diff options
Diffstat (limited to 'target/linux/ath79/mikrotik/base-files')
6 files changed, 162 insertions, 0 deletions
diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network new file mode 100644 index 0000000000..ee795c7496 --- /dev/null +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -0,0 +1,39 @@ +#!/bin/sh + +. /lib/functions/system.sh +. /lib/functions/uci-defaults.sh + +ath79_setup_interfaces() +{ + local board="$1" + + case "$board" in + mikrotik,routerboard-922uags-5hpacd|\ + mikrotik,routerboard-wap-g-5hact2hnd) + ucidef_set_interface_lan "eth0" + ;; + *) + ucidef_set_interfaces_lan_wan "eth0" "eth1" + ;; + esac +} + +ath79_setup_macs() +{ + local board="$1" + + case "$board" in + esac + + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac +} + +board_config_update +board=$(board_name) +ath79_setup_interfaces $board +ath79_setup_macs $board +board_config_flush + +exit 0 diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom new file mode 100644 index 0000000000..f5f88484b5 --- /dev/null +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -0,0 +1,22 @@ +#!/bin/sh + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/functions/caldata.sh +. /lib/functions/mikrotik-caldata.sh + +board=$(board_name) + +case "$FIRMWARE" in +"ath9k-eeprom-ahb-18100000.wmac.bin") + case $board in + mikrotik,routerboard-wap-g-5hact2hnd) + mikrotik_caldata_extract "art" 0x1000 0x440 + ath9k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x10) +2) + ;; + *) + caldata_die "board $board is not supported yet" + ;; + esac + ;; +esac diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata new file mode 100644 index 0000000000..6eb9a93b75 --- /dev/null +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -0,0 +1,28 @@ +#!/bin/sh + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/functions/caldata.sh +. /lib/functions/mikrotik-caldata.sh + +board=$(board_name) + +case "$FIRMWARE" in +"ath10k/cal-pci-0000:00:00.0.bin") + case $board in + mikrotik,routerboard-wap-g-5hact2hnd) + mikrotik_caldata_extract "art" 0x5000 0x844 + ;; + esac + ;; +"ath10k/cal-pci-0000:01:00.0.bin") + case $board in + mikrotik,routerboard-922uags-5hpacd) + mikrotik_caldata_extract "art" 0x5000 0x844 + ;; + esac + ;; +*) + exit 1 + ;; +esac diff --git a/target/linux/ath79/mikrotik/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/mikrotik/base-files/etc/uci-defaults/04_led_migration new file mode 100644 index 0000000000..1a7b371a99 --- /dev/null +++ b/target/linux/ath79/mikrotik/base-files/etc/uci-defaults/04_led_migration @@ -0,0 +1,17 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/migrations.sh + +board=$(board_name) +boardonly="${board##*,}" + +case "$board" in +mikrotik,*) + migrate_leds "^rb:=mikrotik:" + ;; +esac + +migrations_apply system + +exit 0 diff --git a/target/linux/ath79/mikrotik/base-files/lib/functions/mikrotik-caldata.sh b/target/linux/ath79/mikrotik/base-files/lib/functions/mikrotik-caldata.sh new file mode 100644 index 0000000000..9c4016ee5d --- /dev/null +++ b/target/linux/ath79/mikrotik/base-files/lib/functions/mikrotik-caldata.sh @@ -0,0 +1,21 @@ +# Copyright (C) 2019 Robert Marko <robimarko@gmail.com> +# Copyright (C) 2019 Roger Pueyo Centelles <roger.pueyo@guifi.net> +# +# Helper function to extract MAC addresses and calibration data for MikroTik +# + +mikrotik_caldata_extract() { + local part=$1 + local offset=$(($2)) + local count=$(($3)) + local mtd + local erdfile="/lib/firmware/erd.bin" + + mtd=$(find_mtd_chardev $part) + [ -n "$mtd" ] || caldata_die "no mtd device found for partition $part" + + rbextract -e $mtd $erdfile + + dd if=$erdfile of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ + caldata_die "failed to extract calibration data from $mtd" +} diff --git a/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh new file mode 100644 index 0000000000..a568689536 --- /dev/null +++ b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh @@ -0,0 +1,35 @@ +# Copyright (C) 2011 OpenWrt.org + +PART_NAME=firmware + +REQUIRE_IMAGE_METADATA=1 +platform_check_image() { + return 0 +} + +RAMFS_COPY_BIN='fw_printenv fw_setenv nandwrite' +RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' + +platform_do_upgrade_mikrotik_nand() { + CI_KERNPART=none + local fw_mtd=$(find_mtd_part kernel) + fw_mtd="${fw_mtd/block/}" + [ -n "$fw_mtd" ] || return + mtd erase kernel + tar xf "$1" sysupgrade-routerboard/kernel -O | nandwrite -o "$fw_mtd" - + + nand_do_upgrade "$1" +} + +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + mikrotik,routerboard-922uags-5hpacd) + platform_do_upgrade_mikrotik_nand "$1" + ;; + *) + default_do_upgrade "$1" + ;; + esac +} |