aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/at91/patches-2.6.21/008-fdl-serial.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/at91/patches-2.6.21/008-fdl-serial.patch')
-rw-r--r--target/linux/at91/patches-2.6.21/008-fdl-serial.patch160
1 files changed, 160 insertions, 0 deletions
diff --git a/target/linux/at91/patches-2.6.21/008-fdl-serial.patch b/target/linux/at91/patches-2.6.21/008-fdl-serial.patch
new file mode 100644
index 0000000000..42589197be
--- /dev/null
+++ b/target/linux/at91/patches-2.6.21/008-fdl-serial.patch
@@ -0,0 +1,160 @@
+--- linux-2.6.21.1.orig/drivers/serial/atmel_serial.c 2007-05-28 12:22:29.000000000 +0200
++++ linux-2.6.21.1/drivers/serial/atmel_serial.c 2007-05-28 16:39:09.000000000 +0200
+@@ -174,7 +174,35 @@
+ at91_set_gpio_value(AT91_PIN_PA21, 0);
+ else
+ at91_set_gpio_value(AT91_PIN_PA21, 1);
++
++ /*
++ * FDL VersaLink adds GPIOS to provide full modem control on
++ * USART 0 - Drive DTR and RI pins manually
++ */
++ if (mctrl & TIOCM_DTR)
++ at91_set_gpio_value(AT91_PIN_PB6, 0);
++ else
++ at91_set_gpio_value(AT91_PIN_PB6, 1);
++ if (mctrl & TIOCM_RI)
++ at91_set_gpio_value(AT91_PIN_PB7, 0);
++ else
++ at91_set_gpio_value(AT91_PIN_PB7, 1);
+ }
++
++ /*
++ * FDL VersaLink adds GPIOS to provide full modem control on
++ * USART 3 - Drive DTR and RI pins manually
++ */
++ if (port->mapbase == AT91RM9200_BASE_US3) {
++ if (mctrl & TIOCM_DTR)
++ at91_set_gpio_value(AT91_PIN_PB29, 0);
++ else
++ at91_set_gpio_value(AT91_PIN_PB29, 1);
++ if (mctrl & TIOCM_RI)
++ at91_set_gpio_value(AT91_PIN_PB2, 0);
++ else
++ at91_set_gpio_value(AT91_PIN_PB2, 1);
++ }
+ }
+ #endif
+
+@@ -211,8 +239,10 @@
+ /*
+ * The control signals are active low.
+ */
+- if (!(status & ATMEL_US_DCD))
+- ret |= TIOCM_CD;
++
++ if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
++ if (!(status & ATMEL_US_DCD))
++ ret |= TIOCM_CD;
+ if (!(status & ATMEL_US_CTS))
+ ret |= TIOCM_CTS;
+ if (!(status & ATMEL_US_DSR))
+@@ -220,6 +250,16 @@
+ if (!(status & ATMEL_US_RI))
+ ret |= TIOCM_RI;
+
++ /*
++ * Read the GPIO's for the FDL VersaLink special case
++ */
++ if (port->mapbase == AT91RM9200_BASE_US0)
++ if (!(at91_get_gpio_value(AT91_PIN_PA19)))
++ ret |= TIOCM_CD;
++ if (port->mapbase == AT91RM9200_BASE_US3)
++ if (!(at91_get_gpio_value(AT91_PIN_PA24)))
++ ret |= TIOCM_CD;
++
+ return ret;
+ }
+
+@@ -511,6 +551,34 @@
+ }
+
+ /*
++ * USART0 DCD Interrupt handler
++ */
++
++static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id)
++{
++ struct uart_port *port = dev_id;
++ int status = at91_get_gpio_value(irq);
++
++ uart_handle_dcd_change(port, !(status));
++
++ return IRQ_HANDLED;
++}
++
++/*
++ * USART3 DCD Interrupt handler
++ */
++
++static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id)
++{
++ struct uart_port *port = dev_id;
++ int status = at91_get_gpio_value(irq);
++
++ uart_handle_dcd_change(port, !(status));
++
++ return IRQ_HANDLED;
++}
++
++/*
+ * Interrupt handler
+ */
+ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
+@@ -587,6 +655,23 @@
+ return retval;
+ }
+
++ if (port->mapbase == AT91RM9200_BASE_US0) {
++ retval = request_irq(AT91_PIN_PA19, atmel_u0_DCD_interrupt, 0, "atmel_serial", port);
++ if (retval) {
++ printk("atmel_serial: atmel_startup - Can't get u0DCD irq\n");
++ free_irq(port->irq, port);
++ return retval;
++ }
++ }
++ if (port->mapbase == AT91RM9200_BASE_US3) {
++ retval = request_irq(AT91_PIN_PA24, atmel_u3_DCD_interrupt, 0, "atmel_serial", port);
++ if (retval) {
++ printk("atmel_serial: atmel_startup - Can't get u3DCD irq\n");
++ free_irq(port->irq, port);
++ return retval;
++ }
++ }
++
+ /*
+ * Initialize DMA (if necessary)
+ */
+@@ -603,6 +688,10 @@
+ kfree(atmel_port->pdc_rx[0].buf);
+ }
+ free_irq(port->irq, port);
++ if (port->mapbase == AT91RM9200_BASE_US0)
++ free_irq(AT91_PIN_PA19, port);
++ if (port->mapbase == AT91RM9200_BASE_US3)
++ free_irq(AT91_PIN_PA24, port);
+ return -ENOMEM;
+ }
+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
+@@ -636,6 +725,10 @@
+ retval = atmel_open_hook(port);
+ if (retval) {
+ free_irq(port->irq, port);
++ if (port->mapbase == AT91RM9200_BASE_US0)
++ free_irq(AT91_PIN_PA19, port);
++ if (port->mapbase == AT91RM9200_BASE_US3)
++ free_irq(AT91_PIN_PA24, port);
+ return retval;
+ }
+ }
+@@ -701,6 +794,10 @@
+ * Free the interrupt
+ */
+ free_irq(port->irq, port);
++ if (port->mapbase == AT91RM9200_BASE_US0)
++ free_irq(AT91_PIN_PA19, port);
++ if (port->mapbase == AT91RM9200_BASE_US3)
++ free_irq(AT91_PIN_PA24, port);
+
+ /*
+ * If there is a specific "close" function (to unregister