diff options
Diffstat (limited to 'target/linux/ath79')
9 files changed, 95 insertions, 42 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 2ce489b0d1..e22cee51a3 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -401,10 +401,7 @@ tplink,tl-mr6400-v1) ucidef_set_led_netdev "wan" "WAN" "white:wan" "eth1" ucidef_set_led_netdev "4g" "4G" "white:4g" "usb0" ;; -tplink,tl-wpa8630-v1|\ -tplink,tl-wpa8630p-v2-int|\ -tplink,tl-wpa8630p-v2.0-eu|\ -tplink,tl-wpa8630p-v2.1-eu) +tplink,tl-wpa8630-v1) ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c" ;; tplink,tl-wr841hp-v2|\ diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index bc32081910..2f0208b288 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -440,10 +440,7 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:1" "2:lan:3" "3:lan:2" ;; - tplink,tl-wpa8630-v1|\ - tplink,tl-wpa8630p-v2-int|\ - tplink,tl-wpa8630p-v2.0-eu|\ - tplink,tl-wpa8630p-v2.1-eu) + tplink,tl-wpa8630-v1) # port 5 (internal) is the power-line port ucidef_add_switch "switch0" \ "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4" diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index b8e99a661f..348b8839b6 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -249,10 +249,7 @@ case "$FIRMWARE" in ;; tplink,eap225-outdoor-v1|\ tplink,eap225-v3|\ - tplink,eap225-wall-v2|\ - tplink,tl-wpa8630p-v2-int|\ - tplink,tl-wpa8630p-v2.0-eu|\ - tplink,tl-wpa8630p-v2.1-eu) + tplink,eap225-wall-v2) caldata_extract "art" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 37a0fcc169..6479f6e26a 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -640,36 +640,6 @@ define Device/tplink_tl-wpa8630-v1 endef TARGET_DEVICES += tplink_tl-wpa8630-v1 -define Device/tplink_tl-wpa8630p-v2 - $(Device/tplink-safeloader) - SOC := qca9563 - DEVICE_MODEL := TL-WPA8630P - IMAGE_SIZE := 6016k - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct -endef - -define Device/tplink_tl-wpa8630p-v2-int - $(Device/tplink_tl-wpa8630p-v2) - DEVICE_VARIANT := v2 (Int.) - TPLINK_BOARD_ID := TL-WPA8630P-V2-INT -endef -TARGET_DEVICES += tplink_tl-wpa8630p-v2-int - -define Device/tplink_tl-wpa8630p-v2.0-eu - $(Device/tplink_tl-wpa8630p-v2) - DEVICE_VARIANT := v2.0 (EU) - TPLINK_BOARD_ID := TL-WPA8630P-V2.0-EU - SUPPORTED_DEVICES += tplink,tl-wpa8630p-v2-eu -endef -TARGET_DEVICES += tplink_tl-wpa8630p-v2.0-eu - -define Device/tplink_tl-wpa8630p-v2.1-eu - $(Device/tplink_tl-wpa8630p-v2) - DEVICE_VARIANT := v2.1 (EU) - TPLINK_BOARD_ID := TL-WPA8630P-V2.1-EU -endef -TARGET_DEVICES += tplink_tl-wpa8630p-v2.1-eu - define Device/tplink_tl-wr1043nd-v1 $(Device/tplink-8m) SOC := ar9132 diff --git a/target/linux/ath79/image/tiny-tp-link.mk b/target/linux/ath79/image/tiny-tp-link.mk index c918c6baa6..2110f08b52 100644 --- a/target/linux/ath79/image/tiny-tp-link.mk +++ b/target/linux/ath79/image/tiny-tp-link.mk @@ -223,6 +223,41 @@ define Device/tplink_tl-wa901nd-v5 endef TARGET_DEVICES += tplink_tl-wa901nd-v5 +define Device/tplink_tl-wpa8630p-v2 + $(Device/tplink-safeloader) + SOC := qca9563 + DEVICE_MODEL := TL-WPA8630P + IMAGE_SIZE := 6016k + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct + DEVICE_COMPAT_VERSION := 2.0 + DEVICE_COMPAT_MESSAGE := The flash erase blocksize has changed to 4k from the 64k in previous versions, \ + so the JFFS2 settings partition MUST be reformatted to avoid data corruption. \ + Backup