aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files/etc
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ath79/base-files/etc')
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom90
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata86
2 files changed, 54 insertions, 122 deletions
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 0cdd783315..5ec13efd3f 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -2,45 +2,7 @@
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-ath9k_eeprom_die() {
- echo "ath9k eeprom: " "$*"
- exit 1
-}
-
-ath9k_eeprom_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath9k_eeprom_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-ath9k_eeprom_extract_reverse() {
- local part=$1
- local offset=$2
- local count=$(($3))
- local mtd
- local reversed
- local caldata
-
- mtd=$(find_mtd_chardev "$part")
- reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
-
- for byte in $reversed; do
- caldata="\x${byte}${caldata}"
- done
-
- printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
-}
+. /lib/functions/caldata.sh
ath9k_patch_fw_mac() {
local mac=$1
@@ -83,11 +45,11 @@ case "$FIRMWARE" in
"ath9k-eeprom-ahb-18100000.wmac.bin")
case $board in
avm,fritz4020)
- ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
+ caldata_extract_reverse "urlader" 0x1541 0x440
;;
dlink,dir-825-c1|\
dlink,dir-835-a1)
- ath9k_eeprom_extract "art" 0x1000 0x440
+ caldata_extract "art" 0x1000 0x440
ath9k_patch_fw_mac $(mtd_get_mac_text "mac" 0x4) 0x2
;;
dlink,dir-842-c1|\
@@ -96,11 +58,11 @@ case "$FIRMWARE" in
dlink,dir-859-a1|\
nec,wg1200cr|\
wd,mynet-n750)
- ath9k_eeprom_extract "art" 0x1000 0x440
+ caldata_extract "art" 0x1000 0x440
ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2
;;
engenius,ecb1750)
- ath9k_eeprom_extract "art" 0x1000 0x440
+ caldata_extract "art" 0x1000 0x440
ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 0x2
;;
engenius,epg5000|\
@@ -108,39 +70,39 @@ case "$FIRMWARE" in
iodata,wn-ac1600dgr|\
iodata,wn-ac1600dgr2|\
iodata,wn-ag300dgr)
- ath9k_eeprom_extract "art" 0x1000 0x440
+ caldata_extract "art" 0x1000 0x440
ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 0x2
;;
nec,wg800hp)
- ath9k_eeprom_extract "art" 0x1000 0x440
+ caldata_extract "art" 0x1000 0x440
ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 0x2
;;
qihoo,c301)
- ath9k_eeprom_extract "radiocfg" 0x1000 0x440
+ caldata_extract "radiocfg" 0x1000 0x440
ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
"ath9k-eeprom-pci-0000:00:00.0.bin")
case $board in
avm,fritz300e)
- ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440
+ caldata_extract_reverse "urloader" 0x1541 0x440
;;
buffalo,whr-g301n|\
buffalo,wzr-hp-g302h-a1a0|\
tplink,tl-wr841-v5|\
tplink,tl-wr941-v4)
- ath9k_eeprom_extract "art" 0x1000 0xeb8
+ caldata_extract "art" 0x1000 0xeb8
;;
buffalo,wzr-hp-g450h)
- ath9k_eeprom_extract "art" 0x1000 0x440
+ caldata_extract "art" 0x1000 0x440
;;
dlink,dir-825-c1|\
dlink,dir-835-a1)
- ath9k_eeprom_extract "art" 0x5000 0x440
+ caldata_extract "art" 0x5000 0x440
ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 0x2
;;
ocedo,raccoon|\
@@ -149,7 +111,7 @@ case "$FIRMWARE" in
tplink,tl-wdr4300-v1|\
tplink,tl-wdr4900-v2|\
winchannel,wb2000)
- ath9k_eeprom_extract "art" 0x5000 0x440
+ caldata_extract "art" 0x5000 0x440
;;
netgear,wnr612-v2|\
on,n150r|\
@@ -167,24 +129,24 @@ case "$FIRMWARE" in
ubnt,bullet-m|\
ubnt,nano-m|\
ubnt,rocket-m)
- ath9k_eeprom_extract "art" 0x1000 0x1000
+ caldata_extract "art" 0x1000 0x1000
;;
pqi,air-pen)
- ath9k_eeprom_extract "art" 0x1000 0x7d2
+ caldata_extract "art" 0x1000 0x7d2
;;
ubnt,unifi)
- ath9k_eeprom_extract "art" 0x1000 0x800
+ caldata_extract "art" 0x1000 0x800
;;
wd,mynet-n750)
- ath9k_eeprom_extract "art" 0x5000 0x440
+ caldata_extract "art" 0x5000 0x440
ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 0x2
;;
wd,mynet-wifi-rangeextender)
- ath9k_eeprom_extract "art" 0x1000 0x1000
+ caldata_extract "art" 0x1000 0x1000
ath9k_patch_fw_mac $(nvram get wl0_hwaddr) "$mac" 0x2
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
@@ -195,14 +157,14 @@ case "$FIRMWARE" in
netgear,wndr3700v2|\
netgear,wndr3800|\
netgear,wndr3800ch)
- ath9k_eeprom_extract "art" 0x1000 0xeb8
+ caldata_extract "art" 0x1000 0xeb8
;;
dlink,dir-825-b1)
- ath9k_eeprom_extract "caldata" 0x1000 0xeb8
+ caldata_extract "caldata" 0x1000 0xeb8
