1 files changed, 0 insertions, 153 deletions
diff --git a/target/linux/ath79/dts/ar7241_ubnt-xm.dtsi b/target/linux/ath79/dts/ar7241_ubnt-xm.dtsi
deleted file mode 100644
index bea9adc5d4..0000000000
--- a/target/linux/ath79/dts/ar7241_ubnt-xm.dtsi
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7241.dtsi"
-
-/ {
-	compatible = "ubnt,xm", "qca,ar7241";
-	model = "Ubiquiti Networks XM (rev 1.0) board";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x2000000>;
-	};
-
-/*	extosc: ref {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <40000000>;
-	};
-*/
-	keys {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		poll-interval = <20>;
-		button@0 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@0 {
-			label = "ubnt:red:link1";
-			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		led@1 {
-			label = "ubnt:orange:link2";
-			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led@2 {
-			label = "ubnt:green:link3";
-			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		led@3 {
-			label = "ubnt:green:link4";
-			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&uart {
-	status = "okay";
-};
-
-/*&pll {
-	clocks = <&extosc>;
-};*/
-
-&spi {
-	status = "okay";
-	num-cs = <1>;
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "mx25l6405d";
-		reg = <0>;
-		spi-max-frequency = <25000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x000000 0x040000>;
-				read-only;
-			};
-
-			partition@1 {
-				label = "u-boot-env";
-				reg = <0x040000 0x010000>;
-			};
-
-			partition@2 {
-				label = "firmware";
-				reg = <0x050000 0x750000>;
-			};
-
-			partition@3 {
-				label = "board_config";
-				reg = <0x7a0000 0x010000>;
-				read-only;
-			};
-
-			partition@4 {
-				label = "cfg";
-				reg = <0x7b0000 0x040000>;
-				read-only;
-			};
-
-			art: partition@5 {
-				label = "art";
-				reg = <0x7f0000 0x010000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-
-	ath9k@0000 {
-		reg = <0x0000 0 0 0 0>;
-		qca,no-eeprom;
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-		phy-mode = "mii";
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	mtd-mac-address = <&art 0x0>;
-
-	phy-mode = "mii";
-	phy-handle = <&phy4>;
-};
-
-&eth1 {
-	status = "okay";
-
-	mtd-mac-address = <&art 0x6>;
-};