*
-+ * Now find the start of Radio Configuration data, using heuristics:
-+ * Search forward from Board Configuration data by 0x1000 bytes
-+ * at a time until we find non-0xffffffff.
-+ */
-+ found = 0;
-+ for (radio_config = board_config + 0x1000;
-+ (radio_config < flash_limit);
-+ radio_config += 0x1000) {
-+ if ((*(u32 *)radio_config != 0xffffffff) &&
-+ check_radio_magic(radio_config)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ /* AR2316 relocates radio config to new location */
-+ if (!found) {
-+ for (radio_config = board_config + 0xf8;
-+ (radio_config < flash_limit - 0x1000 + 0xf8);
-+ radio_config += 0x1000) {
-+ if ((*(u32 *)radio_config != 0xffffffff) &&
-+ check_radio_magic(radio_config)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (!found) {
-+ printk("Could not find Radio Configuration data\n");
-+ radio_config = 0;
-+ }
-+
-+ return (u8 *) radio_config;
-+}
-+
-+int __init
-+ar231x_find_config(u8 *flash_limit)
-+{
-+ struct ar231x_boarddata *config;
-+ unsigned int rcfg_size;
-+ int broken_boarddata = 0;
-+ u8 *bcfg, *rcfg;
-+ u8 *board_data;
-+ u8 *radio_data;
-+ u32 offset;
-+
-+ ar231x_board.config = NULL;
-+ ar231x_board.radio = NULL;
-+ /* Copy the board and radio data to RAM, because accessing the mapped
-+ * memory of the flash directly after booting is not safe */
-+
-+ /* Try to find valid board and radio data */
-+ bcfg = find_board_config(flash_limit, false);
-+
-+ /* If that fails, try to at least find valid radio data */
-+ if (!bcfg) {
-+ bcfg = find_board_config(flash_limit, true);
-+ broken_boarddata = 1;
-+ }
-+
-+ if (!bcfg) {
-+ printk(KERN_WARNING "WARNING: No board configuration data found!\n");
-+ return -ENODEV;
-+ }
-+
-+ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
-+ ar231x_board.config = (struct ar231x_boarddata *) board_data;
-+ memcpy(board_data, bcfg, 0x100);
-+ if (broken_boarddata) {
-+ printk(KERN_WARNING "WARNING: broken board data detected\n");
-+ config = ar231x_board.config;
-+ if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
-+ printk(KERN_INFO "Fixing up empty mac addresses\n");
-+ config->resetConfigGpio = 0xffff;
-+ config->sysLedGpio = 0xffff;
-+ random_ether_addr(config->wlan0_mac);
-+ config->wlan0_mac[0] &= ~0x06;
-+ random_ether_addr(config->enet0_mac);
-+ random_ether_addr(config->enet1_mac);
-+ }
-+ }
-+
-+
-+ /* Radio config starts 0x100 bytes after board config, regardless
-+ * of what the physical layout on the flash chip looks like */
-+
-+ if (ar231x_board.radio)
-+ rcfg = (u8 *) ar231x_board.radio;
-+ else
-+ rcfg = find_radio_config(flash_limit, bcfg);
-+
-+ if (!rcfg)
-+ return -ENODEV;
-+
-+ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
-+ ar231x_board.radio = radio_data;
-+ offset = radio_data - board_data;
-+ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset);
-+ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
-+ memcpy(radio_data, rcfg, rcfg_size);
-+
-+ return 0;
-+}
-+
-+static void
-+ar231x_halt(void)
-+{
-+ local_irq_disable();
-+ while (1);
-+}
-+
-+void __init
-+plat_mem_setup(void)
-+{
-+ _machine_halt = ar231x_halt;
-+ pm_power_off = ar231x_halt;
-+
-+ ar5312_plat_setup();
-+ ar2315_plat_setup();
-+
-+ /* Disable data watchpoints */
-+ write_c0_watchlo0(0);
-+}
-+
-+
-+asmlinkage void
-+plat_irq_dispatch(void)
-+{
-+ ar231x_irq_dispatch();
-+}
-+
-+void __init
-+plat_time_init(void)
-+{
-+ ar5312_time_init();
-+ ar2315_time_init();
-+}
-+
-+unsigned int __cpuinit
-+get_c0_compare_int(void)
-+{
-+ return CP0_LEGACY_COMPARE_IRQ;
-+}
-+
-+void __init
-+arch_init_irq(void)
-+{
-+ clear_c0_status(ST0_IM);
-+ mips_cpu_irq_init();
-+
-+ /* Initialize interrupt controllers */
-+ ar5312_irq_init();
-+ ar2315_irq_init();
-+}
-+
-+
---- /dev/null
-+++ b/arch/mips/ar231x/prom.c
-@@ -0,0 +1,37 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright MontaVista Software Inc
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Prom setup file for ar531x
-+ */
-+
-+#include <linux/init.h>
-+#include <generated/autoconf.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/bootinfo.h>
-+#include <asm/addrspace.h>
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+void __init prom_init(void)
-+{
-+ ar5312_prom_init();
-+ ar2315_prom_init();
-+}
-+
-+void __init prom_free_prom_memory(void)
-+{
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
-@@ -0,0 +1,83 @@
-+#ifndef __AR531X_PLATFORM_H
-+#define __AR531X_PLATFORM_H
-+
-+/*
-+ * This is board-specific data that is stored in a "fixed" location in flash.
-+ * It is shared across operating systems, so it should not be changed lightly.
-+ * The main reason we need it is in order to extract the ethernet MAC
-+ * address(es).
-+ */
-+struct ar231x_boarddata {
-+ u32 magic; /* board data is valid */
-+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
-+ u16 cksum; /* checksum (starting with BD_REV 2) */
-+ u16 rev; /* revision of this struct */
-+#define BD_REV 4
-+ char boardName[64]; /* Name of board */
-+ u16 major; /* Board major number */
-+ u16 minor; /* Board minor number */
-+ u32 flags; /* Board configuration */
-+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
-+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
-+#define BD_UART1 0x00000004 /* UART1 is stuffed */
-+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
-+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
-+#define BD_SYSLED 0x00000020 /* System LED stuffed */
-+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
-+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
-+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
-+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
-+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
-+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
-+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
-+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
-+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
-+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
-+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
-+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
-+ u16 resetConfigGpio; /* Reset factory GPIO pin */
-+ u16 sysLedGpio; /* System LED GPIO pin */
-+
-+ u32 cpuFreq; /* CPU core frequency in Hz */
-+ u32 sysFreq; /* System frequency in Hz */
-+ u32 cntFreq; /* Calculated C0_COUNT frequency */
-+
-+ u8 wlan0_mac[6];
-+ u8 enet0_mac[6];
-+ u8 enet1_mac[6];
-+
-+ u16 pciId; /* Pseudo PCIID for common code */
-+ u16 memCap; /* cap bank1 in MB */
-+
-+ /* version 3 */
-+ u8 wlan1_mac[6]; /* (ar5212) */
-+};
-+
-+#define BOARD_CONFIG_BUFSZ 0x1000
-+
-+/*
-+ * Platform device information for the Wireless MAC
-+ */
-+struct ar231x_board_config {
-+ u16 devid;
-+
-+ /* board config data */
-+ struct ar231x_boarddata *config;
-+
-+ /* radio calibration data */
-+ const char *radio;
-+};
-+
-+/*
-+ * Platform device information for the Ethernet MAC
-+ */
-+struct ar231x_eth {
-+ u32 reset_base;
-+ u32 reset_mac;
-+ u32 reset_phy;
-+ u32 phy_base;
-+ struct ar231x_board_config *config;
-+ char *macaddr;
-+};
-+
-+#endif /* __AR531X_PLATFORM_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
-@@ -0,0 +1,84 @@
-+/*
-+ * Atheros SoC specific CPU feature overrides
-+ *
-+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was derived from: include/asm-mips/cpu-features.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ * Copyright (C) 2004 Maciej W. Rozycki
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
-+
-+/*
-+ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
-+ */
-+#define cpu_has_tlb 1
-+#define cpu_has_4kex 1
-+#define cpu_has_3k_cache 0
-+#define cpu_has_4k_cache 1
-+#define cpu_has_tx39_cache 0
-+#define cpu_has_sb1_cache 0
-+#define cpu_has_fpu 0
-+#define cpu_has_32fpr 0
-+#define cpu_has_counter 1
-+/* #define cpu_has_watch ? */
-+/* #define cpu_has_divec ? */
-+/* #define cpu_has_vce ? */
-+/* #define cpu_has_cache_cdex_p ? */
-+/* #define cpu_has_cache_cdex_s ? */
-+/* #define cpu_has_prefetch ? */
-+/* #define cpu_has_mcheck ? */
-+#define cpu_has_ejtag 1
-+
-+#if !defined(CONFIG_ATHEROS_AR5312)
-+# define cpu_has_llsc 1
-+#else
-+/*
-+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
-+ * ll/sc instructions.
-+ */
-+# define cpu_has_llsc 0
-+#endif
-+
-+#define cpu_has_mips16 0
-+#define cpu_has_mdmx 0
-+#define cpu_has_mips3d 0
-+#define cpu_has_smartmips 0
-+
-+/* #define cpu_has_vtag_icache ? */
-+/* #define cpu_has_dc_aliases ? */
-+/* #define cpu_has_ic_fills_f_dc ? */
-+/* #define cpu_has_pindexed_dcache ? */
-+
-+/* #define cpu_icache_snoops_remote_store ? */
-+
-+#define cpu_has_mips32r1 1
-+
-+#if !defined(CONFIG_ATHEROS_AR5312)
-+# define cpu_has_mips32r2 1
-+#endif
-+
-+#define cpu_has_mips64r1 0
-+#define cpu_has_mips64r2 0
-+
-+#define cpu_has_dsp 0
-+#define cpu_has_mipsmt 0
-+
-+/* #define cpu_has_nofpuex ? */
-+#define cpu_has_64bits 0
-+#define cpu_has_64bit_zero_reg 0
-+#define cpu_has_64bit_gp_regs 0
-+#define cpu_has_64bit_addresses 0
-+
-+/* #define cpu_has_inclusive_pcaches ? */
-+
-+/* #define cpu_dcache_line_size() ? */
-+/* #define cpu_icache_line_size() ? */
-+
-+#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h
-@@ -0,0 +1,64 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
-+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ */
-+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
-+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
-+
-+#define PCI_DMA_OFFSET 0x20000000
-+
-+struct device;
-+
-+static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-+{
-+ return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
-+}
-+
-+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
-+{
-+ return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
-+}
-+
-+static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-+ dma_addr_t dma_addr)
-+{
-+ return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
-+}
-+
-+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-+ size_t size, enum dma_data_direction direction)
-+{
-+}
-+
-+static inline int plat_dma_supported(struct device *dev, u64 mask)
-+{
-+ return 1;
-+}
-+
-+static inline void plat_extra_sync_for_device(struct device *dev)
-+{
-+ return;
-+}
-+
-+static inline int plat_dma_mapping_error(struct device *dev,
-+ dma_addr_t dma_addr)
-+{
-+ return 0;
-+}
-+
-+static inline int plat_device_is_coherent(struct device *dev)
-+{
-+#ifdef CONFIG_DMA_COHERENT
-+ return 1;
-+#endif
-+#ifdef CONFIG_DMA_NONCOHERENT
-+ return 0;
-+#endif
-+}
-+
-+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/gpio.h
-@@ -0,0 +1,79 @@
-+#ifndef _ATHEROS_GPIO_H_
-+#define _ATHEROS_GPIO_H_
-+
-+#include <ar231x.h>
-+
-+struct ar231x_gpiodev {
-+ u32 valid_mask;
-+ u32 (*get_output)(void);
-+ u32 (*set_output)(u32 mask, u32 val);
-+ u32 (*get)(void);
-+ u32 (*set)(u32 mask, u32 val);
-+};
-+
-+extern const struct ar231x_gpiodev *ar231x_gpiodev;
-+
-+/*
-+ * Wrappers for the generic GPIO layer
-+ */
-+
-+static inline int gpio_direction_input(unsigned gpio) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return -ENXIO;
-+
-+ ar231x_gpiodev->set_output(mask, 0);
-+ return 0;
-+}
-+
-+static inline void gpio_set_value(unsigned gpio, int value) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return;
-+
-+ ar231x_gpiodev->set(mask, (!!value) * mask);
-+}
-+
-+static inline int gpio_direction_output(unsigned gpio, int value) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return -ENXIO;
-+
-+ ar231x_gpiodev->set_output(mask, mask);
-+ ar231x_gpiodev->set(mask, (!!value) * mask);
-+ return 0;
-+}
-+
-+/* Reads the gpio pin. Unchecked function */
-+static inline int gpio_get_value(unsigned gpio) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return 0;
-+
-+ return !!(ar231x_gpiodev->get() & mask);
-+}
-+
-+static inline int gpio_request(unsigned gpio, const char *label) {
-+ return 0;
-+}
-+
-+static inline void gpio_free(unsigned gpio) {
-+}
-+
-+/* Returns IRQ to attach for gpio. Unchecked function */
-+static inline int gpio_to_irq(unsigned gpio) {
-+ return AR531X_GPIO_IRQ(gpio);
-+}
-+
-+/* Returns gpio for IRQ attached. Unchecked function */
-+static inline int irq_to_gpio(unsigned irq) {
-+ return (irq - (AR531X_GPIO_IRQ(0)));
-+}
-+
-+#include <asm-generic/gpio.h> /* cansleep wrappers */
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/reset.h
-@@ -0,0 +1,6 @@
-+#ifndef __AR531X_RESET_H
-+#define __AR531X_RESET_H
-+
-+void ar531x_disable_reset_button(void);
-+
-+#endif /* __AR531X_RESET_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/war.h
-@@ -0,0 +1,25 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
-+ */
-+#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
-+#define __ASM_MIPS_MACH_ATHEROS_WAR_H
-+
-+#define R4600_V1_INDEX_ICACHEOP_WAR 0
-+#define R4600_V1_HIT_CACHEOP_WAR 0
-+#define R4600_V2_HIT_CACHEOP_WAR 0
-+#define R5432_CP0_INTERRUPT_WAR 0
-+#define BCM1250_M3_WAR 0
-+#define SIBYTE_1956_WAR 0
-+#define MIPS4K_ICACHE_REFILL_WAR 0
-+#define MIPS_CACHE_SYNC_WAR 0
-+#define TX49XX_ICACHE_INDEX_INV_WAR 0
-+#define RM9000_CDEX_SMP_WAR 0
-+#define ICACHE_REFILLS_WORKAROUND_WAR 0
-+#define R10000_LLSC_WAR 0
-+#define MIPS34K_MISSED_ITLB_WAR 0
-+
-+#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
-@@ -0,0 +1,580 @@
-+/*
-+ * Register definitions for AR2315+
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef __AR2315_REG_H
-+#define __AR2315_REG_H
-+
-+/*
-+ * IRQs
-+ */
-+#define AR2315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR2315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR2315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR2315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-+#define AR2315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+
-+/*
-+ * Address map
-+ */
-+#define AR2315_SPI_READ 0x08000000 /* SPI FLASH */
-+#define AR2315_WLAN0 0xB0000000 /* Wireless MMR */
-+#define AR2315_PCI 0xB0100000 /* PCI MMR */
-+#define AR2315_SDRAMCTL 0xB0300000 /* SDRAM MMR */
-+#define AR2315_LOCAL 0xB0400000 /* LOCAL BUS MMR */
-+#define AR2315_ENET0 0xB0500000 /* ETHERNET MMR */
-+#define AR2315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */
-+#define AR2315_UART0 0xB1100003 /* UART MMR */
-+#define AR2315_SPI 0xB1300000 /* SPI FLASH MMR */
-+#define AR2315_PCIEXT 0x80000000 /* pci external */
-+
-+/*
-+ * Reset Register
-+ */
-+#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000)
-+
-+#define AR2315_RESET_COLD_AHB 0x00000001
-+#define AR2315_RESET_COLD_APB 0x00000002
-+#define AR2315_RESET_COLD_CPU 0x00000004
-+#define AR2315_RESET_COLD_CPUWARM 0x00000008
-+#define AR2315_RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
-+#define AR2317_RESET_SYSTEM 0x00000010
-+
-+
-+#define AR2315_RESET (AR2315_DSLBASE + 0x0004)
-+
-+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
-+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
-+#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
-+#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
-+#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */
-+#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */
-+#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
-+#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI interface */
-+#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */
-+#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
-+#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
-+#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
-+
-+/*
-+ * AHB master arbitration control
-+ */
-+#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008)
-+
-+#define AR2315_ARB_CPU 0x00000001 /* CPU, default */
-+#define AR2315_ARB_WLAN 0x00000002 /* WLAN */
-+#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
-+#define AR2315_ARB_LOCAL 0x00000008 /* LOCAL */
-+#define AR2315_ARB_PCI 0x00000010 /* PCI */
-+#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */
-+#define AR2315_ARB_RETRY 0x00000100 /* retry policy, debug only */
-+
-+/*
-+ * Config Register
-+ */
-+#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c)
-+
-+#define AR2315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
-+#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
-+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
-+#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */
-+#define AR2315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
-+#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
-+#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
-+
-+#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
-+#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */
-+#define AR2315_CONFIG_PCIAHB 0x00000800
-+#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
-+#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */
-+#define AR2315_CONFIG_CPU_DRAM 0x00010000
-+#define AR2315_CONFIG_CPU_PCI 0x00020000
-+#define AR2315_CONFIG_CPU_MMR 0x00040000
-+#define AR2315_CONFIG_BIG 0x00000400
-+
-+
-+/*
-+ * NMI control
-+ */
-+#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010)
-+
-+#define AR2315_NMI_EN 1
-+
-+/*
-+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
-+ */
-+#define AR2315_SREV (AR2315_DSLBASE + 0x0014)
-+
-+#define AR2315_REV_MAJ 0x00f0
-+#define AR2315_REV_MAJ_S 4
-+#define AR2315_REV_MIN 0x000f
-+#define AR2315_REV_MIN_S 0
-+#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN)
-+
-+/*
-+ * Interface Enable
-+ */
-+#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018)
-+
-+#define AR2315_IF_MASK 0x00000007
-+#define AR2315_IF_DISABLED 0
-+#define AR2315_IF_PCI 1
-+#define AR2315_IF_TS_LOCAL 2
-+#define AR2315_IF_ALL 3 /* only for emulation with separate pins */
-+#define AR2315_IF_LOCAL_HOST 0x00000008
-+#define AR2315_IF_PCI_HOST 0x00000010
-+#define AR2315_IF_PCI_INTR 0x00000020
-+#define AR2315_IF_PCI_CLK_MASK 0x00030000
-+#define AR2315_IF_PCI_CLK_INPUT 0
-+#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
-+#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
-+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
-+#define AR2315_IF_PCI_CLK_SHIFT 16
-+
-+/*
-+ * APB Interrupt control
-+ */
-+
-+#define AR2315_ISR (AR2315_DSLBASE + 0x0020)
-+#define AR2315_IMR (AR2315_DSLBASE + 0x0024)
-+#define AR2315_GISR (AR2315_DSLBASE + 0x0028)
-+
-+#define AR2315_ISR_UART0 0x0001 /* high speed UART */
-+#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */
-+#define AR2315_ISR_SPI 0x0004 /* SPI bus */
-+#define AR2315_ISR_AHB 0x0008 /* AHB error */
-+#define AR2315_ISR_APB 0x0010 /* APB error */
-+#define AR2315_ISR_TIMER 0x0020 /* timer */
-+#define AR2315_ISR_GPIO 0x0040 /* GPIO */
-+#define AR2315_ISR_WD 0x0080 /* watchdog */
-+#define AR2315_ISR_IR_RSVD 0x0100 /* IR */
-+
-+#define AR2315_GISR_MISC 0x0001
-+#define AR2315_GISR_WLAN0 0x0002
-+#define AR2315_GISR_MPEGTS_RSVD 0x0004
-+#define AR2315_GISR_LOCALPCI 0x0008
-+#define AR2315_GISR_WMACPOLL 0x0010
-+#define AR2315_GISR_TIMER 0x0020
-+#define AR2315_GISR_ETHERNET 0x0040
-+
-+/*
-+ * Interrupt routing from IO to the processor IP bits
-+ * Define our inter mask and level
-+ */
-+#define AR2315_INTR_MISCIO SR_IBIT3
-+#define AR2315_INTR_WLAN0 SR_IBIT4
-+#define AR2315_INTR_ENET0 SR_IBIT5
-+#define AR2315_INTR_LOCALPCI SR_IBIT6
-+#define AR2315_INTR_WMACPOLL SR_IBIT7
-+#define AR2315_INTR_COMPARE SR_IBIT8
-+
-+/*
-+ * Timers
-+ */
-+#define AR2315_TIMER (AR2315_DSLBASE + 0x0030)
-+#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034)
-+#define AR2315_WD (AR2315_DSLBASE + 0x0038)
-+#define AR2315_WDC (AR2315_DSLBASE + 0x003c)
-+
-+#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000
-+#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */
-+#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */
-+
-+/*
-+ * CPU Performance Counters
-+ */
-+#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048)
-+#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c)
-+
-+#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */
-+#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */
-+#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */
-+#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */
-+#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */
-+#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
-+#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
-+
-+#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */
-+#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */
-+#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
-+#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
-+#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */
-+#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */
-+#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */
-+
-+/*
-+ * AHB Error Reporting.
-+ */
-+#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */
-+#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */
-+#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */
-+#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */
-+#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */
-+
-+#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
-+ /* write 1 to clear all bits in ERR0 */
-+#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
-+#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
-+
-+#define AR2315_PROCERR_HMAST 0x0000000f
-+#define AR2315_PROCERR_HMAST_DFLT 0
-+#define AR2315_PROCERR_HMAST_WMAC 1
-+#define AR2315_PROCERR_HMAST_ENET 2
-+#define AR2315_PROCERR_HMAST_PCIENDPT 3
-+#define AR2315_PROCERR_HMAST_LOCAL 4
-+#define AR2315_PROCERR_HMAST_CPU 5
-+#define AR2315_PROCERR_HMAST_PCITGT 6
-+
-+#define AR2315_PROCERR_HMAST_S 0
-+#define AR2315_PROCERR_HWRITE 0x00000010
-+#define AR2315_PROCERR_HSIZE 0x00000060
-+#define AR2315_PROCERR_HSIZE_S 5
-+#define AR2315_PROCERR_HTRANS 0x00000180
-+#define AR2315_PROCERR_HTRANS_S 7
-+#define AR2315_PROCERR_HBURST 0x00000e00
-+#define AR2315_PROCERR_HBURST_S 9
-+
-+/*
-+ * Clock Control
-+ */
-+#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064)
-+#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068)
-+#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c)
-+#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070)
-+#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074)
-+#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080)
-+#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084)
-+
-+/* PLLc Control fields */
-+#define PLLC_REF_DIV_M 0x00000003
-+#define PLLC_REF_DIV_S 0
-+#define PLLC_FDBACK_DIV_M 0x0000007C
-+#define PLLC_FDBACK_DIV_S 2
-+#define PLLC_ADD_FDBACK_DIV_M 0x00000080
-+#define PLLC_ADD_FDBACK_DIV_S 7
-+#define PLLC_CLKC_DIV_M 0x0001c000
-+#define PLLC_CLKC_DIV_S 14
-+#define PLLC_CLKM_DIV_M 0x00700000
-+#define PLLC_CLKM_DIV_S 20
-+
-+/* CPU CLK Control fields */
-+#define CPUCLK_CLK_SEL_M 0x00000003
-+#define CPUCLK_CLK_SEL_S 0
-+#define CPUCLK_CLK_DIV_M 0x0000000c
-+#define CPUCLK_CLK_DIV_S 2
-+
-+/* AMBA CLK Control fields */
-+#define AMBACLK_CLK_SEL_M 0x00000003
-+#define AMBACLK_CLK_SEL_S 0
-+#define AMBACLK_CLK_DIV_M 0x0000000c
-+#define AMBACLK_CLK_DIV_S 2
-+
-+/*
-+ * GPIO
-+ */
-+#define AR2315_GPIO_DI (AR2315_DSLBASE + 0x0088)
-+#define AR2315_GPIO_DO (AR2315_DSLBASE + 0x0090)
-+#define AR2315_GPIO_CR (AR2315_DSLBASE + 0x0098)
-+#define AR2315_GPIO_INT (AR2315_DSLBASE + 0x00a0)
-+
-+#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
-+#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */
-+#define AR2315_GPIO_CR_I(x) (0) /* input */
-+
-+#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */
-+#define AR2315_GPIO_INT_M (0x3F) /* mask for int */
-+#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */
-+#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */
-+
-+#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */
-+#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */
-+#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */
-+#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */
-+#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */
-+
-+#define AR2315_RESET_GPIO 5
-+#define AR2315_NUM_GPIO 22
-+
-+/*
-+ * PCI Clock Control
-+ */
-+#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4)
-+
-+#define AR2315_PCICLK_INPUT_M 0x3
-+#define AR2315_PCICLK_INPUT_S 0
-+
-+#define AR2315_PCICLK_PLLC_CLKM 0
-+#define AR2315_PCICLK_PLLC_CLKM1 1
-+#define AR2315_PCICLK_PLLC_CLKC 2
-+#define AR2315_PCICLK_REF_CLK 3
-+
-+#define AR2315_PCICLK_DIV_M 0xc
-+#define AR2315_PCICLK_DIV_S 2
-+
-+#define AR2315_PCICLK_IN_FREQ 0
-+#define AR2315_PCICLK_IN_FREQ_DIV_6 1
-+#define AR2315_PCICLK_IN_FREQ_DIV_8 2
-+#define AR2315_PCICLK_IN_FREQ_DIV_10 3
-+
-+/*
-+ * Observation Control Register
-+ */
-+#define AR2315_OCR (AR2315_DSLBASE + 0x00b0)
-+#define OCR_GPIO0_IRIN 0x0040
-+#define OCR_GPIO1_IROUT 0x0080
-+#define OCR_GPIO3_RXCLR 0x0200
-+
-+/*
-+ * General Clock Control
-+ */
-+
-+#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4)
-+#define MISCCLK_PLLBYPASS_EN 0x00000001
-+#define MISCCLK_PROCREFCLK 0x00000002
-+
-+/*
-+ * SDRAM Controller
-+ * - No read or write buffers are included.
-+ */
-+#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00)
-+#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c)
-+#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10)
-+
-+#define SDRAM_DATA_WIDTH_M 0x00006000
-+#define SDRAM_DATA_WIDTH_S 13
-+
-+#define SDRAM_COL_WIDTH_M 0x00001E00
-+#define SDRAM_COL_WIDTH_S 9
-+
-+#define SDRAM_ROW_WIDTH_M 0x000001E0
-+#define SDRAM_ROW_WIDTH_S 5
-+
-+#define SDRAM_BANKADDR_BITS_M 0x00000018
-+#define SDRAM_BANKADDR_BITS_S 3
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+
-+#define AR2315_SPI_CTL (AR2315_SPI + 0x00)
-+#define AR2315_SPI_OPCODE (AR2315_SPI + 0x04)
-+#define AR2315_SPI_DATA (AR2315_SPI + 0x08)
-+
-+#define SPI_CTL_START 0x00000100
-+#define SPI_CTL_BUSY 0x00010000
-+#define SPI_CTL_TXCNT_MASK 0x0000000f
-+#define SPI_CTL_RXCNT_MASK 0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
-+#define SPI_CTL_SIZE_MASK 0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK 0x03000000
-+#define SPI_OPCODE_MASK 0x000000ff
-+
-+/*
-+ * PCI Bus Interface Registers
-+ */
-+#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008)
-+#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c)
-+#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
-+#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
-+#define AR2315_PCIMISC_RST_MODE 0x00000030
-+#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
-+#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
-+#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
-+#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
-+#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
-+#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
-+#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
-+#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
-+
-+#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010)
-+
-+#define AR2315_PCI_UNCACHE_CFG (AR2315_PCI + 0x0014)
-+
-+#define AR2315_PCI_IN_EN (AR2315_PCI + 0x0100)
-+#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */
-+#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */
-+#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */
-+#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */
-+
-+#define AR2315_PCI_IN_DIS (AR2315_PCI + 0x0104)
-+#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
-+#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
-+#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
-+#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
-+
-+#define AR2315_PCI_IN_PTR (AR2315_PCI + 0x0200)
-+
-+#define AR2315_PCI_OUT_EN (AR2315_PCI + 0x0400)
-+#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
-+
-+#define AR2315_PCI_OUT_DIS (AR2315_PCI + 0x0404)
-+#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
-+
-+#define AR2315_PCI_OUT_PTR (AR2315_PCI + 0x0408)
-+
-+#define AR2315_PCI_INT_STATUS (AR2315_PCI + 0x0500) /* write one to clr */
-+#define AR2315_PCI_TXINT 0x00000001 /* Desc In Completed */
-+#define AR2315_PCI_TXOK 0x00000002 /* Desc In OK */
-+#define AR2315_PCI_TXERR 0x00000004 /* Desc In ERR */
-+#define AR2315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
-+#define AR2315_PCI_RXINT 0x00000010 /* Desc Out Completed */
-+#define AR2315_PCI_RXOK 0x00000020 /* Desc Out OK */
-+#define AR2315_PCI_RXERR 0x00000040 /* Desc Out ERR */
-+#define AR2315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
-+#define AR2315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
-+#define AR2315_PCI_MASK 0x0000FFFF /* Desc Mask */
-+#define AR2315_PCI_EXT_INT 0x02000000
-+#define AR2315_PCI_ABORT_INT 0x04000000
-+
-+#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */
-+
-+#define AR2315_PCI_INTEN_REG (AR2315_PCI + 0x0508)
-+#define AR2315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
-+#define AR2315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
-+
-+#define AR2315_PCI_HOST_IN_EN (AR2315_PCI + 0x0800)
-+#define AR2315_PCI_HOST_IN_DIS (AR2315_PCI + 0x0804)
-+#define AR2315_PCI_HOST_IN_PTR (AR2315_PCI + 0x0810)
-+#define AR2315_PCI_HOST_OUT_EN (AR2315_PCI + 0x0900)
-+#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904)
-+#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908)
-+
-+
-+/*
-+ * Local Bus Interface Registers
-+ */
-+#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000)
-+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
-+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
-+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
-+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
-+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
-+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
-+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
-+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
-+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
-+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
-+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
-+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
-+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
-+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
-+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
-+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
-+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
-+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
-+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
-+#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
-+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
-+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
-+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
-+
-+#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004)
-+#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */
-+
-+#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008)
-+#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C)
-+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
-+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
-+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
-+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
-+#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80
-+#define AR2315_LBM_TIMEOUT_SHFT 7
-+#define AR2315_LBM_PORTMUX 0x07000000
-+
-+
-+#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010)
-+
-+#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100)
-+#define AR2315_LB_TXEN_0 0x01
-+#define AR2315_LB_TXEN_1 0x02
-+#define AR2315_LB_TXEN_2 0x04
-+#define AR2315_LB_TXEN_3 0x08
-+
-+#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104)
-+#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200)
-+
-+#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400)
-+#define AR2315_LB_RXEN 0x01
-+
-+#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404)
-+#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408)
-+
-+#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500)
-+#define AR2315_INT_TX_DESC 0x0001
-+#define AR2315_INT_TX_OK 0x0002
-+#define AR2315_INT_TX_ERR 0x0004
-+#define AR2315_INT_TX_EOF 0x0008
-+#define AR2315_INT_RX_DESC 0x0010
-+#define AR2315_INT_RX_OK 0x0020
-+#define AR2315_INT_RX_ERR 0x0040
-+#define AR2315_INT_RX_EOF 0x0080
-+#define AR2315_INT_TX_TRUNC 0x0100
-+#define AR2315_INT_TX_STARVE 0x0200
-+#define AR2315_INT_LB_TIMEOUT 0x0400
-+#define AR2315_INT_LB_ERR 0x0800
-+#define AR2315_INT_MBOX_WR 0x1000
-+#define AR2315_INT_MBOX_RD 0x2000
-+
-+/* Bit definitions for INT MASK are the same as INT_STATUS */
-+#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504)
-+
-+#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508)
-+#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600)
-+
-+/*
-+ * IR Interface Registers
-+ */
-+#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000)
-+
-+#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */
-+
-+#define AR2315_IR_CONTROL (AR2315_IR + 0x0800)
-+#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */
-+#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */
-+#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
-+#define AR2315_IRCTL_SAMPLECLK_SHFT 1
-+#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
-+#define AR2315_IRCTL_OUTPUTCLK_SHFT 14
-+
-+#define AR2315_IR_STATUS (AR2315_IR + 0x0804)
-+#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */
-+#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */
-+
-+#define AR2315_IR_CONFIG (AR2315_IR + 0x0808)
-+#define AR2315_IRCFG_INVIN 0x00000001 /* invert input polarity */
-+#define AR2315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
-+#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
-+#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
-+#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
-+#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
-+#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
-+#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
-+#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
-+
-+#define HOST_PCI_DEV_ID 3
-+#define HOST_PCI_MBAR0 0x10000000
-+#define HOST_PCI_MBAR1 0x20000000
-+#define HOST_PCI_MBAR2 0x30000000
-+
-+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
-+#define PCI_DEVICE_MEM_SPACE 0x800000
-+
-+#endif /* __AR2315_REG_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
-@@ -0,0 +1,236 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef AR5312_H
-+#define AR5312_H
-+
-+#include <asm/addrspace.h>
-+
-+/*
-+ * IRQs
-+ */
-+
-+#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-+#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+
-+
-+/* Address Map */
-+#define AR531X_WLAN0 0x18000000
-+#define AR531X_WLAN1 0x18500000
-+#define AR531X_ENET0 0x18100000
-+#define AR531X_ENET1 0x18200000
-+#define AR531X_SDRAMCTL 0x18300000
-+#define AR531X_FLASHCTL 0x18400000
-+#define AR531X_APBBASE 0x1c000000
-+#define AR531X_FLASH 0x1e000000
-+#define AR531X_UART0 0xbc000003 /* UART MMR */
-+
-+/*
-+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
-+ * should be considered available. The AR5312 supports 2 enet MACS,
-+ * even though many reference boards only actually use 1 of them
-+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
-+ * The AR2312 supports 1 enet MAC.
-+ */
-+#define AR531X_NUM_ENET_MAC 2
-+
-+/*
-+ * Need these defines to determine true number of ethernet MACs
-+ */
-+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
-+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
-+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
-+#define AR531X_RADIO_MASK_OFF 0xc8
-+#define AR531X_RADIO0_MASK 0x0003
-+#define AR531X_RADIO1_MASK 0x000c
-+#define AR531X_RADIO1_S 2
-+
-+/*
-+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
-+ * should be considered available.
-+ */
-+#define AR531X_NUM_WMAC 2
-+
-+/* Reset/Timer Block Address Map */
-+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
-+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
-+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
-+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
-+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
-+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
-+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
-+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
-+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
-+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
-+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
-+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
-+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
-+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
-+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
-+
-+/* AR531X_WD_CTRL register bit field definitions */
-+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
-+#define AR531X_WD_CTRL_NMI 0x0001
-+#define AR531X_WD_CTRL_RESET 0x0002
-+
-+/* AR531X_ISR register bit field definitions */
-+#define AR531X_ISR_NONE 0x0000
-+#define AR531X_ISR_TIMER 0x0001
-+#define AR531X_ISR_AHBPROC 0x0002
-+#define AR531X_ISR_AHBDMA 0x0004
-+#define AR531X_ISR_GPIO 0x0008
-+#define AR531X_ISR_UART0 0x0010
-+#define AR531X_ISR_UART0DMA 0x0020
-+#define AR531X_ISR_WD 0x0040
-+#define AR531X_ISR_LOCAL 0x0080
-+
-+/* AR531X_RESET register bit field definitions */
-+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
-+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
-+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
-+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
-+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
-+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
-+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
-+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
-+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
-+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
-+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
-+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
-+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
-+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
-+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
-+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
-+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
-+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
-+
-+#define AR531X_RESET_WMAC0_BITS \
-+ AR531X_RESET_WLAN0 |\
-+ AR531X_RESET_WARM_WLAN0_MAC |\
-+ AR531X_RESET_WARM_WLAN0_BB
-+
-+#define AR531X_RESERT_WMAC1_BITS \
-+ AR531X_RESET_WLAN1 |\
-+ AR531X_RESET_WARM_WLAN1_MAC |\
-+ AR531X_RESET_WARM_WLAN1_BB
-+
-+/* AR5312_CLOCKCTL1 register bit field definitions */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-+
-+/* Valid for AR5312 and AR2312 */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-+
-+/* Valid for AR2313 */
-+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
-+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
-+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
-+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
-+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
-+
-+
-+/* AR531X_ENABLE register bit field definitions */
-+#define AR531X_ENABLE_WLAN0 0x0001
-+#define AR531X_ENABLE_ENET0 0x0002
-+#define AR531X_ENABLE_ENET1 0x0004
-+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
-+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
-+#define AR531X_ENABLE_WLAN1 \
-+ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
-+
-+/* AR531X_REV register bit field definitions */
-+#define AR531X_REV_WMAC_MAJ 0xf000
-+#define AR531X_REV_WMAC_MAJ_S 12
-+#define AR531X_REV_WMAC_MIN 0x0f00
-+#define AR531X_REV_WMAC_MIN_S 8
-+#define AR531X_REV_MAJ 0x00f0
-+#define AR531X_REV_MAJ_S 4
-+#define AR531X_REV_MIN 0x000f
-+#define AR531X_REV_MIN_S 0
-+#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
-+
-+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define AR531X_REV_MAJ_AR5312 0x4
-+#define AR531X_REV_MAJ_AR2313 0x5
-+
-+/* Minor revision numbers, bits 3..0 of Revision ID register */
-+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
-+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
-+
-+/* AR531X_FLASHCTL register bit field definitions */
-+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
-+#define FLASHCTL_IDCY_S 0
-+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
-+#define FLASHCTL_WST1_S 5
-+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
-+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
-+#define FLASHCTL_WST2_S 11
-+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
-+#define FLASHCTL_AC_S 16
-+#define FLASHCTL_AC_128K 0x00000000
-+#define FLASHCTL_AC_256K 0x00010000
-+#define FLASHCTL_AC_512K 0x00020000
-+#define FLASHCTL_AC_1M 0x00030000
-+#define FLASHCTL_AC_2M 0x00040000
-+#define FLASHCTL_AC_4M 0x00050000
-+#define FLASHCTL_AC_8M 0x00060000
-+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
-+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
-+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
-+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
-+#define FLASHCTL_WP 0x04000000 /* Write protect */
-+#define FLASHCTL_BM 0x08000000 /* Burst mode */
-+#define FLASHCTL_MW 0x30000000 /* Memory width */
-+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
-+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
-+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
-+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
-+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
-+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
-+
-+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
-+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
-+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
-+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
-+
-+/* ARM SDRAM Controller -- just enough to determine memory size */
-+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
-+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
-+#define MEM_CFG1_AC0_S 8
-+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
-+#define MEM_CFG1_AC1_S 12
-+
-+/* GPIO Address Map */
-+#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
-+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
-+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
-+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
-+
-+/* GPIO Control Register bit field definitions */
-+#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
-+#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
-+#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
-+#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
-+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
-+#define AR531X_NUM_GPIO 8
-+
-+
-+#endif
-+
---- /dev/null
-+++ b/arch/mips/ar231x/ar5312.c
-@@ -0,0 +1,549 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Platform devices for Atheros SoCs
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/leds.h>
-+#include <asm/bootinfo.h>
-+#include <asm/reboot.h>
-+#include <asm/time.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <gpio.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar5312_regs.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+
-+static void
-+ar5312_misc_irq_dispatch(void)
-+{
-+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR);
-+
-+ if (ar231x_misc_intrs & AR531X_ISR_TIMER) {
-+ do_IRQ(AR531X_MISC_IRQ_TIMER);
-+ (void)ar231x_read_reg(AR531X_TIMER);
-+ } else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC)
-+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-+ else if ((ar231x_misc_intrs & AR531X_ISR_UART0))
-+ do_IRQ(AR531X_MISC_IRQ_UART0);
-+ else if (ar231x_misc_intrs & AR531X_ISR_WD)
-+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-+ else
-+ do_IRQ(AR531X_MISC_IRQ_NONE);
-+}
-+
-+static asmlinkage void
-+ar5312_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP2)
-+ do_IRQ(AR5312_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP3)
-+ do_IRQ(AR5312_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR5312_IRQ_ENET1_INTRS);
-+ else if (pending & CAUSEF_IP5)
-+ do_IRQ(AR5312_IRQ_WLAN1_INTRS);
-+ else if (pending & CAUSEF_IP6)
-+ ar5312_misc_irq_dispatch();
-+ else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
-+}
-+
-+
-+/* Enable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar5312_misc_intr_enable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR531X_IMR);
-+ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-+ ar231x_write_reg(AR531X_IMR, imr);
-+}
-+
-+/* Disable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar5312_misc_intr_disable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR531X_IMR);
-+ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-+ ar231x_write_reg(AR531X_IMR, imr);
-+ ar231x_read_reg(AR531X_IMR); /* flush write buffer */
-+}
-+
-+static void
-+ar5312_misc_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar5312_misc_intr_enable(irq);
-+}
-+
-+static struct irq_chip ar5312_misc_intr_controller = {
-+ .name = "AR5312-MISC",
-+ .disable = ar5312_misc_intr_disable,
-+ .ack = ar5312_misc_intr_disable,
-+ .mask_ack = ar5312_misc_intr_disable,
-+ .mask = ar5312_misc_intr_disable,
-+ .unmask = ar5312_misc_intr_enable,
-+ .end = ar5312_misc_intr_end,
-+};
-+
-+
-+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ u32 proc1 = ar231x_read_reg(AR531X_PROC1);
-+ u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */
-+ u32 dma1 = ar231x_read_reg(AR531X_DMA1);
-+ u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR); /* clears error state */
-+
-+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
-+ procAddr, proc1, dmaAddr, dma1);
-+
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static struct irqaction ar5312_ahb_proc_interrupt = {
-+ .handler = ar5312_ahb_proc_handler,
-+ .flags = IRQF_DISABLED,
-+ .name = "ar5312_ahb_proc_interrupt",
-+};
-+
-+
-+static struct irqaction cascade = {
-+ .handler = no_action,
-+ .flags = IRQF_DISABLED,
-+ .name = "cascade",
-+};
-+
-+void __init ar5312_irq_init(void)
-+{
-+ int i;
-+
-+ if (!is_5312())
-+ return;
-+
-+ ar231x_irq_dispatch = ar5312_irq_dispatch;
-+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
-+ int irq = AR531X_MISC_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar5312_misc_intr_controller,
-+ handle_level_irq);
-+ }
-+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
-+ setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
-+}
-+
-+const struct ar231x_gpiodev ar5312_gpiodev;
-+
-+static u32
-+ar5312_gpio_get_output(void)
-+{
-+ u32 reg;
-+ reg = ~(ar231x_read_reg(AR531X_GPIO_CR));
-+ reg &= ar5312_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_set_output(u32 mask, u32 val)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR531X_GPIO_CR);
-+ reg |= mask;
-+ reg &= ~val;
-+ ar231x_write_reg(AR531X_GPIO_CR, reg);
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_get(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR531X_GPIO_DI);
-+ reg &= ar5312_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_set(u32 mask, u32 value)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR531X_GPIO_DO);
-+ reg &= ~mask;
-+ reg |= value;
-+ ar231x_write_reg(AR531X_GPIO_DO, reg);
-+ return reg;
-+}
-+
-+const struct ar231x_gpiodev ar5312_gpiodev = {
-+ .valid_mask = (1 << 8) - 1,
-+ .get_output = ar5312_gpio_get_output,
-+ .set_output = ar5312_gpio_set_output,
-+ .get = ar5312_gpio_get,
-+ .set = ar5312_gpio_set,
-+};
-+
-+static struct physmap_flash_data ar5312_flash_data = {
-+ .width = 2,
-+};
-+
-+static struct resource ar5312_flash_resource = {
-+ .start = AR531X_FLASH,
-+ .end = AR531X_FLASH + 0x800000 - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct ar231x_eth ar5312_eth0_data = {
-+ .reset_base = AR531X_RESET,
-+ .reset_mac = AR531X_RESET_ENET0,
-+ .reset_phy = AR531X_RESET_EPHY0,
-+ .phy_base = KSEG1ADDR(AR531X_ENET0),
-+ .config = &ar231x_board,
-+};
-+
-+static struct ar231x_eth ar5312_eth1_data = {
-+ .reset_base = AR531X_RESET,
-+ .reset_mac = AR531X_RESET_ENET1,
-+ .reset_phy = AR531X_RESET_EPHY1,
-+ .phy_base = KSEG1ADDR(AR531X_ENET1),
-+ .config = &ar231x_board,
-+};
-+
-+static struct platform_device ar5312_physmap_flash = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .dev.platform_data = &ar5312_flash_data,
-+ .resource = &ar5312_flash_resource,
-+ .num_resources = 1,
-+};
-+
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar5312_leds[] = {
-+ { .name = "wlan", .gpio = 0, .active_low = 1, },
-+};
-+
-+static const struct gpio_led_platform_data ar5312_led_data = {
-+ .num_leds = ARRAY_SIZE(ar5312_leds),
-+ .leds = (void *) ar5312_leds,
-+};
-+
-+static struct platform_device ar5312_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = (void *) &ar5312_led_data,
-+};
-+#endif
-+
-+/*
-+ * NB: This mapping size is larger than the actual flash size,
-+ * but this shouldn't be a problem here, because the flash
-+ * will simply be mapped multiple times.
