diff options
Diffstat (limited to 'target/linux/ath79/dts')
3 files changed, 208 insertions, 138 deletions
diff --git a/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts b/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts new file mode 100644 index 0000000000..287dee6bb1 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca9563_elecom_wrc-ghbk2-i.dtsi" + +/ { + model = "ELECOM WRC-1750GHBK2-I/C"; + compatible = "elecom,wrc-1750ghbk2-i", "qca,qca9563"; +}; + +&leds { + power: power { + label = "elecom:blue:power"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + wlan2g { + label = "elecom:blue:wlan2g"; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + + wlan5g { + label = "elecom:blue:wlan5g"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; +}; + +&partitions { + partition@70000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x070000 0xf70000>; + }; + + partition@fe0000 { + label = "hwconfig"; + reg = <0xfe0000 0x010000>; + read-only; + }; + + ART: partition@ff0000 { + label = "ART"; + reg = <0xff0000 0x010000>; + read-only; + }; +}; + +&pcie { + status = "okay"; +}; diff --git a/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts b/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts index bb1f350150..c823f4a342 100644 --- a/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts +++ b/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts @@ -4,156 +4,43 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -#include "qca956x.dtsi" +#include "qca9563_elecom_wrc-ghbk2-i.dtsi" / { model = "ELECOM WRC-300GHBK2-I"; compatible = "elecom,wrc-300ghbk2-i", "qca,qca9563"; +}; - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; +&leds { + power: power { + label = "elecom:white:power"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; - leds { - compatible = "gpio-leds"; - - power: power { - label = "wrc-300ghbk2-i:white:power"; - gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - wlan2g { - label = "wrc-300ghbk2-i:white:wlan2g"; - gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wps { - label = "wrc-300ghbk2-i:red:wps"; - gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - }; - - button_wps { - label = "wps"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - }; - - ap { - label = "ap"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - linux,input-type = <EV_SW>; - debounce-interval = <60>; - }; + wlan2g { + label = "elecom:white:wlan2g"; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; }; }; -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@40000 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - read-only; - }; - - partition@50000 { - label = "nvram"; - reg = <0x050000 0x020000>; - read-only; - }; - - partition@70000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x070000 0x770000>; - }; - - partition@7e0000 { - label = "hwconfig"; - reg = <0x7e0000 0x010000>; - read-only; - }; - - ART: partition@7f0000 { - label = "ART"; - reg = <0x7f0000 0x010000>; - read-only; - }; - }; +&partitions { + partition@70000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x070000 0x770000>; }; -}; - -&mdio0 { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "sgmii"; - qca,ar8327-initvals = < - 0x04 0x00000080 /* PORT0 PAD MODE CTRL */ - 0x50 0xcf37cf37 /* LED_CTRL0 */ - 0x54 0x00000000 /* LED_CTRL1 */ - 0x58 0x00000000 /* LED_CTRL2 */ - 0x5c 0x03ffff00 /* LED_CTRL3 */ - 0x7c 0x0000007e /* PORT0_STATUS */ - >; + partition@7e0000 { + label = "hwconfig"; + reg = <0x7e0000 0x010000>; + read-only; }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&ART 0x1002>; - mtd-mac-address-increment = <(-1)>; - phy-mode = "sgmii"; - phy-handle = <&phy0>; -}; -&uart { - status = "okay"; -}; - -&wmac { - status = "okay"; - mtd-cal-data = <&ART 0x1000>; + ART: partition@7f0000 { + label = "ART"; + reg = <0x7f0000 0x010000>; + read-only; + }; }; diff --git a/target/linux/ath79/dts/qca9563_elecom_wrc-ghbk2-i.dtsi b/target/linux/ath79/dts/qca9563_elecom_wrc-ghbk2-i.dtsi new file mode 100644 index 0000000000..8d5bbe180c --- /dev/null +++ b/target/linux/ath79/dts/qca9563_elecom_wrc-ghbk2-i.dtsi @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca956x.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + leds: leds { + compatible = "gpio-leds"; + + wps { + label = "elecom:red:wps"; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + debounce-interval = <60>; + }; + + button_wps { + label = "wps"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + debounce-interval = <60>; + }; + + ap { + label = "ap"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + linux,input-type = <EV_SW>; + debounce-interval = <60>; + }; + }; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + read-only; + }; + + partition@50000 { + label = "nvram"; + reg = <0x050000 0x020000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + + qca,ar8327-initvals = < + 0x04 0x00000080 /* PORT0 PAD MODE CTRL */ + 0x50 0xcf37cf37 /* LED_CTRL0 */ + 0x54 0x00000000 /* LED_CTRL1 */ + 0x58 0x00000000 /* LED_CTRL2 */ + 0x5c 0x03ffff00 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x03000101 0x00000101 0x00001919>; + + mtd-mac-address = <&ART 0x1002>; + mtd-mac-address-increment = <(-1)>; + phy-mode = "sgmii"; + phy-handle = <&phy0>; +}; + +&uart { + status = "okay"; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&ART 0x1000>; +}; |