aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar7
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar7')
l---------target/linux/ar7/files/arch/mips/include/asm/ar71
-rw-r--r--target/linux/ar7/patches-2.6.30/100-board_support.patch86
-rw-r--r--target/linux/ar7/patches-2.6.30/110-flash.patch11
-rw-r--r--target/linux/ar7/patches-2.6.30/120-gpio_chrdev.patch28
-rw-r--r--target/linux/ar7/patches-2.6.30/130-vlynq.patch20
-rw-r--r--target/linux/ar7/patches-2.6.30/131-vlynq_fixes.patch548
-rw-r--r--target/linux/ar7/patches-2.6.30/150-cpmac_not_broken.patch11
-rw-r--r--target/linux/ar7/patches-2.6.30/500-serial_kludge.patch38
-rw-r--r--target/linux/ar7/patches-2.6.30/900-cpmac_multiqueue.patch70
9 files changed, 813 insertions, 0 deletions
diff --git a/target/linux/ar7/files/arch/mips/include/asm/ar7 b/target/linux/ar7/files/arch/mips/include/asm/ar7
new file mode 120000
index 0000000000..4de8fbc8bc
--- /dev/null
+++ b/target/linux/ar7/files/arch/mips/include/asm/ar7
@@ -0,0 +1 @@
+../../../../include/asm-mips/ar7 \ No newline at end of file
diff --git a/target/linux/ar7/patches-2.6.30/100-board_support.patch b/target/linux/ar7/patches-2.6.30/100-board_support.patch
new file mode 100644
index 0000000000..c3fad1653a
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.30/100-board_support.patch
@@ -0,0 +1,86 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -19,6 +19,24 @@ choice
+ prompt "System type"
+ default SGI_IP22
+
++config AR7
++ bool "Texas Instruments AR7"
++ select BOOT_ELF32
++ select DMA_NONCOHERENT
++ select CEVT_R4K
++ select CSRC_R4K
++ select IRQ_CPU
++ select NO_EXCEPT_FILL
++ select SWAP_IO_SPACE
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_HAS_EARLY_PRINTK
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_SUPPORTS_KGDB
++ select SYS_SUPPORTS_LITTLE_ENDIAN
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select GENERIC_GPIO
++ select GENERIC_HARDIRQS_NO__DO_IRQ
++
+ config MACH_ALCHEMY
+ bool "Alchemy processor based machines"
+
+--- a/arch/mips/kernel/traps.c
++++ b/arch/mips/kernel/traps.c
+@@ -1203,9 +1203,22 @@ void *set_except_vector(int n, void *add
+
+ exception_handlers[n] = handler;
+ if (n == 0 && cpu_has_divec) {
+- *(u32 *)(ebase + 0x200) = 0x08000000 |
+- (0x03ffffff & (handler >> 2));
+- local_flush_icache_range(ebase + 0x200, ebase + 0x204);
++ if ((handler ^ (ebase + 4)) & 0xfc000000) {
++ /* lui k0, 0x0000 */
++ *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16);
++ /* ori k0, 0x0000 */
++ *(u32 *)(ebase + 0x204) =
++ 0x375a0000 | (handler & 0xffff);
++ /* jr k0 */
++ *(u32 *)(ebase + 0x208) = 0x03400008;
++ /* nop */
++ *(u32 *)(ebase + 0x20C) = 0x00000000;
++ flush_icache_range(ebase + 0x200, ebase + 0x210);
++ } else {
++ *(u32 *)(ebase + 0x200) =
++ 0x08000000 | (0x03ffffff & (handler >> 2));
++ flush_icache_range(ebase + 0x200, ebase + 0x204);
++ }
+ }
+ return (void *)old_handler;
+ }
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -167,6 +167,13 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/s
+ #
+
+ #
++# Texas Instruments AR7
++#
++core-$(CONFIG_AR7) += arch/mips/ar7/
++cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7
++load-$(CONFIG_AR7) += 0xffffffff94100000
++
++#
+ # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
+ #
+ core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
+--- a/arch/mips/include/asm/page.h
++++ b/arch/mips/include/asm/page.h
+@@ -182,8 +182,10 @@ typedef struct { unsigned long pgprot; }
+ #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+-#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE)
+-#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET)
++#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \
++ PHYS_OFFSET)
++#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \
++ PHYS_OFFSET)
+
+ #include <asm-generic/memory_model.h>
+ #include <asm-generic/page.h>
diff --git a/target/linux/ar7/patches-2.6.30/110-flash.patch b/target/linux/ar7/patches-2.6.30/110-flash.patch
new file mode 100644
index 0000000000..7311a67349
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.30/110-flash.patch
@@ -0,0 +1,11 @@
+--- a/drivers/mtd/maps/physmap.c
++++ b/drivers/mtd/maps/physmap.c
+@@ -80,7 +80,7 @@ static const char *rom_probe_types[] = {
+ "map_rom",
+ NULL };
+ #ifdef CONFIG_MTD_PARTITIONS
+-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
++static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL };
+ #endif
+
+ static int physmap_flash_probe(struct platform_device *dev)
diff --git a/target/linux/ar7/patches-2.6.30/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.30/120-gpio_chrdev.patch
new file mode 100644
index 0000000000..fa61e5ccf5
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.30/120-gpio_chrdev.patch
@@ -0,0 +1,28 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -974,6 +974,15 @@ config MWAVE
+ To compile this driver as a module, choose M here: the
+ module will be called mwave.
+
++config AR7_GPIO
++ tristate "TI AR7 GPIO Support"
++ depends on AR7
++ help
++ Give userspace access to the GPIO pins on the Texas Instruments AR7
++ processors.
++
++ If compiled as a module, it will be called ar7_gpio.
++
+ config SCx200_GPIO
+ tristate "NatSemi SCx200 GPIO Support"
+ depends on SCx200
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -90,6 +90,7 @@ obj-$(CONFIG_HW_RANDOM) += hw_random/
+ obj-$(CONFIG_PPDEV) += ppdev.o
+ obj-$(CONFIG_NWBUTTON) += nwbutton.o
+ obj-$(CONFIG_NWFLASH) += nwflash.o
++obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
+ obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
+ obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
diff --git a/target/linux/ar7/patches-2.6.30/130-vlynq.patch b/target/linux/ar7/patches-2.6.30/130-vlynq.patch
new file mode 100644
index 0000000000..9ab3638eaa
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.30/130-vlynq.patch
@@ -0,0 +1,20 @@
+--- a/drivers/Kconfig
++++ b/drivers/Kconfig
+@@ -100,5 +100,7 @@ source "drivers/auxdisplay/Kconfig"
+
+ source "drivers/uio/Kconfig"
+
++source "drivers/vlynq/Kconfig"
++
+ source "drivers/xen/Kconfig"
+ endmenu
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -96,6 +96,7 @@ obj-$(CONFIG_DCA) += dca/
+ obj-$(CONFIG_HID) += hid/
+ obj-$(CONFIG_PPC_PS3) += ps3/
+ obj-$(CONFIG_OF) += of/
++obj-$(CONFIG_VLYNQ) += vlynq/
+ obj-$(CONFIG_SSB) += ssb/
+ obj-$(CONFIG_VIRTIO) += virtio/
+ obj-$(CONFIG_REGULATOR) += regulator/
diff --git a/target/linux/ar7/patches-2.6.30/131-vlynq_fixes.patch b/target/linux/ar7/patches-2.6.30/131-vlynq_fixes.patch
new file mode 100644
index 0000000000..f68ae4c70e
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.30/131-vlynq_fixes.patch
@@ -0,0 +1,548 @@
+--- a/drivers/vlynq/vlynq.c 2009-05-31 20:41:57.000000000 +0200
++++ b/drivers/vlynq/vlynq.c 2009-07-28 21:27:52.000000000 +0200
+@@ -14,6 +14,9 @@
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
++ *
++ * Parts of the VLYNQ specification can be found here:
++ * http://www.ti.com/litv/pdf/sprue36a
+ */
+
+ #include <linux/init.h>
+@@ -25,7 +28,6 @@
+ #include <linux/errno.h>
+ #include <linux/platform_device.h>
+ #include <linux/interrupt.h>
+-#include <linux/device.h>
+ #include <linux/delay.h>
+ #include <linux/io.h>
+
+@@ -73,15 +75,11 @@
+ u32 int_device[8];
+ };
+
+-#define vlynq_reg_read(reg) readl(&(reg))
+-#define vlynq_reg_write(reg, val) writel(val, &(reg))
+-
+-static int __vlynq_enable_device(struct vlynq_device *dev);
+-
+-#ifdef VLYNQ_DEBUG
++#ifdef CONFIG_VLYNQ_DEBUG
+ static void vlynq_dump_regs(struct vlynq_device *dev)
+ {
+ int i;
++
+ printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n",
+ dev->local, dev->remote);
+ for (i = 0; i < 32; i++) {
+@@ -95,20 +93,23 @@
+ static void vlynq_dump_mem(u32 *base, int count)
+ {
+ int i;
++
+ for (i = 0; i < (count + 3) / 4; i++) {
+- if (i % 4 == 0) printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
++ if (i % 4 == 0)
++ printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
+ printk(KERN_DEBUG " 0x%08x", *(base + i));
+ }
+ printk(KERN_DEBUG "\n");
+ }
+ #endif
+
+-int vlynq_linked(struct vlynq_device *dev)
++/* Check the VLYNQ link status with a given device */
++static int vlynq_linked(struct vlynq_device *dev)
+ {
+ int i;
+
+ for (i = 0; i < 100; i++)
