diff options
Diffstat (limited to 'target/linux/ath79/image')
24 files changed, 4326 insertions, 0 deletions
diff --git a/target/linux/ath79/image/Makefile b/target/linux/ath79/image/Makefile new file mode 100644 index 0000000000..5f1edcbdb2 --- /dev/null +++ b/target/linux/ath79/image/Makefile @@ -0,0 +1,66 @@ +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +KERNEL_LOADADDR = 0x80060000 + +DEVICE_VARS += CMDLINE CONSOLE IMAGE_SIZE BOARDNAME LOADER_FLASH_OFFS LOADER_TYPE ATH_SOC + +define Build/loader-common + rm -rf $@.src + $(MAKE) -C lzma-loader \ + PKG_BUILD_DIR="$@.src" \ + TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \ + BOARD="$(BOARDNAME)" \ + LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ + $(1) compile loader.$(LOADER_TYPE) + mv "$@.$(LOADER_TYPE)" "$@" + rm -rf $@.src +endef + +define Build/loader-kernel + $(call Build/loader-common,LOADER_DATA="$@") +endef + +define Build/loader-kernel-cmdline + $(call Build/loader-common,LOADER_DATA="$@" KERNEL_CMDLINE="$(CMDLINE)") +endef + + +define Build/loader-okli-compile + $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0 KERNEL_CMDLINE="$(CMDLINE)") +endef + +define Build/loader-okli + dd if=$(KDIR)/loader-$(1).gz bs=7680 conv=sync of="$@.new" + cat "$@" >> "$@.new" + mv "$@.new" "$@" +endef + +define Build/copy-file + cat "$(1)" > "$@" +endef + +define Device/Default + ATH_SOC := + BOARDNAME := + DEVICE_PROFILE = $$(BOARDNAME) + DEVICE_DTS_DIR := ../dts + DEVICE_DTS = $$(ATH_SOC)_$(1) + PROFILES = Default Minimal $$(DEVICE_PROFILE) + MTDPARTS := + BLOCKSIZE := 64k + CONSOLE = ttyS0,115200 + CMDLINE = $$(if $$(BOARDNAME),board=$$(BOARDNAME)) $$(if $$(MTDPARTS),mtdparts=$$(MTDPARTS)) $$(if $$(CONSOLE),console=$$(CONSOLE)) + KERNEL := kernel-bin | append-dtb | lzma | uImage lzma + KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma + COMPILE := + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs +endef + +ifeq ($(SUBTARGET),generic) +include ./tp-link.mk +include ./generic.mk +include ./generic-ubnt.mk +endif +$(eval $(call BuildImage)) diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk new file mode 100644 index 0000000000..c0370ad589 --- /dev/null +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -0,0 +1,274 @@ +DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE + +# mkubntimage is using the kernel image direct +# routerboard creates partitions out of the ubnt header +define Build/mkubntimage + -$(STAGING_DIR_HOST)/bin/mkfwimage \ + -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ + -k $(IMAGE_KERNEL) \ + -r $@ \ + -o $@ +endef + +# all UBNT XM device expect the kernel image to have 1024k while flash, when +# booting the image, the size doesn't matter. +define Build/mkubntimage-split + -[ -f $@ ] && ( \ + dd if=$@ of=$@.old1 bs=1024k count=1; \ + dd if=$@ of=$@.old2 bs=1024k skip=1; \ + $(STAGING_DIR_HOST)/bin/mkfwimage \ + -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ + -k $@.old1 \ + -r $@.old2 \ + -o $@; \ + rm $@.old1 $@.old2 ) +endef + +define Build/mkubntimage2 + -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \ + -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ + -p jffs2:0x50000:0xf60000:0:0:$@ \ + -o $@.new + @mv $@.new $@ +endef + + +# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM) +# UBNT_TYPE e.g. one of (BZ, XM, XW) +# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x) +define Device/ubnt + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 + DEVICE_PROFILE := UBNT + IMAGE_SIZE := 7552k + UBNT_BOARD := XM + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) + IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split +endef + +define Device/ubnt-xm + $(Device/ubnt) + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ohci + UBNT_TYPE := XM + UBNT_CHIP := ar7240 + ATH_SOC := ar7241 +endef + +define Device/ubnt-xw + $(Device/ubnt) + UBNT_TYPE := XW + UBNT_CHIP := ar934x +endef + +define Device/ubnt-bz + $(Device/ubnt) + UBNT_TYPE := BZ + UBNT_CHIP := ar7240 +endef + +define Device/rw2458n + $(Device/ubnt-xm) + DEVICE_TITLE := Ubiquiti RW2458N + BOARDNAME := RW2458N +endef +#TARGET_DEVICES += rw2458n + +define Device/ubnt-airrouter + $(Device/ubnt-xm) + DEVICE_TITLE := Ubiquiti AirRouter + BOARDNAME := UBNT-AR +endef +#TARGET_DEVICES += ubnt-airrouter + +define Device/ubnt-bullet-m + $(Device/ubnt-xm) + DEVICE_TITLE := Ubiquiti Bullet-M + BOARDNAME := UBNT-BM +endef +TARGET_DEVICES += ubnt-bullet-m + +define Device/ubnt-rocket-m + $(Device/ubnt-xm) + DEVICE_TITLE := Ubiquiti Rocket-M + BOARDNAME := UBNT-RM +endef +TARGET_DEVICES += ubnt-rocket-m + +define Device/ubnt-nano-m + $(Device/ubnt-xm) + DEVICE_TITLE := Ubiquiti Nano-M + BOARDNAME := UBNT-NM +endef +TARGET_DEVICES += ubnt-nano-m + +define Device/ubnt-unifi + $(Device/ubnt-bz) + ATH_SOC := ar7241 + DEVICE_TITLE := Ubiquiti UniFi + BOARDNAME := UBNT-UF + DEVICE_PROFILE += UBNTUNIFI +endef +TARGET_DEVICES += ubnt-unifi + +define Device/ubnt-unifiac + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 + DEVICE_PROFILE := UBNT + IMAGE_SIZE := 7744k + MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs),256k(cfg)ro,64k(EEPROM)ro + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) +endef + +define Device/ubnt-unifiac-lite + $(Device/ubnt-unifiac) + DEVICE_TITLE := Ubiquiti UniFi AC-Lite + DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x + DEVICE_PROFILE += UBNTUNIFIACLITE + BOARDNAME := UBNT-UF-AC-LITE +endef +#TARGET_DEVICES += ubnt-unifiac-lite + +define Device/ubnt-unifiac-mesh + $(Device/ubnt-unifiac-lite) + DEVICE_TITLE := Ubiquiti UniFi AC-Mesh +endef +#TARGET_DEVICES += ubnt-unifiac-mesh + +define Device/ubnt-unifiac-pro + $(Device/ubnt-unifiac) + DEVICE_TITLE := Ubiquiti UniFi AC-Pro + DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x + DEVICE_PROFILE += UBNTUNIFIACPRO + BOARDNAME := UBNT-UF-AC-PRO +endef +#TARGET_DEVICES += ubnt-unifiac-pro + +define Device/ubnt-unifi-outdoor + $(Device/ubnt-bz) + DEVICE_TITLE := Ubiquiti UniFi Outdoor + BOARDNAME := UBNT-U20 + DEVICE_PROFILE += UBNTUNIFIOUTDOOR +endef +#TARGET_DEVICES += ubnt-unifi-outdoor + +define Device/ubnt-nano-m-xw + $(Device/ubnt-xw) + DEVICE_TITLE := Ubiquiti Nano M XW + BOARDNAME := UBNT-NM-XW +endef +#TARGET_DEVICES += ubnt-nano-m-xw + +define Device/ubnt-loco-m-xw + $(Device/ubnt-xw) + DEVICE_TITLE := Ubiquiti Loco XW + BOARDNAME := UBNT-LOCO-XW +endef +#TARGET_DEVICES += ubnt-loco-m-xw + +define Device/ubnt-rocket-m-xw + $(Device/ubnt-xw) + DEVICE_TITLE := Ubiquiti Rocket M XW + BOARDNAME := UBNT-RM-XW +endef +#TARGET_DEVICES += ubnt-rocket-m-xw + +define Device/ubnt-rocket-m-ti + $(Device/ubnt-xw) + DEVICE_TITLE := Ubiquiti Rocket M TI + BOARDNAME := UBNT-RM-TI + UBNT_TYPE := TI +endef +#TARGET_DEVICES += ubnt-rocket-m-ti + +define Device/ubnt-air-gateway + $(Device/ubnt-xm) + DEVICE_TITLE := Ubiquiti Air Gateway + BOARDNAME := UBNT-AGW + UBNT_TYPE := AirGW + UBNT_CHIP := ar933x + CONSOLE := ttyATH0,115200 +endef +#TARGET_DEVICES += ubnt-air-gateway + +define Device/ubnt-air-gateway-pro + $(Device/ubnt-xm) + DEVICE_TITLE := Ubiquiti Air Gateway Pro + BOARDNAME := UBNT-AGWP + UBNT_TYPE := AirGWP + UBNT_CHIP := ar934x +endef +#TARGET_DEVICES += ubnt-air-gateway-pro + +define Device/ubdev01 + $(Device/ubnt-xm) + DEVICE_TITLE := Ubiquiti ubDEV01 + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro + BOARDNAME := UBNT-UF + UBNT_BOARD := UBDEV01 +endef +#TARGET_DEVICES += ubdev01 + +define Device/ubnt-routerstation + DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 + DEVICE_PROFILE := UBNT + IMAGE_SIZE := 16128k + IMAGES := sysupgrade.bin factory.bin + IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage + IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE) + KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE) +endef + +define Device/ubnt-rs + $(Device/ubnt-routerstation) + DEVICE_TITLE := Ubiquiti RouterStation + BOARDNAME := UBNT-RS + DEVICE_PROFILE += UBNTRS + UBNT_BOARD := RS + UBNT_TYPE := RSx + UBNT_CHIP := ar7100 +endef +#TARGET_DEVICES += ubnt-rs + +define Device/ubnt-rspro + $(Device/ubnt-routerstation) + DEVICE_TITLE := Ubiquiti RouterStation Pro + BOARDNAME := UBNT-RSPRO + DEVICE_PROFILE += UBNTRSPRO + UBNT_BOARD := RSPRO + UBNT_TYPE := RSPRO + UBNT_CHIP := ar7100pro +endef +#TARGET_DEVICES += ubnt-rspro + +define Device/ubnt-ls-sr71 + $(Device/ubnt-routerstation) + DEVICE_TITLE := Ubiquiti LS-SR71 + BOARDNAME := UBNT-LS-SR71 + UBNT_BOARD := LS-SR71 + UBNT_TYPE := LS-SR71 + UBNT_CHIP := ar7100 +endef +#TARGET_DEVICES += ubnt-ls-sr71 + +define Device/ubnt-uap-pro + DEVICE_TITLE := Ubiquiti UAP Pro + KERNEL_SIZE := 1536k + IMAGE_SIZE := 15744k + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware) + UBNT_TYPE := BZ + UBNT_CHIP := ar934x + BOARDNAME := UAP-PRO + DEVICE_PROFILE := UBNT UAPPRO + KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0 + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) + IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2 +endef + +define Device/ubnt-unifi-outdoor-plus + $(Device/ubnt-uap-pro) + DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus + UBNT_CHIP := ar7240 + BOARDNAME := UBNT-UOP + DEVICE_PROFILE := UBNT +endef diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk new file mode 100644 index 0000000000..dab98b7225 --- /dev/null +++ b/target/linux/ath79/image/generic.mk @@ -0,0 +1,93 @@ +define Build/netgear-squashfs + rm -rf $@.fs $@.squashfs + mkdir -p $@.fs/image + cp $@ $@.fs/image/uImage + $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \ + $@.fs $@.squashfs \ + -noappend -root-owned -be -b 65536 \ + $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH)) + + dd if=/dev/zero bs=1k count=1 >> $@.squashfs + mkimage \ + -A mips -O linux -T filesystem -C none \ + -M $(NETGEAR_KERNEL_MAGIC) \ + -a 0xbf070000 -e 0xbf070000 \ + -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \ + -d $@.squashfs $@ + rm -rf $@.squashfs $@.fs +endef + +define Build/netgear-uImage + $(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC)) +endef + +define Device/ew_dorin + ATH_SOC := ar9331 + DEVICE_TITLE := Embedded Wireless Dorin + DEVICE_PACKAGES := kmod-usb-chipidea2 +endef + +TARGET_DEVICES += ew_dorin + +define Device/gl_ar150 + ATH_SOC := ar9330 + DEVICE_TITLE := GL.iNet GL-AR150 + DEVICE_PACKAGES := kmod-usb-chipidea2 + IMAGE_SIZE := 16000k +endef +TARGET_DEVICES += gl_ar150 + +define Device/om5p_ac + ATH_SOC := qca9558 + DEVICE_TITLE := OpenMesh OM5P-AC + DEVICE_PROFILE := OM5P-AC + DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x om-watchdog +endef + +TARGET_DEVICES += om5p_ac + +define Device/netgear_wndr3700 + ATH_SOC:=ar7100 + DEVICE_TITLE := NETGEAR WNDR3700 + DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset + NETGEAR_KERNEL_MAGIC := 0x33373030 + NETGEAR_BOARD_ID := WNDR3700 + IMAGE_SIZE := 7680k + IMAGES := sysupgrade.bin factory.img factory-NA.img + KERNEL := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma + KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma + IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs + IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE) + IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE) + IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE) +endef +#TARGET_DEVICES += netgear_wndr3700 + +define Device/netgear_wndr3700v2 + $(Device/netgear_wndr3700) + DEVICE_TITLE := NETGEAR WNDR3700 v2 + NETGEAR_BOARD_ID := WNDR3700v2 + NETGEAR_KERNEL_MAGIC := 0x33373031 + NETGEAR_HW_ID := 29763654+16+64 + IMAGE_SIZE := 15872k + IMAGES := sysupgrade.bin factory.img +endef +#TARGET_DEVICES += netgear_wndr3700v2 + +define Device/netgear_wndr3800 + $(Device/netgear_wndr3700v2) + ATH_SOC := ar7161 + DEVICE_TITLE := NETGEAR WNDR3800 + NETGEAR_BOARD_ID := WNDR3800 + NETGEAR_HW_ID := 29763654+16+128 +endef +TARGET_DEVICES += netgear_wndr3800 + +define Device/buffalo_wzr-hp-g450h + ATH_SOC := ar7242 + DEVICE_TITLE := Buffalo WZR-HP-G450H + DEVICE_PROFILE := WZR-HP-G450H + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport +endef + +TARGET_DEVICES += buffalo_wzr-hp-g450h diff --git a/target/linux/ath79/image/legacy.mk b/target/linux/ath79/image/legacy.mk new file mode 100644 index 0000000000..cbc859dd08 --- /dev/null +++ b/target/linux/ath79/image/legacy.mk @@ -0,0 +1,1058 @@ +rootfs_type=$(patsubst squashfs-%,squashfs,$(1)) + +# $(1): rootfs type. +# $(2): board name. +define imgname +$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1)) +endef + +define rootfs_align +$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1)))))) +endef + +define sysupname +$(call imgname,$(1),$(2))-sysupgrade.bin +endef + +define factoryname +$(call imgname,$(1),$(2))-factory.bin +endef + +COMMA:=, + +define mkcmdline +$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3)) +endef + +define mtdpartsize +$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024))) +endef + +# $(1) : name of image build method to be used, e.g., AthLzma. +# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc. +# $(3) : name of the profile to be defined. +# $(4) : board name. +# $(5)~$(7) : arguments for $(mkcmdline) +# board=$(1) console=$(2),$(3) +# $(8)~$(14): extra arguments. +define SingleProfile + # $(1): action name, e.g. loader, buildkernel, squashfs, etc. + define Image/Build/Profile/$(3) + $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14)) + endef +endef + +LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR) + +VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux +UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage + +# $(1): input file. +# $(2): output file. +# $(3): extra arguments for lzma. +define CompressLzma + $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2) +endef + +define PatchKernel + cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1) + $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))" +endef + +define PatchKernel/initramfs + $(call PatchKernel,$(1),$(2),-initramfs) + cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin +endef + +# $(1): board name. +# $(2): kernel command line. +# $(3): extra argumetns for lzma. +# $(4): name suffix, e.g. "-initramfs". +define PatchKernelLzma + cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1) + $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))" + $(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3)) +endef + +define PatchKernelGzip + cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1) + $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))" + gzip -9n -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz +endef + +ifneq ($(SUBTARGET),mikrotik) +# $(1): compression method of the data. +# $(2): extra arguments. +# $(3): input data file. +# $(4): output file. +define MkuImage + mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \ + -e 0x80060000 -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \ + -d $(3) $(4) +endef + +# $(1): board name. +# $(2): kernel command line. +# $(3): extra arguments for lzma. +# $(4): name suffix, e.g. "-initramfs". +# $(5): extra arguments for mkimage. +define MkuImageLzma + $(call PatchKernelLzma,$(1),$(2),$(3),$(4)) + $(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage) +endef + +define MkuImageLzma/initramfs + $(call PatchKernelLzma,$(1),$(2),$(3),-initramfs) + $(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin) +endef + +define MkuImageGzip + $(call PatchKernelGzip,$(1),$(2)) + $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage) +endef + +define MkuImageGzip/initramfs + $(call PatchKernelGzip,$(1),$(2),-initramfs) + $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin) +endef + +define MkuImageOKLI + $(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli) +endef +endif + +# $(1): name of the 1st file. +# $(2): size limit of the 1st file if it is greater than 262144, or +# the erase size of the flash if it is greater than zero and less +# than 262144 +# $(3): name of the 2nd file. +# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise +# it is the size limit of the output file +# $(5): name of the output file. +# $(6): padding size. +define CatFiles + if [ $(2) -eq 0 ]; then \ + filename="$(3)"; fstype=$${filename##*\.