1 files changed, 17 insertions, 193 deletions
diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
index 725583c491..83d3be0125 100644
--- a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
@@ -1,211 +1,35 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7100.dtsi"
+#include "ar7161_netgear_wndr3700.dtsi"
 
 / {
 	compatible = "netgear,wndr3800", "qca,ar7161";
 	model = "Netgear WNDR3800";
-
-	aliases {
-		led-status = &power_green;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	extosc: ref {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-output-names = "ref";
-		clock-frequency = <40000000>;
-	};
-
-	reset-leds {
-		compatible = "reset-leds";
-
-		usb_led {
-			label = "netgear:green:usb";
-			resets = <&rst 12>;
-			trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
-			linux,default-trigger = "usbport";
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		wps {
-			label = "netgear:orange:wps";
-			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		power_green: power_green {
-			label = "netgear:green:power";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		power_orange {
-			label = "netgear:orange:power";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		wps_green {
-			label = "netgear:green:wps";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		wan_green {
-			label = "netgear:green:wan";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-		};
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-
-		rfkill {
-			label = "rfkill";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	rtl8366s {
-		compatible = "realtek,rtl8366s";
-		gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
-		gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
-
-		mdio-bus {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "okay";
-
-			phy-mask = <0x10>;
-
-			phy4: ethernet-phy@4 {
-				reg = <4>;
-				phy-mode = "rgmii";
-			};
-		};
-	};
-};
-
-&usb_phy {
-	status = "okay";
 };
 
-&usb1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	usb_ochi_port: port@1 {
-		reg = <1>;
-		#trigger-source-cells = <0>;
+&partitions {
+	partition@0 {
+		label = "u-boot";
+		reg = <0x000000 0x050000>;
+		read-only;
 	};
-};
-
-&usb2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
 
-	usb_echi_port: port@1 {
-		reg = <1>;
-		#trigger-source-cells = <0>;
+	partition@50000 {
+		label = "u-boot-env";
+		reg = <0x050000 0x020000>;
+		read-only;
 	};
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&uart {
-	status = "okay";
-};
-
-&spi {
-	status = "okay";
-	num-cs = <1>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <25000000>;
 
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x000000 0x050000>;
-				read-only;
-			};
-
-			partition@1 {
-				label = "u-boot-env";
-				reg = <0x050000 0x020000>;
-				read-only;
-			};
-
-			partition@2 {
-				label = "firmware";
-				reg = <0x070000 0xf80000>;
-			};
-
-			art: partition@3 {
-				label = "art";
-				reg = <0xff0000 0x010000>;
-				read-only;
-			};
-		};
+	partition@70000 {
+		label = "firmware";
+		reg = <0x070000 0xf80000>;
 	};
-};
-
-&eth0 {
-	status = "okay";
 
-	pll-data = <0x11110000 0x00001099 0x00991099>;
-
-	mtd-mac-address = <&art 0x00>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
+	art: partition@ff0000 {
+		label = "art";
+		reg = <0xff0000 0x010000>;
+		read-only;
 	};
 };
 
-&eth1 {
-	status = "okay";
-
-	pll-data = <0x11110000 0x00001099 0x00991099>;
-
-	mtd-mac-address = <&art 0x06>;
-
-	phy-handle = <&phy4>;
-};