+- if (vlynq_reg_read(dev->local->status) & VLYNQ_STATUS_LINK)
++ if (readl(&dev->local->status) & VLYNQ_STATUS_LINK)
+ return 1;
+ else
+ cpu_relax();
+@@ -118,17 +119,15 @@
+
+ static void vlynq_reset(struct vlynq_device *dev)
+ {
+- vlynq_reg_write(dev->local->control,
+- vlynq_reg_read(dev->local->control) |
+- VLYNQ_CTRL_RESET);
++ writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
++ &dev->local->control);
+
+ /* Wait for the devices to finish resetting */
+ msleep(5);
+
+ /* Remove reset bit */
+- vlynq_reg_write(dev->local->control,
+- vlynq_reg_read(dev->local->control) &
+- ~VLYNQ_CTRL_RESET);
++ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
++ &dev->local->control);
+
+ /* Give some time for the devices to settle */
+ msleep(5);
+@@ -142,9 +141,9 @@
+
+ BUG_ON(!dev);
+ virq = irq - dev->irq_start;
+- val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
++ val = readl(&dev->remote->int_device[virq >> 2]);
+ val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq);
+- vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
++ writel(val, &dev->remote->int_device[virq >> 2]);
+ }
+
+ static void vlynq_irq_mask(unsigned int irq)
+@@ -155,9 +154,9 @@
+
+ BUG_ON(!dev);
+ virq = irq - dev->irq_start;
+- val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
++ val = readl(&dev->remote->int_device[virq >> 2]);
+ val &= ~(VINT_ENABLE << VINT_OFFSET(virq));
+- vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
++ writel(val, &dev->remote->int_device[virq >> 2]);
+ }
+
+ static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
+@@ -168,7 +167,7 @@
+
+ BUG_ON(!dev);
+ virq = irq - dev->irq_start;
+- val = vlynq_reg_read(dev->remote->int_device[virq >> 2]);
++ val = readl(&dev->remote->int_device[virq >> 2]);
+ switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_EDGE_FALLING:
+@@ -187,28 +186,30 @@
+ default:
+ return -EINVAL;
+ }
+- vlynq_reg_write(dev->remote->int_device[virq >> 2], val);
++ writel(val, &dev->remote->int_device[virq >> 2]);
+ return 0;
+ }
+
+ static void vlynq_local_ack(unsigned int irq)
+ {
+ struct vlynq_device *dev = get_irq_chip_data(irq);
+- u32 status = vlynq_reg_read(dev->local->status);
+- if (printk_ratelimit())
+- printk(KERN_DEBUG "%s: local status: 0x%08x\n",
+- dev->dev.bus_id, status);
+- vlynq_reg_write(dev->local->status, status);
++
++ u32 status = readl(&dev->local->status);
++
++ pr_debug("%s: local status: 0x%08x\n",
++ dev_name(&dev->dev), status);
++ writel(status, &dev->local->status);
+ }
+
+ static void vlynq_remote_ack(unsigned int irq)
+ {
+ struct vlynq_device *dev = get_irq_chip_data(irq);
+- u32 status = vlynq_reg_read(dev->remote->status);
+- if (printk_ratelimit())
+- printk(KERN_DEBUG "%s: remote status: 0x%08x\n",
+- dev->dev.bus_id, status);
+- vlynq_reg_write(dev->remote->status, status);
++
++ u32 status = readl(&dev->remote->status);
++
++ pr_debug("%s: remote status: 0x%08x\n",
++ dev_name(&dev->dev), status);
++ writel(status, &dev->remote->status);
+ }
+
+ static irqreturn_t vlynq_irq(int irq, void *dev_id)
+@@ -217,8 +218,8 @@
+ u32 status;
+ int virq = 0;
+
+- status = vlynq_reg_read(dev->local->int_status);
+- vlynq_reg_write(dev->local->int_status, status);
++ status = readl(&dev->local->int_status);
++ writel(status, &dev->local->int_status);
+
+ if (unlikely(!status))
