diff options
Diffstat (limited to 'target/linux/ath25/base-files')
4 files changed, 151 insertions, 0 deletions
diff --git a/target/linux/ath25/base-files/etc/board.d/01_leds b/target/linux/ath25/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..e6ab4a76b1 --- /dev/null +++ b/target/linux/ath25/base-files/etc/board.d/01_leds @@ -0,0 +1,13 @@ +#!/bin/sh +# Copyright 2012-2015 OpenWrt.org +# + +. /lib/functions/uci-defaults.sh + +board_config_update + +ucidef_set_led_netdev "wlan" "wlan" "wlan" "wlan0" + +board_config_flush + +exit 0 diff --git a/target/linux/ath25/base-files/etc/board.d/02_network b/target/linux/ath25/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..b2977f7b94 --- /dev/null +++ b/target/linux/ath25/base-files/etc/board.d/02_network @@ -0,0 +1,28 @@ +#!/bin/sh + +. /lib/functions/uci-defaults.sh + +board_config_update + +if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \ + -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/0:00" ] && \ + [ -x /sbin/swconfig ]; +then + ucidef_add_switch "eth0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + +elif [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ + -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; +then + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + +elif [ -d /sys/class/net/eth1 ]; then + ucidef_set_interfaces_lan_wan "eth0" "eth1" + +else + ucidef_set_interface_lan "eth0" +fi + +board_config_flush + +exit 0 diff --git a/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros b/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros new file mode 100644 index 0000000000..235ba4befc --- /dev/null +++ b/target/linux/ath25/base-files/lib/preinit/15_preinit_iface_atheros @@ -0,0 +1,34 @@ +# reset button only supported on ar5315+ at the moment +preinit_ip() { + if [ -z "$pi_ifname" ]; then + grep -q 'Atheros AR231[567]' /proc/cpuinfo && { + if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ + -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then + vconfig set_name_type DEV_PLUS_VID_NO_PAD + ip link set eth0 up + vconfig add eth0 1 + ifname=eth0.1 + else + ifname=eth0 + fi + pi_ifname=$ifname + } + fi + [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && { + ip addr add $pi_ip/$pi_netmask broadcast $pi_broadcast dev $pi_ifname + ip link set $pi_ifname up + } +} + + +# reset button only supported on ar5315+ at the moment + +preinit_ip_deconfig() { + if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \ + -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then + vconfig rem eth0.1 2>/dev/null + ip link set $pi_ifname down + elif [ -n "$pi_ifname" ]; then + ip -4 addr flush dev $pi_ifname + fi +} diff --git a/target/linux/ath25/base-files/lib/upgrade/platform.sh b/target/linux/ath25/base-files/lib/upgrade/platform.sh new file mode 100644 index 0000000000..778bbf5a39 --- /dev/null +++ b/target/linux/ath25/base-files/lib/upgrade/platform.sh @@ -0,0 +1,76 @@ +CI_BLKSZ=65536 +CI_LDADR=0x80041000 + +platform_find_partitions() { + local first dev size erasesize name + while read dev size erasesize name; do + name=${name#'"'}; name=${name%'"'} + case "$name" in + vmlinux.bin.l7|kernel|linux|rootfs) + if [ -z "$first" ]; then + first="$name" + else + echo "$erasesize:$first:$name" + break + fi + ;; + esac + done < /proc/mtd +} + +platform_find_kernelpart() { + local part + for part in "${1%:*}" "${1#*:}"; do + case "$part" in + vmlinux.bin.l7|kernel|linux) + echo "$part" + break + ;; + esac + done +} + +platform_check_image() { + [ "$#" -gt 1 ] && return 1 + + case "$(get_magic_word "$1")" in + # Combined Image + 4349) + local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null) + local md5_chk=$(dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}" + + if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then + return 0 + else + echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)" + return 1 + fi + ;; + *) + echo "Invalid image. Use combined .img files on this platform" + return 1 + ;; + esac +} + +platform_do_upgrade() { + local partitions=$(platform_find_partitions) + local kernelpart=$(platform_find_kernelpart "${partitions#*:}") + local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}" + local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null) + local kern_blocks=$(($kern_length / $CI_BLKSZ)) + local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ)) + + if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \ + [ ${kern_blocks:-0} -gt 0 ] && \ + [ ${root_blocks:-0} -gt ${kern_blocks:-0} ] && \ + [ ${erase_size:-0} -gt 0 ]; + then + local append="" + [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP" + + ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \ + dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \ + mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions + fi +} |