diff options
Diffstat (limited to 'target/linux/ar71xx')
9 files changed, 261 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index 599fc1920b..3547f49de4 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -432,6 +432,16 @@ wlae-ag300n) ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0" ;; +wnr2000-v4) + ucidef_set_led_netdev "wan" "WAN" "wnr2000-v4:green:wan" "eth1" + ucidef_set_led_netdev "wlan" "WLAN" "wnr2000-v4:blue:wlan" "wlan0" + ucidef_set_led_switch "lan1" "LAN1" "wnr2000-v4:amber:lan1" "switch0" "0x04" + ucidef_set_led_switch "lan2" "LAN2" "wnr2000-v4:amber:lan2" "switch0" "0x08" + ucidef_set_led_switch "lan3" "LAN3" "wnr2000-v4:amber:lan3" "switch0" "0x10" + ucidef_set_led_switch "lan4" "LAN4" "wnr2000-v4:amber:lan4" "switch0" "0x02" + ucidef_set_led_usbdev "usb" "USB" "wnr2000-v4:amber:status" "1-1" + ;; + wzr-hp-ag300h) ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0" ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 743f9de124..af8725e897 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -206,6 +206,7 @@ tl-mr3420-v2 |\ tl-wr841n-v8 |\ tl-wr842n-v2 |\ wnr2000-v3 |\ +wnr2000-v4 |\ wnr2200 |\ wnr612-v2) ucidef_set_interfaces_lan_wan "eth1" "eth0" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 40e930360c..a3cefc5043 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -698,6 +698,9 @@ ar71xx_board_detect() { *"WNDR4300") name="wndr4300" ;; + *"WNR2000 V4") + name="wnr2000-v4" + ;; *"WNR2000 V3") name="wnr2000-v3" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 6220f16a7e..7a02e37d22 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -385,6 +385,14 @@ platform_check_image() { fi return 0 ;; + wnr2000-v4) + [ "$magic_long" != "32303034" ] && { + echo "Invalid image type." + return 1 + } + return 0 + ;; + esac echo "Sysupgrade is not yet supported on $board." diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10 index 1b3eddbb99..f2922c48d8 100644 --- a/target/linux/ar71xx/config-3.10 +++ b/target/linux/ar71xx/config-3.10 @@ -118,6 +118,7 @@ CONFIG_ATH79_MACH_WNDR3700=y CONFIG_ATH79_MACH_WNDR4300=y CONFIG_ATH79_MACH_WNR2000=y CONFIG_ATH79_MACH_WNR2000_V3=y +CONFIG_ATH79_MACH_WNR2000_V4=y CONFIG_ATH79_MACH_WNR2200=y CONFIG_ATH79_MACH_WP543=y CONFIG_ATH79_MACH_WPE72=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c new file mode 100644 index 0000000000..d8437dce4d --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c @@ -0,0 +1,175 @@ +/* + * NETGEAR WNR2000v4 board support + * + * Copytight (C) 2014 Michaël Burtin <mburtin@gmail.com> + * Copytight (C) 2013 Mathieu Olivari <mathieu.olivari@gmail.com> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +/* AR9341 GPIOs */ +#define WNR2000V4_GPIO_LED_WAN_AMBER 22 +#define WNR2000V4_GPIO_LED_WAN_GREEN 17 +#define WNR2000V4_GPIO_LED_WPS 2 +#define WNR2000V4_GPIO_LED_WLAN 12 +#define WNR2000V4_GPIO_LED_LAN1 18 +#define WNR2000V4_GPIO_LED_LAN2 19 +#define WNR2000V4_GPIO_LED_LAN3 20 +#define WNR2000V4_GPIO_LED_LAN4 21 +#define STATUS_LED_GPIO 1 +#define WNR2000V4_GPIO_LED_PWR_GREEN 0 + +#define WNR2000V4_GPIO_BTN_WPS 3 +#define WNR2000V4_GPIO_BTN_RESET 4 +#define WNR2000V4_GPIO_BTN_WLAN 11 + +#define WNR2000V4_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WNR2000V4_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000V4_KEYS_POLL_INTERVAL) + +#define WNR2000V4_MAC0_OFFSET 0 +#define WNR2000V4_MAC1_OFFSET 6 + +static struct gpio_led wnr2000v4_leds_gpio[] __initdata = { + { + .name = "wnr2000-v4:green:power", + .gpio = WNR2000V4_GPIO_LED_PWR_GREEN, + .active_low = 1, + .default_trigger = "default-on", + }, { + .name = "wnr2000-v4:green:wan", + .gpio = WNR2000V4_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, + { + .name = "wnr2000-v4:green:wps", + .gpio = WNR2000V4_GPIO_LED_WPS, + .active_low = 1, + }, + { + .name = "wnr2000-v4:amber:status", + .gpio = STATUS_LED_GPIO, + .active_low = 1, + }, + { + .name = "wnr2000-v4:blue:wlan", + .gpio = WNR2000V4_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "wnr2000-v4:amber:lan1", + .gpio = WNR2000V4_GPIO_LED_LAN1, + .active_low = 1, + }, { + .name = "wnr2000-v4:amber:lan2", + .gpio = WNR2000V4_GPIO_LED_LAN2, + .active_low = 1, + }, { + .name = "wnr2000-v4:amber:lan3", + .gpio = WNR2000V4_GPIO_LED_LAN3, + .active_low = 1, + }, { + .name = "wnr2000-v4:amber:lan4", + .gpio = WNR2000V4_GPIO_LED_LAN4, + .active_low = 1, + } +}; + +static struct gpio_keys_button wnr2000v4_gpio_keys[] __initdata = { + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNR2000V4_GPIO_BTN_WPS, + }, + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNR2000V4_GPIO_BTN_RESET, + }, + { + .desc = "WLAN button", + .type = EV_KEY, + .code = KEY_WLAN, + .debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL, + .gpio = WNR2000V4_GPIO_BTN_WLAN, + }, +}; + +static