your settings before upgrading, then during sysupgrade, \ + de-select "Keep settings" and select "Force" to continue (equivilant to "sysupgrade -n -F"). +endef + +define Device/tplink_tl-wpa8630p-v2-int + $(Device/tplink_tl-wpa8630p-v2) + DEVICE_VARIANT := v2 (Int.) + TPLINK_BOARD_ID := TL-WPA8630P-V2-INT +endef +TARGET_DEVICES += tplink_tl-wpa8630p-v2-int + +define Device/tplink_tl-wpa8630p-v2.0-eu + $(Device/tplink_tl-wpa8630p-v2) + DEVICE_VARIANT := v2.0 (EU) + TPLINK_BOARD_ID := TL-WPA8630P-V2.0-EU + SUPPORTED_DEVICES += tplink,tl-wpa8630p-v2-eu +endef +TARGET_DEVICES += tplink_tl-wpa8630p-v2.0-eu + +define Device/tplink_tl-wpa8630p-v2.1-eu + $(Device/tplink_tl-wpa8630p-v2) + DEVICE_VARIANT := v2.1 (EU) + TPLINK_BOARD_ID := TL-WPA8630P-V2.1-EU +endef +TARGET_DEVICES += tplink_tl-wpa8630p-v2.1-eu + define Device/tplink_tl-wr703n $(Device/tplink-4mlzma) SOC := ar9331 diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds index 72df8b3dea..f705c5c718 100644 --- a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds @@ -93,6 +93,11 @@ tplink,tl-wa850re-v2) ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "blue:signal4" "wlan0" "60" "100" ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "blue:signal5" "wlan0" "80" "100" ;; +tplink,tl-wpa8630p-v2-int|\ +tplink,tl-wpa8630p-v2.0-eu|\ +tplink,tl-wpa8630p-v2.1-eu) + ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c" + ;; tplink,tl-wr940n-v3|\ tplink,tl-wr940n-v4|\ tplink,tl-wr941nd-v6) diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/02_network b/target/linux/ath79/tiny/base-files/etc/board.d/02_network index 45335c7c89..77b2444819 100644 --- a/target/linux/ath79/tiny/base-files/etc/board.d/02_network +++ b/target/linux/ath79/tiny/base-files/etc/board.d/02_network @@ -82,6 +82,13 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" ;; + tplink,tl-wpa8630p-v2-int|\ + tplink,tl-wpa8630p-v2.0-eu|\ + tplink,tl-wpa8630p-v2.1-eu) + # port 5 (internal) is the power-line port + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4" + ;; tplink,tl-wr941-v2) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" ;; diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version b/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version new file mode 100644 index 0000000000..b6c2ae48f7 --- /dev/null +++ b/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version @@ -0,0 +1,20 @@ +# +# Copyright (C) 2020 OpenWrt.org +# + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh + +board_config_update + +case "$(board_name)" in + tplink,tl-wpa8630p-v2-int|\ + tplink,tl-wpa8630p-v2.0-eu|\ + tplink,tl-wpa8630p-v2.1-eu) + ucidef_set_compat_version "2.0" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata new file mode 100644 index 0000000000..8e3e142ec9 --- /dev/null +++ b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -0,0 +1,25 @@ +#!/bin/sh + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/functions/caldata.sh + +board=$(board_name) + +case "$FIRMWARE" in +"ath10k/pre-cal-pci-0000:00:00.0.bin") + case $board in + tplink,tl-wpa8630p-v2-int|\ + tplink,tl-wpa8630p-v2.0-eu|\ + tplink,tl-wpa8630p-v2.1-eu) + caldata_extract "art" 0x5000 0x2f20 + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1) + ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ + /lib/firmware/ath10k/QCA9888/hw2.0/board.bin + ;; + esac + ;; +*) + exit 1 + ;; +esac |