diff options
Diffstat (limited to 'target/linux/ath79/dts')
-rw-r--r-- | target/linux/ath79/dts/ar9331_teltonika_rut230-v1.dts | 193 |
1 files changed, 193 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9331_teltonika_rut230-v1.dts b/target/linux/ath79/dts/ar9331_teltonika_rut230-v1.dts new file mode 100644 index 0000000000..c394cf1cb8 --- /dev/null +++ b/target/linux/ath79/dts/ar9331_teltonika_rut230-v1.dts @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9331.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Teltonika RUT230 v1"; + compatible = "teltonika,rut230-v1", "qca,ar9331"; + + aliases { + label-mac-device = &wmac; + led-boot = &led_ss0; + led-failsafe = &led_ss0; + led-upgrade = &led_ss0; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + + input { + label = "input"; + linux,code = <BTN_0>; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + sim-tray { + label = "sim-tray"; + linux,code = <BTN_1>; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&switch_led_disable_pins>; + + led_ss0: signal-strength-0 { + label = "green:signal-strength-0"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + }; + + signal-strength-1 { + label = "green:signal-strength-1"; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + }; + + signal-strength-2 { + label = "green:signal-strength-2"; + gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; + }; + + signal-strength-3 { + label = "green:signal-strength-3"; + gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; + }; + + signal-strength-4 { + label = "green:signal-strength4"; + gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + }; + + 2g { + label = "green:2g"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + }; + + 3g { + label = "green:3g"; + gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + }; + + lan { + label = "green:lan"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + /* GPIO 13 - ACTIVE HIGH for hwrev 0 */ + }; + + wan { + label = "green:wan"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + /* GPIO 14 - ACTIVE HIGH for hwrev 0 */ + }; + + /* 4G LED - GPIO21 ACTIVE_HIGH for RUT240 */ + }; + + reg_usb_vbus: reg_usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&config 0x0>; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&config 0x0>; + mtd-mac-address-increment = <1>; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + config: partition@20000 { + label = "config"; + reg = <0x20000 0x10000>; + read-only; + }; + + art: partition@30000 { + label = "art"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x40000 0xf30000>; + }; + + partition@f70000 { + label = "event-log"; + reg = <0xf70000 0x90000>; + read-only; + }; + }; + }; +}; + +&usb { + dr_mode = "host"; + vbus-supply = <®_usb_vbus>; + status = "okay"; +}; + +&gpio { + modem-power { + gpio-hog; + output-low; + gpios = <18 GPIO_ACTIVE_HIGH>; + line-name = "modem-power"; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&config 0x0>; + mtd-mac-address-increment = <2>; +}; |