-+ */
-+static char __init *ar5312_flash_limit(void)
-+{
-+ u32 ctl;
-+ /*
-+ * Configure flash bank 0.
-+ * Assume 8M window size. Flash will be aliased if it's smaller
-+ */
-+ ctl = FLASHCTL_E |
-+ FLASHCTL_AC_8M |
-+ FLASHCTL_RBLE |
-+ (0x01 << FLASHCTL_IDCY_S) |
-+ (0x07 << FLASHCTL_WST1_S) |
-+ (0x07 << FLASHCTL_WST2_S) |
-+ (ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW);
-+
-+ ar231x_write_reg(AR531X_FLASHCTL0, ctl);
-+
-+ /* Disable other flash banks */
-+ ar231x_write_reg(AR531X_FLASHCTL1,
-+ ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+ ar231x_write_reg(AR531X_FLASHCTL2,
-+ ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
-+}
-+
-+int __init ar5312_init_devices(void)
-+{
-+ struct ar231x_boarddata *config;
-+ u32 fctl = 0;
-+ const u8 *radio;
-+ u8 *c;
-+
-+ if (!is_5312())
-+ return 0;
-+
-+ /* Locate board/radio config data */
-+ ar231x_find_config(ar5312_flash_limit());
-+ config = ar231x_board.config;
-+
-+
-+ /*
-+ * Chip IDs and hardware detection for some Atheros
-+ * models are really broken!
-+ *
-+ * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
-+ * as indication for AR2312, which is otherwise
-+ * indistinguishable from the real AR5312.
-+ */
-+ if (ar231x_board.radio) {
-+ radio = ar231x_board.radio + AR531X_RADIO_MASK_OFF;
-+ if ((*((const u32 *) radio) & AR531X_RADIO0_MASK) == 0)
-+ config->flags |= BD_ISCASPER;
-+ } else
-+ radio = NULL;
-+
-+ /* AR2313 has CPU minor rev. 10 */
-+ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
-+ ar231x_devtype = DEV_TYPE_AR2313;
-+
-+ /* AR2312 shares the same Silicon ID as AR5312 */
-+ else if (config->flags & BD_ISCASPER)
-+ ar231x_devtype = DEV_TYPE_AR2312;
-+
-+ /* Everything else is probably AR5312 or compatible */
-+ else
-+ ar231x_devtype = DEV_TYPE_AR5312;
-+
-+ /* fixup flash width */
-+ fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW;
-+ switch (fctl) {
-+ case FLASHCTL_MWx16:
-+ ar5312_flash_data.width = 2;
-+ break;
-+ case FLASHCTL_MWx8:
-+ default:
-+ ar5312_flash_data.width = 1;
-+ break;
-+ }
-+
-+ platform_device_register(&ar5312_physmap_flash);
-+
-+#ifdef CONFIG_LEDS_GPIO
-+ ar5312_leds[0].gpio = config->sysLedGpio;
-+ platform_device_register(&ar5312_gpio_leds);
-+#endif
-+
-+ /* Fix up MAC addresses if necessary */
-+ if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6))
-+ memcpy(config->enet0_mac, config->enet1_mac, 6);
-+
-+ /* If ENET0 and ENET1 have the same mac address,
-+ * increment the one from ENET1 */
-+ if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) {
-+ c = config->enet1_mac + 5;
-+ while ((c >= config->enet1_mac) && !(++(*c)))
-+ c--;
-+ }
-+
-+ switch(ar231x_devtype) {
-+ case DEV_TYPE_AR5312:
-+ ar5312_eth0_data.macaddr = config->enet0_mac;
-+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
-+ AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data);
-+
-+ ar5312_eth1_data.macaddr = config->enet1_mac;
-+ ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1),
-+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
-+
-+ if (!ar231x_board.radio)
-+ return 0;
-+
-+ if ((*((u32 *) radio) & AR531X_RADIO0_MASK) &&
-+ (config->flags & BD_WLAN0))
-+ ar231x_add_wmac(0, AR531X_WLAN0,
-+ AR5312_IRQ_WLAN0_INTRS);
-+
-+ break;
-+ /*
-+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
-+ * of ENET1. Atheros calls it 'twisted' for a reason :)
-+ */
-+ case DEV_TYPE_AR2312:
-+ case DEV_TYPE_AR2313:
-+ ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base;
-+ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
-+ ar5312_eth1_data.macaddr = config->enet0_mac;
-+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1),
-+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
-+
-+ if (!ar231x_board.radio)
-+ return 0;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ if ((*((u32 *) radio) & AR531X_RADIO1_MASK) &&
-+ (config->flags & BD_WLAN1))
-+ ar231x_add_wmac(1, AR531X_WLAN1,
-+ AR5312_IRQ_WLAN1_INTRS);
-+
-+ return 0;
-+}
-+
-+
-+static void ar5312_restart(char *command)
-+{
-+ /* reset the system */
-+ local_irq_disable();
-+ while(1) {
-+ ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM);
-+ }
-+}
-+
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
-+
-+
-+static int __init
-+ar5312_cpu_frequency(void)
-+{
-+ unsigned int result;
-+ unsigned int predivide_mask, predivide_shift;
-+ unsigned int multiplier_mask, multiplier_shift;
-+ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
-+ unsigned int doubler_mask;
-+ u16 devid;
-+
-+ /* Trust the bootrom's idea of cpu frequency. */
-+ if ((result = ar231x_read_reg(AR5312_SCRATCH)))
-+ return result;
-+
-+ devid = ar231x_read_reg(AR531X_REV);
-+ devid &= AR531X_REV_MAJ;
-+ devid >>= AR531X_REV_MAJ_S;
-+ if (devid == AR531X_REV_MAJ_AR2313) {
-+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
-+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
-+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
-+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
-+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
-+ } else { /* AR5312 and AR2312 */
-+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
-+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
-+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
-+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
-+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
-+ }
-+
-+ /*
-+ * Clocking is derived from a fixed 40MHz input clock.
-+ *
-+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
-+ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
-+ * flash, Timer, Watchdog Timer)
-+ *
-+ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
-+ *
-+ * So, for example, with a PLL multiplier of 5, we have
-+ *
-+ * cpuFreq = 200MHz
-+ * sysFreq = 50MHz
-+ * cntFreq = 100MHz
-+ *
-+ * We compute the CPU frequency, based on PLL settings.
-+ */
-+
-+ clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1);
-+ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
-+ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
-+ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
-+
-+ if (clockCtl1 & doubler_mask) {
-+ multiplier = multiplier << 1;
-+ }
-+ return (40000000 / preDivisor) * multiplier;
-+}
-+
-+static inline int
-+ar5312_sys_frequency(void)
-+{
-+ return ar5312_cpu_frequency() / 4;
-+}
-+
-+void __init
-+ar5312_time_init(void)
-+{
-+ if (!is_5312())
-+ return;
-+
-+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
-+}
-+
-+
-+void __init
-+ar5312_prom_init(void)
-+{
-+ u32 memsize, memcfg, bank0AC, bank1AC;
-+ u32 devid;
-+
-+ if (!is_5312())
-+ return;
-+
-+ /* Detect memory size */
-+ memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
-+ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
-+ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
-+ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
-+ + (bank1AC ? (1 << (bank1AC+1)) : 0);
-+ memsize <<= 20;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ devid = ar231x_read_reg(AR531X_REV);
-+ devid >>= AR531X_REV_WMAC_MIN_S;
-+ devid &= AR531X_REV_CHIP;
-+ ar231x_board.devid = (u16) devid;
-+ ar231x_gpiodev = &ar5312_gpiodev;
-+}
-+
-+void __init
-+ar5312_plat_setup(void)
-+{
-+ if (!is_5312())
-+ return;
-+
-+ /* Clear any lingering AHB errors */
-+ ar231x_read_reg(AR531X_PROCADDR);
-+ ar231x_read_reg(AR531X_DMAADDR);
-+ ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
-+
-+ _machine_restart = ar5312_restart;
-+ ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
-+}
-+
---- /dev/null
-+++ b/arch/mips/ar231x/ar2315.c
-@@ -0,0 +1,658 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Platform devices for Atheros SoCs
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/delay.h>
-+#include <linux/leds.h>
-+#include <asm/bootinfo.h>
-+#include <asm/reboot.h>
-+#include <asm/time.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <asm/gpio.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar2315_regs.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar2315.h"
-+
-+static u32 gpiointmask = 0, gpiointval = 0;
-+
-+static inline void ar2315_gpio_irq(void)
-+{
-+ u32 pend;
-+ int bit = -1;
-+
-+ /* only do one gpio interrupt at a time */
-+ pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask;
-+
-+ if (pend) {
-+ bit = fls(pend) - 1;
-+ pend &= ~(1 << bit);
-+ gpiointval ^= (1 << bit);
-+ }
-+
-+ if (!pend)
-+ ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO);
-+
-+ /* Enable interrupt with edge detection */
-+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(bit)) != AR2315_GPIO_CR_I(bit))
-+ return;
-+
-+ if (bit >= 0)
-+ do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
-+}
-+
-+
-+/*
-+ * Called when an interrupt is received, this function
-+ * determines exactly which interrupt it was, and it
-+ * invokes the appropriate handler.
-+ *
-+ * Implicitly, we also define interrupt priority by
-+ * choosing which to dispatch first.
-+ */
-+static asmlinkage void
-+ar2315_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP3)
-+ do_IRQ(AR2315_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR2315_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP2) {
-+ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
-+
-+ if (misc_intr & AR2315_ISR_SPI)
-+ do_IRQ(AR531X_MISC_IRQ_SPI);
-+ else if (misc_intr & AR2315_ISR_TIMER)
-+ do_IRQ(AR531X_MISC_IRQ_TIMER);
-+ else if (misc_intr & AR2315_ISR_AHB)
-+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-+ else if (misc_intr & AR2315_ISR_GPIO)
-+ ar2315_gpio_irq();
-+ else if (misc_intr & AR2315_ISR_UART0)
-+ do_IRQ(AR531X_MISC_IRQ_UART0);
-+ else if (misc_intr & AR2315_ISR_WD)
-+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-+ else
-+ do_IRQ(AR531X_MISC_IRQ_NONE);
-+ } else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
-+}
-+
-+static void ar2315_set_gpiointmask(int gpio, int level)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR2315_GPIO_INT);
-+ reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M);
-+ reg |= gpio | AR2315_GPIO_INT_LVL(level);
-+ ar231x_write_reg(AR2315_GPIO_INT, reg);
-+}
-+
-+static void ar2315_gpio_intr_enable(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* Enable interrupt with edge detection */
-+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(gpio)) != AR2315_GPIO_CR_I(gpio))
-+ return;
-+
-+ gpiointmask |= (1 << gpio);
-+ ar2315_set_gpiointmask(gpio, 3);
-+}
-+
-+static unsigned int ar2315_gpio_intr_startup(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* reconfigure GPIO line as input */
-+ ar231x_mask_reg(AR2315_GPIO_CR, AR2315_GPIO_CR_M(gpio), AR2315_GPIO_CR_I(gpio));
-+ ar2315_gpio_intr_enable(irq);
-+ return 0;
-+}
-+
-+static void ar2315_gpio_intr_disable(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* Disable interrupt */
-+ gpiointmask &= ~(1 << gpio);
-+ ar2315_set_gpiointmask(gpio, 0);
-+}
-+
-+static void
-+ar2315_gpio_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar2315_gpio_intr_enable(irq);
-+}
-+
-+static struct irq_chip ar2315_gpio_intr_controller = {
-+ .typename = "AR2315-GPIO",
-+ .startup = ar2315_gpio_intr_startup,
-+ .ack = ar2315_gpio_intr_disable,
-+ .mask_ack = ar2315_gpio_intr_disable,
-+ .mask = ar2315_gpio_intr_disable,
-+ .unmask = ar2315_gpio_intr_enable,
-+ .end = ar2315_gpio_intr_end,
-+};
-+
-+static void
-+ar2315_misc_intr_enable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR2315_IMR);
-+ switch(irq) {
-+ case AR531X_MISC_IRQ_SPI:
-+ imr |= AR2315_ISR_SPI;
-+ break;
-+ case AR531X_MISC_IRQ_TIMER:
-+ imr |= AR2315_ISR_TIMER;
-+ break;
-+ case AR531X_MISC_IRQ_AHB_PROC:
-+ imr |= AR2315_ISR_AHB;
-+ break;
-+ case AR531X_MISC_IRQ_GPIO:
-+ imr |= AR2315_ISR_GPIO;
-+ break;
-+ case AR531X_MISC_IRQ_UART0:
-+ imr |= AR2315_ISR_UART0;
-+ break;
-+ case AR531X_MISC_IRQ_WATCHDOG:
-+ imr |= AR2315_ISR_WD;
-+ break;
-+ default:
-+ break;
-+ }
-+ ar231x_write_reg(AR2315_IMR, imr);
-+}
-+
-+static void
-+ar2315_misc_intr_disable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR2315_IMR);
-+ switch(irq) {
-+ case AR531X_MISC_IRQ_SPI:
-+ imr &= ~AR2315_ISR_SPI;
-+ break;
-+ case AR531X_MISC_IRQ_TIMER:
-+ imr &= ~AR2315_ISR_TIMER;
-+ break;
-+ case AR531X_MISC_IRQ_AHB_PROC:
-+ imr &= ~AR2315_ISR_AHB;
-+ break;
-+ case AR531X_MISC_IRQ_GPIO:
-+ imr &= ~AR2315_ISR_GPIO;
-+ break;
-+ case AR531X_MISC_IRQ_UART0:
-+ imr &= ~AR2315_ISR_UART0;
-+ break;
-+ case AR531X_MISC_IRQ_WATCHDOG:
-+ imr &= ~AR2315_ISR_WD;
-+ break;
-+ default:
-+ break;
-+ }
-+ ar231x_write_reg(AR2315_IMR, imr);
-+}
-+
-+static void
-+ar2315_misc_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar2315_misc_intr_enable(irq);
-+}
-+
-+
-+static struct irq_chip ar2315_misc_intr_controller = {
-+ .typename = "AR2315-MISC",
-+ .ack = ar2315_misc_intr_disable,
-+ .mask_ack = ar2315_misc_intr_disable,
-+ .mask = ar2315_misc_intr_disable,
-+ .unmask = ar2315_misc_intr_enable,
-+ .end = ar2315_misc_intr_end,
-+};
-+
-+static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
-+ ar231x_read_reg(AR2315_AHB_ERR1);
-+
-+ printk(KERN_ERR "AHB fatal error\n");
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction ar2315_ahb_proc_interrupt = {
-+ .handler = ar2315_ahb_proc_handler,
-+ .flags = IRQF_DISABLED,
-+ .name = "ar2315_ahb_proc_interrupt",
-+};
-+
-+static struct irqaction cascade = {
-+ .handler = no_action,
-+ .flags = IRQF_DISABLED,
-+ .name = "cascade",
-+};
-+
-+void
-+ar2315_irq_init(void)
-+{
-+ int i;
-+
-+ if (!is_2315())
-+ return;
-+
-+ ar231x_irq_dispatch = ar2315_irq_dispatch;
-+ gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
-+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
-+ int irq = AR531X_MISC_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar2315_misc_intr_controller,
-+ handle_level_irq);
-+ }
-+ for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) {
-+ int irq = AR531X_GPIO_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar2315_gpio_intr_controller,
-+ handle_level_irq);
-+ }
-+ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
-+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt);
-+ setup_irq(AR2315_IRQ_MISC_INTRS, &cascade);
-+}
-+
-+const struct ar231x_gpiodev ar2315_gpiodev;
-+
-+static u32
-+ar2315_gpio_get_output(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_CR);
-+ reg &= ar2315_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_set_output(u32 mask, u32 val)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR2315_GPIO_CR);
-+ reg &= ~mask;
-+ reg |= val;
-+ ar231x_write_reg(AR2315_GPIO_CR, reg);
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_get(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_DI);
-+ reg &= ar2315_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_set(u32 mask, u32 value)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_DO);
-+ reg &= ~mask;
-+ reg |= value;
-+ ar231x_write_reg(AR2315_GPIO_DO, reg);
-+ return reg;
-+}
-+
-+const struct ar231x_gpiodev ar2315_gpiodev = {
-+ .valid_mask = (1 << 22) - 1,
-+ .get_output = ar2315_gpio_get_output,
-+ .set_output = ar2315_gpio_set_output,
-+ .get = ar2315_gpio_get,
-+ .set = ar2315_gpio_set,
-+};
-+
-+static struct ar231x_eth ar2315_eth_data = {
-+ .reset_base = AR2315_RESET,
-+ .reset_mac = AR2315_RESET_ENET0,
-+ .reset_phy = AR2315_RESET_EPHY0,
-+ .phy_base = AR2315_ENET0,
-+ .config = &ar231x_board,
-+};
-+
-+static struct resource ar2315_spiflash_res[] = {
-+ {
-+ .name = "flash_base",
-+ .flags = IORESOURCE_MEM,
-+ .start = KSEG1ADDR(AR2315_SPI_READ),
-+ .end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1,
-+ },
-+ {
-+ .name = "flash_regs",
-+ .flags = IORESOURCE_MEM,
-+ .start = 0x11300000,
-+ .end = 0x11300012,
-+ },
-+};
-+
-+static struct platform_device ar2315_spiflash = {
-+ .id = 0,
-+ .name = "spiflash",
-+ .resource = ar2315_spiflash_res,
-+ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
-+};
-+
-+static struct platform_device ar2315_wdt = {
-+ .id = 0,
-+ .name = "ar2315_wdt",
-+};
-+
-+#define SPI_FLASH_CTL 0x00
-+#define SPI_FLASH_OPCODE 0x04
-+#define SPI_FLASH_DATA 0x08
-+
-+static inline u32
-+spiflash_read_reg(int reg)
-+{
-+ return ar231x_read_reg(KSEG1ADDR(AR2315_SPI) + reg);
-+}
-+
-+static inline void
-+spiflash_write_reg(int reg, u32 data)
-+{
-+ ar231x_write_reg(KSEG1ADDR(AR2315_SPI) + reg, data);
-+}
-+
-+static u32
-+spiflash_wait_status(void)
-+{
-+ u32 reg;
-+
-+ do {
-+ reg = spiflash_read_reg(SPI_FLASH_CTL);
-+ } while (reg & SPI_CTL_BUSY);
-+
-+ return reg;
-+}
-+
-+static u8
-+spiflash_probe(void)
-+{
-+ u32 reg;
-+
-+ reg = spiflash_wait_status();
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= (1 << 4) | 4 | SPI_CTL_START;
-+
-+ spiflash_write_reg(SPI_FLASH_OPCODE, 0xab);
-+ spiflash_write_reg(SPI_FLASH_CTL, reg);
-+
-+ reg = spiflash_wait_status();
-+ reg = spiflash_read_reg(SPI_FLASH_DATA);
-+ reg &= 0xff;
-+
-+ return (u8) reg;
-+}
-+
-+
-+#define STM_8MBIT_SIGNATURE 0x13
-+#define STM_16MBIT_SIGNATURE 0x14
-+#define STM_32MBIT_SIGNATURE 0x15
-+#define STM_64MBIT_SIGNATURE 0x16
-+#define STM_128MBIT_SIGNATURE 0x17
-+
-+static u8 __init *
-+ar2315_flash_limit(void)
-+{
-+ u32 flash_size = 0;
-+
-+ /* probe the flash chip size */
-+ switch(spiflash_probe()) {
-+ case STM_8MBIT_SIGNATURE:
-+ flash_size = 0x00100000;
-+ break;
-+ case STM_16MBIT_SIGNATURE:
-+ flash_size = 0x00200000;
-+ break;
-+ case STM_32MBIT_SIGNATURE:
-+ flash_size = 0x00400000;
-+ break;
-+ case STM_64MBIT_SIGNATURE:
-+ flash_size = 0x00800000;
-+ break;
-+ case STM_128MBIT_SIGNATURE:
-+ flash_size = 0x01000000;
-+ break;
-+ }
-+
-+ ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start +
-+ flash_size - 1;
-+ return (u8 *) ar2315_spiflash_res[0].end + 1;
-+}
-+
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar2315_leds[6];
-+static struct gpio_led_platform_data ar2315_led_data = {
-+ .leds = (void *) ar2315_leds,
-+};
-+
-+static struct platform_device ar2315_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = (void *) &ar2315_led_data,
-+ }
-+};
-+
-+static void __init
-+ar2315_init_gpio(void)
-+{
-+ static char led_names[6][6];
-+ int i, led = 0;
-+
-+ ar2315_led_data.num_leds = 0;
-+ for(i = 1; i < 8; i++)
-+ {
-+ if((i == AR2315_RESET_GPIO) ||
-+ (i == ar231x_board.config->resetConfigGpio))
-+ continue;
-+
-+ if(i == ar231x_board.config->sysLedGpio)
-+ strcpy(led_names[led], "wlan");
-+ else
-+ sprintf(led_names[led], "gpio%d", i);
-+
-+ ar2315_leds[led].name = led_names[led];
-+ ar2315_leds[led].gpio = i;
-+ ar2315_leds[led].active_low = 0;
-+ led++;
-+ }
-+ ar2315_led_data.num_leds = led;
-+ platform_device_register(&ar2315_gpio_leds);
-+}
-+#else
-+static inline void ar2315_init_gpio(void)
-+{
-+}
-+#endif
-+
-+int __init
-+ar2315_init_devices(void)
-+{
-+ if (!is_2315())
-+ return 0;
-+
-+ /* Find board configuration */
-+ ar231x_find_config(ar2315_flash_limit());
-+ ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
-+
-+ ar2315_init_gpio();
-+ platform_device_register(&ar2315_wdt);
-+ platform_device_register(&ar2315_spiflash);
-+ ar231x_add_ethernet(0, AR2315_ENET0, AR2315_IRQ_ENET0_INTRS,
-+ &ar2315_eth_data);
-+ ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
-+
-+ return 0;
-+}
-+
-+static void
-+ar2315_restart(char *command)
-+{
-+ void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
-+
-+ local_irq_disable();
-+
-+ /* try reset the system via reset control */
-+ ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM);
-+
-+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
-+ * give it some time to attempt a gpio based hardware reset
-+ * (atheros reference design workaround) */
-+ gpio_direction_output(AR2315_RESET_GPIO, 0);
-+ mdelay(100);
-+
-+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
-+ * workaround. Attempt to jump to the mips reset location -
-+ * the boot loader itself might be able to recover the system */
-+ mips_reset_vec();
-+}
-+
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
-+static int __initdata PLLC_DIVIDE_TABLE[5] = { 2, 3, 4, 6, 3 };
-+
-+static unsigned int __init
-+ar2315_sys_clk(unsigned int clockCtl)
-+{
-+ unsigned int pllcCtrl,cpuDiv;
-+ unsigned int pllcOut,refdiv,fdiv,divby2;
-+ unsigned int clkDiv;
-+
-+ pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL);
-+ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
-+ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
-+ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
-+ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
-+ divby2 += 1;
-+ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
-+
-+
-+ /* clkm input selected */
-+ switch(clockCtl & CPUCLK_CLK_SEL_M) {
-+ case 0:
-+ case 1:
-+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
-+ break;
-+ case 2:
-+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
-+ break;
-+ default:
-+ pllcOut = 40000000;
-+ clkDiv = 1;
-+ break;
-+ }
-+ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
-+ cpuDiv = cpuDiv * 2 ?: 1;
-+ return (pllcOut/(clkDiv * cpuDiv));
-+}
-+
-+static inline unsigned int
-+ar2315_cpu_frequency(void)
-+{
-+ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK));
-+}
-+
-+static inline unsigned int
-+ar2315_apb_frequency(void)
-+{
-+ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK));
-+}
-+
-+void __init
-+ar2315_time_init(void)
-+{
-+ if (!is_2315())
-+ return;
-+
-+ mips_hpt_frequency = ar2315_cpu_frequency() / 2;
-+}
-+
-+void __init
-+ar2315_prom_init(void)
-+{
-+ u32 memsize, memcfg, devid;
-+
-+ if (!is_2315())
-+ return;
-+
-+ memcfg = ar231x_read_reg(AR2315_MEM_CFG);
-+ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
-+ memsize <<= 3;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ /* Detect the hardware based on the device ID */
-+ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP;
-+ switch(devid) {
-+ case 0x90:
-+ case 0x91:
-+ ar231x_devtype = DEV_TYPE_AR2317;
-+ break;
-+ default:
-+ ar231x_devtype = DEV_TYPE_AR2315;
-+ break;
-+ }
-+ ar231x_gpiodev = &ar2315_gpiodev;
-+ ar231x_board.devid = devid;
-+}
-+
-+void __init
-+ar2315_plat_setup(void)
-+{
-+ u32 config;
-+
-+ if (!is_2315())
-+ return;
-+
-+ /* Clear any lingering AHB errors */
-+ config = read_c0_config();
-+ write_c0_config(config & ~0x3);
-+ ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET);
-+ ar231x_read_reg(AR2315_AHB_ERR1);
-+ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
-+
-+ _machine_restart = ar2315_restart;
-+ ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency());
-+}
---- /dev/null
-+++ b/arch/mips/ar231x/ar2315.h
-@@ -0,0 +1,37 @@
-+#ifndef __AR2315_H
-+#define __AR2315_H
-+
-+#ifdef CONFIG_ATHEROS_AR2315
-+
-+extern void ar2315_irq_init(void);
-+extern int ar2315_init_devices(void);
-+extern void ar2315_prom_init(void);
-+extern void ar2315_plat_setup(void);
-+extern void ar2315_time_init(void);
-+
-+#else
-+
-+static inline void ar2315_irq_init(void)
-+{
-+}
-+
-+static inline int ar2315_init_devices(void)
-+{
-+ return 0;
-+}
-+
-+static inline void ar2315_prom_init(void)
-+{
-+}
-+
-+static inline void ar2315_plat_setup(void)
-+{
-+}
-+
-+static inline void ar2315_time_init(void)
-+{
-+}
-+
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/ar5312.h
-@@ -0,0 +1,38 @@
-+#ifndef __AR5312_H
-+#define __AR5312_H
-+
-+#ifdef CONFIG_ATHEROS_AR5312
-+
-+extern void ar5312_irq_init(void);
-+extern int ar5312_init_devices(void);
-+extern void ar5312_prom_init(void);
-+extern void ar5312_plat_setup(void);
-+extern void ar5312_time_init(void);
-+extern void ar5312_time_init(void);
-+
-+#else
-+
-+static inline void ar5312_irq_init(void)
-+{
-+}
-+
-+static inline int ar5312_init_devices(void)
-+{
-+ return 0;
-+}
-+
-+static inline void ar5312_prom_init(void)
-+{
-+}
-+
-+static inline void ar5312_plat_setup(void)
-+{
-+}
-+
-+static inline void ar5312_time_init(void)
-+{
-+}
-+
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar231x.h
-@@ -0,0 +1,54 @@
-+#ifndef __AR531X_H
-+#define __AR531X_H
-+
-+#define AR531X_MISC_IRQ_BASE 0x20
-+#define AR531X_GPIO_IRQ_BASE 0x30
-+
-+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
-+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
-+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-+
-+/* Miscellaneous interrupts, which share IP6 */
-+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
-+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
-+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
-+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
-+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
-+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
-+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
-+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
-+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
-+#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9
-+#define AR531X_MISC_IRQ_COUNT 10
-+
-+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
-+#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0
-+#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n
-+#define AR531X_GPIO_IRQ_COUNT 22
-+
-+static inline u32
-+ar231x_read_reg(u32 reg)
-+{
-+ return __raw_readl((u32 *) KSEG1ADDR(reg));
-+}
-+
-+static inline void
-+ar231x_write_reg(u32 reg, u32 val)
-+{
-+ __raw_writel(val, (u32 *) KSEG1ADDR(reg));
-+}
-+
-+static inline u32
-+ar231x_mask_reg(u32 reg, u32 mask, u32 val)
-+{
-+ u32 ret;
-+
-+ ret = ar231x_read_reg(reg);
-+ ret &= ~mask;
-+ ret |= val;
-+ ar231x_write_reg(reg, ret);
-+
-+ return ret;
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/devices.h
-@@ -0,0 +1,37 @@
-+#ifndef __AR231X_DEVICES_H
-+#define __AR231X_DEVICES_H
-+
-+enum {
-+ /* handled by ar5312.c */
-+ DEV_TYPE_AR2312,
-+ DEV_TYPE_AR2313,
-+ DEV_TYPE_AR5312,
-+
-+ /* handled by ar2315.c */
-+ DEV_TYPE_AR2315,
-+ DEV_TYPE_AR2316,
-+ DEV_TYPE_AR2317,
-+
-+ DEV_TYPE_UNKNOWN
-+};
-+
-+extern int ar231x_devtype;
-+extern struct ar231x_board_config ar231x_board;
-+extern asmlinkage void (*ar231x_irq_dispatch)(void);
-+
-+extern int ar231x_find_config(u8 *flash_limit);
-+extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk);
-+extern int ar231x_add_wmac(int nr, u32 base, int irq);
-+extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata);
-+
-+static inline bool is_2315(void)
-+{
-+ return (current_cpu_data.cputype == CPU_4KEC);
-+}
-+
-+static inline bool is_5312(void)
-+{
-+ return !is_2315();
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/devices.c
-@@ -0,0 +1,175 @@
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial_8250.h>
-+#include <linux/platform_device.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+struct ar231x_board_config ar231x_board;
-+int ar231x_devtype = DEV_TYPE_UNKNOWN;
-+const struct ar231x_gpiodev *ar231x_gpiodev;
-+EXPORT_SYMBOL(ar231x_gpiodev);
-+
-+static struct resource ar231x_eth0_res[] = {
-+ {
-+ .name = "eth0_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth0_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct resource ar231x_eth1_res[] = {
-+ {
-+ .name = "eth1_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth1_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device ar231x_eth[] = {
-+ {
-+ .id = 0,
-+ .name = "ar231x-eth",
-+ .resource = ar231x_eth0_res,
-+ .num_resources = ARRAY_SIZE(ar231x_eth0_res)
-+ },
-+ {
-+ .id = 1,
-+ .name = "ar231x-eth",
-+ .resource = ar231x_eth1_res,
-+ .num_resources = ARRAY_SIZE(ar231x_eth1_res)
-+ }
-+};
-+
-+static struct resource ar231x_wmac0_res[] = {
-+ {
-+ .name = "wmac0_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "wmac0_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct resource ar231x_wmac1_res[] = {
-+ {
-+ .name = "wmac1_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "wmac1_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+
-+static struct platform_device ar231x_wmac[] = {
-+ {
-+ .id = 0,
-+ .name = "ar231x-wmac",
-+ .resource = ar231x_wmac0_res,
-+ .num_resources = ARRAY_SIZE(ar231x_wmac0_res),
-+ .dev.platform_data = &ar231x_board,
-+ },
-+ {
-+ .id = 1,
-+ .name = "ar231x-wmac",
-+ .resource = ar231x_wmac1_res,
-+ .num_resources = ARRAY_SIZE(ar231x_wmac1_res),
-+ .dev.platform_data = &ar231x_board,
-+ },
-+};
-+
-+static const char *devtype_strings[] = {
-+ [DEV_TYPE_AR5312] = "Atheros AR5312",
-+ [DEV_TYPE_AR2312] = "Atheros AR2312",
-+ [DEV_TYPE_AR2313] = "Atheros AR2313",
-+ [DEV_TYPE_AR2315] = "Atheros AR2315",
-+ [DEV_TYPE_AR2316] = "Atheros AR2316",
-+ [DEV_TYPE_AR2317] = "Atheros AR2317",
-+ [DEV_TYPE_UNKNOWN] = "Atheros (unknown)",
-+};
-+
-+const char *get_system_type(void)
-+{
-+ if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) ||
-+ !devtype_strings[ar231x_devtype])
-+ return devtype_strings[DEV_TYPE_UNKNOWN];
-+ return devtype_strings[ar231x_devtype];
-+}
-+
-+
-+int __init
-+ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata)
-+{
-+ struct resource *res;
-+
-+ ar231x_eth[nr].dev.platform_data = pdata;
-+ res = &ar231x_eth[nr].resource[0];
-+ res->start = base;
-+ res->end = base + 0x2000 - 1;
-+ res++;
-+ res->start = irq;
-+ res->end = irq;
-+ return platform_device_register(&ar231x_eth[nr]);
-+}
-+
-+void __init
-+ar231x_serial_setup(u32 mapbase, unsigned int uartclk)
-+{
-+ struct uart_port s;
-+
-+ memset(&s, 0, sizeof(s));
-+
-+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-+ s.iotype = UPIO_MEM;
-+ s.irq = AR531X_MISC_IRQ_UART0;
-+ s.regshift = 2;
-+ s.mapbase = mapbase;
-+ s.uartclk = uartclk;
-+ s.membase = (void __iomem *)s.mapbase;
-+
-+ early_serial_setup(&s);
-+}
-+
-+int __init
-+ar231x_add_wmac(int nr, u32 base, int irq)
-+{
-+ struct resource *res;
-+
-+ ar231x_wmac[nr].dev.platform_data = &ar231x_board;
-+ res = &ar231x_wmac[nr].resource[0];
-+ res->start = base;
-+ res->end = base + 0x10000 - 1;
-+ res++;
-+ res->start = irq;
-+ res->end = irq;
-+ return platform_device_register(&ar231x_wmac[nr]);
-+}
-+
-+static int __init ar231x_register_devices(void)
-+{
-+ static struct resource res = {
-+ .start = 0xFFFFFFFF,
-+ };
-+
-+ platform_device_register_simple("GPIODEV", 0, &res, 1);
-+ ar5312_init_devices();
-+ ar2315_init_devices();
-+
-+ return 0;
-+}
-+
-+device_initcall(ar231x_register_devices);
diff --git a/target/linux/atheros/patches-2.6.35/101-early-printk-support.patch b/target/linux/atheros/patches-2.6.35/101-early-printk-support.patch
deleted file mode 100644
index 8feec4c678..0000000000
--- a/target/linux/atheros/patches-2.6.35/101-early-printk-support.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- /dev/null
-+++ b/arch/mips/ar231x/early_printk.c
-@@ -0,0 +1,44 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ */
-+
-+#include <linux/mm.h>
-+#include <linux/io.h>
-+#include <linux/serial_reg.h>
-+#include <asm/addrspace.h>
-+
-+#include <asm/mach-ar231x/ar2315_regs.h>
-+#include <asm/mach-ar231x/ar5312_regs.h>
-+#include "devices.h"
-+
-+static inline void prom_uart_wr(void __iomem *base, unsigned reg,
-+ unsigned char ch)
-+{
-+ __raw_writeb(ch, base + 4 * reg);
-+}
-+
-+static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg)
-+{
-+ return __raw_readb(base + 4 * reg);
-+}
-+
-+void prom_putchar(unsigned char ch)
-+{
-+ static void __iomem *base;
-+
-+ if (unlikely(base == NULL)) {
-+ if (is_2315())
-+ base = (void __iomem *)(KSEG1ADDR(AR2315_UART0));
-+ else
-+ base = (void __iomem *)(KSEG1ADDR(AR531X_UART0));
-+ }
-+
-+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
-+ prom_uart_wr(base, UART_TX, ch);
-+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
-+}
-+
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -9,5 +9,8 @@
- #
-
- obj-y += board.o prom.o devices.o
-+
-+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-+
- obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
- obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -94,6 +94,7 @@ config ATHEROS_AR231X
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_32BIT_KERNEL
- select GENERIC_GPIO
-+ select SYS_HAS_EARLY_PRINTK
- help
- Support for AR231x and AR531x based boards
-
diff --git a/target/linux/atheros/patches-2.6.35/105-ar2315_pci.patch b/target/linux/atheros/patches-2.6.35/105-ar2315_pci.patch
deleted file mode 100644
index 3f5e6b4528..0000000000
--- a/target/linux/atheros/patches-2.6.35/105-ar2315_pci.patch
+++ /dev/null
@@ -1,297 +0,0 @@
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -14,3 +14,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin
-
- obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
- obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
-+obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o
---- /dev/null
-+++ b/arch/mips/ar231x/pci.c
-@@ -0,0 +1,230 @@
-+/*
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/spinlock.h>
-+#include <linux/delay.h>
-+#include <linux/irq.h>
-+#include <asm/bootinfo.h>
-+#include <asm/paccess.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/io.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include <ar2315_regs.h>
-+#include "devices.h"
-+
-+#define AR531X_MEM_BASE 0x80800000UL
-+#define AR531X_MEM_SIZE 0x00ffffffUL
-+#define AR531X_IO_SIZE 0x00007fffUL
-+
-+static unsigned long configspace;
-+
-+static int config_access(int devfn, int where, int size, u32 *ptr, bool write)
-+{
-+ unsigned long flags;
-+ int func = PCI_FUNC(devfn);
-+ int dev = PCI_SLOT(devfn);
-+ u32 value = 0;
-+ int err = 0;
-+ u32 addr;
-+
-+ if (((dev != 0) && (dev != 3)) || (func > 2))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ /* Select Configuration access */
-+ local_irq_save(flags);
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, 0, AR2315_PCIMISC_CFG_SEL);
-+ mb();
-+
-+ addr = (u32) configspace + (1 << (13 + dev)) + (func << 8) + where;
-+ if (size == 1)
-+ addr ^= 0x3;
-+ else if (size == 2)
-+ addr ^= 0x2;
-+
-+ if (write) {
-+ value = *ptr;
-+ if (size == 1)
-+ err = put_dbe(value, (u8 *) addr);
-+ else if (size == 2)
-+ err = put_dbe(value, (u16 *) addr);
-+ else if (size == 4)
-+ err = put_dbe(value, (u32 *) addr);
-+ } else {
-+ if (size == 1)
-+ err = get_dbe(value, (u8 *) addr);
-+ else if (size == 2)
-+ err = get_dbe(value, (u16 *) addr);
-+ else if (size == 4)
-+ err = get_dbe(value, (u32 *) addr);
-+ if (err)
-+ *ptr = 0xffffffff;
-+ else
-+ *ptr = value;
-+ }
-+
-+ /* Select Memory access */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_CFG_SEL, 0);
-+ local_irq_restore(flags);
-+
-+ return (err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL);
-+}
-+
-+static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
-+{
-+ return config_access(devfn, where, size, value, 0);
-+}
-+
-+static int ar231x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-+{
-+ return config_access(devfn, where, size, &value, 1);
-+}
-+
-+struct pci_ops ar231x_pci_ops = {
-+ .read = ar231x_pci_read,
-+ .write = ar231x_pci_write,
-+};
-+
-+static struct resource ar231x_mem_resource = {
-+ .name = "AR531x PCI MEM",
-+ .start = AR531X_MEM_BASE,
-+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource ar231x_io_resource = {
-+ .name = "AR531x PCI I/O",
-+ .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
-+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+struct pci_controller ar231x_pci_controller = {
-+ .pci_ops = &ar231x_pci_ops,
-+ .mem_resource = &ar231x_mem_resource,
-+ .io_resource = &ar231x_io_resource,
-+ .mem_offset = 0x00000000UL,
-+ .io_offset = 0x00000000UL,
-+};
-+
-+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return AR2315_IRQ_LCBUS_PCI;
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
-+ pci_write_config_word(dev, 0x40, 0);
-+
-+ /* Clear any pending Abort or external Interrupts
-+ * and enable interrupt processing */
-+ ar231x_mask_reg(AR2315_PCI_INTEN_REG, AR2315_PCI_INT_ENABLE, 0);
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
-+ ar231x_write_reg(AR2315_PCI_INT_MASK, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
-+ ar231x_mask_reg(AR2315_PCI_INTEN_REG, 0, AR2315_PCI_INT_ENABLE);
-+
-+ return 0;
-+}
-+
-+static void
-+ar2315_pci_fixup(struct pci_dev *dev)
-+{
-+ unsigned int devfn = dev->devfn;
-+
-+ if (dev->bus->number != 0)
-+ return;
-+
-+ /* Only fix up the PCI host settings */
-+ if ((PCI_SLOT(devfn) != 3) || (PCI_FUNC(devfn) != 0))
-+ return;
-+
-+ /* Fix up MBARs */
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, HOST_PCI_MBAR0);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, HOST_PCI_MBAR1);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, HOST_PCI_MBAR2);
-+ pci_write_config_dword(dev, PCI_COMMAND,
-+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL |
-+ PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR |
-+ PCI_COMMAND_FAST_BACK);
-+}
-+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar2315_pci_fixup);
-+
-+static int __init
-+ar2315_pci_init(void)
-+{
-+ u32 reg;
-+
-+ if (ar231x_devtype != DEV_TYPE_AR2315)
-+ return -ENODEV;
-+
-+ configspace = (unsigned long) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
-+ ar231x_pci_controller.io_map_base =
-+ (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE);
-+ set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space */
-+
-+ reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
-+ msleep(10);
-+
-+ reg &= ~AR2315_RESET_PCIDMA;
-+ ar231x_write_reg(AR2315_RESET, reg);
-+ msleep(10);
-+
-+ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0,
-+ AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE);
-+
-+ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
-+ (AR2315_PCICLK_IN_FREQ_DIV_6 << AR2315_PCICLK_DIV_S));
-+ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
-+ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | AR2315_IF_MASK,
-+ AR2315_IF_PCI | AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
-+ (AR2315_IF_PCI_CLK_OUTPUT_CLK << AR2315_IF_PCI_CLK_SHIFT));
-+
-+ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
-+ AR2315_PCIRST_LOW);
-+ msleep(100);
-+
-+ /* Bring the PCI out of reset */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
-+ AR2315_PCIRST_HIGH | AR2315_PCICACHE_DIS | 0x8);
-+
-+ ar231x_write_reg(AR2315_PCI_UNCACHE_CFG,
-+ 0x1E | /* 1GB uncached */
-+ (1 << 5) | /* Enable uncached */
-+ (0x2 << 30) /* Base: 0x80000000 */
-+ );
-+ ar231x_read_reg(AR2315_PCI_UNCACHE_CFG);
-+
-+ msleep(500);
-+
-+ /* dirty hack - anyone with a datasheet that knows the memory map ? */
-+ ioport_resource.start = 0x10000000;
-+ ioport_resource.end = 0xffffffff;
-+ iomem_resource.start = 0x10000000;
-+ iomem_resource.end = 0xffffffff;
-+
-+ register_pci_controller(&ar231x_pci_controller);
-+
-+ return 0;
-+}
-+
-+arch_initcall(ar2315_pci_init);
---- a/arch/mips/ar231x/Kconfig
-+++ b/arch/mips/ar231x/Kconfig
-@@ -15,3 +15,13 @@ config ATHEROS_AR2315
- select SYS_SUPPORTS_BIG_ENDIAN
- select GENERIC_GPIO
- default y
-+
-+config ATHEROS_AR2315_PCI
-+ bool "PCI support"
-+ depends on ATHEROS_AR2315
-+ select HW_HAS_PCI
-+ select PCI
-+ select USB_ARCH_HAS_HCD
-+ select USB_ARCH_HAS_OHCI
-+ select USB_ARCH_HAS_EHCI
-+ default y
---- a/arch/mips/ar231x/ar2315.c
-+++ b/arch/mips/ar231x/ar2315.c
-@@ -63,6 +63,27 @@ static inline void ar2315_gpio_irq(void)
- do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
- }
-
-+#ifdef CONFIG_ATHEROS_AR2315_PCI
-+static inline void pci_abort_irq(void)
-+{
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_ABORT_INT);
-+}
-+
-+static inline void pci_ack_irq(void)
-+{
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_EXT_INT);
-+}
-+
-+void ar2315_pci_irq(int irq)
-+{
-+ if (ar231x_read_reg(AR2315_PCI_INT_STATUS) == AR2315_PCI_ABORT_INT)
-+ pci_abort_irq();
-+ else {
-+ do_IRQ(irq);
-+ pci_ack_irq();
-+ }
-+}
-+#endif /* CONFIG_ATHEROS_AR2315_PCI */
-
- /*
- * Called when an interrupt is received, this function
-@@ -81,6 +102,10 @@ ar2315_irq_dispatch(void)
- do_IRQ(AR2315_IRQ_WLAN0_INTRS);
- else if (pending & CAUSEF_IP4)
- do_IRQ(AR2315_IRQ_ENET0_INTRS);
-+#ifdef CONFIG_ATHEROS_AR2315_PCI
-+ else if (pending & CAUSEF_IP5)
-+ ar2315_pci_irq(AR2315_IRQ_LCBUS_PCI);
-+#endif
- else if (pending & CAUSEF_IP2) {
- unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
-
diff --git a/target/linux/atheros/patches-2.6.35/110-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.35/110-ar2313_ethernet.patch
deleted file mode 100644
index ddd3eb1d39..0000000000
--- a/target/linux/atheros/patches-2.6.35/110-ar2313_ethernet.patch
+++ /dev/null
@@ -1,1611 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -371,6 +371,12 @@ config AX88796_93CX6
- help
- Select this if your platform comes with an external 93CX6 eeprom.