+ spurious_interrupt();
+@@ -262,28 +263,28 @@
+ if (dev->local_irq == dev->remote_irq) {
+ printk(KERN_ERR
+ "%s: local vlynq irq should be different from remote\n",
+- dev->dev.bus_id);
++ dev_name(&dev->dev));
+ return -EINVAL;
+ }
+
+ /* Clear local and remote error bits */
+- vlynq_reg_write(dev->local->status, vlynq_reg_read(dev->local->status));
+- vlynq_reg_write(dev->remote->status,
+- vlynq_reg_read(dev->remote->status));
++ writel(readl(&dev->local->status), &dev->local->status);
++ writel(readl(&dev->remote->status), &dev->remote->status);
+
+ /* Now setup interrupts */
+ val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq);
+ val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL |
+ VLYNQ_CTRL_INT2CFG;
+- val |= vlynq_reg_read(dev->local->control);
+- vlynq_reg_write(dev->local->int_ptr, VLYNQ_INT_OFFSET);
+- vlynq_reg_write(dev->local->control, val);
++ val |= readl(&dev->local->control);
++ writel(VLYNQ_INT_OFFSET, &dev->local->int_ptr);
++ writel(val, &dev->local->control);
+
+ val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq);
+ val |= VLYNQ_CTRL_INT_ENABLE;
+- val |= vlynq_reg_read(dev->remote->control);
+- vlynq_reg_write(dev->remote->int_ptr, VLYNQ_INT_OFFSET);
+- vlynq_reg_write(dev->remote->control, val);
++ val |= readl(&dev->remote->control);
++ writel(VLYNQ_INT_OFFSET, &dev->remote->int_ptr);
++ writel(val, &dev->remote->int_ptr);
++ writel(val, &dev->remote->control);
+
+ for (i = dev->irq_start; i <= dev->irq_end; i++) {
+ virq = i - dev->irq_start;
+@@ -299,12 +300,13 @@
+ set_irq_chip_and_handler(i, &vlynq_irq_chip,
+ handle_simple_irq);
+ set_irq_chip_data(i, dev);
+- vlynq_reg_write(dev->remote->int_device[virq >> 2], 0);
++ writel(0, &dev->remote->int_device[virq >> 2]);
+ }
+ }
+
+ if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) {
+- printk(KERN_ERR "%s: request_irq failed\n", dev->dev.bus_id);
++ printk(KERN_ERR "%s: request_irq failed\n",
++ dev_name(&dev->dev));
+ return -EAGAIN;
+ }
+
+@@ -328,11 +330,11 @@
+ if (ids->id == vdev->dev_id) {
+ vdev->divisor = ids->divisor;
+ vlynq_set_drvdata(vdev, ids);
+- printk(KERN_INFO "Driver found for VLYNQ " \
++ printk(KERN_INFO "Driver found for VLYNQ "
+ "device: %08x\n", vdev->dev_id);
+ return 1;
+ }
+- printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver" \
++ printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver"
+ " for VLYNQ device: %08x\n", ids->id, vdev->dev_id);
+ ids++;
+ }
+@@ -346,8 +348,7 @@
+ struct vlynq_device_id *id = vlynq_get_drvdata(vdev);
+ int result = -ENODEV;
+
+- get_device(dev);
+- if (drv && drv->probe)
++ if (drv->probe)
+ result = drv->probe(vdev, id);
+ if (result)
+ put_device(dev);
+@@ -357,9 +358,10 @@
+ static int vlynq_device_remove(struct device *dev)
+ {
+ struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
+- if (drv && drv->remove)
++
++ if (drv->remove)
+ drv->remove(to_vlynq_device(dev));
+- put_device(dev);
++
+ return 0;
+ }
+
+@@ -377,6 +379,14 @@
+ }
+ EXPORT_SYMBOL(vlynq_unregister_driver);
+
++/*
++ * A VLYNQ remote device can clock the VLYNQ bus master
++ * using a dedicated clock line. In that case, both the
++ * remove device and the bus master should have the same
++ * serial clock dividers configured. Iterate through the
++ * 8 possible dividers until we actually link with the
++ * device.