void __init wnr_common_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(NULL); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE | + AR934X_ETH_CFG_SW_PHY_SWAP); + + ath79_register_mdio(1, 0x0); + + /* LAN */ + ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2000V4_MAC0_OFFSET, 0); + + /* GMAC1 is connected to the internal switch */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_register_eth(1); + + /* WAN */ + ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2000V4_MAC1_OFFSET, 0); + + /* GMAC0 is connected to the PHY0 of the internal switch */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(4); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + + ath79_register_eth(0); + + /* WLAN */ + ath79_register_wmac(ee, art+WNR2000V4_MAC0_OFFSET); + + /* USB */ + ath79_register_usb(); +} + +static void __init wnr2000v4_setup(void) +{ + wnr_common_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v4_leds_gpio), + wnr2000v4_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WNR2000V4_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wnr2000v4_gpio_keys), + wnr2000v4_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_WNR2000_V4, "WNR2000V4", "NETGEAR WNR2000 V4", wnr2000v4_setup); diff --git a/target/linux/ar71xx/generic/profiles/netgear.mk b/target/linux/ar71xx/generic/profiles/netgear.mk index 78717a0a83..e8a2a3fbe6 100644 --- a/target/linux/ar71xx/generic/profiles/netgear.mk +++ b/target/linux/ar71xx/generic/profiles/netgear.mk @@ -39,6 +39,18 @@ endef $(eval $(call Profile,WNR2000V3)) +define Profile/WNR2000V4 + NAME:=NETGEAR WNR2000V4 + PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev +endef + +define Profile/WNR2000V4/Description + Package set optimized for the NETGEAR WNR2000V4 +endef + +$(eval $(call Profile,WNR2000V4)) + + define Profile/WNR612V2 NAME:=NETGEAR WNR612V2 / On Networks N150 endef diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 3256cb8bb5..8ab68f0e17 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -298,6 +298,7 @@ wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel) wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware) wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro +wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro wndr3700_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro wndr3700v2_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) @@ -888,6 +889,16 @@ define Image/Build/Netgear fi endef + +Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) +Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5)) + +define Image/Build/NetgearLzma + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64) +endef + + Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) # $(1): (empty) @@ -1148,6 +1159,7 @@ $(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8 $(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M)) $(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,)) +$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,)) $(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,WNR2200,"" NA,)) $(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",)) $(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",)) diff --git a/target/linux/ar71xx/patches-3.10/634-MIPS-ath79-WNR2000V4-support.patch b/target/linux/ar71xx/patches-3.10/634-MIPS-ath79-WNR2000V4-support.patch new file mode 100644 index 0000000000..270095a962 --- /dev/null +++ b/target/linux/ar71xx/patches-3.10/634-MIPS-ath79-WNR2000V4-support.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -470,6 +470,16 @@ config ATH79_MACH_WNR2000_V3 + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + ++config ATH79_MACH_WNR2000_V4 ++ bool "NETGEAR WNR2000 V4" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_OM2P + bool "OpenMesh OM2P board support" + select SOC_AR724X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -113,6 +113,7 @@ obj-$(CONFIG_ATH79_MACH_WNDR3700) += mac + obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o + obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o + obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o ++obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o + obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o + obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o + obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -138,6 +138,7 @@ enum ath79_mach_type { + ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */ + ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */ + ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */ ++ ATH79_MACH_WNR2000_V4, /* NETGEAR WNR2000 v4 */ + ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */ + ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */ + ATH79_MACH_WP543, /* Compex WP543 */ |