diff options
Diffstat (limited to 'target/linux/ath79/dts/ar7241_ubnt-xm.dtsi')
-rw-r--r-- | target/linux/ath79/dts/ar7241_ubnt-xm.dtsi | 146 |
1 files changed, 146 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar7241_ubnt-xm.dtsi b/target/linux/ath79/dts/ar7241_ubnt-xm.dtsi new file mode 100644 index 0000000000..c9ad0413dc --- /dev/null +++ b/target/linux/ath79/dts/ar7241_ubnt-xm.dtsi @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar7241.dtsi" + +/ { + compatible = "ubnt,xm", "qca,ar7241"; + model = "Ubiquiti Networks XM (rev 1.0) board"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + +/* extosc: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; +*/ + keys { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + + poll-interval = <20>; + button@0 { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "ubnt:red:link1"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + + led@1 { + label = "ubnt:orange:link2"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + + led@2 { + label = "ubnt:green:link3"; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + + led@3 { + label = "ubnt:green:link4"; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +/*&pll { + clocks = <&extosc>; +};*/ + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0>; + spi-max-frequency = <25000000>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + }; + + partition@1 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@2 { + label = "firmware"; + reg = <0x050000 0x750000>; + }; + + partition@3 { + label = "board_config"; + reg = <0x7a0000 0x010000>; + read-only; + }; + + partition@4 { + label = "cfg"; + reg = <0x7b0000 0x040000>; + read-only; + }; + + art: partition@5 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; +}; + +&pcie { + status = "okay"; + + ath9k@0000 { + reg = <0x0000 0 0 0 0>; + qca,no-eeprom; + }; +}; + +&mdio0 { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "mii"; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + + phy-mode = "mii"; + phy-handle = <&phy4>; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&art 0x6>; +}; |