++ */
+ static int __vlynq_try_remote(struct vlynq_device *dev)
+ {
+ int i;
+@@ -389,21 +399,21 @@
+ if (!vlynq_linked(dev))
+ break;
+
+- vlynq_reg_write(dev->remote->control,
+- (vlynq_reg_read(dev->remote->control) &
++ writel((readl(&dev->remote->control) &
+ ~VLYNQ_CTRL_CLOCK_MASK) |
+ VLYNQ_CTRL_CLOCK_INT |
+- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1));
+- vlynq_reg_write(dev->local->control,
+- ((vlynq_reg_read(dev->local->control)
++ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
++ &dev->remote->control);
++ writel((readl(&dev->local->control)
+ & ~(VLYNQ_CTRL_CLOCK_INT |
+ VLYNQ_CTRL_CLOCK_MASK)) |
+- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1)));
++ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
++ &dev->local->control);
+
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
+ "%s: using remote clock divisor %d\n",
+- dev->dev.bus_id, i - vlynq_rdiv1 + 1);
++ dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
+ dev->divisor = i;
+ return 0;
+ } else {
+@@ -414,26 +424,33 @@
+ return -ENODEV;
+ }
+
++/*
++ * A VLYNQ remote device can be clocked by the VLYNQ bus
++ * master using a dedicated clock line. In that case, only
++ * the bus master configures the serial clock divider.
++ * Iterate through the 8 possible dividers until we
++ * actually get a link with the device.
++ */
+ static int __vlynq_try_local(struct vlynq_device *dev)
+ {
+ int i;
+-
++
+ vlynq_reset(dev);
+
+ for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
+ i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
+ dev->dev_id ? i++ : i--) {
+
+- vlynq_reg_write(dev->local->control,
+- (vlynq_reg_read(dev->local->control) &
++ writel((readl(&dev->local->control) &
+ ~VLYNQ_CTRL_CLOCK_MASK) |
+ VLYNQ_CTRL_CLOCK_INT |
+- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1));
++ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
++ &dev->local->control);
+
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
+ "%s: using local clock divisor %d\n",
+- dev->dev.bus_id, i - vlynq_ldiv1 + 1);
++ dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
+ dev->divisor = i;
+ return 0;
+ } else {
+@@ -444,27 +461,33 @@
+ return -ENODEV;
+ }
+
++/*
++ * When using external clocking method, serial clock
++ * is supplied by an external oscillator, therefore we
++ * should mask the local clock bit in the clock control
++ * register for both the bus master and the remote device.
++ */
+ static int __vlynq_try_external(struct vlynq_device *dev)
+ {
+ vlynq_reset(dev);
+ if (!vlynq_linked(dev))
+ return -ENODEV;
+
+- vlynq_reg_write(dev->remote->control,
+- (vlynq_reg_read(dev->remote->control) &
+- ~VLYNQ_CTRL_CLOCK_INT));
+-
+- vlynq_reg_write(dev->local->control,
+- (vlynq_reg_read(dev->local->control) &
+- ~VLYNQ_CTRL_CLOCK_INT));
++ writel((readl(&dev->remote->control) &
++ ~VLYNQ_CTRL_CLOCK_INT),
++ &dev->remote->control);
++
++ writel((readl(&dev->local->control) &
++ ~VLYNQ_CTRL_CLOCK_INT),
++ &dev->local->control);
+
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG "%s: using external clock\n",
+- dev->dev.bus_id);
++ dev_name(&dev->dev));
+ dev->divisor = vlynq_div_external;
+ return 0;
+ }
+-
++
+ return -ENODEV;
+ }
+
+@@ -481,10 +504,10 @@
+ case vlynq_div_external:
+ case vlynq_div_auto:
+ /* When the device is brought from reset it should have clock
+- generation negotiated by hardware.
