diff options
Diffstat (limited to 'target/linux/ath79/dts/ar9331_ew_dorin.dts')
-rw-r--r-- | target/linux/ath79/dts/ar9331_ew_dorin.dts | 130 |
1 files changed, 0 insertions, 130 deletions
diff --git a/target/linux/ath79/dts/ar9331_ew_dorin.dts b/target/linux/ath79/dts/ar9331_ew_dorin.dts deleted file mode 100644 index fd18593807..0000000000 --- a/target/linux/ath79/dts/ar9331_ew_dorin.dts +++ /dev/null @@ -1,130 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -#include "ar9331.dtsi" - -/ { - model = "Embedded Wireless Dorin"; - compatible = "embeddedwireless,dorin"; - - aliases { - serial0 = &uart; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - leds { - compatible = "gpio-leds"; - - status { - label = "dorin:green:status"; - gpios = <&gpio 21 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-chipselects = <1>; - status = "okay"; - - spiflash { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@2 { - label = "firmware"; - reg = <0x050000 0xfa0000>; - }; - - art: partition@3 { - label = "ART"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -ð1 { - status = "okay"; - - mtd-mac-address = <&art 0x1002>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - - gmac-config { - device = <&gmac>; - - switch-phy-addr-swap = <1>; - switch-phy-swap = <1>; - }; -}; - -&mdio1 { - status = "okay"; -}; |