}; \ + case "$${fstype}" in \ + *) bs=`stat -c%s $(1)`;; \ + esac; \ + ( dd if=$(1) bs=$${bs} conv=sync; cat $(3) ) > $(5); \ + if [ -n "$(6)" ]; then \ + case "$${fstype}" in \ + squashfs*) \ + padjffs2 $(5) $(6); \ + ;; \ + esac; \ + fi; \ + if [ `stat -c%s $(5)` -gt $(4) ]; then \ + echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \ + rm -f $(5); \ + fi; \ + else if [ $(2) -gt 262144 ]; then \ + if [ `stat -c%s "$(1)"` -gt $(2) ]; then \ + echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \ + else if [ `stat -c%s $(3)` -gt $(4) ]; then \ + echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \ + else \ + ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \ + fi; fi; \ + else \ + ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \ + if [ `stat -c%s $(5)` -gt $(4) ]; then \ + echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \ + rm -f $(5); \ + fi; \ + fi; fi +endef + +# $(1): rootfs type. +# $(2): board name. +# $(3): kernel image size limit. +# $(4): rootfs image size limit. +# $(5): padding argument for padjffs2. +Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5))) +Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5)) +Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2))) + +# $(1): ubinize ini file +# $(2): working directory +# $(3): output file +# $(4): physical erase block size +# $(5): minimum I/O unit size +# $(6): custom options +define ubinize + $(CP) $(1) $(2) + ( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1)) +endef + +# +# Embed lzma-compressed kernel inside lzma-loader. +# +# $(1), suffix of output filename, e.g. generic, lowercase board name, etc. +# $(2), suffix of target file to build, e.g. bin, gz, elf +# $(3), kernel command line to pass from lzma-loader to kernel +# $(4), unused here +# $(5), suffix of kernel filename, e.g. -initramfs, or empty +define Image/BuildLoader + -rm -rf $(KDIR)/lzma-loader + $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\ + LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ + LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \ + compile loader.$(2) + -$(if $(5),$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)) +endef + +# +# Build lzma-loader alone which will search for lzma-compressed kernel identified by +# uImage header with magic "OKLI" at boot time. +# +# $(4), offset into the flash space to start searching uImage magic "OKLI". +# $(5), size of search range starting at $(4). With 0 as the value, uImage +# header is expected to be at precisely $(4) +define Image/BuildLoaderAlone + -rm -rf $(KDIR)/lzma-loader + $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \ + LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ + BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \ + compile loader.$(2) +endef + +define Build/Clean + $(LOADER_MAKE) clean +endef + +alfa_ap120c_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,13312k(rootfs),1536k(kernel),1152k(unknown)ro,64k(art)ro;spi0.1:-(unknown) +alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware) +alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) +alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro +all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art)ro +all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro +ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k@0x40000(firmware) +ap121_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) +ap121_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,10944k(rootfs),4992k(kernel),64k(nvram),64k(art)ro,15936k@0x50000(firmware) +ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art)ro,7808k@0x50000(firmware) +ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) +ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware) +ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware) +ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) +ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) +ap152_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) +bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro +cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro +cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro +cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro +cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware) +cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware) +cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro +cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro +cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro +cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art)ro,13632k@0xa0000(firmware) +eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro +db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) +dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro +dlan_hotspot_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(Config1)ro,64k(Config2)ro,7872k@0x40000(firmware),64k(art)ro +dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,7680k@0x70000(firmware),64k(art)ro +dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,15872k@0x70000(firmware),64k(art)ro +cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy) +cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) +esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) +esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) +epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) +f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware) +dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy) +dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) +planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro +whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro +wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),64k(nvram)ro,64k(art)ro +wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro +wnr2000_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro +wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro +wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro +r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata)ro,256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter) +tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro +wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata)ro,512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) +zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware) +mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro +zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi) + +define Image/BuildKernel + cp $(KDIR)/vmlinux.elf $(VMLINUX).elf + cp $(KDIR)/vmlinux $(VMLINUX).bin + dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync + $(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin) + cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf + -mkdir -p $(KDIR_TMP) +endef + +define Image/BuildKernel/Initramfs + cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf + cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin + dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync + $(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin) + cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf + $(call Image/Build/Initramfs) +endef + +Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3)) + +define Image/Build/WRT400N + $(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \ + fi +endef + + +define Image/Build/CameoAP94/buildkernel + $(call MkuImageLzma,$(2),$(3) $(4)) + $(call MkuImageLzma,$(2)-fat,$(3) $(5)) +endef + +define Image/Build/CameoAP94 + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(eval fwsize_fat=$(call mtdpartsize,firmware,$(5))) + $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + ( \ + dd if=$(call sysupname,$(1),$(2)); \ + echo -n "$(6)"; \ + ) > $(call imgname,$(1),$(2))-backup-loader.bin; \ + if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \ + echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \ + else \ + ( \ + dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \ + echo -n "$(7)"; \ + ) > $(call factoryname,$(1),$(2)); \ + fi; \ + fi + $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64) + if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \ + echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \ + sh $(TOPDIR)/scripts/combined-image.sh \ + "$(KDIR_TMP)/$(2)-fat.bin" \ + "$(KDIR_TMP)/$(2)-fat.dummy" \ + $(call sysupname,$(1),$(2)-fat); \ + fi +endef + +define Image/Build/WZRHP + $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(3)-4*$(4)*1024)),$(4)) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + ( \ + echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \ + dd if=$(call sysupname,$(1),$(2)); \ + ) > $(call imgname,$(1),$(2))-tftp.bin; \ + buffalo-enc -p $(5) -v 1.99 \ + -i $(call sysupname,$(1),$(2)) \ + -o $(KDIR_TMP)/$(2).enc; \ + buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \ + -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \ + -i $(KDIR_TMP)/$(2).enc \ + -o $(call factoryname,$(1),$(2)); \ + fi +endef + +Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3)) +Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) +Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4)) + +Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3)) +Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) +Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4)) + + +Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +define Image/Build/WHRHPG300N + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + ( \ + echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \ + dd if=$(call sysupname,$(1),$(2)); \ + ) > $(call imgname,$(1),$(2))-tftp.bin; \ + buffalo-enc -p $(5) -v 1.99 \ + -i $(call sysupname,$(1),$(2)) \ + -o $(KDIR_TMP)/$(2).enc; \ + buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \ + -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \ + -i $(KDIR_TMP)/$(2).enc \ + -o $(call factoryname,$(1),$(2)); \ + fi +endef + + +define Image/Build/Cameo + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + factory_size=$$(($(fwsize) - $(6))); \ + ( \ + dd if=$(call sysupname,$(1),$(2)) bs=$${factory_size} conv=sync; \ + echo -n $(5); \ + ) > $(call factoryname,$(1),$(2)); \ + fi +endef + +Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout)) +Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536) +Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout)) + +Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout)) +Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536) +Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout)) + +Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout)) +Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536) +Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout)) + +Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M)) +Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26) +Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M)) + +Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26) +Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout)) +Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26) +Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout)) + +Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M)) +Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26) +Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M)) + +define Image/Build/CameoHornet + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + for r in $(7); do \ + [ -n "$$r" ] && dashr="-$$r" || dashr=; \ + [ -z "$$r" ] && r="DEF"; \ + mkcameofw -M HORNET -R "$$r" -S $(5) -V $(6) -c \ + -K $(8) -I $(fwsize) \ + -k "$(call sysupname,$(1),$(2))" \ + -o $(call imgname,$(1),$(2))-factory$$dashr.bin; \ + true; \ + done; \ + fi +endef + +Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout)) +Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000) +Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout)) + +Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M)) +Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000) +Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M)) + +define Image/Build/dLAN + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) + $(eval kernsize=$(call mtdpartsize,kernel,$(4))) + $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) +endef + +Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) +Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +define Image/Build/Ath + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) + $(eval kernsize=$(call mtdpartsize,kernel,$(4))) + $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) +endef + +Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4)) +Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) +Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4)) + +Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) +Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + + +Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +define Image/Build/Belkin + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(eval kernsize=$(call mtdpartsize,kernel,$(4))) + $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) + $(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize)) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \ + -n "uImage" \ + -i $(KDIR_TMP)/vmlinux-$(2).uImage \ + -o $(KDIR_TMP)/$(2)-uImage; \ + edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \ + -n "rootfs" \ + -i $(KDIR)/root.$(1) \ + -o $(KDIR_TMP)/$(2)-rootfs; \ + ( \ + dd if=$(KDIR_TMP)/$(2)-rootfs; \ + dd if=$(KDIR_TMP)/$(2)-uImage; \ + ) > "$(call factoryname,$(1),$(2))"; \ + fi +endef + +define Image/Build/EnGenius + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) + $(eval kernsize=$(call mtdpartsize,kernel,$(4))) + $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + mksenaofw -e $(call sysupname,$(1),$(2)) \ + -o $(call imgname,$(1),$(2))-factory.dlf \ + -r 0x101 -p $(7) -t 2; \ + fi +endef + +Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + + +Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3)) + +define Image/Build/PB4X + dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ + of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync + dd if=$(KDIR)/root.