-
-+config AR231X_ETHERNET
-+ tristate "AR231x Ethernet support"
-+ depends on ATHEROS_AR231X
-+ help
-+ Support for the AR231x/531x ethernet controller
-+
- config MACE
- tristate "MACE (Power Mac ethernet) support"
- depends on PPC_PMAC && PPC32
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -221,6 +221,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
- obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
-+obj-$(CONFIG_AR231X_ETHERNET) += ar231x.o
- obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
- obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
- obj-$(CONFIG_DECLANCE) += declance.o
---- /dev/null
-+++ b/drivers/net/ar231x.c
-@@ -0,0 +1,1278 @@
-+/*
-+ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Additional credits:
-+ * This code is taken from John Taylor's Sibyte driver and then
-+ * modified for the AR2313.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+#include <linux/sockios.h>
-+#include <linux/pkt_sched.h>
-+#include <linux/mii.h>
-+#include <linux/phy.h>
-+#include <linux/ethtool.h>
-+#include <linux/ctype.h>
-+#include <linux/platform_device.h>
-+
-+#include <net/sock.h>
-+#include <net/ip.h>
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/byteorder.h>
-+#include <asm/uaccess.h>
-+#include <asm/bootinfo.h>
-+
-+#define AR2313_MTU 1692
-+#define AR2313_PRIOS 1
-+#define AR2313_QUEUES (2*AR2313_PRIOS)
-+#define AR2313_DESCR_ENTRIES 64
-+
-+
-+#ifndef min
-+#define min(a,b) (((a)<(b))?(a):(b))
-+#endif
-+
-+#ifndef SMP_CACHE_BYTES
-+#define SMP_CACHE_BYTES L1_CACHE_BYTES
-+#endif
-+
-+#define AR2313_MBOX_SET_BIT 0x8
-+
-+#include "ar231x.h"
-+
-+/*
-+ * New interrupt handler strategy:
-+ *
-+ * An old interrupt handler worked using the traditional method of
-+ * replacing an skbuff with a new one when a packet arrives. However
-+ * the rx rings do not need to contain a static number of buffer
-+ * descriptors, thus it makes sense to move the memory allocation out
-+ * of the main interrupt handler and do it in a bottom half handler
-+ * and only allocate new buffers when the number of buffers in the
-+ * ring is below a certain threshold. In order to avoid starving the
-+ * NIC under heavy load it is however necessary to force allocation
-+ * when hitting a minimum threshold. The strategy for alloction is as
-+ * follows:
-+ *
-+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
-+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
-+ * the buffers in the interrupt handler
-+ * RX_RING_THRES - maximum number of buffers in the rx ring
-+ *
-+ * One advantagous side effect of this allocation approach is that the
-+ * entire rx processing can be done without holding any spin lock
-+ * since the rx rings and registers are totally independent of the tx
-+ * ring and its registers. This of course includes the kmalloc's of
-+ * new skb's. Thus start_xmit can run in parallel with rx processing
-+ * and the memory allocation on SMP systems.
-+ *
-+ * Note that running the skb reallocation in a bottom half opens up
-+ * another can of races which needs to be handled properly. In
-+ * particular it can happen that the interrupt handler tries to run
-+ * the reallocation while the bottom half is either running on another
-+ * CPU or was interrupted on the same CPU. To get around this the
-+ * driver uses bitops to prevent the reallocation routines from being
-+ * reentered.
-+ *
-+ * TX handling can also be done without holding any spin lock, wheee
-+ * this is fun! since tx_csm is only written to by the interrupt
-+ * handler.
-+ */
-+
-+/*
-+ * Threshold values for RX buffer allocation - the low water marks for
-+ * when to start refilling the rings are set to 75% of the ring
-+ * sizes. It seems to make sense to refill the rings entirely from the
-+ * intrrupt handler once it gets below the panic threshold, that way
-+ * we don't risk that the refilling is moved to another CPU when the
-+ * one running the interrupt handler just got the slab code hot in its
-+ * cache.
-+ */
-+#define RX_RING_SIZE AR2313_DESCR_ENTRIES
-+#define RX_PANIC_THRES (RX_RING_SIZE/4)
-+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
-+#define CRC_LEN 4
-+#define RX_OFFSET 2
-+
-+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-+#define VLAN_HDR 4
-+#else
-+#define VLAN_HDR 0
-+#endif
-+
-+#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
-+
-+#ifdef MODULE
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
-+MODULE_DESCRIPTION("AR231x Ethernet driver");
-+#endif
-+
-+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-+
-+// prototypes
-+static void ar231x_halt(struct net_device *dev);
-+static void rx_tasklet_func(unsigned long data);
-+static void rx_tasklet_cleanup(struct net_device *dev);
-+static void ar231x_multicast_list(struct net_device *dev);
-+static void ar231x_tx_timeout(struct net_device *dev);
-+
-+static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
-+static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
-+static int ar231x_mdiobus_reset(struct mii_bus *bus);
-+static int ar231x_mdiobus_probe (struct net_device *dev);
-+static void ar231x_adjust_link(struct net_device *dev);
-+
-+#ifndef ERR
-+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-+#endif
-+
-+static const struct net_device_ops ar231x_ops = {
-+ .ndo_open = ar231x_open,
-+ .ndo_stop = ar231x_close,
-+ .ndo_start_xmit = ar231x_start_xmit,
-+ .ndo_set_multicast_list = ar231x_multicast_list,
-+ .ndo_do_ioctl = ar231x_ioctl,
-+ .ndo_change_mtu = eth_change_mtu,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_set_mac_address = eth_mac_addr,
-+ .ndo_tx_timeout = ar231x_tx_timeout,
-+};
-+
-+int __init ar231x_probe(struct platform_device *pdev)
-+{
-+ struct net_device *dev;
-+ struct ar231x_private *sp;
-+ struct resource *res;
-+ unsigned long ar_eth_base;
-+ char buf[64];
-+
-+ dev = alloc_etherdev(sizeof(struct ar231x_private));
-+
-+ if (dev == NULL) {
-+ printk(KERN_ERR
-+ "ar231x: Unable to allocate net_device structure!\n");
-+ return -ENOMEM;
-+ }
-+
-+ platform_set_drvdata(pdev, dev);
-+
-+ sp = netdev_priv(dev);
-+ sp->dev = dev;
-+ sp->cfg = pdev->dev.platform_data;
-+
-+ sprintf(buf, "eth%d_membase", pdev->id);
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
-+ if (!res)
-+ return -ENODEV;
-+
-+ sp->link = 0;
-+ ar_eth_base = res->start;
-+
-+ sprintf(buf, "eth%d_irq", pdev->id);
-+ dev->irq = platform_get_irq_byname(pdev, buf);
-+
-+ spin_lock_init(&sp->lock);
-+
-+ dev->features |= NETIF_F_HIGHDMA;
-+ dev->netdev_ops = &ar231x_ops;
-+
-+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ sp->eth_regs =
-+ ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
-+ if (!sp->eth_regs) {
-+ printk("Can't remap eth registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ /*
-+ * When there's only one MAC, PHY regs are typically on ENET0,
-+ * even though the MAC might be on ENET1.
-+ * Needto remap PHY regs separately in this case
-+ */
-+ if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
-+ sp->phy_regs = sp->eth_regs;
-+ else {
-+ sp->phy_regs =
-+ ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
-+ sizeof(*sp->phy_regs));
-+ if (!sp->phy_regs) {
-+ printk("Can't remap phy registers\n");
-+ return (-ENXIO);
-+ }
-+ }
-+
-+ sp->dma_regs =
-+ ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
-+ sizeof(*sp->dma_regs));
-+ dev->base_addr = (unsigned int) sp->dma_regs;
-+ if (!sp->dma_regs) {
-+ printk("Can't remap DMA registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
-+ if (!sp->int_regs) {
-+ printk("Can't remap INTERRUPT registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
-+ sp->name[sizeof(sp->name) - 1] = '\0';
-+ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
-+
-+ if (ar231x_init(dev)) {
-+ /*
-+ * ar231x_init() calls ar231x_init_cleanup() on error.
-+ */
-+ kfree(dev);
-+ return -ENODEV;
-+ }
-+
-+ if (register_netdev(dev)) {
-+ printk("%s: register_netdev failed\n", __func__);
-+ return -1;
-+ }
-+
-+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
-+ dev->name, sp->name,
-+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
-+
-+ sp->mii_bus = mdiobus_alloc();
-+ if (sp->mii_bus == NULL)
-+ return -1;
-+
-+ sp->mii_bus->priv = dev;
-+ sp->mii_bus->read = ar231x_mdiobus_read;
-+ sp->mii_bus->write = ar231x_mdiobus_write;
-+ sp->mii_bus->reset = ar231x_mdiobus_reset;
-+ sp->mii_bus->name = "ar231x_eth_mii";
-+ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
-+ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
-+ *sp->mii_bus->irq = PHY_POLL;
-+
-+ mdiobus_register(sp->mii_bus);
-+
-+ if (ar231x_mdiobus_probe(dev) != 0) {
-+ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
-+ rx_tasklet_cleanup(dev);
-+ ar231x_init_cleanup(dev);
-+ unregister_netdev(dev);
-+ kfree(dev);
-+ return -ENODEV;
-+ }
-+
-+ /* start link poll timer */
-+ ar231x_setup_timer(dev);
-+
-+ return 0;
-+}
-+
-+
-+static void ar231x_multicast_list(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int filter;
-+
-+ filter = sp->eth_regs->mac_control;
-+
-+ if (dev->flags & IFF_PROMISC)
-+ filter |= MAC_CONTROL_PR;
-+ else
-+ filter &= ~MAC_CONTROL_PR;
-+ if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 0))
-+ filter |= MAC_CONTROL_PM;
-+ else
-+ filter &= ~MAC_CONTROL_PM;
-+
-+ sp->eth_regs->mac_control = filter;
-+}
-+
-+static void rx_tasklet_cleanup(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ /*
-+ * Tasklet may be scheduled. Need to get it removed from the list
-+ * since we're about to free the struct.
-+ */
-+
-+ sp->unloading = 1;
-+ tasklet_enable(&sp->rx_tasklet);
-+ tasklet_kill(&sp->rx_tasklet);
-+}
-+
-+static int __devexit ar231x_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ rx_tasklet_cleanup(dev);
-+ ar231x_init_cleanup(dev);
-+ unregister_netdev(dev);
-+ mdiobus_unregister(sp->mii_bus);
-+ mdiobus_free(sp->mii_bus);
-+ kfree(dev);
-+ return 0;
-+}
-+
-+
-+/*
-+ * Restart the AR2313 ethernet controller.
-+ */
-+static int ar231x_restart(struct net_device *dev)
-+{
-+ /* disable interrupts */
-+ disable_irq(dev->irq);
-+
-+ /* stop mac */
-+ ar231x_halt(dev);
-+
-+ /* initialize */
-+ ar231x_init(dev);
-+
-+ /* enable interrupts */
-+ enable_irq(dev->irq);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ar231x_driver = {
-+ .driver.name = "ar231x-eth",
-+ .probe = ar231x_probe,
-+ .remove = __devexit_p(ar231x_remove),
-+};
-+
-+int __init ar231x_module_init(void)
-+{
-+ return platform_driver_register(&ar231x_driver);
-+}
-+
-+void __exit ar231x_module_cleanup(void)
-+{
-+ platform_driver_unregister(&ar231x_driver);
-+}
-+
-+module_init(ar231x_module_init);
-+module_exit(ar231x_module_cleanup);
-+
-+
-+static void ar231x_free_descriptors(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ if (sp->rx_ring != NULL) {
-+ kfree((void *) KSEG0ADDR(sp->rx_ring));
-+ sp->rx_ring = NULL;
-+ sp->tx_ring = NULL;
-+ }
-+}
-+
-+
-+static int ar231x_allocate_descriptors(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int size;
-+ int j;
-+ ar231x_descr_t *space;
-+
-+ if (sp->rx_ring != NULL) {
-+ printk("%s: already done.\n", __FUNCTION__);
-+ return 0;
-+ }
-+
-+ size =
-+ (sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
-+ space = kmalloc(size, GFP_KERNEL);
-+ if (space == NULL)
-+ return 1;
-+
-+ /* invalidate caches */
-+ dma_cache_inv((unsigned int) space, size);
-+
-+ /* now convert pointer to KSEG1 */
-+ space = (ar231x_descr_t *) KSEG1ADDR(space);
-+
-+ memset((void *) space, 0, size);
-+
-+ sp->rx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ sp->tx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ /* Initialize the transmit Descriptors */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ ar231x_descr_t *td = &sp->tx_ring[j];
-+ td->status = 0;
-+ td->devcs = DMA_TX1_CHAINED;
-+ td->addr = 0;
-+ td->descr =
-+ virt_to_phys(&sp->
-+ tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * Generic cleanup handling data allocated during init. Used when the
-+ * module is unloaded or if an error occurs during initialization
-+ */
-+static void ar231x_init_cleanup(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ struct sk_buff *skb;
-+ int j;
-+
-+ ar231x_free_descriptors(dev);
-+
-+ if (sp->eth_regs)
-+ iounmap((void *) sp->eth_regs);
-+ if (sp->dma_regs)
-+ iounmap((void *) sp->dma_regs);
-+
-+ if (sp->rx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->rx_skb[j];
-+ if (skb) {
-+ sp->rx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->rx_skb);
-+ sp->rx_skb = NULL;
-+ }
-+
-+ if (sp->tx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ sp->tx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->tx_skb);
-+ sp->tx_skb = NULL;
-+ }
-+}
-+
-+static int ar231x_setup_timer(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ init_timer(&sp->link_timer);
-+
-+ sp->link_timer.function = ar231x_link_timer_fn;
-+ sp->link_timer.data = (int) dev;
-+ sp->link_timer.expires = jiffies + HZ;
-+
-+ add_timer(&sp->link_timer);
-+ return 0;
-+
-+}
-+
-+static void ar231x_link_timer_fn(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ // see if the link status changed
-+ // This was needed to make sure we set the PHY to the
-+ // autonegotiated value of half or full duplex.
-+ ar231x_check_link(dev);
-+
-+ // Loop faster when we don't have link.
-+ // This was needed to speed up the AP bootstrap time.
-+ if (sp->link == 0) {
-+ mod_timer(&sp->link_timer, jiffies + HZ / 2);
-+ } else {
-+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
-+ }
-+}
-+
-+static void ar231x_check_link(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ u16 phyData;
-+
-+ phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
-+ if (sp->phyData != phyData) {
-+ if (phyData & BMSR_LSTATUS) {
-+ /* link is present, ready link partner ability to deterine
-+ duplexity */
-+ int duplex = 0;
-+ u16 reg;
-+
-+ sp->link = 1;
-+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
-+ if (reg & BMCR_ANENABLE) {
-+ /* auto neg enabled */
-+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
-+ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
-+ } else {
-+ /* no auto neg, just read duplex config */
-+ duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
-+ }
-+
-+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
-+ dev->name, (duplex) ? "full" : "half");
-+
-+ if (duplex) {
-+ /* full duplex */
-+ sp->eth_regs->mac_control =
-+ ((sp->eth_regs->
-+ mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
-+ } else {
-+ /* half duplex */
-+ sp->eth_regs->mac_control =
-+ ((sp->eth_regs->
-+ mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
-+ }
-+ } else {
-+ /* no link */
-+ sp->link = 0;
-+ }
-+ sp->phyData = phyData;
-+ }
-+}
-+
-+static int ar231x_reset_reg(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int ethsal, ethsah;
-+ unsigned int flags;
-+
-+ *sp->int_regs |= sp->cfg->reset_mac;
-+ mdelay(10);
-+ *sp->int_regs &= ~sp->cfg->reset_mac;
-+ mdelay(10);
-+ *sp->int_regs |= sp->cfg->reset_phy;
-+ mdelay(10);
-+ *sp->int_regs &= ~sp->cfg->reset_phy;
-+ mdelay(10);
-+
-+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
-+ mdelay(10);
-+ sp->dma_regs->bus_mode =
-+ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-+
-+ /* enable interrupts */
-+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
-+ DMA_STATUS_NIS |
-+ DMA_STATUS_RI |
-+ DMA_STATUS_TI | DMA_STATUS_FBE);
-+ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
-+ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
-+ sp->dma_regs->control =
-+ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-+
-+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
-+ sp->eth_regs->vlan_tag = (0x8100);
-+
-+ /* Enable Ethernet Interface */
-+ flags = (MAC_CONTROL_TE | /* transmit enable */
-+ MAC_CONTROL_PM | /* pass mcast */
-+ MAC_CONTROL_F | /* full duplex */
-+ MAC_CONTROL_HBD); /* heart beat disabled */
-+
-+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
-+ flags |= MAC_CONTROL_PR;
-+ }
-+ sp->eth_regs->mac_control = flags;
-+
-+ /* Set all Ethernet station address registers to their initial values */
-+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-+
-+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-+
-+ sp->eth_regs->mac_addr[0] = ethsah;
-+ sp->eth_regs->mac_addr[1] = ethsal;
-+
-+ mdelay(10);
-+
-+ return (0);
-+}
-+
-+
-+static int ar231x_init(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int ecode = 0;
-+
-+ /*
-+ * Allocate descriptors
-+ */
-+ if (ar231x_allocate_descriptors(dev)) {
-+ printk("%s: %s: ar231x_allocate_descriptors failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+
-+ /*
-+ * Get the memory for the skb rings.
-+ */
-+ if (sp->rx_skb == NULL) {
-+ sp->rx_skb =
-+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+ GFP_KERNEL);
-+ if (!(sp->rx_skb)) {
-+ printk("%s: %s: rx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ if (sp->tx_skb == NULL) {
-+ sp->tx_skb =
-+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+ GFP_KERNEL);
-+ if (!(sp->tx_skb)) {
-+ printk("%s: %s: tx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ /*
-+ * Set tx_csm before we start receiving interrupts, otherwise
-+ * the interrupt handler might think it is supposed to process
-+ * tx ints before we are up and running, which may cause a null
-+ * pointer access in the int handler.
-+ */
-+ sp->rx_skbprd = 0;
-+ sp->cur_rx = 0;
-+ sp->tx_prd = 0;
-+ sp->tx_csm = 0;
-+
-+ /*
-+ * Zero the stats before starting the interface
-+ */
-+ memset(&dev->stats, 0, sizeof(dev->stats));
-+
-+ /*
-+ * We load the ring here as there seem to be no way to tell the
-+ * firmware to wipe the ring without re-initializing it.
-+ */
-+ ar231x_load_rx_ring(dev, RX_RING_SIZE);
-+
-+ /*
-+ * Init hardware
-+ */
-+ ar231x_reset_reg(dev);
-+
-+ /*
-+ * Get the IRQ
-+ */
-+ ecode =
-+ request_irq(dev->irq, &ar231x_interrupt,
-+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-+ dev->name, dev);
-+ if (ecode) {
-+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
-+ dev->name, __FUNCTION__, dev->irq);
-+ goto init_error;
-+ }
-+
-+
-+ tasklet_enable(&sp->rx_tasklet);
-+
-+ return 0;
-+
-+ init_error:
-+ ar231x_init_cleanup(dev);
-+ return ecode;
-+}
-+
-+/*
-+ * Load the rx ring.
-+ *
-+ * Loading rings is safe without holding the spin lock since this is
-+ * done only before the device is enabled, thus no interrupts are
-+ * generated and by the interrupt handler/tasklet handler.
-+ */
-+static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
-+{
-+
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ short i, idx;
-+
-+ idx = sp->rx_skbprd;
-+
-+ for (i = 0; i < nr_bufs; i++) {
-+ struct sk_buff *skb;
-+ ar231x_descr_t *rd;
-+
-+ if (sp->rx_skb[idx])
-+ break;
-+
-+ skb = netdev_alloc_skb(dev, AR2313_BUFSIZE);
-+ if (!skb) {
-+ printk("\n\n\n\n %s: No memory in system\n\n\n\n",
-+ __FUNCTION__);
-+ break;
-+ }
-+
-+ /*
-+ * Make sure IP header starts on a fresh cache line.
-+ */
-+ skb->dev = dev;
-+ skb_reserve(skb, RX_OFFSET);
-+ sp->rx_skb[idx] = skb;
-+
-+ rd = (ar231x_descr_t *) & sp->rx_ring[idx];
-+
-+ /* initialize dma descriptor */
-+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rd->addr = virt_to_phys(skb->data);
-+ rd->descr =
-+ virt_to_phys(&sp->
-+ rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-+ rd->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ if (i)
-+ sp->rx_skbprd = idx;
-+
-+ return;
-+}
-+
-+#define AR2313_MAX_PKTS_PER_CALL 64
-+
-+static int ar231x_rx_int(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ struct sk_buff *skb, *skb_new;
-+ ar231x_descr_t *rxdesc;
-+ unsigned int status;
-+ u32 idx;
-+ int pkts = 0;
-+ int rval;
-+
-+ idx = sp->cur_rx;
-+
-+ /* process at most the entire ring and then wait for another interrupt
-+ */
-+ while (1) {
-+
-+ rxdesc = &sp->rx_ring[idx];
-+ status = rxdesc->status;
-+ if (status & DMA_RX_OWN) {
-+ /* SiByte owns descriptor or descr not yet filled in */
-+ rval = 0;
-+ break;
-+ }
-+
-+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
-+ rval = 1;
-+ break;
-+ }
-+
-+ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
-+ dev->stats.rx_errors++;
-+ dev->stats.rx_dropped++;
-+
-+ /* add statistics counters */
-+ if (status & DMA_RX_ERR_CRC)
-+ dev->stats.rx_crc_errors++;
-+ if (status & DMA_RX_ERR_COL)
-+ dev->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_LENGTH)
-+ dev->stats.rx_length_errors++;
-+ if (status & DMA_RX_ERR_RUNT)
-+ dev->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_DESC)
-+ dev->stats.rx_over_errors++;
-+
-+ } else {
-+ /* alloc new buffer. */
-+ skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
-+ if (skb_new != NULL) {
-+
-+ skb = sp->rx_skb[idx];
-+ /* set skb */
-+ skb_put(skb,
-+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
-+
-+ dev->stats.rx_bytes += skb->len;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ /* pass the packet to upper layers */
-+ netif_rx(skb);
-+
-+ skb_new->dev = dev;
-+ /* 16 bit align */
-+ skb_reserve(skb_new, RX_OFFSET);
-+ /* reset descriptor's curr_addr */
-+ rxdesc->addr = virt_to_phys(skb_new->data);
-+
-+ dev->stats.rx_packets++;
-+ sp->rx_skb[idx] = skb_new;
-+ } else {
-+ dev->stats.rx_dropped++;
-+ }
-+ }
-+
-+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rxdesc->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ sp->cur_rx = idx;
-+
-+ return rval;
-+}
-+
-+
-+static void ar231x_tx_int(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ u32 idx;
-+ struct sk_buff *skb;
-+ ar231x_descr_t *txdesc;
-+ unsigned int status = 0;
-+
-+ idx = sp->tx_csm;
-+
-+ while (idx != sp->tx_prd) {
-+ txdesc = &sp->tx_ring[idx];
-+
-+ if ((status = txdesc->status) & DMA_TX_OWN) {
-+ /* ar231x dma still owns descr */
-+ break;
-+ }
-+ /* done with this descriptor */
-+ dma_unmap_single(NULL, txdesc->addr,
-+ txdesc->devcs & DMA_TX1_BSIZE_MASK,
-+ DMA_TO_DEVICE);
-+ txdesc->status = 0;
-+
-+ if (status & DMA_TX_ERROR) {
-+ dev->stats.tx_errors++;
-+ dev->stats.tx_dropped++;
-+ if (status & DMA_TX_ERR_UNDER)
-+ dev->stats.tx_fifo_errors++;
-+ if (status & DMA_TX_ERR_HB)
-+ dev->stats.tx_heartbeat_errors++;
-+ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
-+ dev->stats.tx_carrier_errors++;
-+ if (status & (DMA_TX_ERR_LATE |
-+ DMA_TX_ERR_COL |
-+ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
-+ dev->stats.tx_aborted_errors++;
-+ } else {
-+ /* transmit OK */
-+ dev->stats.tx_packets++;
-+ }
-+
-+ skb = sp->tx_skb[idx];
-+ sp->tx_skb[idx] = NULL;
-+ idx = DSC_NEXT(idx);
-+ dev->stats.tx_bytes += skb->len;
-+ dev_kfree_skb_irq(skb);
-+ }
-+
-+ sp->tx_csm = idx;
-+
-+ return;
-+}
-+
-+
-+static void rx_tasklet_func(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ if (sp->unloading) {
-+ return;
-+ }
-+
-+ if (ar231x_rx_int(dev)) {
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+ } else {
-+ unsigned long flags;
-+ spin_lock_irqsave(&sp->lock, flags);
-+ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+ }
-+}
-+
-+static void rx_schedule(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-+
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+}
-+
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int status, enabled;
-+
-+ /* clear interrupt */
-+ /*
-+ * Don't clear RI bit if currently disabled.
-+ */
-+ status = sp->dma_regs->status;
-+ enabled = sp->dma_regs->intr_ena;
-+ sp->dma_regs->status = status & enabled;
-+
-+ if (status & DMA_STATUS_NIS) {
-+ /* normal status */
-+ /*
-+ * Don't schedule rx processing if interrupt
-+ * is already disabled.
-+ */
-+ if (status & enabled & DMA_STATUS_RI) {
-+ /* receive interrupt */
-+ rx_schedule(dev);
-+ }
-+ if (status & DMA_STATUS_TI) {
-+ /* transmit interrupt */
-+ ar231x_tx_int(dev);
-+ }
-+ }
-+
-+ /* abnormal status */
-+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
-+ ar231x_restart(dev);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int ar231x_open(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int ethsal, ethsah;
-+
-+ /* reset the hardware, in case the MAC address changed */
-+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-+
-+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-+
-+ sp->eth_regs->mac_addr[0] = ethsah;
-+ sp->eth_regs->mac_addr[1] = ethsal;
-+
-+ mdelay(10);
-+
-+ dev->mtu = 1500;
-+ netif_start_queue(dev);
-+
-+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-+
-+ return 0;
-+}
-+
-+static void ar231x_tx_timeout(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&sp->lock, flags);
-+ ar231x_restart(dev);
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+}
-+
-+static void ar231x_halt(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int j;
-+
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ /* kill the MAC */
-+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
-+ MAC_CONTROL_TE); /* disable Transmits */
-+ /* stop dma */
-+ sp->dma_regs->control = 0;
-+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-+
-+ /* place phy and MAC in reset */
-+ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
-+
-+ /* free buffers on tx ring */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ struct sk_buff *skb;
-+ ar231x_descr_t *txdesc;
-+
-+ txdesc = &sp->tx_ring[j];
-+ txdesc->descr = 0;
-+
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ dev_kfree_skb(skb);
-+ sp->tx_skb[j] = NULL;
-+ }
-+ }
-+}
-+
-+/*
-+ * close should do nothing. Here's why. It's called when
-+ * 'ifconfig bond0 down' is run. If it calls free_irq then
-+ * the irq is gone forever ! When bond0 is made 'up' again,
-+ * the ar231x_open () does not call request_irq (). Worse,
-+ * the call to ar231x_halt() generates a WDOG reset due to
-+ * the write to 'sp->int_regs' and the box reboots.
-+ * Commenting this out is good since it allows the
-+ * system to resume when bond0 is made up again.
-+ */
-+static int ar231x_close(struct net_device *dev)
-+{
-+#if 0
-+ /*
-+ * Disable interrupts
-+ */
-+ disable_irq(dev->irq);
-+
-+ /*
-+ * Without (or before) releasing irq and stopping hardware, this
-+ * is an absolute non-sense, by the way. It will be reset instantly
-+ * by the first irq.
-+ */
-+ netif_stop_queue(dev);
-+
-+ /* stop the MAC and DMA engines */
-+ ar231x_halt(dev);
-+
-+ /* release the interrupt */
-+ free_irq(dev->irq, dev);
-+
-+#endif
-+ return 0;
-+}
-+
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ ar231x_descr_t *td;
-+ u32 idx;
-+
-+ idx = sp->tx_prd;
-+ td = &sp->tx_ring[idx];
-+
-+ if (td->status & DMA_TX_OWN) {
-+ /* free skbuf and lie to the caller that we sent it out */
-+ dev->stats.tx_dropped++;
-+ dev_kfree_skb(skb);
-+
-+ /* restart transmitter in case locked */
-+ sp->dma_regs->xmt_poll = 0;
-+ return 0;
-+ }
-+
-+ /* Setup the transmit descriptor. */
-+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
-+ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
-+ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+ td->status = DMA_TX_OWN;
-+
-+ /* kick transmitter last */
-+ sp->dma_regs->xmt_poll = 0;
-+
-+ sp->tx_skb[idx] = skb;
-+ idx = DSC_NEXT(idx);
-+ sp->tx_prd = idx;
-+
-+ return 0;
-+}
-+
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int ret;
-+
-+ switch (cmd) {
-+
-+ case SIOCETHTOOL:
-+ spin_lock_irq(&sp->lock);
-+ ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
-+ spin_unlock_irq(&sp->lock);
-+ return ret;
-+
-+ case SIOCSIFHWADDR:
-+ if (copy_from_user
-+ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case SIOCGIFHWADDR:
-+ if (copy_to_user
-+ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case SIOCGMIIPHY:
-+ case SIOCGMIIREG:
-+ case SIOCSMIIREG:
-+ return phy_mii_ioctl(sp->phy_dev, data, cmd);
-+
-+ default:
-+ break;
-+ }
-+
-+ return -EOPNOTSUPP;
-+}
-+
-+static void ar231x_adjust_link(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int mc;
-+
-+ if (!sp->phy_dev->link)
-+ return;
-+
-+ if (sp->phy_dev->duplex != sp->oldduplex) {
-+ mc = readl(&sp->eth_regs->mac_control);
-+ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
-+ if (sp->phy_dev->duplex)
-+ mc |= MAC_CONTROL_F;
-+ else
-+ mc |= MAC_CONTROL_DRO;
-+ writel(mc, &sp->eth_regs->mac_control);
-+ sp->oldduplex = sp->phy_dev->duplex;
-+ }
-+}
-+
-+#define MII_ADDR(phy, reg) \
-+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
-+
-+static int
-+ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
-+{
-+ struct net_device *const dev = bus->priv;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-+
-+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ return (ethernet->mii_data >> MII_DATA_SHIFT);
-+}
-+
-+static int
-+ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
-+ u16 value)
-+{
-+ struct net_device *const dev = bus->priv;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-+
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ ethernet->mii_data = value << MII_DATA_SHIFT;
-+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
-+
-+ return 0;
-+}
-+
-+static int ar231x_mdiobus_reset(struct mii_bus *bus)
-+{
-+ struct net_device *const dev = bus->priv;
-+
-+ ar231x_reset_reg(dev);
-+
-+ return 0;
-+}
-+
-+static int ar231x_mdiobus_probe (struct net_device *dev)
-+{
-+ struct ar231x_private *const sp = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ int phy_addr;
-+
-+ /* find the first (lowest address) PHY on the current MAC's MII bus */
-+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
-+ if (sp->mii_bus->phy_map[phy_addr]) {
-+ phydev = sp->mii_bus->phy_map[phy_addr];
-+ sp->phy = phy_addr;
-+ break; /* break out with first one found */
-+ }
-+
-+ if (!phydev) {
-+ printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
-+ return -1;
-+ }
-+
-+ /* now we are supposed to have a proper phydev, to attach to... */
-+ BUG_ON(!phydev);
-+ BUG_ON(phydev->attached_dev);
-+
-+ phydev = phy_connect(dev, dev_name(&phydev->dev), &ar231x_adjust_link, 0,
-+ PHY_INTERFACE_MODE_MII);
-+
-+ if (IS_ERR(phydev)) {
-+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+ return PTR_ERR(phydev);
-+ }
-+
-+ /* mask with MAC supported features */
-+ phydev->supported &= (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_Autoneg
-+ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
-+
-+ phydev->advertising = phydev->supported;
-+
-+ sp->oldduplex = -1;
-+ sp->phy_dev = phydev;
-+
-+ printk(KERN_INFO "%s: attached PHY driver [%s] "
-+ "(mii_bus:phy_addr=%s)\n",
-+ dev->name, phydev->drv->name, dev_name(&phydev->dev));
-+
-+ return 0;
-+}
-+
---- /dev/null
-+++ b/drivers/net/ar231x.h
-@@ -0,0 +1,302 @@
-+/*
-+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef _AR2313_H_
-+#define _AR2313_H_
-+
-+#include <generated/autoconf.h>
-+#include <linux/bitops.h>
-+#include <asm/bootinfo.h>
-+#include <ar231x_platform.h>
-+
-+/*
-+ * probe link timer - 5 secs
-+ */
-+#define LINK_TIMER (5*HZ)
-+
-+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
-+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
-+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
-+
-+#define AR2313_TX_TIMEOUT (HZ/4)
-+
-+/*
-+ * Rings
-+ */
-+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
-+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
-+
-+#define AR2313_MBGET 2
-+#define AR2313_MBSET 3
-+#define AR2313_PCI_RECONFIG 4
-+#define AR2313_PCI_DUMP 5
-+#define AR2313_TEST_PANIC 6
-+#define AR2313_TEST_NULLPTR 7
-+#define AR2313_READ_DATA 8
-+#define AR2313_WRITE_DATA 9
-+#define AR2313_GET_VERSION 10
-+#define AR2313_TEST_HANG 11
-+#define AR2313_SYNC 12
-+
-+#define DMA_RX_ERR_CRC BIT(1)
-+#define DMA_RX_ERR_DRIB BIT(2)
-+#define DMA_RX_ERR_MII BIT(3)
-+#define DMA_RX_EV2 BIT(5)
-+#define DMA_RX_ERR_COL BIT(6)
-+#define DMA_RX_LONG BIT(7)
-+#define DMA_RX_LS BIT(8) /* last descriptor */
-+#define DMA_RX_FS BIT(9) /* first descriptor */
-+#define DMA_RX_MF BIT(10) /* multicast frame */
-+#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */
-+#define DMA_RX_ERR_LENGTH BIT(12) /* length error */
-+#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */
-+#define DMA_RX_ERROR BIT(15) /* error summary */
-+#define DMA_RX_LEN_MASK 0x3fff0000
-+#define DMA_RX_LEN_SHIFT 16
-+#define DMA_RX_FILT BIT(30)
-+#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */
-+
-+#define DMA_RX1_BSIZE_MASK 0x000007ff
-+#define DMA_RX1_BSIZE_SHIFT 0
-+#define DMA_RX1_CHAINED BIT(24)
-+#define DMA_RX1_RER BIT(25)
-+
-+#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */
-+#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */
-+#define DMA_TX_COL_MASK 0x78
-+#define DMA_TX_COL_SHIFT 3
-+#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */
-+#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */
-+#define DMA_TX_ERR_LATE BIT(9) /* late collision */
-+#define DMA_TX_ERR_LINK BIT(10) /* no carrier */
-+#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */
-+#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */
-+#define DMA_TX_ERROR BIT(15) /* frame aborted */
-+#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */
-+
-+#define DMA_TX1_BSIZE_MASK 0x000007ff
-+#define DMA_TX1_BSIZE_SHIFT 0
-+#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */
-+#define DMA_TX1_TER BIT(25) /* transmit end of ring */
-+#define DMA_TX1_FS BIT(29) /* first segment */
-+#define DMA_TX1_LS BIT(30) /* last segment */
-+#define DMA_TX1_IC BIT(31) /* interrupt on completion */
-+
-+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
-+
-+#define MAC_CONTROL_RE BIT(2) /* receive enable */
-+#define MAC_CONTROL_TE BIT(3) /* transmit enable */
-+#define MAC_CONTROL_DC BIT(5) /* Deferral check */
-+#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */
-+#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */
-+#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */
-+#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */
-+#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */
-+#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */
-+#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */
-+#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */
-+#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */
-+#define MAC_CONTROL_PR BIT(18) /* promiscuous mode (valid frames only) */
-+#define MAC_CONTROL_PM BIT(19) /* pass multicast */
-+#define MAC_CONTROL_F BIT(20) /* full-duplex */
-+#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */
-+#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */
-+#define MAC_CONTROL_BLE BIT(30) /* big endian mode */
-+#define MAC_CONTROL_RA BIT(31) /* receive all (valid and invalid frames) */
-+
-+#define MII_ADDR_BUSY BIT(0)
-+#define MII_ADDR_WRITE BIT(1)
-+#define MII_ADDR_REG_SHIFT 6
-+#define MII_ADDR_PHY_SHIFT 11
-+#define MII_DATA_SHIFT 0
-+
-+#define FLOW_CONTROL_FCE BIT(1)
-+
-+#define DMA_BUS_MODE_SWR BIT(0) /* software reset */
-+#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */
-+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
-+#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */
-+
-+#define DMA_STATUS_TI BIT(0) /* transmit interrupt */
-+#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */
-+#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */
-+#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */
-+#define DMA_STATUS_UNF BIT(5) /* transmit underflow */
-+#define DMA_STATUS_RI BIT(6) /* receive interrupt */
-+#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */
-+#define DMA_STATUS_RPS BIT(8) /* receive process stopped */
-+#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */
-+#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */
-+#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */
-+#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */
-+#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */
-+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
-+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
-+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
-+
-+#define DMA_CONTROL_SR BIT(1) /* start receive */
-+#define DMA_CONTROL_ST BIT(13) /* start transmit */
-+#define DMA_CONTROL_SF BIT(21) /* store and forward */
-+
-+
-+typedef struct {
-+ volatile unsigned int status; // OWN, Device control and status.
-+ volatile unsigned int devcs; // pkt Control bits + Length
-+ volatile unsigned int addr; // Current Address.
-+ volatile unsigned int descr; // Next descriptor in chain.
-+} ar231x_descr_t;
-+
-+
-+
-+//
-+// New Combo structure for Both Eth0 AND eth1
-+//
-+typedef struct {
-+ volatile unsigned int mac_control; /* 0x00 */
-+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
-+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
-+ volatile unsigned int mii_addr; /* 0x14 */
-+ volatile unsigned int mii_data; /* 0x18 */
-+ volatile unsigned int flow_control; /* 0x1c */
-+ volatile unsigned int vlan_tag; /* 0x20 */
-+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
-+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
-+
-+} ETHERNET_STRUCT;
-+
-+/********************************************************************
-+ * Interrupt controller
-+ ********************************************************************/
-+
-+typedef struct {
-+ volatile unsigned int wdog_control; /* 0x08 */
-+ volatile unsigned int wdog_timer; /* 0x0c */
-+ volatile unsigned int misc_status; /* 0x10 */
-+ volatile unsigned int misc_mask; /* 0x14 */
-+ volatile unsigned int global_status; /* 0x18 */
-+ volatile unsigned int reserved; /* 0x1c */
-+ volatile unsigned int reset_control; /* 0x20 */
-+} INTERRUPT;
-+
-+/********************************************************************
-+ * DMA controller
-+ ********************************************************************/
-+typedef struct {
-+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
-+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
-+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
-+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
-+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
-+ volatile unsigned int status; /* 0x14 (CSR5) */
-+ volatile unsigned int control; /* 0x18 (CSR6) */
-+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
-+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
-+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
-+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
-+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
-+} DMA;
-+
-+/*
-+ * Struct private for the Sibyte.
-+ *
-+ * Elements are grouped so variables used by the tx handling goes
-+ * together, and will go into the same cache lines etc. in order to
-+ * avoid cache line contention between the rx and tx handling on SMP.
