diff options
Diffstat (limited to 'target/linux/ath79/dts')
| -rw-r--r-- | target/linux/ath79/dts/ar7161_netgear_wndr3800.dts | 49 |
1 files changed, 37 insertions, 12 deletions
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts index a175fd7698..7a7279bdf5 100644 --- a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts +++ b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts @@ -10,6 +10,14 @@ compatible = "netgear,wndr3800", "qca,ar7161"; model = "Netgear WNDR3800"; + aliases { + led-status = &power_green; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + memory@0 { device_type = "memory"; reg = <0x0 0x8000000>; @@ -25,9 +33,11 @@ reset-leds { compatible = "reset-leds"; - wps { + usb_led { label = "netgear:green:usb"; resets = <&rst 12>; + trigger-sources = <&usb_ochi_port>, <&usb_echi_port>; + linux,default-trigger = "usbport"; }; }; @@ -40,15 +50,15 @@ default-state = "off"; }; - power_green { + power_green: power_green { label = "netgear:green:power"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; default-state = "off"; }; power_orange { label = "netgear:orange:power"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; @@ -71,21 +81,21 @@ #size-cells = <0>; poll-interval = <100>; - button@0 { + wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; - button@1 { + reset { label = "reset"; linux,code = <KEY_RESTART>; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; }; - button@2 { - label = "wifi"; - linux,code = <BTN_2>; + rfkill { + label = "rfkill"; + linux,code = <KEY_RFKILL>; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; }; @@ -114,10 +124,20 @@ &usb1 { status = "okay"; + + usb_ochi_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; }; &usb2 { status = "okay"; + + usb_echi_port: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; }; &pcie0 { @@ -153,14 +173,15 @@ partition@1 { label = "u-boot-env"; reg = <0x050000 0x020000>; + read-only; }; partition@2 { label = "firmware"; - reg = <0x70000 0xf80000>; + reg = <0x070000 0xf80000>; }; - partition@3 { + art: partition@3 { label = "art"; reg = <0xff0000 0x010000>; read-only; @@ -174,6 +195,8 @@ pll-data = <0x11110000 0x00001099 0x00991099>; + mtd-mac-address = <&art 0x00>; + fixed-link { speed = <1000>; full-duplex; @@ -185,6 +208,8 @@ pll-data = <0x11110000 0x00001099 0x00991099>; + mtd-mac-address = <&art 0x06>; + resets = <&rst 13>; reset-names = "mac"; |