diff options
Diffstat (limited to 'target/linux/ath79')
4 files changed, 66 insertions, 3 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index e608825fb8..30577a1a9f 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -20,6 +20,7 @@ ath79_setup_interfaces() tplink,tl-mr3040-v2|\ tplink,tl-wr703n|\ ubnt,bullet-m|\ + ubnt,nanostation-ac-loco|\ ubnt,rocket-m|\ ubnt,unifiac-lite|\ ubnt,unifiac-mesh|\ diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 8ede82c7ce..ec490dda7f 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -111,6 +111,7 @@ case "$FIRMWARE" in ubnt,unifiac-lite|\ ubnt,unifiac-mesh|\ ubnt,unifiac-mesh-pro|\ + ubnt,nanostation-ac-loco|\ ubnt,unifiac-pro) ath10kcal_extract "EEPROM" 20480 2116 ;; diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac-loco.dts b/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac-loco.dts new file mode 100644 index 0000000000..ea6e1cb6a4 --- /dev/null +++ b/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac-loco.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar9342_ubnt_wa.dtsi" + +/ { + compatible = "ubnt,nanostation-ac-loco", "ubnt,wa"; + model = "Ubiquiti Nanostation AC loco (WA)"; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <4>; + phy4: ethernet-phy@4 { + phy-mode = "rgmii"; + reg = <4>; + }; +}; + +ð0 { + status = "okay"; + + /* default for ar934x, except for 1000M and 10M */ + pll-data = <0x06000000 0x00000101 0x00001313>; + + mtd-mac-address = <&eeprom 0x0>; + + phy-mode = "rgmii"; + phy-handle = <&phy4>; + + gmac-config { + device = <&gmac>; + rxd-delay = <3>; + rxdv-delay = <3>; + }; +}; diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index 4ef9f8de3d..86afa11deb 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -1,4 +1,4 @@ -DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE +DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION # mkubntimage is using the kernel image direct # routerboard creates partitions out of the ubnt header @@ -10,14 +10,14 @@ define Build/mkubntimage -o $@ endef -# all UBNT XM device expect the kernel image to have 1024k while flash, when +# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when # booting the image, the size doesn't matter. define Build/mkubntimage-split -[ -f $@ ] && ( \ dd if=$@ of=$@.old1 bs=1024k count=1; \ dd if=$@ of=$@.old2 bs=1024k skip=1; \ $(STAGING_DIR_HOST)/bin/mkfwimage \ - -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ + -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(VERSION_DIST)-$(REVISION) \ -k $@.old1 \ -r $@.old2 \ -o $@; \ @@ -27,10 +27,12 @@ endef # UBNT_BOARD e.g. one of (XS2, XS5, RS, XM) # UBNT_TYPE e.g. one of (BZ, XM, XW) # UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x) +# UBNT_VERSION e.g. one of (6.0.0, 8.5.0) define Device/ubnt DEVICE_PACKAGES := kmod-usb-core kmod-usb2 IMAGE_SIZE := 7552k UBNT_BOARD := XM + UBNT_VERSION := 6.0.0 IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkubntimage-split @@ -52,6 +54,15 @@ define Device/ubnt-bz ATH_SOC := ar7241 endef +define Device/ubnt-wa + $(Device/ubnt) + UBNT_TYPE := WA + UBNT_CHIP := ar934x + UBNT_BOARD := WA + UBNT_VERSION := 8.5.0 + ATH_SOC := ar9342 +endef + define Device/ubnt_bullet-m $(Device/ubnt-xm) DEVICE_TITLE := Ubiquiti Bullet-M @@ -73,6 +84,16 @@ define Device/ubnt_nano-m endef TARGET_DEVICES += ubnt_nano-m +define Device/ubnt_nanostation-ac-loco + $(Device/ubnt-wa) + DEVICE_TITLE := Ubiquiti Nanostation AC loco + DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x + IMAGE_SIZE := 15744k + IMAGES += factory.bin + IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split +endef +TARGET_DEVICES += ubnt_nanostation-ac-loco + define Device/ubnt_unifi $(Device/ubnt-bz) DEVICE_TITLE := Ubiquiti UniFi |