-+ *
-+ * Frequently accessed variables are put at the beginning of the
-+ * struct to help the compiler generate better/shorter code.
-+ */
-+struct ar231x_private {
-+ struct net_device *dev;
-+ int version;
-+ u32 mb[2];
-+
-+ volatile ETHERNET_STRUCT *phy_regs;
-+ volatile ETHERNET_STRUCT *eth_regs;
-+ volatile DMA *dma_regs;
-+ volatile u32 *int_regs;
-+ struct ar231x_eth *cfg;
-+
-+ spinlock_t lock; /* Serialise access to device */
-+
-+ /*
-+ * RX and TX descriptors, must be adjacent
-+ */
-+ ar231x_descr_t *rx_ring;
-+ ar231x_descr_t *tx_ring;
-+
-+
-+ struct sk_buff **rx_skb;
-+ struct sk_buff **tx_skb;
-+
-+ /*
-+ * RX elements
-+ */
-+ u32 rx_skbprd;
-+ u32 cur_rx;
-+
-+ /*
-+ * TX elements
-+ */
-+ u32 tx_prd;
-+ u32 tx_csm;
-+
-+ /*
-+ * Misc elements
-+ */
-+ char name[48];
-+ struct {
-+ u32 address;
-+ u32 length;
-+ char *mapping;
-+ } desc;
-+
-+
-+ struct timer_list link_timer;
-+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
-+ unsigned short mac;
-+ unsigned short link; /* 0 - link down, 1 - link up */
-+ u16 phyData;
-+
-+ struct tasklet_struct rx_tasklet;
-+ int unloading;
-+
-+ struct phy_device *phy_dev;
-+ struct mii_bus *mii_bus;
-+ int oldduplex;
-+};
-+
-+
-+/*
-+ * Prototypes
-+ */
-+static int ar231x_init(struct net_device *dev);
-+#ifdef TX_TIMEOUT
-+static void ar231x_tx_timeout(struct net_device *dev);
-+#endif
-+static int ar231x_restart(struct net_device *dev);
-+static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
-+static int ar231x_open(struct net_device *dev);
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static int ar231x_close(struct net_device *dev);
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr,
-+ int cmd);
-+static void ar231x_init_cleanup(struct net_device *dev);
-+static int ar231x_setup_timer(struct net_device *dev);
-+static void ar231x_link_timer_fn(unsigned long data);
-+static void ar231x_check_link(struct net_device *dev);
-+#endif /* _AR2313_H_ */
diff --git a/target/linux/atheros/patches-2.6.35/120-spiflash.patch b/target/linux/atheros/patches-2.6.35/120-spiflash.patch
deleted file mode 100644
index 8e37146497..0000000000
--- a/target/linux/atheros/patches-2.6.35/120-spiflash.patch
+++ /dev/null
@@ -1,659 +0,0 @@
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
-@@ -112,6 +112,10 @@ config MTD_SST25L
- Set up your spi devices with the right board-specific platform data,
- if you want to specify device partitioning.
-
-+config MTD_AR2315
-+ tristate "Atheros AR2315+ SPI Flash support"
-+ depends on ATHEROS_AR2315
-+
- config MTD_SLRAM
- tristate "Uncached system RAM"
- help
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
- obj-$(CONFIG_MTD_SST25L) += sst25l.o
-+obj-$(CONFIG_MTD_AR2315) += ar2315.o
---- /dev/null
-+++ b/drivers/mtd/devices/ar2315.c
-@@ -0,0 +1,517 @@
-+
-+/*
-+ * MTD driver for the SPI Flash Memory support on Atheros AR2315
-+ *
-+ * Copyright (c) 2005-2006 Atheros Communications Inc.
-+ * Copyright (C) 2006-2007 FON Technology, SL.
-+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/platform_device.h>
-+#include <linux/sched.h>
-+#include <linux/root_dev.h>
-+#include <linux/delay.h>
-+#include <asm/delay.h>
-+#include <asm/io.h>
-+
-+#include <ar2315_spiflash.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+
-+
-+#define SPIFLASH "spiflash: "
-+#define busy_wait(_priv, _condition, _wait) do { \
-+ while (_condition) { \
-+ spin_unlock_bh(&_priv->lock); \
-+ if (_wait > 1) \
-+ msleep(_wait); \
-+ else if ((_wait == 1) && need_resched()) \
-+ schedule(); \
-+ else \
-+ udelay(1); \
-+ spin_lock_bh(&_priv->lock); \
-+ } \
-+} while (0)
-+
-+enum {
-+ FLASH_NONE,
-+ FLASH_1MB,
-+ FLASH_2MB,
-+ FLASH_4MB,
-+ FLASH_8MB,
-+ FLASH_16MB,
-+};
-+
-+/* Flash configuration table */
-+struct flashconfig {
-+ u32 byte_cnt;
-+ u32 sector_cnt;
-+ u32 sector_size;
-+};
-+
-+const struct flashconfig flashconfig_tbl[] = {
-+ [FLASH_NONE] = { 0, 0, 0},
-+ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE},
-+ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE},
-+ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE},
-+ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE},
-+ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE}
-+};
-+
-+/* Mapping of generic opcodes to STM serial flash opcodes */
-+enum {
-+ SPI_WRITE_ENABLE,
-+ SPI_WRITE_DISABLE,
-+ SPI_RD_STATUS,
-+ SPI_WR_STATUS,
-+ SPI_RD_DATA,
-+ SPI_FAST_RD_DATA,
-+ SPI_PAGE_PROGRAM,
-+ SPI_SECTOR_ERASE,
-+ SPI_BULK_ERASE,
-+ SPI_DEEP_PWRDOWN,
-+ SPI_RD_SIG,
-+};
-+
-+struct opcodes {
-+ __u16 code;
-+ __s8 tx_cnt;
-+ __s8 rx_cnt;
-+};
-+const struct opcodes stm_opcodes[] = {
-+ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
-+ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
-+ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
-+ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
-+ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
-+ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
-+ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
-+ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
-+ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
-+ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
-+ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
-+};
-+
-+/* Driver private data structure */
-+struct spiflash_priv {
-+ struct mtd_info mtd;
-+ void *readaddr; /* memory mapped data for read */
-+ void *mmraddr; /* memory mapped register space */
-+ wait_queue_head_t wq;
-+ spinlock_t lock;
-+ int state;
-+};
-+
-+#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
-+
-+enum {
-+ FL_READY,
-+ FL_READING,
-+ FL_ERASING,
-+ FL_WRITING
-+};
-+
-+/***************************************************************************************************/
-+
-+static u32
-+spiflash_read_reg(struct spiflash_priv *priv, int reg)
-+{
-+ return ar231x_read_reg((u32) priv->mmraddr + reg);
-+}
-+
-+static void
-+spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
-+{
-+ ar231x_write_reg((u32) priv->mmraddr + reg, data);
-+}
-+
-+static u32
-+spiflash_wait_busy(struct spiflash_priv *priv)
-+{
-+ u32 reg;
-+
-+ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
-+ SPI_CTL_BUSY, 0);
-+ return reg;
-+}
-+
-+static u32
-+spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr)
-+{
-+ const struct opcodes *op;
-+ u32 reg, mask;
-+
-+ op = &stm_opcodes[opcode];
-+ reg = spiflash_wait_busy(priv);
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE,
-+ ((u32) op->code) | (addr << 8));
-+
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
-+
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+ spiflash_wait_busy(priv);
-+
-+ if (!op->rx_cnt)
-+ return 0;
-+
-+ reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
-+
-+ switch (op->rx_cnt) {
-+ case 1:
-+ mask = 0x000000ff;
-+ break;
-+ case 2:
-+ mask = 0x0000ffff;
-+ break;
-+ case 3:
-+ mask = 0x00ffffff;
-+ break;
-+ default:
-+ mask = 0xffffffff;
-+ break;
-+ }
-+ reg &= mask;
-+
-+ return reg;
-+}
-+
-+
-+/*
-+ * Probe SPI flash device
-+ * Function returns 0 for failure.
-+ * and flashconfig_tbl array index for success.
-+ */
-+static int
-+spiflash_probe_chip (struct spiflash_priv *priv)
-+{
-+ u32 sig;
-+ int flash_size;
-+
-+ /* Read the signature on the flash device */
-+ spin_lock_bh(&priv->lock);
-+ sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
-+ spin_unlock_bh(&priv->lock);
-+
-+ switch (sig) {
-+ case STM_8MBIT_SIGNATURE:
-+ flash_size = FLASH_1MB;
-+ break;
-+ case STM_16MBIT_SIGNATURE:
-+ flash_size = FLASH_2MB;
-+ break;
-+ case STM_32MBIT_SIGNATURE:
-+ flash_size = FLASH_4MB;
-+ break;
-+ case STM_64MBIT_SIGNATURE:
-+ flash_size = FLASH_8MB;
-+ break;
-+ case STM_128MBIT_SIGNATURE:
-+ flash_size = FLASH_16MB;
-+ break;
-+ default:
-+ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
-+ return 0;
-+ }
-+
-+ return flash_size;
-+}
-+
-+
-+/* wait until the flash chip is ready and grab a lock */
-+static int spiflash_wait_ready(struct spiflash_priv *priv, int state)
-+{
-+ DECLARE_WAITQUEUE(wait, current);
-+
-+retry:
-+ spin_lock_bh(&priv->lock);
-+ if (priv->state != FL_READY) {
-+ set_current_state(TASK_UNINTERRUPTIBLE);
-+ add_wait_queue(&priv->wq, &wait);
-+ spin_unlock_bh(&priv->lock);
-+ schedule();
-+ remove_wait_queue(&priv->wq, &wait);
-+
-+ if(signal_pending(current))
-+ return 0;
-+
-+ goto retry;
-+ }
-+ priv->state = state;
-+
-+ return 1;
-+}
-+
-+static inline void spiflash_done(struct spiflash_priv *priv)
-+{
-+ priv->state = FL_READY;
-+ spin_unlock_bh(&priv->lock);
-+ wake_up(&priv->wq);
-+}
-+
-+static void
-+spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout)
-+{
-+ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
-+ SPI_STATUS_WIP, timeout);
-+ spiflash_done(priv);
-+}
-+
-+
-+
-+static int
-+spiflash_erase (struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ const struct opcodes *op;
-+ u32 temp, reg;
-+
-+ if (instr->addr + instr->len > mtd->size)
-+ return -EINVAL;
-+
-+ if (!spiflash_wait_ready(priv, FL_ERASING))
-+ return -EINTR;
-+
-+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+ reg = spiflash_wait_busy(priv);
-+
-+ op = &stm_opcodes[SPI_SECTOR_ERASE];
-+ temp = ((u32)instr->addr << 8) | (u32)(op->code);
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
-+
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= op->tx_cnt | SPI_CTL_START;
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+ spiflash_wait_complete(priv, 20);
-+
-+ instr->state = MTD_ERASE_DONE;
-+ mtd_erase_callback(instr);
-+
-+ return 0;
-+}
-+
-+static int
-+spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ u8 *read_addr;
-+
-+ if (!len)
-+ return 0;
-+
-+ if (from + len > mtd->size)
-+ return -EINVAL;
-+
-+ *retlen = len;
-+
-+ if (!spiflash_wait_ready(priv, FL_READING))
-+ return -EINTR;
-+
-+ read_addr = (u8 *)(priv->readaddr + from);
-+ memcpy_fromio(buf, read_addr, len);
-+ spiflash_done(priv);
-+
-+ return 0;
-+}
-+
-+static int
-+spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ u32 opcode, bytes_left;
-+
-+ *retlen = 0;
-+
-+ if (!len)
-+ return 0;
-+
-+ if (to + len > mtd->size)
-+ return -EINVAL;
-+
-+ bytes_left = len;
-+
-+ do {
-+ u32 read_len, reg, page_offset, spi_data = 0;
-+
-+ read_len = min(bytes_left, sizeof(u32));
-+
-+ /* 32-bit writes cannot span across a page boundary
-+ * (256 bytes). This types of writes require two page
-+ * program operations to handle it correctly. The STM part
-+ * will write the overflow data to the beginning of the
-+ * current page as opposed to the subsequent page.
-+ */
-+ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
-+
-+ if (page_offset > STM_PAGE_SIZE)
-+ read_len -= (page_offset - STM_PAGE_SIZE);
-+
-+ if (!spiflash_wait_ready(priv, FL_WRITING))
-+ return -EINTR;
-+
-+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+ spi_data = 0;
-+ switch (read_len) {
-+ case 4:
-+ spi_data |= buf[3] << 24;
-+ /* fall through */
-+ case 3:
-+ spi_data |= buf[2] << 16;
-+ /* fall through */
-+ case 2:
-+ spi_data |= buf[1] << 8;
-+ /* fall through */
-+ case 1:
-+ spi_data |= buf[0] & 0xff;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
-+ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
-+ (to & 0x00ffffff) << 8;
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
-+
-+ reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= (read_len + 4) | SPI_CTL_START;
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+ spiflash_wait_complete(priv, 1);
-+
-+ bytes_left -= read_len;
-+ to += read_len;
-+ buf += read_len;
-+
-+ *retlen += read_len;
-+ } while (bytes_left != 0);
-+
-+ return 0;
-+}
-+
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
-+#endif
-+
-+
-+static int
-+spiflash_probe(struct platform_device *pdev)
-+{
-+ struct spiflash_priv *priv;
-+ struct mtd_partition *parts;
-+ struct mtd_info *mtd;
-+ int index, num_parts;
-+ int result = 0;
-+
-+ priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL);
-+ spin_lock_init(&priv->lock);
-+ init_waitqueue_head(&priv->wq);
-+ priv->state = FL_READY;
-+ mtd = &priv->mtd;
-+
-+ priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
-+ if (!priv->mmraddr) {
-+ printk(KERN_WARNING SPIFLASH "Failed to map flash device\n");
-+ goto error;
-+ }
-+
-+ index = spiflash_probe_chip(priv);
-+ if (!index) {
-+ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
-+ goto error;
-+ }
-+
-+ priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
-+ if (!priv->readaddr) {
-+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
-+ goto error;
-+ }
-+
-+ platform_set_drvdata(pdev, priv);
-+ mtd->name = "spiflash";
-+ mtd->type = MTD_NORFLASH;
-+ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
-+ mtd->size = flashconfig_tbl[index].byte_cnt;
-+ mtd->erasesize = flashconfig_tbl[index].sector_size;
-+ mtd->writesize = 1;
-+ mtd->numeraseregions = 0;
-+ mtd->eraseregions = NULL;
-+ mtd->erase = spiflash_erase;
-+ mtd->read = spiflash_read;
-+ mtd->write = spiflash_write;
-+ mtd->owner = THIS_MODULE;
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+ /* parse redboot partitions */
-+ num_parts = parse_mtd_partitions(mtd, part_probe_types, &parts, 0);
-+ if (!num_parts)
-+ goto error;
-+
-+ result = add_mtd_partitions(mtd, parts, num_parts);
-+#endif
-+
-+ return result;
-+
-+error:
-+ if (priv->mmraddr)
-+ iounmap(priv->mmraddr);
-+ kfree(priv);
-+ return -ENXIO;
-+}
-+
-+static int
-+spiflash_remove (struct platform_device *pdev)
-+{
-+ struct spiflash_priv *priv = platform_get_drvdata(pdev);
-+ struct mtd_info *mtd = &priv->mtd;
-+
-+ del_mtd_partitions(mtd);
-+ iounmap(priv->mmraddr);
-+ iounmap(priv->readaddr);
-+ kfree(priv);
-+
-+ return 0;
-+}
-+
-+struct platform_driver spiflash_driver = {
-+ .driver.name = "spiflash",
-+ .probe = spiflash_probe,
-+ .remove = spiflash_remove,
-+};
-+
-+int __init
-+spiflash_init (void)
-+{
-+ return platform_driver_register(&spiflash_driver);
-+}
-+
-+void __exit
-+spiflash_exit (void)
-+{
-+ return platform_driver_unregister(&spiflash_driver);
-+}
-+
-+module_init (spiflash_init);
-+module_exit (spiflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
-+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
-+
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h
-@@ -0,0 +1,116 @@
-+/*
-+ * SPI Flash Memory support header file.
-+ *
-+ * Copyright (c) 2005, Atheros Communications Inc.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __AR2315_SPIFLASH_H
-+#define __AR2315_SPIFLASH_H
-+
-+#define STM_PAGE_SIZE 256
-+
-+#define SFI_WRITE_BUFFER_SIZE 4
-+#define SFI_FLASH_ADDR_MASK 0x00ffffff
-+
-+#define STM_8MBIT_SIGNATURE 0x13
-+#define STM_M25P80_BYTE_COUNT 1048576
-+#define STM_M25P80_SECTOR_COUNT 16
-+#define STM_M25P80_SECTOR_SIZE 0x10000
-+
-+#define STM_16MBIT_SIGNATURE 0x14
-+#define STM_M25P16_BYTE_COUNT 2097152
-+#define STM_M25P16_SECTOR_COUNT 32
-+#define STM_M25P16_SECTOR_SIZE 0x10000
-+
-+#define STM_32MBIT_SIGNATURE 0x15
-+#define STM_M25P32_BYTE_COUNT 4194304
-+#define STM_M25P32_SECTOR_COUNT 64
-+#define STM_M25P32_SECTOR_SIZE 0x10000
-+
-+#define STM_64MBIT_SIGNATURE 0x16
-+#define STM_M25P64_BYTE_COUNT 8388608
-+#define STM_M25P64_SECTOR_COUNT 128
-+#define STM_M25P64_SECTOR_SIZE 0x10000
-+
-+#define STM_128MBIT_SIGNATURE 0x17
-+#define STM_M25P128_BYTE_COUNT 16777216
-+#define STM_M25P128_SECTOR_COUNT 256
-+#define STM_M25P128_SECTOR_SIZE 0x10000
-+
-+#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
-+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
-+#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
-+#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
-+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
-+#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
-+#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
-+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
-+#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
-+#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
-+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
-+#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
-+#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
-+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
-+#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
-+
-+/*
-+ * ST Microelectronics Opcodes for Serial Flash
-+ */
-+
-+#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
-+#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
-+#define STM_OP_RD_STATUS 0x05 /* Read Status */
-+#define STM_OP_WR_STATUS 0x01 /* Write Status */
-+#define STM_OP_RD_DATA 0x03 /* Read Data */
-+#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
-+#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
-+#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
-+#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
-+#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
-+#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
-+
-+#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
-+#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
-+#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
-+#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
-+#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
-+#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+#define AR531XPLUS_SPI_READ 0x08000000
-+#define AR531XPLUS_SPI_MMR 0x11300000
-+#define AR531XPLUS_SPI_MMR_SIZE 12
-+
-+#define AR531XPLUS_SPI_CTL 0x00
-+#define AR531XPLUS_SPI_OPCODE 0x04
-+#define AR531XPLUS_SPI_DATA 0x08
-+
-+#define SPI_FLASH_READ AR531XPLUS_SPI_READ
-+#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
-+#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
-+#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
-+#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
-+#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
-+
-+#define SPI_CTL_START 0x00000100
-+#define SPI_CTL_BUSY 0x00010000
-+#define SPI_CTL_TXCNT_MASK 0x0000000f
-+#define SPI_CTL_RXCNT_MASK 0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
-+#define SPI_CTL_SIZE_MASK 0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK 0x03000000
-+#define SPI_OPCODE_MASK 0x000000ff
-+
-+#define SPI_STATUS_WIP STM_STATUS_WIP
-+
-+#endif
diff --git a/target/linux/atheros/patches-2.6.35/130-watchdog.patch b/target/linux/atheros/patches-2.6.35/130-watchdog.patch
deleted file mode 100644
index 80d244e447..0000000000
--- a/target/linux/atheros/patches-2.6.35/130-watchdog.patch
+++ /dev/null
@@ -1,228 +0,0 @@
---- /dev/null
-+++ b/drivers/watchdog/ar2315-wtd.c
-@@ -0,0 +1,200 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
-+ * Based on EP93xx and ifxmips wdt driver
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/fs.h>
-+#include <linux/ioport.h>
-+#include <linux/notifier.h>
-+#include <linux/reboot.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+#include <asm/system.h>
-+#include <asm/addrspace.h>
-+#include <ar231x_platform.h>
-+#include <ar2315_regs.h>
-+#include <ar231x.h>
-+
-+#define CLOCK_RATE 40000000
-+#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
-+
-+static int wdt_timeout = 20;
-+static int started = 0;
-+static int in_use = 0;
-+
-+static void
-+ar2315_wdt_enable(void)
-+{
-+ ar231x_write_reg(AR2315_WD, wdt_timeout * CLOCK_RATE);
-+ ar231x_write_reg(AR2315_ISR, 0x80);
-+}
-+
-+static ssize_t
-+ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
-+{
-+ if(len)
-+ ar2315_wdt_enable();
-+ return len;
-+}
-+
-+static int
-+ar2315_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if(in_use)
-+ return -EBUSY;
-+ ar2315_wdt_enable();
-+ in_use = started = 1;
-+ return nonseekable_open(inode, file);
-+}
-+
-+static int
-+ar2315_wdt_release(struct inode *inode, struct file *file)
-+{
-+ in_use = 0;
-+ return 0;
-+}
-+
-+static irqreturn_t
-+ar2315_wdt_interrupt(int irq, void *dev_id)
-+{
-+ if(started)
-+ {
-+ printk(KERN_CRIT "watchdog expired, rebooting system\n");
-+ emergency_restart();
-+ } else {
-+ ar231x_write_reg(AR2315_WDC, 0);
-+ ar231x_write_reg(AR2315_WD, 0);
-+ ar231x_write_reg(AR2315_ISR, 0x80);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static struct watchdog_info ident = {
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+ .identity = "ar2315 Watchdog",
-+};
-+
-+static int
-+ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ int new_wdt_timeout;
-+ int ret = -ENOIOCTLCMD;
-+
-+ switch(cmd)
-+ {
-+ case WDIOC_GETSUPPORT:
-+ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
-+ break;
-+
-+ case WDIOC_KEEPALIVE:
-+ ar2315_wdt_enable();
-+ ret = 0;
-+ break;
-+
-+ case WDIOC_SETTIMEOUT:
-+ if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
-+ break;
-+ wdt_timeout = HEARTBEAT(new_wdt_timeout);
-+ ar2315_wdt_enable();
-+ break;
-+
-+ case WDIOC_GETTIMEOUT:
-+ ret = put_user(wdt_timeout, (int __user *)arg);
-+ break;
-+ }
-+ return ret;
-+}
-+
-+static struct file_operations ar2315_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .write = ar2315_wdt_write,
-+ .ioctl = ar2315_wdt_ioctl,
-+ .open = ar2315_wdt_open,
-+ .release = ar2315_wdt_release,
-+};
-+
-+static struct miscdevice ar2315_wdt_miscdev = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &ar2315_wdt_fops,
-+};
-+
-+static int
-+ar2315_wdt_probe(struct platform_device *dev)
-+{
-+ int ret = 0;
-+
-+ ar2315_wdt_enable();
-+ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
-+ if(ret)
-+ {
-+ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
-+ goto out;
-+ }
-+
-+ ret = misc_register(&ar2315_wdt_miscdev);
-+ if(ret)
-+ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
-+
-+out:
-+ return ret;
-+}
-+
-+static int
-+ar2315_wdt_remove(struct platform_device *dev)
-+{
-+ misc_deregister(&ar2315_wdt_miscdev);
-+ free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver ar2315_wdt_driver = {
-+ .probe = ar2315_wdt_probe,
-+ .remove = ar2315_wdt_remove,
-+ .driver = {
-+ .name = "ar2315_wdt",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init
-+init_ar2315_wdt(void)
-+{
-+ int ret = platform_driver_register(&ar2315_wdt_driver);
-+ if(ret)
-+ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
-+ return ret;
-+}
-+
-+static void __exit
-+exit_ar2315_wdt(void)
-+{
-+ platform_driver_unregister(&ar2315_wdt_driver);
-+}
-+
-+module_init(init_ar2315_wdt);
-+module_exit(exit_ar2315_wdt);
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -857,6 +857,12 @@ config TXX9_WDT
- help
- Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-
-+config ATHEROS_WDT
-+ tristate "Atheros wisoc Watchdog Timer"
-+ depends on ATHEROS_AR231X
-+ help
-+ Hardware driver for the Atheros wisoc Watchdog Timer.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -113,6 +113,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
-
- # PARISC Architecture
-
diff --git a/target/linux/atheros/patches-2.6.35/140-redboot_partition_scan.patch b/target/linux/atheros/patches-2.6.35/140-redboot_partition_scan.patch
deleted file mode 100644
index 289d4eb990..0000000000
--- a/target/linux/atheros/patches-2.6.35/140-redboot_partition_scan.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
- }
- } else {
- offset = directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- offset += master->erasesize;
- if (offset == master->size)
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
--
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-
-@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
diff --git a/target/linux/atheros/patches-2.6.35/141-redboot_various_erase_size_fix.patch b/target/linux/atheros/patches-2.6.35/141-redboot_various_erase_size_fix.patch
deleted file mode 100644
index b9cb0b4bcd..0000000000
--- a/target/linux/atheros/patches-2.6.35/141-redboot_various_erase_size_fix.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -39,6 +39,22 @@ static inline int redboot_checksum(struc
- return 1;
- }
-
-+static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset)
-+{
-+ struct mtd_erase_region_info *regions = mtd->eraseregions;
-+ int i;
-+
-+ for (i = 0; i < mtd->numeraseregions; i++) {
-+ if (regions[i].offset +
-+ regions[i].numblocks * regions[i].erasesize <= offset)
-+ continue;
-+
-+ return regions[i].erasesize;
-+ }
-+
-+ return mtd->erasesize;
-+}
-+
- static int parse_redboot_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long fis_origin)
-@@ -55,6 +71,7 @@ static int parse_redboot_partitions(stru
- int namelen = 0;
- int nulllen = 0;
- int numslots;
-+ int first_slot;
- unsigned long offset;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- static char nullstring[] = "unallocated";
-@@ -168,7 +185,10 @@ static int parse_redboot_partitions(stru
- goto out;
- }
-
-- for (i = 0; i < numslots; i++) {
-+ first_slot = (buf[i].flash_base & (master->erasesize - 1)) /
-+ sizeof(struct fis_image_desc);
-+
-+ for (i = first_slot; i < first_slot + numslots; i++) {
- struct fis_list *new_fl, **prev;
-
- if (buf[i].name[0] == 0xff) {
-@@ -244,12 +264,13 @@ static int parse_redboot_partitions(stru
- }
- #endif
- for ( ; i<nrparts; i++) {
-- if(max_offset < buf[i].flash_base + buf[i].size)
-- max_offset = buf[i].flash_base + buf[i].size;
- parts[i].size = fl->img->size;
- parts[i].offset = fl->img->flash_base;
- parts[i].name = names;
-
-+ if (max_offset < parts[i].offset + parts[i].size)
-+ max_offset = parts[i].offset + parts[i].size;
-+
- strcpy(names, fl->img->name);
- #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY
- if (!memcmp(names, "RedBoot", 8) ||
-@@ -279,7 +300,9 @@ static int parse_redboot_partitions(stru
- fl = fl->next;
- kfree(tmp_fl);
- }
-- if(master->size - max_offset >= master->erasesize)
-+
-+ if (master->size - max_offset >=
-+ mtd_get_offset_erasesize(master, max_offset))
- {
- parts[nrparts].size = master->size - max_offset;
- parts[nrparts].offset = max_offset;
diff --git a/target/linux/atheros/patches-2.6.35/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.35/200-ar2313_enable_mvswitch.patch
deleted file mode 100644
index 60025e43ea..0000000000
--- a/target/linux/atheros/patches-2.6.35/200-ar2313_enable_mvswitch.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/drivers/net/ar231x.c
-+++ b/drivers/net/ar231x.c
-@@ -735,6 +735,7 @@ static void ar231x_load_rx_ring(struct n
- for (i = 0; i < nr_bufs; i++) {
- struct sk_buff *skb;
- ar231x_descr_t *rd;
-+ int offset = RX_OFFSET;
-
- if (sp->rx_skb[idx])
- break;
-@@ -750,7 +751,9 @@ static void ar231x_load_rx_ring(struct n
- * Make sure IP header starts on a fresh cache line.
- */
- skb->dev = dev;
-- skb_reserve(skb, RX_OFFSET);
-+ if (sp->phy_dev)
-+ offset += sp->phy_dev->pkt_align;
-+ skb_reserve(skb, offset);
- sp->rx_skb[idx] = skb;
-
- rd = (ar231x_descr_t *) & sp->rx_ring[idx];
-@@ -824,20 +827,23 @@ static int ar231x_rx_int(struct net_devi
- /* alloc new buffer. */
- skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
- if (skb_new != NULL) {
-+ int offset;
-
- skb = sp->rx_skb[idx];
- /* set skb */
- skb_put(skb,
- ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
--
- dev->stats.rx_bytes += skb->len;
-- skb->protocol = eth_type_trans(skb, dev);
-- /* pass the packet to upper layers */
-- netif_rx(skb);
-
-+ /* pass the packet to upper layers */
-+ sp->rx(skb);
- skb_new->dev = dev;
-+
- /* 16 bit align */
-- skb_reserve(skb_new, RX_OFFSET);
-+ offset = RX_OFFSET;
-+ if (sp->phy_dev)
-+ offset += sp->phy_dev->pkt_align;
-+ skb_reserve(skb_new, offset);
- /* reset descriptor's curr_addr */
- rxdesc->addr = virt_to_phys(skb_new->data);
-
-@@ -1239,6 +1245,8 @@ static int ar231x_mdiobus_probe (struct
- return PTR_ERR(phydev);
- }
-
-+ sp->rx = phydev->netif_rx;
-+
- /* mask with MAC supported features */
- phydev->supported &= (SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
---- a/drivers/net/ar231x.h
-+++ b/drivers/net/ar231x.h
-@@ -221,6 +221,8 @@ typedef struct {
- */
- struct ar231x_private {
- struct net_device *dev;
-+ int (*rx)(struct sk_buff *skb);
-+
- int version;
- u32 mb[2];
-
diff --git a/target/linux/atheros/patches-2.6.35/210-reset_button.patch b/target/linux/atheros/patches-2.6.35/210-reset_button.patch
deleted file mode 100644
index 3c91818146..0000000000
--- a/target/linux/atheros/patches-2.6.35/210-reset_button.patch
+++ /dev/null
@@ -1,174 +0,0 @@
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -8,7 +8,7 @@
- # Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
- #
-
--obj-y += board.o prom.o devices.o
-+obj-y += board.o prom.o devices.o reset.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
---- /dev/null
-+++ b/arch/mips/ar231x/reset.c
-@@ -0,0 +1,160 @@
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/kobject.h>
-+#include <linux/workqueue.h>
-+#include <linux/skbuff.h>
-+#include <linux/netlink.h>
-+#include <net/sock.h>
-+#include <asm/uaccess.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include <gpio.h>
-+#include "devices.h"
-+
-+#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(ar231x_board.config->resetConfigGpio))
-+
-+struct event_t {
-+ struct work_struct wq;
-+ int set;
-+ unsigned long jiffies;
-+};
-+
-+static struct timer_list rst_button_timer;
-+static unsigned long seen;
-+
-+extern struct sock *uevent_sock;
-+extern u64 uevent_next_seqnum(void);
-+
-+static int no_release_workaround = 1;
-+module_param(no_release_workaround, int, 0);
-+
-+static inline void
-+add_msg(struct sk_buff *skb, char *msg)
-+{
-+ char *scratch;
-+ scratch = skb_put(skb, strlen(msg) + 1);
-+ sprintf(scratch, msg);
-+}
-+
-+static void
-+hotplug_button(struct work_struct *wq)
-+{
-+ struct sk_buff *skb;
-+ struct event_t *event;
-+ size_t len;
-+ char *scratch, *s;
-+ char buf[128];
-+
-+ event = container_of(wq, struct event_t, wq);
-+ if (!uevent_sock)
-+ goto done;
-+
-+ /* allocate message with the maximum possible size */
-+ s = event->set ? "pressed" : "released";
-+ len = strlen(s) + 2;
-+ skb = alloc_skb(NLMSG_GOODSIZE, GFP_KERNEL);
-+ if (!skb)
-+ goto done;
-+
-+ /* add header */
-+ scratch = skb_put(skb, len);
-+ sprintf(scratch, "%s@",s);
-+
-+ /* copy keys to our continuous event payload buffer */
-+ add_msg(skb, "HOME=/");
-+ add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin");
-+ add_msg(skb, "SUBSYSTEM=button");
-+ add_msg(skb, "BUTTON=reset");
-+ add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released"));
-+ sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ);
-+ add_msg(skb, buf);
-+ snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
-+ add_msg(skb, buf);
-+
-+ NETLINK_CB(skb).dst_group = 1;
-+ netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
-+
-+done:
-+ kfree(event);
-+}
-+
-+static void
-+reset_button_poll(unsigned long unused)
-+{
-+ struct event_t *event;
-+ int gpio = ~0;
-+
-+ if(!no_release_workaround)
-+ return;
-+
-+ gpio = ar231x_gpiodev->get();
-+ gpio &= (1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE));
-+ if(gpio) {
-+ rst_button_timer.expires = jiffies + (HZ / 4);
-+ add_timer(&rst_button_timer);
-+ return;
-+ }
-+
-+ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
-+ if (!event)
-+ return;
-+
-+ event->set = 0;
-+ event->jiffies = jiffies;
-+ INIT_WORK(&event->wq, hotplug_button);
-+ schedule_work(&event->wq);
-+}
-+
-+static irqreturn_t
-+button_handler(int irq, void *dev_id)
-+{
-+ static int pressed = 0;
-+ struct event_t *event;
-+ u32 gpio = ~0;
-+
-+ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
-+ if (!event)
-+ return IRQ_NONE;
-+
-+ pressed = !pressed;
-+
-+ gpio = ar231x_gpiodev->get() & (1 << (irq - AR531X_GPIO_IRQ_BASE));
-+
-+ event->set = gpio;
-+ if(!event->set)
-+ no_release_workaround = 0;
-+
-+ event->jiffies = jiffies;
-+
-+ INIT_WORK(&event->wq, hotplug_button);
-+ schedule_work(&event->wq);
-+
-+ seen = jiffies;
-+ if(event->set && no_release_workaround)
-+ mod_timer(&rst_button_timer, jiffies + (HZ / 4));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int __init
-+ar231x_init_reset(void)
-+{
-+ seen = jiffies;
-+
-+ if (ar231x_board.config->resetConfigGpio == 0xffff)
-+ return -ENODEV;
-+
-+ init_timer(&rst_button_timer);
-+ rst_button_timer.function = reset_button_poll;
-+ rst_button_timer.expires = jiffies + HZ / 50;
-+ add_timer(&rst_button_timer);
-+
-+ request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar231x_reset", NULL);
-+
-+ return 0;
-+}
-+
-+module_init(ar231x_init_reset);
diff --git a/target/linux/atheros/patches-2.6.35/211-reset_button-2.6.35.patch b/target/linux/atheros/patches-2.6.35/211-reset_button-2.6.35.patch
deleted file mode 100644
index 6cf51502bc..0000000000
--- a/target/linux/atheros/patches-2.6.35/211-reset_button-2.6.35.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/mips/ar231x/reset.c
-+++ b/arch/mips/ar231x/reset.c
-@@ -24,7 +24,8 @@ struct event_t {
- static struct timer_list rst_button_timer;
- static unsigned long seen;
-
--extern struct sock *uevent_sock;
-+extern struct sock *uevent_sock = NULL;
-+EXPORT_SYMBOL_GPL(uevent_sock);
- extern u64 uevent_next_seqnum(void);
-
- static int no_release_workaround = 1;
diff --git a/target/linux/atheros/patches-2.6.35/220-enet_micrel_workaround.patch b/target/linux/atheros/patches-2.6.35/220-enet_micrel_workaround.patch
deleted file mode 100644
index 989bd76068..0000000000
--- a/target/linux/atheros/patches-2.6.35/220-enet_micrel_workaround.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/drivers/net/ar231x.c
-+++ b/drivers/net/ar231x.c
-@@ -148,6 +148,7 @@ static int ar231x_mdiobus_write(struct m
- static int ar231x_mdiobus_reset(struct mii_bus *bus);
- static int ar231x_mdiobus_probe (struct net_device *dev);
- static void ar231x_adjust_link(struct net_device *dev);
-+static bool no_phy = false;
-
- #ifndef ERR
- #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-@@ -278,6 +279,21 @@ int __init ar231x_probe(struct platform_
-
- mdiobus_register(sp->mii_bus);
-
-+ /* Workaround for Micrel switch, which is only available on
-+ * one PHY and cannot be configured through MDIO */
-+ if (!no_phy) {
-+ u32 phy_id = 0;
-+ get_phy_id(sp->mii_bus, 1, &phy_id);
-+ if (phy_id == 0x00221450)
-+ no_phy = true;
-+ }
-+ if (no_phy) {
-+ sp->link = 1;
-+ netif_carrier_on(dev);
-+ return 0;
-+ }
-+ no_phy = true;
-+
- if (ar231x_mdiobus_probe(dev) != 0) {
- printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
- rx_tasklet_cleanup(dev);
-@@ -334,8 +350,10 @@ static int __devexit ar231x_remove(struc
- rx_tasklet_cleanup(dev);
- ar231x_init_cleanup(dev);
- unregister_netdev(dev);
-- mdiobus_unregister(sp->mii_bus);
-- mdiobus_free(sp->mii_bus);
-+ if (sp->mii_bus) {
-+ mdiobus_unregister(sp->mii_bus);
-+ mdiobus_free(sp->mii_bus);
-+ }
- kfree(dev);
- return 0;
- }
-@@ -836,7 +854,12 @@ static int ar231x_rx_int(struct net_devi
- dev->stats.rx_bytes += skb->len;
-
- /* pass the packet to upper layers */
-- sp->rx(skb);
-+ if (sp->rx) {
-+ sp->rx(skb);
-+ } else {
-+ skb->protocol = eth_type_trans(skb, skb->dev);
-+ netif_rx(skb);
-+ }
- skb_new->dev = dev;
-
- /* 16 bit align */
-@@ -1123,6 +1146,9 @@ static int ar231x_ioctl(struct net_devic
- struct ar231x_private *sp = netdev_priv(dev);
- int ret;
-
-+ if (!sp->phy_dev)
-+ return -ENODEV;
-+
- switch (cmd) {
-
- case SIOCETHTOOL:
diff --git a/target/linux/atheros/patches-2.6.36/001-get_c0_compare_int_fix.patch b/target/linux/atheros/patches-2.6.36/001-get_c0_compare_int_fix.patch
deleted file mode 100644
index 0f6873ddca..0000000000
--- a/target/linux/atheros/patches-2.6.36/001-get_c0_compare_int_fix.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-Fix the usage of get_c0_compare_int: override cp0_compare_irq if the returned
-value is in the MIPS CPU IRQ range to ensure that c0_compare_int_usable()
-still works.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -167,20 +167,23 @@ int __cpuinit r4k_clockevent_init(void)
- struct clock_event_device *cd;
- unsigned int irq;
-
-- if (!cpu_has_counter || !mips_hpt_frequency)
-- return -ENXIO;
--
-- if (!c0_compare_int_usable())
-- return -ENXIO;
--
- /*
- * With vectored interrupts things are getting platform specific.
- * get_c0_compare_int is a hook to allow a platform to return the
- * interrupt number of it's liking.
- */
- irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
-- if (get_c0_compare_int)
-+ if (get_c0_compare_int) {
- irq = get_c0_compare_int();
-+ if ((irq >= MIPS_CPU_IRQ_BASE) && (irq < MIPS_CPU_IRQ_BASE + 8))
-+ cp0_compare_irq = irq - MIPS_CPU_IRQ_BASE;
-+ }
-+
-+ if (!cpu_has_counter || !mips_hpt_frequency)
-+ return -ENXIO;
-+
-+ if (!c0_compare_int_usable())
-+ return -ENXIO;
-
- cd = &per_cpu(mips_clockevent_device, cpu);
-
diff --git a/target/linux/atheros/patches-2.6.36/100-board.patch b/target/linux/atheros/patches-2.6.36/100-board.patch
deleted file mode 100644
index c697b4b2d0..0000000000
--- a/target/linux/atheros/patches-2.6.36/100-board.patch
+++ /dev/null
@@ -1,3129 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -97,6 +97,19 @@ config BCM63XX
- help
- Support for BCM63XX based boards
-
-+config ATHEROS_AR231X
-+ bool "Atheros 231x/531x SoC support"
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select GENERIC_GPIO
-+ help
-+ Support for AR231x and AR531x based boards
-+
- config MIPS_COBALT
- bool "Cobalt Server"
- select CEVT_R4K
-@@ -708,6 +721,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
-
- endchoice
-
-+source "arch/mips/ar231x/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -5,6 +5,7 @@ platforms += ar7
- platforms += bcm47xx
- platforms += bcm63xx
- platforms += cavium-octeon
-+platforms += ar231x
- platforms += cobalt
- platforms += dec
- platforms += emma
---- /dev/null
-+++ b/arch/mips/ar231x/Platform
-@@ -0,0 +1,6 @@
-+#
-+# Atheros AR5312/AR2312 WiSoC
-+#
-+platform-$(CONFIG_ATHEROS_AR231X) += ar231x/
-+cflags-$(CONFIG_ATHEROS_AR231X) += -I$(srctree)/arch/mips/include/asm/mach-ar231x
-+load-$(CONFIG_ATHEROS_AR231X) += 0xffffffff80041000
---- /dev/null
-+++ b/arch/mips/ar231x/Kconfig
-@@ -0,0 +1,17 @@
-+config ATHEROS_AR5312
-+ bool "Atheros 5312/2312+ support"
-+ depends on ATHEROS_AR231X
-+ default y
-+
-+config ATHEROS_AR2315
-+ bool "Atheros 2315+ support"
-+ depends on ATHEROS_AR231X
-+ select DMA_NONCOHERENT
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select GENERIC_GPIO
-+ default y
---- /dev/null
-+++ b/arch/mips/ar231x/Makefile
-@@ -0,0 +1,13 @@
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License. See the file "COPYING" in the main directory of this archive
-+# for more details.
-+#
-+# Copyright (C) 2006 FON Technology, SL.
-+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+#
-+
-+obj-y += board.o prom.o devices.o
-+obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
-+obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
---- /dev/null
-+++ b/arch/mips/ar231x/board.c
-@@ -0,0 +1,251 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/random.h>
-+#include <linux/etherdevice.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/reboot.h>
-+#include <asm/io.h>
-+
-+#include <ar231x_platform.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+void (*ar231x_irq_dispatch)(void);
-+
-+static inline bool
-+check_radio_magic(u8 *addr)
-+{
-+ addr += 0x7a; /* offset for flash magic */
-+ if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static inline bool
-+check_board_data(u8 *flash_limit, u8 *addr, bool broken)
-+{
-+ /* config magic found */
-+ if (*((u32 *)addr) == AR531X_BD_MAGIC)
-+ return 1;
-+
-+ if (!broken)
-+ return 0;
-+
-+ if (check_radio_magic(addr + 0xf8))
-+ ar231x_board.radio = addr + 0xf8;
-+ if ((addr < flash_limit + 0x10000) &&
-+ check_radio_magic(addr + 0x10000))
-+ ar231x_board.radio = addr + 0x10000;
-+
-+ if (ar231x_board.radio) {
-+ /* broken board data detected, use radio data to find the offset,
-+ * user will fix this */
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+static u8 *
-+find_board_config(u8 *flash_limit, bool broken)
-+{
-+ u8 *addr;
-+ int found = 0;
-+
-+ for (addr = flash_limit - 0x1000;
-+ addr >= flash_limit - 0x30000;
-+ addr -= 0x1000) {
-+
-+ if (check_board_data(flash_limit, addr, broken)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ if (!found)
-+ addr = NULL;
-+
-+ return addr;
-+}
-+
-+static u8 *
-+find_radio_config(u8 *flash_limit, u8 *board_config)
-+{
-+ int found;
-+ u8 *radio_config;
-+
-+ /*
-+ * Now find the start of Radio Configuration data, using heuristics:
-+ * Search forward from Board Configuration data by 0x1000 bytes
-+ * at a time until we find non-0xffffffff.
