aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi')
-rw-r--r--target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi102
1 files changed, 102 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi b/target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi
new file mode 100644
index 0000000000..c5770a7512
--- /dev/null
+++ b/target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ serial0 = &uart;
+ };
+
+ keys: keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio11>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <1>;
+ switch-phy-swap = <1>;
+ };
+};
+
+&eth1 {
+ status = "okay";
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+&pinmux {
+ enable_gpio11: pinmux_enable_gpio11 {
+ pinctrl-single,bits = <0x0 0x0 0x4>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ compatible = "tplink,firmware";
+ };
+
+ partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};