diff options
Diffstat (limited to 'target/linux/ar71xx')
-rw-r--r-- | target/linux/ar71xx/base-files/etc/defconfig/ap96/network | 16 | ||||
-rwxr-xr-x | target/linux/ar71xx/base-files/etc/diag.sh | 3 | ||||
-rwxr-xr-x | target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 | ||||
-rw-r--r-- | target/linux/ar71xx/config-2.6.32 | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/config-2.6.33 | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/config-2.6.34 | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/config-2.6.35 | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig | 9 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ar71xx/Makefile | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap96.c | 175 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/generic/profiles/atheros.mk | 11 | ||||
-rw-r--r-- | target/linux/ar71xx/image/Makefile | 5 |
13 files changed, 228 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/defconfig/ap96/network b/target/linux/ar71xx/base-files/etc/defconfig/ap96/network new file mode 100644 index 0000000000..2d4d8e0121 --- /dev/null +++ b/target/linux/ar71xx/base-files/etc/defconfig/ap96/network @@ -0,0 +1,16 @@ +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + +config interface wan + option ifname eth1 + option proto dhcp diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index b1e1d2312b..a26a4cbdad 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -36,6 +36,9 @@ get_status_led() { ap83) status_led="ap83:green:power" ;; + ap96) + status_led="ap96:green:led2" + ;; aw-nr580) status_led="aw-nr580:green:ready" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 4b08e93c18..877bab2533 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -16,6 +16,9 @@ ar71xx_board_name() { *AP83) name="ap83" ;; + *AP96) + name="ap96" + ;; *AW-NR580) name="aw-nr580" ;; diff --git a/target/linux/ar71xx/config-2.6.32 b/target/linux/ar71xx/config-2.6.32 index b3ed8917a3..1c464f8458 100644 --- a/target/linux/ar71xx/config-2.6.32 +++ b/target/linux/ar71xx/config-2.6.32 @@ -19,6 +19,7 @@ CONFIG_AR71XX_DEV_PB9X_PCI=y CONFIG_AR71XX_DEV_USB=y CONFIG_AR71XX_MACH_AP81=y CONFIG_AR71XX_MACH_AP83=y +CONFIG_AR71XX_MACH_AP96=y CONFIG_AR71XX_MACH_AW_NR580=y CONFIG_AR71XX_MACH_DIR_600_A1=y CONFIG_AR71XX_MACH_DIR_615_C1=y diff --git a/target/linux/ar71xx/config-2.6.33 b/target/linux/ar71xx/config-2.6.33 index e27fb2a251..ea56d706e9 100644 --- a/target/linux/ar71xx/config-2.6.33 +++ b/target/linux/ar71xx/config-2.6.33 @@ -19,6 +19,7 @@ CONFIG_AR71XX_DEV_PB9X_PCI=y CONFIG_AR71XX_DEV_USB=y CONFIG_AR71XX_MACH_AP81=y CONFIG_AR71XX_MACH_AP83=y +CONFIG_AR71XX_MACH_AP96=y CONFIG_AR71XX_MACH_AW_NR580=y CONFIG_AR71XX_MACH_DIR_600_A1=y CONFIG_AR71XX_MACH_DIR_615_C1=y diff --git a/target/linux/ar71xx/config-2.6.34 b/target/linux/ar71xx/config-2.6.34 index 6632d501df..81ccd6ba67 100644 --- a/target/linux/ar71xx/config-2.6.34 +++ b/target/linux/ar71xx/config-2.6.34 @@ -19,6 +19,7 @@ CONFIG_AR71XX_DEV_PB9X_PCI=y CONFIG_AR71XX_DEV_USB=y CONFIG_AR71XX_MACH_AP81=y CONFIG_AR71XX_MACH_AP83=y +CONFIG_AR71XX_MACH_AP96=y CONFIG_AR71XX_MACH_AW_NR580=y CONFIG_AR71XX_MACH_DIR_600_A1=y CONFIG_AR71XX_MACH_DIR_615_C1=y diff --git a/target/linux/ar71xx/config-2.6.35 b/target/linux/ar71xx/config-2.6.35 index 6632d501df..81ccd6ba67 100644 --- a/target/linux/ar71xx/config-2.6.35 +++ b/target/linux/ar71xx/config-2.6.35 @@ -19,6 +19,7 @@ CONFIG_AR71XX_DEV_PB9X_PCI=y CONFIG_AR71XX_DEV_USB=y CONFIG_AR71XX_MACH_AP81=y CONFIG_AR71XX_MACH_AP83=y +CONFIG_AR71XX_MACH_AP96=y CONFIG_AR71XX_MACH_AW_NR580=y CONFIG_AR71XX_MACH_DIR_600_A1=y CONFIG_AR71XX_MACH_DIR_615_C1=y diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig index 1657ffa0a8..2b4c3bdcf0 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig @@ -19,6 +19,15 @@ config AR71XX_MACH_AP83 select AR71XX_DEV_USB default n +config AR71XX_MACH_AP96 + bool "Atheros AP96 board support" + select AR71XX_DEV_M25P80 + select AR71XX_DEV_AP94_PCI if PCI + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + default n + config AR71XX_MACH_DIR_600_A1 bool "D-Link DIR-600 rev. A1 support" select AR71XX_DEV_AP91_ETH diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile index b9c368e1ab..81dab7c711 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_AR71XX_NVRAM) += nvram.o obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o +obj-$(CONFIG_AR71XX_MACH_AP96) += mach-ap96.o obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap96.