$(1) \ + of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync + -sh $(TOPDIR)/scripts/combined-image.sh \ + "$(call imgname,kernel,$(2)).bin" \ + "$(call imgname,$(1),$(2)-rootfs).bin" \ + $(call sysupname,$(1),$(2)) +endef + + +Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3)) +Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3)) + +define Image/Build/MyLoader + $(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024)))) + $(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin) + $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage)) + if [ -e "$(fwimage)" ]; then \ + $(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \ + -p0x00030000:0:al:0x80060000:firmware:$(fwimage) \ + $(call imgname,$(1),$(2))-$(5)-factory.img; \ + echo -n "" > $(KDIR_TMP)/empty.bin; \ + sh $(TOPDIR)/scripts/combined-image.sh \ + $(fwimage) $(KDIR_TMP)/empty.bin \ + $(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \ + fi +endef + +Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout)) +Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0) + +define Image/Build/Planex/buildkernel + [ -e "$(KDIR)/loader-$(2).gz" ] + $(call MkuImageOKLI,$(2)) + ( \ + dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \ + dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \ + ) > $(KDIR_TMP)/kernel-$(2).bin + $(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage) +endef + +define Image/Build/Planex + $(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout))) + $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + $(STAGING_DIR_HOST)/bin/mkplanexfw \ + -B $(2) \ + -v 2.00.00 \ + -i $(call sysupname,$(1),$(2)) \ + -o $(call factoryname,$(1),$(2)); \ + fi +endef + + +Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +define Image/Build/ALFA + $(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6)) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + rm -rf $(KDIR)/$(1); \ + mkdir -p $(KDIR)/$(1); \ + cd $(KDIR)/$(1); \ + cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \ + cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \ + $(TAR) c \ + $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ + -C $(KDIR)/$(1) $(7) $(8) \ + | gzip -9nc > $(call factoryname,$(1),$(2)); \ + ( \ + echo WRM7222C | dd bs=32 count=1 conv=sync; \ + echo -ne '\xfe'; \ + ) >> $(call factoryname,$(1),$(2)); \ + fi +endef + + +Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +define Image/Build/Senao + mkdir -p $(KDIR_TMP)/$(2)/ + touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2) + -$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/ + dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ + of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync + dd if=$(KDIR)/root.$(1) \ + of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync + ( \ + cd $(KDIR_TMP)/$(2)/; \ + $(TAR) -c \ + $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ + * | gzip -9nc > $(call factoryname,$(1),$(2)) \ + ) + -rm -rf $(KDIR_TMP)/$(2)/ + -sh $(TOPDIR)/scripts/combined-image.sh \ + $(KDIR_TMP)/vmlinux-$(2).uImage \ + $(KDIR)/root.$(1) \ + $(call sysupname,$(1),$(2)) +endef + +define Image/Build/CyberTAN + echo -n '' > $(KDIR_TMP)/empty.bin + -$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \ + -f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \ + -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \ + $(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \ + -i $(KDIR)/image.tmp \ + -o $(call sysupname,$(1),$(2)) + -$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \ + -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \ + $(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \ + -i $(KDIR)/image.tmp \ + -o $(call factoryname,$(1),$(2)) + -rm $(KDIR)/image.tmp +endef + +Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000) +Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage) +Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5)) + +Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5)) + + +Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) + +define Image/Build/Netgear/buildkernel + $(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5)) + -rm -rf $(KDIR_TMP)/$(2) + mkdir -p $(KDIR_TMP)/$(2)/image + cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage + $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \ + $(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \ + -noappend -root-owned -be -b 65536 \ + $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH)) + ( \ + cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \ + dd if=/dev/zero bs=1k count=1 \ + ) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 + mkimage -A mips -O linux -T filesystem -C none -M $(5) \ + -a 0xbf070000 -e 0xbf070000 \ + -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \ + -d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \ + $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs +endef + +define Image/Build/Netgear + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64) + if [ -e $(call sysupname,$(1),$(2)) ]; then \ + for r in $(7) ; do \ + [ -n "$$r" ] && dashr="-$$r" || dashr= ; \ + $(STAGING_DIR_HOST)/bin/mkdniimg \ + -B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \ + -i $(call sysupname,$(1),$(2)) \ + -o $(call imgname,$(1),$(2))-factory$$dashr.img; \ + done; \ + fi + if [ "$2" = "wnr2000" ]; then \ + dd if=$(KDIR)/root.$(1) \ + of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \ + fi +endef + + +Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) +Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5)) + +define Image/Build/NetgearLzma + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64) +endef + + +Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) + +# $(1): (empty) +# $(2): Board name (small caps) +# $(3): Kernel board specific cmdline +# $(4): Kernel mtdparts definition +# $(5): U-Boot magic +define Image/Build/NetgearNAND/buildkernel + $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) + $(call PatchKernelLzma,$(2),$(3) $(4),-d20) + dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ + of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \ + bs=$$(($(kernelsize)-131072-2*64-1)) \ + count=1 conv=sync + $(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage) + echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage + # create a fake rootfs image + dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1 + mkimage -A mips -O linux -T filesystem -C none \ + -a 0xbf070000 -e 0xbf070000 \ + -n 'MIPS $(VERSION_DIST) fakeroot' \ + -d $(KDIR_TMP)/fakeroot-$(2) \ + -M $(5) \ + $(KDIR_TMP)/fakeroot-$(2).uImage + # append the fake rootfs image to the kernel, it will reside in the last + # erase block of the kernel partition + cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage +endef + + +# $(1): rootfs image suffix +# $(2): Board name (small caps) +# $(3): Kernel board specific cmdline +# $(4): Kernel mtdparts definition +# $(5): U-Boot magic +# $(6): Board name (upper caps) +# $(7): firmware region code (not used yet) +# $(8): DNI Hardware version +# $(9): suffix of the configuration file for ubinize +define Image/Build/NetgearNAND + $(eval firmwaresize=$(call mtdpartsize,firmware,$(4))) + $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) + $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img) + $(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs + echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof + $(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5) + ( \ + dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \ + dd if=$(KDIR_TMP)/$(2)-root.ubi \ + ) > $(imageraw) + $(STAGING_DIR_HOST)/bin/mkdniimg \ + -B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \ + -i $(imageraw) \ + -o $(call imgname,ubi,$(2))-factory.img + + $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage) +endef + +ZYXEL_UBOOT = $(KDIR)/u-boot-nbg460n_550n_550nh.bin +ZYXEL_UBOOT_BIN = $(wildcard $(BIN_DIR)/u-boot-nbg460n_550n_550nh/u-boot.bin) + +Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3)) + +define Image/Build/ZyXEL + $(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + if [ ! -f $(ZYXEL_UBOOT) ]; then \ + echo "Warning: $(ZYXEL_UBOOT) not found" >&2; \ + else \ + $(STAGING_DIR_HOST)/bin/mkzynfw \ + -B $(4) \ + -b $(ZYXEL_UBOOT) \ + -r $(call sysupname,$(1),$(2)):0x10000 \ + -o $(call factoryname,$(1),$(2)); \ + fi; fi +endef + +define Image/Build/ZyXELNAND/buildkernel + $(eval kernelsize=$(call mtdpartsize,kernel,$(5))) + $(call MkuImageLzma,$(2),$(3) $(5) $(6)) + mkdir -p $(KDIR_TMP)/$(2)/image/boot + cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage + $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \ + --pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \ + -o $(KDIR_TMP)/$(2)-kernel.jffs2 \ + -d $(KDIR_TMP)/$(2)/image \ + 2>&1 1>/dev/null | awk '/^.+$$/' + -rm -rf $(KDIR_TMP)/$(2) +endef + +define Image/Build/ZyXELNAND + if [ "$(1)" != "squashfs" ]; then \ + echo Only squashfs is supported; \ + return 0; \ + fi + $(eval firmwaresize=$(call mtdpartsize,firmware,$(4))) + $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) + $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img) + $(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img + $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5) + ( \ + dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \ + dd if=$(KDIR_TMP)/$(2)-root.ubi \ + ) > $(imageraw) + dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \ + bs=128k conv=sync + $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2) +endef + + +Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2)) +Image/Build/OpenMesh/initramfs=$(call MkuImageLzma/initramfs,$(2),) + +define Image/Build/OpenMesh + -sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \ + "$(4)" \ + "$(BUILD_DIR)/fwupgrade.cfg-$(4)" \ + "$(KDIR_TMP)/vmlinux-$(2).uImage" \ + "$(KDIR)/root.$(1)" + -sh $(TOPDIR)/scripts/combined-ext-image.sh \ + "$(4)" "$(call factoryname,$(1),$(2))" \ + "$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \ + "$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \ + "$(KDIR)/root.$(1)" "rootfs" + if [ -e "$(call factoryname,$(1),$(2))" ]; then \ + cp "$(call factoryname,$(1),$(2))" "$(call sysupname,$(1),$(2))"; \ + fi +endef + + +Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +define Image/Build/Zcomax + $(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + $(STAGING_DIR_HOST)/bin/mkzcfw \ + -B $(2) \ + -k $(KDIR_TMP)/vmlinux-$(2).uImage \ + -r $(KDIR)/root.$(1) \ + -o $(call imgname,$(1),$(2))-factory.img; \ + fi +endef + + +# $(1): template name to be defined. +# $(2): squashfs suffix to be used. +define BuildTemplate + # $(1) : name of build method. + # $(2) : board name. + # $(3) : kernel command line. + # $(4)~$(8): extra arguments. + define Image/Build/Template/$(1)/initramfs + $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) + endef + define Image/Build/Template/$(1)/loader + $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) + endef + define Image/Build/Template/$(1)/buildkernel + $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) + endef + define Image/Build/Template/$(1)/squashfs + $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) + endef +endef + +$(eval $(call BuildTemplate,squashfs-only)) +$(eval $(call BuildTemplate,64k,-64k)) +$(eval $(call BuildTemplate,64kraw,-raw)) +$(eval $(call BuildTemplate,64kraw-nojffs,-raw)) +$(eval $(call BuildTemplate,128k)) +$(eval $(call BuildTemplate,128kraw,-raw)) +$(eval $(call BuildTemplate,256k)) +$(eval $(call BuildTemplate,all)) + +ifeq ($(SUBTARGET),generic) +$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2)) +$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image)) +$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image)) + +$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage,65536)) + +$(eval $(call SingleProfile,AthLzma,64k,ALFAAP120C,alfa-ap120c,ALFA-AP120C,ttyS0,115200,$$(alfa_ap120c_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144)) +$(eval $(call SingleProfile,AthLzma,64k,AP121_8M,ap121-8M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_8M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP121_16M,ap121-16M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_16M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP152_16M,ap152-16M,AP152,ttyS0,115200,$$(ap152_mtdlayout_16M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage)) +$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) + +$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC)) + +$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,"")) + +$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00")) +$(eval $(call SingleProfile,CameoAP135,64kraw,TEW823DRU,tew-823dru,TEW-823DRU,ttyS0,115200,$$(tew823dru_mtdlayout) mem=256M,"00AP135AR9558-RT-131129-00")) + +$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) +$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) +$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) + +$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA")) + +$(eval $(call SingleProfile,CyberTANGZIP,64k,E2100L,e2100l,E2100L,ttyS0,115200,,1.00.01)) +$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01)) + +$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01)) + +$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) +$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01)) +$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) + +$(eval $(call SingleProfile,dLANLzma,64k,dLAN_Hotspot,dlan-hotspot,dLAN-Hotspot,ttyATH0,115200,$$(dlan_hotspot_mtdlayout) mem=64M,KRuImage,65536)) +$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) mem=128M,KRuImage,65536)) +$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) mem=128M,KRuImage,65536)) + +$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e)) +$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61)) +$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71)) + +$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M)) +$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M)) +$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M)) +$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M)) + +$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,wnr2200,"" NA,)) + +$(eval $(call SingleProfile,OpenMesh,squashfs-only,A60,a60,,,,A60)) +$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P)) +$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P)) +$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5PAC,om5pac,,,,OM5PAC)) +$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600)) +$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900)) +$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR1750,mr1750,,,,MR1750)) + +$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200)) +$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200)) +$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200)) +$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200)) +$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200)) +$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200)) +$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200)) + +$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200)) +$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200)) + +$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout))) + +$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200)) + +$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH)) +$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2)) +$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H)) +$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H)) +$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP)) +$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2)) + +$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout))) +$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout))) + +endif # ifeq ($(SUBTARGET),generic) + + +ifeq ($(SUBTARGET),tiny) + +$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00")) +$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02")) +$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01")) + +$(eval $(call