-+ */
-+ found = 0;
-+ for (radio_config = board_config + 0x1000;
-+ (radio_config < flash_limit);
-+ radio_config += 0x1000) {
-+ if ((*(u32 *)radio_config != 0xffffffff) &&
-+ check_radio_magic(radio_config)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ /* AR2316 relocates radio config to new location */
-+ if (!found) {
-+ for (radio_config = board_config + 0xf8;
-+ (radio_config < flash_limit - 0x1000 + 0xf8);
-+ radio_config += 0x1000) {
-+ if ((*(u32 *)radio_config != 0xffffffff) &&
-+ check_radio_magic(radio_config)) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (!found) {
-+ printk("Could not find Radio Configuration data\n");
-+ radio_config = 0;
-+ }
-+
-+ return (u8 *) radio_config;
-+}
-+
-+int __init
-+ar231x_find_config(u8 *flash_limit)
-+{
-+ struct ar231x_boarddata *config;
-+ unsigned int rcfg_size;
-+ int broken_boarddata = 0;
-+ u8 *bcfg, *rcfg;
-+ u8 *board_data;
-+ u8 *radio_data;
-+ u32 offset;
-+
-+ ar231x_board.config = NULL;
-+ ar231x_board.radio = NULL;
-+ /* Copy the board and radio data to RAM, because accessing the mapped
-+ * memory of the flash directly after booting is not safe */
-+
-+ /* Try to find valid board and radio data */
-+ bcfg = find_board_config(flash_limit, false);
-+
-+ /* If that fails, try to at least find valid radio data */
-+ if (!bcfg) {
-+ bcfg = find_board_config(flash_limit, true);
-+ broken_boarddata = 1;
-+ }
-+
-+ if (!bcfg) {
-+ printk(KERN_WARNING "WARNING: No board configuration data found!\n");
-+ return -ENODEV;
-+ }
-+
-+ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
-+ ar231x_board.config = (struct ar231x_boarddata *) board_data;
-+ memcpy(board_data, bcfg, 0x100);
-+ if (broken_boarddata) {
-+ printk(KERN_WARNING "WARNING: broken board data detected\n");
-+ config = ar231x_board.config;
-+ if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) {
-+ printk(KERN_INFO "Fixing up empty mac addresses\n");
-+ config->resetConfigGpio = 0xffff;
-+ config->sysLedGpio = 0xffff;
-+ random_ether_addr(config->wlan0_mac);
-+ config->wlan0_mac[0] &= ~0x06;
-+ random_ether_addr(config->enet0_mac);
-+ random_ether_addr(config->enet1_mac);
-+ }
-+ }
-+
-+
-+ /* Radio config starts 0x100 bytes after board config, regardless
-+ * of what the physical layout on the flash chip looks like */
-+
-+ if (ar231x_board.radio)
-+ rcfg = (u8 *) ar231x_board.radio;
-+ else
-+ rcfg = find_radio_config(flash_limit, bcfg);
-+
-+ if (!rcfg)
-+ return -ENODEV;
-+
-+ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
-+ ar231x_board.radio = radio_data;
-+ offset = radio_data - board_data;
-+ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset);
-+ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
-+ memcpy(radio_data, rcfg, rcfg_size);
-+
-+ return 0;
-+}
-+
-+static void
-+ar231x_halt(void)
-+{
-+ local_irq_disable();
-+ while (1);
-+}
-+
-+void __init
-+plat_mem_setup(void)
-+{
-+ _machine_halt = ar231x_halt;
-+ pm_power_off = ar231x_halt;
-+
-+ ar5312_plat_setup();
-+ ar2315_plat_setup();
-+
-+ /* Disable data watchpoints */
-+ write_c0_watchlo0(0);
-+}
-+
-+
-+asmlinkage void
-+plat_irq_dispatch(void)
-+{
-+ ar231x_irq_dispatch();
-+}
-+
-+void __init
-+plat_time_init(void)
-+{
-+ ar5312_time_init();
-+ ar2315_time_init();
-+}
-+
-+unsigned int __cpuinit
-+get_c0_compare_int(void)
-+{
-+ return CP0_LEGACY_COMPARE_IRQ;
-+}
-+
-+void __init
-+arch_init_irq(void)
-+{
-+ clear_c0_status(ST0_IM);
-+ mips_cpu_irq_init();
-+
-+ /* Initialize interrupt controllers */
-+ ar5312_irq_init();
-+ ar2315_irq_init();
-+}
-+
-+
---- /dev/null
-+++ b/arch/mips/ar231x/prom.c
-@@ -0,0 +1,37 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright MontaVista Software Inc
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Prom setup file for ar531x
-+ */
-+
-+#include <linux/init.h>
-+#include <generated/autoconf.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/bootinfo.h>
-+#include <asm/addrspace.h>
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+void __init prom_init(void)
-+{
-+ ar5312_prom_init();
-+ ar2315_prom_init();
-+}
-+
-+void __init prom_free_prom_memory(void)
-+{
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
-@@ -0,0 +1,83 @@
-+#ifndef __AR531X_PLATFORM_H
-+#define __AR531X_PLATFORM_H
-+
-+/*
-+ * This is board-specific data that is stored in a "fixed" location in flash.
-+ * It is shared across operating systems, so it should not be changed lightly.
-+ * The main reason we need it is in order to extract the ethernet MAC
-+ * address(es).
-+ */
-+struct ar231x_boarddata {
-+ u32 magic; /* board data is valid */
-+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
-+ u16 cksum; /* checksum (starting with BD_REV 2) */
-+ u16 rev; /* revision of this struct */
-+#define BD_REV 4
-+ char boardName[64]; /* Name of board */
-+ u16 major; /* Board major number */
-+ u16 minor; /* Board minor number */
-+ u32 flags; /* Board configuration */
-+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
-+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
-+#define BD_UART1 0x00000004 /* UART1 is stuffed */
-+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
-+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
-+#define BD_SYSLED 0x00000020 /* System LED stuffed */
-+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
-+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
-+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
-+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
-+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
-+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
-+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
-+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
-+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
-+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
-+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
-+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
-+ u16 resetConfigGpio; /* Reset factory GPIO pin */
-+ u16 sysLedGpio; /* System LED GPIO pin */
-+
-+ u32 cpuFreq; /* CPU core frequency in Hz */
-+ u32 sysFreq; /* System frequency in Hz */
-+ u32 cntFreq; /* Calculated C0_COUNT frequency */
-+
-+ u8 wlan0_mac[6];
-+ u8 enet0_mac[6];
-+ u8 enet1_mac[6];
-+
-+ u16 pciId; /* Pseudo PCIID for common code */
-+ u16 memCap; /* cap bank1 in MB */
-+
-+ /* version 3 */
-+ u8 wlan1_mac[6]; /* (ar5212) */
-+};
-+
-+#define BOARD_CONFIG_BUFSZ 0x1000
-+
-+/*
-+ * Platform device information for the Wireless MAC
-+ */
-+struct ar231x_board_config {
-+ u16 devid;
-+
-+ /* board config data */
-+ struct ar231x_boarddata *config;
-+
-+ /* radio calibration data */
-+ const char *radio;
-+};
-+
-+/*
-+ * Platform device information for the Ethernet MAC
-+ */
-+struct ar231x_eth {
-+ u32 reset_base;
-+ u32 reset_mac;
-+ u32 reset_phy;
-+ u32 phy_base;
-+ struct ar231x_board_config *config;
-+ char *macaddr;
-+};
-+
-+#endif /* __AR531X_PLATFORM_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
-@@ -0,0 +1,84 @@
-+/*
-+ * Atheros SoC specific CPU feature overrides
-+ *
-+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was derived from: include/asm-mips/cpu-features.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ * Copyright (C) 2004 Maciej W. Rozycki
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
-+
-+/*
-+ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
-+ */
-+#define cpu_has_tlb 1
-+#define cpu_has_4kex 1
-+#define cpu_has_3k_cache 0
-+#define cpu_has_4k_cache 1
-+#define cpu_has_tx39_cache 0
-+#define cpu_has_sb1_cache 0
-+#define cpu_has_fpu 0
-+#define cpu_has_32fpr 0
-+#define cpu_has_counter 1
-+/* #define cpu_has_watch ? */
-+/* #define cpu_has_divec ? */
-+/* #define cpu_has_vce ? */
-+/* #define cpu_has_cache_cdex_p ? */
-+/* #define cpu_has_cache_cdex_s ? */
-+/* #define cpu_has_prefetch ? */
-+/* #define cpu_has_mcheck ? */
-+#define cpu_has_ejtag 1
-+
-+#if !defined(CONFIG_ATHEROS_AR5312)
-+# define cpu_has_llsc 1
-+#else
-+/*
-+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
-+ * ll/sc instructions.
-+ */
-+# define cpu_has_llsc 0
-+#endif
-+
-+#define cpu_has_mips16 0
-+#define cpu_has_mdmx 0
-+#define cpu_has_mips3d 0
-+#define cpu_has_smartmips 0
-+
-+/* #define cpu_has_vtag_icache ? */
-+/* #define cpu_has_dc_aliases ? */
-+/* #define cpu_has_ic_fills_f_dc ? */
-+/* #define cpu_has_pindexed_dcache ? */
-+
-+/* #define cpu_icache_snoops_remote_store ? */
-+
-+#define cpu_has_mips32r1 1
-+
-+#if !defined(CONFIG_ATHEROS_AR5312)
-+# define cpu_has_mips32r2 1
-+#endif
-+
-+#define cpu_has_mips64r1 0
-+#define cpu_has_mips64r2 0
-+
-+#define cpu_has_dsp 0
-+#define cpu_has_mipsmt 0
-+
-+/* #define cpu_has_nofpuex ? */
-+#define cpu_has_64bits 0
-+#define cpu_has_64bit_zero_reg 0
-+#define cpu_has_64bit_gp_regs 0
-+#define cpu_has_64bit_addresses 0
-+
-+/* #define cpu_has_inclusive_pcaches ? */
-+
-+/* #define cpu_dcache_line_size() ? */
-+/* #define cpu_icache_line_size() ? */
-+
-+#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h
-@@ -0,0 +1,64 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
-+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ */
-+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
-+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
-+
-+#define PCI_DMA_OFFSET 0x20000000
-+
-+struct device;
-+
-+static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-+{
-+ return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
-+}
-+
-+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
-+{
-+ return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
-+}
-+
-+static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-+ dma_addr_t dma_addr)
-+{
-+ return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
-+}
-+
-+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-+ size_t size, enum dma_data_direction direction)
-+{
-+}
-+
-+static inline int plat_dma_supported(struct device *dev, u64 mask)
-+{
-+ return 1;
-+}
-+
-+static inline void plat_extra_sync_for_device(struct device *dev)
-+{
-+ return;
-+}
-+
-+static inline int plat_dma_mapping_error(struct device *dev,
-+ dma_addr_t dma_addr)
-+{
-+ return 0;
-+}
-+
-+static inline int plat_device_is_coherent(struct device *dev)
-+{
-+#ifdef CONFIG_DMA_COHERENT
-+ return 1;
-+#endif
-+#ifdef CONFIG_DMA_NONCOHERENT
-+ return 0;
-+#endif
-+}
-+
-+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/gpio.h
-@@ -0,0 +1,79 @@
-+#ifndef _ATHEROS_GPIO_H_
-+#define _ATHEROS_GPIO_H_
-+
-+#include <ar231x.h>
-+
-+struct ar231x_gpiodev {
-+ u32 valid_mask;
-+ u32 (*get_output)(void);
-+ u32 (*set_output)(u32 mask, u32 val);
-+ u32 (*get)(void);
-+ u32 (*set)(u32 mask, u32 val);
-+};
-+
-+extern const struct ar231x_gpiodev *ar231x_gpiodev;
-+
-+/*
-+ * Wrappers for the generic GPIO layer
-+ */
-+
-+static inline int gpio_direction_input(unsigned gpio) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return -ENXIO;
-+
-+ ar231x_gpiodev->set_output(mask, 0);
-+ return 0;
-+}
-+
-+static inline void gpio_set_value(unsigned gpio, int value) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return;
-+
-+ ar231x_gpiodev->set(mask, (!!value) * mask);
-+}
-+
-+static inline int gpio_direction_output(unsigned gpio, int value) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return -ENXIO;
-+
-+ ar231x_gpiodev->set_output(mask, mask);
-+ ar231x_gpiodev->set(mask, (!!value) * mask);
-+ return 0;
-+}
-+
-+/* Reads the gpio pin. Unchecked function */
-+static inline int gpio_get_value(unsigned gpio) {
-+ u32 mask = 1 << gpio;
-+
-+ if (!(ar231x_gpiodev->valid_mask & mask))
-+ return 0;
-+
-+ return !!(ar231x_gpiodev->get() & mask);
-+}
-+
-+static inline int gpio_request(unsigned gpio, const char *label) {
-+ return 0;
-+}
-+
-+static inline void gpio_free(unsigned gpio) {
-+}
-+
-+/* Returns IRQ to attach for gpio. Unchecked function */
-+static inline int gpio_to_irq(unsigned gpio) {
-+ return AR531X_GPIO_IRQ(gpio);
-+}
-+
-+/* Returns gpio for IRQ attached. Unchecked function */
-+static inline int irq_to_gpio(unsigned irq) {
-+ return (irq - (AR531X_GPIO_IRQ(0)));
-+}
-+
-+#include <asm-generic/gpio.h> /* cansleep wrappers */
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/reset.h
-@@ -0,0 +1,6 @@
-+#ifndef __AR531X_RESET_H
-+#define __AR531X_RESET_H
-+
-+void ar531x_disable_reset_button(void);
-+
-+#endif /* __AR531X_RESET_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/war.h
-@@ -0,0 +1,25 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
-+ */
-+#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
-+#define __ASM_MIPS_MACH_ATHEROS_WAR_H
-+
-+#define R4600_V1_INDEX_ICACHEOP_WAR 0
-+#define R4600_V1_HIT_CACHEOP_WAR 0
-+#define R4600_V2_HIT_CACHEOP_WAR 0
-+#define R5432_CP0_INTERRUPT_WAR 0
-+#define BCM1250_M3_WAR 0
-+#define SIBYTE_1956_WAR 0
-+#define MIPS4K_ICACHE_REFILL_WAR 0
-+#define MIPS_CACHE_SYNC_WAR 0
-+#define TX49XX_ICACHE_INDEX_INV_WAR 0
-+#define RM9000_CDEX_SMP_WAR 0
-+#define ICACHE_REFILLS_WORKAROUND_WAR 0
-+#define R10000_LLSC_WAR 0
-+#define MIPS34K_MISSED_ITLB_WAR 0
-+
-+#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
-@@ -0,0 +1,580 @@
-+/*
-+ * Register definitions for AR2315+
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef __AR2315_REG_H
-+#define __AR2315_REG_H
-+
-+/*
-+ * IRQs
-+ */
-+#define AR2315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR2315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR2315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR2315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-+#define AR2315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+
-+/*
-+ * Address map
-+ */
-+#define AR2315_SPI_READ 0x08000000 /* SPI FLASH */
-+#define AR2315_WLAN0 0xB0000000 /* Wireless MMR */
-+#define AR2315_PCI 0xB0100000 /* PCI MMR */
-+#define AR2315_SDRAMCTL 0xB0300000 /* SDRAM MMR */
-+#define AR2315_LOCAL 0xB0400000 /* LOCAL BUS MMR */
-+#define AR2315_ENET0 0xB0500000 /* ETHERNET MMR */
-+#define AR2315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */
-+#define AR2315_UART0 0xB1100003 /* UART MMR */
-+#define AR2315_SPI 0xB1300000 /* SPI FLASH MMR */
-+#define AR2315_PCIEXT 0x80000000 /* pci external */
-+
-+/*
-+ * Reset Register
-+ */
-+#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000)
-+
-+#define AR2315_RESET_COLD_AHB 0x00000001
-+#define AR2315_RESET_COLD_APB 0x00000002
-+#define AR2315_RESET_COLD_CPU 0x00000004
-+#define AR2315_RESET_COLD_CPUWARM 0x00000008
-+#define AR2315_RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */
-+#define AR2317_RESET_SYSTEM 0x00000010
-+
-+
-+#define AR2315_RESET (AR2315_DSLBASE + 0x0004)
-+
-+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
-+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */
-+#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
-+#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
-+#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */
-+#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */
-+#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
-+#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI interface */
-+#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */
-+#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */
-+#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
-+#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */
-+
-+/*
-+ * AHB master arbitration control
-+ */
-+#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008)
-+
-+#define AR2315_ARB_CPU 0x00000001 /* CPU, default */
-+#define AR2315_ARB_WLAN 0x00000002 /* WLAN */
-+#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
-+#define AR2315_ARB_LOCAL 0x00000008 /* LOCAL */
-+#define AR2315_ARB_PCI 0x00000010 /* PCI */
-+#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */
-+#define AR2315_ARB_RETRY 0x00000100 /* retry policy, debug only */
-+
-+/*
-+ * Config Register
-+ */
-+#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c)
-+
-+#define AR2315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */
-+#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
-+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
-+#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */
-+#define AR2315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */
-+#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
-+#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
-+
-+#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
-+#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */
-+#define AR2315_CONFIG_PCIAHB 0x00000800
-+#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
-+#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */
-+#define AR2315_CONFIG_CPU_DRAM 0x00010000
-+#define AR2315_CONFIG_CPU_PCI 0x00020000
-+#define AR2315_CONFIG_CPU_MMR 0x00040000
-+#define AR2315_CONFIG_BIG 0x00000400
-+
-+
-+/*
-+ * NMI control
-+ */
-+#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010)
-+
-+#define AR2315_NMI_EN 1
-+
-+/*
-+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
-+ */
-+#define AR2315_SREV (AR2315_DSLBASE + 0x0014)
-+
-+#define AR2315_REV_MAJ 0x00f0
-+#define AR2315_REV_MAJ_S 4
-+#define AR2315_REV_MIN 0x000f
-+#define AR2315_REV_MIN_S 0
-+#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN)
-+
-+/*
-+ * Interface Enable
-+ */
-+#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018)
-+
-+#define AR2315_IF_MASK 0x00000007
-+#define AR2315_IF_DISABLED 0
-+#define AR2315_IF_PCI 1
-+#define AR2315_IF_TS_LOCAL 2
-+#define AR2315_IF_ALL 3 /* only for emulation with separate pins */
-+#define AR2315_IF_LOCAL_HOST 0x00000008
-+#define AR2315_IF_PCI_HOST 0x00000010
-+#define AR2315_IF_PCI_INTR 0x00000020
-+#define AR2315_IF_PCI_CLK_MASK 0x00030000
-+#define AR2315_IF_PCI_CLK_INPUT 0
-+#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
-+#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
-+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
-+#define AR2315_IF_PCI_CLK_SHIFT 16
-+
-+/*
-+ * APB Interrupt control
-+ */
-+
-+#define AR2315_ISR (AR2315_DSLBASE + 0x0020)
-+#define AR2315_IMR (AR2315_DSLBASE + 0x0024)
-+#define AR2315_GISR (AR2315_DSLBASE + 0x0028)
-+
-+#define AR2315_ISR_UART0 0x0001 /* high speed UART */
-+#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */
-+#define AR2315_ISR_SPI 0x0004 /* SPI bus */
-+#define AR2315_ISR_AHB 0x0008 /* AHB error */
-+#define AR2315_ISR_APB 0x0010 /* APB error */
-+#define AR2315_ISR_TIMER 0x0020 /* timer */
-+#define AR2315_ISR_GPIO 0x0040 /* GPIO */
-+#define AR2315_ISR_WD 0x0080 /* watchdog */
-+#define AR2315_ISR_IR_RSVD 0x0100 /* IR */
-+
-+#define AR2315_GISR_MISC 0x0001
-+#define AR2315_GISR_WLAN0 0x0002
-+#define AR2315_GISR_MPEGTS_RSVD 0x0004
-+#define AR2315_GISR_LOCALPCI 0x0008
-+#define AR2315_GISR_WMACPOLL 0x0010
-+#define AR2315_GISR_TIMER 0x0020
-+#define AR2315_GISR_ETHERNET 0x0040
-+
-+/*
-+ * Interrupt routing from IO to the processor IP bits
-+ * Define our inter mask and level
-+ */
-+#define AR2315_INTR_MISCIO SR_IBIT3
-+#define AR2315_INTR_WLAN0 SR_IBIT4
-+#define AR2315_INTR_ENET0 SR_IBIT5
-+#define AR2315_INTR_LOCALPCI SR_IBIT6
-+#define AR2315_INTR_WMACPOLL SR_IBIT7
-+#define AR2315_INTR_COMPARE SR_IBIT8
-+
-+/*
-+ * Timers
-+ */
-+#define AR2315_TIMER (AR2315_DSLBASE + 0x0030)
-+#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034)
-+#define AR2315_WD (AR2315_DSLBASE + 0x0038)
-+#define AR2315_WDC (AR2315_DSLBASE + 0x003c)
-+
-+#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000
-+#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */
-+#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */
-+
-+/*
-+ * CPU Performance Counters
-+ */
-+#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048)
-+#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c)
-+
-+#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */
-+#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */
-+#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */
-+#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */
-+#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */
-+#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
-+#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
-+
-+#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */
-+#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */
-+#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
-+#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
-+#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */
-+#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */
-+#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */
-+
-+/*
-+ * AHB Error Reporting.
-+ */
-+#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */
-+#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */
-+#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */
-+#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */
-+#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */
-+
-+#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
-+ /* write 1 to clear all bits in ERR0 */
-+#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
-+#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
-+
-+#define AR2315_PROCERR_HMAST 0x0000000f
-+#define AR2315_PROCERR_HMAST_DFLT 0
-+#define AR2315_PROCERR_HMAST_WMAC 1
-+#define AR2315_PROCERR_HMAST_ENET 2
-+#define AR2315_PROCERR_HMAST_PCIENDPT 3
-+#define AR2315_PROCERR_HMAST_LOCAL 4
-+#define AR2315_PROCERR_HMAST_CPU 5
-+#define AR2315_PROCERR_HMAST_PCITGT 6
-+
-+#define AR2315_PROCERR_HMAST_S 0
-+#define AR2315_PROCERR_HWRITE 0x00000010
-+#define AR2315_PROCERR_HSIZE 0x00000060
-+#define AR2315_PROCERR_HSIZE_S 5
-+#define AR2315_PROCERR_HTRANS 0x00000180
-+#define AR2315_PROCERR_HTRANS_S 7
-+#define AR2315_PROCERR_HBURST 0x00000e00
-+#define AR2315_PROCERR_HBURST_S 9
-+
-+/*
-+ * Clock Control
-+ */
-+#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064)
-+#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068)
-+#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c)
-+#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070)
-+#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074)
-+#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080)
-+#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084)
-+
-+/* PLLc Control fields */
-+#define PLLC_REF_DIV_M 0x00000003
-+#define PLLC_REF_DIV_S 0
-+#define PLLC_FDBACK_DIV_M 0x0000007C
-+#define PLLC_FDBACK_DIV_S 2
-+#define PLLC_ADD_FDBACK_DIV_M 0x00000080
-+#define PLLC_ADD_FDBACK_DIV_S 7
-+#define PLLC_CLKC_DIV_M 0x0001c000
-+#define PLLC_CLKC_DIV_S 14
-+#define PLLC_CLKM_DIV_M 0x00700000
-+#define PLLC_CLKM_DIV_S 20
-+
-+/* CPU CLK Control fields */
-+#define CPUCLK_CLK_SEL_M 0x00000003
-+#define CPUCLK_CLK_SEL_S 0
-+#define CPUCLK_CLK_DIV_M 0x0000000c
-+#define CPUCLK_CLK_DIV_S 2
-+
-+/* AMBA CLK Control fields */
-+#define AMBACLK_CLK_SEL_M 0x00000003
-+#define AMBACLK_CLK_SEL_S 0
-+#define AMBACLK_CLK_DIV_M 0x0000000c
-+#define AMBACLK_CLK_DIV_S 2
-+
-+/*
-+ * GPIO
-+ */
-+#define AR2315_GPIO_DI (AR2315_DSLBASE + 0x0088)
-+#define AR2315_GPIO_DO (AR2315_DSLBASE + 0x0090)
-+#define AR2315_GPIO_CR (AR2315_DSLBASE + 0x0098)
-+#define AR2315_GPIO_INT (AR2315_DSLBASE + 0x00a0)
-+
-+#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
-+#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */
-+#define AR2315_GPIO_CR_I(x) (0) /* input */
-+
-+#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */
-+#define AR2315_GPIO_INT_M (0x3F) /* mask for int */
-+#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */
-+#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */
-+
-+#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */
-+#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */
-+#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */
-+#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */
-+#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */
-+
-+#define AR2315_RESET_GPIO 5
-+#define AR2315_NUM_GPIO 22
-+
-+/*
-+ * PCI Clock Control
-+ */
-+#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4)
-+
-+#define AR2315_PCICLK_INPUT_M 0x3
-+#define AR2315_PCICLK_INPUT_S 0
-+
-+#define AR2315_PCICLK_PLLC_CLKM 0
-+#define AR2315_PCICLK_PLLC_CLKM1 1
-+#define AR2315_PCICLK_PLLC_CLKC 2
-+#define AR2315_PCICLK_REF_CLK 3
-+
-+#define AR2315_PCICLK_DIV_M 0xc
-+#define AR2315_PCICLK_DIV_S 2
-+
-+#define AR2315_PCICLK_IN_FREQ 0
-+#define AR2315_PCICLK_IN_FREQ_DIV_6 1
-+#define AR2315_PCICLK_IN_FREQ_DIV_8 2
-+#define AR2315_PCICLK_IN_FREQ_DIV_10 3
-+
-+/*
-+ * Observation Control Register
-+ */
-+#define AR2315_OCR (AR2315_DSLBASE + 0x00b0)
-+#define OCR_GPIO0_IRIN 0x0040
-+#define OCR_GPIO1_IROUT 0x0080
-+#define OCR_GPIO3_RXCLR 0x0200
-+
-+/*
-+ * General Clock Control
-+ */
-+
-+#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4)
-+#define MISCCLK_PLLBYPASS_EN 0x00000001
-+#define MISCCLK_PROCREFCLK 0x00000002
-+
-+/*
-+ * SDRAM Controller
-+ * - No read or write buffers are included.
-+ */
-+#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00)
-+#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c)
-+#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10)
-+
-+#define SDRAM_DATA_WIDTH_M 0x00006000
-+#define SDRAM_DATA_WIDTH_S 13
-+
-+#define SDRAM_COL_WIDTH_M 0x00001E00
-+#define SDRAM_COL_WIDTH_S 9
-+
-+#define SDRAM_ROW_WIDTH_M 0x000001E0
-+#define SDRAM_ROW_WIDTH_S 5
-+
-+#define SDRAM_BANKADDR_BITS_M 0x00000018
-+#define SDRAM_BANKADDR_BITS_S 3
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+
-+#define AR2315_SPI_CTL (AR2315_SPI + 0x00)
-+#define AR2315_SPI_OPCODE (AR2315_SPI + 0x04)
-+#define AR2315_SPI_DATA (AR2315_SPI + 0x08)
-+
-+#define SPI_CTL_START 0x00000100
-+#define SPI_CTL_BUSY 0x00010000
-+#define SPI_CTL_TXCNT_MASK 0x0000000f
-+#define SPI_CTL_RXCNT_MASK 0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
-+#define SPI_CTL_SIZE_MASK 0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK 0x03000000
-+#define SPI_OPCODE_MASK 0x000000ff
-+
-+/*
-+ * PCI Bus Interface Registers
-+ */
-+#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008)
-+#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c)
-+#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
-+#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
-+#define AR2315_PCIMISC_RST_MODE 0x00000030
-+#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
-+#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
-+#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
-+#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
-+#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
-+#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
-+#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
-+#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */
-+
-+#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010)
-+
-+#define AR2315_PCI_UNCACHE_CFG (AR2315_PCI + 0x0014)
-+
-+#define AR2315_PCI_IN_EN (AR2315_PCI + 0x0100)
-+#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */
-+#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */
-+#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */
-+#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */
-+
-+#define AR2315_PCI_IN_DIS (AR2315_PCI + 0x0104)
-+#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
-+#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
-+#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
-+#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
-+
-+#define AR2315_PCI_IN_PTR (AR2315_PCI + 0x0200)
-+
-+#define AR2315_PCI_OUT_EN (AR2315_PCI + 0x0400)
-+#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
-+
-+#define AR2315_PCI_OUT_DIS (AR2315_PCI + 0x0404)
-+#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
-+
-+#define AR2315_PCI_OUT_PTR (AR2315_PCI + 0x0408)
-+
-+#define AR2315_PCI_INT_STATUS (AR2315_PCI + 0x0500) /* write one to clr */
-+#define AR2315_PCI_TXINT 0x00000001 /* Desc In Completed */
-+#define AR2315_PCI_TXOK 0x00000002 /* Desc In OK */
-+#define AR2315_PCI_TXERR 0x00000004 /* Desc In ERR */
-+#define AR2315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */
-+#define AR2315_PCI_RXINT 0x00000010 /* Desc Out Completed */
-+#define AR2315_PCI_RXOK 0x00000020 /* Desc Out OK */
-+#define AR2315_PCI_RXERR 0x00000040 /* Desc Out ERR */
-+#define AR2315_PCI_RXEOL 0x00000080 /* Desc Out EOL */
-+#define AR2315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */
-+#define AR2315_PCI_MASK 0x0000FFFF /* Desc Mask */
-+#define AR2315_PCI_EXT_INT 0x02000000
-+#define AR2315_PCI_ABORT_INT 0x04000000
-+
-+#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */
-+
-+#define AR2315_PCI_INTEN_REG (AR2315_PCI + 0x0508)
-+#define AR2315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */
-+#define AR2315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */
-+
-+#define AR2315_PCI_HOST_IN_EN (AR2315_PCI + 0x0800)
-+#define AR2315_PCI_HOST_IN_DIS (AR2315_PCI + 0x0804)
-+#define AR2315_PCI_HOST_IN_PTR (AR2315_PCI + 0x0810)
-+#define AR2315_PCI_HOST_OUT_EN (AR2315_PCI + 0x0900)
-+#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904)
-+#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908)
-+
-+
-+/*
-+ * Local Bus Interface Registers
-+ */
-+#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000)
-+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
-+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
-+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
-+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
-+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
-+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
-+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
-+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
-+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
-+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
-+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
-+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
-+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
-+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
-+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
-+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
-+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
-+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
-+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
-+#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
-+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
-+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
-+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
-+
-+#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004)
-+#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */
-+
-+#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008)
-+#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C)
-+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
-+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
-+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
-+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
-+#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80
-+#define AR2315_LBM_TIMEOUT_SHFT 7
-+#define AR2315_LBM_PORTMUX 0x07000000
-+
-+
-+#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010)
-+
-+#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100)
-+#define AR2315_LB_TXEN_0 0x01
-+#define AR2315_LB_TXEN_1 0x02
-+#define AR2315_LB_TXEN_2 0x04
-+#define AR2315_LB_TXEN_3 0x08
-+
-+#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104)
-+#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200)
-+
-+#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400)
-+#define AR2315_LB_RXEN 0x01
-+
-+#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404)
-+#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408)
-+
-+#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500)
-+#define AR2315_INT_TX_DESC 0x0001
-+#define AR2315_INT_TX_OK 0x0002
-+#define AR2315_INT_TX_ERR 0x0004
-+#define AR2315_INT_TX_EOF 0x0008
-+#define AR2315_INT_RX_DESC 0x0010
-+#define AR2315_INT_RX_OK 0x0020
-+#define AR2315_INT_RX_ERR 0x0040
-+#define AR2315_INT_RX_EOF 0x0080
-+#define AR2315_INT_TX_TRUNC 0x0100
-+#define AR2315_INT_TX_STARVE 0x0200
-+#define AR2315_INT_LB_TIMEOUT 0x0400
-+#define AR2315_INT_LB_ERR 0x0800
-+#define AR2315_INT_MBOX_WR 0x1000
-+#define AR2315_INT_MBOX_RD 0x2000
-+
-+/* Bit definitions for INT MASK are the same as INT_STATUS */
-+#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504)
-+
-+#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508)
-+#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600)
-+
-+/*
-+ * IR Interface Registers
-+ */
-+#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000)
-+
-+#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */
-+
-+#define AR2315_IR_CONTROL (AR2315_IR + 0x0800)
-+#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */
-+#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */
-+#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */
-+#define AR2315_IRCTL_SAMPLECLK_SHFT 1
-+#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */
-+#define AR2315_IRCTL_OUTPUTCLK_SHFT 14
-+
-+#define AR2315_IR_STATUS (AR2315_IR + 0x0804)
-+#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */
-+#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */
-+
-+#define AR2315_IR_CONFIG (AR2315_IR + 0x0808)
-+#define AR2315_IRCFG_INVIN 0x00000001 /* invert input polarity */
-+#define AR2315_IRCFG_INVOUT 0x00000002 /* invert output polarity */
-+#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
-+#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */
-+#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */
-+#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */
-+#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */
-+#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */
-+#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */
-+
-+#define HOST_PCI_DEV_ID 3
-+#define HOST_PCI_MBAR0 0x10000000
-+#define HOST_PCI_MBAR1 0x20000000
-+#define HOST_PCI_MBAR2 0x30000000
-+
-+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
-+#define PCI_DEVICE_MEM_SPACE 0x800000
-+
-+#endif /* __AR2315_REG_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
-@@ -0,0 +1,236 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef AR5312_H
-+#define AR5312_H
-+
-+#include <asm/addrspace.h>
-+
-+/*
-+ * IRQs
-+ */
-+
-+#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
-+#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
-+#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
-+#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
-+#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
-+
-+
-+/* Address Map */
-+#define AR531X_WLAN0 0x18000000
-+#define AR531X_WLAN1 0x18500000
-+#define AR531X_ENET0 0x18100000
-+#define AR531X_ENET1 0x18200000
-+#define AR531X_SDRAMCTL 0x18300000
-+#define AR531X_FLASHCTL 0x18400000
-+#define AR531X_APBBASE 0x1c000000
-+#define AR531X_FLASH 0x1e000000
-+#define AR531X_UART0 0xbc000003 /* UART MMR */
-+
-+/*
-+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
-+ * should be considered available. The AR5312 supports 2 enet MACS,
-+ * even though many reference boards only actually use 1 of them
-+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
-+ * The AR2312 supports 1 enet MAC.
-+ */
-+#define AR531X_NUM_ENET_MAC 2
-+
-+/*
-+ * Need these defines to determine true number of ethernet MACs
-+ */
-+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
-+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
-+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
-+#define AR531X_RADIO_MASK_OFF 0xc8
-+#define AR531X_RADIO0_MASK 0x0003
-+#define AR531X_RADIO1_MASK 0x000c
-+#define AR531X_RADIO1_S 2
-+
-+/*
-+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
-+ * should be considered available.
-+ */
-+#define AR531X_NUM_WMAC 2
-+
-+/* Reset/Timer Block Address Map */
-+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000)
-+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */
-+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
-+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */
-+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
-+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
-+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
-+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064)
-+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c)
-+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070)
-+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074)
-+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078)
-+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c)
-+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */
-+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */
-+
-+/* AR531X_WD_CTRL register bit field definitions */
-+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
-+#define AR531X_WD_CTRL_NMI 0x0001
-+#define AR531X_WD_CTRL_RESET 0x0002
-+
-+/* AR531X_ISR register bit field definitions */
-+#define AR531X_ISR_NONE 0x0000
-+#define AR531X_ISR_TIMER 0x0001
-+#define AR531X_ISR_AHBPROC 0x0002
-+#define AR531X_ISR_AHBDMA 0x0004
-+#define AR531X_ISR_GPIO 0x0008
-+#define AR531X_ISR_UART0 0x0010
-+#define AR531X_ISR_UART0DMA 0x0020
-+#define AR531X_ISR_WD 0x0040
-+#define AR531X_ISR_LOCAL 0x0080
-+
-+/* AR531X_RESET register bit field definitions */
-+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */
-+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */
-+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
-+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
-+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
-+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
-+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
-+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
-+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
-+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
-+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
-+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
-+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
-+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */
-+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
-+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
-+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
-+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */
-+
-+#define AR531X_RESET_WMAC0_BITS \
-+ AR531X_RESET_WLAN0 |\
-+ AR531X_RESET_WARM_WLAN0_MAC |\
-+ AR531X_RESET_WARM_WLAN0_BB
-+
-+#define AR531X_RESERT_WMAC1_BITS \
-+ AR531X_RESET_WLAN1 |\
-+ AR531X_RESET_WARM_WLAN1_MAC |\
-+ AR531X_RESET_WARM_WLAN1_BB
-+
-+/* AR5312_CLOCKCTL1 register bit field definitions */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-+
-+/* Valid for AR5312 and AR2312 */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-+
-+/* Valid for AR2313 */
-+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
-+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
-+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
-+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
-+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
-+
-+
-+/* AR531X_ENABLE register bit field definitions */
-+#define AR531X_ENABLE_WLAN0 0x0001
-+#define AR531X_ENABLE_ENET0 0x0002
-+#define AR531X_ENABLE_ENET1 0x0004
-+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
-+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
-+#define AR531X_ENABLE_WLAN1 \
-+ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
-+
-+/* AR531X_REV register bit field definitions */
-+#define AR531X_REV_WMAC_MAJ 0xf000
-+#define AR531X_REV_WMAC_MAJ_S 12
-+#define AR531X_REV_WMAC_MIN 0x0f00
-+#define AR531X_REV_WMAC_MIN_S 8
-+#define AR531X_REV_MAJ 0x00f0
-+#define AR531X_REV_MAJ_S 4
-+#define AR531X_REV_MIN 0x000f
-+#define AR531X_REV_MIN_S 0
-+#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN)
-+
-+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define AR531X_REV_MAJ_AR5312 0x4
-+#define AR531X_REV_MAJ_AR2313 0x5
-+
-+/* Minor revision numbers, bits 3..0 of Revision ID register */
-+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
-+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
-+
-+/* AR531X_FLASHCTL register bit field definitions */
-+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
-+#define FLASHCTL_IDCY_S 0
-+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
-+#define FLASHCTL_WST1_S 5
-+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
-+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
-+#define FLASHCTL_WST2_S 11
-+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
-+#define FLASHCTL_AC_S 16
-+#define FLASHCTL_AC_128K 0x00000000
-+#define FLASHCTL_AC_256K 0x00010000
-+#define FLASHCTL_AC_512K 0x00020000
-+#define FLASHCTL_AC_1M 0x00030000
-+#define FLASHCTL_AC_2M 0x00040000
-+#define FLASHCTL_AC_4M 0x00050000
-+#define FLASHCTL_AC_8M 0x00060000
-+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
-+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
-+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
-+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
-+#define FLASHCTL_WP 0x04000000 /* Write protect */
-+#define FLASHCTL_BM 0x08000000 /* Burst mode */
-+#define FLASHCTL_MW 0x30000000 /* Memory width */
-+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
-+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
-+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
-+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
-+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
-+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
-+
-+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
-+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00)
-+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04)
-+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08)
-+
-+/* ARM SDRAM Controller -- just enough to determine memory size */
-+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
-+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
-+#define MEM_CFG1_AC0_S 8
-+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
-+#define MEM_CFG1_AC1_S 12
-+
-+/* GPIO Address Map */
-+#define AR531X_GPIO (AR531X_APBBASE + 0x2000)
-+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */
-+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */
-+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */
-+
-+/* GPIO Control Register bit field definitions */
-+#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
-+#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */
-+#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */
-+#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
-+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
-+#define AR531X_NUM_GPIO 8
-+
-+
-+#endif
-+
---- /dev/null
-+++ b/arch/mips/ar231x/ar5312.c
-@@ -0,0 +1,549 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Platform devices for Atheros SoCs
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/leds.h>
-+#include <asm/bootinfo.h>
-+#include <asm/reboot.h>
-+#include <asm/time.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <gpio.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar5312_regs.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+
-+static void
-+ar5312_misc_irq_dispatch(void)
-+{
-+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR);
-+
-+ if (ar231x_misc_intrs & AR531X_ISR_TIMER) {
-+ do_IRQ(AR531X_MISC_IRQ_TIMER);
-+ (void)ar231x_read_reg(AR531X_TIMER);
-+ } else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC)
-+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-+ else if ((ar231x_misc_intrs & AR531X_ISR_UART0))
-+ do_IRQ(AR531X_MISC_IRQ_UART0);
-+ else if (ar231x_misc_intrs & AR531X_ISR_WD)
-+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-+ else
-+ do_IRQ(AR531X_MISC_IRQ_NONE);
-+}
-+
-+static asmlinkage void
-+ar5312_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP2)
-+ do_IRQ(AR5312_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP3)
-+ do_IRQ(AR5312_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR5312_IRQ_ENET1_INTRS);
-+ else if (pending & CAUSEF_IP5)
-+ do_IRQ(AR5312_IRQ_WLAN1_INTRS);
-+ else if (pending & CAUSEF_IP6)
-+ ar5312_misc_irq_dispatch();
-+ else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
-+}
-+
-+
-+/* Enable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar5312_misc_intr_enable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR531X_IMR);
-+ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-+ ar231x_write_reg(AR531X_IMR, imr);
-+}
-+
-+/* Disable the specified AR531X_MISC_IRQ interrupt */
-+static void
-+ar5312_misc_intr_disable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR531X_IMR);
-+ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
-+ ar231x_write_reg(AR531X_IMR, imr);
-+ ar231x_read_reg(AR531X_IMR); /* flush write buffer */
-+}
-+
-+static void
-+ar5312_misc_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar5312_misc_intr_enable(irq);
-+}
-+
-+static struct irq_chip ar5312_misc_intr_controller = {
-+ .name = "AR5312-MISC",
-+ .disable = ar5312_misc_intr_disable,
-+ .ack = ar5312_misc_intr_disable,
-+ .mask_ack = ar5312_misc_intr_disable,
-+ .mask = ar5312_misc_intr_disable,
-+ .unmask = ar5312_misc_intr_enable,
-+ .end = ar5312_misc_intr_end,
-+};
-+
-+
-+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ u32 proc1 = ar231x_read_reg(AR531X_PROC1);
-+ u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */
-+ u32 dma1 = ar231x_read_reg(AR531X_DMA1);
-+ u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR); /* clears error state */
-+
-+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
-+ procAddr, proc1, dmaAddr, dma1);
-+
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static struct irqaction ar5312_ahb_proc_interrupt = {
-+ .handler = ar5312_ahb_proc_handler,
-+ .flags = IRQF_DISABLED,
-+ .name = "ar5312_ahb_proc_interrupt",
-+};
-+
-+
-+static struct irqaction cascade = {
-+ .handler = no_action,
-+ .flags = IRQF_DISABLED,
-+ .name = "cascade",
-+};
-+
-+void __init ar5312_irq_init(void)
-+{
-+ int i;
-+
-+ if (!is_5312())
-+ return;
-+
-+ ar231x_irq_dispatch = ar5312_irq_dispatch;
-+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
-+ int irq = AR531X_MISC_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar5312_misc_intr_controller,
-+ handle_level_irq);
-+ }
-+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
-+ setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
-+}
-+
-+const struct ar231x_gpiodev ar5312_gpiodev;
-+
-+static u32
-+ar5312_gpio_get_output(void)
-+{
-+ u32 reg;
-+ reg = ~(ar231x_read_reg(AR531X_GPIO_CR));
-+ reg &= ar5312_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_set_output(u32 mask, u32 val)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR531X_GPIO_CR);
-+ reg |= mask;
-+ reg &= ~val;
-+ ar231x_write_reg(AR531X_GPIO_CR, reg);
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_get(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR531X_GPIO_DI);
-+ reg &= ar5312_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar5312_gpio_set(u32 mask, u32 value)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR531X_GPIO_DO);
-+ reg &= ~mask;
-+ reg |= value;
-+ ar231x_write_reg(AR531X_GPIO_DO, reg);
-+ return reg;
-+}
-+
-+const struct ar231x_gpiodev ar5312_gpiodev = {
-+ .valid_mask = (1 << 8) - 1,
-+ .get_output = ar5312_gpio_get_output,
-+ .set_output = ar5312_gpio_set_output,
-+ .get = ar5312_gpio_get,
-+ .set = ar5312_gpio_set,
-+};
-+
-+static struct physmap_flash_data ar5312_flash_data = {
-+ .width = 2,
-+};
-+
-+static struct resource ar5312_flash_resource = {
-+ .start = AR531X_FLASH,
-+ .end = AR531X_FLASH + 0x800000 - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct ar231x_eth ar5312_eth0_data = {
-+ .reset_base = AR531X_RESET,
-+ .reset_mac = AR531X_RESET_ENET0,
-+ .reset_phy = AR531X_RESET_EPHY0,
-+ .phy_base = KSEG1ADDR(AR531X_ENET0),
-+ .config = &ar231x_board,
-+};
-+
-+static struct ar231x_eth ar5312_eth1_data = {
-+ .reset_base = AR531X_RESET,
-+ .reset_mac = AR531X_RESET_ENET1,
-+ .reset_phy = AR531X_RESET_EPHY1,
-+ .phy_base = KSEG1ADDR(AR531X_ENET1),
-+ .config = &ar231x_board,
-+};
-+
-+static struct platform_device ar5312_physmap_flash = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .dev.platform_data = &ar5312_flash_data,
-+ .resource = &ar5312_flash_resource,
-+ .num_resources = 1,
-+};
-+
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar5312_leds[] = {
-+ { .name = "wlan", .gpio = 0, .active_low = 1, },
-+};
-+
-+static const struct gpio_led_platform_data ar5312_led_data = {
-+ .num_leds = ARRAY_SIZE(ar5312_leds),
-+ .leds = (void *) ar5312_leds,
-+};
-+
-+static struct platform_device ar5312_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = (void *) &ar5312_led_data,
-+};
-+#endif
-+
-+/*
-+ * NB: This mapping size is larger than the actual flash size,
-+ * but this shouldn't be a problem here, because the flash
-+ * will simply be mapped multiple times.