+- Check which device is generating clocks and perform setup
+- accordingly */
+- if (vlynq_linked(dev) && vlynq_reg_read(dev->remote->control) &
++ * generation negotiated by hardware.
++ * Check which device is generating clocks and perform setup
++ * accordingly */
++ if (vlynq_linked(dev) && readl(&dev->remote->control) &
+ VLYNQ_CTRL_CLOCK_INT) {
+ if (!__vlynq_try_remote(dev) ||
+ !__vlynq_try_local(dev) ||
+@@ -497,31 +520,43 @@
+ return 0;
+ }
+ break;
+- case vlynq_ldiv1: case vlynq_ldiv2: case vlynq_ldiv3: case vlynq_ldiv4:
+- case vlynq_ldiv5: case vlynq_ldiv6: case vlynq_ldiv7: case vlynq_ldiv8:
+- vlynq_reg_write(dev->local->control,
+- VLYNQ_CTRL_CLOCK_INT |
+- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+- vlynq_ldiv1));
+- vlynq_reg_write(dev->remote->control, 0);
++ case vlynq_ldiv1:
++ case vlynq_ldiv2:
++ case vlynq_ldiv3:
++ case vlynq_ldiv4:
++ case vlynq_ldiv5:
++ case vlynq_ldiv6:
++ case vlynq_ldiv7:
++ case vlynq_ldiv8:
++ writel(VLYNQ_CTRL_CLOCK_INT |
++ VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
++ vlynq_ldiv1), &dev->local->control);
++ writel(0, &dev->remote->control);
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
+- "%s: using local clock divisor %d\n",
+- dev->dev.bus_id, dev->divisor - vlynq_ldiv1 + 1);
++ "%s: using local clock divisor %d\n",
++ dev_name(&dev->dev),
++ dev->divisor - vlynq_ldiv1 + 1);
+ return 0;
+ }
+ break;
+- case vlynq_rdiv1: case vlynq_rdiv2: case vlynq_rdiv3: case vlynq_rdiv4:
+- case vlynq_rdiv5: case vlynq_rdiv6: case vlynq_rdiv7: case vlynq_rdiv8:
+- vlynq_reg_write(dev->local->control, 0);
+- vlynq_reg_write(dev->remote->control,
+- VLYNQ_CTRL_CLOCK_INT |
+- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
+- vlynq_rdiv1));
++ case vlynq_rdiv1:
++ case vlynq_rdiv2:
++ case vlynq_rdiv3:
++ case vlynq_rdiv4:
++ case vlynq_rdiv5:
++ case vlynq_rdiv6:
++ case vlynq_rdiv7:
++ case vlynq_rdiv8:
++ writel(0, &dev->local->control);
++ writel(VLYNQ_CTRL_CLOCK_INT |
++ VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
++ vlynq_rdiv1), &dev->remote->control);
+ if (vlynq_linked(dev)) {
+ printk(KERN_DEBUG
+- "%s: using remote clock divisor %d\n",
+- dev->dev.bus_id, dev->divisor - vlynq_rdiv1 + 1);
++ "%s: using remote clock divisor %d\n",
++ dev_name(&dev->dev),
++ dev->divisor - vlynq_rdiv1 + 1);
+ return 0;
+ }
+ break;
+@@ -568,12 +603,10 @@
+ if (!dev->enabled)
+ return -ENXIO;
+
+- vlynq_reg_write(dev->local->tx_offset, tx_offset);
++ writel(tx_offset, &dev->local->tx_offset);
+ for (i = 0; i < 4; i++) {
+- vlynq_reg_write(dev->local->rx_mapping[i].offset,
+- mapping[i].offset);
+- vlynq_reg_write(dev->local->rx_mapping[i].size,
+- mapping[i].size);
++ writel(mapping[i].offset, &dev->local->rx_mapping[i].offset);
++ writel(mapping[i].size, &dev->local->rx_mapping[i].size);
+ }
+ return 0;
+ }
+@@ -587,12 +620,10 @@
+ if (!dev->enabled)
+ return -ENXIO;
+
+- vlynq_reg_write(dev->remote->tx_offset, tx_offset);
++ writel(tx_offset, &dev->remote->tx_offset);
+ for (i = 0; i < 4; i++) {
+- vlynq_reg_write(dev->remote->rx_mapping[i].offset,
+- mapping[i].offset);
+- vlynq_reg_write(dev->remote->rx_mapping[i].size,