SingleProfile,CameoAP99,64kraw,EBR2310C1,ebr-2310-c1,EBR-2310-C1,ttyS0,115200,"AP91-AR7240-RT-090223-03")) +$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00")) +$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05")) + +$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00")) +$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00")) + +$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03")) +$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02")) +$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00")) +$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05")) +$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02")) + +$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,"")) +$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA")) + +$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M)) +$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M)) + +$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32)) +$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,)) +$(eval $(call SingleProfile,Netgear,64kraw,WNR2000,wnr2000,WNR2000,ttyS0,115200,$$(wnr2000_mtdlayout),0x32303031,WNR2000,"" NA,)) +$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",)) +$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",)) +$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",)) +$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",)) +$(eval $(call SingleProfile,Netgear,64kraw,WPN824N,wpn824n,WPN824N,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31313030,WPN824N,"" NA,)) + +$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N)) +$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N)) +$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN)) +$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N)) + +$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N)) + +endif # ifeq ($(SUBTARGET),tiny) + + +ifeq ($(SUBTARGET),nand) + +$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300)) +$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300)) +$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300)) + +$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M)) + +endif # ifeq ($(SUBTARGET),nand) + +define Image/Build/squashfs + cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw + cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k + $(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64 + $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) + dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync +endef + +define Image/Prepare + $(if $(wildcard $(ZYXEL_UBOOT_BIN)),cp $(ZYXEL_UBOOT_BIN) $(ZYXEL_UBOOT)) + $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma) +ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) + $(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma) + $(call Image/BuildLoader,generic,elf,,,-initramfs) +endif + $(call Image/BuildLoader,generic,elf) +endef + +define Image/Prepare/Profile + $(call Image/Build/Profile/$(1),loader) +endef + +define Image/Build/Profile + $(call Image/Build/Profile/$(1),buildkernel) + $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(call Image/Build/Profile/$(1),initramfs)) + $(call Image/Build/Profile/$(1),$(2)) +endef + +# $(1): filesystem type. +define Image/Build + $(call Image/Build/$(call rootfs_type,$(1)),$(1)) +endef diff --git a/target/linux/ath79/image/lzma-loader/Makefile b/target/linux/ath79/image/lzma-loader/Makefile new file mode 100644 index 0000000000..9b81e87306 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/Makefile @@ -0,0 +1,66 @@ +# +# Copyright (C) 2011 OpenWrt.org +# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk + +LZMA_TEXT_START := 0x80a00000 +LOADADDR := 0x80060000 +LOADER := loader.bin +LOADER_NAME := $(basename $(notdir $(LOADER))) +LOADER_DATA := +TARGET_DIR := +FLASH_OFFS := +FLASH_MAX := +BOARD := + +ifeq ($(TARGET_DIR),) +TARGET_DIR := $(KDIR) +endif + +LOADER_BIN := $(TARGET_DIR)/$(LOADER_NAME).bin +LOADER_GZ := $(TARGET_DIR)/$(LOADER_NAME).gz +LOADER_ELF := $(TARGET_DIR)/$(LOADER_NAME).elf + +PKG_NAME := lzma-loader +PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME) + +.PHONY : loader-compile loader.bin loader.elf loader.gz + +$(PKG_BUILD_DIR)/.prepared: + mkdir $(PKG_BUILD_DIR) + $(CP) ./src/* $(PKG_BUILD_DIR)/ + touch $@ + +loader-compile: $(PKG_BUILD_DIR)/.prepared + $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \ + LZMA_TEXT_START=$(LZMA_TEXT_START) \ + LOADADDR=$(LOADADDR) \ + LOADER_DATA=$(LOADER_DATA) \ + FLASH_OFFS=$(FLASH_OFFS) \ + FLASH_MAX=$(FLASH_MAX) \ + BOARD="$(BOARD)" \ + clean all + +loader.gz: $(PKG_BUILD_DIR)/loader.bin + gzip -nc9 $< > $(LOADER_GZ) + +loader.elf: $(PKG_BUILD_DIR)/loader.elf + $(CP) $< $(LOADER_ELF) + +loader.bin: $(PKG_BUILD_DIR)/loader.bin + $(CP) $< $(LOADER_BIN) + +download: +prepare: $(PKG_BUILD_DIR)/.prepared +compile: loader-compile + +install: + +clean: + rm -rf $(PKG_BUILD_DIR) + diff --git a/target/linux/ath79/image/lzma-loader/src/LzmaDecode.c b/target/linux/ath79/image/lzma-loader/src/LzmaDecode.c new file mode 100644 index 0000000000..cb8345377e --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/LzmaDecode.c @@ -0,0 +1,584 @@ +/* + LzmaDecode.c + LZMA Decoder (optimized for Speed version) + + LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this Code, expressly permits you to + statically or dynamically link your Code (or bind by name) to the + interfaces of this file without subjecting your linked Code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#include "LzmaDecode.h" + +#define kNumTopBits 24 +#define kTopValue ((UInt32)1 << kNumTopBits) + +#define kNumBitModelTotalBits 11 +#define kBitModelTotal (1 << kNumBitModelTotalBits) +#define kNumMoveBits 5 + +#define RC_READ_BYTE (*Buffer++) + +#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ + { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} + +#ifdef _LZMA_IN_CB + +#define RC_TEST { if (Buffer == BufferLim) \ + { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ + BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} + +#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 + +#else + +#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } + +#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 + +#endif + +#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } + +#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) +#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; +#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; + +#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ + { UpdateBit0(p); mi <<= 1; A0; } else \ + { UpdateBit1(p); mi = (mi + mi) + 1; A1; } + +#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) + +#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ + { int i = numLevels; res = 1; \ + do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ + res -= (1 << numLevels); } + + +#define kNumPosBitsMax 4 +#define kNumPosStatesMax (1 << kNumPosBitsMax) + +#define kLenNumLowBits 3 +#define kLenNumLowSymbols (1 << kLenNumLowBits) +#define kLenNumMidBits 3 +#define kLenNumMidSymbols (1 << kLenNumMidBits) +#define kLenNumHighBits 8 +#define kLenNumHighSymbols (1 << kLenNumHighBits) + +#define LenChoice 0 +#define LenChoice2 (LenChoice + 1) +#define LenLow (LenChoice2 + 1) +#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) +#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) +#define kNumLenProbs (LenHigh + kLenNumHighSymbols) + + +#define kNumStates 12 +#define kNumLitStates 7 + +#define kStartPosModelIndex 4 +#define kEndPosModelIndex 14 +#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) + +#define kNumPosSlotBits 6 +#define kNumLenToPosStates 4 + +#define kNumAlignBits 4 +#define kAlignTableSize (1 << kNumAlignBits) + +#define kMatchMinLen 2 + +#define IsMatch 0 +#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) +#define IsRepG0 (IsRep + kNumStates) +#define IsRepG1 (IsRepG0 + kNumStates) +#define IsRepG2 (IsRepG1 + kNumStates) +#define IsRep0Long (IsRepG2 + kNumStates) +#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) +#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) +#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) +#define LenCoder (Align + kAlignTableSize) +#define RepLenCoder (LenCoder + kNumLenProbs) +#define Literal (RepLenCoder + kNumLenProbs) + +#if Literal != LZMA_BASE_SIZE +StopCompilingDueBUG +#endif + +int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) +{ + unsigned char prop0; + if (size < LZMA_PROPERTIES_SIZE) + return LZMA_RESULT_DATA_ERROR; + prop0 = propsData[0]; + if (prop0 >= (9 * 5 * 5)) + return LZMA_RESULT_DATA_ERROR; + { + for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); + for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); + propsRes->lc = prop0; + /* + unsigned char remainder = (unsigned char)(prop0 / 9); + propsRes->lc = prop0 % 9; + propsRes->pb = remainder / 5; + propsRes->lp = remainder % 5; + */ + } + + #ifdef _LZMA_OUT_READ + { + int i; + propsRes->DictionarySize = 0; + for (i = 0; i < 4; i++) + propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8); + if (propsRes->DictionarySize == 0) + propsRes->DictionarySize = 1; + } + #endif + return LZMA_RESULT_OK; +} + +#define kLzmaStreamWasFinishedId (-1) + +int LzmaDecode(CLzmaDecoderState *vs, + #ifdef _LZMA_IN_CB + ILzmaInCallback *InCallback, + #else + const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, + #endif + unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) +{ + CProb *p = vs->Probs; + SizeT nowPos = 0; + Byte previousByte = 0; + UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; + UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; + int lc = vs->Properties.lc; + + #ifdef _LZMA_OUT_READ + + UInt32 Range = vs->Range; + UInt32 Code = vs->Code; + #ifdef _LZMA_IN_CB + const Byte *Buffer = vs->Buffer; + const Byte *BufferLim = vs->BufferLim; + #else + const Byte *Buffer = inStream; + const Byte *BufferLim = inStream + inSize; + #endif + int state = vs->State; + UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; + int len = vs->RemainLen; + UInt32 globalPos = vs->GlobalPos; + UInt32 distanceLimit = vs->DistanceLimit; + + Byte *dictionary = vs->Dictionary; + UInt32 dictionarySize = vs->Properties.DictionarySize; + UInt32 dictionaryPos = vs->DictionaryPos; + + Byte tempDictionary[4]; + + #ifndef _LZMA_IN_CB + *inSizeProcessed = 0; + #endif + *outSizeProcessed = 0; + if (len == kLzmaStreamWasFinishedId) + return LZMA_RESULT_OK; + + if (dictionarySize == 0) + { + dictionary = tempDictionary; + dictionarySize = 1; + tempDictionary[0] = vs->TempDictionary[0]; + } + + if (len == kLzmaNeedInitId) + { + { + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); + UInt32 i; + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + rep0 = rep1 = rep2 = rep3 = 1; + state = 0; + globalPos = 0; + distanceLimit = 0; + dictionaryPos = 0; + dictionary[dictionarySize - 1] = 0; + #ifdef _LZMA_IN_CB + RC_INIT; + #else + RC_INIT(inStream, inSize); + #endif + } + len = 0; + } + while(len != 0 && nowPos < outSize) + { + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + len--; + } + if (dictionaryPos == 0) + previousByte = dictionary[dictionarySize - 1]; + else + previousByte = dictionary[dictionaryPos - 1]; + + #else /* if !_LZMA_OUT_READ */ + + int state = 0; + UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; + int len = 0; + const Byte *Buffer; + const Byte *BufferLim; + UInt32 Range; + UInt32 Code; + + #ifndef _LZMA_IN_CB + *inSizeProcessed = 0; + #endif + *outSizeProcessed = 0; + + { + UInt32 i; + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + } + + #ifdef _LZMA_IN_CB + RC_INIT; + #else + RC_INIT(inStream, inSize); + #endif + + #endif /* _LZMA_OUT_READ */ + + while(nowPos < outSize) + { + CProb *prob; + UInt32 bound; + int posState = (int)( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + & posStateMask); + + prob = p + IsMatch + (state << kNumPosBitsMax) + posState; + IfBit0(prob) + { + int symbol = 1; + UpdateBit0(prob) + prob = p + Literal + (LZMA_LIT_SIZE * + ((( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + & literalPosMask) << lc) + (previousByte >> (8 - lc)))); + + if (state >= kNumLitStates) + { + int matchByte; + #ifdef _LZMA_OUT_READ + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + matchByte = dictionary[pos]; + #else + matchByte = outStream[nowPos - rep0]; + #endif + do + { + int bit; + CProb *probLit; + matchByte <<= 1; + bit = (matchByte & 0x100); + probLit = prob + 0x100 + bit + symbol; + RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) + } + while (symbol < 0x100); + } + while (symbol < 0x100) + { + CProb *probLit = prob + symbol; + RC_GET_BIT(probLit, symbol) + } + previousByte = (Byte)symbol; + + outStream[nowPos++] = previousByte; + #ifdef _LZMA_OUT_READ + if (distanceLimit < dictionarySize) + distanceLimit++; + + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #endif + if (state < 4) state = 0; + else if (state < 10) state -= 3; + else state -= 6; + } + else + { + UpdateBit1(prob); + prob = p + IsRep + state; + IfBit0(prob) + { + UpdateBit0(prob); + rep3 = rep2; + rep2 = rep1; + rep1 = rep0; + state = state < kNumLitStates ? 0 : 3; + prob = p + LenCoder; + } + else + { + UpdateBit1(prob); + prob = p + IsRepG0 + state; + IfBit0(prob) + { + UpdateBit0(prob); + prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; + IfBit0(prob) + { + #ifdef _LZMA_OUT_READ + UInt32 pos; + #endif + UpdateBit0(prob); + + #ifdef _LZMA_OUT_READ + if (distanceLimit == 0) + #else + if (nowPos == 0) + #endif + return LZMA_RESULT_DATA_ERROR; + + state = state < kNumLitStates ? 9 : 11; + #ifdef _LZMA_OUT_READ + pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + previousByte = dictionary[pos]; + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #else + previousByte = outStream[nowPos - rep0]; + #endif + outStream[nowPos++] = previousByte; + #ifdef _LZMA_OUT_READ + if (distanceLimit < dictionarySize) + distanceLimit++; + #endif + + continue; + } + else + { + UpdateBit1(prob); + } + } + else + { + UInt32 distance; + UpdateBit1(prob); + prob = p + IsRepG1 + state; + IfBit0(prob) + { + UpdateBit0(prob); + distance = rep1; + } + else + { + UpdateBit1(prob); + prob = p + IsRepG2 + state; + IfBit0(prob) + { + UpdateBit0(prob); + distance = rep2; + } + else + { + UpdateBit1(prob); + distance = rep3; + rep3 = rep2; + } + rep2 = rep1; + } + rep1 = rep0; + rep0 = distance; + } + state = state < kNumLitStates ? 