aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ath79')
-rw-r--r--target/linux/ath79/dts/ar9331_glinet_gl-mifi.dts152
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds4
-rw-r--r--target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration3
-rw-r--r--target/linux/ath79/image/generic.mk10
4 files changed, 169 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9331_glinet_gl-mifi.dts b/target/linux/ath79/dts/ar9331_glinet_gl-mifi.dts
new file mode 100644
index 0000000000..e969007fc0
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_glinet_gl-mifi.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ compatible = "glinet,gl-mifi", "qca,ar9331";
+ model = "GL.iNet GL-MiFi";
+
+ aliases {
+ serial0 = &uart;
+ label-mac-device = &eth0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "gl-mifi:green:wlan";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "gl-mifi:green:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "gl-mifi:green:wan";
+ gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ 3g4g {
+ label = "gl-mifi:green:3g4g";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <60>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ minipcie {
+ gpio-export,name = "minipcie";
+ gpio-export,output = <0>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+
+ dr_mode = "host";
+ vbus-supply = <&reg_usb_vbus>;
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ num-chipselects = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <0>;
+ switch-phy-swap = <0>;
+ };
+};
+
+&eth1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 2bd70aae31..f3e3b758b5 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -153,6 +153,10 @@ glinet,gl-ar300m-lite)
glinet,gl-ar300m16)
ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0"
;;
+glinet,gl-mifi)
+ ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02"
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
+ ;;
glinet,gl-x750)
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
;;
diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
index 1c7ecba5f8..757b0c9974 100644
--- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
+++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
@@ -8,6 +8,9 @@ case "$board" in
engenius,epg5000)
migrate_leds ":wlan-2g=:wlan2g" ":wlan-5g=:wlan5g"
;;
+glinet,gl-mifi)
+ migrate_leds ":net=:3g4g"
+ ;;
tplink,archer-c25-v1|\
tplink,archer-c58-v1|\
tplink,archer-c59-v1|\
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 5ef6104ef6..0e7efa32af 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -821,6 +821,16 @@ define Device/glinet_gl-ar750
endef
TARGET_DEVICES += glinet_gl-ar750
+define Device/glinet_gl-mifi
+ SOC := ar9331
+ DEVICE_VENDOR := GL.iNET
+ DEVICE_MODEL := GL-MiFi
+ DEVICE_PACKAGES := kmod-usb-chipidea2
+ IMAGE_SIZE := 16000k
+ SUPPORTED_DEVICES += gl-mifi
+endef
+TARGET_DEVICES += glinet_gl-mifi
+
define Device/glinet_gl-x750
SOC := qca9531
DEVICE_VENDOR := GL.iNet