-+ */
-+static char __init *ar5312_flash_limit(void)
-+{
-+ u32 ctl;
-+ /*
-+ * Configure flash bank 0.
-+ * Assume 8M window size. Flash will be aliased if it's smaller
-+ */
-+ ctl = FLASHCTL_E |
-+ FLASHCTL_AC_8M |
-+ FLASHCTL_RBLE |
-+ (0x01 << FLASHCTL_IDCY_S) |
-+ (0x07 << FLASHCTL_WST1_S) |
-+ (0x07 << FLASHCTL_WST2_S) |
-+ (ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW);
-+
-+ ar231x_write_reg(AR531X_FLASHCTL0, ctl);
-+
-+ /* Disable other flash banks */
-+ ar231x_write_reg(AR531X_FLASHCTL1,
-+ ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+ ar231x_write_reg(AR531X_FLASHCTL2,
-+ ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
-+}
-+
-+int __init ar5312_init_devices(void)
-+{
-+ struct ar231x_boarddata *config;
-+ u32 fctl = 0;
-+ const u8 *radio;
-+ u8 *c;
-+
-+ if (!is_5312())
-+ return 0;
-+
-+ /* Locate board/radio config data */
-+ ar231x_find_config(ar5312_flash_limit());
-+ config = ar231x_board.config;
-+
-+
-+ /*
-+ * Chip IDs and hardware detection for some Atheros
-+ * models are really broken!
-+ *
-+ * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
-+ * as indication for AR2312, which is otherwise
-+ * indistinguishable from the real AR5312.
-+ */
-+ if (ar231x_board.radio) {
-+ radio = ar231x_board.radio + AR531X_RADIO_MASK_OFF;
-+ if ((*((const u32 *) radio) & AR531X_RADIO0_MASK) == 0)
-+ config->flags |= BD_ISCASPER;
-+ } else
-+ radio = NULL;
-+
-+ /* AR2313 has CPU minor rev. 10 */
-+ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
-+ ar231x_devtype = DEV_TYPE_AR2313;
-+
-+ /* AR2312 shares the same Silicon ID as AR5312 */
-+ else if (config->flags & BD_ISCASPER)
-+ ar231x_devtype = DEV_TYPE_AR2312;
-+
-+ /* Everything else is probably AR5312 or compatible */
-+ else
-+ ar231x_devtype = DEV_TYPE_AR5312;
-+
-+ /* fixup flash width */
-+ fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW;
-+ switch (fctl) {
-+ case FLASHCTL_MWx16:
-+ ar5312_flash_data.width = 2;
-+ break;
-+ case FLASHCTL_MWx8:
-+ default:
-+ ar5312_flash_data.width = 1;
-+ break;
-+ }
-+
-+ platform_device_register(&ar5312_physmap_flash);
-+
-+#ifdef CONFIG_LEDS_GPIO
-+ ar5312_leds[0].gpio = config->sysLedGpio;
-+ platform_device_register(&ar5312_gpio_leds);
-+#endif
-+
-+ /* Fix up MAC addresses if necessary */
-+ if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6))
-+ memcpy(config->enet0_mac, config->enet1_mac, 6);
-+
-+ /* If ENET0 and ENET1 have the same mac address,
-+ * increment the one from ENET1 */
-+ if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) {
-+ c = config->enet1_mac + 5;
-+ while ((c >= config->enet1_mac) && !(++(*c)))
-+ c--;
-+ }
-+
-+ switch(ar231x_devtype) {
-+ case DEV_TYPE_AR5312:
-+ ar5312_eth0_data.macaddr = config->enet0_mac;
-+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0),
-+ AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data);
-+
-+ ar5312_eth1_data.macaddr = config->enet1_mac;
-+ ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1),
-+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
-+
-+ if (!ar231x_board.radio)
-+ return 0;
-+
-+ if ((*((u32 *) radio) & AR531X_RADIO0_MASK) &&
-+ (config->flags & BD_WLAN0))
-+ ar231x_add_wmac(0, AR531X_WLAN0,
-+ AR5312_IRQ_WLAN0_INTRS);
-+
-+ break;
-+ /*
-+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
-+ * of ENET1. Atheros calls it 'twisted' for a reason :)
-+ */
-+ case DEV_TYPE_AR2312:
-+ case DEV_TYPE_AR2313:
-+ ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base;
-+ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
-+ ar5312_eth1_data.macaddr = config->enet0_mac;
-+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1),
-+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data);
-+
-+ if (!ar231x_board.radio)
-+ return 0;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ if ((*((u32 *) radio) & AR531X_RADIO1_MASK) &&
-+ (config->flags & BD_WLAN1))
-+ ar231x_add_wmac(1, AR531X_WLAN1,
-+ AR5312_IRQ_WLAN1_INTRS);
-+
-+ return 0;
-+}
-+
-+
-+static void ar5312_restart(char *command)
-+{
-+ /* reset the system */
-+ local_irq_disable();
-+ while(1) {
-+ ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM);
-+ }
-+}
-+
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
-+
-+
-+static int __init
-+ar5312_cpu_frequency(void)
-+{
-+ unsigned int result;
-+ unsigned int predivide_mask, predivide_shift;
-+ unsigned int multiplier_mask, multiplier_shift;
-+ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
-+ unsigned int doubler_mask;
-+ u16 devid;
-+
-+ /* Trust the bootrom's idea of cpu frequency. */
-+ if ((result = ar231x_read_reg(AR5312_SCRATCH)))
-+ return result;
-+
-+ devid = ar231x_read_reg(AR531X_REV);
-+ devid &= AR531X_REV_MAJ;
-+ devid >>= AR531X_REV_MAJ_S;
-+ if (devid == AR531X_REV_MAJ_AR2313) {
-+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
-+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
-+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
-+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
-+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
-+ } else { /* AR5312 and AR2312 */
-+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
-+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
-+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
-+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
-+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
-+ }
-+
-+ /*
-+ * Clocking is derived from a fixed 40MHz input clock.
-+ *
-+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
-+ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
-+ * flash, Timer, Watchdog Timer)
-+ *
-+ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
-+ *
-+ * So, for example, with a PLL multiplier of 5, we have
-+ *
-+ * cpuFreq = 200MHz
-+ * sysFreq = 50MHz
-+ * cntFreq = 100MHz
-+ *
-+ * We compute the CPU frequency, based on PLL settings.
-+ */
-+
-+ clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1);
-+ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
-+ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
-+ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
-+
-+ if (clockCtl1 & doubler_mask) {
-+ multiplier = multiplier << 1;
-+ }
-+ return (40000000 / preDivisor) * multiplier;
-+}
-+
-+static inline int
-+ar5312_sys_frequency(void)
-+{
-+ return ar5312_cpu_frequency() / 4;
-+}
-+
-+void __init
-+ar5312_time_init(void)
-+{
-+ if (!is_5312())
-+ return;
-+
-+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
-+}
-+
-+
-+void __init
-+ar5312_prom_init(void)
-+{
-+ u32 memsize, memcfg, bank0AC, bank1AC;
-+ u32 devid;
-+
-+ if (!is_5312())
-+ return;
-+
-+ /* Detect memory size */
-+ memcfg = ar231x_read_reg(AR531X_MEM_CFG1);
-+ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
-+ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
-+ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
-+ + (bank1AC ? (1 << (bank1AC+1)) : 0);
-+ memsize <<= 20;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ devid = ar231x_read_reg(AR531X_REV);
-+ devid >>= AR531X_REV_WMAC_MIN_S;
-+ devid &= AR531X_REV_CHIP;
-+ ar231x_board.devid = (u16) devid;
-+ ar231x_gpiodev = &ar5312_gpiodev;
-+}
-+
-+void __init
-+ar5312_plat_setup(void)
-+{
-+ if (!is_5312())
-+ return;
-+
-+ /* Clear any lingering AHB errors */
-+ ar231x_read_reg(AR531X_PROCADDR);
-+ ar231x_read_reg(AR531X_DMAADDR);
-+ ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
-+
-+ _machine_restart = ar5312_restart;
-+ ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
-+}
-+
---- /dev/null
-+++ b/arch/mips/ar231x/ar2315.c
-@@ -0,0 +1,658 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Platform devices for Atheros SoCs
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/delay.h>
-+#include <linux/leds.h>
-+#include <asm/bootinfo.h>
-+#include <asm/reboot.h>
-+#include <asm/time.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <asm/gpio.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar2315_regs.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar2315.h"
-+
-+static u32 gpiointmask = 0, gpiointval = 0;
-+
-+static inline void ar2315_gpio_irq(void)
-+{
-+ u32 pend;
-+ int bit = -1;
-+
-+ /* only do one gpio interrupt at a time */
-+ pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask;
-+
-+ if (pend) {
-+ bit = fls(pend) - 1;
-+ pend &= ~(1 << bit);
-+ gpiointval ^= (1 << bit);
-+ }
-+
-+ if (!pend)
-+ ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO);
-+
-+ /* Enable interrupt with edge detection */
-+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(bit)) != AR2315_GPIO_CR_I(bit))
-+ return;
-+
-+ if (bit >= 0)
-+ do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
-+}
-+
-+
-+/*
-+ * Called when an interrupt is received, this function
-+ * determines exactly which interrupt it was, and it
-+ * invokes the appropriate handler.
-+ *
-+ * Implicitly, we also define interrupt priority by
-+ * choosing which to dispatch first.
-+ */
-+static asmlinkage void
-+ar2315_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP3)
-+ do_IRQ(AR2315_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR2315_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP2) {
-+ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
-+
-+ if (misc_intr & AR2315_ISR_SPI)
-+ do_IRQ(AR531X_MISC_IRQ_SPI);
-+ else if (misc_intr & AR2315_ISR_TIMER)
-+ do_IRQ(AR531X_MISC_IRQ_TIMER);
-+ else if (misc_intr & AR2315_ISR_AHB)
-+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
-+ else if (misc_intr & AR2315_ISR_GPIO)
-+ ar2315_gpio_irq();
-+ else if (misc_intr & AR2315_ISR_UART0)
-+ do_IRQ(AR531X_MISC_IRQ_UART0);
-+ else if (misc_intr & AR2315_ISR_WD)
-+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
-+ else
-+ do_IRQ(AR531X_MISC_IRQ_NONE);
-+ } else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR531X_IRQ_CPU_CLOCK);
-+}
-+
-+static void ar2315_set_gpiointmask(int gpio, int level)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR2315_GPIO_INT);
-+ reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M);
-+ reg |= gpio | AR2315_GPIO_INT_LVL(level);
-+ ar231x_write_reg(AR2315_GPIO_INT, reg);
-+}
-+
-+static void ar2315_gpio_intr_enable(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* Enable interrupt with edge detection */
-+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(gpio)) != AR2315_GPIO_CR_I(gpio))
-+ return;
-+
-+ gpiointmask |= (1 << gpio);
-+ ar2315_set_gpiointmask(gpio, 3);
-+}
-+
-+static unsigned int ar2315_gpio_intr_startup(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* reconfigure GPIO line as input */
-+ ar231x_mask_reg(AR2315_GPIO_CR, AR2315_GPIO_CR_M(gpio), AR2315_GPIO_CR_I(gpio));
-+ ar2315_gpio_intr_enable(irq);
-+ return 0;
-+}
-+
-+static void ar2315_gpio_intr_disable(unsigned int irq)
-+{
-+ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE;
-+
-+ /* Disable interrupt */
-+ gpiointmask &= ~(1 << gpio);
-+ ar2315_set_gpiointmask(gpio, 0);
-+}
-+
-+static void
-+ar2315_gpio_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar2315_gpio_intr_enable(irq);
-+}
-+
-+static struct irq_chip ar2315_gpio_intr_controller = {
-+ .typename = "AR2315-GPIO",
-+ .startup = ar2315_gpio_intr_startup,
-+ .ack = ar2315_gpio_intr_disable,
-+ .mask_ack = ar2315_gpio_intr_disable,
-+ .mask = ar2315_gpio_intr_disable,
-+ .unmask = ar2315_gpio_intr_enable,
-+ .end = ar2315_gpio_intr_end,
-+};
-+
-+static void
-+ar2315_misc_intr_enable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR2315_IMR);
-+ switch(irq) {
-+ case AR531X_MISC_IRQ_SPI:
-+ imr |= AR2315_ISR_SPI;
-+ break;
-+ case AR531X_MISC_IRQ_TIMER:
-+ imr |= AR2315_ISR_TIMER;
-+ break;
-+ case AR531X_MISC_IRQ_AHB_PROC:
-+ imr |= AR2315_ISR_AHB;
-+ break;
-+ case AR531X_MISC_IRQ_GPIO:
-+ imr |= AR2315_ISR_GPIO;
-+ break;
-+ case AR531X_MISC_IRQ_UART0:
-+ imr |= AR2315_ISR_UART0;
-+ break;
-+ case AR531X_MISC_IRQ_WATCHDOG:
-+ imr |= AR2315_ISR_WD;
-+ break;
-+ default:
-+ break;
-+ }
-+ ar231x_write_reg(AR2315_IMR, imr);
-+}
-+
-+static void
-+ar2315_misc_intr_disable(unsigned int irq)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR2315_IMR);
-+ switch(irq) {
-+ case AR531X_MISC_IRQ_SPI:
-+ imr &= ~AR2315_ISR_SPI;
-+ break;
-+ case AR531X_MISC_IRQ_TIMER:
-+ imr &= ~AR2315_ISR_TIMER;
-+ break;
-+ case AR531X_MISC_IRQ_AHB_PROC:
-+ imr &= ~AR2315_ISR_AHB;
-+ break;
-+ case AR531X_MISC_IRQ_GPIO:
-+ imr &= ~AR2315_ISR_GPIO;
-+ break;
-+ case AR531X_MISC_IRQ_UART0:
-+ imr &= ~AR2315_ISR_UART0;
-+ break;
-+ case AR531X_MISC_IRQ_WATCHDOG:
-+ imr &= ~AR2315_ISR_WD;
-+ break;
-+ default:
-+ break;
-+ }
-+ ar231x_write_reg(AR2315_IMR, imr);
-+}
-+
-+static void
-+ar2315_misc_intr_end(unsigned int irq)
-+{
-+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-+ ar2315_misc_intr_enable(irq);
-+}
-+
-+
-+static struct irq_chip ar2315_misc_intr_controller = {
-+ .typename = "AR2315-MISC",
-+ .ack = ar2315_misc_intr_disable,
-+ .mask_ack = ar2315_misc_intr_disable,
-+ .mask = ar2315_misc_intr_disable,
-+ .unmask = ar2315_misc_intr_enable,
-+ .end = ar2315_misc_intr_end,
-+};
-+
-+static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
-+ ar231x_read_reg(AR2315_AHB_ERR1);
-+
-+ printk(KERN_ERR "AHB fatal error\n");
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction ar2315_ahb_proc_interrupt = {
-+ .handler = ar2315_ahb_proc_handler,
-+ .flags = IRQF_DISABLED,
-+ .name = "ar2315_ahb_proc_interrupt",
-+};
-+
-+static struct irqaction cascade = {
-+ .handler = no_action,
-+ .flags = IRQF_DISABLED,
-+ .name = "cascade",
-+};
-+
-+void
-+ar2315_irq_init(void)
-+{
-+ int i;
-+
-+ if (!is_2315())
-+ return;
-+
-+ ar231x_irq_dispatch = ar2315_irq_dispatch;
-+ gpiointval = ar231x_read_reg(AR2315_GPIO_DI);
-+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) {
-+ int irq = AR531X_MISC_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar2315_misc_intr_controller,
-+ handle_level_irq);
-+ }
-+ for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) {
-+ int irq = AR531X_GPIO_IRQ_BASE + i;
-+ set_irq_chip_and_handler(irq, &ar2315_gpio_intr_controller,
-+ handle_level_irq);
-+ }
-+ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
-+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt);
-+ setup_irq(AR2315_IRQ_MISC_INTRS, &cascade);
-+}
-+
-+const struct ar231x_gpiodev ar2315_gpiodev;
-+
-+static u32
-+ar2315_gpio_get_output(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_CR);
-+ reg &= ar2315_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_set_output(u32 mask, u32 val)
-+{
-+ u32 reg;
-+
-+ reg = ar231x_read_reg(AR2315_GPIO_CR);
-+ reg &= ~mask;
-+ reg |= val;
-+ ar231x_write_reg(AR2315_GPIO_CR, reg);
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_get(void)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_DI);
-+ reg &= ar2315_gpiodev.valid_mask;
-+ return reg;
-+}
-+
-+static u32
-+ar2315_gpio_set(u32 mask, u32 value)
-+{
-+ u32 reg;
-+ reg = ar231x_read_reg(AR2315_GPIO_DO);
-+ reg &= ~mask;
-+ reg |= value;
-+ ar231x_write_reg(AR2315_GPIO_DO, reg);
-+ return reg;
-+}
-+
-+const struct ar231x_gpiodev ar2315_gpiodev = {
-+ .valid_mask = (1 << 22) - 1,
-+ .get_output = ar2315_gpio_get_output,
-+ .set_output = ar2315_gpio_set_output,
-+ .get = ar2315_gpio_get,
-+ .set = ar2315_gpio_set,
-+};
-+
-+static struct ar231x_eth ar2315_eth_data = {
-+ .reset_base = AR2315_RESET,
-+ .reset_mac = AR2315_RESET_ENET0,
-+ .reset_phy = AR2315_RESET_EPHY0,
-+ .phy_base = AR2315_ENET0,
-+ .config = &ar231x_board,
-+};
-+
-+static struct resource ar2315_spiflash_res[] = {
-+ {
-+ .name = "flash_base",
-+ .flags = IORESOURCE_MEM,
-+ .start = KSEG1ADDR(AR2315_SPI_READ),
-+ .end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1,
-+ },
-+ {
-+ .name = "flash_regs",
-+ .flags = IORESOURCE_MEM,
-+ .start = 0x11300000,
-+ .end = 0x11300012,
-+ },
-+};
-+
-+static struct platform_device ar2315_spiflash = {
-+ .id = 0,
-+ .name = "spiflash",
-+ .resource = ar2315_spiflash_res,
-+ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
-+};
-+
-+static struct platform_device ar2315_wdt = {
-+ .id = 0,
-+ .name = "ar2315_wdt",
-+};
-+
-+#define SPI_FLASH_CTL 0x00
-+#define SPI_FLASH_OPCODE 0x04
-+#define SPI_FLASH_DATA 0x08
-+
-+static inline u32
-+spiflash_read_reg(int reg)
-+{
-+ return ar231x_read_reg(KSEG1ADDR(AR2315_SPI) + reg);
-+}
-+
-+static inline void
-+spiflash_write_reg(int reg, u32 data)
-+{
-+ ar231x_write_reg(KSEG1ADDR(AR2315_SPI) + reg, data);
-+}
-+
-+static u32
-+spiflash_wait_status(void)
-+{
-+ u32 reg;
-+
-+ do {
-+ reg = spiflash_read_reg(SPI_FLASH_CTL);
-+ } while (reg & SPI_CTL_BUSY);
-+
-+ return reg;
-+}
-+
-+static u8
-+spiflash_probe(void)
-+{
-+ u32 reg;
-+
-+ reg = spiflash_wait_status();
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= (1 << 4) | 4 | SPI_CTL_START;
-+
-+ spiflash_write_reg(SPI_FLASH_OPCODE, 0xab);
-+ spiflash_write_reg(SPI_FLASH_CTL, reg);
-+
-+ reg = spiflash_wait_status();
-+ reg = spiflash_read_reg(SPI_FLASH_DATA);
-+ reg &= 0xff;
-+
-+ return (u8) reg;
-+}
-+
-+
-+#define STM_8MBIT_SIGNATURE 0x13
-+#define STM_16MBIT_SIGNATURE 0x14
-+#define STM_32MBIT_SIGNATURE 0x15
-+#define STM_64MBIT_SIGNATURE 0x16
-+#define STM_128MBIT_SIGNATURE 0x17
-+
-+static u8 __init *
-+ar2315_flash_limit(void)
-+{
-+ u32 flash_size = 0;
-+
-+ /* probe the flash chip size */
-+ switch(spiflash_probe()) {
-+ case STM_8MBIT_SIGNATURE:
-+ flash_size = 0x00100000;
-+ break;
-+ case STM_16MBIT_SIGNATURE:
-+ flash_size = 0x00200000;
-+ break;
-+ case STM_32MBIT_SIGNATURE:
-+ flash_size = 0x00400000;
-+ break;
-+ case STM_64MBIT_SIGNATURE:
-+ flash_size = 0x00800000;
-+ break;
-+ case STM_128MBIT_SIGNATURE:
-+ flash_size = 0x01000000;
-+ break;
-+ }
-+
-+ ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start +
-+ flash_size - 1;
-+ return (u8 *) ar2315_spiflash_res[0].end + 1;
-+}
-+
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar2315_leds[6];
-+static struct gpio_led_platform_data ar2315_led_data = {
-+ .leds = (void *) ar2315_leds,
-+};
-+
-+static struct platform_device ar2315_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = (void *) &ar2315_led_data,
-+ }
-+};
-+
-+static void __init
-+ar2315_init_gpio(void)
-+{
-+ static char led_names[6][6];
-+ int i, led = 0;
-+
-+ ar2315_led_data.num_leds = 0;
-+ for(i = 1; i < 8; i++)
-+ {
-+ if((i == AR2315_RESET_GPIO) ||
-+ (i == ar231x_board.config->resetConfigGpio))
-+ continue;
-+
-+ if(i == ar231x_board.config->sysLedGpio)
-+ strcpy(led_names[led], "wlan");
-+ else
-+ sprintf(led_names[led], "gpio%d", i);
-+
-+ ar2315_leds[led].name = led_names[led];
-+ ar2315_leds[led].gpio = i;
-+ ar2315_leds[led].active_low = 0;
-+ led++;
-+ }
-+ ar2315_led_data.num_leds = led;
-+ platform_device_register(&ar2315_gpio_leds);
-+}
-+#else
-+static inline void ar2315_init_gpio(void)
-+{
-+}
-+#endif
-+
-+int __init
-+ar2315_init_devices(void)
-+{
-+ if (!is_2315())
-+ return 0;
-+
-+ /* Find board configuration */
-+ ar231x_find_config(ar2315_flash_limit());
-+ ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
-+
-+ ar2315_init_gpio();
-+ platform_device_register(&ar2315_wdt);
-+ platform_device_register(&ar2315_spiflash);
-+ ar231x_add_ethernet(0, AR2315_ENET0, AR2315_IRQ_ENET0_INTRS,
-+ &ar2315_eth_data);
-+ ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
-+
-+ return 0;
-+}
-+
-+static void
-+ar2315_restart(char *command)
-+{
-+ void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
-+
-+ local_irq_disable();
-+
-+ /* try reset the system via reset control */
-+ ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM);
-+
-+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
-+ * give it some time to attempt a gpio based hardware reset
-+ * (atheros reference design workaround) */
-+ gpio_direction_output(AR2315_RESET_GPIO, 0);
-+ mdelay(100);
-+
-+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
-+ * workaround. Attempt to jump to the mips reset location -
-+ * the boot loader itself might be able to recover the system */
-+ mips_reset_vec();
-+}
-+
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
-+static int __initdata PLLC_DIVIDE_TABLE[5] = { 2, 3, 4, 6, 3 };
-+
-+static unsigned int __init
-+ar2315_sys_clk(unsigned int clockCtl)
-+{
-+ unsigned int pllcCtrl,cpuDiv;
-+ unsigned int pllcOut,refdiv,fdiv,divby2;
-+ unsigned int clkDiv;
-+
-+ pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL);
-+ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
-+ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
-+ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
-+ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
-+ divby2 += 1;
-+ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
-+
-+
-+ /* clkm input selected */
-+ switch(clockCtl & CPUCLK_CLK_SEL_M) {
-+ case 0:
-+ case 1:
-+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
-+ break;
-+ case 2:
-+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
-+ break;
-+ default:
-+ pllcOut = 40000000;
-+ clkDiv = 1;
-+ break;
-+ }
-+ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
-+ cpuDiv = cpuDiv * 2 ?: 1;
-+ return (pllcOut/(clkDiv * cpuDiv));
-+}
-+
-+static inline unsigned int
-+ar2315_cpu_frequency(void)
-+{
-+ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK));
-+}
-+
-+static inline unsigned int
-+ar2315_apb_frequency(void)
-+{
-+ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK));
-+}
-+
-+void __init
-+ar2315_time_init(void)
-+{
-+ if (!is_2315())
-+ return;
-+
-+ mips_hpt_frequency = ar2315_cpu_frequency() / 2;
-+}
-+
-+void __init
-+ar2315_prom_init(void)
-+{
-+ u32 memsize, memcfg, devid;
-+
-+ if (!is_2315())
-+ return;
-+
-+ memcfg = ar231x_read_reg(AR2315_MEM_CFG);
-+ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
-+ memsize <<= 3;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ /* Detect the hardware based on the device ID */
-+ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP;
-+ switch(devid) {
-+ case 0x90:
-+ case 0x91:
-+ ar231x_devtype = DEV_TYPE_AR2317;
-+ break;
-+ default:
-+ ar231x_devtype = DEV_TYPE_AR2315;
-+ break;
-+ }
-+ ar231x_gpiodev = &ar2315_gpiodev;
-+ ar231x_board.devid = devid;
-+}
-+
-+void __init
-+ar2315_plat_setup(void)
-+{
-+ u32 config;
-+
-+ if (!is_2315())
-+ return;
-+
-+ /* Clear any lingering AHB errors */
-+ config = read_c0_config();
-+ write_c0_config(config & ~0x3);
-+ ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET);
-+ ar231x_read_reg(AR2315_AHB_ERR1);
-+ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
-+
-+ _machine_restart = ar2315_restart;
-+ ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency());
-+}
---- /dev/null
-+++ b/arch/mips/ar231x/ar2315.h
-@@ -0,0 +1,37 @@
-+#ifndef __AR2315_H
-+#define __AR2315_H
-+
-+#ifdef CONFIG_ATHEROS_AR2315
-+
-+extern void ar2315_irq_init(void);
-+extern int ar2315_init_devices(void);
-+extern void ar2315_prom_init(void);
-+extern void ar2315_plat_setup(void);
-+extern void ar2315_time_init(void);
-+
-+#else
-+
-+static inline void ar2315_irq_init(void)
-+{
-+}
-+
-+static inline int ar2315_init_devices(void)
-+{
-+ return 0;
-+}
-+
-+static inline void ar2315_prom_init(void)
-+{
-+}
-+
-+static inline void ar2315_plat_setup(void)
-+{
-+}
-+
-+static inline void ar2315_time_init(void)
-+{
-+}
-+
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/ar5312.h
-@@ -0,0 +1,38 @@
-+#ifndef __AR5312_H
-+#define __AR5312_H
-+
-+#ifdef CONFIG_ATHEROS_AR5312
-+
-+extern void ar5312_irq_init(void);
-+extern int ar5312_init_devices(void);
-+extern void ar5312_prom_init(void);
-+extern void ar5312_plat_setup(void);
-+extern void ar5312_time_init(void);
-+extern void ar5312_time_init(void);
-+
-+#else
-+
-+static inline void ar5312_irq_init(void)
-+{
-+}
-+
-+static inline int ar5312_init_devices(void)
-+{
-+ return 0;
-+}
-+
-+static inline void ar5312_prom_init(void)
-+{
-+}
-+
-+static inline void ar5312_plat_setup(void)
-+{
-+}
-+
-+static inline void ar5312_time_init(void)
-+{
-+}
-+
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar231x.h
-@@ -0,0 +1,54 @@
-+#ifndef __AR531X_H
-+#define __AR531X_H
-+
-+#define AR531X_MISC_IRQ_BASE 0x20
-+#define AR531X_GPIO_IRQ_BASE 0x30
-+
-+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
-+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
-+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-+
-+/* Miscellaneous interrupts, which share IP6 */
-+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
-+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
-+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
-+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
-+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
-+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
-+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
-+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
-+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
-+#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9
-+#define AR531X_MISC_IRQ_COUNT 10
-+
-+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
-+#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0
-+#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n
-+#define AR531X_GPIO_IRQ_COUNT 22
-+
-+static inline u32
-+ar231x_read_reg(u32 reg)
-+{
-+ return __raw_readl((u32 *) KSEG1ADDR(reg));
-+}
-+
-+static inline void
-+ar231x_write_reg(u32 reg, u32 val)
-+{
-+ __raw_writel(val, (u32 *) KSEG1ADDR(reg));
-+}
-+
-+static inline u32
-+ar231x_mask_reg(u32 reg, u32 mask, u32 val)
-+{
-+ u32 ret;
-+
-+ ret = ar231x_read_reg(reg);
-+ ret &= ~mask;
-+ ret |= val;
-+ ar231x_write_reg(reg, ret);
-+
-+ return ret;
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/devices.h
-@@ -0,0 +1,37 @@
-+#ifndef __AR231X_DEVICES_H
-+#define __AR231X_DEVICES_H
-+
-+enum {
-+ /* handled by ar5312.c */
-+ DEV_TYPE_AR2312,
-+ DEV_TYPE_AR2313,
-+ DEV_TYPE_AR5312,
-+
-+ /* handled by ar2315.c */
-+ DEV_TYPE_AR2315,
-+ DEV_TYPE_AR2316,
-+ DEV_TYPE_AR2317,
-+
-+ DEV_TYPE_UNKNOWN
-+};
-+
-+extern int ar231x_devtype;
-+extern struct ar231x_board_config ar231x_board;
-+extern asmlinkage void (*ar231x_irq_dispatch)(void);
-+
-+extern int ar231x_find_config(u8 *flash_limit);
-+extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk);
-+extern int ar231x_add_wmac(int nr, u32 base, int irq);
-+extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata);
-+
-+static inline bool is_2315(void)
-+{
-+ return (current_cpu_data.cputype == CPU_4KEC);
-+}
-+
-+static inline bool is_5312(void)
-+{
-+ return !is_2315();
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/devices.c
-@@ -0,0 +1,175 @@
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial_8250.h>
-+#include <linux/platform_device.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+struct ar231x_board_config ar231x_board;
-+int ar231x_devtype = DEV_TYPE_UNKNOWN;
-+const struct ar231x_gpiodev *ar231x_gpiodev;
-+EXPORT_SYMBOL(ar231x_gpiodev);
-+
-+static struct resource ar231x_eth0_res[] = {
-+ {
-+ .name = "eth0_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth0_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct resource ar231x_eth1_res[] = {
-+ {
-+ .name = "eth1_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth1_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device ar231x_eth[] = {
-+ {
-+ .id = 0,
-+ .name = "ar231x-eth",
-+ .resource = ar231x_eth0_res,
-+ .num_resources = ARRAY_SIZE(ar231x_eth0_res)
-+ },
-+ {
-+ .id = 1,
-+ .name = "ar231x-eth",
-+ .resource = ar231x_eth1_res,
-+ .num_resources = ARRAY_SIZE(ar231x_eth1_res)
-+ }
-+};
-+
-+static struct resource ar231x_wmac0_res[] = {
-+ {
-+ .name = "wmac0_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "wmac0_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct resource ar231x_wmac1_res[] = {
-+ {
-+ .name = "wmac1_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "wmac1_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+
-+static struct platform_device ar231x_wmac[] = {
-+ {
-+ .id = 0,
-+ .name = "ar231x-wmac",
-+ .resource = ar231x_wmac0_res,
-+ .num_resources = ARRAY_SIZE(ar231x_wmac0_res),
-+ .dev.platform_data = &ar231x_board,
-+ },
-+ {
-+ .id = 1,
-+ .name = "ar231x-wmac",
-+ .resource = ar231x_wmac1_res,
-+ .num_resources = ARRAY_SIZE(ar231x_wmac1_res),
-+ .dev.platform_data = &ar231x_board,
-+ },
-+};
-+
-+static const char *devtype_strings[] = {
-+ [DEV_TYPE_AR5312] = "Atheros AR5312",
-+ [DEV_TYPE_AR2312] = "Atheros AR2312",
-+ [DEV_TYPE_AR2313] = "Atheros AR2313",
-+ [DEV_TYPE_AR2315] = "Atheros AR2315",
-+ [DEV_TYPE_AR2316] = "Atheros AR2316",
-+ [DEV_TYPE_AR2317] = "Atheros AR2317",
-+ [DEV_TYPE_UNKNOWN] = "Atheros (unknown)",
-+};
-+
-+const char *get_system_type(void)
-+{
-+ if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) ||
-+ !devtype_strings[ar231x_devtype])
-+ return devtype_strings[DEV_TYPE_UNKNOWN];
-+ return devtype_strings[ar231x_devtype];
-+}
-+
-+
-+int __init
-+ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata)
-+{
-+ struct resource *res;
-+
-+ ar231x_eth[nr].dev.platform_data = pdata;
-+ res = &ar231x_eth[nr].resource[0];
-+ res->start = base;
-+ res->end = base + 0x2000 - 1;
-+ res++;
-+ res->start = irq;
-+ res->end = irq;
-+ return platform_device_register(&ar231x_eth[nr]);
-+}
-+
-+void __init
-+ar231x_serial_setup(u32 mapbase, unsigned int uartclk)
-+{
-+ struct uart_port s;
-+
-+ memset(&s, 0, sizeof(s));
-+
-+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-+ s.iotype = UPIO_MEM;
-+ s.irq = AR531X_MISC_IRQ_UART0;
-+ s.regshift = 2;
-+ s.mapbase = mapbase;
-+ s.uartclk = uartclk;
-+ s.membase = (void __iomem *)s.mapbase;
-+
-+ early_serial_setup(&s);
-+}
-+
-+int __init
-+ar231x_add_wmac(int nr, u32 base, int irq)
-+{
-+ struct resource *res;
-+
-+ ar231x_wmac[nr].dev.platform_data = &ar231x_board;
-+ res = &ar231x_wmac[nr].resource[0];
-+ res->start = base;
-+ res->end = base + 0x10000 - 1;
-+ res++;
-+ res->start = irq;
-+ res->end = irq;
-+ return platform_device_register(&ar231x_wmac[nr]);
-+}
-+
-+static int __init ar231x_register_devices(void)
-+{
-+ static struct resource res = {
-+ .start = 0xFFFFFFFF,
-+ };
-+
-+ platform_device_register_simple("GPIODEV", 0, &res, 1);
-+ ar5312_init_devices();
-+ ar2315_init_devices();
-+
-+ return 0;
-+}
-+
-+device_initcall(ar231x_register_devices);
diff --git a/target/linux/atheros/patches-2.6.36/101-early-printk-support.patch b/target/linux/atheros/patches-2.6.36/101-early-printk-support.patch
deleted file mode 100644
index a4876f8807..0000000000
--- a/target/linux/atheros/patches-2.6.36/101-early-printk-support.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- /dev/null
-+++ b/arch/mips/ar231x/early_printk.c
-@@ -0,0 +1,44 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ */
-+
-+#include <linux/mm.h>
-+#include <linux/io.h>
-+#include <linux/serial_reg.h>
-+#include <asm/addrspace.h>
-+
-+#include <asm/mach-ar231x/ar2315_regs.h>
-+#include <asm/mach-ar231x/ar5312_regs.h>
-+#include "devices.h"
-+
-+static inline void prom_uart_wr(void __iomem *base, unsigned reg,
-+ unsigned char ch)
-+{
-+ __raw_writeb(ch, base + 4 * reg);
-+}
-+
-+static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg)
-+{
-+ return __raw_readb(base + 4 * reg);
-+}
-+
-+void prom_putchar(unsigned char ch)
-+{
-+ static void __iomem *base;
-+
-+ if (unlikely(base == NULL)) {
-+ if (is_2315())
-+ base = (void __iomem *)(KSEG1ADDR(AR2315_UART0));
-+ else
-+ base = (void __iomem *)(KSEG1ADDR(AR531X_UART0));
-+ }
-+
-+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
-+ prom_uart_wr(base, UART_TX, ch);
-+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0);
-+}
-+
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -9,5 +9,8 @@
- #
-
- obj-y += board.o prom.o devices.o
-+
-+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-+
- obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
- obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -107,6 +107,7 @@ config ATHEROS_AR231X
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_32BIT_KERNEL
- select GENERIC_GPIO
-+ select SYS_HAS_EARLY_PRINTK
- help
- Support for AR231x and AR531x based boards
-
diff --git a/target/linux/atheros/patches-2.6.36/105-ar2315_pci.patch b/target/linux/atheros/patches-2.6.36/105-ar2315_pci.patch
deleted file mode 100644
index 3f5e6b4528..0000000000
--- a/target/linux/atheros/patches-2.6.36/105-ar2315_pci.patch
+++ /dev/null
@@ -1,297 +0,0 @@
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -14,3 +14,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin
-
- obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o
- obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o
-+obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o
---- /dev/null
-+++ b/arch/mips/ar231x/pci.c
-@@ -0,0 +1,230 @@
-+/*
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/spinlock.h>
-+#include <linux/delay.h>
-+#include <linux/irq.h>
-+#include <asm/bootinfo.h>
-+#include <asm/paccess.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/io.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include <ar2315_regs.h>
-+#include "devices.h"
-+
-+#define AR531X_MEM_BASE 0x80800000UL
-+#define AR531X_MEM_SIZE 0x00ffffffUL
-+#define AR531X_IO_SIZE 0x00007fffUL
-+
-+static unsigned long configspace;
-+
-+static int config_access(int devfn, int where, int size, u32 *ptr, bool write)
-+{
-+ unsigned long flags;
-+ int func = PCI_FUNC(devfn);
-+ int dev = PCI_SLOT(devfn);
-+ u32 value = 0;
-+ int err = 0;
-+ u32 addr;
-+
-+ if (((dev != 0) && (dev != 3)) || (func > 2))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ /* Select Configuration access */
-+ local_irq_save(flags);
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, 0, AR2315_PCIMISC_CFG_SEL);
-+ mb();
-+
-+ addr = (u32) configspace + (1 << (13 + dev)) + (func << 8) + where;
-+ if (size == 1)
-+ addr ^= 0x3;
-+ else if (size == 2)
-+ addr ^= 0x2;
-+
-+ if (write) {
-+ value = *ptr;
-+ if (size == 1)
-+ err = put_dbe(value, (u8 *) addr);
-+ else if (size == 2)
-+ err = put_dbe(value, (u16 *) addr);
-+ else if (size == 4)
-+ err = put_dbe(value, (u32 *) addr);
-+ } else {
-+ if (size == 1)
-+ err = get_dbe(value, (u8 *) addr);
-+ else if (size == 2)
-+ err = get_dbe(value, (u16 *) addr);
-+ else if (size == 4)
-+ err = get_dbe(value, (u32 *) addr);
-+ if (err)
-+ *ptr = 0xffffffff;
-+ else
-+ *ptr = value;
-+ }
-+
-+ /* Select Memory access */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_CFG_SEL, 0);
-+ local_irq_restore(flags);
-+
-+ return (err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL);
-+}
-+
-+static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
-+{
-+ return config_access(devfn, where, size, value, 0);
-+}
-+
-+static int ar231x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-+{
-+ return config_access(devfn, where, size, &value, 1);
-+}
-+
-+struct pci_ops ar231x_pci_ops = {
-+ .read = ar231x_pci_read,
-+ .write = ar231x_pci_write,
-+};
-+
-+static struct resource ar231x_mem_resource = {
-+ .name = "AR531x PCI MEM",
-+ .start = AR531X_MEM_BASE,
-+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource ar231x_io_resource = {
-+ .name = "AR531x PCI I/O",
-+ .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
-+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+struct pci_controller ar231x_pci_controller = {
-+ .pci_ops = &ar231x_pci_ops,
-+ .mem_resource = &ar231x_mem_resource,
-+ .io_resource = &ar231x_io_resource,
-+ .mem_offset = 0x00000000UL,
-+ .io_offset = 0x00000000UL,
-+};
-+
-+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return AR2315_IRQ_LCBUS_PCI;
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
-+ pci_write_config_word(dev, 0x40, 0);
-+
-+ /* Clear any pending Abort or external Interrupts
-+ * and enable interrupt processing */
-+ ar231x_mask_reg(AR2315_PCI_INTEN_REG, AR2315_PCI_INT_ENABLE, 0);
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
-+ ar231x_write_reg(AR2315_PCI_INT_MASK, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT));
-+ ar231x_mask_reg(AR2315_PCI_INTEN_REG, 0, AR2315_PCI_INT_ENABLE);
-+
-+ return 0;
-+}
-+
-+static void
-+ar2315_pci_fixup(struct pci_dev *dev)
-+{
-+ unsigned int devfn = dev->devfn;
-+
-+ if (dev->bus->number != 0)
-+ return;
-+
-+ /* Only fix up the PCI host settings */
-+ if ((PCI_SLOT(devfn) != 3) || (PCI_FUNC(devfn) != 0))
-+ return;
-+
-+ /* Fix up MBARs */
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, HOST_PCI_MBAR0);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, HOST_PCI_MBAR1);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, HOST_PCI_MBAR2);
-+ pci_write_config_dword(dev, PCI_COMMAND,
-+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL |
-+ PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR |
-+ PCI_COMMAND_FAST_BACK);
-+}
-+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar2315_pci_fixup);
-+
-+static int __init
-+ar2315_pci_init(void)
-+{
-+ u32 reg;
-+
-+ if (ar231x_devtype != DEV_TYPE_AR2315)
-+ return -ENODEV;
-+
-+ configspace = (unsigned long) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
-+ ar231x_pci_controller.io_map_base =
-+ (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE);
-+ set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space */
-+
-+ reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
-+ msleep(10);
-+
-+ reg &= ~AR2315_RESET_PCIDMA;
-+ ar231x_write_reg(AR2315_RESET, reg);
-+ msleep(10);
-+
-+ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0,
-+ AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE);
-+
-+ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
-+ (AR2315_PCICLK_IN_FREQ_DIV_6 << AR2315_PCICLK_DIV_S));
-+ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
-+ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | AR2315_IF_MASK,
-+ AR2315_IF_PCI | AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
-+ (AR2315_IF_PCI_CLK_OUTPUT_CLK << AR2315_IF_PCI_CLK_SHIFT));
-+
-+ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
-+ AR2315_PCIRST_LOW);
-+ msleep(100);
-+
-+ /* Bring the PCI out of reset */
-+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
-+ AR2315_PCIRST_HIGH | AR2315_PCICACHE_DIS | 0x8);
-+
-+ ar231x_write_reg(AR2315_PCI_UNCACHE_CFG,
-+ 0x1E | /* 1GB uncached */
-+ (1 << 5) | /* Enable uncached */
-+ (0x2 << 30) /* Base: 0x80000000 */
-+ );
-+ ar231x_read_reg(AR2315_PCI_UNCACHE_CFG);
-+
-+ msleep(500);
-+
-+ /* dirty hack - anyone with a datasheet that knows the memory map ? */
-+ ioport_resource.start = 0x10000000;
-+ ioport_resource.end = 0xffffffff;
-+ iomem_resource.start = 0x10000000;
-+ iomem_resource.end = 0xffffffff;
-+
-+ register_pci_controller(&ar231x_pci_controller);
-+
-+ return 0;
-+}
-+
-+arch_initcall(ar2315_pci_init);
---- a/arch/mips/ar231x/Kconfig
-+++ b/arch/mips/ar231x/Kconfig
-@@ -15,3 +15,13 @@ config ATHEROS_AR2315
- select SYS_SUPPORTS_BIG_ENDIAN
- select GENERIC_GPIO
- default y
-+
-+config ATHEROS_AR2315_PCI
-+ bool "PCI support"
-+ depends on ATHEROS_AR2315
-+ select HW_HAS_PCI
-+ select PCI
-+ select USB_ARCH_HAS_HCD
-+ select USB_ARCH_HAS_OHCI
-+ select USB_ARCH_HAS_EHCI
-+ default y
---- a/arch/mips/ar231x/ar2315.c
-+++ b/arch/mips/ar231x/ar2315.c
-@@ -63,6 +63,27 @@ static inline void ar2315_gpio_irq(void)
- do_IRQ(AR531X_GPIO_IRQ_BASE + bit);
- }
-
-+#ifdef CONFIG_ATHEROS_AR2315_PCI
-+static inline void pci_abort_irq(void)
-+{
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_ABORT_INT);
-+}
-+
-+static inline void pci_ack_irq(void)
-+{
-+ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_EXT_INT);
-+}
-+
-+void ar2315_pci_irq(int irq)
-+{
-+ if (ar231x_read_reg(AR2315_PCI_INT_STATUS) == AR2315_PCI_ABORT_INT)
-+ pci_abort_irq();
-+ else {
-+ do_IRQ(irq);
-+ pci_ack_irq();
-+ }
-+}
-+#endif /* CONFIG_ATHEROS_AR2315_PCI */
-
- /*
- * Called when an interrupt is received, this function
-@@ -81,6 +102,10 @@ ar2315_irq_dispatch(void)
- do_IRQ(AR2315_IRQ_WLAN0_INTRS);
- else if (pending & CAUSEF_IP4)
- do_IRQ(AR2315_IRQ_ENET0_INTRS);
-+#ifdef CONFIG_ATHEROS_AR2315_PCI
-+ else if (pending & CAUSEF_IP5)
-+ ar2315_pci_irq(AR2315_IRQ_LCBUS_PCI);
-+#endif
- else if (pending & CAUSEF_IP2) {
- unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR);
-
diff --git a/target/linux/atheros/patches-2.6.36/110-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.36/110-ar2313_ethernet.patch
deleted file mode 100644
index 6e7077f910..0000000000
--- a/target/linux/atheros/patches-2.6.36/110-ar2313_ethernet.patch
+++ /dev/null
@@ -1,1611 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -248,6 +248,12 @@ config AX88796_93CX6
- help
- Select this if your platform comes with an external 93CX6 eeprom.