8 : 11; + prob = p + RepLenCoder; + } + { + int numBits, offset; + CProb *probLen = prob + LenChoice; + IfBit0(probLen) + { + UpdateBit0(probLen); + probLen = prob + LenLow + (posState << kLenNumLowBits); + offset = 0; + numBits = kLenNumLowBits; + } + else + { + UpdateBit1(probLen); + probLen = prob + LenChoice2; + IfBit0(probLen) + { + UpdateBit0(probLen); + probLen = prob + LenMid + (posState << kLenNumMidBits); + offset = kLenNumLowSymbols; + numBits = kLenNumMidBits; + } + else + { + UpdateBit1(probLen); + probLen = prob + LenHigh; + offset = kLenNumLowSymbols + kLenNumMidSymbols; + numBits = kLenNumHighBits; + } + } + RangeDecoderBitTreeDecode(probLen, numBits, len); + len += offset; + } + + if (state < 4) + { + int posSlot; + state += kNumLitStates; + prob = p + PosSlot + + ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << + kNumPosSlotBits); + RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); + if (posSlot >= kStartPosModelIndex) + { + int numDirectBits = ((posSlot >> 1) - 1); + rep0 = (2 | ((UInt32)posSlot & 1)); + if (posSlot < kEndPosModelIndex) + { + rep0 <<= numDirectBits; + prob = p + SpecPos + rep0 - posSlot - 1; + } + else + { + numDirectBits -= kNumAlignBits; + do + { + RC_NORMALIZE + Range >>= 1; + rep0 <<= 1; + if (Code >= Range) + { + Code -= Range; + rep0 |= 1; + } + } + while (--numDirectBits != 0); + prob = p + Align; + rep0 <<= kNumAlignBits; + numDirectBits = kNumAlignBits; + } + { + int i = 1; + int mi = 1; + do + { + CProb *prob3 = prob + mi; + RC_GET_BIT2(prob3, mi, ; , rep0 |= i); + i <<= 1; + } + while(--numDirectBits != 0); + } + } + else + rep0 = posSlot; + if (++rep0 == (UInt32)(0)) + { + /* it's for stream version */ + len = kLzmaStreamWasFinishedId; + break; + } + } + + len += kMatchMinLen; + #ifdef _LZMA_OUT_READ + if (rep0 > distanceLimit) + #else + if (rep0 > nowPos) + #endif + return LZMA_RESULT_DATA_ERROR; + + #ifdef _LZMA_OUT_READ + if (dictionarySize - distanceLimit > (UInt32)len) + distanceLimit += len; + else + distanceLimit = dictionarySize; + #endif + + do + { + #ifdef _LZMA_OUT_READ + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + previousByte = dictionary[pos]; + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #else + previousByte = outStream[nowPos - rep0]; + #endif + len--; + outStream[nowPos++] = previousByte; + } + while(len != 0 && nowPos < outSize); + } + } + RC_NORMALIZE; + + #ifdef _LZMA_OUT_READ + vs->Range = Range; + vs->Code = Code; + vs->DictionaryPos = dictionaryPos; + vs->GlobalPos = globalPos + (UInt32)nowPos; + vs->DistanceLimit = distanceLimit; + vs->Reps[0] = rep0; + vs->Reps[1] = rep1; + vs->Reps[2] = rep2; + vs->Reps[3] = rep3; + vs->State = state; + vs->RemainLen = len; + vs->TempDictionary[0] = tempDictionary[0]; + #endif + + #ifdef _LZMA_IN_CB + vs->Buffer = Buffer; + vs->BufferLim = BufferLim; + #else + *inSizeProcessed = (SizeT)(Buffer - inStream); + #endif + *outSizeProcessed = nowPos; + return LZMA_RESULT_OK; +} diff --git a/target/linux/ath79/image/lzma-loader/src/LzmaDecode.h b/target/linux/ath79/image/lzma-loader/src/LzmaDecode.h new file mode 100644 index 0000000000..2870eeb9c9 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/LzmaDecode.h @@ -0,0 +1,113 @@ +/* + LzmaDecode.h + LZMA Decoder interface + + LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this code, expressly permits you to + statically or dynamically link your code (or bind by name) to the + interfaces of this file without subjecting your linked code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#ifndef __LZMADECODE_H +#define __LZMADECODE_H + +#include "LzmaTypes.h" + +/* #define _LZMA_IN_CB */ +/* Use callback for input data */ + +/* #define _LZMA_OUT_READ */ +/* Use read function for output data */ + +/* #define _LZMA_PROB32 */ +/* It can increase speed on some 32-bit CPUs, + but memory usage will be doubled in that case */ + +/* #define _LZMA_LOC_OPT */ +/* Enable local speed optimizations inside code */ + +#ifdef _LZMA_PROB32 +#define CProb UInt32 +#else +#define CProb UInt16 +#endif + +#define LZMA_RESULT_OK 0 +#define LZMA_RESULT_DATA_ERROR 1 + +#ifdef _LZMA_IN_CB +typedef struct _ILzmaInCallback +{ + int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize); +} ILzmaInCallback; +#endif + +#define LZMA_BASE_SIZE 1846 +#define LZMA_LIT_SIZE 768 + +#define LZMA_PROPERTIES_SIZE 5 + +typedef struct _CLzmaProperties +{ + int lc; + int lp; + int pb; + #ifdef _LZMA_OUT_READ + UInt32 DictionarySize; + #endif +}CLzmaProperties; + +int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); + +#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) + +#define kLzmaNeedInitId (-2) + +typedef struct _CLzmaDecoderState +{ + CLzmaProperties Properties; + CProb *Probs; + + #ifdef _LZMA_IN_CB + const unsigned char *Buffer; + const unsigned char *BufferLim; + #endif + + #ifdef _LZMA_OUT_READ + unsigned char *Dictionary; + UInt32 Range; + UInt32 Code; + UInt32 DictionaryPos; + UInt32 GlobalPos; + UInt32 DistanceLimit; + UInt32 Reps[4]; + int State; + int RemainLen; + unsigned char TempDictionary[4]; + #endif +} CLzmaDecoderState; + +#ifdef _LZMA_OUT_READ +#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; } +#endif + +int LzmaDecode(CLzmaDecoderState *vs, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback, + #else + const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, + #endif + unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); + +#endif diff --git a/target/linux/ath79/image/lzma-loader/src/LzmaTypes.h b/target/linux/ath79/image/lzma-loader/src/LzmaTypes.h new file mode 100644 index 0000000000..9c27290757 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/LzmaTypes.h @@ -0,0 +1,45 @@ +/* +LzmaTypes.h + +Types for LZMA Decoder + +This file written and distributed to public domain by Igor Pavlov. +This file is part of LZMA SDK 4.40 (2006-05-01) +*/ + +#ifndef __LZMATYPES_H +#define __LZMATYPES_H + +#ifndef _7ZIP_BYTE_DEFINED +#define _7ZIP_BYTE_DEFINED +typedef unsigned char Byte; +#endif + +#ifndef _7ZIP_UINT16_DEFINED +#define _7ZIP_UINT16_DEFINED +typedef unsigned short UInt16; +#endif + +#ifndef _7ZIP_UINT32_DEFINED +#define _7ZIP_UINT32_DEFINED +#ifdef _LZMA_UINT32_IS_ULONG +typedef unsigned long UInt32; +#else +typedef unsigned int UInt32; +#endif +#endif + +/* #define _LZMA_NO_SYSTEM_SIZE_T */ +/* You can use it, if you don't want <stddef.h> */ + +#ifndef _7ZIP_SIZET_DEFINED +#define _7ZIP_SIZET_DEFINED +#ifdef _LZMA_NO_SYSTEM_SIZE_T +typedef UInt32 SizeT; +#else +#include <stddef.h> +typedef size_t SizeT; +#endif +#endif + +#endif diff --git a/target/linux/ath79/image/lzma-loader/src/Makefile b/target/linux/ath79/image/lzma-loader/src/Makefile new file mode 100644 index 0000000000..5f10bdb8f1 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/Makefile @@ -0,0 +1,106 @@ +# +# Makefile for the LZMA compressed kernel loader for +# Atheros AR7XXX/AR9XXX based boards +# +# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> +# +# Some parts of this file was based on the OpenWrt specific lzma-loader +# for the BCM47xx and ADM5120 based boards: +# Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) +# Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com> +# Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. +# + +LOADADDR := +LZMA_TEXT_START := 0x80a00000 +LOADER_DATA := +BOARD := +FLASH_OFFS := +FLASH_MAX := + +CC := $(CROSS_COMPILE)gcc +LD := $(CROSS_COMPILE)ld +OBJCOPY := $(CROSS_COMPILE)objcopy +OBJDUMP := $(CROSS_COMPILE)objdump + +BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug \ + -R .MIPS.abiflags -S + +CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ + -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \ + -mno-abicalls -fno-pic -ffunction-sections -pipe -mlong-calls \ + -fno-common -ffreestanding -fhonour-copts \ + -mabi=32 -march=mips32r2 \ + -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap +CFLAGS += -D_LZMA_PROB32 + +ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +LDFLAGS = -static --gc-sections -no-warn-mismatch +LDFLAGS += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START) + +O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32) + +OBJECTS := head.o loader.o cache.o board.o printf.o LzmaDecode.o + +ifneq ($(strip $(LOADER_DATA)),) +OBJECTS += data.o +CFLAGS += -DLZMA_WRAPPER=1 -DLOADADDR=$(LOADADDR) +endif + +ifneq ($(strip $(KERNEL_CMDLINE)),) +CFLAGS += -DCONFIG_KERNEL_CMDLINE='"$(KERNEL_CMDLINE)"' +endif + +ifneq ($(strip $(FLASH_OFFS)),) +CFLAGS += -DCONFIG_FLASH_OFFS=$(FLASH_OFFS) +endif + +ifneq ($(strip $(FLASH_MAX)),) +CFLAGS += -DCONFIG_FLASH_MAX=$(FLASH_MAX) +endif + +BOARD_DEF := $(shell echo $(strip $(BOARD)) | tr a-z A-Z | tr - _) +ifneq ($(BOARD_DEF),) +CFLAGS += -DCONFIG_BOARD_$(BOARD_DEF) +endif + +all: loader.elf + +# Don't build dependencies, this may die if $(CC) isn't gcc +dep: + +install: + +%.o : %.c + $(CC) $(CFLAGS) -c -o $@ $< + +%.o : %.S + $(CC) $(ASFLAGS) -c -o $@ $< + +data.o: $(LOADER_DATA) + $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $< + +loader: $(OBJECTS) + $(LD) $(LDFLAGS) -o $@ $(OBJECTS) + +loader.bin: loader + $(OBJCOPY) $(BIN_FLAGS) $< $@ + +loader2.o: loader.bin + $(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $< + +loader.elf: loader2.o + $(LD) -e startup -T loader2.lds -Ttext $(LOADADDR) -o $@ $< + +mrproper: clean + +clean: + rm -f loader *.elf *.bin *.o + + + diff --git a/target/linux/ath79/image/lzma-loader/src/ar71xx_regs.h b/target/linux/ath79/image/lzma-loader/src/ar71xx_regs.h new file mode 100644 index 0000000000..19a4785bb4 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/ar71xx_regs.h @@ -0,0 +1,725 @@ +/* + * Atheros AR71XX/AR724X/AR913X SoC register definitions + * + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_AR71XX_REGS_H +#define __ASM_MACH_AR71XX_REGS_H + +#define BIT(_x) (1UL << (_x)) + +#define AR71XX_APB_BASE 0x18000000 +#define AR71XX_GE0_BASE 0x19000000 +#define AR71XX_GE0_SIZE 0x10000 +#define AR71XX_GE1_BASE 0x1a000000 +#define AR71XX_GE1_SIZE 0x10000 +#define AR71XX_EHCI_BASE 0x1b000000 +#define AR71XX_EHCI_SIZE 0x1000 +#define AR71XX_OHCI_BASE 0x1c000000 +#define AR71XX_OHCI_SIZE 0x1000 +#define AR71XX_SPI_BASE 0x1f000000 +#define AR71XX_SPI_SIZE 0x01000000 + +#define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000) +#define AR71XX_DDR_CTRL_SIZE 0x100 +#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) +#define AR71XX_UART_SIZE 0x100 +#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) +#define AR71XX_USB_CTRL_SIZE 0x100 +#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) +#define AR71XX_GPIO_SIZE 0x100 +#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) +#define AR71XX_PLL_SIZE 0x100 +#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) +#define AR71XX_RESET_SIZE 0x100 +#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) +#define AR71XX_MII_SIZE 0x100 + +#define AR71XX_PCI_MEM_BASE 0x10000000 +#define AR71XX_PCI_MEM_SIZE 0x07000000 + +#define AR71XX_PCI_WIN0_OFFS 0x10000000 +#define AR71XX_PCI_WIN1_OFFS 0x11000000 +#define AR71XX_PCI_WIN2_OFFS 0x12000000 +#define AR71XX_PCI_WIN3_OFFS 0x13000000 +#define AR71XX_PCI_WIN4_OFFS 0x14000000 +#define AR71XX_PCI_WIN5_OFFS 0x15000000 +#define AR71XX_PCI_WIN6_OFFS 0x16000000 +#define AR71XX_PCI_WIN7_OFFS 0x07000000 + +#define AR71XX_PCI_CFG_BASE \ + (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000) +#define AR71XX_PCI_CFG_SIZE 0x100 + +#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) +#define AR7240_USB_CTRL_SIZE 0x100 +#define AR7240_OHCI_BASE 0x1b000000 +#define AR7240_OHCI_SIZE 0x1000 + +#define AR724X_PCI_MEM_BASE 0x10000000 +#define AR724X_PCI_MEM_SIZE 0x04000000 + +#define AR724X_PCI_CFG_BASE 0x14000000 +#define AR724X_PCI_CFG_SIZE 0x1000 +#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000c0000) +#define AR724X_PCI_CRP_SIZE 0x1000 +#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000) +#define AR724X_PCI_CTRL_SIZE 0x100 + +#define AR724X_EHCI_BASE 0x1b000000 +#define AR724X_EHCI_SIZE 0x1000 + +#define AR913X_EHCI_BASE 0x1b000000 +#define AR913X_EHCI_SIZE 0x1000 +#define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) +#define AR913X_WMAC_SIZE 0x30000 + +#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) +#define AR933X_UART_SIZE 0x14 +#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) +#define AR933X_GMAC_SIZE 0x04 +#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) +#define AR933X_WMAC_SIZE 0x20000 +#define AR933X_EHCI_BASE 0x1b000000 +#define AR933X_EHCI_SIZE 0x1000 + +#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) +#define AR934X_GMAC_SIZE 0x14 +#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) +#define AR934X_WMAC_SIZE 0x20000 +#define AR934X_EHCI_BASE 0x1b000000 +#define AR934X_EHCI_SIZE 0x200 + +#define QCA955X_PCI_MEM_BASE0 0x10000000 +#define QCA955X_PCI_MEM_BASE1 0x12000000 +#define QCA955X_PCI_MEM_SIZE 0x02000000 +#define QCA955X_PCI_CFG_BASE0 0x14000000 +#define QCA955X_PCI_CFG_BASE1 0x16000000 +#define QCA955X_PCI_CFG_SIZE 0x1000 +#define QCA955X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000) +#define QCA955X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000) +#define QCA955X_PCI_CRP_SIZE 0x1000 +#define QCA955X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000) +#define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) +#define QCA955X_PCI_CTRL_SIZE 0x100 + +#define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) +#define QCA955X_WMAC_SIZE 0x20000 +#define QCA955X_EHCI0_BASE 0x1b000000 +#define QCA955X_EHCI1_BASE 0x1b400000 +#define QCA955X_EHCI_SIZE 0x1000 +#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) +#define QCA955X_GMAC_SIZE 0x40 + +#define AR9300_OTP_BASE 0x14000 +#define AR9300_OTP_STATUS 0x15f18 +#define AR9300_OTP_STATUS_TYPE 0x7 +#define AR9300_OTP_STATUS_VALID 0x4 +#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 +#define AR9300_OTP_STATUS_SM_BUSY 0x1 +#define AR9300_OTP_READ_DATA 0x15f1c + +/* + * DDR_CTRL block + */ +#define AR71XX_DDR_REG_PCI_WIN0 0x7c +#define AR71XX_DDR_REG_PCI_WIN1 0x80 +#define AR71XX_DDR_REG_PCI_WIN2 0x84 +#define AR71XX_DDR_REG_PCI_WIN3 0x88 +#define AR71XX_DDR_REG_PCI_WIN4 0x8c +#define AR71XX_DDR_REG_PCI_WIN5 0x90 +#define AR71XX_DDR_REG_PCI_WIN6 0x94 +#define AR71XX_DDR_REG_PCI_WIN7 0x98 +#define AR71XX_DDR_REG_FLUSH_GE0 0x9c +#define AR71XX_DDR_REG_FLUSH_GE1 0xa0 +#define AR71XX_DDR_REG_FLUSH_USB 0xa4 +#define AR71XX_DDR_REG_FLUSH_PCI 0xa8 + +#define AR724X_DDR_REG_FLUSH_GE0 0x7c +#define AR724X_DDR_REG_FLUSH_GE1 0x80 +#define AR724X_DDR_REG_FLUSH_USB 0x84 +#define AR724X_DDR_REG_FLUSH_PCIE 0x88 + +#define AR913X_DDR_REG_FLUSH_GE0 0x7c +#define AR913X_DDR_REG_FLUSH_GE1 0x80 +#define AR913X_DDR_REG_FLUSH_USB 0x84 +#define AR913X_DDR_REG_FLUSH_WMAC 0x88 + +#define AR933X_DDR_REG_FLUSH_GE0 0x7c +#define AR933X_DDR_REG_FLUSH_GE1 0x80 +#define AR933X_DDR_REG_FLUSH_USB 0x84 +#define AR933X_DDR_REG_FLUSH_WMAC 0x88 + +#define AR934X_DDR_REG_FLUSH_GE0 0x9c +#define AR934X_DDR_REG_FLUSH_GE1 0xa0 +#define AR934X_DDR_REG_FLUSH_USB 0xa4 +#define AR934X_DDR_REG_FLUSH_PCIE 0xa8 +#define AR934X_DDR_REG_FLUSH_WMAC 0xac + +/* + * PLL block + */ +#define AR71XX_PLL_REG_CPU_CONFIG 0x00 +#define AR71XX_PLL_REG_SEC_CONFIG 0x04 +#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10 +#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14 + +#define AR71XX_PLL_DIV_SHIFT 3 +#define AR71XX_PLL_DIV_MASK 0x1f +#define AR71XX_CPU_DIV_SHIFT 16 +#define AR71XX_CPU_DIV_MASK 0x3 +#define AR71XX_DDR_DIV_SHIFT 18 +#define AR71XX_DDR_DIV_MASK 0x3 +#define AR71XX_AHB_DIV_SHIFT 20 +#define AR71XX_AHB_DIV_MASK 0x7 + +#define AR71XX_ETH0_PLL_SHIFT 17 +#define AR71XX_ETH1_PLL_SHIFT 19 + +#define AR724X_PLL_REG_CPU_CONFIG 0x00 +#define AR724X_PLL_REG_PCIE_CONFIG 0x18 + +#define AR724X_PLL_DIV_SHIFT 0 +#define AR724X_PLL_DIV_MASK 0x3ff +#define AR724X_PLL_REF_DIV_SHIFT 10 +#define AR724X_PLL_REF_DIV_MASK 0xf +#define AR724X_AHB_DIV_SHIFT 19 +#define AR724X_AHB_DIV_MASK 0x1 +#define AR724X_DDR_DIV_SHIFT 22 +#define AR724X_DDR_DIV_MASK 0x3 + +#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c + +#define AR913X_PLL_REG_CPU_CONFIG 0x00 +#define AR913X_PLL_REG_ETH_CONFIG 0x04 +#define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14 +#define AR913X_PLL_REG_ETH1_INT_CLOCK 0x18 + +#define AR913X_PLL_DIV_SHIFT 0 +#define AR913X_PLL_DIV_MASK 0x3ff +#define AR913X_DDR_DIV_SHIFT 22 +#define AR913X_DDR_DIV_MASK 0x3 +#define AR913X_AHB_DIV_SHIFT 19 +#define AR913X_AHB_DIV_MASK 0x1 + +#define AR913X_ETH0_PLL_SHIFT 20 +#define AR913X_ETH1_PLL_SHIFT 22 + +#define AR933X_PLL_CPU_CONFIG_REG 0x00 +#define AR933X_PLL_CLOCK_CTRL_REG 0x08 + +#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10 +#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f +#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16 +#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f +#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23 +#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 + +#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2) +#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5 +#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3 +#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10 +#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3 +#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15 +#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7 + +#define AR934X_PLL_CPU_CONFIG_REG 0x00 +#define AR934X_PLL_DDR_CONFIG_REG 0x04 +#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08 +#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c + +#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 +#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f +#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT 6 +#define AR934X_PLL_CPU_CONFIG_NINT_MASK 0x3f +#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 +#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f +#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 +#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 + +#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 +#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff +#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT 10 +#define AR934X_PLL_DDR_CONFIG_NINT_MASK 0x3f +#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 +#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f +#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 +#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 + +#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2) +#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3) +#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4) +#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT 5 +#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x1f +#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT 10 +#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x1f +#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT 15 +#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x1f +#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) +#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) +#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) + +#define QCA955X_PLL_CPU_CONFIG_REG 0x00 +#define QCA955X_PLL_DDR_CONFIG_REG 0x04 +#define QCA955X_PLL_CLK_CTRL_REG 0x08 + +#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 +#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f +#define QCA955X_PLL_CPU_CONFIG_NINT_SHIFT 6 +#define QCA955X_PLL_CPU_CONFIG_NINT_MASK 0x3f +#define QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 +#define QCA955X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f +#define QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 +#define QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 + +#define QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 +#define QCA955X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff +#define QCA955X_PLL_DDR_CONFIG_NINT_SHIFT 10 +#define QCA955X_PLL_DDR_CONFIG_NINT_MASK 0x3f +#define QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 +#define QCA955X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f +#define QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 +#define QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 + +#define QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) +#define QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) +#define QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) +#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 +#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f +#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 +#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f +#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 +#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f +#define QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) +#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) +#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) + +/* + * USB_CONFIG block + */ +#define AR71XX_USB_CTRL_REG_FLADJ 0x00 +#define AR71XX_USB_CTRL_REG_CONFIG 0x04 + +/* + * RESET block + */ +#define AR71XX_RESET_REG_TIMER 0x00 +#define AR71XX_RESET_REG_TIMER_RELOAD 0x04 +#define AR71XX_RESET_REG_WDOG_CTRL 0x08 +#define AR71XX_RESET_REG_WDOG 0x0c +#define AR71XX_RESET_REG_MISC_INT_STATUS 0x10 +#define AR71XX_RESET_REG_MISC_INT_ENABLE 0x14 +#define AR71XX_RESET_REG_PCI_INT_STATUS 0x18 +#define AR71XX_RESET_REG_PCI_INT_ENABLE 0x1c +#define AR71XX_RESET_REG_GLOBAL_INT_STATUS 0x20 +#define AR71XX_RESET_REG_RESET_MODULE 0x24 +#define AR71XX_RESET_REG_PERFC_CTRL 0x2c +#define AR71XX_RESET_REG_PERFC0 0x30 +#define AR71XX_RESET_REG_PERFC1 0x34 +#define AR71XX_RESET_REG_REV_ID 0x90 + +#define AR913X_RESET_REG_GLOBAL_INT_STATUS 0x18 +#define AR913X_RESET_REG_RESET_MODULE 0x1c +#define AR913X_RESET_REG_PERF_CTRL 0x20 +#define AR913X_RESET_REG_PERFC0 0x24 +#define AR913X_RESET_REG_PERFC1 0x28 + +#define AR724X_RESET_REG_RESET_MODULE 0x1c + +#define AR933X_RESET_REG_RESET_MODULE 0x1c +#define AR933X_RESET_REG_BOOTSTRAP 0xac + +#define AR934X_RESET_REG_RESET_MODULE 0x1c +#define AR934X_RESET_REG_BOOTSTRAP 0xb0 +#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac + +#define QCA955X_RESET_REG_BOOTSTRAP 0xb0 +#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac + +#define MISC_INT_ETHSW BIT(12) +#define MISC_INT_TIMER4 BIT(10) +#define MISC_INT_TIMER3 BIT(9) +#define MISC_INT_TIMER2 BIT(8) +#define MISC_INT_DMA BIT(7) +#define MISC_INT_OHCI BIT(6) +#define MISC_INT_PERFC BIT(5) +#define MISC_INT_WDOG BIT(4) +#define MISC_INT_UART BIT(3) +#define MISC_INT_GPIO BIT(2) +#define MISC_INT_ERROR BIT(1) +#define MISC_INT_TIMER BIT(0) + +#define AR71XX_RESET_EXTERNAL BIT(28) +#define AR71XX_RESET_FULL_CHIP BIT(24) +#define AR71XX_RESET_CPU_NMI BIT(21) +#define AR71XX_RESET_CPU_COLD BIT(20) +#define AR71XX_RESET_DMA BIT(19) +#define AR71XX_RESET_SLIC BIT(18) +#define AR71XX_RESET_STEREO BIT(17) +#define AR71XX_RESET_DDR BIT(16) +#define AR71XX_RESET_GE1_MAC BIT(13) +#define AR71XX_RESET_GE1_PHY BIT(12) +#define AR71XX_RESET_USBSUS_OVERRIDE BIT(10) +#define AR71XX_RESET_GE0_MAC BIT(9) +#define AR71XX_RESET_GE0_PHY BIT(8) +#define AR71XX_RESET_USB_OHCI_DLL BIT(6) +#define AR71XX_RESET_USB_HOST BIT(5) +#define AR71XX_RESET_USB_PHY BIT(4) +#define AR71XX_RESET_PCI_BUS BIT(1) +#define AR71XX_RESET_PCI_CORE BIT(0) + +#define AR7240_RESET_USB_HOST BIT(5) +#define AR7240_RESET_OHCI_DLL BIT(3) + +#define AR724X_RESET_GE1_MDIO BIT(23) +#define AR724X_RESET_GE0_MDIO BIT(22) +#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10) +#define AR724X_RESET_PCIE_PHY BIT(7) +#define AR724X_RESET_PCIE BIT(6) +#define AR724X_RESET_USB_HOST BIT(5) +#define AR724X_RESET_USB_PHY BIT(4) +#define AR724X_RESET_USBSUS_OVERRIDE BIT(3) + +#define AR913X_RESET_AMBA2WMAC BIT(22) +#define AR913X_RESET_USBSUS_OVERRIDE BIT(10) +#define AR913X_RESET_USB_HOST BIT(5) +#define AR913X_RESET_USB_PHY BIT(4) + +#define AR933X_RESET_GE1_MDIO BIT(23) +#define AR933X_RESET_GE0_MDIO BIT(22) +#define AR933X_RESET_GE1_MAC BIT(13) +#define AR933X_RESET_WMAC BIT(11) +#define AR933X_RESET_GE0_MAC BIT(9) +#define AR933X_RESET_USB_HOST BIT(5) +#define AR933X_RESET_USB_PHY BIT(4) +#define AR933X_RESET_USBSUS_OVERRIDE BIT(3) + +#define AR934X_RESET_HOST BIT(31) +#define AR934X_RESET_SLIC BIT(30) +#define AR934X_RESET_HDMA BIT(29) +#define AR934X_RESET_EXTERNAL BIT(28) +#define AR934X_RESET_RTC BIT(27) +#define AR934X_RESET_PCIE_EP_INT BIT(26) +#define AR934X_RESET_CHKSUM_ACC BIT(25) +#define AR934X_RESET_FULL_CHIP BIT(24) +#define AR934X_RESET_GE1_MDIO BIT(23) +#define AR934X_RESET_GE0_MDIO BIT(22) +#define AR934X_RESET_CPU_NMI BIT(21) +#define AR934X_RESET_CPU_COLD BIT(20) +#define AR934X_RESET_HOST_RESET_INT BIT(19) +#define AR934X_RESET_PCIE_EP BIT(18) +#define AR934X_RESET_UART1 BIT(17) +#define AR934X_RESET_DDR BIT(16) +#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) +#define AR934X_RESET_NANDF BIT(14) +#define AR934X_RESET_GE1_MAC BIT(13) +#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) +#define AR934X_RESET_USB_PHY_ANALOG BIT(11) +#define AR934X_RESET_HOST_DMA_INT BIT(10) +#define AR934X_RESET_GE0_MAC BIT(9) +#define AR934X_RESET_ETH_SWITCH BIT(8) +#define AR934X_RESET_PCIE_PHY BIT(7) +#define AR934X_RESET_PCIE BIT(6) +#define AR934X_RESET_USB_HOST BIT(5) +#define AR934X_RESET_USB_PHY BIT(4) +#define AR934X_RESET_USBSUS_OVERRIDE BIT(3) +#define AR934X_RESET_LUT BIT(2) +#define AR934X_RESET_MBOX BIT(1) +#define AR934X_RESET_I2S BIT(0) + +#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) +#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) +#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) + +#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) +#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22) +#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21) +#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20) +#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19) +#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18) +#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17) +#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16) +#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7) +#define AR934X_BOOTSTRAP_PCIE_RC BIT(6) +#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5) +#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4) +#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2) +#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) +#define AR934X_BOOTSTRAP_DDR1 BIT(0) + +#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) + +#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) +#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) +#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) +#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3) +#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4) +#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5) +#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6) +#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7) +#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8) +#define AR934X_PCIE_WMAC_INT_WMAC_ALL \ + (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \ + AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP) + +#define AR934X_PCIE_WMAC_INT_PCIE_ALL \ + (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \ + AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \ + AR934X_PCIE_WMAC_INT_PCIE_RC3) + +#define QCA955X_EXT_INT_WMAC_MISC BIT(0) +#define QCA955X_EXT_INT_WMAC_TX BIT(1) +#define QCA955X_EXT_INT_WMAC_RXLP BIT(2) +#define QCA955X_EXT_INT_WMAC_RXHP BIT(3) +#define QCA955X_EXT_INT_PCIE_RC1 BIT(4) +#define QCA955X_EXT_INT_PCIE_RC1_INT0 BIT(5) +#define QCA955X_EXT_INT_PCIE_RC1_INT1 BIT(6) +#define QCA955X_EXT_INT_PCIE_RC1_INT2 BIT(7) +#define QCA955X_EXT_INT_PCIE_RC1_INT3 BIT(8) +#define QCA955X_EXT_INT_PCIE_RC2 BIT(12) +#define QCA955X_EXT_INT_PCIE_RC2_INT0 BIT(13) +#define QCA955X_EXT_INT_PCIE_RC2_INT1 BIT(14) +#define QCA955X_EXT_INT_PCIE_RC2_INT2 BIT(15) +#define QCA955X_EXT_INT_PCIE_RC2_INT3 BIT(16) +#define QCA955X_EXT_INT_USB1 BIT(24) +#define QCA955X_EXT_INT_USB2 BIT(28) + +#define QCA955X_EXT_INT_WMAC_ALL \ + (QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \ + QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP) + +#define QCA955X_EXT_INT_PCIE_RC1_ALL \ + (QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \ + QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \ + QCA955X_EXT_INT_PCIE_RC1_INT3) + +#define QCA955X_EXT_INT_PCIE_RC2_ALL \ + (QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \ + QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \ + QCA955X_EXT_INT_PCIE_RC2_INT3) + +#define REV_ID_MAJOR_MASK 0xfff0 +#define REV_ID_MAJOR_AR71XX 0x00a0 +#define REV_ID_MAJOR_AR913X 0x00b0 +#define REV_ID_MAJOR_AR7240 0x00c0 +#define REV_ID_MAJOR_AR7241 0x0100 +#define REV_ID_MAJOR_AR7242 0x1100 +#define REV_ID_MAJOR_AR9330 0x0110 +#define REV_ID_MAJOR_AR9331 0x1110 +#define REV_ID_MAJOR_AR9341 0x0120 +#define REV_ID_MAJOR_AR9342 0x1120 +#define REV_ID_MAJOR_AR9344 0x2120 +#define REV_ID_MAJOR_QCA9558 0x1130 + +#define AR71XX_REV_ID_MINOR_MASK 0x3 +#define AR71XX_REV_ID_MINOR_AR7130 0x0 +#define AR71XX_REV_ID_MINOR_AR7141 0x1 +#define AR71XX_REV_ID_MINOR_AR7161 0x2 +#define AR71XX_REV_ID_REVISION_MASK 0x3 +#define AR71XX_REV_ID_REVISION_SHIFT 2 + +#define AR913X_REV_ID_MINOR_MASK 0x3 +#define AR913X_REV_ID_MINOR_AR9130 0x0 +#define AR913X_REV_ID_MINOR_AR9132 0x1 +#define AR913X_REV_ID_REVISION_MASK 0x3 +#define AR913X_REV_ID_REVISION_SHIFT 2 + +#define AR933X_REV_ID_REVISION_MASK 0x3 + +#define AR724X_REV_ID_REVISION_MASK 0x3 + +#define AR934X_REV_ID_REVISION_MASK 0xf + +#define AR944X_REV_ID_REVISION_MASK 0xf + +/* + * SPI block + */ +#define AR71XX_SPI_REG_FS 0x00 /* Function Select */ +#define AR71XX_SPI_REG_CTRL 0x04 /* SPI Control */ +#define AR71XX_SPI_REG_IOC 0x08 /* SPI I/O Control */ +#define AR71XX_SPI_REG_RDS 0x0c /* Read Data Shift */ + +#define AR71XX_SPI_FS_GPIO BIT(0) /* Enable GPIO mode */ + +#define AR71XX_SPI_CTRL_RD BIT(6) /* Remap Disable */ +#define AR71XX_SPI_CTRL_DIV_MASK 0x3f + +#define AR71XX_SPI_IOC_DO BIT(0) /* Data Out pin */ +#define AR71XX_SPI_IOC_CLK BIT(8) /* CLK pin */ +#define AR71XX_SPI_IOC_CS(n) BIT(16 + (n)) +#define AR71XX_SPI_IOC_CS0 AR71XX_SPI_IOC_CS(0) +#define AR71XX_SPI_IOC_CS1 AR71XX_SPI_IOC_CS(1) +#define AR71XX_SPI_IOC_CS2 AR71XX_SPI_IOC_CS(2) +#define AR71XX_SPI_IOC_CS_ALL (AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1 | \ + AR71XX_SPI_IOC_CS2) + +/* + * GPIO block + */ +#define AR71XX_GPIO_REG_OE 0x00 +#define AR71XX_GPIO_REG_IN 0x04 +#define AR71XX_GPIO_REG_OUT 0x08 +#define AR71XX_GPIO_REG_SET 0x0c +#define AR71XX_GPIO_REG_CLEAR 0x10 +#define AR71XX_GPIO_REG_INT_MODE 0x14 +#define AR71XX_GPIO_REG_INT_TYPE 0x18 +#define AR71XX_GPIO_REG_INT_POLARITY 0x1c +#define AR71XX_GPIO_REG_INT_PENDING 0x20 +#define AR71XX_GPIO_REG_INT_ENABLE 0x24 +#define AR71XX_GPIO_REG_FUNC 0x28 + +#define AR934X_GPIO_REG_OUT_FUNC0 0x2c +#define AR934X_GPIO_REG_OUT_FUNC1 0x30 +#define AR934X_GPIO_REG_OUT_FUNC2 0x34 +#define AR934X_GPIO_REG_OUT_FUNC3 0x38 +#define AR934X_GPIO_REG_OUT_FUNC4 0x3c +#define AR934X_GPIO_REG_OUT_FUNC5 0x40 +#define AR934X_GPIO_REG_FUNC 0x6c + +#define AR71XX_GPIO_COUNT 16 +#define AR724X_GPIO_COUNT 18 +#define AR913X_GPIO_COUNT 22 +#define AR933X_GPIO_COUNT 30 +#define AR934X_GPIO_COUNT 23 +#define QCA955X_GPIO_COUNT 24 + +#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) +#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) +#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) +#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) +#define AR71XX_GPIO_FUNC_UART_EN BIT(8) +#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) +#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) + +#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) +#define AR724X_GPIO_FUNC_SPI_EN