aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch')
-rw-r--r--target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch24
1 files changed, 9 insertions, 15 deletions
diff --git a/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch b/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch
index 5532a5fb53..a0c411599d 100644
--- a/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch
+++ b/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch
@@ -32,7 +32,7 @@
+obj-$(CONFIG_NET_VENDOR_AR231X) += ar231x.o
--- /dev/null
+++ b/drivers/net/ethernet/ar231x/ar231x.c
-@@ -0,0 +1,1254 @@
+@@ -0,0 +1,1249 @@
+/*
+ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
+ *
@@ -289,12 +289,6 @@
+ return -ENXIO;
+ }
+
-+ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
-+ if (!sp->int_regs) {
-+ printk("Can't remap INTERRUPT registers\n");
-+ return -ENXIO;
-+ }
-+
+ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
+ sp->name[sizeof(sp->name) - 1] = '\0';
+ memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
@@ -609,13 +603,13 @@
+ unsigned int ethsal, ethsah;
+ unsigned int flags;
+
-+ *sp->int_regs |= sp->cfg->reset_mac;
++ sp->cfg->reset_set(sp->cfg->reset_mac);
+ mdelay(10);
-+ *sp->int_regs &= ~sp->cfg->reset_mac;
++ sp->cfg->reset_clear(sp->cfg->reset_mac);
+ mdelay(10);
-+ *sp->int_regs |= sp->cfg->reset_phy;
++ sp->cfg->reset_set(sp->cfg->reset_phy);
+ mdelay(10);
-+ *sp->int_regs &= ~sp->cfg->reset_phy;
++ sp->cfg->reset_clear(sp->cfg->reset_phy);
+ mdelay(10);
+
+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
@@ -1052,7 +1046,8 @@
+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
+
+ /* place phy and MAC in reset */
-+ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
++ sp->cfg->reset_set(sp->cfg->reset_mac);
++ sp->cfg->reset_set(sp->cfg->reset_phy);
+
+ /* free buffers on tx ring */
+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
@@ -1076,7 +1071,7 @@
+ * the irq is gone forever ! When bond0 is made 'up' again,
+ * the ar231x_open () does not call request_irq (). Worse,
+ * the call to ar231x_halt() generates a WDOG reset due to
-+ * the write to 'sp->int_regs' and the box reboots.
++ * the write to reset register and the box reboots.
+ * Commenting this out is good since it allows the
+ * system to resume when bond0 is made up again.
+ */
@@ -1289,7 +1284,7 @@
+
--- /dev/null
+++ b/drivers/net/ethernet/ar231x/ar231x.h
-@@ -0,0 +1,288 @@
+@@ -0,0 +1,287 @@
+/*
+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
+ *
@@ -1515,7 +1510,6 @@
+ volatile ETHERNET_STRUCT *phy_regs;
+ volatile ETHERNET_STRUCT *eth_regs;
+ volatile DMA *dma_regs;
-+ volatile u32 *int_regs;
+ struct ar231x_eth *cfg;
+
+ spinlock_t lock; /* Serialise access to device */