aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ath79')
-rw-r--r--target/linux/ath79/dts/ar7242_meraki_mr12.dts170
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds19
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network5
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom3
-rw-r--r--target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration3
-rw-r--r--target/linux/ath79/generic/base-files/etc/uci-defaults/05_fix-compat-version1
-rw-r--r--target/linux/ath79/image/generic.mk17
7 files changed, 209 insertions, 9 deletions
diff --git a/target/linux/ath79/dts/ar7242_meraki_mr12.dts b/target/linux/ath79/dts/ar7242_meraki_mr12.dts
new file mode 100644
index 0000000000..125919d4f1
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_meraki_mr12.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7242.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "meraki,mr12", "qca,ar7242";
+ model = "Meraki MR12";
+
+ aliases {
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_orange;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ link1 {
+ label = "green:link1";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ link2 {
+ label = "green:link2";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ link3 {
+ label = "green:link3";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ link4 {
+ label = "green:link4";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ wifi@0,0,0 {
+ compatible = "pci168c,002a";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ mtd-mac-address = <&config 0x66>;
+ mtd-mac-address-increment = <1>;
+ };
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&config 0x66>;
+
+ pll-data = <0x02000000 0x00000101 0x00001313>;
+
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy4>;
+};
+
+&mdio1 {
+ status = "okay";
+};
+
+&eth1 {
+ status = "okay";
+
+ mtd-mac-address = <&config 0x66>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x40000>;
+ read-only;
+ };
+
+ config: partition@80000 {
+ label = "config";
+ reg = <0x80000 0x20000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "firmware";
+ reg = <0xa0000 0xf40000>;
+ compatible = "denx,uimage";
+ };
+
+ partition@fe0000 {
+ label = "art";
+ reg = <0xfe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index c6ade98c8f..169df8b285 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -217,6 +217,16 @@ glinet,gl-x750)
hak5,lan-turtle)
ucidef_set_led_netdev "wan" "WAN" "orange:system" "eth1"
;;
+meraki,mr12|\
+tplink,cpe210-v2|\
+tplink,cpe210-v3)
+ ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "green:link1" "wlan0" "1" "100"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:link2" "wlan0" "30" "100"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:link3" "wlan0" "60" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:link4" "wlan0" "80" "100"
+ ;;
meraki,mr16)
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
;;
@@ -306,15 +316,6 @@ tplink,wbs510-v2)
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:link3" "wlan0" "60" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:link4" "wlan0" "80" "100"
;;
-tplink,cpe210-v2|\
-tplink,cpe210-v3)
- ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "green:link1" "wlan0" "1" "100"
- ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:link2" "wlan0" "30" "100"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:link3" "wlan0" "60" "100"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:link4" "wlan0" "80" "100"
- ;;
tplink,cpe510-v2|\
tplink,cpe510-v3)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index cb6765bba5..cb675cab1a 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -265,6 +265,11 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "5:wan" "6@eth1" "4:lan"
;;
+ meraki,mr12)
+ ucidef_set_interface_lan "eth0"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan"
+ ;;
mercury,mw4530r-v1|\
tplink,archer-a7-v5|\
tplink,archer-c6-v2|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 552eb406ab..2e520ac067 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -56,6 +56,9 @@ case "$FIRMWARE" in
caldata_extract "calibrate" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR1)
;;
+ meraki,mr12)
+ caldata_extract "art" 0x11000 0xeb8
+ ;;
nec,wg800hp)
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_text board_data 0x680)
diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
index ea5cafa66b..e9b0fade38 100644
--- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
+++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
@@ -17,6 +17,9 @@ engenius,epg5000)
glinet,gl-mifi)
migrate_leds ":net=:3g4g"
;;
+meraki,mr12)
+ migrate_leds ":wifi=:link" ":wan=:lan"
+ ;;
openmesh,mr600-v1)
migrate_leds ":wlan58=:wifi5g"
;;
diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/05_fix-compat-version b/target/linux/ath79/generic/base-files/etc/uci-defaults/05_fix-compat-version
index af5fb80f26..a6b7fa3162 100644
--- a/target/linux/ath79/generic/base-files/etc/uci-defaults/05_fix-compat-version
+++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/05_fix-compat-version
@@ -1,6 +1,7 @@
. /lib/functions.sh
case "$(board_name)" in
+ meraki,mr12|\
meraki,mr16)
uci set system.@system[0].compat_version="2.0"
uci commit system
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index c43d396db5..d11cc28146 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1309,6 +1309,23 @@ define Device/librerouter_librerouter-v1
endef
TARGET_DEVICES += librerouter_librerouter-v1
+define Device/meraki_mr12
+ SOC := ar7242
+ DEVICE_VENDOR := Meraki
+ DEVICE_MODEL := MR12
+ IMAGE_SIZE := 15616k
+ DEVICE_PACKAGES := kmod-owl-loader rssileds
+ SUPPORTED_DEVICES += mr12
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := Partitions differ from ar71xx version of MR12. Image format is incompatible. \
+ To use sysupgrade, you must change /lib/update/common.sh::get_image to prepend 128K zeroes to this image, \
+ and change the bootcmd in u-boot to "bootm 0xbf0a0000". After that, you can use "sysupgrade -F -n". \
+ Make sure you do not keep your old config, as ethernet setup is not compatible either. \
+ For more details, see the OpenWrt Wiki: https://openwrt.org/toh/meraki/MR12, \
+ or the commit message of the MR12 ath79 port on git.openwrt.org.
+endef
+TARGET_DEVICES += meraki_mr12
+
define Device/meraki_mr16
SOC := ar7161
DEVICE_VENDOR := Meraki