+- mapping[i].size);
++ writel(mapping[i].offset, &dev->remote->rx_mapping[i].offset);
++ writel(mapping[i].size, &dev->remote->rx_mapping[i].size);
+ }
+ return 0;
+ }
+@@ -662,8 +693,7 @@
+ dev->id = pdev->id;
+ dev->dev.bus = &vlynq_bus_type;
+ dev->dev.parent = &pdev->dev;
+- snprintf(dev->dev.bus_id, BUS_ID_SIZE, "vlynq%d", dev->id);
+- dev->dev.bus_id[BUS_ID_SIZE - 1] = 0;
++ dev_set_name(&dev->dev, "vlynq%d", dev->id);
+ dev->dev.platform_data = pdev->dev.platform_data;
+ dev->dev.release = vlynq_device_release;
+
+@@ -673,9 +703,9 @@
+ dev->mem_end = mem_res->end;
+
+ len = regs_res->end - regs_res->start;
+- if (!request_mem_region(regs_res->start, len, dev->dev.bus_id)) {
++ if (!request_mem_region(regs_res->start, len, dev_name(&dev->dev))) {
+ printk(KERN_ERR "%s: Can't request vlynq registers\n",
+- dev->dev.bus_id);
++ dev_name(&dev->dev));
+ result = -ENXIO;
+ goto fail_request;
+ }
+@@ -683,7 +713,7 @@
+ dev->local = ioremap(regs_res->start, len);
+ if (!dev->local) {
+ printk(KERN_ERR "%s: Can't remap vlynq registers\n",
+- dev->dev.bus_id);
++ dev_name(&dev->dev));
+ result = -ENXIO;
+ goto fail_remap;
+ }
+@@ -702,14 +732,14 @@
+ platform_set_drvdata(pdev, dev);
+
+ printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
+- dev->dev.bus_id, (void *)dev->regs_start, dev->irq,
++ dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
+ (void *)dev->mem_start);
+
+ dev->dev_id = 0;
+ dev->divisor = vlynq_div_auto;
+ result = __vlynq_enable_device(dev);
+ if (result == 0) {
+- dev->dev_id = vlynq_reg_read(dev->remote->chip);
++ dev->dev_id = readl(&dev->remote->chip);
+ ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
+ }
+ if (dev->dev_id)
diff --git a/target/linux/ar7/patches-2.6.30/150-cpmac_not_broken.patch b/target/linux/ar7/patches-2.6.30/150-cpmac_not_broken.patch
new file mode 100644
index 0000000000..0c8a20d459
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.30/150-cpmac_not_broken.patch
@@ -0,0 +1,11 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -1883,7 +1883,7 @@ config SC92031
+
+ config CPMAC
+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
+- depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
++ depends on NET_ETHERNET && EXPERIMENTAL && AR7
+ select PHYLIB
+ help
+ TI AR7 CPMAC Ethernet support
diff --git a/target/linux/ar7/patches-2.6.30/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.30/500-serial_kludge.patch
new file mode 100644
index 0000000000..d4b02bc913
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.30/500-serial_kludge.patch
@@ -0,0 +1,38 @@
+--- a/drivers/serial/8250.c
++++ b/drivers/serial/8250.c
+@@ -287,6 +287,13 @@ static const struct serial8250_config ua
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO,
+ },
++ [PORT_AR7] = {
++ .name = "TI-AR7",
++ .fifo_size = 16,
++ .tx_loadsz = 16,
++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
++ .flags = UART_CAP_FIFO | UART_CAP_AFE,
++ },
+ };
+
+ #if defined (CONFIG_SERIAL_8250_AU1X00)
+@@ -2702,7 +2709,11 @@ static void serial8250_console_putchar(s
+ {
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+
