diff options
Diffstat (limited to 'target/linux/ath79/dts/ar7100.dtsi')
| -rw-r--r-- | target/linux/ath79/dts/ar7100.dtsi | 204 |
1 files changed, 0 insertions, 204 deletions
diff --git a/target/linux/ath79/dts/ar7100.dtsi b/target/linux/ath79/dts/ar7100.dtsi deleted file mode 100644 index 9957b8df60..0000000000 --- a/target/linux/ath79/dts/ar7100.dtsi +++ /dev/null @@ -1,204 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include <dt-bindings/clock/ath79-clk.h> -#include "ath79.dtsi" - -/ { - compatible = "qca,ar7100"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "mips,mips24Kc"; - clocks = <&pll ATH79_CLK_CPU>; - reg = <0>; - }; - }; - - ahb { - apb { - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar7100-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - uart: uart@18020000 { - compatible = "ns16550a"; - reg = <0x18020000 0x20>; - interrupts = <3>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "uart"; - - reg-io-width = <4>; - reg-shift = <2>; - no-loopback-test; - - status = "disabled"; - }; - - usb_phy: usb-phy@18030000 { - compatible = "qca,ar7100-usb-phy"; - reg = <0x18030000 0x10>; - - reset-names = "usb-phy", "usb-host", "usb-ohci-dll"; - resets = <&rst 4>, <&rst 5>, <&rst 6>; - - #phy-cells = <0>; - - status = "disabled"; - }; - - gpio: gpio@18040000 { - compatible = "qca,ar7100-gpio"; - reg = <0x18040000 0x30>; - interrupts = <2>; - - ngpios = <16>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pll: pll-controller@18050000 { - compatible = "qca,ar7100-pll", "syscon"; - reg = <0x18050000 0x20>; - - clock-names = "ref"; - /* The board must provides the ref clock */ - - #clock-cells = <1>; - clock-output-names = "cpu", "ddr", "ahb"; - }; - - wdt: wdt@18060008 { - compatible = "qca,ar7130-wdt"; - reg = <0x18060008 0x8>; - - interrupts = <4>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "wdt"; - }; - - - rst: reset-controller@18060024 { - compatible = "qca,ar7100-reset"; - reg = <0x18060024 0x4>; - - #reset-cells = <1>; - }; - - pcie0: pcie-controller@180c0000 { - compatible = "qca,ar7100-pci"; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x0 0x0>; - reg = <0x17010000 0x100>; - reg-names = "cfg_base"; - ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000 /* pci memory */ - 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */ - interrupt-parent = <&cpuintc>; - interrupts = <2>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-map-mask = <0 0 0 1>; - interrupt-map = <0 0 0 0 &pcie0 0>; - status = "disabled"; - }; - }; - }; - - usb2: usb@1b000000 { - compatible = "generic-ehci"; - reg = <0x1b000000 0x1000>; - - interrupt-parent = <&cpuintc>; - interrupts = <3>; - - phy-names = "usb-phy"; - phys = <&usb_phy>; - - has-synopsys-hc-bug; - - status = "disabled"; - }; - - usb1: usb@1c000000 { - compatible = "generic-ohci"; - reg = <0x1c000000 0x1000>; - - interrupt-parent = <&miscintc>; - interrupts = <6>; - - phy-names = "usb-phy"; - phys = <&usb_phy>; - - status = "disabled"; - }; - - spi: spi@1f000000 { - compatible = "qca,ar7100-spi"; - reg = <0x1f000000 0x10>; - - clocks = <&pll ATH79_CLK_AHB>; - clock-names = "ahb"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; -}; - -&cpuintc { - qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; - qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, - <&ddr_ctrl 0>, <&ddr_ctrl 1>; -}; - -&miscintc { - compatible = "qca,ar7100-misc-intc"; -}; - -ð0 { - compatible = "qca,ar7100-eth"; - reg = <0x19000000 0x200 - 0x18070000 0x4>; - - pll-data = <0x00110000 0x00001099 0x00991099>; - pll-reg = <0x4 0x10 17>; - pll-handle = <&pll>; - phy-mode = "rgmii"; - - resets = <&rst 8>, <&rst 9>; - reset-names = "phy", "mac"; -}; - -&mdio1 { - builtin-switch; -}; - -ð1 { - compatible = "qca,ar7100-eth"; - reg = <0x1a000000 0x200 - 0x18070004 0x4>; - - pll-data = <0x00110000 0x00001099 0x00991099>; - pll-reg = <0x4 0x14 19>; - pll-handle = <&pll>; - - phy-mode = "rgmii"; - - resets = <&rst 12>, <&rst 13>; - reset-names = "phy", "mac"; -}; |