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap96.c new file mode 100644 index 0000000000..6a7b6ff1cb --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap96.c @@ -0,0 +1,175 @@ +/* + * Atheros AP96 board support + * + * Copyright (C) 2009 Marco Porsch + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Atheros Communications + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> + +#include <asm/mach-ar71xx/ar71xx.h> + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap94-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define AP96_GPIO_LED_12_GREEN 0 +#define AP96_GPIO_LED_3_GREEN 1 +#define AP96_GPIO_LED_2_GREEN 2 +#define AP96_GPIO_LED_WPS_GREEN 4 +#define AP96_GPIO_LED_5_GREEN 5 +#define AP96_GPIO_LED_4_ORANGE 6 + +/* Reset button - next to the power connector */ +#define AP96_GPIO_BTN_RESET 3 +/* WPS button - next to a led on right */ +#define AP96_GPIO_BTN_WPS 8 + +#define AP96_BUTTONS_POLL_INTERVAL 20 + +#define AP96_WMAC0_MAC_OFFSET 0x120c +#define AP96_WMAC1_MAC_OFFSET 0x520c +#define AP96_CALDATA0_OFFSET 0x1000 +#define AP96_CALDATA1_OFFSET 0x5000 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition ap96_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "rootfs", + .offset = 0x040000, + .size = 0x600000, + } , { + .name = "uImage", + .offset = 0x640000, + .size = 0x1b0000, + } , { + .name = "caldata", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data ap96_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = ap96_partitions, + .nr_parts = ARRAY_SIZE(ap96_partitions), +#endif +}; + +/* + * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12 + * below (from left to right on the board). Led 1 seems to be on whenever the + * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange; + * others are green. + * + * In addition, there is one led next to a button on the right side for WPS. + */ +static struct gpio_led ap96_leds_gpio[] __initdata = { + { + .name = "ap96:green:led2", + .gpio = AP96_GPIO_LED_2_GREEN, + .active_low = 1, + }, { + .name = "ap96:green:led3", + .gpio = AP96_GPIO_LED_3_GREEN, + .active_low = 1, + }, { + .name = "ap96:orange:led4", + .gpio = AP96_GPIO_LED_4_ORANGE, + .active_low = 1, + }, { + .name = "ap96:green:led5", + .gpio = AP96_GPIO_LED_5_GREEN, + .active_low = 1, + }, { + .name = "ap96:green:led12", + .gpio = AP96_GPIO_LED_12_GREEN, + .active_low = 1, + }, { /* next to a button on right */ + .name = "ap96:green:wps", + .gpio = AP96_GPIO_LED_WPS_GREEN, + .active_low = 1, + } +}; + +static struct gpio_button ap96_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + .gpio = AP96_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .threshold = 3, + .gpio = AP96_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init ap96_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ar71xx_add_device_mdio(0xfffffffe); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.phy_mask = 0x1; + + ar71xx_add_device_eth(0); + + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth1_data.speed = SPEED_1000; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + + ar71xx_eth1_pll_data.pll_1000 = 0x1f000000; + + ar71xx_add_device_eth(1); + + ar71xx_add_device_usb(); + + ar71xx_add_device_m25p80(&ap96_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio), + ap96_leds_gpio); + + ar71xx_add_device_gpio_buttons(-1, AP96_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(ap96_gpio_buttons), + ap96_gpio_buttons); + + ap94_pci_init(art + AP96_CALDATA0_OFFSET, + art + AP96_WMAC0_MAC_OFFSET, + art + AP96_CALDATA1_OFFSET, + art + AP96_WMAC1_MAC_OFFSET); +} + +MIPS_MACHINE(AR71XX_MACH_AP96, "AP96", "Atheros AP96", ap96_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h index b530abfe41..fde4717a95 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h @@ -58,6 +58,7 @@ enum ar71xx_mach_type { AR71XX_MACH_EAP7660D, /* Senao EAP7660D */ AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ + AR71XX_MACH_AP96, /* Atheros AP96 */ }; #endif /* _AR71XX_MACHTYPE_H */ diff --git a/target/linux/ar71xx/generic/profiles/atheros.mk b/target/linux/ar71xx/generic/profiles/atheros.mk index 4ce0e605c6..97d5032574 100644 --- a/target/linux/ar71xx/generic/profiles/atheros.mk +++ b/target/linux/ar71xx/generic/profiles/atheros.mk @@ -28,6 +28,17 @@ endef $(eval $(call Profile,AP83)) +define Profile/AP96 + NAME:=Atheros AP96 reference board + PACKAGES:=wpad-mini kmod-ath9k kmod-usb-core kmod-usb2 +endef + +define Profile/AP96/Description + Package set optimized for the Atheros AP96 reference board. +endef + +$(eval $(call Profile,AP96)) + define Profile/PB42 NAME:=Atheros PB42 reference board PACKAGES:=wpad-mini kmod-ath9k kmod-usb-core kmod-usb-ohci kmod-usb2 diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 718b7e3ad1..3fa49ba36e 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -571,6 +571,10 @@ define Image/Build/Profile/WNDR3700 $(call Image/Build/Template/$(fs_64k)/$(1),WNDR3700,wndr3700,board=WNDR3700) endef +define Image/Build/Profile/AP96 + $(call Image/Build/Template/$(fs_64k)/$(1),AP83,ap96,board=AP96) +endef + define Image/Build/Profile/WRT400N $(call Image/Build/Template/$(fs_64k)/$(1),WRT400N,wrt400n,board=WRT400N) endef @@ -623,6 +627,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/UBNT,$(1)) $(call Image/Build/Profile/WP543,$(1)) $(call Image/Build/Profile/WNDR3700,$(1)) + $(call Image/Build/Profile/AP96,$(1)) $(call Image/Build/Profile/WRT400N,$(1)) $(call Image/Build/Profile/WRT160NL,$(1)) $(call Image/Build/Profile/WZRHPG300NH,$(1)) |