++#ifdef CONFIG_AR7
++ wait_for_xmitr(up, BOTH_EMPTY);
++#else
+ wait_for_xmitr(up, UART_LSR_THRE);
++#endif
+ serial_out(up, UART_TX, ch);
+ }
+
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -41,6 +41,7 @@
+ #define PORT_XSCALE 15
+ #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
+ #define PORT_OCTEON 17 /* Cavium OCTEON internal UART */
++#define PORT_AR7 18 /* TI AR7 internal UART */
+ #define PORT_MAX_8250 17 /* max port ID */
+
+ /*
diff --git a/target/linux/ar7/patches-2.6.30/900-cpmac_multiqueue.patch b/target/linux/ar7/patches-2.6.30/900-cpmac_multiqueue.patch
new file mode 100644
index 0000000000..3df3d68324
--- /dev/null
+++ b/target/linux/ar7/patches-2.6.30/900-cpmac_multiqueue.patch
@@ -0,0 +1,70 @@
+This patch fixes the network driver cpmac.c for compilation with
+configuration option CONFIG_NETDEVICES_MULTIQUEUE.
+
+These compiler warnings are fixed by the patch:
+drivers/net/cpmac.c: In function 'cpmac_end_xmit':
+drivers/net/cpmac.c:630: warning: passing argument 2 of 'netif_subqueue_stopped' makes pointer from integer without a cast
+drivers/net/cpmac.c:641: warning: passing argument 2 of 'netif_subqueue_stopped' makes pointer from integer without a cast
+drivers/net/cpmac.c: In function 'cpmac_probe':
+drivers/net/cpmac.c:1128: warning: unused variable 'i'
+
+During runtime, the unpatched driver raises a fatal runtime exception.
+This is fixed by calling __netif_subqueue_stopped instead
+of netif_subqueue_stopped, too.
+
+Two additional code parts were modified for CONFIG_NETDEVICES_MULTIQUEUE
+because other drivers do it in the same way.
+
+ Signed-off-by: Stefan Weil <weil@mail.berlios.de>
+
+--- a/drivers/net/cpmac.c
++++ b/drivers/net/cpmac.c
+@@ -615,13 +615,13 @@ static void cpmac_end_xmit(struct net_de
+
+ dev_kfree_skb_irq(desc->skb);
+ desc->skb = NULL;
+- if (netif_subqueue_stopped(dev, queue))
++ if (__netif_subqueue_stopped(dev, queue))
+ netif_wake_subqueue(dev, queue);
+ } else {
+ if (netif_msg_tx_err(priv) && net_ratelimit())
+ printk(KERN_WARNING
+ "%s: end_xmit: spurious interrupt\n", dev->name);
+- if (netif_subqueue_stopped(dev, queue))
++ if (__netif_subqueue_stopped(dev, queue))
+ netif_wake_subqueue(dev, queue);
+ }
+ }
+@@ -731,7 +731,6 @@ static void cpmac_clear_tx(struct net_de
+
+ static void cpmac_hw_error(struct work_struct *work)
+ {
+- int i;
+ struct cpmac_priv *priv =
+ container_of(work, struct cpmac_priv, reset_work);
+
+@@ -818,7 +817,6 @@ static irqreturn_t cpmac_irq(int irq, vo
+
+ static void cpmac_tx_timeout(struct net_device *dev)
+ {
+- int i;
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ spin_lock(&priv->lock);
+@@ -1097,7 +1095,7 @@ static int external_switch;
+
+ static int __devinit cpmac_probe(struct platform_device *pdev)
+ {
+- int rc, phy_id, i;
++ int rc, phy_id;
+ char *mdio_bus_id = "0";
+ struct resource *mem;
+ struct cpmac_priv *priv;
+@@ -1125,6 +1123,7 @@ static int __devinit cpmac_probe(struct
+ }
+
+ dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
++ //~ dev = alloc_etherdev(sizeof(*priv));
+
+ if (!dev) {
+ printk(KERN_ERR "cpmac: Unable to allocate net_device\n");