BIT(18) +#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) +#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) +#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) +#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) +#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) +#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) +#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) +#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) +#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) +#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) +#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) +#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) +#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) +#define AR724X_GPIO_FUNC_UART_EN BIT(1) +#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) + +#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) +#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) +#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) +#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19) +#define AR913X_GPIO_FUNC_I2S1_EN BIT(18) +#define AR913X_GPIO_FUNC_I2S0_EN BIT(17) +#define AR913X_GPIO_FUNC_SLIC_EN BIT(16) +#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9) +#define AR913X_GPIO_FUNC_UART_EN BIT(8) +#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4) + +#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) +#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) +#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) +#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) +#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) +#define AR933X_GPIO_FUNC_SPI_EN BIT(18) +#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) +#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) +#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) +#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) +#define AR933X_GPIO_FUNC_UART_EN BIT(1) +#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) + +#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17) +#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14) +#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13) + +#define AR934X_GPIO_OUT_GPIO 0x00 + +/* + * MII_CTRL block + */ +#define AR71XX_MII_REG_MII0_CTRL 0x00 +#define AR71XX_MII_REG_MII1_CTRL 0x04 + +#define AR71XX_MII_CTRL_IF_MASK 3 +#define AR71XX_MII_CTRL_SPEED_SHIFT 4 +#define AR71XX_MII_CTRL_SPEED_MASK 3 +#define AR71XX_MII_CTRL_SPEED_10 0 +#define AR71XX_MII_CTRL_SPEED_100 1 +#define AR71XX_MII_CTRL_SPEED_1000 2 + +#define AR71XX_MII0_CTRL_IF_GMII 0 +#define AR71XX_MII0_CTRL_IF_MII 1 +#define AR71XX_MII0_CTRL_IF_RGMII 2 +#define AR71XX_MII0_CTRL_IF_RMII 3 + +#define AR71XX_MII1_CTRL_IF_RGMII 0 +#define AR71XX_MII1_CTRL_IF_RMII 1 + +/* + * AR933X GMAC interface + */ +#define AR933X_GMAC_REG_ETH_CFG 0x00 + +#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) +#define AR933X_ETH_CFG_MII_GE0 BIT(1) +#define AR933X_ETH_CFG_GMII_GE0 BIT(2) +#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) +#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) +#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) +#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) +#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) +#define AR933X_ETH_CFG_RMII_GE0 BIT(9) +#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 +#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) + +/* + * AR934X GMAC Interface + */ +#define AR934X_GMAC_REG_ETH_CFG 0x00 + +#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) +#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) +#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) +#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) +#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) +#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) +#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) +#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) +#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) +#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) +#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) +#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) +#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) + +/* + * QCA955X GMAC Interface + */ + +#define QCA955X_GMAC_REG_ETH_CFG 0x00 + +#define QCA955X_ETH_CFG_RGMII_GMAC0 BIT(0) +#define QCA955X_ETH_CFG_SGMII_GMAC0 BIT(6) + +#endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ath79/image/lzma-loader/src/board.c b/target/linux/ath79/image/lzma-loader/src/board.c new file mode 100644 index 0000000000..2f4dd6b1f6 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/board.c @@ -0,0 +1,56 @@ +/* + * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <stddef.h> +#include "config.h" +#include "ar71xx_regs.h" + +#define READREG(r) *(volatile unsigned int *)(r) +#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v + +#define KSEG1ADDR(_x) (((_x) & 0x1fffffff) | 0xa0000000) + +#define UART_BASE 0xb8020000 + +#define UART_TX 0 +#define UART_LSR 5 + +#define UART_LSR_THRE 0x20 + +#define UART_READ(r) READREG(UART_BASE + 4 * (r)) +#define UART_WRITE(r,v) WRITEREG(UART_BASE + 4 * (r), (v)) + +void board_putc(int ch) +{ + while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0); + UART_WRITE(UART_TX, ch); + while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0); +} + +#ifdef CONFIG_BOARD_TL_WR1043ND_V1 +static void tlwr1043nd_init(void) +{ + unsigned int reg = KSEG1ADDR(AR71XX_RESET_BASE); + unsigned int t; + + t = READREG(reg + AR913X_RESET_REG_RESET_MODULE); + t |= AR71XX_RESET_GE0_PHY; + WRITEREG(reg + AR913X_RESET_REG_RESET_MODULE, t); + /* flush write */ + t = READREG(reg + AR913X_RESET_REG_RESET_MODULE); +} +#else +static inline void tlwr1043nd_init(void) {} +#endif + +void board_init(void) +{ + tlwr1043nd_init(); +} diff --git a/target/linux/ath79/image/lzma-loader/src/cache.c b/target/linux/ath79/image/lzma-loader/src/cache.c new file mode 100644 index 0000000000..28cc848333 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/cache.c @@ -0,0 +1,43 @@ +/* + * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * The cache manipulation routine has been taken from the U-Boot project. + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "cache.h" +#include "cacheops.h" +#include "config.h" + +#define cache_op(op,addr) \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noreorder \n" \ + " .set mips3\n\t \n" \ + " cache %0, %1 \n" \ + " .set pop \n" \ + : \ + : "i" (op), "R" (*(unsigned char *)(addr))) + +void flush_cache(unsigned long start_addr, unsigned long size) +{ + unsigned long lsize = CONFIG_CACHELINE_SIZE; + unsigned long addr = start_addr & ~(lsize - 1); + unsigned long aend = (start_addr + size - 1) & ~(lsize - 1); + + while (1) { + cache_op(Hit_Writeback_Inv_D, addr); + cache_op(Hit_Invalidate_I, addr); + if (addr == aend) + break; + addr += lsize; + } +} diff --git a/target/linux/ath79/image/lzma-loader/src/cache.h b/target/linux/ath79/image/lzma-loader/src/cache.h new file mode 100644 index 0000000000..506a235884 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/cache.h @@ -0,0 +1,17 @@ +/* + * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef __CACHE_H +#define __CACHE_H + +void flush_cache(unsigned long start_addr, unsigned long size); + +#endif /* __CACHE_H */ diff --git a/target/linux/ath79/image/lzma-loader/src/cacheops.h b/target/linux/ath79/image/lzma-loader/src/cacheops.h new file mode 100644 index 0000000000..70bcad7694 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/cacheops.h @@ -0,0 +1,85 @@ +/* + * Cache operations for the cache instruction. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle + * (C) Copyright 1999 Silicon Graphics, Inc. + */ +#ifndef __ASM_CACHEOPS_H +#define __ASM_CACHEOPS_H + +/* + * Cache Operations available on all MIPS processors with R4000-style caches + */ +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 +#define Index_Load_Tag_I 0x04 +#define Index_Load_Tag_D 0x05 +#define Index_Store_Tag_I 0x08 +#define Index_Store_Tag_D 0x09 +#if defined(CONFIG_CPU_LOONGSON2) +#define Hit_Invalidate_I 0x00 +#else +#define Hit_Invalidate_I 0x10 +#endif +#define Hit_Invalidate_D 0x11 +#define Hit_Writeback_Inv_D 0x15 + +/* + * R4000-specific cacheops + */ +#define Create_Dirty_Excl_D 0x0d +#define Fill 0x14 +#define Hit_Writeback_I 0x18 +#define Hit_Writeback_D 0x19 + +/* + * R4000SC and R4400SC-specific cacheops + */ +#define Index_Invalidate_SI 0x02 +#define Index_Writeback_Inv_SD 0x03 +#define Index_Load_Tag_SI 0x06 +#define Index_Load_Tag_SD 0x07 +#define Index_Store_Tag_SI 0x0A +#define Index_Store_Tag_SD 0x0B +#define Create_Dirty_Excl_SD 0x0f +#define Hit_Invalidate_SI 0x12 +#define Hit_Invalidate_SD 0x13 +#define Hit_Writeback_Inv_SD 0x17 +#define Hit_Writeback_SD 0x1b +#define Hit_Set_Virtual_SI 0x1e +#define Hit_Set_Virtual_SD 0x1f + +/* + * R5000-specific cacheops + */ +#define R5K_Page_Invalidate_S 0x17 + +/* + * RM7000-specific cacheops + */ +#define Page_Invalidate_T 0x16 + +/* + * R10000-specific cacheops + * + * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused. + * Most of the _S cacheops are identical to the R4000SC _SD cacheops. + */ +#define Index_Writeback_Inv_S 0x03 +#define Index_Load_Tag_S 0x07 +#define Index_Store_Tag_S 0x0B +#define Hit_Invalidate_S 0x13 +#define Cache_Barrier 0x14 +#define Hit_Writeback_Inv_S 0x17 +#define Index_Load_Data_I 0x18 +#define Index_Load_Data_D 0x19 +#define Index_Load_Data_S 0x1b +#define Index_Store_Data_I 0x1c +#define Index_Store_Data_D 0x1d +#define Index_Store_Data_S 0x1f + +#endif /* __ASM_CACHEOPS_H */ diff --git a/target/linux/ath79/image/lzma-loader/src/config.h b/target/linux/ath79/image/lzma-loader/src/config.h new file mode 100644 index 0000000000..287392b340 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/config.h @@ -0,0 +1,31 @@ +/* + * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _CONFIG_H_ +#define _CONFIG_H_ + +#define CONFIG_ICACHE_SIZE (32 * 1024) +#define CONFIG_DCACHE_SIZE (64 * 1024) +#define CONFIG_CACHELINE_SIZE 32 + +#ifndef CONFIG_FLASH_OFFS +#define CONFIG_FLASH_OFFS 0 +#endif + +#ifndef CONFIG_FLASH_MAX +#define CONFIG_FLASH_MAX 0 +#endif + +#ifndef CONFIG_FLASH_STEP +#define CONFIG_FLASH_STEP 0x1000 +#endif + +#endif /* _CONFIG_H_ */ diff --git a/target/linux/ath79/image/lzma-loader/src/cp0regdef.h b/target/linux/ath79/image/lzma-loader/src/cp0regdef.h new file mode 100644 index 0000000000..c1188ad8c8 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/cp0regdef.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle + * + * Copyright (C) 2001, Monta Vista Software + * Author: jsun@mvista.com or jsun@junsun.net + */ +#ifndef _cp0regdef_h_ +#define _cp0regdef_h_ + +#define CP0_INDEX $0 +#define CP0_RANDOM $1 +#define CP0_ENTRYLO0 $2 +#define CP0_ENTRYLO1 $3 +#define CP0_CONTEXT $4 +#define CP0_PAGEMASK $5 +#define CP0_WIRED $6 +#define CP0_BADVADDR $8 +#define CP0_COUNT $9 +#define CP0_ENTRYHI $10 +#define CP0_COMPARE $11 +#define CP0_STATUS $12 +#define CP0_CAUSE $13 +#define CP0_EPC $14 +#define CP0_PRID $15 +#define CP0_CONFIG $16 +#define CP0_LLADDR $17 +#define CP0_WATCHLO $18 +#define CP0_WATCHHI $19 +#define CP0_XCONTEXT $20 +#define CP0_FRAMEMASK $21 +#define CP0_DIAGNOSTIC $22 +#define CP0_PERFORMANCE $25 +#define CP0_ECC $26 +#define CP0_CACHEERR $27 +#define CP0_TAGLO $28 +#define CP0_TAGHI $29 +#define CP0_ERROREPC $30 + +#endif diff --git a/target/linux/ath79/image/lzma-loader/src/head.S b/target/linux/ath79/image/lzma-loader/src/head.S new file mode 100644 index 0000000000..47a7c9bd63 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/head.S @@ -0,0 +1,121 @@ +/* + * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * Some parts of this code was based on the OpenWrt specific lzma-loader + * for the BCM47xx and ADM5120 based boards: + * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) + * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/asm.h> +#include <asm/regdef.h> +#include "cp0regdef.h" +#include "cacheops.h" +#include "config.h" + +#define KSEG0 0x80000000 + + .macro ehb + sll zero, 3 + .endm + + .text + +LEAF(startup) + .set noreorder + .set mips32 + + mtc0 zero, CP0_WATCHLO # clear watch registers + mtc0 zero, CP0_WATCHHI + mtc0 zero, CP0_CAUSE # clear before writing status register + + mfc0 t0, CP0_STATUS + li t1, 0x1000001f + or t0, t1 + xori t0, 0x1f + mtc0 t0, CP0_STATUS + ehb + + mtc0 zero, CP0_COUNT + mtc0 zero, CP0_COMPARE + ehb + + la t0, __reloc_label # get linked address of label + bal __reloc_label # branch and link to label to + nop # get actual address +__reloc_label: + subu t0, ra, t0 # get reloc_delta + + beqz t0, __reloc_done # if delta is 0 we are in the right place + nop + + /* Copy our code to the right place */ + la t1, _code_start # get linked address of _code_start + la t2, _code_end # get linked address of _code_end + addu t0, t0, t1 # calculate actual address of _code_start + +__reloc_copy: + lw t3, 0(t0) + sw t3, 0(t1) + add t1, 4 + blt t1, t2, __reloc_copy + add t0, 4 + + /* flush cache */ + la t0, _code_start + la t1, _code_end + + li t2, ~(CONFIG_CACHELINE_SIZE - 1) + and t0, t2 + and t1, t2 + li t2, CONFIG_CACHELINE_SIZE + + b __flush_check + nop + +__flush_line: + cache Hit_Writeback_Inv_D, 0(t0) + cache Hit_Invalidate_I, 0(t0) + add t0, t2 + +__flush_check: + bne t0, t1, __flush_line + nop + + sync + +__reloc_done: + + /* clear bss */ + la t0, _bss_start + la t1, _bss_end + b __bss_check + nop + +__bss_fill: + sw zero, 0(t0) + addi t0, 4 + +__bss_check: + bne t0, t1, __bss_fill + nop + + /* Setup new "C" stack */ + la sp, _stack + + /* reserve stack space for a0-a3 registers */ + subu sp, 16 + + /* jump to the decompressor routine */ + la t0, loader_main + jr t0 + nop + + .set reorder +END(startup) diff --git a/target/linux/ath79/image/lzma-loader/src/loader.c b/target/linux/ath79/image/lzma-loader/src/loader.c new file mode 100644 index 0000000000..cc73eb1721 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/loader.c @@ -0,0 +1,264 @@ +/* + * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * Some parts of this code was based on the OpenWrt specific lzma-loader + * for the BCM47xx and ADM5120 based boards: + * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) + * Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com> + * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> + * + * The image_header structure has been taken from the U-Boot project. + * (C) Copyright 2008 Semihalf + * (C) Copyright 2000-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <stddef.h> +#include <stdint.h> + +#include "config.h" +#include "cache.h" +#include "printf.h" +#include "LzmaDecode.h" + +#define AR71XX_FLASH_START 0x1f000000 +#define AR71XX_FLASH_END 0x1fe00000 + +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 + +#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) + +#undef LZMA_DEBUG + +#ifdef LZMA_DEBUG +# define DBG(f, a...) printf(f, ## a) +#else +# define DBG(f, a...) do {} while (0) +#endif + +#define IH_MAGIC_OKLI 0x4f4b4c49 /* 'OKLI' */ + +#define IH_NMLEN 32 /* Image Name Length */ + +typedef struct image_header { + uint32_t ih_magic; /* Image Header Magic Number */ + uint32_t ih_hcrc; /* Image Header CRC Checksum */ + uint32_t ih_time; /* Image Creation Timestamp */ + uint32_t ih_size; /* Image Data Size */ + uint32_t ih_load; /* Data Load Address */ + uint32_t ih_ep; /* Entry Point Address */ + uint32_t ih_dcrc; /* Image Data CRC Checksum */ + uint8_t ih_os; /* Operating System */ + uint8_t ih_arch; /* CPU architecture */ + uint8_t ih_type; /* Image Type */ + uint8_t ih_comp; /* Compression Type */ + uint8_t ih_name[IH_NMLEN]; /* Image Name */ +} image_header_t; + +/* beyond the image end, size not known in advance */ +extern unsigned char workspace[]; +extern void board_init(void); + +static CLzmaDecoderState lzma_state; +static unsigned char *lzma_data; +static unsigned long lzma_datasize; +static unsigned long lzma_outsize; +static unsigned long kernel_la; + +#ifdef CONFIG_KERNEL_CMDLINE +#define kernel_argc 2 +static const char kernel_cmdline[] = CONFIG_KERNEL_CMDLINE; +static const char *kernel_argv[] = { + NULL, + kernel_cmdline, + NULL, +}; +#endif /* CONFIG_KERNEL_CMDLINE */ + +static void halt(void) +{ + printf("\nSystem halted!