-
-+config AR231X_ETHERNET
-+ tristate "AR231x Ethernet support"
-+ depends on ATHEROS_AR231X
-+ help
-+ Support for the AR231x/531x ethernet controller
-+
- config MACE
- tristate "MACE (Power Mac ethernet) support"
- depends on PPC_PMAC && PPC32
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -220,6 +220,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
- obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
-+obj-$(CONFIG_AR231X_ETHERNET) += ar231x.o
- obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
- obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
- obj-$(CONFIG_DECLANCE) += declance.o
---- /dev/null
-+++ b/drivers/net/ar231x.c
-@@ -0,0 +1,1278 @@
-+/*
-+ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Additional credits:
-+ * This code is taken from John Taylor's Sibyte driver and then
-+ * modified for the AR2313.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+#include <linux/sockios.h>
-+#include <linux/pkt_sched.h>
-+#include <linux/mii.h>
-+#include <linux/phy.h>
-+#include <linux/ethtool.h>
-+#include <linux/ctype.h>
-+#include <linux/platform_device.h>
-+
-+#include <net/sock.h>
-+#include <net/ip.h>
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/byteorder.h>
-+#include <asm/uaccess.h>
-+#include <asm/bootinfo.h>
-+
-+#define AR2313_MTU 1692
-+#define AR2313_PRIOS 1
-+#define AR2313_QUEUES (2*AR2313_PRIOS)
-+#define AR2313_DESCR_ENTRIES 64
-+
-+
-+#ifndef min
-+#define min(a,b) (((a)<(b))?(a):(b))
-+#endif
-+
-+#ifndef SMP_CACHE_BYTES
-+#define SMP_CACHE_BYTES L1_CACHE_BYTES
-+#endif
-+
-+#define AR2313_MBOX_SET_BIT 0x8
-+
-+#include "ar231x.h"
-+
-+/*
-+ * New interrupt handler strategy:
-+ *
-+ * An old interrupt handler worked using the traditional method of
-+ * replacing an skbuff with a new one when a packet arrives. However
-+ * the rx rings do not need to contain a static number of buffer
-+ * descriptors, thus it makes sense to move the memory allocation out
-+ * of the main interrupt handler and do it in a bottom half handler
-+ * and only allocate new buffers when the number of buffers in the
-+ * ring is below a certain threshold. In order to avoid starving the
-+ * NIC under heavy load it is however necessary to force allocation
-+ * when hitting a minimum threshold. The strategy for alloction is as
-+ * follows:
-+ *
-+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
-+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
-+ * the buffers in the interrupt handler
-+ * RX_RING_THRES - maximum number of buffers in the rx ring
-+ *
-+ * One advantagous side effect of this allocation approach is that the
-+ * entire rx processing can be done without holding any spin lock
-+ * since the rx rings and registers are totally independent of the tx
-+ * ring and its registers. This of course includes the kmalloc's of
-+ * new skb's. Thus start_xmit can run in parallel with rx processing
-+ * and the memory allocation on SMP systems.
-+ *
-+ * Note that running the skb reallocation in a bottom half opens up
-+ * another can of races which needs to be handled properly. In
-+ * particular it can happen that the interrupt handler tries to run
-+ * the reallocation while the bottom half is either running on another
-+ * CPU or was interrupted on the same CPU. To get around this the
-+ * driver uses bitops to prevent the reallocation routines from being
-+ * reentered.
-+ *
-+ * TX handling can also be done without holding any spin lock, wheee
-+ * this is fun! since tx_csm is only written to by the interrupt
-+ * handler.
-+ */
-+
-+/*
-+ * Threshold values for RX buffer allocation - the low water marks for
-+ * when to start refilling the rings are set to 75% of the ring
-+ * sizes. It seems to make sense to refill the rings entirely from the
-+ * intrrupt handler once it gets below the panic threshold, that way
-+ * we don't risk that the refilling is moved to another CPU when the
-+ * one running the interrupt handler just got the slab code hot in its
-+ * cache.
-+ */
-+#define RX_RING_SIZE AR2313_DESCR_ENTRIES
-+#define RX_PANIC_THRES (RX_RING_SIZE/4)
-+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
-+#define CRC_LEN 4
-+#define RX_OFFSET 2
-+
-+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-+#define VLAN_HDR 4
-+#else
-+#define VLAN_HDR 0
-+#endif
-+
-+#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
-+
-+#ifdef MODULE
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
-+MODULE_DESCRIPTION("AR231x Ethernet driver");
-+#endif
-+
-+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-+
-+// prototypes
-+static void ar231x_halt(struct net_device *dev);
-+static void rx_tasklet_func(unsigned long data);
-+static void rx_tasklet_cleanup(struct net_device *dev);
-+static void ar231x_multicast_list(struct net_device *dev);
-+static void ar231x_tx_timeout(struct net_device *dev);
-+
-+static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
-+static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
-+static int ar231x_mdiobus_reset(struct mii_bus *bus);
-+static int ar231x_mdiobus_probe (struct net_device *dev);
-+static void ar231x_adjust_link(struct net_device *dev);
-+
-+#ifndef ERR
-+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-+#endif
-+
-+static const struct net_device_ops ar231x_ops = {
-+ .ndo_open = ar231x_open,
-+ .ndo_stop = ar231x_close,
-+ .ndo_start_xmit = ar231x_start_xmit,
-+ .ndo_set_multicast_list = ar231x_multicast_list,
-+ .ndo_do_ioctl = ar231x_ioctl,
-+ .ndo_change_mtu = eth_change_mtu,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_set_mac_address = eth_mac_addr,
-+ .ndo_tx_timeout = ar231x_tx_timeout,
-+};
-+
-+int __init ar231x_probe(struct platform_device *pdev)
-+{
-+ struct net_device *dev;
-+ struct ar231x_private *sp;
-+ struct resource *res;
-+ unsigned long ar_eth_base;
-+ char buf[64];
-+
-+ dev = alloc_etherdev(sizeof(struct ar231x_private));
-+
-+ if (dev == NULL) {
-+ printk(KERN_ERR
-+ "ar231x: Unable to allocate net_device structure!\n");
-+ return -ENOMEM;
-+ }
-+
-+ platform_set_drvdata(pdev, dev);
-+
-+ sp = netdev_priv(dev);
-+ sp->dev = dev;
-+ sp->cfg = pdev->dev.platform_data;
-+
-+ sprintf(buf, "eth%d_membase", pdev->id);
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
-+ if (!res)
-+ return -ENODEV;
-+
-+ sp->link = 0;
-+ ar_eth_base = res->start;
-+
-+ sprintf(buf, "eth%d_irq", pdev->id);
-+ dev->irq = platform_get_irq_byname(pdev, buf);
-+
-+ spin_lock_init(&sp->lock);
-+
-+ dev->features |= NETIF_F_HIGHDMA;
-+ dev->netdev_ops = &ar231x_ops;
-+
-+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ sp->eth_regs =
-+ ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
-+ if (!sp->eth_regs) {
-+ printk("Can't remap eth registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ /*
-+ * When there's only one MAC, PHY regs are typically on ENET0,
-+ * even though the MAC might be on ENET1.
-+ * Needto remap PHY regs separately in this case
-+ */
-+ if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
-+ sp->phy_regs = sp->eth_regs;
-+ else {
-+ sp->phy_regs =
-+ ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
-+ sizeof(*sp->phy_regs));
-+ if (!sp->phy_regs) {
-+ printk("Can't remap phy registers\n");
-+ return (-ENXIO);
-+ }
-+ }
-+
-+ sp->dma_regs =
-+ ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
-+ sizeof(*sp->dma_regs));
-+ dev->base_addr = (unsigned int) sp->dma_regs;
-+ if (!sp->dma_regs) {
-+ printk("Can't remap DMA registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
-+ if (!sp->int_regs) {
-+ printk("Can't remap INTERRUPT registers\n");
-+ return (-ENXIO);
-+ }
-+
-+ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
-+ sp->name[sizeof(sp->name) - 1] = '\0';
-+ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
-+
-+ if (ar231x_init(dev)) {
-+ /*
-+ * ar231x_init() calls ar231x_init_cleanup() on error.
-+ */
-+ kfree(dev);
-+ return -ENODEV;
-+ }
-+
-+ if (register_netdev(dev)) {
-+ printk("%s: register_netdev failed\n", __func__);
-+ return -1;
-+ }
-+
-+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
-+ dev->name, sp->name,
-+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
-+
-+ sp->mii_bus = mdiobus_alloc();
-+ if (sp->mii_bus == NULL)
-+ return -1;
-+
-+ sp->mii_bus->priv = dev;
-+ sp->mii_bus->read = ar231x_mdiobus_read;
-+ sp->mii_bus->write = ar231x_mdiobus_write;
-+ sp->mii_bus->reset = ar231x_mdiobus_reset;
-+ sp->mii_bus->name = "ar231x_eth_mii";
-+ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
-+ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
-+ *sp->mii_bus->irq = PHY_POLL;
-+
-+ mdiobus_register(sp->mii_bus);
-+
-+ if (ar231x_mdiobus_probe(dev) != 0) {
-+ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
-+ rx_tasklet_cleanup(dev);
-+ ar231x_init_cleanup(dev);
-+ unregister_netdev(dev);
-+ kfree(dev);
-+ return -ENODEV;
-+ }
-+
-+ /* start link poll timer */
-+ ar231x_setup_timer(dev);
-+
-+ return 0;
-+}
-+
-+
-+static void ar231x_multicast_list(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int filter;
-+
-+ filter = sp->eth_regs->mac_control;
-+
-+ if (dev->flags & IFF_PROMISC)
-+ filter |= MAC_CONTROL_PR;
-+ else
-+ filter &= ~MAC_CONTROL_PR;
-+ if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 0))
-+ filter |= MAC_CONTROL_PM;
-+ else
-+ filter &= ~MAC_CONTROL_PM;
-+
-+ sp->eth_regs->mac_control = filter;
-+}
-+
-+static void rx_tasklet_cleanup(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ /*
-+ * Tasklet may be scheduled. Need to get it removed from the list
-+ * since we're about to free the struct.
-+ */
-+
-+ sp->unloading = 1;
-+ tasklet_enable(&sp->rx_tasklet);
-+ tasklet_kill(&sp->rx_tasklet);
-+}
-+
-+static int __devexit ar231x_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ rx_tasklet_cleanup(dev);
-+ ar231x_init_cleanup(dev);
-+ unregister_netdev(dev);
-+ mdiobus_unregister(sp->mii_bus);
-+ mdiobus_free(sp->mii_bus);
-+ kfree(dev);
-+ return 0;
-+}
-+
-+
-+/*
-+ * Restart the AR2313 ethernet controller.
-+ */
-+static int ar231x_restart(struct net_device *dev)
-+{
-+ /* disable interrupts */
-+ disable_irq(dev->irq);
-+
-+ /* stop mac */
-+ ar231x_halt(dev);
-+
-+ /* initialize */
-+ ar231x_init(dev);
-+
-+ /* enable interrupts */
-+ enable_irq(dev->irq);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ar231x_driver = {
-+ .driver.name = "ar231x-eth",
-+ .probe = ar231x_probe,
-+ .remove = __devexit_p(ar231x_remove),
-+};
-+
-+int __init ar231x_module_init(void)
-+{
-+ return platform_driver_register(&ar231x_driver);
-+}
-+
-+void __exit ar231x_module_cleanup(void)
-+{
-+ platform_driver_unregister(&ar231x_driver);
-+}
-+
-+module_init(ar231x_module_init);
-+module_exit(ar231x_module_cleanup);
-+
-+
-+static void ar231x_free_descriptors(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ if (sp->rx_ring != NULL) {
-+ kfree((void *) KSEG0ADDR(sp->rx_ring));
-+ sp->rx_ring = NULL;
-+ sp->tx_ring = NULL;
-+ }
-+}
-+
-+
-+static int ar231x_allocate_descriptors(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int size;
-+ int j;
-+ ar231x_descr_t *space;
-+
-+ if (sp->rx_ring != NULL) {
-+ printk("%s: already done.\n", __FUNCTION__);
-+ return 0;
-+ }
-+
-+ size =
-+ (sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
-+ space = kmalloc(size, GFP_KERNEL);
-+ if (space == NULL)
-+ return 1;
-+
-+ /* invalidate caches */
-+ dma_cache_inv((unsigned int) space, size);
-+
-+ /* now convert pointer to KSEG1 */
-+ space = (ar231x_descr_t *) KSEG1ADDR(space);
-+
-+ memset((void *) space, 0, size);
-+
-+ sp->rx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ sp->tx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ /* Initialize the transmit Descriptors */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ ar231x_descr_t *td = &sp->tx_ring[j];
-+ td->status = 0;
-+ td->devcs = DMA_TX1_CHAINED;
-+ td->addr = 0;
-+ td->descr =
-+ virt_to_phys(&sp->
-+ tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * Generic cleanup handling data allocated during init. Used when the
-+ * module is unloaded or if an error occurs during initialization
-+ */
-+static void ar231x_init_cleanup(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ struct sk_buff *skb;
-+ int j;
-+
-+ ar231x_free_descriptors(dev);
-+
-+ if (sp->eth_regs)
-+ iounmap((void *) sp->eth_regs);
-+ if (sp->dma_regs)
-+ iounmap((void *) sp->dma_regs);
-+
-+ if (sp->rx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->rx_skb[j];
-+ if (skb) {
-+ sp->rx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->rx_skb);
-+ sp->rx_skb = NULL;
-+ }
-+
-+ if (sp->tx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ sp->tx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->tx_skb);
-+ sp->tx_skb = NULL;
-+ }
-+}
-+
-+static int ar231x_setup_timer(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ init_timer(&sp->link_timer);
-+
-+ sp->link_timer.function = ar231x_link_timer_fn;
-+ sp->link_timer.data = (int) dev;
-+ sp->link_timer.expires = jiffies + HZ;
-+
-+ add_timer(&sp->link_timer);
-+ return 0;
-+
-+}
-+
-+static void ar231x_link_timer_fn(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ // see if the link status changed
-+ // This was needed to make sure we set the PHY to the
-+ // autonegotiated value of half or full duplex.
-+ ar231x_check_link(dev);
-+
-+ // Loop faster when we don't have link.
-+ // This was needed to speed up the AP bootstrap time.
-+ if (sp->link == 0) {
-+ mod_timer(&sp->link_timer, jiffies + HZ / 2);
-+ } else {
-+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
-+ }
-+}
-+
-+static void ar231x_check_link(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ u16 phyData;
-+
-+ phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
-+ if (sp->phyData != phyData) {
-+ if (phyData & BMSR_LSTATUS) {
-+ /* link is present, ready link partner ability to deterine
-+ duplexity */
-+ int duplex = 0;
-+ u16 reg;
-+
-+ sp->link = 1;
-+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
-+ if (reg & BMCR_ANENABLE) {
-+ /* auto neg enabled */
-+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
-+ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
-+ } else {
-+ /* no auto neg, just read duplex config */
-+ duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
-+ }
-+
-+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
-+ dev->name, (duplex) ? "full" : "half");
-+
-+ if (duplex) {
-+ /* full duplex */
-+ sp->eth_regs->mac_control =
-+ ((sp->eth_regs->
-+ mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
-+ } else {
-+ /* half duplex */
-+ sp->eth_regs->mac_control =
-+ ((sp->eth_regs->
-+ mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
-+ }
-+ } else {
-+ /* no link */
-+ sp->link = 0;
-+ }
-+ sp->phyData = phyData;
-+ }
-+}
-+
-+static int ar231x_reset_reg(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int ethsal, ethsah;
-+ unsigned int flags;
-+
-+ *sp->int_regs |= sp->cfg->reset_mac;
-+ mdelay(10);
-+ *sp->int_regs &= ~sp->cfg->reset_mac;
-+ mdelay(10);
-+ *sp->int_regs |= sp->cfg->reset_phy;
-+ mdelay(10);
-+ *sp->int_regs &= ~sp->cfg->reset_phy;
-+ mdelay(10);
-+
-+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
-+ mdelay(10);
-+ sp->dma_regs->bus_mode =
-+ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-+
-+ /* enable interrupts */
-+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
-+ DMA_STATUS_NIS |
-+ DMA_STATUS_RI |
-+ DMA_STATUS_TI | DMA_STATUS_FBE);
-+ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
-+ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
-+ sp->dma_regs->control =
-+ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-+
-+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
-+ sp->eth_regs->vlan_tag = (0x8100);
-+
-+ /* Enable Ethernet Interface */
-+ flags = (MAC_CONTROL_TE | /* transmit enable */
-+ MAC_CONTROL_PM | /* pass mcast */
-+ MAC_CONTROL_F | /* full duplex */
-+ MAC_CONTROL_HBD); /* heart beat disabled */
-+
-+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
-+ flags |= MAC_CONTROL_PR;
-+ }
-+ sp->eth_regs->mac_control = flags;
-+
-+ /* Set all Ethernet station address registers to their initial values */
-+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-+
-+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-+
-+ sp->eth_regs->mac_addr[0] = ethsah;
-+ sp->eth_regs->mac_addr[1] = ethsal;
-+
-+ mdelay(10);
-+
-+ return (0);
-+}
-+
-+
-+static int ar231x_init(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int ecode = 0;
-+
-+ /*
-+ * Allocate descriptors
-+ */
-+ if (ar231x_allocate_descriptors(dev)) {
-+ printk("%s: %s: ar231x_allocate_descriptors failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+
-+ /*
-+ * Get the memory for the skb rings.
-+ */
-+ if (sp->rx_skb == NULL) {
-+ sp->rx_skb =
-+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+ GFP_KERNEL);
-+ if (!(sp->rx_skb)) {
-+ printk("%s: %s: rx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ if (sp->tx_skb == NULL) {
-+ sp->tx_skb =
-+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
-+ GFP_KERNEL);
-+ if (!(sp->tx_skb)) {
-+ printk("%s: %s: tx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ /*
-+ * Set tx_csm before we start receiving interrupts, otherwise
-+ * the interrupt handler might think it is supposed to process
-+ * tx ints before we are up and running, which may cause a null
-+ * pointer access in the int handler.
-+ */
-+ sp->rx_skbprd = 0;
-+ sp->cur_rx = 0;
-+ sp->tx_prd = 0;
-+ sp->tx_csm = 0;
-+
-+ /*
-+ * Zero the stats before starting the interface
-+ */
-+ memset(&dev->stats, 0, sizeof(dev->stats));
-+
-+ /*
-+ * We load the ring here as there seem to be no way to tell the
-+ * firmware to wipe the ring without re-initializing it.
-+ */
-+ ar231x_load_rx_ring(dev, RX_RING_SIZE);
-+
-+ /*
-+ * Init hardware
-+ */
-+ ar231x_reset_reg(dev);
-+
-+ /*
-+ * Get the IRQ
-+ */
-+ ecode =
-+ request_irq(dev->irq, &ar231x_interrupt,
-+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-+ dev->name, dev);
-+ if (ecode) {
-+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
-+ dev->name, __FUNCTION__, dev->irq);
-+ goto init_error;
-+ }
-+
-+
-+ tasklet_enable(&sp->rx_tasklet);
-+
-+ return 0;
-+
-+ init_error:
-+ ar231x_init_cleanup(dev);
-+ return ecode;
-+}
-+
-+/*
-+ * Load the rx ring.
-+ *
-+ * Loading rings is safe without holding the spin lock since this is
-+ * done only before the device is enabled, thus no interrupts are
-+ * generated and by the interrupt handler/tasklet handler.
-+ */
-+static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs)
-+{
-+
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ short i, idx;
-+
-+ idx = sp->rx_skbprd;
-+
-+ for (i = 0; i < nr_bufs; i++) {
-+ struct sk_buff *skb;
-+ ar231x_descr_t *rd;
-+
-+ if (sp->rx_skb[idx])
-+ break;
-+
-+ skb = netdev_alloc_skb(dev, AR2313_BUFSIZE);
-+ if (!skb) {
-+ printk("\n\n\n\n %s: No memory in system\n\n\n\n",
-+ __FUNCTION__);
-+ break;
-+ }
-+
-+ /*
-+ * Make sure IP header starts on a fresh cache line.
-+ */
-+ skb->dev = dev;
-+ skb_reserve(skb, RX_OFFSET);
-+ sp->rx_skb[idx] = skb;
-+
-+ rd = (ar231x_descr_t *) & sp->rx_ring[idx];
-+
-+ /* initialize dma descriptor */
-+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rd->addr = virt_to_phys(skb->data);
-+ rd->descr =
-+ virt_to_phys(&sp->
-+ rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
-+ rd->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ if (i)
-+ sp->rx_skbprd = idx;
-+
-+ return;
-+}
-+
-+#define AR2313_MAX_PKTS_PER_CALL 64
-+
-+static int ar231x_rx_int(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ struct sk_buff *skb, *skb_new;
-+ ar231x_descr_t *rxdesc;
-+ unsigned int status;
-+ u32 idx;
-+ int pkts = 0;
-+ int rval;
-+
-+ idx = sp->cur_rx;
-+
-+ /* process at most the entire ring and then wait for another interrupt
-+ */
-+ while (1) {
-+
-+ rxdesc = &sp->rx_ring[idx];
-+ status = rxdesc->status;
-+ if (status & DMA_RX_OWN) {
-+ /* SiByte owns descriptor or descr not yet filled in */
-+ rval = 0;
-+ break;
-+ }
-+
-+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
-+ rval = 1;
-+ break;
-+ }
-+
-+ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
-+ dev->stats.rx_errors++;
-+ dev->stats.rx_dropped++;
-+
-+ /* add statistics counters */
-+ if (status & DMA_RX_ERR_CRC)
-+ dev->stats.rx_crc_errors++;
-+ if (status & DMA_RX_ERR_COL)
-+ dev->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_LENGTH)
-+ dev->stats.rx_length_errors++;
-+ if (status & DMA_RX_ERR_RUNT)
-+ dev->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_DESC)
-+ dev->stats.rx_over_errors++;
-+
-+ } else {
-+ /* alloc new buffer. */
-+ skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
-+ if (skb_new != NULL) {
-+
-+ skb = sp->rx_skb[idx];
-+ /* set skb */
-+ skb_put(skb,
-+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
-+
-+ dev->stats.rx_bytes += skb->len;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ /* pass the packet to upper layers */
-+ netif_rx(skb);
-+
-+ skb_new->dev = dev;
-+ /* 16 bit align */
-+ skb_reserve(skb_new, RX_OFFSET);
-+ /* reset descriptor's curr_addr */
-+ rxdesc->addr = virt_to_phys(skb_new->data);
-+
-+ dev->stats.rx_packets++;
-+ sp->rx_skb[idx] = skb_new;
-+ } else {
-+ dev->stats.rx_dropped++;
-+ }
-+ }
-+
-+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rxdesc->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ sp->cur_rx = idx;
-+
-+ return rval;
-+}
-+
-+
-+static void ar231x_tx_int(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ u32 idx;
-+ struct sk_buff *skb;
-+ ar231x_descr_t *txdesc;
-+ unsigned int status = 0;
-+
-+ idx = sp->tx_csm;
-+
-+ while (idx != sp->tx_prd) {
-+ txdesc = &sp->tx_ring[idx];
-+
-+ if ((status = txdesc->status) & DMA_TX_OWN) {
-+ /* ar231x dma still owns descr */
-+ break;
-+ }
-+ /* done with this descriptor */
-+ dma_unmap_single(NULL, txdesc->addr,
-+ txdesc->devcs & DMA_TX1_BSIZE_MASK,
-+ DMA_TO_DEVICE);
-+ txdesc->status = 0;
-+
-+ if (status & DMA_TX_ERROR) {
-+ dev->stats.tx_errors++;
-+ dev->stats.tx_dropped++;
-+ if (status & DMA_TX_ERR_UNDER)
-+ dev->stats.tx_fifo_errors++;
-+ if (status & DMA_TX_ERR_HB)
-+ dev->stats.tx_heartbeat_errors++;
-+ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
-+ dev->stats.tx_carrier_errors++;
-+ if (status & (DMA_TX_ERR_LATE |
-+ DMA_TX_ERR_COL |
-+ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
-+ dev->stats.tx_aborted_errors++;
-+ } else {
-+ /* transmit OK */
-+ dev->stats.tx_packets++;
-+ }
-+
-+ skb = sp->tx_skb[idx];
-+ sp->tx_skb[idx] = NULL;
-+ idx = DSC_NEXT(idx);
-+ dev->stats.tx_bytes += skb->len;
-+ dev_kfree_skb_irq(skb);
-+ }
-+
-+ sp->tx_csm = idx;
-+
-+ return;
-+}
-+
-+
-+static void rx_tasklet_func(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ if (sp->unloading) {
-+ return;
-+ }
-+
-+ if (ar231x_rx_int(dev)) {
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+ } else {
-+ unsigned long flags;
-+ spin_lock_irqsave(&sp->lock, flags);
-+ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+ }
-+}
-+
-+static void rx_schedule(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+
-+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-+
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+}
-+
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int status, enabled;
-+
-+ /* clear interrupt */
-+ /*
-+ * Don't clear RI bit if currently disabled.
-+ */
-+ status = sp->dma_regs->status;
-+ enabled = sp->dma_regs->intr_ena;
-+ sp->dma_regs->status = status & enabled;
-+
-+ if (status & DMA_STATUS_NIS) {
-+ /* normal status */
-+ /*
-+ * Don't schedule rx processing if interrupt
-+ * is already disabled.
-+ */
-+ if (status & enabled & DMA_STATUS_RI) {
-+ /* receive interrupt */
-+ rx_schedule(dev);
-+ }
-+ if (status & DMA_STATUS_TI) {
-+ /* transmit interrupt */
-+ ar231x_tx_int(dev);
-+ }
-+ }
-+
-+ /* abnormal status */
-+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
-+ ar231x_restart(dev);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int ar231x_open(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int ethsal, ethsah;
-+
-+ /* reset the hardware, in case the MAC address changed */
-+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
-+
-+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
-+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
-+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
-+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
-+
-+ sp->eth_regs->mac_addr[0] = ethsah;
-+ sp->eth_regs->mac_addr[1] = ethsal;
-+
-+ mdelay(10);
-+
-+ dev->mtu = 1500;
-+ netif_start_queue(dev);
-+
-+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-+
-+ return 0;
-+}
-+
-+static void ar231x_tx_timeout(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&sp->lock, flags);
-+ ar231x_restart(dev);
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+}
-+
-+static void ar231x_halt(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int j;
-+
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ /* kill the MAC */
-+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
-+ MAC_CONTROL_TE); /* disable Transmits */
-+ /* stop dma */
-+ sp->dma_regs->control = 0;
-+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-+
-+ /* place phy and MAC in reset */
-+ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
-+
-+ /* free buffers on tx ring */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ struct sk_buff *skb;
-+ ar231x_descr_t *txdesc;
-+
-+ txdesc = &sp->tx_ring[j];
-+ txdesc->descr = 0;
-+
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ dev_kfree_skb(skb);
-+ sp->tx_skb[j] = NULL;
-+ }
-+ }
-+}
-+
-+/*
-+ * close should do nothing. Here's why. It's called when
-+ * 'ifconfig bond0 down' is run. If it calls free_irq then
-+ * the irq is gone forever ! When bond0 is made 'up' again,
-+ * the ar231x_open () does not call request_irq (). Worse,
-+ * the call to ar231x_halt() generates a WDOG reset due to
-+ * the write to 'sp->int_regs' and the box reboots.
-+ * Commenting this out is good since it allows the
-+ * system to resume when bond0 is made up again.
-+ */
-+static int ar231x_close(struct net_device *dev)
-+{
-+#if 0
-+ /*
-+ * Disable interrupts
-+ */
-+ disable_irq(dev->irq);
-+
-+ /*
-+ * Without (or before) releasing irq and stopping hardware, this
-+ * is an absolute non-sense, by the way. It will be reset instantly
-+ * by the first irq.
-+ */
-+ netif_stop_queue(dev);
-+
-+ /* stop the MAC and DMA engines */
-+ ar231x_halt(dev);
-+
-+ /* release the interrupt */
-+ free_irq(dev->irq, dev);
-+
-+#endif
-+ return 0;
-+}
-+
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ ar231x_descr_t *td;
-+ u32 idx;
-+
-+ idx = sp->tx_prd;
-+ td = &sp->tx_ring[idx];
-+
-+ if (td->status & DMA_TX_OWN) {
-+ /* free skbuf and lie to the caller that we sent it out */
-+ dev->stats.tx_dropped++;
-+ dev_kfree_skb(skb);
-+
-+ /* restart transmitter in case locked */
-+ sp->dma_regs->xmt_poll = 0;
-+ return 0;
-+ }
-+
-+ /* Setup the transmit descriptor. */
-+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
-+ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
-+ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+ td->status = DMA_TX_OWN;
-+
-+ /* kick transmitter last */
-+ sp->dma_regs->xmt_poll = 0;
-+
-+ sp->tx_skb[idx] = skb;
-+ idx = DSC_NEXT(idx);
-+ sp->tx_prd = idx;
-+
-+ return 0;
-+}
-+
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ int ret;
-+
-+ switch (cmd) {
-+
-+ case SIOCETHTOOL:
-+ spin_lock_irq(&sp->lock);
-+ ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
-+ spin_unlock_irq(&sp->lock);
-+ return ret;
-+
-+ case SIOCSIFHWADDR:
-+ if (copy_from_user
-+ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case SIOCGIFHWADDR:
-+ if (copy_to_user
-+ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case SIOCGMIIPHY:
-+ case SIOCGMIIREG:
-+ case SIOCSMIIREG:
-+ return phy_mii_ioctl(sp->phy_dev, data, cmd);
-+
-+ default:
-+ break;
-+ }
-+
-+ return -EOPNOTSUPP;
-+}
-+
-+static void ar231x_adjust_link(struct net_device *dev)
-+{
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ unsigned int mc;
-+
-+ if (!sp->phy_dev->link)
-+ return;
-+
-+ if (sp->phy_dev->duplex != sp->oldduplex) {
-+ mc = readl(&sp->eth_regs->mac_control);
-+ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
-+ if (sp->phy_dev->duplex)
-+ mc |= MAC_CONTROL_F;
-+ else
-+ mc |= MAC_CONTROL_DRO;
-+ writel(mc, &sp->eth_regs->mac_control);
-+ sp->oldduplex = sp->phy_dev->duplex;
-+ }
-+}
-+
-+#define MII_ADDR(phy, reg) \
-+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
-+
-+static int
-+ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
-+{
-+ struct net_device *const dev = bus->priv;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-+
-+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ return (ethernet->mii_data >> MII_DATA_SHIFT);
-+}
-+
-+static int
-+ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
-+ u16 value)
-+{
-+ struct net_device *const dev = bus->priv;
-+ struct ar231x_private *sp = netdev_priv(dev);
-+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
-+
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ ethernet->mii_data = value << MII_DATA_SHIFT;
-+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
-+
-+ return 0;
-+}
-+
-+static int ar231x_mdiobus_reset(struct mii_bus *bus)
-+{
-+ struct net_device *const dev = bus->priv;
-+
-+ ar231x_reset_reg(dev);
-+
-+ return 0;
-+}
-+
-+static int ar231x_mdiobus_probe (struct net_device *dev)
-+{
-+ struct ar231x_private *const sp = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ int phy_addr;
-+
-+ /* find the first (lowest address) PHY on the current MAC's MII bus */
-+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
-+ if (sp->mii_bus->phy_map[phy_addr]) {
-+ phydev = sp->mii_bus->phy_map[phy_addr];
-+ sp->phy = phy_addr;
-+ break; /* break out with first one found */
-+ }
-+
-+ if (!phydev) {
-+ printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name);
-+ return -1;
-+ }
-+
-+ /* now we are supposed to have a proper phydev, to attach to... */
-+ BUG_ON(!phydev);
-+ BUG_ON(phydev->attached_dev);
-+
-+ phydev = phy_connect(dev, dev_name(&phydev->dev), &ar231x_adjust_link, 0,
-+ PHY_INTERFACE_MODE_MII);
-+
-+ if (IS_ERR(phydev)) {
-+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+ return PTR_ERR(phydev);
-+ }
-+
-+ /* mask with MAC supported features */
-+ phydev->supported &= (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_Autoneg
-+ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
-+
-+ phydev->advertising = phydev->supported;
-+
-+ sp->oldduplex = -1;
-+ sp->phy_dev = phydev;
-+
-+ printk(KERN_INFO "%s: attached PHY driver [%s] "
-+ "(mii_bus:phy_addr=%s)\n",
-+ dev->name, phydev->drv->name, dev_name(&phydev->dev));
-+
-+ return 0;
-+}
-+
---- /dev/null
-+++ b/drivers/net/ar231x.h
-@@ -0,0 +1,302 @@
-+/*
-+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef _AR2313_H_
-+#define _AR2313_H_
-+
-+#include <generated/autoconf.h>
-+#include <linux/bitops.h>
-+#include <asm/bootinfo.h>
-+#include <ar231x_platform.h>
-+
-+/*
-+ * probe link timer - 5 secs
-+ */
-+#define LINK_TIMER (5*HZ)
-+
-+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
-+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
-+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
-+
-+#define AR2313_TX_TIMEOUT (HZ/4)
-+
-+/*
-+ * Rings
-+ */
-+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
-+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
-+
-+#define AR2313_MBGET 2
-+#define AR2313_MBSET 3
-+#define AR2313_PCI_RECONFIG 4
-+#define AR2313_PCI_DUMP 5
-+#define AR2313_TEST_PANIC 6
-+#define AR2313_TEST_NULLPTR 7
-+#define AR2313_READ_DATA 8
-+#define AR2313_WRITE_DATA 9
-+#define AR2313_GET_VERSION 10
-+#define AR2313_TEST_HANG 11
-+#define AR2313_SYNC 12
-+
-+#define DMA_RX_ERR_CRC BIT(1)
-+#define DMA_RX_ERR_DRIB BIT(2)
-+#define DMA_RX_ERR_MII BIT(3)
-+#define DMA_RX_EV2 BIT(5)
-+#define DMA_RX_ERR_COL BIT(6)
-+#define DMA_RX_LONG BIT(7)
-+#define DMA_RX_LS BIT(8) /* last descriptor */
-+#define DMA_RX_FS BIT(9) /* first descriptor */
-+#define DMA_RX_MF BIT(10) /* multicast frame */
-+#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */
-+#define DMA_RX_ERR_LENGTH BIT(12) /* length error */
-+#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */
-+#define DMA_RX_ERROR BIT(15) /* error summary */
-+#define DMA_RX_LEN_MASK 0x3fff0000
-+#define DMA_RX_LEN_SHIFT 16
-+#define DMA_RX_FILT BIT(30)
-+#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */
-+
-+#define DMA_RX1_BSIZE_MASK 0x000007ff
-+#define DMA_RX1_BSIZE_SHIFT 0
-+#define DMA_RX1_CHAINED BIT(24)
-+#define DMA_RX1_RER BIT(25)
-+
-+#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */
-+#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */
-+#define DMA_TX_COL_MASK 0x78
-+#define DMA_TX_COL_SHIFT 3
-+#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */
-+#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */
-+#define DMA_TX_ERR_LATE BIT(9) /* late collision */
-+#define DMA_TX_ERR_LINK BIT(10) /* no carrier */
-+#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */
-+#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */
-+#define DMA_TX_ERROR BIT(15) /* frame aborted */
-+#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */
-+
-+#define DMA_TX1_BSIZE_MASK 0x000007ff
-+#define DMA_TX1_BSIZE_SHIFT 0
-+#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */
-+#define DMA_TX1_TER BIT(25) /* transmit end of ring */
-+#define DMA_TX1_FS BIT(29) /* first segment */
-+#define DMA_TX1_LS BIT(30) /* last segment */
-+#define DMA_TX1_IC BIT(31) /* interrupt on completion */
-+
-+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
-+
-+#define MAC_CONTROL_RE BIT(2) /* receive enable */
-+#define MAC_CONTROL_TE BIT(3) /* transmit enable */
-+#define MAC_CONTROL_DC BIT(5) /* Deferral check */
-+#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */
-+#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */
-+#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */
-+#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */
-+#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */
-+#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */
-+#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */
-+#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */
-+#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */
-+#define MAC_CONTROL_PR BIT(18) /* promiscuous mode (valid frames only) */
-+#define MAC_CONTROL_PM BIT(19) /* pass multicast */
-+#define MAC_CONTROL_F BIT(20) /* full-duplex */
-+#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */
-+#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */
-+#define MAC_CONTROL_BLE BIT(30) /* big endian mode */
-+#define MAC_CONTROL_RA BIT(31) /* receive all (valid and invalid frames) */
-+
-+#define MII_ADDR_BUSY BIT(0)
-+#define MII_ADDR_WRITE BIT(1)
-+#define MII_ADDR_REG_SHIFT 6
-+#define MII_ADDR_PHY_SHIFT 11
-+#define MII_DATA_SHIFT 0
-+
-+#define FLOW_CONTROL_FCE BIT(1)
-+
-+#define DMA_BUS_MODE_SWR BIT(0) /* software reset */
-+#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */
-+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
-+#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */
-+
-+#define DMA_STATUS_TI BIT(0) /* transmit interrupt */
-+#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */
-+#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */
-+#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */
-+#define DMA_STATUS_UNF BIT(5) /* transmit underflow */
-+#define DMA_STATUS_RI BIT(6) /* receive interrupt */
-+#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */
-+#define DMA_STATUS_RPS BIT(8) /* receive process stopped */
-+#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */
-+#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */
-+#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */
-+#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */
-+#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */
-+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
-+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
-+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
-+
-+#define DMA_CONTROL_SR BIT(1) /* start receive */
-+#define DMA_CONTROL_ST BIT(13) /* start transmit */
-+#define DMA_CONTROL_SF BIT(21) /* store and forward */
-+
-+
-+typedef struct {
-+ volatile unsigned int status; // OWN, Device control and status.
