diff options
Diffstat (limited to 'target/linux/ath79/dts/qca9563_zte_mf286.dts')
-rw-r--r-- | target/linux/ath79/dts/qca9563_zte_mf286.dts | 264 |
1 files changed, 69 insertions, 195 deletions
diff --git a/target/linux/ath79/dts/qca9563_zte_mf286.dts b/target/linux/ath79/dts/qca9563_zte_mf286.dts index c4ebdebd10..2e528a6b97 100644 --- a/target/linux/ath79/dts/qca9563_zte_mf286.dts +++ b/target/linux/ath79/dts/qca9563_zte_mf286.dts @@ -1,72 +1,12 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT // Copyright (c) 2021 Cezary Jackiewicz // Copyright (c) 2021, 2022 Lech Perczak -#include "qca956x.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> +#include "qca9563_zte_mf286.dtsi" / { model = "ZTE MF286"; compatible = "zte,mf286", "qca,qca9563"; - aliases { - led-boot = &led_debug; - led-failsafe = &led_debug; - led-running = &led_debug; - led-upgrade = &led_debug; - label-mac-device = ð0; - }; - - leds { - compatible = "gpio-leds"; - - /* Hidden green SMD LED below signal strength LEDs - * Visible through slits underside of the case, - * and slightly through the case below signal state LEDs */ - led_debug: led-0 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_DEBUG; - label = "green:debug"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - wifi { - label = "wifi"; - linux,code = <KEY_RFKILL>; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - - /* This GPIO is used to reset whole board _including_ the modem */ - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; - active-delay = <3000>; - inactive-delay = <1000>; - }; - ubi-concat { compatible = "mtd-concat"; devices = <&ubiconcat0 &ubiconcat1>; @@ -84,173 +24,107 @@ }; }; -&gpio { - /* GPIO19 is used as a mask to enable WLAN LED - * in stock firmware, which is controlled directly - * by 5GHz Wi-Fi chip, which currently is inactive - * in OpenWrt */ - led-wlan { - gpio-hog; - gpios = <19 GPIO_ACTIVE_LOW>; - output-high; - line-name = "led:wlan"; +&led_debug { + /* Hidden green SMD LED below signal strength LEDs + * Visible through slits underside of the case, + * and slightly through the case below signal state LEDs + */ + color = <LED_COLOR_ID_GREEN>; + label = "green:debug"; +}; + +&boot_flash { + partitions { + partition@0 { + label = "u-boot"; + reg = <0x000000 0x080000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x080000 0x020000>; + read-only; + }; }; }; -&spi { - status = "okay"; +&system_flash { + partitions { + partition@0 { + label = "fota-flag"; + reg = <0x000000 0x140000>; + read-only; + }; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; + partition@140000 { + label = "caldata"; + reg = <0x140000 0x140000>; + read-only; - partitions { - compatible = "fixed-partitions"; + compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; - partition@0 { - label = "u-boot"; - reg = <0x000000 0x080000>; - read-only; + cal_caldata_1000: cal@1000 { + reg = <0x1000 0x440>; }; - partition@80000 { - label = "u-boot-env"; - reg = <0x080000 0x020000>; - read-only; + cal_caldata_5000: cal@5000 { + reg = <0x5000 0x844>; }; }; - }; - flash@1 { - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <25000000>; + partition@280000 { + label = "mac"; + reg = <0x280000 0x140000>; + read-only; - partitions { - compatible = "fixed-partitions"; + compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; - partition@0 { - label = "fota-flag"; - reg = <0x000000 0x140000>; - read-only; - }; - - caldata: partition@140000 { - label = "caldata"; - reg = <0x140000 0x140000>; - read-only; - - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - cal_caldata_1000: cal@1000 { - reg = <0x1000 0x440>; - }; - - cal_caldata_5000: cal@5000 { - reg = <0x5000 0x844>; - }; - }; - - mac: partition@280000 { - label = "mac"; - reg = <0x280000 0x140000>; - read-only; - - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_mac_0: macaddr@0 { - reg = <0x0 0x6>; - }; - }; - - /* This encompasses stock cfg-param, oops, web partitions, - * which can be overwritten safely */ - ubiconcat0: partition@3c0000 { - label = "ubiconcat0"; - reg = <0x3c0000 0xf40000>; - }; - - /* Kernel MTD size is increased to 4MB from stock 3MB */ - partition@1300000 { - label = "kernel"; - reg = <0x1300000 0x400000>; - }; - - /* This encompasses stock rootfs, data, fota partitions, - * which can be overwritten safely */ - ubiconcat1: partition@1600000 { - label = "ubiconcat1"; - reg = <0x1700000 0x6900000>; + macaddr_mac_0: macaddr@0 { + reg = <0x0 0x6>; }; }; - }; -}; -&mdio0 { - status = "okay"; + /* This encompasses stock cfg-param, oops, web partitions, + * which can be overwritten safely + */ + ubiconcat0: partition@3c0000 { + label = "ubiconcat0"; + reg = <0x3c0000 0xf40000>; + }; - phy-mask = <0>; - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "sgmii"; + /* Kernel MTD size is increased to 4MB from stock 3MB */ + partition@1300000 { + label = "kernel"; + reg = <0x1300000 0x400000>; + }; - qca,ar8327-initvals = < - 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ - 0x7c 0x0000007e /* PORT0_STATUS */ - >; + /* This encompasses stock rootfs, data, fota partitions, + * which can be overwritten safely + */ + ubiconcat1: partition@1600000 { + label = "ubiconcat1"; + reg = <0x1700000 0x6900000>; + }; }; }; ð0 { - status = "okay"; - nvmem-cells = <&macaddr_mac_0>; nvmem-cell-names = "mac-address"; - phy-mode = "sgmii"; - phy-handle = <&phy0>; }; -&pcie { - status = "okay"; - - wifi@0,0 { - compatible = "qcom,ath10k"; - reg = <0x0 0 0 0 0>; - - nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_5000>; - nvmem-cell-names = "mac-address", "calibration"; - mac-address-increment = <1>; - }; +&wifi_ath10k { + nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_5000>; + nvmem-cell-names = "mac-address", "calibration"; + mac-address-increment = <1>; }; &wmac { - status = "okay"; - nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_1000>; nvmem-cell-names = "mac-address", "calibration"; }; - -&usb_phy0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb_phy1 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; |