\n"); + for(;;); +} + +static __inline__ unsigned long get_be32(void *buf) +{ + unsigned char *p = buf; + + return (((unsigned long) p[0] << 24) + + ((unsigned long) p[1] << 16) + + ((unsigned long) p[2] << 8) + + (unsigned long) p[3]); +} + +static __inline__ unsigned char lzma_get_byte(void) +{ + unsigned char c; + + lzma_datasize--; + c = *lzma_data++; + + return c; +} + +static int lzma_init_props(void) +{ + unsigned char props[LZMA_PROPERTIES_SIZE]; + int res; + int i; + + /* read lzma properties */ + for (i = 0; i < LZMA_PROPERTIES_SIZE; i++) + props[i] = lzma_get_byte(); + + /* read the lower half of uncompressed size in the header */ + lzma_outsize = ((SizeT) lzma_get_byte()) + + ((SizeT) lzma_get_byte() << 8) + + ((SizeT) lzma_get_byte() << 16) + + ((SizeT) lzma_get_byte() << 24); + + /* skip rest of the header (upper half of uncompressed size) */ + for (i = 0; i < 4; i++) + lzma_get_byte(); + + res = LzmaDecodeProperties(&lzma_state.Properties, props, + LZMA_PROPERTIES_SIZE); + return res; +} + +static int lzma_decompress(unsigned char *outStream) +{ + SizeT ip, op; + int ret; + + lzma_state.Probs = (CProb *) workspace; + + ret = LzmaDecode(&lzma_state, lzma_data, lzma_datasize, &ip, outStream, + lzma_outsize, &op); + + if (ret != LZMA_RESULT_OK) { + int i; + + DBG("LzmaDecode error %d at %08x, osize:%d ip:%d op:%d\n", + ret, lzma_data + ip, lzma_outsize, ip, op); + + for (i = 0; i < 16; i++) + DBG("%02x ", lzma_data[ip + i]); + + DBG("\n"); + } + + return ret; +} + +#if (LZMA_WRAPPER) +static void lzma_init_data(void) +{ + extern unsigned char _lzma_data_start[]; + extern unsigned char _lzma_data_end[]; + + kernel_la = LOADADDR; + lzma_data = _lzma_data_start; + lzma_datasize = _lzma_data_end - _lzma_data_start; +} +#else +static void lzma_init_data(void) +{ + struct image_header *hdr = NULL; + unsigned char *flash_base; + unsigned long flash_ofs; + unsigned long kernel_ofs; + unsigned long kernel_size; + + flash_base = (unsigned char *) KSEG1ADDR(AR71XX_FLASH_START); + + printf("Looking for OpenWrt image... "); + + for (flash_ofs = CONFIG_FLASH_OFFS; + flash_ofs <= (CONFIG_FLASH_OFFS + CONFIG_FLASH_MAX); + flash_ofs += CONFIG_FLASH_STEP) { + unsigned long magic; + unsigned char *p; + + p = flash_base + flash_ofs; + magic = get_be32(p); + if (magic == IH_MAGIC_OKLI) { + hdr = (struct image_header *) p; + break; + } + } + + if (hdr == NULL) { + printf("not found!\n"); + halt(); + } + + printf("found at 0x%08x\n", flash_base + flash_ofs); + + kernel_ofs = sizeof(struct image_header); + kernel_size = get_be32(&hdr->ih_size); + kernel_la = get_be32(&hdr->ih_load); + + lzma_data = flash_base + flash_ofs + kernel_ofs; + lzma_datasize = kernel_size; +} +#endif /* (LZMA_WRAPPER) */ + +void loader_main(unsigned long reg_a0, unsigned long reg_a1, + unsigned long reg_a2, unsigned long reg_a3) +{ + void (*kernel_entry) (unsigned long, unsigned long, unsigned long, + unsigned long); + int res; + + board_init(); + + printf("\n\nOpenWrt kernel loader for AR7XXX/AR9XXX\n"); + printf("Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>\n"); + + lzma_init_data(); + + res = lzma_init_props(); + if (res != LZMA_RESULT_OK) { + printf("Incorrect LZMA stream properties!\n"); + halt(); + } + + printf("Decompressing kernel... "); + + res = lzma_decompress((unsigned char *) kernel_la); + if (res != LZMA_RESULT_OK) { + printf("failed, "); + switch (res) { + case LZMA_RESULT_DATA_ERROR: + printf("data error!\n"); + break; + default: + printf("unknown error %d!\n", res); + } + halt(); + } else { + printf("done!\n"); + } + + flush_cache(kernel_la, lzma_outsize); + + printf("Starting kernel at %08x...\n\n", kernel_la); + +#ifdef CONFIG_KERNEL_CMDLINE + reg_a0 = kernel_argc; + reg_a1 = (unsigned long) kernel_argv; + reg_a2 = 0; + reg_a3 = 0; +#endif + + kernel_entry = (void *) kernel_la; + kernel_entry(reg_a0, reg_a1, reg_a2, reg_a3); +} diff --git a/target/linux/ath79/image/lzma-loader/src/loader.lds b/target/linux/ath79/image/lzma-loader/src/loader.lds new file mode 100644 index 0000000000..80cc7ca3ec --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/loader.lds @@ -0,0 +1,35 @@ +OUTPUT_ARCH(mips) +SECTIONS { + .text : { + _code_start = .; + *(.text) + *(.text.*) + *(.rodata) + *(.rodata.*) + *(.data.lzma) + } + + . = ALIGN(32); + .data : { + *(.data) + *(.data.*) + . = . + 524288; /* workaround for buggy bootloaders */ + } + + . = ALIGN(32); + _code_end = .; + + _bss_start = .; + .bss : { + *(.bss) + *(.bss.*) + } + + . = ALIGN(32); + _bss_end = .; + + . = . + 8192; + _stack = .; + + workspace = .; +} diff --git a/target/linux/ath79/image/lzma-loader/src/loader2.lds b/target/linux/ath79/image/lzma-loader/src/loader2.lds new file mode 100644 index 0000000000..db0bb46424 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/loader2.lds @@ -0,0 +1,10 @@ +OUTPUT_ARCH(mips) +SECTIONS { + .text : { + startup = .; + *(.text) + *(.text.*) + *(.data) + *(.data.*) + } +} diff --git a/target/linux/ath79/image/lzma-loader/src/lzma-data.lds b/target/linux/ath79/image/lzma-loader/src/lzma-data.lds new file mode 100644 index 0000000000..abf756ba13 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/lzma-data.lds @@ -0,0 +1,8 @@ +OUTPUT_ARCH(mips) +SECTIONS { + .data.lzma : { + _lzma_data_start = .; + *(.data) + _lzma_data_end = .; + } +} diff --git a/target/linux/ath79/image/lzma-loader/src/printf.c b/target/linux/ath79/image/lzma-loader/src/printf.c new file mode 100644 index 0000000000..7bb5a86e18 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/printf.c @@ -0,0 +1,350 @@ +/* + * Copyright (C) 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include "printf.h" + +extern void board_putc(int ch); + +/* this is the maximum width for a variable */ +#define LP_MAX_BUF 256 + +/* macros */ +#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') ) +#define Ctod(x) ( (x) - '0') + +/* forward declaration */ +static int PrintChar(char *, char, int, int); +static int PrintString(char *, char *, int, int); +static int PrintNum(char *, unsigned long, int, int, int, int, char, int); + +/* private variable */ +static const char theFatalMsg[] = "fatal error in lp_Print!"; + +/* -*- + * A low level printf() function. + */ +static void +lp_Print(void (*output)(void *, char *, int), + void * arg, + char *fmt, + va_list ap) +{ + +#define OUTPUT(arg, s, l) \ + { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \ + (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \ + } else { \ + (*output)(arg, s, l); \ + } \ + } + + char buf[LP_MAX_BUF]; + + char c; + char *s; + long int num; + + int longFlag; + int negFlag; + int width; + int prec; + int ladjust; + char padc; + + int length; + + for(;;) { + { + /* scan for the next '%' */ + char *fmtStart = fmt; + while ( (*fmt != '\0') && (*fmt != '%')) { + fmt ++; + } + + /* flush the string found so far */ + OUTPUT(arg, fmtStart, fmt-fmtStart); + + /* are we hitting the end? */ + if (*fmt == '\0') break; + } + + /* we found a '%' */ + fmt ++; + + /* check for long */ + if (*fmt == 'l') { + longFlag = 1; + fmt ++; + } else { + longFlag = 0; + } + + /* check for other prefixes */ + width = 0; + prec = -1; + ladjust = 0; + padc = ' '; + + if (*fmt == '-') { + ladjust = 1; + fmt ++; + } + + if (*fmt == '0') { + padc = '0'; + fmt++; + } + + if (IsDigit(*fmt)) { + while (IsDigit(*fmt)) { + width = 10 * width + Ctod(*fmt++); + } + } + + if (*fmt == '.') { + fmt ++; + if (IsDigit(*fmt)) { + prec = 0; + while (IsDigit(*fmt)) { + prec = prec*10 + Ctod(*fmt++); + } + } + } + + + /* check format flag */ + negFlag = 0; + switch (*fmt) { + case 'b': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'd': + case 'D': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + if (num < 0) { + num = - num; + negFlag = 1; + } + length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'o': + case 'O': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'u': + case 'U': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'x': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'X': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1); + OUTPUT(arg, buf, length); + break; + + case 'c': + c = (char)va_arg(ap, int); + length = PrintChar(buf, c, width, ladjust); + OUTPUT(arg, buf, length); + break; + + case 's': + s = (char*)va_arg(ap, char *); + length = PrintString(buf, s, width, ladjust); + OUTPUT(arg, buf, length); + break; + + case '\0': + fmt --; + break; + + default: + /* output this char as it is */ + OUTPUT(arg, fmt, 1); + } /* switch (*fmt) */ + + fmt ++; + } /* for(;;) */ + + /* special termination call */ + OUTPUT(arg, "\0", 1); +} + + +/* --------------- local help functions --------------------- */ +static int +PrintChar(char * buf, char c, int length, int ladjust) +{ + int i; + + if (length < 1) length = 1; + if (ladjust) { + *buf = c; + for (i=1; i< length; i++) buf[i] = ' '; + } else { + for (i=0; i< length-1; i++) buf[i] = ' '; + buf[length - 1] = c; + } + return length; +} + +static int +PrintString(char * buf, char* s, int length, int ladjust) +{ + int i; + int len=0; + char* s1 = s; + while (*s1++) len++; + if (length < len) length = len; + + if (ladjust) { + for (i=0; i< len; i++) buf[i] = s[i]; + for (i=len; i< length; i++) buf[i] = ' '; + } else { + for (i=0; i< length-len; i++) buf[i] = ' '; + for (i=length-len; i < length; i++) buf[i] = s[i-length+len]; + } + return length; +} + +static int +PrintNum(char * buf, unsigned long u, int base, int negFlag, + int length, int ladjust, char padc, int upcase) +{ + /* algorithm : + * 1. prints the number from left to right in reverse form. + * 2. fill the remaining spaces with padc if length is longer than + * the actual length + * TRICKY : if left adjusted, no "0" padding. + * if negtive, insert "0" padding between "0" and number. + * 3. if (!ladjust) we reverse the whole string including paddings + * 4. otherwise we only reverse the actual string representing the num. + */ + + int actualLength =0; + char *p = buf; + int i; + + do { + int tmp = u %base; + if (tmp <= 9) { + *p++ = '0' + tmp; + } else if (upcase) { + *p++ = 'A' + tmp - 10; + } else { + *p++ = 'a' + tmp - 10; + } + u /= base; + } while (u != 0); + + if (negFlag) { + *p++ = '-'; + } + + /* figure out actual length and adjust the maximum length */ + actualLength = p - buf; + if (length < actualLength) length = actualLength; + + /* add padding */ + if (ladjust) { + padc = ' '; + } + if (negFlag && !ladjust && (padc == '0')) { + for (i = actualLength-1; i< length-1; i++) buf[i] = padc; + buf[length -1] = '-'; + } else { + for (i = actualLength; i< length; i++) buf[i] = padc; + } + + + /* prepare to reverse the string */ + { + int begin = 0; + int end; + if (ladjust) { + end = actualLength - 1; + } else { + end = length -1; + } + + while (end > begin) { + char tmp = buf[begin]; + buf[begin] = buf[end]; + buf[end] = tmp; + begin ++; + end --; + } + } + + /* adjust the string pointer */ + return length; +} + +static void printf_output(void *arg, char *s, int l) +{ + int i; + + // special termination call + if ((l==1) && (s[0] == '\0')) return; + + for (i=0; i< l; i++) { + board_putc(s[i]); + if (s[i] == '\n') board_putc('\r'); + } +} + +void printf(char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + lp_Print(printf_output, 0, fmt, ap); + va_end(ap); +} diff --git a/target/linux/ath79/image/lzma-loader/src/printf.h b/target/linux/ath79/image/lzma-loader/src/printf.h new file mode 100644 index 0000000000..9b1c1df232 --- /dev/null +++ b/target/linux/ath79/image/lzma-loader/src/printf.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef _printf_h_ +#define _printf_h_ + +#include <stdarg.h> +void printf(char *fmt, ...); + +#endif /* _printf_h_ */ diff --git a/target/linux/ath79/image/tp-link.mk b/target/linux/ath79/image/tp-link.mk new file mode 100644 index 0000000000..bbe4054143 --- /dev/null +++ b/target/linux/ath79/image/tp-link.mk @@ -0,0 +1,119 @@ +DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION TPLINK_BOARD_NAME + +# combine kernel and rootfs into one image +# mktplinkfw <type> <optional extra arguments to mktplinkfw binary> +# <type> is "sysupgrade" or "factory" +# +# -a align the rootfs start on an <align> bytes boundary +# -j add jffs2 end-of-filesystem markers +# -s strip padding from end of the image +# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x) +define Build/mktplinkfw + -$(STAGING_DIR_HOST)/bin/mktplinkfw \ + -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \ + -m $(TPLINK_HEADER_VERSION) \ + -k $(IMAGE_KERNEL) \ + -r $@ \ + -o $@.new \ + -j -X 0x40000 \ + -a $(call rootfs_align,$(FILESYSTEM)) \ + $(wordlist 2,$(words $(1)),$(1)) \ + $(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@ +endef + +# mktplinkfw-combined +# +# -c combined image +define Build/mktplinkfw-combined + $(STAGING_DIR_HOST)/bin/mktplinkfw \ + -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $(1) \ + -m $(TPLINK_HEADER_VERSION) \ + -k $@ \ + -o $@.new \ + -s -S \ + -c + @mv $@.new $@ +endef + +# add RE450 and similar header to the kernel image +define Build/mktplinkfw-kernel + $(STAGING_DIR_HOST)/bin/mktplinkfw-kernel \ + -H $(TPLINK_HWID) -N OpenWrt -V $(REVISION) \ + -L $(KERNEL_LOADADDR) -E $(KERNEL_LOADADDR) \ + -k $@ \ + -o $@.new + @mv $@.new $@ +endef + +define Build/uImageArcher + mkimage -A $(LINUX_KARCH) \ + -O linux -T kernel \ + -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \ + -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new + @mv $@.new $@ +endef + + +define Device/tplink + TPLINK_HWREV := 0x1 + TPLINK_HEADER_VERSION := 1 + LOADER_TYPE := gz + KERNEL := kernel-bin | patch-cmdline | lzma + KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | mktplinkfw-combined +# IMAGES := sysupgrade.bin + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade +# IMAGE/factory.bin := append-rootfs | mktplinkfw factory | a +endef + +define Device/tplink-nolzma +$(Device/tplink) + LOADER_FLASH_OFFS := 0x22000 + COMPILE := loader-$(1).gz + COMPILE/loader-$(1).gz := loader-okli-compile + #KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) + KERNEL:= kernel-bin | append-dtb | lzma |uImage lzma -M 0x4f4b4c49 | loader-okli $(1) + KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel-cmdline | mktplinkfw-combined +endef + +define Device/tplink-4m +$(Device/tplink-nolzma) + TPLINK_FLASHLAYOUT := 4M + IMAGE_SIZE := 3904k +endef + +define Device/tplink-8m +$(Device/tplink-nolzma) + TPLINK_FLASHLAYOUT := 8M + IMAGE_SIZE := 7936k +endef + +define Device/tplink-4mlzma +$(Device/tplink) + TPLINK_FLASHLAYOUT := 4Mlzma + IMAGE_SIZE := 3904k +endef + +define Device/tplink-8mlzma +$(Device/tplink) + TPLINK_FLASHLAYOUT := 8Mlzma + IMAGE_SIZE := 7936k +endef + +define Device/tplink-16mlzma +$(Device/tplink) + TPLINK_FLASHLAYOUT := 16Mlzma + IMAGE_SIZE := 15872k +endef + +define Device/tl_wr1043nd_v1 + $(Device/tplink-8m) + ATH_SOC := ar9132 + DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport + BOARDNAME := TL-WR1043ND + DEVICE_PROFILE := TLWR1043 + TPLINK_HWID := 0x10430001 +endef + +#TARGET_DEVICES += tl_wr1043nd_v1 |