-+ volatile unsigned int devcs; // pkt Control bits + Length
-+ volatile unsigned int addr; // Current Address.
-+ volatile unsigned int descr; // Next descriptor in chain.
-+} ar231x_descr_t;
-+
-+
-+
-+//
-+// New Combo structure for Both Eth0 AND eth1
-+//
-+typedef struct {
-+ volatile unsigned int mac_control; /* 0x00 */
-+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */
-+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
-+ volatile unsigned int mii_addr; /* 0x14 */
-+ volatile unsigned int mii_data; /* 0x18 */
-+ volatile unsigned int flow_control; /* 0x1c */
-+ volatile unsigned int vlan_tag; /* 0x20 */
-+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
-+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
-+
-+} ETHERNET_STRUCT;
-+
-+/********************************************************************
-+ * Interrupt controller
-+ ********************************************************************/
-+
-+typedef struct {
-+ volatile unsigned int wdog_control; /* 0x08 */
-+ volatile unsigned int wdog_timer; /* 0x0c */
-+ volatile unsigned int misc_status; /* 0x10 */
-+ volatile unsigned int misc_mask; /* 0x14 */
-+ volatile unsigned int global_status; /* 0x18 */
-+ volatile unsigned int reserved; /* 0x1c */
-+ volatile unsigned int reset_control; /* 0x20 */
-+} INTERRUPT;
-+
-+/********************************************************************
-+ * DMA controller
-+ ********************************************************************/
-+typedef struct {
-+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
-+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
-+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
-+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
-+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
-+ volatile unsigned int status; /* 0x14 (CSR5) */
-+ volatile unsigned int control; /* 0x18 (CSR6) */
-+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
-+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
-+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
-+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
-+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
-+} DMA;
-+
-+/*
-+ * Struct private for the Sibyte.
-+ *
-+ * Elements are grouped so variables used by the tx handling goes
-+ * together, and will go into the same cache lines etc. in order to
-+ * avoid cache line contention between the rx and tx handling on SMP.
-+ *
-+ * Frequently accessed variables are put at the beginning of the
-+ * struct to help the compiler generate better/shorter code.
-+ */
-+struct ar231x_private {
-+ struct net_device *dev;
-+ int version;
-+ u32 mb[2];
-+
-+ volatile ETHERNET_STRUCT *phy_regs;
-+ volatile ETHERNET_STRUCT *eth_regs;
-+ volatile DMA *dma_regs;
-+ volatile u32 *int_regs;
-+ struct ar231x_eth *cfg;
-+
-+ spinlock_t lock; /* Serialise access to device */
-+
-+ /*
-+ * RX and TX descriptors, must be adjacent
-+ */
-+ ar231x_descr_t *rx_ring;
-+ ar231x_descr_t *tx_ring;
-+
-+
-+ struct sk_buff **rx_skb;
-+ struct sk_buff **tx_skb;
-+
-+ /*
-+ * RX elements
-+ */
-+ u32 rx_skbprd;
-+ u32 cur_rx;
-+
-+ /*
-+ * TX elements
-+ */
-+ u32 tx_prd;
-+ u32 tx_csm;
-+
-+ /*
-+ * Misc elements
-+ */
-+ char name[48];
-+ struct {
-+ u32 address;
-+ u32 length;
-+ char *mapping;
-+ } desc;
-+
-+
-+ struct timer_list link_timer;
-+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
-+ unsigned short mac;
-+ unsigned short link; /* 0 - link down, 1 - link up */
-+ u16 phyData;
-+
-+ struct tasklet_struct rx_tasklet;
-+ int unloading;
-+
-+ struct phy_device *phy_dev;
-+ struct mii_bus *mii_bus;
-+ int oldduplex;
-+};
-+
-+
-+/*
-+ * Prototypes
-+ */
-+static int ar231x_init(struct net_device *dev);
-+#ifdef TX_TIMEOUT
-+static void ar231x_tx_timeout(struct net_device *dev);
-+#endif
-+static int ar231x_restart(struct net_device *dev);
-+static void ar231x_load_rx_ring(struct net_device *dev, int bufs);
-+static irqreturn_t ar231x_interrupt(int irq, void *dev_id);
-+static int ar231x_open(struct net_device *dev);
-+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static int ar231x_close(struct net_device *dev);
-+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr,
-+ int cmd);
-+static void ar231x_init_cleanup(struct net_device *dev);
-+static int ar231x_setup_timer(struct net_device *dev);
-+static void ar231x_link_timer_fn(unsigned long data);
-+static void ar231x_check_link(struct net_device *dev);
-+#endif /* _AR2313_H_ */
diff --git a/target/linux/atheros/patches-2.6.36/120-spiflash.patch b/target/linux/atheros/patches-2.6.36/120-spiflash.patch
deleted file mode 100644
index 8e37146497..0000000000
--- a/target/linux/atheros/patches-2.6.36/120-spiflash.patch
+++ /dev/null
@@ -1,659 +0,0 @@
---- a/drivers/mtd/devices/Kconfig
-+++ b/drivers/mtd/devices/Kconfig
-@@ -112,6 +112,10 @@ config MTD_SST25L
- Set up your spi devices with the right board-specific platform data,
- if you want to specify device partitioning.
-
-+config MTD_AR2315
-+ tristate "Atheros AR2315+ SPI Flash support"
-+ depends on ATHEROS_AR2315
-+
- config MTD_SLRAM
- tristate "Uncached system RAM"
- help
---- a/drivers/mtd/devices/Makefile
-+++ b/drivers/mtd/devices/Makefile
-@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
- obj-$(CONFIG_MTD_SST25L) += sst25l.o
-+obj-$(CONFIG_MTD_AR2315) += ar2315.o
---- /dev/null
-+++ b/drivers/mtd/devices/ar2315.c
-@@ -0,0 +1,517 @@
-+
-+/*
-+ * MTD driver for the SPI Flash Memory support on Atheros AR2315
-+ *
-+ * Copyright (c) 2005-2006 Atheros Communications Inc.
-+ * Copyright (C) 2006-2007 FON Technology, SL.
-+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/platform_device.h>
-+#include <linux/sched.h>
-+#include <linux/root_dev.h>
-+#include <linux/delay.h>
-+#include <asm/delay.h>
-+#include <asm/io.h>
-+
-+#include <ar2315_spiflash.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+
-+
-+#define SPIFLASH "spiflash: "
-+#define busy_wait(_priv, _condition, _wait) do { \
-+ while (_condition) { \
-+ spin_unlock_bh(&_priv->lock); \
-+ if (_wait > 1) \
-+ msleep(_wait); \
-+ else if ((_wait == 1) && need_resched()) \
-+ schedule(); \
-+ else \
-+ udelay(1); \
-+ spin_lock_bh(&_priv->lock); \
-+ } \
-+} while (0)
-+
-+enum {
-+ FLASH_NONE,
-+ FLASH_1MB,
-+ FLASH_2MB,
-+ FLASH_4MB,
-+ FLASH_8MB,
-+ FLASH_16MB,
-+};
-+
-+/* Flash configuration table */
-+struct flashconfig {
-+ u32 byte_cnt;
-+ u32 sector_cnt;
-+ u32 sector_size;
-+};
-+
-+const struct flashconfig flashconfig_tbl[] = {
-+ [FLASH_NONE] = { 0, 0, 0},
-+ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE},
-+ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE},
-+ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE},
-+ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE},
-+ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE}
-+};
-+
-+/* Mapping of generic opcodes to STM serial flash opcodes */
-+enum {
-+ SPI_WRITE_ENABLE,
-+ SPI_WRITE_DISABLE,
-+ SPI_RD_STATUS,
-+ SPI_WR_STATUS,
-+ SPI_RD_DATA,
-+ SPI_FAST_RD_DATA,
-+ SPI_PAGE_PROGRAM,
-+ SPI_SECTOR_ERASE,
-+ SPI_BULK_ERASE,
-+ SPI_DEEP_PWRDOWN,
-+ SPI_RD_SIG,
-+};
-+
-+struct opcodes {
-+ __u16 code;
-+ __s8 tx_cnt;
-+ __s8 rx_cnt;
-+};
-+const struct opcodes stm_opcodes[] = {
-+ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0},
-+ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0},
-+ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1},
-+ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0},
-+ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4},
-+ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0},
-+ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0},
-+ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0},
-+ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0},
-+ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0},
-+ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1},
-+};
-+
-+/* Driver private data structure */
-+struct spiflash_priv {
-+ struct mtd_info mtd;
-+ void *readaddr; /* memory mapped data for read */
-+ void *mmraddr; /* memory mapped register space */
-+ wait_queue_head_t wq;
-+ spinlock_t lock;
-+ int state;
-+};
-+
-+#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd)
-+
-+enum {
-+ FL_READY,
-+ FL_READING,
-+ FL_ERASING,
-+ FL_WRITING
-+};
-+
-+/***************************************************************************************************/
-+
-+static u32
-+spiflash_read_reg(struct spiflash_priv *priv, int reg)
-+{
-+ return ar231x_read_reg((u32) priv->mmraddr + reg);
-+}
-+
-+static void
-+spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data)
-+{
-+ ar231x_write_reg((u32) priv->mmraddr + reg, data);
-+}
-+
-+static u32
-+spiflash_wait_busy(struct spiflash_priv *priv)
-+{
-+ u32 reg;
-+
-+ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) &
-+ SPI_CTL_BUSY, 0);
-+ return reg;
-+}
-+
-+static u32
-+spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr)
-+{
-+ const struct opcodes *op;
-+ u32 reg, mask;
-+
-+ op = &stm_opcodes[opcode];
-+ reg = spiflash_wait_busy(priv);
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE,
-+ ((u32) op->code) | (addr << 8));
-+
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4);
-+
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+ spiflash_wait_busy(priv);
-+
-+ if (!op->rx_cnt)
-+ return 0;
-+
-+ reg = spiflash_read_reg(priv, SPI_FLASH_DATA);
-+
-+ switch (op->rx_cnt) {
-+ case 1:
-+ mask = 0x000000ff;
-+ break;
-+ case 2:
-+ mask = 0x0000ffff;
-+ break;
-+ case 3:
-+ mask = 0x00ffffff;
-+ break;
-+ default:
-+ mask = 0xffffffff;
-+ break;
-+ }
-+ reg &= mask;
-+
-+ return reg;
-+}
-+
-+
-+/*
-+ * Probe SPI flash device
-+ * Function returns 0 for failure.
-+ * and flashconfig_tbl array index for success.
-+ */
-+static int
-+spiflash_probe_chip (struct spiflash_priv *priv)
-+{
-+ u32 sig;
-+ int flash_size;
-+
-+ /* Read the signature on the flash device */
-+ spin_lock_bh(&priv->lock);
-+ sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0);
-+ spin_unlock_bh(&priv->lock);
-+
-+ switch (sig) {
-+ case STM_8MBIT_SIGNATURE:
-+ flash_size = FLASH_1MB;
-+ break;
-+ case STM_16MBIT_SIGNATURE:
-+ flash_size = FLASH_2MB;
-+ break;
-+ case STM_32MBIT_SIGNATURE:
-+ flash_size = FLASH_4MB;
-+ break;
-+ case STM_64MBIT_SIGNATURE:
-+ flash_size = FLASH_8MB;
-+ break;
-+ case STM_128MBIT_SIGNATURE:
-+ flash_size = FLASH_16MB;
-+ break;
-+ default:
-+ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
-+ return 0;
-+ }
-+
-+ return flash_size;
-+}
-+
-+
-+/* wait until the flash chip is ready and grab a lock */
-+static int spiflash_wait_ready(struct spiflash_priv *priv, int state)
-+{
-+ DECLARE_WAITQUEUE(wait, current);
-+
-+retry:
-+ spin_lock_bh(&priv->lock);
-+ if (priv->state != FL_READY) {
-+ set_current_state(TASK_UNINTERRUPTIBLE);
-+ add_wait_queue(&priv->wq, &wait);
-+ spin_unlock_bh(&priv->lock);
-+ schedule();
-+ remove_wait_queue(&priv->wq, &wait);
-+
-+ if(signal_pending(current))
-+ return 0;
-+
-+ goto retry;
-+ }
-+ priv->state = state;
-+
-+ return 1;
-+}
-+
-+static inline void spiflash_done(struct spiflash_priv *priv)
-+{
-+ priv->state = FL_READY;
-+ spin_unlock_bh(&priv->lock);
-+ wake_up(&priv->wq);
-+}
-+
-+static void
-+spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout)
-+{
-+ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) &
-+ SPI_STATUS_WIP, timeout);
-+ spiflash_done(priv);
-+}
-+
-+
-+
-+static int
-+spiflash_erase (struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ const struct opcodes *op;
-+ u32 temp, reg;
-+
-+ if (instr->addr + instr->len > mtd->size)
-+ return -EINVAL;
-+
-+ if (!spiflash_wait_ready(priv, FL_ERASING))
-+ return -EINTR;
-+
-+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+ reg = spiflash_wait_busy(priv);
-+
-+ op = &stm_opcodes[SPI_SECTOR_ERASE];
-+ temp = ((u32)instr->addr << 8) | (u32)(op->code);
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp);
-+
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= op->tx_cnt | SPI_CTL_START;
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+ spiflash_wait_complete(priv, 20);
-+
-+ instr->state = MTD_ERASE_DONE;
-+ mtd_erase_callback(instr);
-+
-+ return 0;
-+}
-+
-+static int
-+spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ u8 *read_addr;
-+
-+ if (!len)
-+ return 0;
-+
-+ if (from + len > mtd->size)
-+ return -EINVAL;
-+
-+ *retlen = len;
-+
-+ if (!spiflash_wait_ready(priv, FL_READING))
-+ return -EINTR;
-+
-+ read_addr = (u8 *)(priv->readaddr + from);
-+ memcpy_fromio(buf, read_addr, len);
-+ spiflash_done(priv);
-+
-+ return 0;
-+}
-+
-+static int
-+spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf)
-+{
-+ struct spiflash_priv *priv = to_spiflash(mtd);
-+ u32 opcode, bytes_left;
-+
-+ *retlen = 0;
-+
-+ if (!len)
-+ return 0;
-+
-+ if (to + len > mtd->size)
-+ return -EINVAL;
-+
-+ bytes_left = len;
-+
-+ do {
-+ u32 read_len, reg, page_offset, spi_data = 0;
-+
-+ read_len = min(bytes_left, sizeof(u32));
-+
-+ /* 32-bit writes cannot span across a page boundary
-+ * (256 bytes). This types of writes require two page
-+ * program operations to handle it correctly. The STM part
-+ * will write the overflow data to the beginning of the
-+ * current page as opposed to the subsequent page.
-+ */
-+ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len;
-+
-+ if (page_offset > STM_PAGE_SIZE)
-+ read_len -= (page_offset - STM_PAGE_SIZE);
-+
-+ if (!spiflash_wait_ready(priv, FL_WRITING))
-+ return -EINTR;
-+
-+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0);
-+ spi_data = 0;
-+ switch (read_len) {
-+ case 4:
-+ spi_data |= buf[3] << 24;
-+ /* fall through */
-+ case 3:
-+ spi_data |= buf[2] << 16;
-+ /* fall through */
-+ case 2:
-+ spi_data |= buf[1] << 8;
-+ /* fall through */
-+ case 1:
-+ spi_data |= buf[0] & 0xff;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data);
-+ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code |
-+ (to & 0x00ffffff) << 8;
-+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode);
-+
-+ reg = spiflash_read_reg(priv, SPI_FLASH_CTL);
-+ reg &= ~SPI_CTL_TX_RX_CNT_MASK;
-+ reg |= (read_len + 4) | SPI_CTL_START;
-+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg);
-+
-+ spiflash_wait_complete(priv, 1);
-+
-+ bytes_left -= read_len;
-+ to += read_len;
-+ buf += read_len;
-+
-+ *retlen += read_len;
-+ } while (bytes_left != 0);
-+
-+ return 0;
-+}
-+
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
-+#endif
-+
-+
-+static int
-+spiflash_probe(struct platform_device *pdev)
-+{
-+ struct spiflash_priv *priv;
-+ struct mtd_partition *parts;
-+ struct mtd_info *mtd;
-+ int index, num_parts;
-+ int result = 0;
-+
-+ priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL);
-+ spin_lock_init(&priv->lock);
-+ init_waitqueue_head(&priv->wq);
-+ priv->state = FL_READY;
-+ mtd = &priv->mtd;
-+
-+ priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
-+ if (!priv->mmraddr) {
-+ printk(KERN_WARNING SPIFLASH "Failed to map flash device\n");
-+ goto error;
-+ }
-+
-+ index = spiflash_probe_chip(priv);
-+ if (!index) {
-+ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
-+ goto error;
-+ }
-+
-+ priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
-+ if (!priv->readaddr) {
-+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
-+ goto error;
-+ }
-+
-+ platform_set_drvdata(pdev, priv);
-+ mtd->name = "spiflash";
-+ mtd->type = MTD_NORFLASH;
-+ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
-+ mtd->size = flashconfig_tbl[index].byte_cnt;
-+ mtd->erasesize = flashconfig_tbl[index].sector_size;
-+ mtd->writesize = 1;
-+ mtd->numeraseregions = 0;
-+ mtd->eraseregions = NULL;
-+ mtd->erase = spiflash_erase;
-+ mtd->read = spiflash_read;
-+ mtd->write = spiflash_write;
-+ mtd->owner = THIS_MODULE;
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+ /* parse redboot partitions */
-+ num_parts = parse_mtd_partitions(mtd, part_probe_types, &parts, 0);
-+ if (!num_parts)
-+ goto error;
-+
-+ result = add_mtd_partitions(mtd, parts, num_parts);
-+#endif
-+
-+ return result;
-+
-+error:
-+ if (priv->mmraddr)
-+ iounmap(priv->mmraddr);
-+ kfree(priv);
-+ return -ENXIO;
-+}
-+
-+static int
-+spiflash_remove (struct platform_device *pdev)
-+{
-+ struct spiflash_priv *priv = platform_get_drvdata(pdev);
-+ struct mtd_info *mtd = &priv->mtd;
-+
-+ del_mtd_partitions(mtd);
-+ iounmap(priv->mmraddr);
-+ iounmap(priv->readaddr);
-+ kfree(priv);
-+
-+ return 0;
-+}
-+
-+struct platform_driver spiflash_driver = {
-+ .driver.name = "spiflash",
-+ .probe = spiflash_probe,
-+ .remove = spiflash_remove,
-+};
-+
-+int __init
-+spiflash_init (void)
-+{
-+ return platform_driver_register(&spiflash_driver);
-+}
-+
-+void __exit
-+spiflash_exit (void)
-+{
-+ return platform_driver_unregister(&spiflash_driver);
-+}
-+
-+module_init (spiflash_init);
-+module_exit (spiflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
-+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
-+
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h
-@@ -0,0 +1,116 @@
-+/*
-+ * SPI Flash Memory support header file.
-+ *
-+ * Copyright (c) 2005, Atheros Communications Inc.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This code is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __AR2315_SPIFLASH_H
-+#define __AR2315_SPIFLASH_H
-+
-+#define STM_PAGE_SIZE 256
-+
-+#define SFI_WRITE_BUFFER_SIZE 4
-+#define SFI_FLASH_ADDR_MASK 0x00ffffff
-+
-+#define STM_8MBIT_SIGNATURE 0x13
-+#define STM_M25P80_BYTE_COUNT 1048576
-+#define STM_M25P80_SECTOR_COUNT 16
-+#define STM_M25P80_SECTOR_SIZE 0x10000
-+
-+#define STM_16MBIT_SIGNATURE 0x14
-+#define STM_M25P16_BYTE_COUNT 2097152
-+#define STM_M25P16_SECTOR_COUNT 32
-+#define STM_M25P16_SECTOR_SIZE 0x10000
-+
-+#define STM_32MBIT_SIGNATURE 0x15
-+#define STM_M25P32_BYTE_COUNT 4194304
-+#define STM_M25P32_SECTOR_COUNT 64
-+#define STM_M25P32_SECTOR_SIZE 0x10000
-+
-+#define STM_64MBIT_SIGNATURE 0x16
-+#define STM_M25P64_BYTE_COUNT 8388608
-+#define STM_M25P64_SECTOR_COUNT 128
-+#define STM_M25P64_SECTOR_SIZE 0x10000
-+
-+#define STM_128MBIT_SIGNATURE 0x17
-+#define STM_M25P128_BYTE_COUNT 16777216
-+#define STM_M25P128_SECTOR_COUNT 256
-+#define STM_M25P128_SECTOR_SIZE 0x10000
-+
-+#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT
-+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
-+#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE
-+#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT
-+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
-+#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE
-+#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT
-+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
-+#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE
-+#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT
-+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
-+#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE
-+#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT
-+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
-+#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE
-+
-+/*
-+ * ST Microelectronics Opcodes for Serial Flash
-+ */
-+
-+#define STM_OP_WR_ENABLE 0x06 /* Write Enable */
-+#define STM_OP_WR_DISABLE 0x04 /* Write Disable */
-+#define STM_OP_RD_STATUS 0x05 /* Read Status */
-+#define STM_OP_WR_STATUS 0x01 /* Write Status */
-+#define STM_OP_RD_DATA 0x03 /* Read Data */
-+#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */
-+#define STM_OP_PAGE_PGRM 0x02 /* Page Program */
-+#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */
-+#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */
-+#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */
-+#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */
-+
-+#define STM_STATUS_WIP 0x01 /* Write-In-Progress */
-+#define STM_STATUS_WEL 0x02 /* Write Enable Latch */
-+#define STM_STATUS_BP0 0x04 /* Block Protect 0 */
-+#define STM_STATUS_BP1 0x08 /* Block Protect 1 */
-+#define STM_STATUS_BP2 0x10 /* Block Protect 2 */
-+#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */
-+
-+/*
-+ * SPI Flash Interface Registers
-+ */
-+#define AR531XPLUS_SPI_READ 0x08000000
-+#define AR531XPLUS_SPI_MMR 0x11300000
-+#define AR531XPLUS_SPI_MMR_SIZE 12
-+
-+#define AR531XPLUS_SPI_CTL 0x00
-+#define AR531XPLUS_SPI_OPCODE 0x04
-+#define AR531XPLUS_SPI_DATA 0x08
-+
-+#define SPI_FLASH_READ AR531XPLUS_SPI_READ
-+#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR
-+#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE
-+#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL
-+#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE
-+#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA
-+
-+#define SPI_CTL_START 0x00000100
-+#define SPI_CTL_BUSY 0x00010000
-+#define SPI_CTL_TXCNT_MASK 0x0000000f
-+#define SPI_CTL_RXCNT_MASK 0x000000f0
-+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff
-+#define SPI_CTL_SIZE_MASK 0x00060000
-+
-+#define SPI_CTL_CLK_SEL_MASK 0x03000000
-+#define SPI_OPCODE_MASK 0x000000ff
-+
-+#define SPI_STATUS_WIP STM_STATUS_WIP
-+
-+#endif
diff --git a/target/linux/atheros/patches-2.6.36/130-watchdog.patch b/target/linux/atheros/patches-2.6.36/130-watchdog.patch
deleted file mode 100644
index 364c92bc4a..0000000000
--- a/target/linux/atheros/patches-2.6.36/130-watchdog.patch
+++ /dev/null
@@ -1,228 +0,0 @@
---- /dev/null
-+++ b/drivers/watchdog/ar2315-wtd.c
-@@ -0,0 +1,200 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
-+ * Based on EP93xx and ifxmips wdt driver
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/fs.h>
-+#include <linux/ioport.h>
-+#include <linux/notifier.h>
-+#include <linux/reboot.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+#include <asm/system.h>
-+#include <asm/addrspace.h>
-+#include <ar231x_platform.h>
-+#include <ar2315_regs.h>
-+#include <ar231x.h>
-+
-+#define CLOCK_RATE 40000000
-+#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
-+
-+static int wdt_timeout = 20;
-+static int started = 0;
-+static int in_use = 0;
-+
-+static void
-+ar2315_wdt_enable(void)
-+{
-+ ar231x_write_reg(AR2315_WD, wdt_timeout * CLOCK_RATE);
-+ ar231x_write_reg(AR2315_ISR, 0x80);
-+}
-+
-+static ssize_t
-+ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
-+{
-+ if(len)
-+ ar2315_wdt_enable();
-+ return len;
-+}
-+
-+static int
-+ar2315_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if(in_use)
-+ return -EBUSY;
-+ ar2315_wdt_enable();
-+ in_use = started = 1;
-+ return nonseekable_open(inode, file);
-+}
-+
-+static int
-+ar2315_wdt_release(struct inode *inode, struct file *file)
-+{
-+ in_use = 0;
-+ return 0;
-+}
-+
-+static irqreturn_t
-+ar2315_wdt_interrupt(int irq, void *dev_id)
-+{
-+ if(started)
-+ {
-+ printk(KERN_CRIT "watchdog expired, rebooting system\n");
-+ emergency_restart();
-+ } else {
-+ ar231x_write_reg(AR2315_WDC, 0);
-+ ar231x_write_reg(AR2315_WD, 0);
-+ ar231x_write_reg(AR2315_ISR, 0x80);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static struct watchdog_info ident = {
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
-+ .identity = "ar2315 Watchdog",
-+};
-+
-+static int
-+ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ int new_wdt_timeout;
-+ int ret = -ENOIOCTLCMD;
-+
-+ switch(cmd)
-+ {
-+ case WDIOC_GETSUPPORT:
-+ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
-+ break;
-+
-+ case WDIOC_KEEPALIVE:
-+ ar2315_wdt_enable();
-+ ret = 0;
-+ break;
-+
-+ case WDIOC_SETTIMEOUT:
-+ if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
-+ break;
-+ wdt_timeout = HEARTBEAT(new_wdt_timeout);
-+ ar2315_wdt_enable();
-+ break;
-+
-+ case WDIOC_GETTIMEOUT:
-+ ret = put_user(wdt_timeout, (int __user *)arg);
-+ break;
-+ }
-+ return ret;
-+}
-+
-+static struct file_operations ar2315_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .write = ar2315_wdt_write,
-+ .ioctl = ar2315_wdt_ioctl,
-+ .open = ar2315_wdt_open,
-+ .release = ar2315_wdt_release,
-+};
-+
-+static struct miscdevice ar2315_wdt_miscdev = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &ar2315_wdt_fops,
-+};
-+
-+static int
-+ar2315_wdt_probe(struct platform_device *dev)
-+{
-+ int ret = 0;
-+
-+ ar2315_wdt_enable();
-+ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
-+ if(ret)
-+ {
-+ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
-+ goto out;
-+ }
-+
-+ ret = misc_register(&ar2315_wdt_miscdev);
-+ if(ret)
-+ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
-+
-+out:
-+ return ret;
-+}
-+
-+static int
-+ar2315_wdt_remove(struct platform_device *dev)
-+{
-+ misc_deregister(&ar2315_wdt_miscdev);
-+ free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver ar2315_wdt_driver = {
-+ .probe = ar2315_wdt_probe,
-+ .remove = ar2315_wdt_remove,
-+ .driver = {
-+ .name = "ar2315_wdt",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init
-+init_ar2315_wdt(void)
-+{
-+ int ret = platform_driver_register(&ar2315_wdt_driver);
-+ if(ret)
-+ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
-+ return ret;
-+}
-+
-+static void __exit
-+exit_ar2315_wdt(void)
-+{
-+ platform_driver_unregister(&ar2315_wdt_driver);
-+}
-+
-+module_init(init_ar2315_wdt);
-+module_exit(exit_ar2315_wdt);
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -916,6 +916,12 @@ config OCTEON_WDT
- from the first interrupt, it is then only poked when the
- device is written.
-
-+config ATHEROS_WDT
-+ tristate "Atheros wisoc Watchdog Timer"
-+ depends on ATHEROS_AR231X
-+ help
-+ Hardware driver for the Atheros wisoc Watchdog Timer.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -115,6 +115,7 @@ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
-+obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
diff --git a/target/linux/atheros/patches-2.6.36/140-redboot_partition_scan.patch b/target/linux/atheros/patches-2.6.36/140-redboot_partition_scan.patch
deleted file mode 100644
index a09271a069..0000000000
--- a/target/linux/atheros/patches-2.6.36/140-redboot_partition_scan.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -78,31 +78,32 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
- }
- } else {
- offset = directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- offset += master->erasesize;
- if (offset == master->size)
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
--
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-
-@@ -174,6 +175,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
diff --git a/target/linux/atheros/patches-2.6.36/141-redboot_various_erase_size_fix.patch b/target/linux/atheros/patches-2.6.36/141-redboot_various_erase_size_fix.patch
deleted file mode 100644
index 0e33f60b93..0000000000
--- a/target/linux/atheros/patches-2.6.36/141-redboot_various_erase_size_fix.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -57,6 +57,22 @@ static inline int redboot_checksum(struc
- return 1;
- }
-
-+static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset)
-+{
-+ struct mtd_erase_region_info *regions = mtd->eraseregions;
-+ int i;
-+
-+ for (i = 0; i < mtd->numeraseregions; i++) {
-+ if (regions[i].offset +
-+ regions[i].numblocks * regions[i].erasesize <= offset)
-+ continue;
-+
-+ return regions[i].erasesize;
-+ }
-+
-+ return mtd->erasesize;
-+}
-+
- static int parse_redboot_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long fis_origin)
-@@ -73,6 +89,7 @@ static int parse_redboot_partitions(stru
- int namelen = 0;
- int nulllen = 0;
- int numslots;
-+ int first_slot;
- unsigned long offset;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- static char nullstring[] = "unallocated";
-@@ -186,7 +203,10 @@ static int parse_redboot_partitions(stru
- goto out;
- }
-
-- for (i = 0; i < numslots; i++) {
-+ first_slot = (buf[i].flash_base & (master->erasesize - 1)) /
-+ sizeof(struct fis_image_desc);
-+
-+ for (i = first_slot; i < first_slot + numslots; i++) {
- struct fis_list *new_fl, **prev;
-
- if (buf[i].name[0] == 0xff) {
-@@ -262,12 +282,13 @@ static int parse_redboot_partitions(stru
- }
- #endif
- for ( ; i<nrparts; i++) {
-- if(max_offset < buf[i].flash_base + buf[i].size)
-- max_offset = buf[i].flash_base + buf[i].size;
- parts[i].size = fl->img->size;
- parts[i].offset = fl->img->flash_base;
- parts[i].name = names;
-
-+ if (max_offset < parts[i].offset + parts[i].size)
-+ max_offset = parts[i].offset + parts[i].size;
-+
- strcpy(names, fl->img->name);
- #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY
- if (!memcmp(names, "RedBoot", 8) ||
-@@ -297,7 +318,9 @@ static int parse_redboot_partitions(stru
- fl = fl->next;
- kfree(tmp_fl);
- }
-- if(master->size - max_offset >= master->erasesize)
-+
-+ if (master->size - max_offset >=
-+ mtd_get_offset_erasesize(master, max_offset))
- {
- parts[nrparts].size = master->size - max_offset;
- parts[nrparts].offset = max_offset;
diff --git a/target/linux/atheros/patches-2.6.36/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.36/200-ar2313_enable_mvswitch.patch
deleted file mode 100644
index c652d7ba6d..0000000000
--- a/target/linux/atheros/patches-2.6.36/200-ar2313_enable_mvswitch.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/drivers/net/ar231x.c
-+++ b/drivers/net/ar231x.c
-@@ -740,6 +740,7 @@ static void ar231x_load_rx_ring(struct n
- for (i = 0; i < nr_bufs; i++) {
- struct sk_buff *skb;
- ar231x_descr_t *rd;
-+ int offset = RX_OFFSET;
-
- if (sp->rx_skb[idx])
- break;
-@@ -755,7 +756,9 @@ static void ar231x_load_rx_ring(struct n
- * Make sure IP header starts on a fresh cache line.
- */
- skb->dev = dev;
-- skb_reserve(skb, RX_OFFSET);
-+ if (sp->phy_dev)
-+ offset += sp->phy_dev->pkt_align;
-+ skb_reserve(skb, offset);
- sp->rx_skb[idx] = skb;
-
- rd = (ar231x_descr_t *) & sp->rx_ring[idx];
-@@ -829,20 +832,23 @@ static int ar231x_rx_int(struct net_devi
- /* alloc new buffer. */
- skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
- if (skb_new != NULL) {
-+ int offset;
-
- skb = sp->rx_skb[idx];
- /* set skb */
- skb_put(skb,
- ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
--
- dev->stats.rx_bytes += skb->len;
-- skb->protocol = eth_type_trans(skb, dev);
-- /* pass the packet to upper layers */
-- netif_rx(skb);
-
-+ /* pass the packet to upper layers */
-+ sp->rx(skb);
- skb_new->dev = dev;
-+
- /* 16 bit align */
-- skb_reserve(skb_new, RX_OFFSET);
-+ offset = RX_OFFSET;
-+ if (sp->phy_dev)
-+ offset += sp->phy_dev->pkt_align;
-+ skb_reserve(skb_new, offset);
- /* reset descriptor's curr_addr */
- rxdesc->addr = virt_to_phys(skb_new->data);
-
-@@ -1254,6 +1260,8 @@ static int ar231x_mdiobus_probe (struct
- return PTR_ERR(phydev);
- }
-
-+ sp->rx = phydev->netif_rx;
-+
- /* mask with MAC supported features */
- phydev->supported &= (SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
---- a/drivers/net/ar231x.h
-+++ b/drivers/net/ar231x.h
-@@ -221,6 +221,8 @@ typedef struct {
- */
- struct ar231x_private {
- struct net_device *dev;
-+ int (*rx)(struct sk_buff *skb);
-+
- int version;
- u32 mb[2];
-
diff --git a/target/linux/atheros/patches-2.6.36/209_watchdog_fix.patch b/target/linux/atheros/patches-2.6.36/209_watchdog_fix.patch
deleted file mode 100644
index bad20e387a..0000000000
--- a/target/linux/atheros/patches-2.6.36/209_watchdog_fix.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/watchdog/ar2315-wtd.c
-+++ b/drivers/watchdog/ar2315-wtd.c
-@@ -132,7 +132,7 @@ static struct file_operations ar2315_wdt
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = ar2315_wdt_write,
-- .ioctl = ar2315_wdt_ioctl,
-+ .unlocked_ioctl = ar2315_wdt_ioctl,
- .open = ar2315_wdt_open,
- .release = ar2315_wdt_release,
- };
diff --git a/target/linux/atheros/patches-2.6.36/210-reset_button.patch b/target/linux/atheros/patches-2.6.36/210-reset_button.patch
deleted file mode 100644
index 3c91818146..0000000000
--- a/target/linux/atheros/patches-2.6.36/210-reset_button.patch
+++ /dev/null
@@ -1,174 +0,0 @@
---- a/arch/mips/ar231x/Makefile
-+++ b/arch/mips/ar231x/Makefile
-@@ -8,7 +8,7 @@
- # Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
- #
-
--obj-y += board.o prom.o devices.o
-+obj-y += board.o prom.o devices.o reset.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
---- /dev/null
-+++ b/arch/mips/ar231x/reset.c
-@@ -0,0 +1,160 @@
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/kobject.h>
-+#include <linux/workqueue.h>
-+#include <linux/skbuff.h>
-+#include <linux/netlink.h>
-+#include <net/sock.h>
-+#include <asm/uaccess.h>
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include <gpio.h>
-+#include "devices.h"
-+
-+#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(ar231x_board.config->resetConfigGpio))
-+
-+struct event_t {
-+ struct work_struct wq;
-+ int set;
-+ unsigned long jiffies;
-+};
-+
-+static struct timer_list rst_button_timer;
-+static unsigned long seen;
-+
-+extern struct sock *uevent_sock;
-+extern u64 uevent_next_seqnum(void);
-+
-+static int no_release_workaround = 1;
-+module_param(no_release_workaround, int, 0);
-+
-+static inline void
-+add_msg(struct sk_buff *skb, char *msg)
-+{
-+ char *scratch;
-+ scratch = skb_put(skb, strlen(msg) + 1);
-+ sprintf(scratch, msg);
-+}
-+
-+static void
-+hotplug_button(struct work_struct *wq)
-+{
-+ struct sk_buff *skb;
-+ struct event_t *event;
-+ size_t len;
-+ char *scratch, *s;
-+ char buf[128];
-+
-+ event = container_of(wq, struct event_t, wq);
-+ if (!uevent_sock)
-+ goto done;
-+
-+ /* allocate message with the maximum possible size */
-+ s = event->set ? "pressed" : "released";
-+ len = strlen(s) + 2;
-+ skb = alloc_skb(NLMSG_GOODSIZE, GFP_KERNEL);
-+ if (!skb)
-+ goto done;
-+
-+ /* add header */
-+ scratch = skb_put(skb, len);
-+ sprintf(scratch, "%s@",s);
-+
-+ /* copy keys to our continuous event payload buffer */
-+ add_msg(skb, "HOME=/");
-+ add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin");
-+ add_msg(skb, "SUBSYSTEM=button");
-+ add_msg(skb, "BUTTON=reset");
-+ add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released"));
-+ sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ);
-+ add_msg(skb, buf);
-+ snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
-+ add_msg(skb, buf);
-+
-+ NETLINK_CB(skb).dst_group = 1;
-+ netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
-+
-+done:
-+ kfree(event);
-+}
-+
-+static void
-+reset_button_poll(unsigned long unused)
-+{
-+ struct event_t *event;
-+ int gpio = ~0;
-+
-+ if(!no_release_workaround)
-+ return;
-+
-+ gpio = ar231x_gpiodev->get();
-+ gpio &= (1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE));
-+ if(gpio) {
-+ rst_button_timer.expires = jiffies + (HZ / 4);
-+ add_timer(&rst_button_timer);
-+ return;
-+ }
-+
-+ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
-+ if (!event)
-+ return;
-+
-+ event->set = 0;
-+ event->jiffies = jiffies;
-+ INIT_WORK(&event->wq, hotplug_button);
-+ schedule_work(&event->wq);
-+}
-+
-+static irqreturn_t
-+button_handler(int irq, void *dev_id)
-+{
-+ static int pressed = 0;
-+ struct event_t *event;
-+ u32 gpio = ~0;
-+
-+ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
-+ if (!event)
-+ return IRQ_NONE;
-+
-+ pressed = !pressed;
-+
-+ gpio = ar231x_gpiodev->get() & (1 << (irq - AR531X_GPIO_IRQ_BASE));
-+
-+ event->set = gpio;
-+ if(!event->set)
-+ no_release_workaround = 0;
-+
-+ event->jiffies = jiffies;
-+
-+ INIT_WORK(&event->wq, hotplug_button);
-+ schedule_work(&event->wq);
-+
-+ seen = jiffies;
-+ if(event->set && no_release_workaround)
-+ mod_timer(&rst_button_timer, jiffies + (HZ / 4));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int __init
-+ar231x_init_reset(void)
-+{
-+ seen = jiffies;
-+
-+ if (ar231x_board.config->resetConfigGpio == 0xffff)
-+ return -ENODEV;
-+
-+ init_timer(&rst_button_timer);
-+ rst_button_timer.function = reset_button_poll;
-+ rst_button_timer.expires = jiffies + HZ / 50;
-+ add_timer(&rst_button_timer);
-+
-+ request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar231x_reset", NULL);
-+
-+ return 0;
-+}
-+
-+module_init(ar231x_init_reset);
diff --git a/target/linux/atheros/patches-2.6.36/211-reset_button-2.6.36.patch b/target/linux/atheros/patches-2.6.36/211-reset_button-2.6.36.patch
deleted file mode 100644
index e19144cc12..0000000000
--- a/target/linux/atheros/patches-2.6.36/211-reset_button-2.6.36.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/mips/ar231x/reset.c
-+++ b/arch/mips/ar231x/reset.c
-@@ -24,7 +24,8 @@ struct event_t {
- static struct timer_list rst_button_timer;
- static unsigned long seen;
-
--extern struct sock *uevent_sock;
-+struct sock *uevent_sock = NULL;
-+EXPORT_SYMBOL_GPL(uevent_sock);
- extern u64 uevent_next_seqnum(void);
-
- static int no_release_workaround = 1;
diff --git a/target/linux/atheros/patches-2.6.36/220-enet_micrel_workaround.patch b/target/linux/atheros/patches-2.6.36/220-enet_micrel_workaround.patch
deleted file mode 100644
index 6d0bf4725b..0000000000
--- a/target/linux/atheros/patches-2.6.36/220-enet_micrel_workaround.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/drivers/net/ar231x.c
-+++ b/drivers/net/ar231x.c
-@@ -149,6 +149,7 @@ static int ar231x_mdiobus_write(struct m
- static int ar231x_mdiobus_reset(struct mii_bus *bus);
- static int ar231x_mdiobus_probe (struct net_device *dev);
- static void ar231x_adjust_link(struct net_device *dev);
-+static bool no_phy = false;
-
- #ifndef ERR
- #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-@@ -283,6 +284,21 @@ int __init ar231x_probe(struct platform_
-
- mdiobus_register(sp->mii_bus);
-
-+ /* Workaround for Micrel switch, which is only available on
-+ * one PHY and cannot be configured through MDIO */
-+ if (!no_phy) {
-+ u32 phy_id = 0;
-+ get_phy_id(sp->mii_bus, 1, &phy_id);
-+ if (phy_id == 0x00221450)
-+ no_phy = true;
-+ }
-+ if (no_phy) {
-+ sp->link = 1;
-+ netif_carrier_on(dev);
-+ return 0;
-+ }
-+ no_phy = true;
-+
- if (ar231x_mdiobus_probe(dev) != 0) {
- printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
- rx_tasklet_cleanup(dev);
-@@ -339,8 +355,10 @@ static int __devexit ar231x_remove(struc
- rx_tasklet_cleanup(dev);
- ar231x_init_cleanup(dev);
- unregister_netdev(dev);
-- mdiobus_unregister(sp->mii_bus);
-- mdiobus_free(sp->mii_bus);
-+ if (sp->mii_bus) {
-+ mdiobus_unregister(sp->mii_bus);
-+ mdiobus_free(sp->mii_bus);
-+ }
- kfree(dev);
- return 0;
- }
-@@ -841,7 +859,12 @@ static int ar231x_rx_int(struct net_devi
- dev->stats.rx_bytes += skb->len;
-
- /* pass the packet to upper layers */
-- sp->rx(skb);
-+ if (sp->rx) {
-+ sp->rx(skb);
-+ } else {
-+ skb->protocol = eth_type_trans(skb, skb->dev);
-+ netif_rx(skb);
-+ }
- skb_new->dev = dev;
-
- /* 16 bit align */
-@@ -1138,6 +1161,9 @@ static int ar231x_ioctl(struct net_devic
- struct ar231x_private *sp = netdev_priv(dev);
- int ret;
-
-+ if (!sp->phy_dev)
-+ return -ENODEV;
-+
- switch (cmd) {
-
- case SIOCETHTOOL: