diff options
Diffstat (limited to 'target/linux/at91-2.6')
| -rw-r--r-- | target/linux/at91-2.6/patches/008-fdl-serial.patch | 146 | ||||
| -rw-r--r-- | target/linux/at91-2.6/patches/009-fdl-uartinit.patch | 49 |
2 files changed, 91 insertions, 104 deletions
diff --git a/target/linux/at91-2.6/patches/008-fdl-serial.patch b/target/linux/at91-2.6/patches/008-fdl-serial.patch index cac6744d4c..42589197be 100644 --- a/target/linux/at91-2.6/patches/008-fdl-serial.patch +++ b/target/linux/at91-2.6/patches/008-fdl-serial.patch @@ -1,75 +1,72 @@ ---- linux-2.6.19.2.old/drivers/serial/atmel_serial.c 2007-05-01 13:08:03.000000000 +0200 -+++ linux-2.6.19.2/drivers/serial/atmel_serial.c 2007-05-09 17:13:34.000000000 +0200 -@@ -173,6 +173,34 @@ +--- linux-2.6.21.1.orig/drivers/serial/atmel_serial.c 2007-05-28 12:22:29.000000000 +0200 ++++ linux-2.6.21.1/drivers/serial/atmel_serial.c 2007-05-28 16:39:09.000000000 +0200 +@@ -174,7 +174,35 @@ at91_set_gpio_value(AT91_PIN_PA21, 0); else at91_set_gpio_value(AT91_PIN_PA21, 1); + -+ /* -+ * FDL VersaLink adds GPIOS to provide full modem control on -+ * USART 0 - Drive DTR and RI pins manually -+ */ -+ if (mctrl & TIOCM_DTR) -+ at91_set_gpio_value(AT91_PIN_PB6, 0); -+ else -+ at91_set_gpio_value(AT91_PIN_PB6, 1); -+ if (mctrl & TIOCM_RI) -+ at91_set_gpio_value(AT91_PIN_PB7, 0); -+ else -+ at91_set_gpio_value(AT91_PIN_PB7, 1); -+ } -+ -+ /* -+ * FDL VersaLink adds GPIOS to provide full modem control on -+ * USART 3 - Drive DTR and RI pins manually -+ */ -+ if (port->mapbase == AT91RM9200_BASE_US3) { -+ if (mctrl & TIOCM_DTR) -+ at91_set_gpio_value(AT91_PIN_PB29, 0); -+ else -+ at91_set_gpio_value(AT91_PIN_PB29, 1); -+ if (mctrl & TIOCM_RI) -+ at91_set_gpio_value(AT91_PIN_PB2, 0); -+ else -+ at91_set_gpio_value(AT91_PIN_PB2, 1); ++ /* ++ * FDL VersaLink adds GPIOS to provide full modem control on ++ * USART 0 - Drive DTR and RI pins manually ++ */ ++ if (mctrl & TIOCM_DTR) ++ at91_set_gpio_value(AT91_PIN_PB6, 0); ++ else ++ at91_set_gpio_value(AT91_PIN_PB6, 1); ++ if (mctrl & TIOCM_RI) ++ at91_set_gpio_value(AT91_PIN_PB7, 0); ++ else ++ at91_set_gpio_value(AT91_PIN_PB7, 1); } ++ ++ /* ++ * FDL VersaLink adds GPIOS to provide full modem control on ++ * USART 3 - Drive DTR and RI pins manually ++ */ ++ if (port->mapbase == AT91RM9200_BASE_US3) { ++ if (mctrl & TIOCM_DTR) ++ at91_set_gpio_value(AT91_PIN_PB29, 0); ++ else ++ at91_set_gpio_value(AT91_PIN_PB29, 1); ++ if (mctrl & TIOCM_RI) ++ at91_set_gpio_value(AT91_PIN_PB2, 0); ++ else ++ at91_set_gpio_value(AT91_PIN_PB2, 1); ++ } } #endif -@@ -210,8 +238,14 @@ + +@@ -211,8 +239,10 @@ /* * The control signals are active low. */ - if (!(status & ATMEL_US_DCD)) - ret |= TIOCM_CD; + -+ /* -+ * Ignore DCD reister for USARTS 0 and 3 as FDL Versalink uses -+ * GPIO's for these signals -+ */ -+ if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3)) ++ if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3)) + if (!(status & ATMEL_US_DCD)) + ret |= TIOCM_CD; if (!(status & ATMEL_US_CTS)) ret |= TIOCM_CTS; if (!(status & ATMEL_US_DSR)) -@@ -219,6 +253,16 @@ +@@ -220,6 +250,16 @@ if (!(status & ATMEL_US_RI)) ret |= TIOCM_RI; -+ /* -+ * Read the GPIO's for the FDL VersaLink special case -+ */ -+ if (port->mapbase == AT91RM9200_BASE_US0) -+ if (!(at91_get_gpio_value(AT91_PIN_PA19))) -+ ret |= TIOCM_CD; -+ if (port->mapbase == AT91RM9200_BASE_US3) -+ if (!(at91_get_gpio_value(AT91_PIN_PA24))) -+ ret |= TIOCM_CD; ++ /* ++ * Read the GPIO's for the FDL VersaLink special case ++ */ ++ if (port->mapbase == AT91RM9200_BASE_US0) ++ if (!(at91_get_gpio_value(AT91_PIN_PA19))) ++ ret |= TIOCM_CD; ++ if (port->mapbase == AT91RM9200_BASE_US3) ++ if (!(at91_get_gpio_value(AT91_PIN_PA24))) ++ ret |= TIOCM_CD; + return ret; } -@@ -510,6 +554,34 @@ +@@ -511,6 +551,34 @@ } /* @@ -78,12 +75,12 @@ + +static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id) +{ -+ struct uart_port *port = dev_id; -+ int status = at91_get_gpio_value(irq); -+ -+ uart_handle_dcd_change(port, !(status)); ++ struct uart_port *port = dev_id; ++ int status = at91_get_gpio_value(irq); ++ ++ uart_handle_dcd_change(port, !(status)); + -+ return IRQ_HANDLED; ++ return IRQ_HANDLED; +} + +/* @@ -92,19 +89,19 @@ + +static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id) +{ -+ struct uart_port *port = dev_id; -+ int status = at91_get_gpio_value(irq); -+ -+ uart_handle_dcd_change(port, !(status)); ++ struct uart_port *port = dev_id; ++ int status = at91_get_gpio_value(irq); ++ ++ uart_handle_dcd_change(port, !(status)); + -+ return IRQ_HANDLED; ++ return IRQ_HANDLED; +} + +/* * Interrupt handler */ static irqreturn_t atmel_interrupt(int irq, void *dev_id) -@@ -586,6 +658,24 @@ +@@ -587,6 +655,23 @@ return retval; } @@ -125,40 +122,39 @@ + } + } + -+ - /* + /* * Initialize DMA (if necessary) */ -@@ -602,6 +692,10 @@ +@@ -603,6 +688,10 @@ kfree(atmel_port->pdc_rx[0].buf); } free_irq(port->irq, port); -+ if (port->mapbase == AT91RM9200_BASE_US0) -+ free_irq(AT91_PIN_PA19, port); -+ if (port->mapbase == AT91RM9200_BASE_US3) -+ free_irq(AT91_PIN_PA24, port); ++ if (port->mapbase == AT91RM9200_BASE_US0) ++ free_irq(AT91_PIN_PA19, port); ++ if (port->mapbase == AT91RM9200_BASE_US3) ++ free_irq(AT91_PIN_PA24, port); return -ENOMEM; } pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE); -@@ -635,6 +729,10 @@ +@@ -636,6 +725,10 @@ retval = atmel_open_hook(port); if (retval) { free_irq(port->irq, port); -+ if (port->mapbase == AT91RM9200_BASE_US0) -+ free_irq(AT91_PIN_PA19, port); -+ if (port->mapbase == AT91RM9200_BASE_US3) -+ free_irq(AT91_PIN_PA24, port); ++ if (port->mapbase == AT91RM9200_BASE_US0) ++ free_irq(AT91_PIN_PA19, port); ++ if (port->mapbase == AT91RM9200_BASE_US3) ++ free_irq(AT91_PIN_PA24, port); return retval; } } -@@ -694,6 +792,10 @@ +@@ -701,6 +794,10 @@ * Free the interrupt */ free_irq(port->irq, port); -+ if (port->mapbase == AT91RM9200_BASE_US0) -+ free_irq(AT91_PIN_PA19, port); -+ if (port->mapbase == AT91RM9200_BASE_US3) -+ free_irq(AT91_PIN_PA24, port); ++ if (port->mapbase == AT91RM9200_BASE_US0) ++ free_irq(AT91_PIN_PA19, port); ++ if (port->mapbase == AT91RM9200_BASE_US3) ++ free_irq(AT91_PIN_PA24, port); /* * If there is a specific "close" function (to unregister diff --git a/target/linux/at91-2.6/patches/009-fdl-uartinit.patch b/target/linux/at91-2.6/patches/009-fdl-uartinit.patch index 26d79865b0..f2491f3496 100644 --- a/target/linux/at91-2.6/patches/009-fdl-uartinit.patch +++ b/target/linux/at91-2.6/patches/009-fdl-uartinit.patch @@ -1,43 +1,34 @@ -diff -urN linux-2.6.19.2.old/arch/arm/mach-at91rm9200/at91rm9200_devices.c linux-2.6.19.2/arch/arm/mach-at91rm9200/at91rm9200_devices.c ---- linux-2.6.19.2.old/arch/arm/mach-at91rm9200/at91rm9200_devices.c 2007-05-01 13:08:02.000000000 +0200 -+++ linux-2.6.19.2/arch/arm/mach-at91rm9200/at91rm9200_devices.c 2007-05-09 12:59:58.000000000 +0200 -@@ -709,6 +709,10 @@ +--- linux-2.6.21.1.orig/arch/arm/mach-at91/at91rm9200_devices.c 2007-05-28 12:22:29.000000000 +0200 ++++ linux-2.6.21.1/arch/arm/mach-at91/at91rm9200_devices.c 2007-05-28 16:44:36.000000000 +0200 +@@ -618,7 +618,6 @@ + + + #if defined(CONFIG_NEW_LEDS) +- + static struct platform_device at91_leds = { + .name = "at91_leds", + .id = -1, +@@ -724,6 +723,10 @@ * We need to drive the pin manually. Default is off (RTS is active low). */ at91_set_gpio_output(AT91_PIN_PA21, 1); -+ at91_set_gpio_output(AT91_PIN_PB6, 1); /* DTR0 */ -+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* RI0 */ -+ at91_set_gpio_input(AT91_PIN_PA19, 1); /* DCD0 */ ++ at91_set_gpio_output(AT91_PIN_PB6, 1); /* DTR0 */ ++ at91_set_gpio_output(AT91_PIN_PB7, 1); /* RI0 */ ++ at91_set_gpio_input(AT91_PIN_PA19, 1); /* DCD0 */ + at91_set_deglitch(AT91_PIN_PA19, 1); } static struct resource uart1_resources[] = { -@@ -820,6 +824,12 @@ +@@ -835,6 +838,12 @@ { at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ -+ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ -+ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */ -+ at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */ -+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* RI0 */ -+ at91_set_gpio_input(AT91_PIN_PA24, 1); /* DCD0 */ ++ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ ++ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */ ++ at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */ ++ at91_set_gpio_output(AT91_PIN_PB2, 1); /* RI0 */ ++ at91_set_gpio_input(AT91_PIN_PA24, 1); /* DCD0 */ + at91_set_deglitch(AT91_PIN_PA24, 1); } struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -diff -urN linux-2.6.19.2.old/arch/arm/mach-at91rm9200/vlink_leds.c linux-2.6.19.2/arch/arm/mach-at91rm9200/vlink_leds.c ---- linux-2.6.19.2.old/arch/arm/mach-at91rm9200/vlink_leds.c 2007-05-01 13:08:03.000000000 +0200 -+++ linux-2.6.19.2/arch/arm/mach-at91rm9200/vlink_leds.c 2007-05-09 12:58:42.000000000 +0200 -@@ -114,12 +114,6 @@ - - at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT - at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND -- at91_set_gpio_input(AT91_PIN_PA19, 1); // P1DTR -- at91_set_gpio_input(AT91_PIN_PA24, 1); // P2DTR -- at91_set_gpio_output(AT91_PIN_PB29, 1); // P2DCD -- at91_set_gpio_output(AT91_PIN_PB2, 1); // P2RI -- at91_set_gpio_output(AT91_PIN_PB6, 1); // P1DCD -- at91_set_gpio_output(AT91_PIN_PB7, 1); // P1RI - - at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX - at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP |