diff options
Diffstat (limited to 'target/linux/ath79/dts')
-rw-r--r-- | target/linux/ath79/dts/qca9561_nec_wf1200cr.dts | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9561_nec_wf1200cr.dts b/target/linux/ath79/dts/qca9561_nec_wf1200cr.dts new file mode 100644 index 0000000000..90aac30d7f --- /dev/null +++ b/target/linux/ath79/dts/qca9561_nec_wf1200cr.dts @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca956x.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "NEC Aterm WF1200CR"; + compatible = "nec,wf1200cr", "qca,qca9561"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + leds { + compatible = "gpio-leds"; + /* other LEDs are connected to ath10k (QCA9888) gpiochip */ + + led_power_green: power_green { + label = "green:power"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + led_power_red: power_red { + label = "red:power"; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + debounce-interval = <60>; + }; + + router { + label = "rt"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + linux,input-type = <EV_SW>; + debounce-interval = <60>; + }; + + wps { + label = "wps"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + debounce-interval = <60>; + }; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "devdata"; + reg = <0x040000 0x010000>; + read-only; + }; + + partition@50000 { + label = "devconf"; + reg = <0x050000 0x010000>; + read-only; + }; + + partition@60000 { + label = "misc"; + reg = <0x060000 0x010000>; + read-only; + }; + + partition@70000 { + compatible = "seama"; + label = "firmware"; + reg = <0x070000 0x780000>; + }; + + partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x03000101 0x00000101 0x00001919>; + + phy-handle = <&swphy0>; + + gmac-config { + device = <&gmac>; + + switch-phy-swap = <1>; + switch-phy-addr-swap = <0>; + }; +}; + +ð1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_swled_enable_pins>; +}; + +&gpio { + switch_leds { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>, /* WAN */ + <19 GPIO_ACTIVE_HIGH>; /* LAN */ + output-high; + line-name = "led:wan-lan"; + }; +}; + +&pinmux { + pinmux_swled_enable_pins: swled_enable_pins { + pinctrl-single,bits = + <0xc 0x240000 0xff0000>, /* WAN */ + <0x10 0x10000000 0xff000000>; /* LAN */ + }; +}; + +&pcie { + status = "okay"; + + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0x0000 0 0 0 0>; + }; +}; + +&wmac { + status = "okay"; + + qca,no-eeprom; +}; |