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
@@ -213,14 +175,14 @@ case "$FIRMWARE" in
netgear,wndr3700v2|\
netgear,wndr3800|\
netgear,wndr3800ch)
- ath9k_eeprom_extract "art" 0x5000 0xeb8
+ caldata_extract "art" 0x5000 0xeb8
;;
dlink,dir-825-b1)
- ath9k_eeprom_extract "caldata" 0x5000 0xeb8
+ caldata_extract "caldata" 0x5000 0xeb8
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 3844481f5a..878f6443ab 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,35 +1,9 @@
#!/bin/sh
-. /lib/functions.sh
-. /lib/functions/k2t.sh
-
-ath10kcal_die() {
- echo "ath10cal: " "$*"
- exit 1
-}
-
-ath10kcal_from_file() {
- local source=$1
- local offset=$(($2))
- local count=$(($3))
-
- dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $source"
-}
-
-ath10kcal_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath10kcal_die "no mtd device found for partition $part"
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $mtd"
-}
+. /lib/functions/caldata.sh
+. /lib/functions/k2t.sh
ath10kcal_patch_mac() {
local mac=$1
@@ -62,10 +36,6 @@ ath10kcal_patch_mac_crc() {
}
}
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/system.sh
-
board=$(board_name)
case "$FIRMWARE" in
@@ -74,7 +44,7 @@ case "$FIRMWARE" in
comfast,cf-wr650ac-v1|\
comfast,cf-wr650ac-v2|\
yuncore,a770)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
;;
devolo,dvl1200e|\
devolo,dvl1200i|\
@@ -82,54 +52,54 @@ case "$FIRMWARE" in
devolo,dvl1750e|\
devolo,dvl1750i|\
devolo,dvl1750x)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
;;
dlink,dir-859-a1)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
;;
elecom,wrc-1750ghbk2-i)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
;;
engenius,ecb1750)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
;;
engenius,epg5000|\
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
;;
engenius,ews511ap)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
glinet,gl-ar750|\
glinet,gl-ar750s)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
;;
glinet,gl-x750)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
;;
nec,wg800hp)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880)
;;
ocedo,koala|\
ocedo,ursus)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc)
;;
openmesh,om5p-ac-v2)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
qihoo,c301)
- ath10kcal_extract "radiocfg" 0x5000 0x844
+ caldata_extract "radiocfg" 0x5000 0x844
ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
;;
tplink,archer-a7-v5|\
@@ -137,29 +107,29 @@ case "$FIRMWARE" in
tplink,archer-c7-v4|\
tplink,archer-c7-v5|\
tplink,archer-c25-v1)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
;;
tplink,archer-c5-v1|\
tplink,archer-c7-v2)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
;;
tplink,archer-d50-v1)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
;;
tplink,re350k-v1)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
;;
tplink,re355-v1|\
tplink,re450-v1)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
tplink,re450-v2)
- ath10kcal_extract "art" 0x5000 0x844
+ caldata_extract "art" 0x5000 0x844
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
;;
ubnt,unifiac-lite|\
@@ -170,14 +140,14 @@ case "$FIRMWARE" in
ubnt,nanostation-ac|\
ubnt,nanostation-ac-loco|\
ubnt,unifiac-pro)
- ath10kcal_extract "EEPROM" 0x5000 0x844
+ caldata_extract "EEPROM" 0x5000 0x844
;;
esac
;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")
case $board in
comfast,cf-e313ac)
- ath10kcal_extract "art" 0x5000 0x2f20
+ caldata_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_binary art 0x6)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
@@ -187,18 +157,18 @@ case "$FIRMWARE" in
dlink,dir-842-c2|\
dlink,dir-842-c3|\
nec,wg1200cr)
- ath10kcal_extract "art" 0x5000 0x2f20
+ caldata_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
netgear,ex6400|\
netgear,ex7300)
- ath10kcal_extract "caldata" 0x5000 0x2f20
+ caldata_extract "caldata" 0x5000 0x2f20
ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc)
;;
phicomm,k2t)
- ath10kcal_extract "art" 0x5000 0x2f20
+ caldata_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac")
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
@@ -209,7 +179,7 @@ case "$FIRMWARE" in
tplink,archer-c60-v1|\
tplink,archer-c60-v2|\
tplink,archer-c6-v2)
- ath10kcal_extract "art" 0x5000 0x2f20
+ caldata_extract "art" 0x5000 0x2f20
ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin