1 files changed, 0 insertions, 64 deletions
diff --git a/target/linux/ath79/patches-4.19/0060-serial-ar933x_uart-set-UART_CS_-RX-TX-_READY_ORIDE.patch b/target/linux/ath79/patches-4.19/0060-serial-ar933x_uart-set-UART_CS_-RX-TX-_READY_ORIDE.patch
deleted file mode 100644
index 30828d693c..0000000000
--- a/target/linux/ath79/patches-4.19/0060-serial-ar933x_uart-set-UART_CS_-RX-TX-_READY_ORIDE.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From patchwork Fri Feb  7 09:53:35 2020
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 1190470
-Date: Fri, 7 Feb 2020 11:53:35 +0200
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org
-Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
-        Jiri Slaby <jslaby@suse.com>,
-        Chuanhong Guo <gch981213@gmail.com>,
-        Eitan Cohen <eitan@neot-semadar.com>,
-        Ori Gofen <origofen@gmail.com>
-Subject: [PATCH] serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
-Message-ID: <20200207095335.GA179836@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-Sender: linux-kernel-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <linux-kernel.vger.kernel.org>
-X-Mailing-List: linux-kernel@vger.kernel.org
-
-On AR934x this UART is usually not initialized by the bootloader
-as it is only used as a secondary serial port while the primary
-UART is a newly introduced NS16550-compatible.
-In order to make use of the ar933x-uart on AR934x without RTS/CTS
-hardware flow control, one needs to set the
-UART_CS_{RX,TX}_READY_ORIDE bits as other than on AR933x where this
-UART is used as primary/console, the bootloader on AR934x typically
-doesn't set those bits.
-Setting them explicitely on AR933x should not do any harm, so just
-set them unconditionally.
-
-Tested-by: Chuanhong Guo <gch981213@gmail.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/tty/serial/ar933x_uart.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/tty/serial/ar933x_uart.c
-+++ b/drivers/tty/serial/ar933x_uart.c
-@@ -290,6 +290,10 @@ static void ar933x_uart_set_termios(stru
- 	ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
- 		AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
- 
-+	/* enable RX and TX ready overide */
-+	ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
-+		AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
-+
- 	/* reenable the UART */
- 	ar933x_uart_rmw(up, AR933X_UART_CS_REG,
- 			AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
-@@ -424,6 +428,10 @@ static int ar933x_uart_startup(struct ua
- 
- 	/* enable RX and TX ready overide */
- 	ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
-+		AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
-+
-+	/* enable RX and TX ready overide */
-+	ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
- 		AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
- 
- 	/* Enable RX interrupts */