diff options
Diffstat (limited to 'target/linux/ath79/dts')
-rw-r--r-- | target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi | 130 | ||||
-rw-r--r-- | target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts | 33 | ||||
-rw-r--r-- | target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi | 130 |
3 files changed, 168 insertions, 125 deletions
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi index f86ff30fc7..cb329a9a66 100644 --- a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi +++ b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi @@ -1,135 +1,15 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "qca9533_tplink_cpexxx.dtsi" -#include "qca953x.dtsi" - -/ { - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - - aliases { - led-boot = &system; - led-failsafe = &system; - led-running = &system; - led-upgrade = &system; - }; - - leds { - compatible = "gpio-leds"; - - lan { - label = "tp-link:green:lan"; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - - link1 { - label = "tp-link:green:link1"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - }; - - link2 { - label = "tp-link:green:link2"; - gpios = <&gpio 14 GPIO_ACTIVE_LOW>; - }; - - link3 { - label = "tp-link:green:link3"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - - system: link4 { - label = "tp-link:green:link4"; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - reset_button { - label = "Reset button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - uboot: partition@0 { - label = "u-boot"; - reg = <0x000000 0x020000>; - read-only; - }; - - partition@20000 { - label = "partition-table"; - reg = <0x020000 0x10000>; - read-only; - }; - - info: partition@30000 { - label = "info"; - reg = <0x030000 0x10000>; - read-only; - }; - - partition@40000 { - label = "firmware"; - reg = <0x040000 0x780000>; - compatible = "tplink,firmware"; - }; - - config: partition@7c0000 { - label = "config"; - reg = <0x7c0000 0x30000>; - read-only; - }; - - art: partition@7f0000 { - label = "art"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; +&leds { + lan { + label = "tp-link:green:lan"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; }; -ð0 { - status = "okay"; - phy-handle = <&swphy4>; - mtd-mac-address = <&info 0x8>; -}; - ð1 { compatible = "syscon", "simple-mfd"; }; - -&wmac { - status = "okay"; - mtd-cal-data = <&art 0x1000>; - mtd-mac-address = <&info 0x8>; -}; diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts b/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts new file mode 100644 index 0000000000..dd90eb1c7d --- /dev/null +++ b/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9533_tplink_cpexxx.dtsi" + +/ { + compatible = "tplink,cpe220-v3", "qca,qca9533"; + model = "TP-Link CPE220 v3"; +}; + +&leds { + lan0 { + label = "tp-link:green:lan0"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "tp-link:green:lan1"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&info 0x8>; + + gmac-config { + device = <&gmac>; + switch-phy-swap = <0>; + switch-only-mode = <1>; + }; +}; diff --git a/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi b/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi new file mode 100644 index 0000000000..ae9cb24aa0 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca953x.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-boot = &led_link4; + led-failsafe = &led_link4; + led-running = &led_link4; + led-upgrade = &led_link4; + }; + + leds: leds { + compatible = "gpio-leds"; + + link1 { + label = "tp-link:green:link1"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + link2 { + label = "tp-link:green:link2"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + link3 { + label = "tp-link:green:link3"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + led_link4: link4 { + label = "tp-link:green:link4"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset_button { + label = "Reset button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&spi { + status = "okay"; + + num-cs = <1>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + label = "partition-table"; + reg = <0x020000 0x010000>; + read-only; + }; + + info: partition@30000 { + label = "info"; + reg = <0x030000 0x010000>; + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x040000 0x780000>; + compatible = "tplink,firmware"; + }; + + config: partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x030000>; + read-only; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&info 0x8>; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; + + mtd-mac-address = <&info 0x8>; +}; |